def setup(self):
#(self, mapclass=NCP01map(), design=True, thermo_data=species_data.janaf, elements=AIR_MIX, bleeds=[],statics=True):
map_data = self.options['map_data']
interp_method = self.options['map_interp_method']
map_extrap = self.options['map_extrap']
# self.linear_solver = ScipyGMRES()
# self.linear_solver.options['atol'] = 2e-8
# self.linear_solver.options['maxiter'] = 100
# self.linear_solver.options['restart'] = 100
# self.nonlinear_solver = Newton()
# self.nonlinear_solver.options['utol'] = 1e-9
design = self.options['design']
bleeds = self.options['bleed_names']
thermo_data = self.options['thermo_data']
elements = self.options['elements']
statics = self.options['statics']
thermo = species_data.Thermo(thermo_data, init_reacts=elements)
num_prod = thermo.num_prod
# Create inlet flow station
flow_in = FlowIn(fl_name='Fl_I', num_prods=num_prod)
self.add_subsystem('flow_in', flow_in, promotes_inputs=['Fl_I:*'])
self.add_subsystem('corrinputs',
CorrectedInputsCalc(),
promotes_inputs=('Nmech', ('W_in', 'Fl_I:stat:W'),
('Pt', 'Fl_I:tot:P'),
('Tt', 'Fl_I:tot:T')),
promotes_outputs=('Nc', 'Wc'))
map_calcs = CompressorMap(map_data=self.options['map_data'],
design=design,
interp_method=interp_method,
extrap=map_extrap)
self.add_subsystem('map',
map_calcs,
promotes=[
's_Nc', 's_eff', 's_Wc', 's_PR', 'Nc', 'Wc',
'PR', 'eff', 'SMN', 'SMW'
])
# Calculate pressure rise across compressor
self.add_subsystem('press_rise',
PressureRise(),
promotes_inputs=['PR', ('Pt_in', 'Fl_I:tot:P')])
# Calculate ideal flow station properties
self.add_subsystem('ideal_flow',
SetTotal(thermo_data=thermo_data,
mode='S',
init_reacts=elements),
promotes_inputs=[('S', 'Fl_I:tot:S'),
('init_prod_amounts', 'Fl_I:tot:n')
])
self.connect("press_rise.Pt_out", "ideal_flow.P")
# Calculate enthalpy rise across compressor
self.add_subsystem("enth_rise",
EnthalpyRise(),
promotes_inputs=['eff', ('inlet_ht', 'Fl_I:tot:h')])
self.connect("ideal_flow.h", "enth_rise.ideal_ht")
# Calculate real flow station properties
real_flow = SetTotal(thermo_data=thermo_data,
mode='h',
init_reacts=elements,
fl_name="Fl_O:tot")
self.add_subsystem('real_flow',
real_flow,
promotes_inputs=[('init_prod_amounts', 'Fl_I:tot:n')
],
promotes_outputs=['Fl_O:tot:*'])
self.connect("enth_rise.ht_out", "real_flow.h")
self.connect("press_rise.Pt_out", "real_flow.P")
#clculate Polytropic Efficiency
self.add_subsystem(
'eff_poly_calc',
eff_poly_calc(),
promotes_inputs=[
('PR', 'PR'),
('S_in', 'Fl_I:tot:S'),
('S_out', 'Fl_O:tot:S'),
# ('Cp','Fl_I:tot:Cp'),
# ('Cv','Fl_I:tot:Cv'),
('Rt', 'Fl_I:tot:R')
],
promotes_outputs=['eff_poly'])
# Calculate shaft power consumption
blds_pwr = BleedsAndPower(bleed_names=bleeds)
bld_inputs = ['frac_W', 'frac_P', 'frac_work']
bld_in_vars = [
'{0}:{1}'.format(bn, in_name)
for bn, in_name in itertools.product(bleeds, bld_inputs)
]
bld_out_globs = ['{}:*'.format(bn) for bn in bleeds]
self.add_subsystem('blds_pwr',
blds_pwr,
promotes_inputs=[
'Nmech',
('W_in', 'Fl_I:stat:W'),
('ht_in', 'Fl_I:tot:h'),
('Pt_in', 'Fl_I:tot:P'),
('Pt_out', 'Fl_O:tot:P'),
] + bld_in_vars,
promotes_outputs=['power', 'trq', 'W_out'] +
bld_out_globs)
self.connect('enth_rise.ht_out', 'blds_pwr.ht_out')
bleed_names = []
for BN in bleeds:
bleed_names.append(BN + '_flow')
bleed_flow = SetTotal(thermo_data=thermo_data,
mode='h',
init_reacts=elements,
fl_name=BN + ":tot")
self.add_subsystem(BN + '_flow',
bleed_flow,
promotes_inputs=[('init_prod_amounts',
'Fl_I:tot:n')],
promotes_outputs=['{}:tot:*'.format(BN)])
self.connect(BN + ':ht', BN + "_flow.h")
self.connect(BN + ':Pt', BN + "_flow.P")
self.add_subsystem('FAR_passthru',
PassThrough('Fl_I:FAR', 'Fl_O:FAR', 0.0),
promotes=['*'])
if statics:
if design:
# Calculate static properties
out_stat = SetStatic(mode='MN',
thermo_data=thermo_data,
init_reacts=elements,
fl_name="Fl_O:stat")
self.add_subsystem('out_stat',
out_stat,
promotes_inputs=[
'MN',
('init_prod_amounts', 'Fl_I:tot:n')
],
promotes_outputs=['Fl_O:stat:*'])
self.connect('Fl_O:tot:S', 'out_stat.S')
self.connect('Fl_O:tot:h', 'out_stat.ht')
self.connect('W_out', 'out_stat.W')
self.connect('Fl_O:tot:P', 'out_stat.guess:Pt')
self.connect('Fl_O:tot:gamma', 'out_stat.guess:gamt')
else: # Calculate static properties
out_stat = SetStatic(mode='area',
thermo_data=thermo_data,
init_reacts=elements,
fl_name="Fl_O:stat")
self.add_subsystem('out_stat',
out_stat,
promotes_inputs=[
'area',
('init_prod_amounts', 'Fl_I:tot:n')
],
promotes_outputs=['Fl_O:stat:*'])
self.connect('Fl_O:tot:S', 'out_stat.S')
self.connect('Fl_O:tot:h', 'out_stat.ht')
self.connect('W_out', 'out_stat.W')
self.connect('Fl_O:tot:P', 'out_stat.guess:Pt')
self.connect('Fl_O:tot:gamma', 'out_stat.guess:gamt')
self.set_order([
'flow_in', 'corrinputs', 'map', 'press_rise', 'ideal_flow',
'enth_rise', 'real_flow', 'eff_poly_calc', 'blds_pwr',
'FAR_passthru'
] + bleed_names + ['out_stat'])
else:
self.add_subsystem('W_passthru',
PassThrough('W_out',
'Fl_O:stat:W',
1.0,
units="lbm/s"),
promotes=['*'])
self.set_order([
'flow_in', 'corrinputs', 'map', 'press_rise', 'ideal_flow',
'enth_rise', 'real_flow', 'eff_poly_calc', 'blds_pwr',
'FAR_passthru'
] + bleed_names + ['W_passthru'])
def setup(self):
thermo_method = self.options['thermo_method']
thermo_data = self.options['thermo_data']
elements = self.options['elements']
statics = self.options['statics']
design = self.options['design']
num_element = len(elements)
# Create inlet flow station
flow_in = FlowIn(fl_name='Fl_I')
self.add_subsystem('flow_in',
flow_in,
promotes=['Fl_I:tot:*', 'Fl_I:stat:*'])
# Perform inlet engineering calculations
self.add_subsystem('calcs_inlet',
Calcs(),
promotes_inputs=[
'ram_recovery', ('Pt_in', 'Fl_I:tot:P'),
('V_in', 'Fl_I:stat:V'), ('W_in', 'Fl_I:stat:W')
],
promotes_outputs=['F_ram'])
# Calculate real flow station properties
real_flow = Thermo(mode='total_TP',
fl_name='Fl_O:tot',
method=thermo_method,
thermo_kwargs={
'elements': elements,
'spec': thermo_data
})
self.add_subsystem('real_flow',
real_flow,
promotes_inputs=[('T', 'Fl_I:tot:T'),
('composition',
'Fl_I:tot:composition')],
promotes_outputs=['Fl_O:*'])
self.connect("calcs_inlet.Pt_out", "real_flow.P")
if statics:
if design:
# Calculate static properties
out_stat = Thermo(mode='static_MN',
fl_name='Fl_O:stat',
method=thermo_method,
thermo_kwargs={
'elements': elements,
'spec': thermo_data
})
self.add_subsystem('out_stat',
out_stat,
promotes_inputs=[
('composition', 'Fl_I:tot:composition'),
('W', 'Fl_I:stat:W'), 'MN'
],
promotes_outputs=['Fl_O:stat:*'])
self.connect('Fl_O:tot:S', 'out_stat.S')
self.connect('Fl_O:tot:h', 'out_stat.ht')
self.connect('Fl_O:tot:P', 'out_stat.guess:Pt')
self.connect('Fl_O:tot:gamma', 'out_stat.guess:gamt')
else:
# Calculate static properties
out_stat = Thermo(mode='static_A',
fl_name='Fl_O:stat',
method=thermo_method,
thermo_kwargs={
'elements': elements,
'spec': thermo_data
})
prom_in = [('composition', 'Fl_I:tot:composition'),
('W', 'Fl_I:stat:W'), 'area']
prom_out = ['Fl_O:stat:*']
self.add_subsystem('out_stat',
out_stat,
promotes_inputs=prom_in,
promotes_outputs=prom_out)
self.connect('Fl_O:tot:S', 'out_stat.S')
self.connect('Fl_O:tot:h', 'out_stat.ht')
self.connect('Fl_O:tot:P', 'out_stat.guess:Pt')
self.connect('Fl_O:tot:gamma', 'out_stat.guess:gamt')
else:
self.add_subsystem('W_passthru',
PassThrough('Fl_I:stat:W',
'Fl_O:stat:W',
0.0,
units="lbm/s"),
promotes=['*'])
def setup(self):
thermo_data = self.options['thermo_data']
elements = self.options['elements']
statics = self.options['statics']
design = self.options['design']
num_prod = species_data.Thermo(thermo_data,
init_reacts=elements).num_prod
# Create inlet flowstation
flow_in = FlowIn(fl_name='Fl_I', num_prods=num_prod)
self.add_subsystem('flow_in', flow_in, promotes_inputs=('Fl_I:*', ))
# Split the flows
self.add_subsystem('split_calc',
BPRcalc(),
promotes_inputs=('BPR', ('W_in', 'Fl_I:stat:W')))
# Set Fl_out1 totals based on T, P
real_flow1 = SetTotal(thermo_data=thermo_data,
mode='T',
init_reacts=elements,
fl_name="Fl_O1:tot")
self.add_subsystem('real_flow1',
real_flow1,
promotes_inputs=(('init_prod_amounts',
'Fl_I:tot:n'), ('P',
'Fl_I:tot:P'),
('T', 'Fl_I:tot:T')),
promotes_outputs=('Fl_O1:tot:*', ))
# Set Fl_out2 totals based on T, P
real_flow2 = SetTotal(thermo_data=thermo_data,
mode='T',
init_reacts=elements,
fl_name="Fl_O2:tot")
self.add_subsystem('real_flow2',
real_flow2,
promotes_inputs=(('init_prod_amounts',
'Fl_I:tot:n'), ('P',
'Fl_I:tot:P'),
('T', 'Fl_I:tot:T')),
promotes_outputs=('Fl_O2:tot:*', ))
if statics:
if design:
# Calculate static properties
out1_stat = SetStatic(mode="MN",
thermo_data=thermo_data,
init_reacts=elements,
fl_name="Fl_O1:stat")
prom_in = [('init_prod_amounts', 'Fl_I:tot:n'), ('MN', 'MN1')]
prom_out = ['Fl_O1:stat:*']
self.add_subsystem('out1_stat',
out1_stat,
promotes_inputs=prom_in,
promotes_outputs=prom_out)
self.connect('Fl_O1:tot:S', 'out1_stat.S')
self.connect('Fl_O1:tot:h', 'out1_stat.ht')
self.connect('Fl_O1:tot:P', 'out1_stat.guess:Pt')
self.connect('Fl_O1:tot:gamma', 'out1_stat.guess:gamt')
self.connect('split_calc.W1', 'out1_stat.W')
out2_stat = SetStatic(mode="MN",
thermo_data=thermo_data,
init_reacts=elements,
fl_name="Fl_O2:stat")
prom_in = [('init_prod_amounts', 'Fl_I:tot:n'), ('MN', 'MN2')]
prom_out = ['Fl_O2:stat:*']
self.add_subsystem('out2_stat',
out2_stat,
promotes_inputs=prom_in,
promotes_outputs=prom_out)
self.connect('Fl_O2:tot:S', 'out2_stat.S')
self.connect('Fl_O2:tot:h', 'out2_stat.ht')
self.connect('Fl_O2:tot:P', 'out2_stat.guess:Pt')
self.connect('Fl_O2:tot:gamma', 'out2_stat.guess:gamt')
self.connect('split_calc.W2', 'out2_stat.W')
else:
# Calculate static properties
out1_stat = SetStatic(mode="area",
thermo_data=thermo_data,
init_reacts=elements,
fl_name="Fl_O1:stat")
prom_in = [('init_prod_amounts', 'Fl_I:tot:n'),
('area', 'area1')]
prom_out = ['Fl_O1:stat:*']
self.add_subsystem('out1_stat',
out1_stat,
promotes_inputs=prom_in,
promotes_outputs=prom_out)
self.connect('Fl_O1:tot:S', 'out1_stat.S')
self.connect('Fl_O1:tot:h', 'out1_stat.ht')
self.connect('Fl_O1:tot:P', 'out1_stat.guess:Pt')
self.connect('Fl_O1:tot:gamma', 'out1_stat.guess:gamt')
self.connect('split_calc.W1', 'out1_stat.W')
out2_stat = SetStatic(mode="area",
thermo_data=thermo_data,
init_reacts=elements,
fl_name="Fl_O2:stat")
prom_in = [('init_prod_amounts', 'Fl_I:tot:n'),
('area', 'area2')]
prom_out = ['Fl_O2:stat:*']
self.add_subsystem('out2_stat',
out2_stat,
promotes_inputs=prom_in,
promotes_outputs=prom_out)
self.connect('Fl_O2:tot:S', 'out2_stat.S')
self.connect('Fl_O2:tot:h', 'out2_stat.ht')
self.connect('Fl_O2:tot:P', 'out2_stat.guess:Pt')
self.connect('Fl_O2:tot:gamma', 'out2_stat.guess:gamt')
self.connect('split_calc.W2', 'out2_stat.W')
else:
self.add_subsystem('W1_passthru',
PassThrough('split_calc_W1',
'Fl_O1:stat:W',
1.0,
units="lbm/s"),
promotes=['*'])
self.add_subsystem('W2_passthru',
PassThrough('split_calc_W2',
'Fl_O2:stat:W',
1.0,
units="lbm/s"),
promotes=['*'])
self.connect('split_calc.W1', 'split_calc_W1')
self.connect('split_calc.W2', 'split_calc_W2')
def setup(self):
thermo_data = self.options['thermo_data']
elements = self.options['elements']
statics = self.options['statics']
design = self.options['design']
bleeds = self.options['bleed_names']
gas_thermo = species_data.Thermo(thermo_data, init_reacts=elements)
gas_prods = gas_thermo.products
num_prod = len(gas_prods)
# Create inlet flowstation
flow_in = FlowIn(fl_name='Fl_I', num_prods=num_prod)
self.add_subsystem('flow_in',
flow_in,
promotes=['Fl_I:tot:*', 'Fl_I:stat:*'])
# Bleed flow calculations
blds = BleedCalcs(bleed_names=bleeds)
bld_port_globs = ['{}:*'.format(bn) for bn in bleeds]
self.add_subsystem('bld_calcs',
blds,
promotes_inputs=[('W_in', 'Fl_I:stat:W'),
'*:frac_W'],
promotes_outputs=['W_out'] + bld_port_globs)
bleed_names = []
for BN in bleeds:
bleed_names.append(BN + '_flow')
bleed_flow = SetTotal(thermo_data=thermo_data,
mode='T',
init_reacts=elements,
fl_name=BN + ":tot")
self.add_subsystem(BN + '_flow',
bleed_flow,
promotes_inputs=[('init_prod_amounts',
'Fl_I:tot:n'),
('T', 'Fl_I:tot:T'),
('P', 'Fl_I:tot:P')],
promotes_outputs=['{}:tot:*'.format(BN)])
# Total Calc
real_flow = SetTotal(thermo_data=thermo_data,
mode='T',
init_reacts=elements,
fl_name="Fl_O:tot")
prom_in = [('init_prod_amounts', 'Fl_I:tot:n'), ('T', 'Fl_I:tot:T'),
('P', 'Fl_I:tot:P')]
self.add_subsystem('real_flow',
real_flow,
promotes_inputs=prom_in,
promotes_outputs=['Fl_O:*'])
if statics:
if design:
# Calculate static properties
out_stat = SetStatic(mode="MN",
thermo_data=thermo_data,
init_reacts=elements,
fl_name="Fl_O:stat")
prom_in = [('init_prod_amounts', 'Fl_I:tot:n'), 'MN']
prom_out = ['Fl_O:stat:*']
self.add_subsystem('out_stat',
out_stat,
promotes_inputs=prom_in,
promotes_outputs=prom_out)
self.connect('Fl_O:tot:S', 'out_stat.S')
self.connect('Fl_O:tot:h', 'out_stat.ht')
self.connect('Fl_O:tot:P', 'out_stat.guess:Pt')
self.connect('Fl_O:tot:gamma', 'out_stat.guess:gamt')
self.connect('W_out', 'out_stat.W')
else:
# Calculate static properties
out_stat = SetStatic(mode="area",
thermo_data=thermo_data,
init_reacts=elements,
fl_name="Fl_O:stat")
prom_in = [('init_prod_amounts', 'Fl_I:tot:n'), 'area']
prom_out = ['Fl_O:stat:*']
self.add_subsystem('out_stat',
out_stat,
promotes_inputs=prom_in,
promotes_outputs=prom_out)
self.connect('Fl_O:tot:S', 'out_stat.S')
self.connect('Fl_O:tot:h', 'out_stat.ht')
self.connect('Fl_O:tot:P', 'out_stat.guess:Pt')
self.connect('Fl_O:tot:gamma', 'out_stat.guess:gamt')
self.connect('W_out', 'out_stat.W')
else:
self.add_subsystem('W_passthru',
PassThrough('W_out',
'Fl_O:stat:W',
1.0,
units="lbm/s"),
promotes=['*'])
self.add_subsystem('FAR_passthru',
PassThrough('Fl_I:FAR', 'Fl_O:FAR', 0.0),
promotes=['*'])
def setup(self):
thermo_data = self.options['thermo_data']
elements = self.options['elements']
statics = self.options['statics']
design = self.options['design']
gas_thermo = species_data.Thermo(thermo_data, init_reacts=elements)
gas_prods = gas_thermo.products
num_prod = len(gas_prods)
# Create inlet flow station
flow_in = FlowIn(fl_name='Fl_I', num_prods=num_prod)
self.add_subsystem('flow_in',
flow_in,
promotes=['Fl_I:tot:*', 'Fl_I:stat:*'])
# Perform inlet engineering calculations
self.add_subsystem('calcs_inlet',
Calcs(),
promotes_inputs=[
'ram_recovery', ('Pt_in', 'Fl_I:tot:P'),
('V_in', 'Fl_I:stat:V'), ('W_in', 'Fl_I:stat:W')
],
promotes_outputs=['F_ram'])
# Calculate real flow station properties
real_flow = SetTotal(thermo_data=thermo_data,
mode="T",
init_reacts=elements,
fl_name="Fl_O:tot")
self.add_subsystem('real_flow',
real_flow,
promotes_inputs=[('T', 'Fl_I:tot:T'),
('init_prod_amounts', 'Fl_I:tot:n')
],
promotes_outputs=['Fl_O:*'])
self.connect("calcs_inlet.Pt_out", "real_flow.P")
self.add_subsystem('FAR_passthru',
PassThrough('Fl_I:FAR', 'Fl_O:FAR', 0.0),
promotes=['*'])
if statics:
if design:
# Calculate static properties
self.add_subsystem('out_stat',
SetStatic(mode="MN",
thermo_data=thermo_data,
init_reacts=elements,
fl_name="Fl_O:stat"),
promotes_inputs=[
('init_prod_amounts', 'Fl_I:tot:n'),
('W', 'Fl_I:stat:W'), 'MN'
],
promotes_outputs=['Fl_O:stat:*'])
self.connect('Fl_O:tot:S', 'out_stat.S')
self.connect('Fl_O:tot:h', 'out_stat.ht')
self.connect('Fl_O:tot:P', 'out_stat.guess:Pt')
self.connect('Fl_O:tot:gamma', 'out_stat.guess:gamt')
else:
# Calculate static properties
out_stat = SetStatic(mode="area",
thermo_data=thermo_data,
init_reacts=elements,
fl_name="Fl_O:stat")
prom_in = [('init_prod_amounts', 'Fl_I:tot:n'),
('W', 'Fl_I:stat:W'), 'area']
prom_out = ['Fl_O:stat:*']
self.add_subsystem('out_stat',
out_stat,
promotes_inputs=prom_in,
promotes_outputs=prom_out)
self.connect('Fl_O:tot:S', 'out_stat.S')
self.connect('Fl_O:tot:h', 'out_stat.ht')
self.connect('Fl_O:tot:P', 'out_stat.guess:Pt')
self.connect('Fl_O:tot:gamma', 'out_stat.guess:gamt')
else:
self.add_subsystem('W_passthru',
PassThrough('Fl_I:stat:W',
'Fl_O:stat:W',
0.0,
units="lbm/s"),
promotes=['*'])
def setup(self):
map_data = self.options['map_data']
interp_method = self.options['map_interp_method']
map_extrap = self.options['map_extrap']
# self.linear_solver = ScipyGMRES()
# self.linear_solver.options['atol'] = 2e-8
# self.linear_solver.options['maxiter'] = 100
# self.linear_solver.options['restart'] = 100
# self.nonlinear_solver = Newton()
# self.nonlinear_solver.options['utol'] = 1e-9
thermo_method = self.options['thermo_method']
design = self.options['design']
bleeds = self.options['bleed_names']
thermo_data = self.options['thermo_data']
statics = self.options['statics']
composition = self.Fl_I_data['Fl_I']
# Create inlet flow station
flow_in = FlowIn(fl_name='Fl_I')
self.add_subsystem('flow_in', flow_in, promotes_inputs=['Fl_I:*'])
self.add_subsystem('corrinputs',
CorrectedInputsCalc(),
promotes_inputs=('Nmech', ('W_in', 'Fl_I:stat:W'),
('Pt', 'Fl_I:tot:P'),
('Tt', 'Fl_I:tot:T')),
promotes_outputs=('Nc', 'Wc'))
map_calcs = CompressorMap(map_data=self.options['map_data'],
design=design,
interp_method=interp_method,
extrap=map_extrap)
self.add_subsystem('map',
map_calcs,
promotes=[
's_Nc', 's_eff', 's_Wc', 's_PR', 'Nc', 'Wc',
'PR', 'eff', 'SMN', 'SMW'
])
# Calculate pressure rise across compressor
self.add_subsystem('press_rise',
PressureRise(),
promotes_inputs=['PR', ('Pt_in', 'Fl_I:tot:P')])
# Calculate ideal flow station properties
ideal_flow = Thermo(mode='total_SP',
method=thermo_method,
thermo_kwargs={
'composition': composition,
'spec': thermo_data
})
self.add_subsystem('ideal_flow',
ideal_flow,
promotes_inputs=[('S', 'Fl_I:tot:S'),
('composition',
'Fl_I:tot:composition')])
self.connect("press_rise.Pt_out", "ideal_flow.P")
# Calculate enthalpy rise across compressor
self.add_subsystem("enth_rise",
EnthalpyRise(),
promotes_inputs=['eff', ('inlet_ht', 'Fl_I:tot:h')])
self.connect("ideal_flow.h", "enth_rise.ideal_ht")
# Calculate real flow station properties
real_flow = Thermo(mode='total_hP',
fl_name='Fl_O:tot',
method=thermo_method,
thermo_kwargs={
'composition': composition,
'spec': thermo_data
})
self.add_subsystem('real_flow',
real_flow,
promotes_inputs=[('composition',
'Fl_I:tot:composition')],
promotes_outputs=['Fl_O:tot:*'])
self.connect("enth_rise.ht_out", "real_flow.h")
self.connect("press_rise.Pt_out", "real_flow.P")
#clculate Polytropic Efficiency
self.add_subsystem(
'eff_poly_calc',
eff_poly_calc(),
promotes_inputs=[
('PR', 'PR'),
('S_in', 'Fl_I:tot:S'),
('S_out', 'Fl_O:tot:S'),
# ('Cp','Fl_I:tot:Cp'),
# ('Cv','Fl_I:tot:Cv'),
('Rt', 'Fl_I:tot:R')
],
promotes_outputs=['eff_poly'])
# Calculate shaft power consumption
blds_pwr = BleedsAndPower(bleed_names=bleeds)
bld_inputs = ['frac_W', 'frac_P', 'frac_work']
bld_in_vars = [
'{0}:{1}'.format(bn, in_name)
for bn, in_name in itertools.product(bleeds, bld_inputs)
]
bld_out_globs = ['{}:*'.format(bn) for bn in bleeds]
self.add_subsystem('blds_pwr',
blds_pwr,
promotes_inputs=[
'Nmech',
('W_in', 'Fl_I:stat:W'),
('ht_in', 'Fl_I:tot:h'),
('Pt_in', 'Fl_I:tot:P'),
('Pt_out', 'Fl_O:tot:P'),
] + bld_in_vars,
promotes_outputs=['power', 'trq', 'W_out'] +
bld_out_globs)
self.connect('enth_rise.ht_out', 'blds_pwr.ht_out')
bleed_names = []
for BN in bleeds:
bleed_names.append(f'{BN}_flow')
bleed_flow = Thermo(mode='total_hP',
fl_name=BN + ":tot",
method=thermo_method,
thermo_kwargs={
'composition': composition,
'spec': thermo_data
})
self.add_subsystem(BN + '_flow',
bleed_flow,
promotes_inputs=[('composition',
'Fl_I:tot:composition')],
promotes_outputs=[f'{BN}:tot:*'])
self.connect(BN + ':ht', BN + "_flow.h")
self.connect(BN + ':Pt', BN + "_flow.P")
if statics:
if design:
# Calculate static properties
out_stat = Thermo(mode='static_MN',
fl_name='Fl_O:stat',
method=thermo_method,
thermo_kwargs={
'composition': composition,
'spec': thermo_data
})
self.add_subsystem('out_stat',
out_stat,
promotes_inputs=[
'MN',
('composition', 'Fl_I:tot:composition')
],
promotes_outputs=['Fl_O:stat:*'])
self.connect('Fl_O:tot:S', 'out_stat.S')
self.connect('Fl_O:tot:h', 'out_stat.ht')
self.connect('W_out', 'out_stat.W')
self.connect('Fl_O:tot:P', 'out_stat.guess:Pt')
self.connect('Fl_O:tot:gamma', 'out_stat.guess:gamt')
else: # Calculate static properties
out_stat = Thermo(mode='static_A',
fl_name='Fl_O:stat',
method=thermo_method,
thermo_kwargs={
'composition': composition,
'spec': thermo_data
})
self.add_subsystem('out_stat',
out_stat,
promotes_inputs=[
'area',
('composition', 'Fl_I:tot:composition')
],
promotes_outputs=['Fl_O:stat:*'])
self.connect('Fl_O:tot:S', 'out_stat.S')
self.connect('Fl_O:tot:h', 'out_stat.ht')
self.connect('W_out', 'out_stat.W')
self.connect('Fl_O:tot:P', 'out_stat.guess:Pt')
self.connect('Fl_O:tot:gamma', 'out_stat.guess:gamt')
self.set_order([
'flow_in',
'corrinputs',
'map',
'press_rise',
'ideal_flow',
'enth_rise',
'real_flow',
'eff_poly_calc',
'blds_pwr',
] + bleed_names + ['out_stat'])
else:
self.add_subsystem('W_passthru',
PassThrough('W_out',
'Fl_O:stat:W',
1.0,
units="lbm/s"),
promotes=['*'])
self.set_order([
'flow_in', 'corrinputs', 'map', 'press_rise', 'ideal_flow',
'enth_rise', 'real_flow', 'eff_poly_calc', 'blds_pwr'
] + bleed_names + ['W_passthru'])
# define the group level defaults
self.set_input_defaults('Fl_I:FAR', val=0., units=None)
self.set_input_defaults('PR', val=2., units=None)
self.set_input_defaults('eff', val=0.99, units=None)
# if not design:
# self.set_input_defaults('area', val=1, units='inch**2')
super().setup()
def setup(self):
thermo_data = self.options['thermo_data']
inflow_elements = self.options['inflow_elements']
air_fuel_elements = self.options['air_fuel_elements']
design = self.options['design']
statics = self.options['statics']
fuel_type = self.options['fuel_type']
air_fuel_thermo = Thermo(thermo_data, init_reacts=air_fuel_elements)
self.air_fuel_prods = air_fuel_thermo.products
air_thermo = Thermo(thermo_data, init_reacts=inflow_elements)
self.air_prods = air_thermo.products
self.num_air_fuel_prod = len(self.air_fuel_prods)
self.num_air_prod = len(self.air_prods)
# Create combustor flow station
in_flow = FlowIn(fl_name='Fl_I', num_prods=self.num_air_prod)
self.add_subsystem('in_flow',
in_flow,
promotes=['Fl_I:tot:*', 'Fl_I:stat:*'])
# Perform combustor engineering calculations
self.add_subsystem('mix_fuel',
MixFuel(thermo_data=thermo_data,
inflow_elements=inflow_elements,
fuel_type=fuel_type),
promotes=[
'Fl_I:stat:W', 'Fl_I:FAR', 'Fl_I:tot:n',
'Fl_I:tot:h', 'Wfuel', 'Wout'
])
# Pressure loss
prom_in = [('Pt_in', 'Fl_I:tot:P'), 'dPqP']
self.add_subsystem('p_loss', PressureLoss(), promotes_inputs=prom_in)
# Calculate vitiated flow station properties
vit_flow = SetTotal(thermo_data=thermo_data,
mode='h',
init_reacts=air_fuel_elements,
fl_name="Fl_O:tot")
self.add_subsystem('vitiated_flow',
vit_flow,
promotes_outputs=['Fl_O:*'])
self.connect("mix_fuel.mass_avg_h", "vitiated_flow.h")
self.connect("mix_fuel.init_prod_amounts",
"vitiated_flow.init_prod_amounts")
self.connect("p_loss.Pt_out", "vitiated_flow.P")
if statics:
if design:
# Calculate static properties.
out_stat = SetStatic(mode="MN",
thermo_data=thermo_data,
init_reacts=air_fuel_elements,
fl_name="Fl_O:stat")
prom_in = ['MN']
prom_out = ['Fl_O:stat:*']
self.add_subsystem('out_stat',
out_stat,
promotes_inputs=prom_in,
promotes_outputs=prom_out)
self.connect("mix_fuel.init_prod_amounts",
"out_stat.init_prod_amounts")
self.connect('Fl_O:tot:S', 'out_stat.S')
self.connect('Fl_O:tot:h', 'out_stat.ht')
self.connect('Fl_O:tot:P', 'out_stat.guess:Pt')
self.connect('Fl_O:tot:gamma', 'out_stat.guess:gamt')
self.connect('Wout', 'out_stat.W')
else:
# Calculate static properties.
out_stat = SetStatic(mode="area",
thermo_data=thermo_data,
init_reacts=air_fuel_elements,
fl_name="Fl_O:stat")
prom_in = ['area']
prom_out = ['Fl_O:stat:*']
self.add_subsystem('out_stat',
out_stat,
promotes_inputs=prom_in,
promotes_outputs=prom_out)
self.connect("mix_fuel.init_prod_amounts",
"out_stat.init_prod_amounts")
self.connect('Fl_O:tot:S', 'out_stat.S')
self.connect('Fl_O:tot:h', 'out_stat.ht')
self.connect('Fl_O:tot:P', 'out_stat.guess:Pt')
self.connect('Fl_O:tot:gamma', 'out_stat.guess:gamt')
self.connect('Wout', 'out_stat.W')
else:
self.add_subsystem('W_passthru',
PassThrough('Wout',
'Fl_O:stat:W',
1.0,
units="lbm/s"),
promotes=['*'])
self.add_subsystem('FAR_pass_thru',
PassThrough('Fl_I:FAR', 'Fl_O:FAR', 0.0),
promotes=['*'])
def setup(self):
thermo_data = self.options['thermo_data']
elements = self.options['elements']
bleed_elements = self.options['bleed_elements']
map_data = self.options['map_data']
designFlag = self.options['design']
bleeds = self.options['bleed_names']
statics = self.options['statics']
interp_method = self.options['map_interp_method']
map_extrap = self.options['map_extrap']
gas_thermo = species_data.Thermo(thermo_data, init_reacts=elements)
self.gas_prods = gas_thermo.products
self.num_prod = len(self.gas_prods)
bld_thermo = species_data.Thermo(thermo_data,
init_reacts=bleed_elements)
self.bld_prods = bld_thermo.products
self.num_bld_prod = len(self.bld_prods)
# Create inlet flow station
in_flow = FlowIn(fl_name='Fl_I', num_prods=self.num_prod)
self.add_subsystem('in_flow', in_flow, promotes_inputs=['Fl_I:*'])
self.add_subsystem('corrinputs',
CorrectedInputsCalc(),
promotes_inputs=[
'Nmech', ('W_in', 'Fl_I:stat:W'),
('Pt', 'Fl_I:tot:P'), ('Tt', 'Fl_I:tot:T')
],
promotes_outputs=['Np', 'Wp'])
turb_map = TurbineMap(map_data=map_data,
design=designFlag,
interp_method=interp_method,
extrap=map_extrap)
if designFlag:
self.add_subsystem(
'map',
turb_map,
promotes_inputs=['Np', 'Wp', 'PR', 'eff'],
promotes_outputs=['s_PR', 's_Wp', 's_eff', 's_Np'])
else:
self.add_subsystem(
'map',
turb_map,
promotes_inputs=['Np', 'Wp', 's_PR', 's_Wp', 's_eff', 's_Np'],
promotes_outputs=['PR', 'eff'])
# Calculate pressure drop across turbine
self.add_subsystem('press_drop',
PressureDrop(),
promotes_inputs=['PR', ('Pt_in', 'Fl_I:tot:P')])
# Calculate ideal flow station properties
self.add_subsystem('ideal_flow',
SetTotal(thermo_data=thermo_data,
mode='S',
init_reacts=elements),
promotes_inputs=[('S', 'Fl_I:tot:S'),
('init_prod_amounts', 'Fl_I:tot:n')
])
self.connect("press_drop.Pt_out", "ideal_flow.P")
# # Calculate enthalpy drop across turbine
# self.add_subsystem("enth_drop", EnthalpyDrop(), promotes=['eff'])
# self.connect("Fl_I:tot:h", "enth_drop.ht_in")
# self.connect("ideal_flow.h", "enth_drop.ht_out_ideal")
for BN in bleeds:
bld_flow = FlowIn(fl_name=BN, num_prods=self.num_bld_prod)
self.add_subsystem(BN,
bld_flow,
promotes_inputs=['{}:*'.format(BN)])
# Calculate bleed parameters
blds = Bleeds(bleed_names=bleeds, main_flow_elements=elements)
self.add_subsystem('blds',
blds,
promotes_inputs=[('W_in', 'Fl_I:stat:W'),
('Pt_in', 'Fl_I:tot:P'),
('n_in', 'Fl_I:tot:n')] +
['{}:frac_P'.format(BN) for BN in bleeds] +
[('{}:W'.format(BN), '{}:stat:W'.format(BN))
for BN in bleeds] +
[('{}:n'.format(BN), '{}:tot:n'.format(BN))
for BN in bleeds],
promotes_outputs=['W_out'])
self.connect('press_drop.Pt_out', 'blds.Pt_out')
bleed_names2 = []
for BN in bleeds:
# self.connect(BN+':stat:W','blds.{}:W'.format(BN))
# self.connect(BN+':tot:n','blds.{}:n'.format(BN))
# self.connect(BN+':stat:W','blds.%s:'%BN)
# Determine bleed inflow properties
bleed_names2.append(BN + '_inflow')
self.add_subsystem(BN + '_inflow',
SetTotal(thermo_data=thermo_data,
mode='h',
init_reacts=bleed_elements),
promotes_inputs=[('init_prod_amounts',
BN + ":tot:n"),
('h', BN + ':tot:h')])
self.connect('blds.' + BN + ':Pt', BN + "_inflow.P")
# Ideally expand bleeds to exit pressure
bleed_names2.append(BN + '_ideal')
self.add_subsystem(BN + '_ideal',
SetTotal(thermo_data=thermo_data,
mode='S',
init_reacts=bleed_elements),
promotes_inputs=[('init_prod_amounts',
BN + ":tot:n")])
self.connect(BN + "_inflow.flow:S", BN + "_ideal.S")
self.connect("press_drop.Pt_out", BN + "_ideal.P")
# Calculate shaft power and exit enthalpy with cooling flows production
self.add_subsystem('pwr_turb',
EnthalpyAndPower(bleed_names=bleeds),
promotes_inputs=[
'Nmech', 'eff', 'W_out',
('W_in', 'Fl_I:stat:W'), ('ht_in', 'Fl_I:tot:h')
] + [(BN + ':W', BN + ':stat:W') for BN in bleeds] +
[(BN + ':ht', BN + ':tot:h') for BN in bleeds] +
[(BN + ':ht_ideal', BN + '_ideal.h')
for BN in bleeds],
promotes_outputs=['power', 'trq', 'ht_out_b4bld'])
self.connect('ideal_flow.h', 'pwr_turb.ht_out_ideal')
# Calculate real flow station properties before bleed air is added
real_flow_b4bld = SetTotal(thermo_data=thermo_data,
mode='h',
init_reacts=elements,
fl_name="Fl_O_b4bld:tot")
self.add_subsystem('real_flow_b4bld',
real_flow_b4bld,
promotes_inputs=[('init_prod_amounts', 'Fl_I:tot:n')
])
self.connect('ht_out_b4bld', 'real_flow_b4bld.h')
self.connect('press_drop.Pt_out', 'real_flow_b4bld.P')
# Calculate Polytropic efficiency
self.add_subsystem('eff_poly_calc',
eff_poly_calc(),
promotes_inputs=[
'PR', ('S_in', 'Fl_I:tot:S'),
('Rt', 'Fl_I:tot:R')
],
promotes_outputs=['eff_poly'])
self.connect('real_flow_b4bld.Fl_O_b4bld:tot:S', 'eff_poly_calc.S_out')
# Calculate real flow station properties
real_flow = SetTotal(thermo_data=thermo_data,
mode='h',
init_reacts=elements,
fl_name="Fl_O:tot")
self.add_subsystem('real_flow',
real_flow,
promotes_outputs=['Fl_O:tot:*'])
self.connect("pwr_turb.ht_out", "real_flow.h")
self.connect("press_drop.Pt_out", "real_flow.P")
self.connect("blds.n_out", "real_flow.init_prod_amounts")
self.add_subsystem('FAR_passthru',
PassThrough('Fl_I:FAR', 'Fl_O:FAR', 0.0),
promotes=['*'])
# Calculate static properties
if statics:
if designFlag:
# SetStaticMN
out_stat = SetStatic(mode='MN',
thermo_data=thermo_data,
init_reacts=elements,
fl_name="Fl_O:stat")
self.add_subsystem('out_stat',
out_stat,
promotes_inputs=['MN'],
promotes_outputs=['Fl_O:stat:*'])
self.connect('blds.n_out', 'out_stat.init_prod_amounts')
self.connect('Fl_O:tot:S', 'out_stat.S')
self.connect('Fl_O:tot:h', 'out_stat.ht')
self.connect('W_out', 'out_stat.W')
self.connect('Fl_O:tot:P', 'out_stat.guess:Pt')
self.connect('Fl_O:tot:gamma', 'out_stat.guess:gamt')
else:
# SetStaticArea
out_stat = SetStatic(mode='area',
thermo_data=thermo_data,
init_reacts=elements,
fl_name="Fl_O:stat")
self.add_subsystem('out_stat',
out_stat,
promotes_inputs=['area'],
promotes_outputs=['Fl_O:stat:*'])
self.connect('blds.n_out', 'out_stat.init_prod_amounts')
self.connect('Fl_O:tot:S', 'out_stat.S')
self.connect('Fl_O:tot:h', 'out_stat.ht')
self.connect('W_out', 'out_stat.W')
self.connect('Fl_O:tot:P', 'out_stat.guess:Pt')
self.connect('Fl_O:tot:gamma', 'out_stat.guess:gamt')
self.set_order(
['in_flow', 'corrinputs', 'map', 'press_drop', 'ideal_flow'] +
bleeds + ['blds'] + bleed_names2 + [
'pwr_turb', 'real_flow_b4bld', 'eff_poly_calc',
'real_flow', 'FAR_passthru', 'out_stat'
])
else:
self.add_subsystem('W_passthru',
PassThrough('W_out',
'Fl_O:stat:W',
1.0,
units="lbm/s"),
promotes=['*'])
self.set_order(
['in_flow', 'corrinputs', 'map', 'press_drop', 'ideal_flow'] +
bleeds + ['blds'] + bleed_names2 + [
'pwr_turb', 'real_flow_b4bld', 'eff_poly_calc',
'real_flow', 'FAR_passthru', 'W_passthru'
])
def setup(self):
thermo_data = self.options['thermo_data']
elements = self.options['elements']
statics = self.options['statics']
design = self.options['design']
bleeds = self.options['bleed_names']
num_element = len(elements)
# Create inlet flowstation
flow_in = FlowIn(fl_name='Fl_I')
self.add_subsystem('flow_in',
flow_in,
promotes=['Fl_I:tot:*', 'Fl_I:stat:*'])
# Bleed flow calculations
blds = BleedCalcs(bleed_names=bleeds)
bld_port_globs = ['{}:*'.format(bn) for bn in bleeds]
self.add_subsystem('bld_calcs',
blds,
promotes_inputs=[('W_in', 'Fl_I:stat:W'),
'*:frac_W'],
promotes_outputs=['W_out'] + bld_port_globs)
bleed_names = []
for BN in bleeds:
bleed_names.append(BN + '_flow')
bleed_flow = Thermo(mode='total_TP',
fl_name=BN + ":tot",
method='CEA',
thermo_kwargs={
'elements': elements,
'spec': thermo_data
})
self.add_subsystem(BN + '_flow',
bleed_flow,
promotes_inputs=[('composition',
'Fl_I:tot:composition'),
('T', 'Fl_I:tot:T'),
('P', 'Fl_I:tot:P')],
promotes_outputs=['{}:tot:*'.format(BN)])
# Total Calc
real_flow = Thermo(mode='total_TP',
fl_name="Fl_O:tot",
method='CEA',
thermo_kwargs={
'elements': elements,
'spec': thermo_data
})
prom_in = [('composition', 'Fl_I:tot:composition'),
('T', 'Fl_I:tot:T'), ('P', 'Fl_I:tot:P')]
self.add_subsystem('real_flow',
real_flow,
promotes_inputs=prom_in,
promotes_outputs=['Fl_O:*'])
if statics:
if design:
# Calculate static properties
out_stat = Thermo(mode='static_MN',
fl_name="Fl_O:stat",
method='CEA',
thermo_kwargs={
'elements': elements,
'spec': thermo_data
})
prom_in = [('composition', 'Fl_I:tot:composition'), 'MN']
prom_out = ['Fl_O:stat:*']
self.add_subsystem('out_stat',
out_stat,
promotes_inputs=prom_in,
promotes_outputs=prom_out)
self.connect('Fl_O:tot:S', 'out_stat.S')
self.connect('Fl_O:tot:h', 'out_stat.ht')
self.connect('Fl_O:tot:P', 'out_stat.guess:Pt')
self.connect('Fl_O:tot:gamma', 'out_stat.guess:gamt')
self.connect('W_out', 'out_stat.W')
else:
# Calculate static properties
out_stat = Thermo(mode='static_A',
fl_name="Fl_O:stat",
method='CEA',
thermo_kwargs={
'elements': elements,
'spec': thermo_data
})
prom_in = [('composition', 'Fl_I:tot:composition'), 'area']
prom_out = ['Fl_O:stat:*']
self.add_subsystem('out_stat',
out_stat,
promotes_inputs=prom_in,
promotes_outputs=prom_out)
self.connect('Fl_O:tot:S', 'out_stat.S')
self.connect('Fl_O:tot:h', 'out_stat.ht')
self.connect('Fl_O:tot:P', 'out_stat.guess:Pt')
self.connect('Fl_O:tot:gamma', 'out_stat.guess:gamt')
self.connect('W_out', 'out_stat.W')
else:
self.add_subsystem('W_passthru',
PassThrough('W_out',
'Fl_O:stat:W',
1.0,
units="lbm/s"),
promotes=['*'])
def setup(self):
thermo_method = self.options['thermo_method']
thermo_data = self.options['thermo_data']
inflow_composition = self.Fl_I_data['Fl_I']
air_fuel_composition = self.Fl_O_data['Fl_O']
design = self.options['design']
statics = self.options['statics']
# Create combustor flow station
in_flow = FlowIn(fl_name='Fl_I')
self.add_subsystem('in_flow',
in_flow,
promotes=['Fl_I:tot:*', 'Fl_I:stat:*'])
self.add_subsystem('mix_fuel',
self.thermo_add_comp,
promotes=[
'Fl_I:stat:W', ('mix:ratio', 'Fl_I:FAR'),
'Fl_I:tot:composition', 'Fl_I:tot:h',
('mix:W', 'Wfuel'), 'Wout'
])
# Pressure loss
prom_in = [('Pt_in', 'Fl_I:tot:P'), 'dPqP']
self.add_subsystem('p_loss', PressureLoss(), promotes_inputs=prom_in)
# Calculate vitiated flow station properties
vit_flow = Thermo(mode='total_hP',
fl_name='Fl_O:tot',
method=thermo_method,
thermo_kwargs={
'composition': air_fuel_composition,
'spec': thermo_data
})
self.add_subsystem('vitiated_flow',
vit_flow,
promotes_outputs=['Fl_O:*'])
self.connect("mix_fuel.mass_avg_h", "vitiated_flow.h")
self.connect("mix_fuel.composition_out", "vitiated_flow.composition")
self.connect("p_loss.Pt_out", "vitiated_flow.P")
if statics:
if design:
# Calculate static properties.
out_stat = Thermo(mode='static_MN',
fl_name='Fl_O:stat',
method=thermo_method,
thermo_kwargs={
'composition': air_fuel_composition,
'spec': thermo_data
})
prom_in = ['MN']
prom_out = ['Fl_O:stat:*']
self.add_subsystem('out_stat',
out_stat,
promotes_inputs=prom_in,
promotes_outputs=prom_out)
self.connect("mix_fuel.composition_out",
"out_stat.composition")
self.connect('Fl_O:tot:S', 'out_stat.S')
self.connect('Fl_O:tot:h', 'out_stat.ht')
self.connect('Fl_O:tot:P', 'out_stat.guess:Pt')
self.connect('Fl_O:tot:gamma', 'out_stat.guess:gamt')
self.connect('Wout', 'out_stat.W')
else:
# Calculate static properties.
out_stat = Thermo(mode='static_A',
fl_name='Fl_O:stat',
method=thermo_method,
thermo_kwargs={
'composition': air_fuel_composition,
'spec': thermo_data
})
prom_in = ['area']
prom_out = ['Fl_O:stat:*']
self.add_subsystem('out_stat',
out_stat,
promotes_inputs=prom_in,
promotes_outputs=prom_out)
self.connect("mix_fuel.composition_out",
"out_stat.composition")
self.connect('Fl_O:tot:S', 'out_stat.S')
self.connect('Fl_O:tot:h', 'out_stat.ht')
self.connect('Fl_O:tot:P', 'out_stat.guess:Pt')
self.connect('Fl_O:tot:gamma', 'out_stat.guess:gamt')
self.connect('Wout', 'out_stat.W')
else:
self.add_subsystem('W_passthru',
PassThrough('Wout',
'Fl_O:stat:W',
1.0,
units="lbm/s"),
promotes=['*'])
super().setup()
def setup(self):
thermo_method = self.options['thermo_method']
thermo_data = self.options['thermo_data']
elements = self.options['elements']
bleed_elements = self.options['bleed_elements']
map_data = self.options['map_data']
designFlag = self.options['design']
bleeds = self.options['bleed_names']
statics = self.options['statics']
interp_method = self.options['map_interp_method']
map_extrap = self.options['map_extrap']
num_element = len(elements)
num_bld_element = len(bleed_elements)
# Create inlet flow station
in_flow = FlowIn(fl_name='Fl_I')
self.add_subsystem('in_flow', in_flow, promotes_inputs=['Fl_I:*'])
self.add_subsystem('corrinputs',
CorrectedInputsCalc(),
promotes_inputs=[
'Nmech', ('W_in', 'Fl_I:stat:W'),
('Pt', 'Fl_I:tot:P'), ('Tt', 'Fl_I:tot:T')
],
promotes_outputs=['Np', 'Wp'])
turb_map = TurbineMap(map_data=map_data,
design=designFlag,
interp_method=interp_method,
extrap=map_extrap)
if designFlag:
self.add_subsystem(
'map',
turb_map,
promotes_inputs=['Np', 'Wp', 'PR', 'eff'],
promotes_outputs=['s_PR', 's_Wp', 's_eff', 's_Np'])
else:
self.add_subsystem(
'map',
turb_map,
promotes_inputs=['Np', 'Wp', 's_PR', 's_Wp', 's_eff', 's_Np'],
promotes_outputs=['PR', 'eff'])
# Calculate pressure drop across turbine
self.add_subsystem('press_drop',
PressureDrop(),
promotes_inputs=['PR', ('Pt_in', 'Fl_I:tot:P')])
# Calculate ideal flow station properties
ideal_flow = Thermo(mode='total_SP',
method=thermo_method,
thermo_kwargs={
'elements': elements,
'spec': thermo_data
})
self.add_subsystem('ideal_flow',
ideal_flow,
promotes_inputs=[('S', 'Fl_I:tot:S'),
('composition',
'Fl_I:tot:composition')])
self.connect("press_drop.Pt_out", "ideal_flow.P")
# # Calculate enthalpy drop across turbine
# self.add_subsystem("enth_drop", EnthalpyDrop(), promotes=['eff'])
# self.connect("Fl_I:tot:h", "enth_drop.ht_in")
# self.connect("ideal_flow.h", "enth_drop.ht_out_ideal")
for BN in bleeds:
bld_flow = FlowIn(fl_name=BN)
self.add_subsystem(BN, bld_flow, promotes_inputs=[f'{BN}:*'])
# # Calculate bleed parameters
blds = BleedPressure(bleed_names=bleeds)
self.add_subsystem('blds',
blds,
promotes_inputs=[
('Pt_in', 'Fl_I:tot:P'),
] + [f'{BN}:frac_P' for BN in bleeds])
self.connect('press_drop.Pt_out', 'blds.Pt_out')
bleed_element_list = [bleed_elements for name in bleeds]
bld_mix = ThermoAdd(mix_thermo_data=thermo_data,
inflow_elements=elements,
mix_elements=bleed_element_list,
mix_names=bleeds,
mix_mode='flow')
self.add_subsystem(
'bld_mix',
bld_mix,
promotes_inputs=['Fl_I:stat:W', 'Fl_I:tot:composition'] +
[(f'{BN}:W', f'{BN}:stat:W') for BN in bleeds] +
[(f'{BN}:composition', f'{BN}:tot:composition') for BN in bleeds],
promotes_outputs=[('Wout', 'W_out')])
bleed_names2 = []
for BN in bleeds:
# Determine bleed inflow properties
bleed_names2.append(BN + '_inflow')
inflow = Thermo(mode='total_hP',
method=thermo_method,
thermo_kwargs={
'elements': bleed_elements,
'spec': thermo_data
})
self.add_subsystem(BN + '_inflow',
inflow,
promotes_inputs=[('composition',
BN + ":tot:composition"),
('h', BN + ':tot:h')])
self.connect(f'blds.{BN}:Pt', f'{BN}_inflow.P')
# Ideally expand bleeds to exit pressure
bleed_names2.append(f'{BN}_ideal')
ideal = Thermo(mode='total_SP',
method=thermo_method,
thermo_kwargs={
'elements': bleed_elements,
'spec': thermo_data
})
self.add_subsystem(f'{BN}_ideal',
ideal,
promotes_inputs=[('composition',
BN + ":tot:composition")])
self.connect(f"{BN}_inflow.flow:S", f"{BN}_ideal.S")
self.connect("press_drop.Pt_out", f"{BN}_ideal.P")
# Calculate shaft power and exit enthalpy with cooling flows production
self.add_subsystem('pwr_turb',
EnthalpyAndPower(bleed_names=bleeds),
promotes_inputs=[
'Nmech', 'eff', 'W_out',
('W_in', 'Fl_I:stat:W'), ('ht_in', 'Fl_I:tot:h')
] + [(BN + ':W', BN + ':stat:W') for BN in bleeds] +
[(BN + ':ht', BN + ':tot:h') for BN in bleeds] +
[(BN + ':ht_ideal', BN + '_ideal.h')
for BN in bleeds],
promotes_outputs=['power', 'trq', 'ht_out_b4bld'])
self.connect('ideal_flow.h', 'pwr_turb.ht_out_ideal')
# Calculate real flow station properties before bleed air is added
real_flow_b4bld = Thermo(mode='total_hP',
fl_name="Fl_O_b4bld:tot",
method=thermo_method,
thermo_kwargs={
'elements': elements,
'spec': thermo_data
})
self.add_subsystem('real_flow_b4bld',
real_flow_b4bld,
promotes_inputs=[('composition',
'Fl_I:tot:composition')])
self.connect('ht_out_b4bld', 'real_flow_b4bld.h')
self.connect('press_drop.Pt_out', 'real_flow_b4bld.P')
# Calculate Polytropic efficiency
self.add_subsystem('eff_poly_calc',
eff_poly_calc(),
promotes_inputs=[
'PR', ('S_in', 'Fl_I:tot:S'),
('Rt', 'Fl_I:tot:R')
],
promotes_outputs=['eff_poly'])
self.connect('real_flow_b4bld.Fl_O_b4bld:tot:S', 'eff_poly_calc.S_out')
# Calculate real flow station properties
real_flow = Thermo(mode='total_hP',
fl_name="Fl_O:tot",
method=thermo_method,
thermo_kwargs={
'elements': elements,
'spec': thermo_data
})
self.add_subsystem('real_flow',
real_flow,
promotes_outputs=['Fl_O:tot:*'])
self.connect("pwr_turb.ht_out", "real_flow.h")
self.connect("press_drop.Pt_out", "real_flow.P")
self.connect("bld_mix.composition_out", "real_flow.composition")
# Calculate static properties
if statics:
if designFlag:
# SetStaticMN
out_stat = Thermo(mode='static_MN',
fl_name="Fl_O:stat",
method=thermo_method,
thermo_kwargs={
'elements': elements,
'spec': thermo_data
})
self.add_subsystem('out_stat',
out_stat,
promotes_inputs=['MN'],
promotes_outputs=['Fl_O:stat:*'])
self.connect('bld_mix.composition_out', 'out_stat.composition')
self.connect('Fl_O:tot:S', 'out_stat.S')
self.connect('Fl_O:tot:h', 'out_stat.ht')
self.connect('W_out', 'out_stat.W')
self.connect('Fl_O:tot:P', 'out_stat.guess:Pt')
self.connect('Fl_O:tot:gamma', 'out_stat.guess:gamt')
else:
# SetStaticArea
out_stat = Thermo(mode='static_A',
fl_name="Fl_O:stat",
method=thermo_method,
thermo_kwargs={
'elements': elements,
'spec': thermo_data
})
self.add_subsystem('out_stat',
out_stat,
promotes_inputs=['area'],
promotes_outputs=['Fl_O:stat:*'])
self.connect('bld_mix.composition_out', 'out_stat.composition')
self.connect('Fl_O:tot:S', 'out_stat.S')
self.connect('Fl_O:tot:h', 'out_stat.ht')
self.connect('W_out', 'out_stat.W')
self.connect('Fl_O:tot:P', 'out_stat.guess:Pt')
self.connect('Fl_O:tot:gamma', 'out_stat.guess:gamt')
self.set_order(
['in_flow', 'corrinputs', 'map', 'press_drop', 'ideal_flow'] +
bleeds + ['bld_mix', 'blds'] + bleed_names2 + [
'pwr_turb', 'real_flow_b4bld', 'eff_poly_calc',
'real_flow', 'out_stat'
])
else:
self.add_subsystem('W_passthru',
PassThrough('W_out',
'Fl_O:stat:W',
1.0,
units="lbm/s"),
promotes=['*'])
self.set_order(
['in_flow', 'corrinputs', 'map', 'press_drop', 'ideal_flow'] +
bleeds + ['bld_mix', 'blds'] + bleed_names2 + [
'pwr_turb', 'real_flow_b4bld', 'eff_poly_calc',
'real_flow', 'W_passthru'
])
self.set_input_defaults('eff', val=0.99, units=None)
def setup(self):
thermo_data = self.options['thermo_data']
elements = self.options['elements']
statics = self.options['statics']
design = self.options['design']
expMN = self.options['expMN']
gas_thermo = species_data.Thermo(thermo_data, init_reacts=elements)
gas_prods = gas_thermo.products
num_prod = len(gas_prods)
# Create inlet flowstation
flow_in = FlowIn(fl_name='Fl_I', num_prods=num_prod)
self.add_subsystem('flow_in',
flow_in,
promotes=['Fl_I:tot:*', 'Fl_I:stat:*'])
if expMN > 1e-10: # Calcluate pressure losses as function of Mach number
if design:
self.add_subsystem(
'dPqP_MN',
MachPressureLossMap(design=design, expMN=expMN),
promotes_inputs=['dPqP', ('MN_in', 'Fl_I:stat:MN')],
promotes_outputs=['s_dPqP'])
else:
self.add_subsystem(
'dPqP_MN',
MachPressureLossMap(design=design, expMN=expMN),
promotes_inputs=['s_dPqP', ('MN_in', 'Fl_I:stat:MN')],
promotes_outputs=['dPqP'])
#Pressure Loss Component
prom_in = [('Pt_in', 'Fl_I:tot:P'), 'dPqP']
self.add_subsystem('p_loss', PressureLoss(), promotes_inputs=prom_in)
# Energy Calc Component
prom_in = [('W_in', 'Fl_I:stat:W'), ('ht_in', 'Fl_I:tot:h'), 'Q_dot']
self.add_subsystem('q_calc', qCalc(), promotes_inputs=prom_in)
# Total Calc
real_flow = SetTotal(thermo_data=thermo_data,
mode='h',
init_reacts=elements,
fl_name="Fl_O:tot")
prom_in = [('init_prod_amounts', 'Fl_I:tot:n')]
self.add_subsystem('real_flow',
real_flow,
promotes_inputs=prom_in,
promotes_outputs=['Fl_O:*'])
self.connect("q_calc.ht_out", "real_flow.h")
self.connect("p_loss.Pt_out", "real_flow.P")
if statics:
if design:
# Calculate static properties
out_stat = SetStatic(mode="MN",
thermo_data=thermo_data,
init_reacts=elements,
fl_name="Fl_O:stat")
prom_in = [('init_prod_amounts', 'Fl_I:tot:n'),
('W', 'Fl_I:stat:W'), 'MN']
prom_out = ['Fl_O:stat:*']
self.add_subsystem('out_stat',
out_stat,
promotes_inputs=prom_in,
promotes_outputs=prom_out)
self.connect('Fl_O:tot:S', 'out_stat.S')
self.connect('Fl_O:tot:h', 'out_stat.ht')
self.connect('Fl_O:tot:P', 'out_stat.guess:Pt')
self.connect('Fl_O:tot:gamma', 'out_stat.guess:gamt')
else:
# Calculate static properties
out_stat = SetStatic(mode="area",
thermo_data=thermo_data,
init_reacts=elements,
fl_name="Fl_O:stat")
prom_in = [('init_prod_amounts', 'Fl_I:tot:n'),
('W', 'Fl_I:stat:W'), 'area']
prom_out = ['Fl_O:stat:*']
self.add_subsystem('out_stat',
out_stat,
promotes_inputs=prom_in,
promotes_outputs=prom_out)
self.connect('Fl_O:tot:S', 'out_stat.S')
self.connect('Fl_O:tot:h', 'out_stat.ht')
self.connect('Fl_O:tot:P', 'out_stat.guess:Pt')
self.connect('Fl_O:tot:gamma', 'out_stat.guess:gamt')
else:
self.add_subsystem('W_passthru',
PassThrough('Fl_I:stat:W',
'Fl_O:stat:W',
1.0,
units="lbm/s"),
promotes=['*'])
self.add_subsystem('FAR_passthru',
PassThrough('Fl_I:FAR', 'Fl_O:FAR', 0.0),
promotes=['*'])
def setup(self):
thermo_method = self.options['thermo_method']
thermo_data = self.options['thermo_data']
if self.options['inflow_thermo_data'] is not None:
# Set the inflow thermodynamic data package if it is different from the outflow one
inflow_thermo_data = self.options['inflow_thermo_data']
else:
# Set the inflow thermodynamic data package if it is the same as the outflow one
inflow_thermo_data = thermo_data
inflow_elements = self.options['inflow_elements']
air_fuel_elements = self.options['air_fuel_elements']
design = self.options['design']
statics = self.options['statics']
fuel_type = self.options['fuel_type']
num_air_element = len(inflow_elements)
# Create combustor flow station
in_flow = FlowIn(fl_name='Fl_I')
self.add_subsystem('in_flow',
in_flow,
promotes=['Fl_I:tot:*', 'Fl_I:stat:*'])
# Perform combustor engineering calculations
self.add_subsystem('mix_fuel',
ThermoAdd(inflow_thermo_data=inflow_thermo_data,
mix_thermo_data=thermo_data,
inflow_elements=inflow_elements,
mix_elements=fuel_type),
promotes=[
'Fl_I:stat:W', ('mix:ratio', 'Fl_I:FAR'),
'Fl_I:tot:composition', 'Fl_I:tot:h',
('mix:W', 'Wfuel'), 'Wout'
])
# Pressure loss
prom_in = [('Pt_in', 'Fl_I:tot:P'), 'dPqP']
self.add_subsystem('p_loss', PressureLoss(), promotes_inputs=prom_in)
# Calculate vitiated flow station properties
vit_flow = Thermo(mode='total_hP',
fl_name='Fl_O:tot',
method=thermo_method,
thermo_kwargs={
'elements': air_fuel_elements,
'spec': thermo_data
})
self.add_subsystem('vitiated_flow',
vit_flow,
promotes_outputs=['Fl_O:*'])
self.connect("mix_fuel.mass_avg_h", "vitiated_flow.h")
self.connect("mix_fuel.composition_out", "vitiated_flow.composition")
self.connect("p_loss.Pt_out", "vitiated_flow.P")
if statics:
if design:
# Calculate static properties.
out_stat = Thermo(mode='static_MN',
fl_name='Fl_O:stat',
method=thermo_method,
thermo_kwargs={
'elements': air_fuel_elements,
'spec': thermo_data
})
prom_in = ['MN']
prom_out = ['Fl_O:stat:*']
self.add_subsystem('out_stat',
out_stat,
promotes_inputs=prom_in,
promotes_outputs=prom_out)
self.connect("mix_fuel.composition_out",
"out_stat.composition")
self.connect('Fl_O:tot:S', 'out_stat.S')
self.connect('Fl_O:tot:h', 'out_stat.ht')
self.connect('Fl_O:tot:P', 'out_stat.guess:Pt')
self.connect('Fl_O:tot:gamma', 'out_stat.guess:gamt')
self.connect('Wout', 'out_stat.W')
else:
# Calculate static properties.
out_stat = Thermo(mode='static_A',
fl_name='Fl_O:stat',
method=thermo_method,
thermo_kwargs={
'elements': air_fuel_elements,
'spec': thermo_data
})
prom_in = ['area']
prom_out = ['Fl_O:stat:*']
self.add_subsystem('out_stat',
out_stat,
promotes_inputs=prom_in,
promotes_outputs=prom_out)
self.connect("mix_fuel.composition_out",
"out_stat.composition")
self.connect('Fl_O:tot:S', 'out_stat.S')
self.connect('Fl_O:tot:h', 'out_stat.ht')
self.connect('Fl_O:tot:P', 'out_stat.guess:Pt')
self.connect('Fl_O:tot:gamma', 'out_stat.guess:gamt')
self.connect('Wout', 'out_stat.W')
else:
self.add_subsystem('W_passthru',
PassThrough('Wout',
'Fl_O:stat:W',
1.0,
units="lbm/s"),
promotes=['*'])
def setup(self):
thermo_method = self.options['thermo_method']
thermo_data = self.options['thermo_data']
statics = self.options['statics']
design = self.options['design']
composition = self.Fl_I_data['Fl_I']
# Create inlet flowstation
flow_in = FlowIn(fl_name='Fl_I')
self.add_subsystem('flow_in', flow_in, promotes_inputs=('Fl_I:*', ))
# Split the flows
self.add_subsystem('split_calc',
BPRcalc(),
promotes_inputs=('BPR', ('W_in', 'Fl_I:stat:W')))
# Set Fl_out1 totals based on T, P
real_flow1 = Thermo(mode='total_TP',
fl_name='Fl_O1:tot',
method=thermo_method,
thermo_kwargs={
'composition': composition,
'spec': thermo_data
})
self.add_subsystem('real_flow1',
real_flow1,
promotes_inputs=(('composition',
'Fl_I:tot:composition'),
('P', 'Fl_I:tot:P'),
('T', 'Fl_I:tot:T')),
promotes_outputs=('Fl_O1:tot:*', ))
# Set Fl_out2 totals based on T, P
real_flow2 = Thermo(mode='total_TP',
fl_name='Fl_O2:tot',
method=thermo_method,
thermo_kwargs={
'composition': composition,
'spec': thermo_data
})
self.add_subsystem('real_flow2',
real_flow2,
promotes_inputs=(('composition',
'Fl_I:tot:composition'),
('P', 'Fl_I:tot:P'),
('T', 'Fl_I:tot:T')),
promotes_outputs=('Fl_O2:tot:*', ))
if statics:
if design:
# Calculate static properties
out1_stat = Thermo(mode='static_MN',
fl_name='Fl_O1:stat',
method=thermo_method,
thermo_kwargs={
'composition': composition,
'spec': thermo_data
})
prom_in = [('composition', 'Fl_I:tot:composition'),
('MN', 'MN1')]
prom_out = ['Fl_O1:stat:*']
self.add_subsystem('out1_stat',
out1_stat,
promotes_inputs=prom_in,
promotes_outputs=prom_out)
self.connect('Fl_O1:tot:S', 'out1_stat.S')
self.connect('Fl_O1:tot:h', 'out1_stat.ht')
self.connect('Fl_O1:tot:P', 'out1_stat.guess:Pt')
self.connect('Fl_O1:tot:gamma', 'out1_stat.guess:gamt')
self.connect('split_calc.W1', 'out1_stat.W')
out2_stat = Thermo(mode='static_MN',
fl_name='Fl_O2:stat',
method=thermo_method,
thermo_kwargs={
'composition': composition,
'spec': thermo_data
})
prom_in = [('composition', 'Fl_I:tot:composition'),
('MN', 'MN2')]
prom_out = ['Fl_O2:stat:*']
self.add_subsystem('out2_stat',
out2_stat,
promotes_inputs=prom_in,
promotes_outputs=prom_out)
self.connect('Fl_O2:tot:S', 'out2_stat.S')
self.connect('Fl_O2:tot:h', 'out2_stat.ht')
self.connect('Fl_O2:tot:P', 'out2_stat.guess:Pt')
self.connect('Fl_O2:tot:gamma', 'out2_stat.guess:gamt')
self.connect('split_calc.W2', 'out2_stat.W')
else:
# Calculate static properties
out1_stat = Thermo(mode='static_A',
fl_name='Fl_O1:stat',
method=thermo_method,
thermo_kwargs={
'composition': composition,
'spec': thermo_data
})
prom_in = [('composition', 'Fl_I:tot:composition'),
('area', 'area1')]
prom_out = ['Fl_O1:stat:*']
self.add_subsystem('out1_stat',
out1_stat,
promotes_inputs=prom_in,
promotes_outputs=prom_out)
self.connect('Fl_O1:tot:S', 'out1_stat.S')
self.connect('Fl_O1:tot:h', 'out1_stat.ht')
self.connect('Fl_O1:tot:P', 'out1_stat.guess:Pt')
self.connect('Fl_O1:tot:gamma', 'out1_stat.guess:gamt')
self.connect('split_calc.W1', 'out1_stat.W')
out2_stat = Thermo(mode='static_A',
fl_name='Fl_O2:stat',
method=thermo_method,
thermo_kwargs={
'composition': composition,
'spec': thermo_data
})
prom_in = [('composition', 'Fl_I:tot:composition'),
('area', 'area2')]
prom_out = ['Fl_O2:stat:*']
self.add_subsystem('out2_stat',
out2_stat,
promotes_inputs=prom_in,
promotes_outputs=prom_out)
self.connect('Fl_O2:tot:S', 'out2_stat.S')
self.connect('Fl_O2:tot:h', 'out2_stat.ht')
self.connect('Fl_O2:tot:P', 'out2_stat.guess:Pt')
self.connect('Fl_O2:tot:gamma', 'out2_stat.guess:gamt')
self.connect('split_calc.W2', 'out2_stat.W')
else:
self.add_subsystem('W1_passthru',
PassThrough('split_calc_W1',
'Fl_O1:stat:W',
1.0,
units="lbm/s"),
promotes=['*'])
self.add_subsystem('W2_passthru',
PassThrough('split_calc_W2',
'Fl_O2:stat:W',
1.0,
units="lbm/s"),
promotes=['*'])
self.connect('split_calc.W1', 'split_calc_W1')
self.connect('split_calc.W2', 'split_calc_W2')
super().setup()
def setup(self):
thermo_method = self.options['thermo_method']
thermo_data = self.options['thermo_data']
elements = self.options['elements']
statics = self.options['statics']
design = self.options['design']
expMN = self.options['expMN']
num_element = len(elements)
# Create inlet flowstation
flow_in = FlowIn(fl_name='Fl_I')
self.add_subsystem('flow_in',
flow_in,
promotes=['Fl_I:tot:*', 'Fl_I:stat:*'])
if expMN > 1e-10: # Calcluate pressure losses as function of Mach number
if design:
self.add_subsystem(
'dPqP_MN',
MachPressureLossMap(design=design, expMN=expMN),
promotes_inputs=['dPqP', ('MN_in', 'Fl_I:stat:MN')],
promotes_outputs=['s_dPqP'])
else:
self.add_subsystem(
'dPqP_MN',
MachPressureLossMap(design=design, expMN=expMN),
promotes_inputs=['s_dPqP', ('MN_in', 'Fl_I:stat:MN')],
promotes_outputs=['dPqP'])
#Pressure Loss Component
prom_in = [('Pt_in', 'Fl_I:tot:P'), 'dPqP']
self.add_subsystem('p_loss', PressureLoss(), promotes_inputs=prom_in)
# Energy Calc Component
prom_in = [('W_in', 'Fl_I:stat:W'), ('ht_in', 'Fl_I:tot:h'), 'Q_dot']
self.add_subsystem('q_calc', qCalc(), promotes_inputs=prom_in)
# Total Calc
real_flow = Thermo(mode='total_hP',
fl_name='Fl_O:tot',
method=thermo_method,
thermo_kwargs={
'elements': elements,
'spec': thermo_data
})
prom_in = [('composition', 'Fl_I:tot:composition')]
self.add_subsystem('real_flow',
real_flow,
promotes_inputs=prom_in,
promotes_outputs=['Fl_O:*'])
self.connect("q_calc.ht_out", "real_flow.h")
self.connect("p_loss.Pt_out", "real_flow.P")
if statics:
if design:
# Calculate static properties
out_stat = Thermo(mode='static_MN',
fl_name='Fl_O:stat',
method=thermo_method,
thermo_kwargs={
'elements': elements,
'spec': thermo_data
})
prom_in = [('composition', 'Fl_I:tot:composition'),
('W', 'Fl_I:stat:W'), 'MN']
prom_out = ['Fl_O:stat:*']
self.add_subsystem('out_stat',
out_stat,
promotes_inputs=prom_in,
promotes_outputs=prom_out)
self.connect('Fl_O:tot:S', 'out_stat.S')
self.connect('Fl_O:tot:h', 'out_stat.ht')
self.connect('Fl_O:tot:P', 'out_stat.guess:Pt')
self.connect('Fl_O:tot:gamma', 'out_stat.guess:gamt')
else:
# Calculate static properties
out_stat = Thermo(mode='static_A',
fl_name='Fl_O:stat',
method=thermo_method,
thermo_kwargs={
'elements': elements,
'spec': thermo_data
})
prom_in = [('composition', 'Fl_I:tot:composition'),
('W', 'Fl_I:stat:W'), 'area']
prom_out = ['Fl_O:stat:*']
self.add_subsystem('out_stat',
out_stat,
promotes_inputs=prom_in,
promotes_outputs=prom_out)
self.connect('Fl_O:tot:S', 'out_stat.S')
self.connect('Fl_O:tot:h', 'out_stat.ht')
self.connect('Fl_O:tot:P', 'out_stat.guess:Pt')
self.connect('Fl_O:tot:gamma', 'out_stat.guess:gamt')
else:
self.add_subsystem('W_passthru',
PassThrough('Fl_I:stat:W',
'Fl_O:stat:W',
1.0,
units="lbm/s"),
promotes=['*'])