def __init__(self, output):
""" Initialize a new instance of the logger
:param output: The output file to save to
"""
self.output = output
self.context = ModbusSlaveContext(
di = ModbusSequentialDataBlock.create(),
co = ModbusSequentialDataBlock.create(),
hr = ModbusSequentialDataBlock.create(),
ir = ModbusSequentialDataBlock.create())
def __init__(self, output):
""" Initialize a new instance of the logger
:param output: The output file to save to
"""
self.output = output
self.context = ModbusSlaveContext(
di=ModbusSequentialDataBlock.create(),
co=ModbusSequentialDataBlock.create(),
hr=ModbusSequentialDataBlock.create(),
ir=ModbusSequentialDataBlock.create())
def run_updating_server():
store = ModbusSlaveContext(hr=ModbusSequentialDataBlock.create())
context = ModbusServerContext(slaves=store, single=True)
loop = LoopingCall(f=updating_writer, a=(context, ))
loop.start(1, now=True) # initially delay by time
StartSerialServer(context,
framer=ModbusRtuFramer,
port='/dev/ttyACM0',
timeout=0.3,
baudrate=9600)
def test_combo(self):
test_store = ModbusSlaveContext(t=ModbusSequentialDataBlock.create())
test_env = {'fields':
{'scale_8_int':
{'reg_type': CO, 'address': 1,
'encode': {'e_type': SCALE, 's_factor': 100, 'd_type': INT8}
},
'scale_8_uint':
{'reg_type': CO, 'address': 2,
'encode': {'e_type': SCALE, 's_factor': 10, 'd_type': UINT8}
},
'scale_16_int':
{'reg_type': CO, 'address': 3,
'encode': {'e_type': SCALE, 's_factor': 100, 'd_type': INT16}
},
'scale_16_uint':
{'reg_type': CO, 'address': 4,
'encode': {'e_type': SCALE, 's_factor': 100, 'd_type': UINT16}
},
'scale_32_int':
{'reg_type': CO, 'address': 5, 'encode': {'e_type': SCALE, 'd_type': INT32}
},
'scale_32_uint':
{'reg_type': CO, 'address': 6, 'encode': {'e_type': SCALE, 'd_type': UINT32}
},
'scale_32_float':
{'reg_type': CO, 'address': 7,
'encode': {'e_type': SCALE, 's_factor': 10, 'd_type': FLOAT32}
},
'comb_32_float':
{'reg_type': CO, 'address': 8, 'encode': {'e_type': COMB, 'd_type': FLOAT32}
}},
'byte_order': '<',
'word_order': '<',
'default_scaling_factor': 1000}
test_fields = test_env['fields']
test_handler = PayloadHandler(test_env, test_store)
test_store.setValues(1, 1, test_handler.encode(1, test_fields['scale_8_int']['encode']))
self.assertEqual(1, test_handler.decode(1, 1, test_fields['scale_8_int']['encode']))
test_store.setValues(1, 2, test_handler.encode(10, test_fields['scale_8_uint']['encode']))
self.assertEqual(10, test_handler.decode(1, 2, test_fields['scale_8_uint']['encode']))
test_store.setValues(1, 3, test_handler.encode(12.5, test_fields['scale_16_int']['encode']))
self.assertEqual(12.5, test_handler.decode(1, 3, test_fields['scale_16_int']['encode']))
test_store.setValues(1, 4, test_handler.encode(32.991, test_fields['scale_16_uint']['encode']))
self.assertEqual(32.99, test_handler.decode(1, 4, test_fields['scale_16_uint']['encode']))
test_store.setValues(1, 5, test_handler.encode(1000, test_fields['scale_32_int']['encode']))
self.assertEqual(1000, test_handler.decode(1, 5, test_fields['scale_32_int']['encode']))
test_store.setValues(1, 6, test_handler.encode(63.2, test_fields['scale_32_uint']['encode']))
self.assertEqual(63.2, test_handler.decode(1, 6, test_fields['scale_32_uint']['encode']))
test_store.setValues(1, 7, test_handler.encode(1.333, test_fields['scale_32_float']['encode']))
self.assertEqual(1.3, test_handler.decode(1, 7, test_fields['scale_32_float']['encode']))
test_store.setValues(1, 8, test_handler.encode(789.4375, test_fields['comb_32_float']['encode']))
self.assertEqual(789.4375, test_handler.decode(1, 8, test_fields['comb_32_float']['encode']))
def __init__(self, port):
self.port = port
self.block = ModbusSequentialDataBlock.create()
self.store = ModbusSlaveContext(ir=self.block)
self.context = ModbusServerContext(slaves=self.store, single=True)
self.scheduler = BackgroundScheduler()
params = {
'hour': os.environ.get("VIRTUAL_SERVER_UPDATE_CRON_HOUR_TRIGGER"),
'minute': os.environ.get("VIRTUAL_SERVER_UPDATE_CRON_MINUTE_TRIGGER"),
'second': os.environ.get("VIRTUAL_SERVER_UPDATE_CRON_SECOND_TRIGGER"),
}
self.main_job = self.scheduler.add_job(**params, func=self.set_datastore, trigger='cron')
def initiate_server(identity, inteval, host, port):
"""
Start a Modbus server using the information on
the configuration block above, and set a recurring
call to a function in order to update the values.
"""
# initialize your data store
store = ModbusSlaveContext(
di=ModbusSequentialDataBlock.create(),
co=ModbusSequentialDataBlock.create(),
hr=ModbusSequentialDataBlock.create(),
ir=ModbusSequentialDataBlock.create(),
)
context = ModbusServerContext(slaves=store, single=True)
# Start the Looping callback
loop = LoopingCall(f=updating_writer, context=context)
loop.start(inteval, now=False)
# Start the Modbus server
print("Modbus Server started. Press Cntl + C to stop...")
StartTcpServer(context, identity=identity, address=(host, port))
def run_server():
block = ModbusSequentialDataBlock.create()
store = ModbusSlaveContext(di=block, co=block, hr=block, ir=block)
context = ModbusServerContext(slaves=store, single=True)
identity = ModbusDeviceIdentification()
identity.VendorName = 'Pymodbus'
identity.ProductCode = 'PM'
identity.VendorUrl = 'http://github.com/riptideio/pymodbus/'
identity.ProductName = 'Pymodbus Server'
identity.ModelName = 'Pymodbus Server'
identity.MajorMinorRevision = '1.5'
StartTcpServer(context, identity=identity, address=("0.0.0.0", 502))
def test_decode(self):
test_store = ModbusSlaveContext(t=ModbusSequentialDataBlock.create())
test_env = {'fields':
{'scale_8_int':
{'reg_type': CO, 'address': 1,
'encode': {'e_type': SCALE, 's_factor': 10, 'd_type': INT8}
},
'scale_8_uint':
{'reg_type': CO, 'address': 4,
'encode': {'e_type': SCALE, 's_factor': 10, 'd_type': UINT8}
},
'scale_16_int':
{'reg_type': CO, 'address': 6,
'encode': {'e_type': SCALE, 's_factor': 100, 'd_type': INT16}
},
'scale_16_uint':
{'reg_type': CO, 'address': 8,
'encode': {'e_type': SCALE, 's_factor': 100, 'd_type': UINT16}
}},
'byte_order': '<',
'word_order': '<',
'default_scaling_factor': 1000}
test_fields = test_env['fields']
test_handler = PayloadHandler(test_env, test_store)
test_builder = BinaryPayloadBuilder('<', '<')
test_builder.reset()
test_builder.add_8bit_int(100)
test_store.setValues(1, 1, test_builder.to_registers())
self.assertEqual(10,
test_handler.decode(1, 1, test_fields['scale_8_int']['encode']))
test_builder.reset()
test_builder.add_8bit_uint(100)
test_store.setValues(1, 4, test_builder.to_registers())
self.assertEqual(10,
test_handler.decode(1, 4, test_fields['scale_8_uint']['encode']))
test_builder.reset()
test_builder.add_16bit_int(1350)
test_store.setValues(1, 6, test_builder.to_registers())
self.assertEqual(13.5,
test_handler.decode(1, 6, test_fields['scale_16_int']['encode']))
test_builder.reset()
test_builder.add_16bit_uint(3287)
test_store.setValues(1, 8, test_builder.to_registers())
self.assertEqual(32.87,
test_handler.decode(1, 8, test_fields['scale_16_uint']['encode']))
test_builder.reset()
def test_no_e_type(self):
test_store = ModbusSlaveContext(t=ModbusSequentialDataBlock.create())
test_env = {'fields':
{'8_int':
{'reg_type': CO, 'address': 1,
'encode': {'d_type': INT8}
},
'8_uint':
{'reg_type': CO, 'address': 2,
'encode': {'d_type': UINT8}
},
'16_int':
{'reg_type': CO, 'address': 3,
'encode': {'d_type': INT16}
},
'16_uint':
{'reg_type': CO, 'address': 4,
'encode': {'d_type': UINT16}
},
'32_int':
{'reg_type': CO, 'address': 5,
'encode': {'d_type': INT32}
},
'32_uint':
{'reg_type': CO, 'address': 6,
'encode': {'d_type': UINT32}
}},
'byte_order': '<',
'word_order': '<',
'default_scaling_factor': 1000}
test_fields = test_env['fields']
test_handler = PayloadHandler(test_env, test_store)
test_store.setValues(1, 1, test_handler.encode(1, test_fields['8_int']['encode']))
self.assertEqual(1, test_handler.decode(1, 1, test_fields['8_int']['encode']))
test_store.setValues(1, 2, test_handler.encode(10, test_fields['8_uint']['encode']))
self.assertEqual(10, test_handler.decode(1, 2, test_fields['8_uint']['encode']))
test_store.setValues(1, 3, test_handler.encode(12, test_fields['16_int']['encode']))
self.assertEqual(12, test_handler.decode(1, 3, test_fields['16_int']['encode']))
test_store.setValues(1, 4, test_handler.encode(32, test_fields['16_uint']['encode']))
self.assertEqual(32, test_handler.decode(1, 4, test_fields['16_uint']['encode']))
test_store.setValues(1, 5, test_handler.encode(1000, test_fields['32_int']['encode']))
self.assertEqual(1000, test_handler.decode(1, 5, test_fields['32_int']['encode']))
test_store.setValues(1, 6, test_handler.encode(63, test_fields['32_uint']['encode']))
self.assertEqual(63, test_handler.decode(1, 6, test_fields['32_uint']['encode']))
def test_encode(self):
test_store = ModbusSlaveContext(t=ModbusSequentialDataBlock.create())
test_env = {'fields':
{'scale_8_int':
{'reg_type': CO, 'address': 1,
'encode': {'e_type': SCALE, 's_factor': 10, 'd_type': INT8}
},
'scale_8_uint':
{'reg_type': CO, 'address': 2,
'encode': {'e_type': SCALE, 's_factor': 10, 'd_type': UINT8}
},
'scale_16_int':
{'reg_type': CO, 'address': 3,
'encode': {'e_type': SCALE, 's_factor': 100, 'd_type': INT16}
},
'scale_16_uint':
{'reg_type': CO, 'address': 4,
'encode': {'e_type': SCALE, 's_factor': 100, 'd_type': UINT16}
},
'scale_32_int':
{'reg_type': CO, 'address': 5, 'encode': {'e_type': SCALE, 'd_type': INT32}
},
'scale_32_uint':
{'reg_type': CO, 'address': 6, 'encode': {'e_type': SCALE, 'd_type': UINT32}
},
'scale_32_float':
{'reg_type': CO, 'address': 7,
'encode': {'e_type': SCALE, 's_factor': 10, 'd_type': FLOAT32}
},
'comb_32_float':
{'reg_type': CO, 'address': 8, 'encode': {'e_type': COMB, 'd_type': FLOAT32}
}},
'byte_order': '<',
'word_order': '<',
'default_scaling_factor': 1000}
test_fields = test_env['fields']
test_handler = PayloadHandler(test_env, test_store)
self.assertEqual(100, BinaryPayloadDecoder.fromRegisters(
test_handler.encode(10, test_fields['scale_8_int']['encode']),
byteorder='<', wordorder='<').decode_8bit_int())
self.assertEqual(100, BinaryPayloadDecoder.fromRegisters(
test_handler.encode(10, test_fields['scale_8_uint']['encode']),
byteorder='<', wordorder='<').decode_8bit_uint())
self.assertEqual(1250, BinaryPayloadDecoder.fromRegisters(
test_handler.encode(12.5, test_fields['scale_16_int']['encode']),
byteorder='<', wordorder='<').decode_16bit_int())
self.assertEqual(3299, BinaryPayloadDecoder.fromRegisters(
test_handler.encode(32.991, test_fields['scale_16_uint']['encode']),
byteorder='<', wordorder='<').decode_16bit_uint())
self.assertEqual(1000000, BinaryPayloadDecoder.fromRegisters(
test_handler.encode(1000, test_fields['scale_32_int']['encode']),
byteorder='<', wordorder='<').decode_32bit_int())
self.assertEqual(63200, BinaryPayloadDecoder.fromRegisters(
test_handler.encode(63.2, test_fields['scale_32_uint']['encode']),
byteorder='<', wordorder='<').decode_32bit_uint())
self.assertEqual(13, BinaryPayloadDecoder.fromRegisters(
test_handler.encode(1.333, test_fields['scale_32_float']['encode']),
byteorder='<', wordorder='<').decode_32bit_float())
self.assertEqual(789.4375, BinaryPayloadDecoder.fromRegisters(
test_handler.encode(789.4375, test_fields['comb_32_float']['encode']),
byteorder='<', wordorder='<').decode_32bit_float())
def run_server():
# ----------------------------------------------------------------------- #
# initialize your data store
# ----------------------------------------------------------------------- #
# The datastores only respond to the addresses that they are initialized to
# Therefore, if you initialize a DataBlock to addresses of 0x00 to 0xFF, a
# request to 0x100 will respond with an invalid address exception. This is
# because many devices exhibit this kind of behavior (but not all)::
#
# block = ModbusSequentialDataBlock(0x00, [0]*0xff)
#
# Continuing, you can choose to use a sequential or a sparse DataBlock in
# your data context. The difference is that the sequential has no gaps in
# the data while the sparse can. Once again, there are devices that exhibit
# both forms of behavior::
#
# block = ModbusSparseDataBlock({0x00: 0, 0x05: 1})
# block = ModbusSequentialDataBlock(0x00, [0]*5)
#
# Alternately, you can use the factory methods to initialize the DataBlocks
# or simply do not pass them to have them initialized to 0x00 on the full
# address range::
#
# store = ModbusSlaveContext(di = ModbusSequentialDataBlock.create())
# store = ModbusSlaveContext()
#
# Finally, you are allowed to use the same DataBlock reference for every
# table or you may use a separate DataBlock for each table.
# This depends if you would like functions to be able to access and modify
# the same data or not::
#
# block = ModbusSequentialDataBlock(0x00, [0]*0xff)
# store = ModbusSlaveContext(di=block, co=block, hr=block, ir=block)
#
# The server then makes use of a server context that allows the server to
# respond with different slave contexts for different unit ids. By default
# it will return the same context for every unit id supplied (broadcast
# mode).
# However, this can be overloaded by setting the single flag to False and
# then supplying a dictionary of unit id to context mapping::
#
# slaves = {
# 0x01: ModbusSlaveContext(...),
# 0x02: ModbusSlaveContext(...),
# 0x03: ModbusSlaveContext(...),
# }
# context = ModbusServerContext(slaves=slaves, single=False)
#
# The slave context can also be initialized in zero_mode which means that a
# request to address(0-7) will map to the address (0-7). The default is
# False which is based on section 4.4 of the specification, so address(0-7)
# will map to (1-8)::
#
# store = ModbusSlaveContext(..., zero_mode=True)
# ----------------------------------------------------------------------- #
# store = ModbusSlaveContext(
# di=ModbusSequentialDataBlock(0, [17]*100),
# co=ModbusSequentialDataBlock(0, [17]*100),
# hr=ModbusSequentialDataBlock(0, [17]*100),
# ir=ModbusSequentialDataBlock(0, [17]*100))
store = ModbusSlaveContext(di=ModbusSequentialDataBlock.create())
store = ModbusSlaveContext()
context = ModbusServerContext(slaves=store, single=True)
# ----------------------------------------------------------------------- #
# initialize the server information
# ----------------------------------------------------------------------- #
# If you don't set this or any fields, they are defaulted to empty strings.
# ----------------------------------------------------------------------- #
identity = ModbusDeviceIdentification()
identity.VendorName = 'Pymodbus'
identity.ProductCode = 'PM'
identity.VendorUrl = 'http://github.com/riptideio/pymodbus/'
identity.ProductName = 'Pymodbus Server'
identity.ModelName = 'Pymodbus Server'
identity.MajorMinorRevision = '2.3.0'
# ----------------------------------------------------------------------- #
# run the server you want
# ----------------------------------------------------------------------- #
# Tcp:
StartTcpServer(context, identity=identity, address=("", 502))
class Battery:
"""
Battery represents the Server/Slave. Basically is a modbus server wrapper.
"""
"""
Initialize the store and the context
"""
store = ModbusSlaveContext(di=ModbusSequentialDataBlock.create(),
co=ModbusSequentialDataBlock.create(),
hr=ModbusSequentialDataBlock.create(),
ir=ModbusSequentialDataBlock.create())
context = ModbusServerContext(slaves=store, single=True)
def __init__(self, env):
self.fields = env['fields']
self.id = env['id']
self.max_capacity = env['battery_capacity']
self.payload_handler = PayloadHandler(env['float_store'], self.store)
self.set_initial_values()
self.run_server(self.context, env['server_address'])
def set_initial_values(self):
"""
setting initial values to fields which have 'init' keyword in their dictionary
"""
for field_name in self.fields:
if 'init' in self.fields[field_name]:
self.set_value(self.fields[field_name],
self.fields[field_name]['init'])
def set_value(self, field, value):
"""
sets the value to the given field; ALL data which is assigned to 16-bit registers (meaning fx > 2) will
be encoded by payload_handler
:param field: a field from the the dictionary (fields[field_name])
:param value: value to set
"""
fx = field['reg_type']
addr = field['address']
if fx > 2:
mode = field['encode']
value = self.payload_handler.encode(value, mode)
self.store.setValues(fx, addr, value)
else:
self.store.setValues(fx, addr, [value])
def get_value(self, field):
"""
gets the value of a given field; ALL data from 16-bit registers (meaning fx > 2) will be decoded by
payload_handler
:param field: a field from the the dictionary (fields[field_name])
:return: value of the given field
"""
fx = field['reg_type']
addr = field['address']
if fx <= 2:
value = int(self.store.getValues(fx, addr, 1)[0])
elif fx > 2:
mode = field['encode']
value = self.payload_handler.decode(fx, addr, mode)
return value
def is_input_connected(self):
return self.get_value(self.fields['input_connected'])
def is_converter_started(self):
return self.get_value(self.fields['converter_started'])
def run_server(self, context, env):
"""
starts the servers with filled in context
runs in separate thread
"""
t = threading.Thread(target=StartTcpServer,
kwargs={
'context': context,
'address': tuple(env)
},
daemon=True)
t.start()
print("SERVER: is running")