def __init__(self, parent = None, logger = Logger()):
QWidgetWithLogger.__init__(self, parent, logger)
# start widget
vbox = QVBoxLayout()
vbox.setMargin(0)
vbox.setContentsMargins(0, 0, 0, 0)
# parameter action server topic selection
topic_widget = QTopicWidget(self, 'vigir_footstep_planning_msgs/GetParameterSetNamesAction', True)
vbox.addWidget(topic_widget)
# parameter set selection
self.parameter_set_selection_widget = QParameterSetSelectionWidget(self, logger)
self.parameter_set_selection_widget.param_cleared_signal.connect(self.param_cleared)
self.parameter_set_selection_widget.param_changed_signal.connect(self.param_changed)
topic_widget.topic_changed_signal.connect(self.topic_changed)
topic_widget.topic_changed_signal.connect(self.parameter_set_selection_widget.set_topic_name)
vbox.addWidget(self.parameter_set_selection_widget)
# end widget
self.setLayout(vbox)
# init widget
topic_widget.emit_topic_name()
def __init__(self, parent=None, logger=Logger()):
QWidgetWithLogger.__init__(self, parent, logger)
# start widget
vbox = QVBoxLayout()
vbox.setMargin(0)
vbox.setContentsMargins(0, 0, 0, 0)
# parameter action server topic selection
topic_widget = QTopicWidget(
self, 'vigir_generic_params/GetParameterSetNamesAction', True)
vbox.addWidget(topic_widget)
# parameter set selection
self.parameter_set_selection_widget = QParameterSetSelectionWidget(
self, logger)
self.parameter_set_selection_widget.param_cleared_signal.connect(
self.param_cleared)
self.parameter_set_selection_widget.param_changed_signal.connect(
self.param_changed)
topic_widget.topic_changed_signal.connect(self.topic_changed)
topic_widget.topic_changed_signal.connect(
self.parameter_set_selection_widget.set_topic_name)
vbox.addWidget(self.parameter_set_selection_widget)
# end widget
self.setLayout(vbox)
# init widget
topic_widget.emit_topic_name()
def __init__(self, parent = None, logger = Logger(), step_plan_topic = str()):
QWidgetWithLogger.__init__(self, parent, logger)
# start widget
vbox = QVBoxLayout()
vbox.setMargin(0)
vbox.setContentsMargins(0, 0, 0, 0)
# step plan input topic selection
if len(step_plan_topic) == 0:
step_plan_topic_widget = QTopicWidget(topic_type = 'vigir_footstep_planning_msgs/StepPlan')
step_plan_topic_widget.topic_changed_signal.connect(self._init_step_plan_subscriber)
vbox.addWidget(step_plan_topic_widget)
else:
self._init_step_plan_subscriber(step_plan_topic)
# execute action server topic selection
execute_topic_widget = QTopicWidget(topic_type = 'vigir_footstep_planning_msgs/ExecuteStepPlanAction', is_action_topic = True)
execute_topic_widget.topic_changed_signal.connect(self._init_execute_action_client)
vbox.addWidget(execute_topic_widget)
# start button part
buttons_hbox = QHBoxLayout()
buttons_hbox.setMargin(0)
# execute
self.execute_command = QPushButton("Execute (Steps: 0)")
self.execute_command.clicked.connect(self.execute_command_callback)
self.execute_command.setEnabled(False)
buttons_hbox.addWidget(self.execute_command)
# repeat
self.repeat_command = QPushButton("Repeat")
self.repeat_command.clicked.connect(self.execute_command_callback)
self.repeat_command.setEnabled(False)
buttons_hbox.addWidget(self.repeat_command)
# stop
self.stop_command = QPushButton("Stop")
self.stop_command.clicked.connect(self.stop_command_callback)
self.stop_command.setEnabled(False)
buttons_hbox.addWidget(self.stop_command)
# end button part
vbox.addLayout(buttons_hbox)
# end widget
self.setLayout(vbox)
# init widget
if len(step_plan_topic) == 0:
step_plan_topic_widget.emit_topic_name()
execute_topic_widget.emit_topic_name()
def __init__(self, parent=None, subscribe=False):
QWidget.__init__(self, parent)
# start widget
vbox = QVBoxLayout()
vbox.setMargin(0)
vbox.setContentsMargins(0, 0, 0, 0)
# add error status text edit
self.error_status_text_box = QErrorStatusTextBox()
self.error_status_text_box_layout = QHBoxLayout()
self.error_status_text_box_layout.addWidget(self.error_status_text_box)
vbox.addLayout(self.error_status_text_box_layout)
# add panel
hbox = QHBoxLayout()
# clear push button
self.execute_command = QPushButton("Clear")
self.execute_command.clicked.connect(self.error_status_text_box.clear)
hbox.addWidget(self.execute_command)
hbox.addStretch()
# hide window checkbox
hide_window_check_box = QCheckBox("Hide")
hide_window_check_box.stateChanged.connect(self.state_changed)
hbox.addWidget(hide_window_check_box)
# end panel
vbox.addLayout(hbox)
# end widget
self.setLayout(vbox)
#self.setSizePolicy(QSizePolicy.Expanding, QSizePolicy.Minimum)
# subscriber
if subscribe:
self.error_status_sub = rospy.Subscriber("error_status", ErrorStatus, self.error_status_callback)
self.subscribed = subscribe
# connect signal slot internally to prevent crash by subscriber
self.error_status_signal.connect(self.append_error_status)
def __init__(self, parent = None, subscribe = False):
QWidget.__init__(self, parent)
# start widget
vbox = QVBoxLayout()
vbox.setMargin(0)
vbox.setContentsMargins(0, 0, 0, 0)
# add error status text edit
self.error_status_text_box = QErrorStatusTextBox()
self.error_status_text_box_layout = QHBoxLayout()
self.error_status_text_box_layout.addWidget(self.error_status_text_box)
vbox.addLayout(self.error_status_text_box_layout)
# add panel
hbox = QHBoxLayout()
# clear push button
self.execute_command = QPushButton("Clear")
self.execute_command.clicked.connect(self.error_status_text_box.clear)
hbox.addWidget(self.execute_command)
hbox.addStretch()
# hide window checkbox
hide_window_check_box = QCheckBox("Hide")
hide_window_check_box.stateChanged.connect(self.state_changed)
hbox.addWidget(hide_window_check_box)
# end panel
vbox.addLayout(hbox)
# end widget
self.setLayout(vbox)
#self.setSizePolicy(QSizePolicy.Expanding, QSizePolicy.Minimum)
# subscriber
if (subscribe):
self.error_status_sub = rospy.Subscriber("error_status", ErrorStatus, self.error_status_callback)
self.subscribed = subscribe
# connect signal slot internally to prevent crash by subscriber
self.error_status_signal.connect(self.append_error_status)
def __init__(self, parent=None, logger=Logger()):
QWidgetWithLogger.__init__(self, parent, logger)
# start widget
vbox = QVBoxLayout()
vbox.setMargin(0)
vbox.setContentsMargins(0, 0, 0, 0)
# add layout which is dynamically filled
self.parameter_tree_widget = QParameterTreeWidget(logger=self.logger)
vbox.addWidget(self.parameter_tree_widget)
# button panel
vbox_commands = QVBoxLayout()
hbox = QHBoxLayout()
# upload topic
send_parameter_topic_widget = QTopicWidget(self, 'vigir_footstep_planning_msgs/SetParameterSetAction', True)
send_parameter_topic_widget.topic_changed_signal.connect(self._init_upload_paramater_set_client)
hbox.addWidget(send_parameter_topic_widget)
# upload command
self.upload_command = QPushButton("Upload")
self.upload_command.clicked.connect(self.upload_parameters)
hbox.addWidget(self.upload_command)
vbox_commands.addLayout(hbox)
# reload command
self.reload_command = QPushButton("Reload")
self.reload_command.clicked.connect(self.reload_parameters)
vbox_commands.addWidget(self.reload_command)
# add button panel
vbox.addLayout(vbox_commands)
# end widget
self.setLayout(vbox)
# init
self.clear()
send_parameter_topic_widget.emit_topic_name()
def __init__(self, context, add_execute_widget=True):
super(StepInterfaceWidget, self).__init__()
# init signal mapper
self.command_mapper = QSignalMapper(self)
self.command_mapper.mapped.connect(self._publish_step_plan_request)
# start widget
widget = context
error_status_widget = QErrorStatusWidget()
self.logger = Logger(error_status_widget)
vbox = QVBoxLayout()
# start control box
controls_hbox = QHBoxLayout()
# left coloumn
left_controls_vbox = QVBoxLayout()
left_controls_vbox.setMargin(0)
self.add_command_button(left_controls_vbox, "Rotate Left",
PatternParameters.ROTATE_LEFT)
self.add_command_button(left_controls_vbox, "Strafe Left",
PatternParameters.STRAFE_LEFT)
self.add_command_button(left_controls_vbox, "Step Up",
PatternParameters.STEP_UP)
self.add_command_button(left_controls_vbox, "Center on Left",
PatternParameters.FEET_REALIGN_ON_LEFT)
left_controls_vbox.addStretch()
controls_hbox.addLayout(left_controls_vbox, 1)
# center coloumn
center_controls_vbox = QVBoxLayout()
center_controls_vbox.setMargin(0)
self.add_command_button(center_controls_vbox, "Forward",
PatternParameters.FORWARD)
self.add_command_button(center_controls_vbox, "Backward",
PatternParameters.BACKWARD)
self.add_command_button(center_controls_vbox, "Step Over",
PatternParameters.STEP_OVER)
self.add_command_button(center_controls_vbox, "Center Feet",
PatternParameters.FEET_REALIGN_ON_CENTER)
self.add_command_button(center_controls_vbox, "Wide Stance",
PatternParameters.WIDE_STANCE)
center_controls_vbox.addStretch()
controls_hbox.addLayout(center_controls_vbox, 1)
# right coloumn
right_controls_vbox = QVBoxLayout()
right_controls_vbox.setMargin(0)
self.add_command_button(right_controls_vbox, "Rotate Right",
PatternParameters.ROTATE_RIGHT)
self.add_command_button(right_controls_vbox, "Strafe Right",
PatternParameters.STRAFE_RIGHT)
self.add_command_button(right_controls_vbox, "Step Down",
PatternParameters.STEP_DOWN)
self.add_command_button(right_controls_vbox, "Center on Right",
PatternParameters.FEET_REALIGN_ON_RIGHT)
right_controls_vbox.addStretch()
controls_hbox.addLayout(right_controls_vbox, 1)
# end control box
add_layout_with_frame(vbox, controls_hbox, "Commands:")
# start settings
settings_hbox = QHBoxLayout()
settings_hbox.setMargin(0)
# start left column
left_settings_vbox = QVBoxLayout()
left_settings_vbox.setMargin(0)
# frame id
self.frame_id_line_edit = QLineEdit("/world")
add_widget_with_frame(left_settings_vbox, self.frame_id_line_edit,
"Frame ID:")
# do closing step
self.close_step_checkbox = QCheckBox()
self.close_step_checkbox.setText("Do closing step")
self.close_step_checkbox.setChecked(True)
left_settings_vbox.addWidget(self.close_step_checkbox)
# extra seperation
self.extra_seperation_checkbox = QCheckBox()
self.extra_seperation_checkbox.setText("Extra Seperation")
self.extra_seperation_checkbox.setChecked(False)
left_settings_vbox.addWidget(self.extra_seperation_checkbox)
left_settings_vbox.addStretch()
# number of steps
self.step_number = generate_q_double_spin_box(1, 1, 50, 0, 1.0)
add_widget_with_frame(left_settings_vbox, self.step_number,
"Number Steps:")
# start step index
self.start_step_index = generate_q_double_spin_box(0, 0, 1000, 0, 1.0)
add_widget_with_frame(left_settings_vbox, self.start_step_index,
"Start Step Index:")
# end left column
settings_hbox.addLayout(left_settings_vbox, 1)
# start center column
center_settings_vbox = QVBoxLayout()
center_settings_vbox.setMargin(0)
# start foot selection
self.start_foot_selection_combo_box = QComboBox()
self.start_foot_selection_combo_box.addItem("AUTO")
self.start_foot_selection_combo_box.addItem("LEFT")
self.start_foot_selection_combo_box.addItem("RIGHT")
add_widget_with_frame(center_settings_vbox,
self.start_foot_selection_combo_box,
"Start foot selection:")
center_settings_vbox.addStretch()
# step Distance
self.step_distance = generate_q_double_spin_box(0.0, 0.0, 0.5, 2, 0.01)
add_widget_with_frame(center_settings_vbox, self.step_distance,
"Step Distance (m):")
# side step distance
self.side_step = generate_q_double_spin_box(0.0, 0.0, 0.2, 2, 0.01)
add_widget_with_frame(center_settings_vbox, self.side_step,
"Side Step (m):")
# rotation per step
self.step_rotation = generate_q_double_spin_box(
0.0, -30.0, 30.0, 0, 1.0)
add_widget_with_frame(center_settings_vbox, self.step_rotation,
"Step Rotation (deg):")
# end center column
settings_hbox.addLayout(center_settings_vbox, 1)
# start right column
right_settings_vbox = QVBoxLayout()
right_settings_vbox.setMargin(0)
# roll
self.roll = generate_q_double_spin_box(0.0, -30.0, 30.0, 0, 1.0)
add_widget_with_frame(right_settings_vbox, self.roll, "Roll (deg):")
# pitch
self.pitch = generate_q_double_spin_box(0.0, -30.0, 30.0, 0, 1.0)
add_widget_with_frame(right_settings_vbox, self.pitch, "Pitch (deg):")
# use terrain model
self.use_terrain_model_checkbox = QCheckBox()
self.use_terrain_model_checkbox.setText("Use Terrain Model")
self.use_terrain_model_checkbox.setChecked(False)
self.use_terrain_model_checkbox.stateChanged.connect(
self.use_terrain_model_changed)
right_settings_vbox.addWidget(self.use_terrain_model_checkbox)
# override mode
self.override_checkbox = QCheckBox()
self.override_checkbox.setText("Override 3D")
self.override_checkbox.setChecked(False)
right_settings_vbox.addWidget(self.override_checkbox)
right_settings_vbox.addStretch()
# delta z
self.dz = generate_q_double_spin_box(0.0, -0.5, 0.5, 2, 0.01)
add_widget_with_frame(right_settings_vbox, self.dz,
"delta z per step (m):")
# end right column
settings_hbox.addLayout(right_settings_vbox, 1)
# end settings
add_layout_with_frame(vbox, settings_hbox, "Settings:")
# parameter set selection
self.parameter_set_widget = QParameterSetWidget(logger=self.logger)
add_widget_with_frame(vbox, self.parameter_set_widget,
"Parameter Set:")
# execute option
if add_execute_widget:
add_widget_with_frame(
vbox,
QExecuteStepPlanWidget(logger=self.logger,
step_plan_topic="step_plan"),
"Execute:")
# add error status widget
add_widget_with_frame(vbox, error_status_widget, "Status:")
# end widget
widget.setLayout(vbox)
#context.add_widget(widget)
# init widget
self.parameter_set_widget.param_cleared_signal.connect(
self.param_cleared)
self.parameter_set_widget.param_changed_signal.connect(
self.param_selected)
self.commands_set_enabled(False)
# subscriber
self.start_feet_sub = rospy.Subscriber("set_start_feet", Feet,
self.set_start_feet_callback)
# publisher
self.step_plan_pub = rospy.Publisher("step_plan",
StepPlan,
queue_size=1)
# action clients
self.step_plan_request_client = actionlib.SimpleActionClient(
"step_plan_request", StepPlanRequestAction)
def __init__(self, context, add_execute_widget = True):
super(StepInterfaceWidget, self).__init__()
# init signal mapper
self.command_mapper = QSignalMapper(self)
self.command_mapper.mapped.connect(self._publish_step_plan_request)
# start widget
widget = context
error_status_widget = QErrorStatusWidget()
self.logger = Logger(error_status_widget)
vbox = QVBoxLayout()
# start control box
controls_hbox = QHBoxLayout()
# left coloumn
left_controls_vbox = QVBoxLayout()
left_controls_vbox.setMargin(0)
self.add_command_button(left_controls_vbox, "Rotate Left", PatternParameters.ROTATE_LEFT)
self.add_command_button(left_controls_vbox, "Strafe Left", PatternParameters.STRAFE_LEFT)
self.add_command_button(left_controls_vbox, "Step Up", PatternParameters.STEP_UP)
self.add_command_button(left_controls_vbox, "Center on Left", PatternParameters.FEET_REALIGN_ON_LEFT)
left_controls_vbox.addStretch()
controls_hbox.addLayout(left_controls_vbox, 1)
# center coloumn
center_controls_vbox = QVBoxLayout()
center_controls_vbox.setMargin(0)
self.add_command_button(center_controls_vbox, "Forward", PatternParameters.FORWARD)
self.add_command_button(center_controls_vbox, "Backward", PatternParameters.BACKWARD)
self.add_command_button(center_controls_vbox, "Step Over", PatternParameters.STEP_OVER)
self.add_command_button(center_controls_vbox, "Center Feet", PatternParameters.FEET_REALIGN_ON_CENTER)
self.add_command_button(center_controls_vbox, "Wide Stance", PatternParameters.WIDE_STANCE)
center_controls_vbox.addStretch()
controls_hbox.addLayout(center_controls_vbox, 1)
# right coloumn
right_controls_vbox = QVBoxLayout()
right_controls_vbox.setMargin(0)
self.add_command_button(right_controls_vbox, "Rotate Right", PatternParameters.ROTATE_RIGHT)
self.add_command_button(right_controls_vbox, "Strafe Right", PatternParameters.STRAFE_RIGHT)
self.add_command_button(right_controls_vbox, "Step Down", PatternParameters.STEP_DOWN)
self.add_command_button(right_controls_vbox, "Center on Right", PatternParameters.FEET_REALIGN_ON_RIGHT)
right_controls_vbox.addStretch()
controls_hbox.addLayout(right_controls_vbox, 1)
# end control box
add_layout_with_frame(vbox, controls_hbox, "Commands:")
# start settings
settings_hbox = QHBoxLayout()
settings_hbox.setMargin(0)
# start left column
left_settings_vbox = QVBoxLayout()
left_settings_vbox.setMargin(0)
# frame id
self.frame_id_line_edit = QLineEdit("/world")
add_widget_with_frame(left_settings_vbox, self.frame_id_line_edit, "Frame ID:")
# do closing step
self.close_step_checkbox = QCheckBox()
self.close_step_checkbox.setText("Do closing step")
self.close_step_checkbox.setChecked(True)
left_settings_vbox.addWidget(self.close_step_checkbox)
# extra seperation
self.extra_seperation_checkbox = QCheckBox()
self.extra_seperation_checkbox.setText("Extra Seperation")
self.extra_seperation_checkbox.setChecked(False)
left_settings_vbox.addWidget(self.extra_seperation_checkbox)
left_settings_vbox.addStretch()
# number of steps
self.step_number = generate_q_double_spin_box(1, 1, 50, 0, 1.0)
add_widget_with_frame(left_settings_vbox, self.step_number, "Number Steps:")
# start step index
self.start_step_index = generate_q_double_spin_box(0, 0, 1000, 0, 1.0)
add_widget_with_frame(left_settings_vbox, self.start_step_index, "Start Step Index:")
# end left column
settings_hbox.addLayout(left_settings_vbox, 1)
# start center column
center_settings_vbox = QVBoxLayout()
center_settings_vbox.setMargin(0)
# start foot selection
self.start_foot_selection_combo_box = QComboBox()
self.start_foot_selection_combo_box.addItem("AUTO")
self.start_foot_selection_combo_box.addItem("LEFT")
self.start_foot_selection_combo_box.addItem("RIGHT")
add_widget_with_frame(center_settings_vbox, self.start_foot_selection_combo_box, "Start foot selection:")
center_settings_vbox.addStretch()
# step Distance
self.step_distance = generate_q_double_spin_box(0.20, 0.0, 0.5, 2, 0.01)
add_widget_with_frame(center_settings_vbox, self.step_distance, "Step Distance (m):")
# side step distance
self.side_step = generate_q_double_spin_box(0.0, 0.0, 0.2, 2, 0.01)
add_widget_with_frame(center_settings_vbox, self.side_step, "Side Step (m):")
# rotation per step
self.step_rotation = generate_q_double_spin_box(0.0, -30.0, 30.0, 0, 1.0)
add_widget_with_frame(center_settings_vbox, self.step_rotation, "Step Rotation (deg):")
# end center column
settings_hbox.addLayout(center_settings_vbox, 1)
# start right column
right_settings_vbox = QVBoxLayout()
right_settings_vbox.setMargin(0)
# roll
self.roll = generate_q_double_spin_box(0.0, -30.0, 30.0, 0, 1.0)
add_widget_with_frame(right_settings_vbox, self.roll, "Roll (deg):")
# pitch
self.pitch = generate_q_double_spin_box(0.0, -30.0, 30.0, 0, 1.0)
add_widget_with_frame(right_settings_vbox, self.pitch, "Pitch (deg):")
# use terrain model
self.use_terrain_model_checkbox = QCheckBox()
self.use_terrain_model_checkbox.setText("Use Terrain Model")
self.use_terrain_model_checkbox.setChecked(False)
self.use_terrain_model_checkbox.stateChanged.connect(self.use_terrain_model_changed)
right_settings_vbox.addWidget(self.use_terrain_model_checkbox)
# override mode
self.override_checkbox = QCheckBox()
self.override_checkbox.setText("Override 3D")
self.override_checkbox.setChecked(False)
right_settings_vbox.addWidget(self.override_checkbox)
right_settings_vbox.addStretch()
# delta z
self.dz = generate_q_double_spin_box(0.0, -0.5, 0.5, 2, 0.01)
add_widget_with_frame(right_settings_vbox, self.dz, "delta z per step (m):")
# end right column
settings_hbox.addLayout(right_settings_vbox, 1)
# end settings
add_layout_with_frame(vbox, settings_hbox, "Settings:")
# parameter set selection
self.parameter_set_widget = QParameterSetWidget(logger = self.logger)
add_widget_with_frame(vbox, self.parameter_set_widget, "Parameter Set:")
# execute option
if add_execute_widget:
add_widget_with_frame(vbox, QExecuteStepPlanWidget(logger = self.logger, step_plan_topic = "step_plan"), "Execute:")
# add error status widget
add_widget_with_frame(vbox, error_status_widget, "Status:")
# end widget
widget.setLayout(vbox)
#context.add_widget(widget)
# init widget
self.parameter_set_widget.param_cleared_signal.connect(self.param_cleared)
self.parameter_set_widget.param_changed_signal.connect(self.param_selected)
self.commands_set_enabled(False)
# subscriber
self.start_feet_sub = rospy.Subscriber("set_start_feet", Feet, self.set_start_feet_callback)
# publisher
self.step_plan_pub = rospy.Publisher("step_plan", StepPlan, queue_size=1)
# action clients
self.step_plan_request_client = actionlib.SimpleActionClient("step_plan_request", StepPlanRequestAction)
def __init__(self, parent=None, logger=Logger(), step_plan_topic=str()):
super(QExecuteStepPlanWidget, self).__init__(parent, logger)
# start widget
vbox = QVBoxLayout()
vbox.setMargin(0)
vbox.setContentsMargins(0, 0, 0, 0)
# step plan input topic selection
if len(step_plan_topic) == 0:
step_plan_topic_widget = QTopicWidget(
topic_type='vigir_footstep_planning_msgs/StepPlan')
step_plan_topic_widget.topic_changed_signal.connect(
self._init_step_plan_subscriber)
vbox.addWidget(step_plan_topic_widget)
else:
self._init_step_plan_subscriber(step_plan_topic)
# execute action server topic selection
execute_topic_widget = QTopicWidget(
topic_type='vigir_footstep_planning_msgs/ExecuteStepPlanAction',
is_action_topic=True)
execute_topic_widget.topic_changed_signal.connect(
self._init_execute_action_client)
vbox.addWidget(execute_topic_widget)
# load execute widget from ui
execute_step_plan_widget = QWidget()
rp = rospkg.RosPack()
ui_file = os.path.join(rp.get_path('vigir_footstep_planning_lib'),
'resource', 'execute_step_plan.ui')
loadUi(ui_file, execute_step_plan_widget, {'QWidget': QWidget})
vbox.addWidget(execute_step_plan_widget)
# execute
self.execute_button = execute_step_plan_widget.executePushButton
self.execute_button.clicked.connect(self.execute_button_callback)
# repeat
self.repeat_button = execute_step_plan_widget.repeatPushButton
self.repeat_button.clicked.connect(self.execute_button_callback)
# stop
self.stop_button = execute_step_plan_widget.stopPushButton
self.stop_button.clicked.connect(self.stop_button_callback)
# progress bar
self.execution_progress_bar = execute_step_plan_widget.executionProgressBar
self.execution_progress_bar.setFormat("0/0")
self.step_queue_size_signal.connect(
self.execution_progress_bar.setMaximum)
self.executed_steps_signal.connect(
self.execution_progress_bar.setValue)
# status info
self.status_line_edit = execute_step_plan_widget.statusLineEdit
# step queue info
self.step_queue_line_edit = execute_step_plan_widget.stepQueueLineEdit
# first changeable step info
self.first_changeable_step_line_edit = execute_step_plan_widget.firstChangeableLineEdit
# end widget
self.setLayout(vbox)
self.reset_ui()
# init widget
if len(step_plan_topic) == 0:
step_plan_topic_widget.emit_topic_name()
execute_topic_widget.emit_topic_name()
