def send_all_off(dev): cv = [0 for v in range(0, 512)] try: sent = dev.send_multi_value(1, cv) except: dev = pyudmx.uDMXDevice() dev.open()
def main():
"""
How to control a DMX light through an Anyma USB controller
"""
# Channel value list for channels 1-512
cv = [0 for v in range(0, 512)]
# Create an instance of the DMX controller and open it
print("Opening DMX controller...")
dev = pyudmx.uDMXDevice()
# This will automagically find a single Anyma-type USB DMX controller
dev.open()
# For informational purpose, display what we know about the DMX controller
print(dev.Device)
# Send messages to the light changing it to red, then green, then blue
# This is the "hard way" to do it, but illustrates how it's done
print("Setting to red...")
cv[0] = 255 # red
cv[6] = 128 # dimmer to half value
sent = dev.send_multi_value(1, cv)
print("Set to red")
sleep(3.0)
print("Setting to green...")
cv[0] = 0 # red
cv[1] = 255 # green
cv[6] = 128 # dimmer to half value
sent = dev.send_multi_value(1, cv)
print("Set to green")
sleep(3.0)
print("Setting to blue...")
cv[0] = 0 # red
cv[1] = 0 # green
cv[2] = 255 # blue
cv[6] = 128 # dimmer to half value
sent = dev.send_multi_value(1, cv)
print("Set to blue")
sleep(3.0)
# Here's an easier way to do it
print("And, again the easier way")
send_rgb(dev, 255, 0, 0, 128)
sleep(3.0)
send_rgb(dev, 0, 255, 0, 128)
sleep(3.0)
send_rgb(dev, 0, 0, 255, 128)
sleep(3.0)
print("Reset all channels and close..")
# Turns the light off
cv = [0 for v in range(0, 512)]
dev.send_multi_value(1, cv)
dev.close()
def main():
"""
How to control a DMX light through an Anyma USB controller
"""
# Channel value list for channels 1-512
cv = [0 for v in range(0, 512)]
# Create an instance of the DMX controller and open it
print("Opening DMX controller...")
dev = pyudmx.uDMXDevice()
# This will automagically find a single Anyma-type USB DMX controller
dev.open()
# For informational purpose, display what we know about the DMX controller
print(dev.Device)
# Send messages to the light changing it to red, then green, then blue
# This is the "hard way" to do it, but illustrates how it's done
print("Setting to red...")
cv[0] = 255 # red
cv[6] = 128 # dimmer to half value
sent = dev.send_multi_value(1, cv)
print("Set to red")
sleep(3.0)
print("Setting to green...")
cv[0] = 0 # red
cv[1] = 255 # green
cv[6] = 128 # dimmer to half value
sent = dev.send_multi_value(1, cv)
print("Set to green")
sleep(3.0)
print("Setting to blue...")
cv[0] = 0 # red
cv[1] = 0 # green
cv[2] = 255 # blue
cv[6] = 128 # dimmer to half value
sent = dev.send_multi_value(1, cv)
print("Set to blue")
sleep(3.0)
# Here's an easier way to do it
print("And, again the easier way")
send_rgb(dev, 255, 0, 0, 128)
sleep(3.0)
send_rgb(dev, 0, 255, 0, 128)
sleep(3.0)
send_rgb(dev, 0, 0, 255, 128)
sleep(3.0)
print("Reset all channels and close..")
# Turns the light off
cv = [0 for v in range(0, 512)]
dev.send_multi_value(1, cv)
dev.close()
def main():
cv = [0 for v in range(0, 512)]
dev = pyudmx.uDMXDevice()
dev.open()
while True:
send_rgb(dev, 255, 20, 147)
sleep(3.0)
send_rgb(dev, 0, 0, 255)
sleep(3.0)
dev.close()
def __connect(self):
# Try to close if exists
if self.udmx is not None:
try:
self.udmx.close()
except Exception:
pass
# Get new device
self.udmx = pyudmx.uDMXDevice()
self.udmx.open()
def __connect(self):
# Try to close if exists
if self.__udmx is not None:
try:
self.__udmx.close()
except Exception:
pass
# Get new device
self.__udmx = pyudmx.uDMXDevice()
self.__udmx.open(self.__udmx_vendor_id, self.__udmx_product_id,
self.__udmx_bus, self.__udmx_address)
def send_all_fade(dev, speed): cv = [0 for v in range(0, 512)] for x in range(0,31): cv[5+(x*8)] = 128 cv[6+(x*8)] = 255 cv[4+(x*8)] = speed try: sent = dev.send_multi_value(1, cv) except: dev = pyudmx.uDMXDevice() dev.open()
def dmx_init():
global _dmx
print('DEBUG:dmx:48 Starting DMX controller')
_dmx = pyudmx.uDMXDevice()
if HAVE_DMX_HARDWARE: _dmx.open()
# Start a separate thread for the USB data transfers (IO bound)
if not _dmx_transfer:
transfer_loop = threading.Thread(target=usb_transfer_loop)
transfer_loop.start() # Start the loop; stop it by setting _dmx_transfer to False
dmx_blank()
def send_all_color(dev,r,g,b,bright): cv = [0 for v in range(0, 512)] for x in range(0,31): cv[0+(x*8)] = r cv[1+(x*8)] = g cv[2+(x*8)] = b cv[6+(x*8)] = bright try: sent = dev.send_multi_value(1, cv) except: dev = pyudmx.uDMXDevice() dev.open()
def run_multicolor_test():
udmx = pyudmx.uDMXDevice()
res = udmx.open()
print("pyudmx open: ", res)
spectrometer = SpotReader()
print("spectrometer open")
t0 = time.time()
readings = []
udmx.send_multi_value(2, [20, 20, 20, 0, 0, 0])
res1 = spectrometer.read()
print("Sample ({})s: x/255. LUX: {} CCT: {}K CRI: {}".format(
int(time.time() - t0), res1['lux'], res1['cct'], res1['cri']))
readings.append(res1)
udmx.send_multi_value(2, [20, 20, 20, 20, 0, 0])
res1 = spectrometer.read()
print("Sample ({})s: x/255. LUX: {} CCT: {}K CRI: {}".format(
int(time.time() - t0), res1['lux'], res1['cct'], res1['cri']))
readings.append(res1)
udmx.send_multi_value(2, [20, 20, 20, 20, 0, 20])
res1 = spectrometer.read()
print("Sample ({})s: x/255. LUX: {} CCT: {}K CRI: {}".format(
int(time.time() - t0), res1['lux'], res1['cct'], res1['cri']))
readings.append(res1)
udmx.send_multi_value(2, [0, 0, 0, 0, 20, 0, 0])
res1 = spectrometer.read()
print("Sample ({})s: x/255. LUX: {} CCT: {}K CRI: {}".format(
int(time.time() - t0), res1['lux'], res1['cct'], res1['cri']))
readings.append(res1)
udmx.send_multi_value(2, [0, 0, 0, 0, 20, 20, 0])
res1 = spectrometer.read()
print("Sample ({})s: x/255. LUX: {} CCT: {}K CRI: {}".format(
int(time.time() - t0), res1['lux'], res1['cct'], res1['cri']))
readings.append(res1)
udmx.send_multi_value(2, [20, 20, 20, 20, 20, 0])
res1 = spectrometer.read()
print("Sample ({})s: x/255. LUX: {} CCT: {}K CRI: {}".format(
int(time.time() - t0), res1['lux'], res1['cct'], res1['cri']))
readings.append(res1)
udmx.send_multi_value(2, [40, 10, 40, 5, 5, 10])
with open('rgbwauv.json', 'w') as f:
f.write(json.dumps(readings))
def send_dmx_message(message_tokens):
"""
Send the DMX message defined by the command line arguments (message tokens).
The first argument/token is the DMX channel.
The remaining argument(s).token(s) are DMX values.
"""
# Open the uDMX USB device
dev = pyudmx.uDMXDevice()
if not dev.open():
print("Unable to find and open uDMX interface")
return False
# Translate the tokens into integers.
# trans_tokens[0] will be the one-based channel number (1-512) as an integer.
# The remaining tokens will be zero-based values (0-255) as integers.
trans_tokens = translate_message_tokens(message_tokens)
if len(trans_tokens) == 2:
# Single value message
if verbose:
print("Sending single value message channel:", trans_tokens[0],
"value:", trans_tokens[1])
n = dev.send_single_value(trans_tokens[0], trans_tokens[1])
if verbose:
print("Sent", n, "value")
else:
# Multi-value message
if verbose:
print("Sending multi-value message channel:", trans_tokens[0],
"values:", trans_tokens[1:])
n = dev.send_multi_value(trans_tokens[0], trans_tokens[1:])
if verbose:
print("Sent", n, "values")
# This may not be absolutely necessary, but it is safe.
# It's the closest thing to a close() method.
dev.close()
# Returns True if something was sent
return n > 0
def send_dmx_message(message_tokens):
"""
Send the DMX message defined by the command line arguments (message tokens).
The first argument/token is the DMX channel.
The remaining argument(s).token(s) are DMX values.
"""
# Open the uDMX USB device
dev = pyudmx.uDMXDevice()
if not dev.open():
print("Unable to find and open uDMX interface")
return False
# Translate the tokens into integers.
# trans_tokens[0] will be the one-based channel number (1-512) as an integer.
# The remaining tokens will be zero-based values (0-255) as integers.
trans_tokens = translate_message_tokens(message_tokens)
if len(trans_tokens) == 2:
# Single value message
if verbose:
print("Sending single value message channel:", trans_tokens[0], "value:", trans_tokens[1])
n = dev.send_single_value(trans_tokens[0], trans_tokens[1])
if verbose:
print("Sent", n, "value")
else:
# Multi-value message
if verbose:
print("Sending multi-value message channel:", trans_tokens[0], "values:", trans_tokens[1:])
n = dev.send_multi_value(trans_tokens[0], trans_tokens[1:])
if verbose:
print("Sent", n, "values")
# This may not be absolutely necessary, but it is safe.
# It's the closest thing to a close() method.
dev.close()
# Returns True if something was sent
return n > 0
def handle_dialog(res, req):
user_id = req['session']['user_id']
req['request']['original_utterance'] = req['request'][
'original_utterance'].replace('.', '')
req['request']['original_utterance'] = req['request'][
'original_utterance'].replace(',', '')
req['request']['original_utterance'] = numify(
req['request']['original_utterance'])
print(req['request']['original_utterance'])
if req['session']['new']:
UserInfo[user_id] = 0
res['response'][
'text'] = 'Приветсвую вас, это навык управления Осветительными DMX устройствами в МИЭМе. Чем я могу быть полезна?'
res['response']['buttons'] = get_suggests(0)
return
if UserInfo[user_id] == 0:
if req['request']['original_utterance'].lower() in [
'журнал посещений',
]:
f = open("/home/pi/Alisa_DMX/server/log_а.txt", "r")
journal = f.read()
journal = [i for i in journal.split('\n')]
journal = journal[-5:]
journal = '\n'.join(journal)
journal = "Последние 5 записей:\n" + journal
res['response']['text'] = journal
res['response']['buttons'] = get_suggests(1)
return
elif req['request']['original_utterance'].lower() in [
'список устройств',
'список подключенных устройств',
]:
num = 0
while os.path.exists(
"/home/pi/Alisa_DMX/DMX_Devices/Config/device_%d" %
(num + 1)):
num += 1
res['response']['text'] = "Найденой устройств: %d" % (int(num))
res['response']['buttons'] = get_suggests(3)
return
elif req['request']['original_utterance'].lower() in [
'прибор 1',
'прибор 2',
'прибор 3',
'прибор 4',
'прибор 5',
'прибор 6',
'прибор 7',
'прибор 8',
'прибор 9',
'прибор 10',
]:
name = req['request']['original_utterance'].lower()
if os.path.exists(
"/home/pi/Alisa_DMX/DMX_Devices/Config/device_%s" %
(name[-1:])):
res['response']['text'] = read_device1(int(name[-1:]))
res['response']['buttons'] = get_suggests(3)
else:
res['response']['text'] = "Устройство не найдено."
res['response']['buttons'] = get_suggests(3)
return
elif req['request']['original_utterance'].lower().find(
"мастер контроль") >= 0:
res['response'][
'text'] = "Для начала, я попрошу вас авторизироваться. Если у вас нет аккаунта, обратитесь к администратору. Введите свои почту/пароль в формате:\[email protected]|password"
return
elif req['request']['original_utterance'].lower() in [
'назад',
'',
]:
res['response']['text'] = 'Чем я могу быть полезна?'
res['response']['buttons'] = get_suggests(0)
return
elif req['request']['original_utterance'].lower().find(
"@miemhseru|") >= 0:
f = open("/home/pi/Alisa_DMX/server/log_pas.txt", "r")
line = f.readline()
while line:
if line == req['request']['original_utterance']:
UserInfo[user_id] = 1
num = 0
User_s[user_id] = []
User_val[user_id] = []
User_ch[user_id] = []
User_dev[user_id] = pyudmx.uDMXDevice()
User_dev[user_id].open()
while os.path.exists(
"/home/pi/Alisa_DMX/DMX_Devices/Config/device_%d" %
(num + 1)):
num += 1
for j in range(num):
s, val = scan(j + 1)
User_s[user_id].append(s)
User_val[user_id].append(val)
User_ch[user_id].append(len(val))
d = 0
for i in User_s[user_id]:
d += 1
res['response'][
'text'] = "Рада вас видеть снова!\nЗагружено устройств: %d\nКонфигурация завершена" % d
res['response']['buttons'] = get_suggests(1)
f.close()
subprocess.call("echo '%s %s %s %s' >> 'log_а.txt'" %
(time.strftime("%H:%M:%S"), date.today(),
user_id, line[:-5]),
shell=True,
cwd='/home/pi/Alisa_DMX/server/')
return
line = f.readline()
if UserInfo[user_id] == 0:
res['response'][
'text'] = "Простите, такого пользователя не обнаружено. Проверьте правильность ввода или обратитесь к администратору."
f.close()
return
else:
res['response'][
'text'] = "Команда не опознана или у вас не полномочий"
res['response']['buttons'] = get_suggests(1)
if UserInfo[user_id] == 1:
if req['request']['original_utterance'].lower() in [
'назад',
]:
res['response'][
'text'] = 'Чем я могу быть полезна? (Мастер контроль)'
res['response']['buttons'] = get_suggests(4)
return
elif req['request']['original_utterance'].lower() in [
'журнал посещений',
]:
f = open("/home/pi/Alisa_DMX/server/log_а.txt", "r")
journal = f.read()
journal = [i for i in journal.split('\n')]
journal = journal[-5:]
journal = '\n'.join(journal)
journal = "Последние 5 записей:\n" + journal
res['response']['text'] = journal
res['response']['buttons'] = get_suggests(1)
return
elif req['request']['original_utterance'].lower() in [
'журнал действий',
]:
f = open("/home/pi/Alisa_DMX/DMX_Devices/Config/log_online.txt",
"r")
journal = f.read()
journal = [i for i in journal.split('\n')]
journal = journal[-5:]
journal = '\n'.join(journal)
journal = "Последние 5 записей:\n" + journal
res['response']['text'] = journal
res['response']['buttons'] = get_suggests(1)
return
elif req['request']['original_utterance'].lower() in [
'список устройств',
'список подключенных устройств',
]:
num = 0
while os.path.exists(
"/home/pi/Alisa_DMX/DMX_Devices/Config/device_%d" %
(num + 1)):
num += 1
res['response']['text'] = "Найденой устройств: %d" % (int(num))
res['response']['buttons'] = get_suggests(3)
return
elif req['request']['original_utterance'].lower() in [
'прибор 1',
'прибор 2',
'прибор 3',
'прибор 4',
'прибор 5',
'прибор 6',
'прибор 7',
'прибор 8',
'прибор 9',
'прибор 10',
]:
name = req['request']['original_utterance'].lower()
if os.path.exists(
"/home/pi/Alisa_DMX/DMX_Devices/Config/device_%s" %
(name[-1:])):
res['response']['text'] = read_device1(int(name[-1:]))
res['response']['buttons'] = get_suggests(3)
else:
res['response']['text'] = "Устройство не найдено."
res['response']['buttons'] = get_suggests(3)
return
elif req['request']['original_utterance'].lower().find(
"все приборы") >= 0 and req['request'][
'original_utterance'].lower().find("проверка") >= 0:
subprocess.call("echo '%s %s %s' >> 'log_online.txt'" %
(time.strftime("%H:%M:%S"), date.today(),
req['request']['original_utterance']),
shell=True,
cwd='/home/pi/Alisa_DMX/DMX_Devices/Config')
check = 0
text = ''
flag = False
for i in range(len(User_s[user_id]) - 1):
check += User_ch[user_id][i] + User_s[user_id][i]
if User_s[user_id][i + 1] < check:
text += ("Конфликт приборов %d %d\n" % (i + 1, i + 2))
flag = True
check = 0
if flag:
text += "Переобозначьте стартовые каналы!"
else:
text += "Конфликтов не обнаружено."
res['response']['text'] = text
res['response']['buttons'] = get_suggests(1)
return
elif req['request']['original_utterance'].lower().find(
"все приборы") >= 0 and req['request'][
'original_utterance'].lower().find("конфигурация") >= 0:
subprocess.call("echo '%s %s %s' >> 'log_online.txt'" %
(time.strftime("%H:%M:%S"), date.today(),
req['request']['original_utterance']),
shell=True,
cwd='/home/pi/Alisa_DMX/DMX_Devices/Config')
User_s[user_id] = []
User_val[user_id] = []
User_ch[user_id] = []
num = 0
while os.path.exists(
"/home/pi/Alisa_DMX/DMX_Devices/Config/device_%d" %
(num + 1)):
num += 1
for j in range(num):
s, val = scan(j + 1)
User_s[user_id].append(s)
User_val[user_id].append(val)
User_ch[user_id].append(len(val))
res['response']['text'] = "Все каналы сброшены"
res['response']['buttons'] = get_suggests(1)
return
elif req['request']['original_utterance'].lower().find(
"стартовый канал") >= 0 and req['request'][
'original_utterance'].lower().find("прибор") >= 0:
if req['request']['original_utterance'].lower().find("инфо") >= 0:
subprocess.call("echo '%s %s %s' >> 'log_online.txt'" %
(time.strftime("%H:%M:%S"), date.today(),
req['request']['original_utterance']),
shell=True,
cwd='/home/pi/Alisa_DMX/DMX_Devices/Config')
resul = [
i for i in req['request']
['original_utterance'].lower().split() if i.isdigit()
]
resul = ''.join(resul)
resul = int(resul)
if resul >= 1 and resul <= len(User_s[user_id]) + 1:
ans, buf = scan(resul)
res['response']['text'] = "Стартовый канал прибора: %s" % (
str(ans))
res['response']['buttons'] = get_suggests(1)
return
else:
res['response']['text'] = "Прибор не найден"
res['response']['buttons'] = get_suggests(1)
return
elif req['request']['original_utterance'].lower().find(
"отправь") >= 0:
subprocess.call("echo '%s %s %s' >> 'log_online.txt'" %
(time.strftime("%H:%M:%S"), date.today(),
req['request']['original_utterance']),
shell=True,
cwd='/home/pi/Alisa_DMX/DMX_Devices/Config')
beg = req['request']['original_utterance'].lower().find(
"прибор")
mid = req['request']['original_utterance'].lower().find(
"канал")
res1 = req['request']['original_utterance'].lower()[beg:mid]
res2 = req['request']['original_utterance'].lower()[-8:]
res1 = [i for i in res1.split() if i.isdigit()]
res1 = ''.join(res1)
res1 = int(res1)
res2 = [i for i in res2.split() if i.isdigit()]
res2 = ''.join(res2)
res2 = int(res2)
if res1 >= 1 and res1 <= len(User_s[user_id]) + 1:
User_s[user_id][res1 - 1] = res2
res['response'][
'text'] = "Стартовый канал сменен на %d" % res2
res['response']['buttons'] = get_suggests(1)
return
else:
res['response']['text'] = "Прибор не найден"
res['response']['buttons'] = get_suggests(1)
return
elif req['request']['original_utterance'].lower().find(
"канал") >= 0 and req['request']['original_utterance'].lower(
).find("прибор") >= 0:
if req['request']['original_utterance'].lower().find("инфо") >= 0:
subprocess.call("echo '%s %s %s' >> 'log_online.txt'" %
(time.strftime("%H:%M:%S"), date.today(),
req['request']['original_utterance']),
shell=True,
cwd='/home/pi/Alisa_DMX/DMX_Devices/Config')
beg = req['request']['original_utterance'].find("прибор")
mid = req['request']['original_utterance'].find("канал")
end = req['request']['original_utterance'].find("инфо")
res1 = req['request']['original_utterance'][beg:mid]
res2 = req['request']['original_utterance'][mid:end]
res1 = [i for i in res1.split() if i.isdigit()]
res1 = ''.join(res1)
res1 = int(res1)
res2 = [i for i in res2.split() if i.isdigit()]
res2 = ''.join(res2)
res2 = int(res2)
if res1 >= 1 and res1 <= len(
User_s[user_id]) + 1 and res2 >= 1:
res['response']['text'] = find_ch_n(res1, res2)
res['response']['buttons'] = get_suggests(1)
return
else:
res['response']['text'] = "Канал или устройство не найдены"
res['response']['buttons'] = get_suggests(1)
return
elif req['request']['original_utterance'].lower().find(
"отправь") >= 0:
subprocess.call("echo '%s %s %s' >> 'log_online.txt'" %
(time.strftime("%H:%M:%S"), date.today(),
req['request']['original_utterance']),
shell=True,
cwd='/home/pi/Alisa_DMX/DMX_Devices/Config')
beg = req['request']['original_utterance'].lower().find(
"прибор")
mid = req['request']['original_utterance'].lower().find(
"канал")
end = req['request']['original_utterance'].lower().find(
"отправь")
res1 = req['request']['original_utterance'][beg:mid]
res2 = req['request']['original_utterance'][mid:end]
res3 = req['request']['original_utterance'].lower()[-8:]
res1 = [i for i in res1.split() if i.isdigit()]
res1 = ''.join(res1)
res1 = int(res1)
res2 = [i for i in res2.split() if i.isdigit()]
res2 = ''.join(res2)
res2 = int(res2)
res3 = [i for i in res3.split() if i.isdigit()]
res3 = ''.join(res3)
res3 = int(res3)
if res3 >= 0 and res3 <= 255:
if res1 >= 1 and res1 <= len(User_s[user_id]) + 1:
if res2 >= 0 and res2 <= len(User_ch[user_id]):
print(User_s[user_id][res1 - 1] + res2 - 1, res3)
print(User_s[user_id][res1 - 1] + res2 - 1, res3)
User_dev[user_id].send_single_value(
User_s[user_id][res1 - 1] + res2 - 1, res3)
res['response']['text'] = 'Сигнал отправлен'
res['response']['buttons'] = get_suggests(1)
return
else:
res['response']['text'] = 'Канал не найден'
res['response']['buttons'] = get_suggests(1)
return
else:
res['response']['text'] = "Устройство не найдено"
res['response']['buttons'] = get_suggests(1)
return
else:
res['response']['text'] = "Некорректное значение"
res['response']['buttons'] = get_suggests(1)
return
elif req['request']['original_utterance'].lower().find(
"закончить") >= 0:
UserInfo[user_id] = 0
res['response']['text'] = "Заканчиваю работу мастер-контроль"
res['response']['buttons'] = get_suggests(1)
User_dev[user_id].close()
return
else:
res['response']['text'] = "Команда не опознана"
res['response']['buttons'] = get_suggests(1)
return
def __init__(self, *args, **kwargs):
self.udmx = pyudmx.uDMXDevice()
self.udmx.open()
super().__init__(*args, **kwargs)
res2 = line[mid:end]
res3 = line[-8:]
res1 = [i for i in res1.split() if i.isdigit()]
res1 = ''.join(res1)
res1 = int(res1)
res2 = [i for i in res2.split() if i.isdigit()]
res2 = ''.join(res2)
res2 = int(res2)
res3 = [i for i in res3.split() if i.isdigit()]
res3 = ''.join(res3)
res3 = int(res3)
print(res1,res2,res3)
if res3 >= 0 and res3 <=255:
if res1 >= 1 and res1 <= len(l_s)+1:
if res2 >=0 and res2 <=len(l_ch):
DMX = pyudmx.uDMXDevice()
DMX.open()
DMX.send_single_value(l_s[res1-1]+res2-1, res3)
DMX.close()
#l_val[res-1][res2]=res3
else:
print("Канал не найден")
else:
print("Устройство не найдено")
else:
print("Некорректное значение")
elif line.find("конфигурация")>=0 and line.find("прибор")>=0:
print(line)
subprocess.call("echo '%s %s %s' >> 'log.txt'" % (time.strftime("%H:%M:%S"),date.today(),line[:-1]), shell=True,cwd='/home/pi/Alisa_DMX/DMX_Devices/Config')
res = [i for i in line.split() if i.isdigit()]
def __init__(self):
self.dmx = pyudmx.uDMXDevice()
self.dmx.open()
if __name__ == "__main__":
import time
import pigpio
from pyudmx import pyudmx
pg.init()
pos = [0,0,0]
dmx = [2, 3, 4]
dev = None
pi = pigpio.pi()
dev = pyudmx.uDMXDevice()
if not dev.open():
raise "Unable to find and open uDMX interface"
for ch in [1, 2, 3, 4,8]:
dev.send_single_value(ch, 255)
done = False
while not done:
for event in pg.event.get():
if event.type == pg.QUIT:
done = True
break
print(event)
encoder.cancel()
