def init_solver(self):
logger.info("### Init Diode Solver Setup ###")
if self.DIRECT_SOLVER:
if self.dim == 1:
raise NotImplementedError(
"Direct 1D solving is not yet implemented in mewarpx")
# self.solver = poisson1d.PoissonSolver1D()
elif self.dim == 2:
if self.rz:
raise NotImplementedError(
"Direct RZ solving is not yet implemented in mewarpx")
self.solver = poisson_solvers.PoissonSolverPseudo1D(
grid=mwxrun.grid
)
else:
self.solver = picmi.ElectrostaticSolver(
grid=mwxrun.grid,
method='Multigrid',
required_precision=1e-6,
maximum_iterations=10000
)
self.solver.self_fields_verbosity = 2 if self.NONINTERAC else 0
number_of_cells = [nx, ny],
lower_bound = [xmin, ymin],
upper_bound = [xmax, ymax],
bc_xmin = 'dirichlet',
bc_xmax = 'dirichlet',
bc_ymin = 'periodic',
bc_ymax = 'periodic',
warpx_potential_hi_x = "%.1f*sin(2*pi*%.5e*t)" % (VOLTAGE, FREQ),
lower_boundary_conditions_particles=['absorbing', 'periodic'],
upper_boundary_conditions_particles=['absorbing', 'periodic'],
moving_window_velocity = None,
warpx_max_grid_size = nx//4
)
solver = picmi.ElectrostaticSolver(
grid=grid, method='Multigrid', required_precision=1e-6
)
##########################
# diagnostics
##########################
field_diag = picmi.FieldDiagnostic(
name = 'diag1',
grid = grid,
period = diagnostic_intervals,
data_list = ['rho_electrons', 'rho_he_ions', 'phi'],
write_dir = '.',
warpx_file_prefix = 'Python_background_mcc_plt'
)
##########################
grid = picmi.Cartesian2DGrid(
number_of_cells = [nx, ny],
lower_bound = [xmin, ymin],
upper_bound = [xmax, ymax],
lower_boundary_conditions = ['dirichlet', 'periodic'],
upper_boundary_conditions = ['dirichlet', 'periodic'],
lower_boundary_conditions_particles = ['absorbing', 'periodic'],
upper_boundary_conditions_particles = ['absorbing', 'periodic'],
moving_window_velocity = None,
warpx_max_grid_size = 32
)
solver = picmi.ElectrostaticSolver(
grid=grid, method='Multigrid', required_precision=1e-6,
warpx_self_fields_verbosity=0
)
##########################
# physics components
##########################
electrons = picmi.Species(
particle_type='electron', name='electrons'
)
##########################
# diagnostics
##########################
field_diag = picmi.FieldDiagnostic(
def setup_run(self):
"""Setup simulation components."""
#######################################################################
# Set geometry and boundary conditions #
#######################################################################
self.grid = picmi.Cartesian1DGrid(
number_of_cells=[self.nz],
warpx_max_grid_size=128,
lower_bound=[0],
upper_bound=[self.gap],
lower_boundary_conditions=['dirichlet'],
upper_boundary_conditions=['dirichlet'],
lower_boundary_conditions_particles=['absorbing'],
upper_boundary_conditions_particles=['absorbing'],
warpx_potential_hi_z=self.voltage,
)
#######################################################################
# Field solver #
#######################################################################
self.solver = picmi.ElectrostaticSolver(grid=self.grid,
method='Multigrid',
required_precision=1e-12,
warpx_self_fields_verbosity=0)
#######################################################################
# Particle types setup #
#######################################################################
self.electrons = picmi.Species(
particle_type='electron',
name='electrons',
initial_distribution=picmi.UniformDistribution(
density=self.plasma_density,
rms_velocity=[
np.sqrt(constants.kb * self.elec_temp / constants.m_e)
] * 3,
))
self.ions = picmi.Species(
particle_type='He',
name='he_ions',
charge='q_e',
mass=self.m_ion,
initial_distribution=picmi.UniformDistribution(
density=self.plasma_density,
rms_velocity=[
np.sqrt(constants.kb * self.gas_temp / self.m_ion)
] * 3,
))
#######################################################################
# Collision initialization #
#######################################################################
cross_sec_direc = '../../../../warpx-data/MCC_cross_sections/He/'
mcc_electrons = picmi.MCCCollisions(
name='coll_elec',
species=self.electrons,
background_density=self.gas_density,
background_temperature=self.gas_temp,
background_mass=self.ions.mass,
scattering_processes={
'elastic': {
'cross_section':
cross_sec_direc + 'electron_scattering.dat'
},
'excitation1': {
'cross_section': cross_sec_direc + 'excitation_1.dat',
'energy': 19.82
},
'excitation2': {
'cross_section': cross_sec_direc + 'excitation_2.dat',
'energy': 20.61
},
'ionization': {
'cross_section': cross_sec_direc + 'ionization.dat',
'energy': 24.55,
'species': self.ions
},
})
mcc_ions = picmi.MCCCollisions(
name='coll_ion',
species=self.ions,
background_density=self.gas_density,
background_temperature=self.gas_temp,
scattering_processes={
'elastic': {
'cross_section': cross_sec_direc + 'ion_scattering.dat'
},
'back': {
'cross_section': cross_sec_direc + 'ion_back_scatter.dat'
},
# 'charge_exchange' : {
# 'cross_section' : cross_sec_direc+'charge_exchange.dat'
# }
})
#######################################################################
# Initialize simulation #
#######################################################################
self.sim = picmi.Simulation(
solver=self.solver,
time_step_size=self.dt,
max_steps=self.max_steps,
warpx_collisions=[mcc_electrons, mcc_ions],
warpx_load_balance_intervals=self.max_steps // 5000,
verbose=self.test)
self.sim.add_species(self.electrons,
layout=picmi.GriddedLayout(
n_macroparticle_per_cell=[self.seed_nppc],
grid=self.grid))
self.sim.add_species(self.ions,
layout=picmi.GriddedLayout(
n_macroparticle_per_cell=[self.seed_nppc],
grid=self.grid))
#######################################################################
# Add diagnostics for the CI test to be happy #
#######################################################################
field_diag = picmi.FieldDiagnostic(
name='diag1',
grid=self.grid,
period=0,
data_list=['rho_electrons', 'rho_he_ions'],
write_dir='.',
warpx_file_prefix='Python_background_mcc_1d_plt')
self.sim.add_diagnostic(field_diag)
def setup_run(self):
self.rmax = 1e-3
self.rmin = self.rmax - self.D_CA - self.USE_EB * 10e-6
self.zmax = (self.rmax - self.rmin) / self.NR * self.NZ / 2.0
self.zmin = -self.zmax
self.V_ANODE = self.V_CATHODE + self.V_ANODE_CATHODE
if self.DIAG_STEPS is None:
self.DIAG_STEPS = ((self.TOTAL_TIMESTEPS //
5) if self.TOTAL_TIMESTEPS > 10 else
self.TOTAL_TIMESTEPS)
#######################################################################
# Set geometry, boundary conditions and timestep #
#######################################################################
mwxrun.init_grid(
lower_bound=[self.rmin, self.zmin],
upper_bound=[self.rmax, self.zmax],
number_of_cells=[self.NR, self.NZ], # min_tiles=1,
use_rz=True,
bc_fields_z_min='periodic',
bc_fields_z_max='periodic',
bc_particles_z_min='periodic',
bc_particles_z_max='periodic',
bc_fields_r_min='dirichlet',
bc_fields_r_max='dirichlet',
)
mwxrun.init_timestep(DT=self.DT)
mwxrun.simulation.max_steps = self.TOTAL_TIMESTEPS
mwxrun.simulation.load_balance_intervals = self.TOTAL_TIMESTEPS // 5000
#######################################################################
# Field solver #
#######################################################################
self.solver = picmi.ElectrostaticSolver(grid=mwxrun.grid,
method='Multigrid',
required_precision=1e-6,
warpx_self_fields_verbosity=0,
maximum_iterations=1000)
mwxrun.simulation.solver = self.solver
#######################################################################
# Conductors setup and installation #
#######################################################################
self.cathode = assemblies.CylinderZ(V=self.V_CATHODE,
T=self.CATHODE_TEMP,
WF=self.CATHODE_PHI,
name='cathode',
r_outer=self.rmax + 1e-6,
r_inner=self.rmax)
self.anode = assemblies.CylinderZ(
V=self.V_ANODE,
T=self.ANODE_TEMP,
WF=self.ANODE_PHI,
name='anode',
r_outer=(self.rmin if not self.USE_EB else self.rmax - self.D_CA))
#######################################################################
# Particle types setup #
#######################################################################
self.electrons = mespecies.Species(particle_type='electron',
name='electrons')
#######################################################################
# Scraper setup #
#######################################################################
for species in [self.electrons]:
species.save_particles_at_xhi = 1
if self.USE_EB:
species.save_particles_at_eb = 1
else:
species.save_particles_at_xlo = 1
#######################################################################
# Thermionic emission #
#######################################################################
self.cathode_emitter = emission.ZCylinderEmitter(
conductor=self.cathode, rdir=-1)
self.cathode_injector = emission.ThermionicInjector(
emitter=self.cathode_emitter,
species=self.electrons,
A=self.CATHODE_A,
npart_per_cellstep=self.NPPC,
use_Schottky=self.USE_SCHOTTKY)
#######################################################################
# Clean up and output RunInfo #
#######################################################################
runvars = CylinderVacuumTEC.__dict__.copy()
runvars.update(self.__dict__)
self.runinfo = runinfo.RunInfo(
local_vars=runvars,
electrode_params={
"CATHODE_A": self.CATHODE_A,
"CATHODE_TEMP": self.CATHODE_TEMP,
"CATHODE_PHI": self.CATHODE_PHI,
"ANODE_PHI": self.ANODE_PHI
},
surface_dict={
'cathode': self.cathode,
'anode': self.anode
},
injector_dict={'cathode': self.cathode_injector},
)
# overwrite runinfo area to properly normalize currents
self.runinfo.area = self.cathode_emitter.area
#######################################################################
# Add diagnostics #
#######################################################################
self.text_diag = diags.TextDiag(diag_steps=self.DIAG_STEPS,
preset_string='perfdebug')
# self.field_diag = diags.FieldDiagnostic(
# diag_steps=self.DIAG_STEPS, style='roelof', save_pdf=False
# )
self.fluxdiag = diags.FluxDiagnostic(diag_steps=self.DIAG_STEPS,
runinfo=self.runinfo,
check_charge_conservation=False,
overwrite=True)
#######################################################################
# Initialize run and print diagnostic info #
#######################################################################
mwxrun.init_run()
