def main():
# Create a ZEDCamera object
zed = sl.Camera()
# Create a InitParameters object and set configuration parameters
init_params = sl.InitParameters()
init_params.camera_resolution = sl.RESOLUTION.RESOLUTION_HD720 # Use HD720 video mode (default fps: 60)
# Use a right-handed Y-up coordinate system
init_params.coordinate_system = sl.COORDINATE_SYSTEM.COORDINATE_SYSTEM_RIGHT_HANDED_Y_UP
init_params.coordinate_units = sl.UNIT.UNIT_METER # Set units in meters
# Open the camera
err = zed.open(init_params)
if err != sl.ERROR_CODE.SUCCESS:
exit(1)
# Enable positional tracking with default parameters.
# Positional tracking needs to be enabled before using spatial mapping
py_transform = sl.Transform()
tracking_parameters = sl.TrackingParameters(init_pos=py_transform)
err = zed.enable_tracking(tracking_parameters)
if err != sl.ERROR_CODE.SUCCESS:
exit(1)
# Enable spatial mapping
mapping_parameters = sl.SpatialMappingParameters()
err = zed.enable_spatial_mapping(mapping_parameters)
if err != sl.ERROR_CODE.SUCCESS:
exit(1)
# Grab data during 500 frames
i = 0
py_mesh = sl.Mesh() # Create a Mesh object
runtime_parameters = sl.RuntimeParameters()
while i < 500:
# For each new grab, mesh data is updated
if zed.grab(runtime_parameters) == sl.ERROR_CODE.SUCCESS:
# In the background, spatial mapping will use newly retrieved images, depth and pose to update the mesh
mapping_state = zed.get_spatial_mapping_state()
print("\rImages captured: {0} / 500 || {1}".format(i, mapping_state))
i = i + 1
print("\n")
# Extract, filter and save the mesh in an obj file
print("Extracting Mesh...\n")
zed.extract_whole_mesh(py_mesh)
print("Filtering Mesh...\n")
py_mesh.filter(sl.MeshFilterParameters()) # Filter the mesh (remove unnecessary vertices and faces)
print("Saving Mesh...\n")
py_mesh.save("mesh.obj")
# Disable tracking and mapping and close the camera
zed.disable_spatial_mapping()
zed.disable_tracking()
zed.close()
def main():
#if len(sys.argv) != 2:
# print("Please specify path to .svo file.")
# exit()
#filepath = sys.argv[1]
#print("Reading SVO file: {0}".format(filepath))
cam = sl.Camera()
#init = sl.InitParameters(svo_input_filename=filepath)
init = sl.InitParameters()
#new
init.camera_resolution = sl.RESOLUTION.RESOLUTION_HD720 # Use HD720 video mode (default
# Use a right-handed Y-up coordinate system
init.coordinate_system = sl.COORDINATE_SYSTEM.COORDINATE_SYSTEM_RIGHT_HANDED_Y_UP
init.coordinate_units = sl.UNIT.UNIT_METER # Set units in meters
status = cam.open(init)
if status != sl.ERROR_CODE.SUCCESS:
print(repr(status))
exit()
runtime = sl.RuntimeParameters()
spatial = sl.SpatialMappingParameters()
transform = sl.Transform()
tracking = sl.TrackingParameters(transform)
cam.enable_tracking(tracking)
cam.enable_spatial_mapping(spatial)
pymesh = sl.Mesh()
print("Processing...")
#for i in range(200):
while True:
try:
cam.grab(runtime)
cam.request_mesh_async()
except KeyboardInterrupt:
cam.extract_whole_mesh(pymesh)
cam.disable_tracking()
cam.disable_spatial_mapping()
filter_params = sl.MeshFilterParameters()
filter_params.set(sl.MESH_FILTER.MESH_FILTER_HIGH)
print("Filtering params : {0}.".format(
pymesh.filter(filter_params)))
apply_texture = pymesh.apply_texture(
sl.MESH_TEXTURE_FORMAT.MESH_TEXTURE_RGBA)
print("Applying texture : {0}.".format(apply_texture))
print_mesh_information(pymesh, apply_texture)
save_filter(filter_params)
save_mesh(pymesh)
cam.close()
print("\nFINISH")
raise
def main():
if len(sys.argv) != 2:
print("Please specify path to .svo file.")
exit()
filepath = sys.argv[1]
print("Reading SVO file: {0}".format(filepath))
cam = sl.Camera()
input_type = sl.InputType()
input_type.set_from_svo_file(filepath)
init = sl.InitParameters()
init.input = input_type
status = cam.open(init)
if status != sl.ERROR_CODE.SUCCESS:
print(repr(status))
exit()
runtime = sl.RuntimeParameters()
spatial = sl.SpatialMappingParameters()
transform = sl.Transform()
tracking = sl.PositionalTrackingParameters(transform)
cam.enable_positional_tracking(tracking)
cam.enable_spatial_mapping(spatial)
pymesh = sl.Mesh()
print("Processing...")
for i in range(200):
cam.grab(runtime)
cam.request_spatial_map_async()
cam.extract_whole_spatial_map(pymesh)
cam.disable_positional_tracking()
cam.disable_spatial_mapping()
filter_params = sl.MeshFilterParameters()
filter_params.set(sl.MESH_FILTER.HIGH)
print("Filtering params : {0}.".format(pymesh.filter(filter_params)))
apply_texture = pymesh.apply_texture(sl.MESH_TEXTURE_FORMAT.RGBA)
print("Applying texture : {0}.".format(apply_texture))
print_mesh_information(pymesh, apply_texture)
save_filter(filter_params)
save_mesh(pymesh)
cam.close()
print("\nFINISH")
def test():
zed = sl.Camera()
init_params = sl.InitParameters()
init_params.camera_resolution = sl.RESOLUTION.RESOLUTION_HD720 # Use HD720 video mode (default fps: 60)
init_params.coordinate_system = sl.COORDINATE_SYSTEM.COORDINATE_SYSTEM_RIGHT_HANDED_Y_UP # Use a right-handed Y-up coordinate system
init_params.coordinate_units = sl.UNIT.UNIT_METER # Set units in meters
zed.open(init_params)
# Configure spatial mapping parameters
mapping_parameters = sl.SpatialMappingParameters(
sl.MAPPING_RESOLUTION.MAPPING_RESOLUTION_LOW,
sl.MAPPING_RANGE.MAPPING_RANGE_FAR)
mapping_parameters.map_type = sl.SPATIAL_MAP_TYPE.SPATIAL_MAP_TYPE_MESH
mapping_parameters.save_texture = True
filter_params = sl.MeshFilterParameters(
) # not available for fused point cloud
filter_params.set(
sl.MESH_FILTER.MESH_FILTER_LOW) # not available for fused point cloud
# Enable tracking and mapping
py_transform = sl.Transform()
tracking_parameters = sl.TrackingParameters(init_pos=py_transform)
zed.enable_tracking(tracking_parameters)
zed.enable_spatial_mapping(mapping_parameters)
mesh = sl.Mesh() # Create a mesh object
timer = 0
runtime_parameters = sl.RuntimeParameters()
print("Getting Frames...")
# Grab 500 frames and stop
while timer < 500:
if zed.grab(runtime_parameters) == sl.ERROR_CODE.SUCCESS:
# When grab() = SUCCESS, a new image, depth and pose is available.
# Spatial mapping automatically ingests the new data to build the mesh.
timer += 1
print("Saving...")
# Retrieve the spatial map
zed.extract_whole_spatial_map(mesh)
# Filter the mesh
mesh.filter(filter_params) # not available for fused point cloud
# Apply the texture
mesh.apply_texture() # not available for fused point cloud
# Save the mesh in .obj format
mesh.save("mesh.obj")
print("Done")
def __init__(self):
self.maps = list()
#self.map = []
self.mesh = sl.Mesh()
print("Finding ZED...")
self.zed = sl.Camera()
self.translation = [0, 0, 0]
self.orientation = [0, 0, 0, 0]
self.init_params = sl.InitParameters()
py_transform = sl.Transform()
trackparms = sl.TrackingParameters(init_pos=py_transform)
trackparms.enable_pose_smoothing = True
self.tracking_params = trackparms
self.mapping_params = sl.SpatialMappingParameters(
resolution=sl.MAPPING_RESOLUTION.MAPPING_RESOLUTION_LOW,
mapping_range=sl.MAPPING_RANGE.MAPPING_RANGE_FAR,
save_texture=True)
self.filter_params = sl.MeshFilterParameters()
self.runtime_params = sl.RuntimeParameters()
print("Starting ZED...")
self.start_camera()
self.update_pose()
self.has_requested_map = False
self.last_update_time = time.time()
# Grab data during 3000 frames
i = 0
py_mesh = sl.Mesh() # Create a Mesh object
runtime_parameters = sl.RuntimeParameters()
while i < 3000:
if zed.grab(runtime_parameters) == sl.ERROR_CODE.SUCCESS:
# In background, spatial mapping will use new images, depth and pose to create and update the mesh. No specific functions are required here.
mapping_state = zed.get_spatial_mapping_state()
# Print spatial mapping state
print("\rImages captured: {0} / 3000 || {1}".format(i, mapping_state))
i = i + 1
err = zed.extract_whole_spatial_map(py_mesh) # Extract the whole mesh
filter_params = sl.MeshFilterParameters()
filter_params.set(sl.MESH_FILTER.LOW)
py_mesh.filter(filter_params) # Filter the mesh (remove unnecessary vertices and faces)
py_mesh.save("mesh.obj") # Save the mesh in an obj file
# Disable tracking and mapping and close the camera
zed.disable_spatial_mapping()
zed.disable_positional_tracking()
zed.close()
def main():
if not sys.argv or len(sys.argv) != 2:
print(
"Only the path of the output SVO file should be passed as argument."
)
exit(1)
cam = sl.Camera()
init = sl.InitParameters()
init.camera_resolution = sl.RESOLUTION.RESOLUTION_HD720 # Use HD720 video mode (default
init.coordinate_system = sl.COORDINATE_SYSTEM.COORDINATE_SYSTEM_RIGHT_HANDED_Y_UP # Use a right-handed Y-up coordinate system
init.coordinate_units = sl.UNIT.UNIT_METER # Set units in meters
# new for SVO
init.depth_mode = sl.DEPTH_MODE.DEPTH_MODE_NONE
##
status = cam.open(init)
if status != sl.ERROR_CODE.SUCCESS:
print(repr(status))
exit()
runtime = sl.RuntimeParameters()
spatial = sl.SpatialMappingParameters()
transform = sl.Transform()
tracking = sl.TrackingParameters(transform)
cam.enable_tracking(tracking)
cam.enable_spatial_mapping(spatial)
#from Positional Tracking:
# Track the camera position until Keyboard Interupt (ctrl-C)
zed_pose = sl.Pose()
zed_imu = sl.IMUData()
runtime_parameters = sl.RuntimeParameters()
path = '/media/nvidia/SD1/translation.csv'
position_file = open(path, 'w')
#END from positional tracking
pymesh = sl.Mesh()
print("Processing...")
#new for SVO
path_output = sys.argv[1]
err = cam.enable_recording(
path_output, sl.SVO_COMPRESSION_MODE.SVO_COMPRESSION_MODE_AVCHD)
if err != sl.ERROR_CODE.SUCCESS:
print(repr(status))
exit(1)
print("SVO is Recording, use Ctrl-C to stop.")
frames_recorded = 0
##
while True:
try:
cam.grab(runtime)
# new for SVO
state = cam.record()
if state["status"]:
frames_recorded += 1
print("Frame count: " + str(frames_recorded), end="\r")
##
cam.request_mesh_async()
# Get the pose of the left eye of the camera with reference to the world frame
cam.get_position(zed_pose,
sl.REFERENCE_FRAME.REFERENCE_FRAME_WORLD)
cam.get_imu_data(zed_imu, sl.TIME_REFERENCE.TIME_REFERENCE_IMAGE)
# Display the translation and timestamp
py_translation = sl.Translation()
tx = round(zed_pose.get_translation(py_translation).get()[0], 3)
ty = round(zed_pose.get_translation(py_translation).get()[1], 3)
tz = round(zed_pose.get_translation(py_translation).get()[2], 3)
position_file.write("{0},{1},{2},{3}\n".format(
tx, ty, tz, zed_pose.timestamp))
except KeyboardInterrupt:
cam.extract_whole_mesh(pymesh)
cam.disable_tracking()
cam.disable_spatial_mapping()
# new for .svo
cam.disable_recording()
##
filter_params = sl.MeshFilterParameters()
filter_params.set(sl.MESH_FILTER.MESH_FILTER_HIGH)
print("Filtering params : {0}.".format(
pymesh.filter(filter_params)))
apply_texture = pymesh.apply_texture(
sl.MESH_TEXTURE_FORMAT.MESH_TEXTURE_RGBA)
print("Applying texture : {0}.".format(apply_texture))
print_mesh_information(pymesh, apply_texture)
save_filter(filter_params)
save_mesh(pymesh)
cam.close()
position_file.close()
save_position(path)
print("\nFINISH")
raise
def main():
#if len(sys.argv) != 2:
# print("Please specify path to .svo file.")
# exit()
#filepath = sys.argv[1]
#print("Reading SVO file: {0}".format(filepath))
cam = sl.Camera()
#init = sl.InitParameters(svo_input_filename=filepath)
init = sl.InitParameters()
#new
init.camera_resolution = sl.RESOLUTION.RESOLUTION_HD720 # Use HD720 video mode (default
# Use a right-handed Y-up coordinate system
init.coordinate_system = sl.COORDINATE_SYSTEM.COORDINATE_SYSTEM_RIGHT_HANDED_Y_UP
init.coordinate_units = sl.UNIT.UNIT_METER # Set units in meters
status = cam.open(init)
if status != sl.ERROR_CODE.SUCCESS:
print(repr(status))
exit()
runtime = sl.RuntimeParameters()
spatial = sl.SpatialMappingParameters()
transform = sl.Transform()
tracking = sl.TrackingParameters(transform)
cam.enable_tracking(tracking)
cam.enable_spatial_mapping(spatial)
#from Positional Tracking:
# Track the camera position until Keyboard Interupt (ctrl-C)
#i = 0
zed_pose = sl.Pose()
zed_imu = sl.IMUData()
runtime_parameters = sl.RuntimeParameters()
path = '/media/nvidia/SD1/translation.csv'
position_file = open(path, 'w')
#END from positional tracking
pymesh = sl.Mesh()
print("Processing...")
#for i in range(200):
while True:
try:
cam.grab(runtime)
cam.request_mesh_async()
# Get the pose of the left eye of the camera with reference to the world frame
cam.get_position(zed_pose,
sl.REFERENCE_FRAME.REFERENCE_FRAME_WORLD)
cam.get_imu_data(zed_imu, sl.TIME_REFERENCE.TIME_REFERENCE_IMAGE)
# Display the translation and timestamp
py_translation = sl.Translation()
tx = round(zed_pose.get_translation(py_translation).get()[0], 3)
ty = round(zed_pose.get_translation(py_translation).get()[1], 3)
tz = round(zed_pose.get_translation(py_translation).get()[2], 3)
#position_file.write("Translation: Tx: {0}, Ty: {1}, Tz {2}, Timestamp: {3}\n".format(tx, ty, tz, zed_pose.timestamp))
position_file.write("{0},{1},{2},{3}\n".format(
tx, ty, tz, zed_pose.timestamp))
except KeyboardInterrupt:
cam.extract_whole_mesh(pymesh)
cam.disable_tracking()
cam.disable_spatial_mapping()
filter_params = sl.MeshFilterParameters()
filter_params.set(sl.MESH_FILTER.MESH_FILTER_HIGH)
print("Filtering params : {0}.".format(
pymesh.filter(filter_params)))
apply_texture = pymesh.apply_texture(
sl.MESH_TEXTURE_FORMAT.MESH_TEXTURE_RGBA)
print("Applying texture : {0}.".format(apply_texture))
#print_mesh_information(pymesh, apply_texture)
#save_filter(filter_params)
#save_mesh(pymesh)
cam.close()
position_file.close()
#save_position(path)
save_all(filter_params, pymesh, path)
print("\nFINISH")
raise
def main():
print("Running Spatial Mapping sample ... Press 'q' to quit")
# Create a Camera object
zed = sl.Camera()
# Create a InitParameters object and set configuration parameters
init_params = sl.InitParameters()
init_params.camera_resolution = sl.RESOLUTION.HD720 # Use HD720 video mode
init_params.coordinate_units = sl.UNIT.METER # Set coordinate units
init_params.coordinate_system = sl.COORDINATE_SYSTEM.RIGHT_HANDED_Y_UP # OpenGL coordinates
# If applicable, use the SVO given as parameter
# Otherwise use ZED live stream
if len(sys.argv) == 2:
filepath = sys.argv[1]
print("Using SVO file: {0}".format(filepath))
init_params.set_from_svo_file(filepath)
# Open the camera
status = zed.open(init_params)
if status != sl.ERROR_CODE.SUCCESS:
print(repr(status))
exit()
# Get camera parameters
camera_parameters = zed.get_camera_information(
).camera_configuration.calibration_parameters.left_cam
pymesh = sl.Mesh() # Current incremental mesh
image = sl.Mat() # Left image from camera
pose = sl.Pose() # Camera pose tracking data
viewer = gl.GLViewer()
viewer.init(camera_parameters, pymesh)
spatial_mapping_parameters = sl.SpatialMappingParameters()
tracking_state = sl.POSITIONAL_TRACKING_STATE.OFF
mapping_state = sl.SPATIAL_MAPPING_STATE.NOT_ENABLED
mapping_activated = False
last_call = time.time() # Timestamp of last mesh request
# Enable positional tracking
err = zed.enable_positional_tracking()
if err != sl.ERROR_CODE.SUCCESS:
print(repr(err))
exit()
# Set runtime parameters
runtime = sl.RuntimeParameters()
while viewer.is_available():
# Grab an image, a RuntimeParameters object must be given to grab()
if zed.grab(runtime) == sl.ERROR_CODE.SUCCESS:
# Retrieve left image
zed.retrieve_image(image, sl.VIEW.LEFT)
# Update pose data (used for projection of the mesh over the current image)
tracking_state = zed.get_position(pose)
if mapping_activated:
mapping_state = zed.get_spatial_mapping_state()
# Compute elapsed time since the last call of Camera.request_spatial_map_async()
duration = time.time() - last_call
# Ask for a mesh update if 500ms elapsed since last request
if (duration > .5 and viewer.chunks_updated()):
zed.request_spatial_map_async()
last_call = time.time()
if zed.get_spatial_map_request_status_async(
) == sl.ERROR_CODE.SUCCESS:
zed.retrieve_spatial_map_async(pymesh)
viewer.update_chunks()
change_state = viewer.update_view(image, pose.pose_data(),
tracking_state, mapping_state)
if change_state:
if not mapping_activated:
init_pose = sl.Transform()
zed.reset_positional_tracking(init_pose)
# Configure spatial mapping parameters
spatial_mapping_parameters.resolution_meter = sl.SpatialMappingParameters(
).get_resolution_preset(sl.MAPPING_RESOLUTION.MEDIUM)
spatial_mapping_parameters.use_chunk_only = True
spatial_mapping_parameters.save_texture = False # Set to True to apply texture over the created mesh
spatial_mapping_parameters.map_type = sl.SPATIAL_MAP_TYPE.MESH
# Enable spatial mapping
zed.enable_spatial_mapping()
# Clear previous mesh data
pymesh.clear()
viewer.clear_current_mesh()
# Start timer
last_call = time.time()
mapping_activated = True
else:
# Extract whole mesh
zed.extract_whole_spatial_map(pymesh)
filter_params = sl.MeshFilterParameters()
filter_params.set(sl.MESH_FILTER.MEDIUM)
# Filter the extracted mesh
pymesh.filter(filter_params, True)
viewer.clear_current_mesh()
# If textures have been saved during spatial mapping, apply them to the mesh
if (spatial_mapping_parameters.save_texture):
print("Save texture set to : {}".format(
spatial_mapping_parameters.save_texture))
pymesh.apply_texture(sl.MESH_TEXTURE_FORMAT.RGBA)
# Save mesh as an obj file
filepath = "mesh_gen.obj"
status = pymesh.save(filepath)
if status:
print("Mesh saved under " + filepath)
else:
print("Failed to save the mesh under " + filepath)
mapping_state = sl.SPATIAL_MAPPING_STATE.NOT_ENABLED
mapping_activated = False
image.free(memory_type=sl.MEM.CPU)
pymesh.clear()
# Disable modules and close camera
zed.disable_spatial_mapping()
zed.disable_positional_tracking()
zed.close()
def main():
if len(sys.argv) != 3:
print(
"Please specify collection time (seconds), and path to save files")
exit()
max_time = sys.argv[1]
print(max_time)
path = sys.argv[2]
print(path)
#delay program 60 sec, so that user can get to start location
print(
"\nYou have 60 seconds to get to start location before program will begin"
)
time.sleep(60)
print("\nInitializing camera")
cam = sl.Camera()
init = sl.InitParameters()
# Use HD720 video mode (default Use a right-handed Y-up coordinate system)
init.camera_resolution = sl.RESOLUTION.RESOLUTION_HD720
init.coordinate_system = sl.COORDINATE_SYSTEM.COORDINATE_SYSTEM_RIGHT_HANDED_Y_UP
# Set units in meters
init.coordinate_units = sl.UNIT.UNIT_METER
status = cam.open(init)
if status != sl.ERROR_CODE.SUCCESS:
print(repr(status))
exit()
runtime = sl.RuntimeParameters()
spatial = sl.SpatialMappingParameters()
transform = sl.Transform()
tracking = sl.TrackingParameters(transform)
cam.enable_tracking(tracking)
cam.enable_spatial_mapping(spatial)
#for Positional Tracking:
zed_pose = sl.Pose()
zed_imu = sl.IMUData()
runtime_parameters = sl.RuntimeParameters()
#temporary file to save translation data to, until you know the filename (given from the user)
#path = '/media/nvidia/SD1/translation.csv'
position_file = open((path + ".csv"), 'w+')
pymesh = sl.Mesh()
print("Camera setup")
#get start time
start_time = time.time()
print("Starting to collect data")
while (time.time() - start_time) < float(max_time):
cam.grab(runtime)
cam.request_mesh_async()
# Get the pose of the left eye of the camera with reference to the world frame
cam.get_position(zed_pose, sl.REFERENCE_FRAME.REFERENCE_FRAME_WORLD)
cam.get_imu_data(zed_imu, sl.TIME_REFERENCE.TIME_REFERENCE_IMAGE)
# Display the translation and timestamp
py_translation = sl.Translation()
tx = round(zed_pose.get_translation(py_translation).get()[0], 3)
ty = round(zed_pose.get_translation(py_translation).get()[1], 3)
tz = round(zed_pose.get_translation(py_translation).get()[2], 3)
#position_file.write("Translation: Tx: {0}, Ty: {1}, Tz {2}, Timestamp: {3}\n".format(tx, ty, tz, zed_pose.timestamp))
position_file.write("{0},{1},{2},{3}\n".format(tx, ty, tz,
zed_pose.timestamp))
print(
"Finished collecting data, extracting mesh, saving and shutting down camera"
)
cam.extract_whole_mesh(pymesh)
cam.disable_tracking()
cam.disable_spatial_mapping()
filter_params = sl.MeshFilterParameters()
filter_params.set(sl.MESH_FILTER.MESH_FILTER_HIGH)
print("Filtering params : {0}.".format(pymesh.filter(filter_params)))
apply_texture = pymesh.apply_texture(
sl.MESH_TEXTURE_FORMAT.MESH_TEXTURE_RGBA)
print("Applying texture : {0}.".format(apply_texture))
#print_mesh_information(pymesh, apply_texture)
#save_filter(filter_params)
#save_mesh(pymesh)
cam.close()
position_file.close()
#save_position(path)
save_all_path_arg(filter_params, pymesh, path)
print("\nFINISH")