def tangent2(layer, data, index, layer2, i):
fcount = featureCount(layer)
if fcount > 0:
fant = [f for f in layer.getFeatures()][fcount - 1]
length = fant.geometry().length()
lpt = qgsGeometryToPolyline(fant.geometry())[-1]
angle = 90 - lastAzimuth(fant.geometry())
lpt = p2QgsPoint(lpt.x() - length * np.cos(np.deg2rad(angle)),
lpt.y() - length * np.sin(np.deg2rad(angle)))
l1 = QgsGeometry.fromPolyline([
p2QgsPoint(lpt),
p2QgsPoint(qgsGeometryToPolyline(fant.geometry())[-1])
])
l2 = QgsGeometry(l1)
dd = diff(
qgsGeometryToPolyline(fant.geometry())[-1],
qgsGeometryToPolyline(fant.geometry())[0])
l2.translate(dd.x(), dd.y())
PI = qgsGeometryToPolyline(fant.geometry())[-1]
d = 0
data["Disable"].append("C")
else:
l1, l2 = getTangentesGeometry(layer2, i)
d = deflection(layer2, i)
PI = qgsGeometryToPolyline(l1)[-1]
if l1 is None:
l1 = QgsGeometry(l2)
dd = diff(
qgsGeometryToPolyline(l2)[0],
qgsGeometryToPolyline(l2)[-1])
l2.translate(dd.x(), dd.y())
elif l2 is None:
l2 = QgsGeometry(l1)
dd = diff(
qgsGeometryToPolyline(l1)[-1],
qgsGeometryToPolyline(l2)[0])
l2.translate(dd.x(), dd.y())
startAngle = azi(qgsGeometryToPolyline(l1))
angle = 90 - (data["D"] + startAngle)
angle = angle if angle > 0 else 360 + angle
angle = angle if angle < 360 else angle - 360
p1 = p2QgsPoint(PI)
p2 = p2QgsPoint(data["L"] * np.cos(np.deg2rad(angle)) + p1.x(),
data["L"] * np.sin(np.deg2rad(angle)) + p1.y())
line = QgsGeometry.fromPolyline([p1, p2])
if data["T"] > l1.length():
data["T"] = l1.length
if index == "R":
pass
elif index == "L":
if data["C"]:
Lmax = np.sqrt(l1.length()**2 + l2.length()**2 - 2 * l1.length() *
l2.length() * np.cos(np.deg2rad(360 - d)))
if data["L"] > Lmax:
data["L"] = Lmax
data["T"] = abs(data["L"] / (2 * np.tan(np.deg2rad((d) / 2))))
data["D"] = d - 90
p1 = p2QgsPoint(l1.interpolate(l1.length() - data["T"]).asPoint())
p2 = p2QgsPoint(l2.interpolate(data["T"]).asPoint())
else:
p1 = p2QgsPoint(l1.interpolate(l1.length() - data["T"]).asPoint())
dd = diff(p1, PI)
line.translate(dd.x(), dd.y())
p2 = qgsGeometryToPolyline(line)[-1]
elif index == "T":
if data["C"]:
data["L"] = abs(data["T"] * 2 * np.tan(np.deg2rad((d) / 2)))
p1 = p2QgsPoint(l1.interpolate(l1.length() - data["T"]).asPoint())
p2 = p2QgsPoint(l2.interpolate(data["T"]).asPoint())
else:
p1 = p2QgsPoint(l1.interpolate(l1.length() - data["T"]).asPoint())
dd = diff(p1, PI)
line.translate(dd.x(), dd.y())
p2 = qgsGeometryToPolyline(line)[-1]
elif index == "D":
if data["C"]:
data["D"] = 0
data["T"] = 0
data["C"] = False
p2 = qgsGeometryToPolyline(line)[-1]
else:
p1 = p2QgsPoint(l1.interpolate(l1.length() - data["T"]).asPoint())
dd = diff(p1, PI)
line.translate(dd.x(), dd.y())
p2 = qgsGeometryToPolyline(line)[-1]
elif index == "C":
if data["C"]:
Lmax = np.sqrt(l1.length()**2 + l2.length()**2 - 2 * l1.length() *
l2.length() * np.cos(np.deg2rad(360 - d)))
if data["L"] > Lmax:
data["L"] = Lmax
data["T"] = abs(data["L"] / (2 * np.tan(np.deg2rad((d) / 2))))
data["D"] = d - 90
p1 = p2QgsPoint(l1.interpolate(l1.length() - data["T"]).asPoint())
p2 = p2QgsPoint(l2.interpolate(data["T"]).asPoint())
else:
data["D"] = d
if data["L"] < data["T"]:
data["L"] = data["T"]
data["T"] = 0
p1 = p2QgsPoint(l1.interpolate(l1.length() - data["T"]).asPoint())
p2 = p2QgsPoint(l2.interpolate(data["L"] - data["T"]).asPoint())
elif index == "S":
data["D"] = 0
data["T"] = 0
p2 = qgsGeometryToPolyline(line)[-1]
feat = QgsFeature(layer.fields())
feat.setAttribute('Tipo', 'T')
feat.setGeometry(QgsGeometry.fromPolyline([p2QgsPoint(p1),
p2QgsPoint(p2)]))
layer.dataProvider().addFeatures([feat])
data["Disable"].append("R")
data["Disable"].append("C")
return data
def circleArc(layer, data, index, layer2, i, ic):
fcount = featureCount(layer)
if fcount > 0:
l1, l2 = getTangentesGeometry(layer2, ic, i)
d = deflection(layer2, i)
PI = qgsGeometryToPolyline(l1)[-1]
else:
l1, l2 = getTangentesGeometry(layer2, ic, i)
d = deflection(layer2, i)
PI = qgsGeometryToPolyline(l1)[-1]
if l1 is None:
l1 = QgsGeometry(l2)
dd = diff(
qgsGeometryToPolyline(l2)[0],
qgsGeometryToPolyline(l2)[-1])
l2.translate(dd.x(), dd.y())
elif l2 is None:
l2 = QgsGeometry(l1)
dd = diff(
qgsGeometryToPolyline(l1)[-1],
qgsGeometryToPolyline(l2)[0])
l2.translate(dd.x(), dd.y())
pl = qgsGeometryToPolyline(l1)
startAngle = azi(pl)
angle = 90 - (data["D"] + startAngle)
angle = angle if angle > 0 else 360 + angle
angle = angle if angle < 360 else angle - 360
angleInternal = 180 - d
p1 = p2QgsPoint(PI)
corda = 2 * data["R"] * np.sin(np.deg2rad(angleInternal / 2))
p2 = p2QgsPoint(corda * np.cos(np.deg2rad(angle)) + p1.x(),
corda * np.sin(np.deg2rad(angle)) + p1.y())
T = None
E = None
p = None
arc = None
if index == "R":
if data["C"]:
data["L"] = np.deg2rad(abs(d)) * data["R"] * abs(data["D"] / d)
corda = 2 * data["R"] * np.sin(np.deg2rad(abs(data["D"]) / 2))
data["T"] = abs(corda /
(2 * np.tan(np.deg2rad((abs(data["D"])) / 2))))
p1 = p2QgsPoint(l1.interpolate(l1.length() - data["T"]).asPoint())
p2 = p2QgsPoint(l2.interpolate(data["T"]).asPoint())
PI = p2QgsPoint(PI)
else:
data["L"] = np.deg2rad(abs(data["D"])) * data["R"]
corda = 2 * data["R"] * np.sin(np.deg2rad(abs(data["D"]) / 2))
T = abs(corda / (2 * np.tan(np.deg2rad((abs(data["D"])) / 2))))
p1 = p2QgsPoint(l1.interpolate(l1.length() - data["T"]).asPoint())
l2 = QgsGeometry(l1)
dd = diff(p1, qgsGeometryToPolyline(l2)[0])
l2.translate(dd.x(), dd.y())
dd = diff(
l2.interpolate(T).asPoint(),
qgsGeometryToPolyline(l2)[0])
l2.translate(dd.x(), dd.y())
l2.rotate(data["D"], QgsPointXY(qgsGeometryToPolyline(l2)[0]))
l2.extendLine(0, 500000)
p1 = p2QgsPoint(l1.interpolate(l1.length() - data["T"]).asPoint())
p2 = p2QgsPoint(l2.interpolate(data["T"]).asPoint())
PI = p2QgsPoint(qgsGeometryToPolyline(l2)[0])
elif index == "L":
if data["C"]:
if data["L"] > np.deg2rad(abs(d)) * data["R"] * abs(data["D"] / d):
data["D"] = d / abs(d) * abs(
abs(d) * data["L"] / (np.deg2rad(abs(d)) * data["R"]))
if data["L"] > np.deg2rad(abs(d)) * data["R"]:
data["R"] = data["L"] / (np.deg2rad(abs(d)))
corda = 2 * data["R"] * np.sin(np.deg2rad(abs(d) / 2))
data["T"] = abs(corda / (2 * np.tan(np.deg2rad((abs(d)) / 2))))
p1 = p2QgsPoint(
l1.interpolate(l1.length() - data["T"]).asPoint())
p2 = p2QgsPoint(l2.interpolate(data["T"]).asPoint())
PI = p2QgsPoint(PI)
else:
data["R"] = data["L"] / (np.deg2rad(abs(data["D"])))
corda = 2 * data["R"] * np.sin(np.deg2rad(abs(data["D"]) / 2))
T = abs(corda / (2 * np.tan(np.deg2rad(abs(data["D"]) / 2))))
p1 = p2QgsPoint(l1.interpolate(l1.length() - data["T"]).asPoint())
l2 = QgsGeometry(l1)
dd = diff(p1, qgsGeometryToPolyline(l2)[0])
l2.translate(dd.x(), dd.y())
dd = diff(
l2.interpolate(T).asPoint(),
qgsGeometryToPolyline(l2)[0])
l2.translate(dd.x(), dd.y())
l2.rotate(data["D"], QgsPointXY(qgsGeometryToPolyline(l2)[0]))
p1 = p2QgsPoint(l1.interpolate(l1.length() - data["T"]).asPoint())
p2 = p2QgsPoint(l2.interpolate(data["T"]).asPoint())
PI = p2QgsPoint(qgsGeometryToPolyline(l2)[0])
elif index == "T":
if data["C"]:
corda = data["T"] * abs(2 * np.tan(np.deg2rad((d) / 2)))
data["L"] = np.deg2rad(abs(d)) * data["R"] * abs(data["D"] / d)
data["R"] = corda / (2 * np.sin(np.deg2rad(angleInternal / 2)))
data["L"] = np.deg2rad(abs(d)) * data["R"] * abs(data["D"] / d)
p1 = p2QgsPoint(l1.interpolate(l1.length() - data["T"]).asPoint())
p2 = p2QgsPoint(l2.interpolate(data["T"]).asPoint())
PI = p2QgsPoint(PI)
T = data["T"]
else:
corda = 2 * data["R"] * np.sin(np.deg2rad(abs(data["D"]) / 2))
T = abs(corda / (2 * np.tan(np.deg2rad((abs(data["D"])) / 2))))
p1 = p2QgsPoint(l1.interpolate(l1.length() - data["T"]).asPoint())
l2 = QgsGeometry(l1)
dd = diff(p1, qgsGeometryToPolyline(l2)[0])
l2.translate(dd.x(), dd.y())
dd = diff(
l2.interpolate(T).asPoint(),
qgsGeometryToPolyline(l2)[0])
l2.translate(dd.x(), dd.y())
l2.rotate(data["D"], QgsPointXY(qgsGeometryToPolyline(l2)[0]))
p1 = p2QgsPoint(l1.interpolate(l1.length() - data["T"]).asPoint())
p2 = p2QgsPoint(l2.interpolate(data["T"]).asPoint())
PI = p2QgsPoint(qgsGeometryToPolyline(l2)[0])
elif index == "D":
if data["C"]:
T = data["T"]
data["L"] = np.deg2rad(abs(d)) * data["R"] * abs(data["D"] / d)
p1 = p2QgsPoint(l1.interpolate(l1.length() - data["T"]).asPoint())
p2 = p2QgsPoint(l2.interpolate(data["T"]).asPoint())
PI = p2QgsPoint(PI)
E = abs(T * np.tan(np.deg2rad(d / 4)))
l2 = QgsGeometry(l1)
dd = diff(PI, qgsGeometryToPolyline(l2)[0])
l2.translate(dd.x(), dd.y())
l2.rotate(
abs((abs(d) - 180) / d * data["D"] + 180 - abs(d)) * d / abs(d)
+ d,
qgsGeometryToPolyline(l2)[0])
p = p2QgsPoint((p1.x() + p2.x()) / 2, (p2.y() + p1.y()) / 2)
tmp_line = QgsGeometry.fromPolyline([p2QgsPoint(PI), p])
p = p2QgsPoint(tmp_line.interpolate(E).asPoint())
arc = QgsCircularString()
arc.setPoints([p1, p, p2])
l3 = QgsGeometry(l2)
dd = diff(
qgsGeometryToPolyline(l3)[-1],
qgsGeometryToPolyline(l3)[0])
l3.translate(dd.x(), dd.y())
l3.rotate(-90 * d / abs(d), qgsGeometryToPolyline(l3)[0])
l2 = unifyGeometry(l2, l3)
arc = QgsCircularString()
arc.setPoints([p1, p, p2])
arc = splitGeometry(l2, createGeometry(arc))
else:
data["L"] = np.deg2rad(abs(data["D"])) * data["R"]
corda = 2 * data["R"] * np.sin(np.deg2rad(abs(data["D"]) / 2))
T = abs(corda / (2 * np.tan(np.deg2rad((abs(data["D"])) / 2))))
p1 = p2QgsPoint(l1.interpolate(l1.length() - data["T"]).asPoint())
l2 = QgsGeometry(l1)
dd = diff(p1, qgsGeometryToPolyline(l2)[0])
l2.translate(dd.x(), dd.y())
PI = p2QgsPoint(l2.interpolate(T).asPoint())
dd = diff(PI, qgsGeometryToPolyline(l2)[0])
l2.translate(dd.x(), dd.y())
l2.rotate(data["D"], qgsGeometryToPolyline(l2)[0])
p2 = p2QgsPoint(l2.interpolate(T).asPoint())
elif index == "C":
if data["C"]:
data["D"] = d
data["L"] = np.deg2rad(abs(data["D"])) * data["R"]
corda = 2 * data["R"] * np.sin(np.deg2rad(abs(data["D"]) / 2))
data["T"] = abs(corda / (2 * np.tan(np.deg2rad((d) / 2))))
p1 = p2QgsPoint(l1.interpolate(l1.length() - data["T"]).asPoint())
p2 = p2QgsPoint(l2.interpolate(data["T"]).asPoint())
PI = p2QgsPoint(PI)
else:
p1 = p2QgsPoint(l1.interpolate(l1.length() - data["T"]).asPoint())
p2 = p2QgsPoint(l2.interpolate(data["T"]).asPoint())
PI = p2QgsPoint(PI)
elif index == "S":
data["C"] = True
# data["D"]=d
data["L"] = np.deg2rad(abs(data["D"])) * data["R"]
corda = 2 * data["R"] * np.sin(np.deg2rad(abs(data["D"]) / 2))
#data["T"]=abs(corda/(2*np.tan(np.deg2rad((d)/2))))
p1 = p2QgsPoint(l1.interpolate(l1.length() - data["T"]).asPoint())
p2 = p2QgsPoint(l2.interpolate(data["T"]).asPoint())
PI = p2QgsPoint(PI)
if (data["T"] > l1.length() or data["T"] > l2.length()) and data["C"]:
data["L"] = np.deg2rad(abs(d)) * data["R"] * abs(data["D"] / d)
corda = 2 * data["R"] * np.sin(np.deg2rad(abs(data["D"]) / 2))
data["T"] = abs(corda / (2 * np.tan(np.deg2rad((d) / 2))))
p1 = p2QgsPoint(l1.interpolate(l1.length() - data["T"]).asPoint())
p2 = p2QgsPoint(l2.interpolate(data["T"]).asPoint())
PI = p2QgsPoint(PI)
T = data["T"] if T is None else T
E = abs(T * np.tan(np.deg2rad(data["D"] / 4))) if E is None else E
p = p2QgsPoint((p1.x() + p2.x()) / 2, (p2.y() + p1.y()) / 2)
#msgLog("p: " + str(p.x()) +"," +str(p.y()))
#msgLog("PI: " + str(PI.x()) +"," +str(PI.y()))
tmp_line = QgsGeometry.fromPolyline([p2QgsPoint(PI), p])
p = p2QgsPoint(tmp_line.interpolate(E).asPoint())
feat = QgsFeature(layerFields())
feat.setAttributes(['C', "", data["R"], data["D"], data["T"], data["L"]])
# Create a QgsCircularStringV2
circularRing = QgsCircularString()
# Set first point, intermediate point for curvature and end point
circularRing.setPoints([p1, p, p2])
# data["R"]=QgsGeometryUtils.circleCenterRadius(p1,p,p2)[0]
circularRing = arc if arc else circularRing
feat.setGeometry(circularRing)
f2 = QgsFeature(layer.fields())
f2.setGeometry(l2)
layer.dataProvider().addFeatures([feat])
return data
def circleArc2(layer, data, index, layer2, i):
fcount = featureCount(layer)
if fcount > 0:
fant = [f for f in layer.getFeatures()][fcount - 1]
l1 = fant.geometry()
l2 = QgsGeometry(l1)
dd = diff(
qgsGeometryToPolyline(fant.geometry())[-1],
qgsGeometryToPolyline(fant.geometry())[0])
l2.translate(dd.x(), dd.y())
PI = qgsGeometryToPolyline(fant.geometry())[-1]
d = float(data["D"]) if not index == "S" else 90.0
l2.rotate(d, QgsPointXY(PI))
else:
data["Disable"].append("C")
data["Disable"].append("D")
data["Disable"].append("R")
data["Disable"].append("L")
data["Disable"].append("T")
return data
data["Disable"].append("C")
startAngle = azi(qgsGeometryToPolyline(l1))
angle = 90 - (data["D"] + startAngle)
angle = angle if angle > 0 else 360 + angle
angle = angle if angle < 360 else angle - 360
angleInternal = 180 - abs(d)
p1 = p2QgsPoint(PI)
corda = 2 * data["R"] * np.sin(np.deg2rad(angleInternal / 2))
p2 = p2QgsPoint(corda * np.cos(np.deg2rad(angle)) + p1.x(),
corda * np.sin(np.deg2rad(angle)) + p1.y())
T = None
E = None
p = None
arc = None
if index == "R":
pass
elif index == "L":
data["R"] = data["L"] / (np.deg2rad(abs(data["D"])))
corda = 2 * data["R"] * np.sin(np.deg2rad(abs(data["D"]) / 2))
T = abs(corda / (2 * np.tan(np.deg2rad(abs(data["D"]) / 2))))
p1 = p2QgsPoint(l1.interpolate(l1.length() - data["T"]).asPoint())
l2 = QgsGeometry(l1)
dd = diff(p1, qgsGeometryToPolyline(l2)[0])
l2.translate(dd.x(), dd.y())
dd = diff(l2.interpolate(T).asPoint(), qgsGeometryToPolyline(l2)[0])
l2.translate(dd.x(), dd.y())
l2.rotate(data["D"], QgsPointXY(qgsGeometryToPolyline(l2)[0]))
p1 = p2QgsPoint(l1.interpolate(l1.length() - data["T"]).asPoint())
p2 = p2QgsPoint(l2.interpolate(data["T"]).asPoint())
PI = p2QgsPoint(qgsGeometryToPolyline(l2)[0])
elif index == "T":
corda = 2 * data["R"] * np.sin(np.deg2rad(abs(data["D"]) / 2))
T = abs(corda / (2 * np.tan(np.deg2rad((abs(data["D"])) / 2))))
p1 = p2QgsPoint(l1.interpolate(l1.length() - data["T"]).asPoint())
l2 = QgsGeometry(l1)
dd = diff(p1, qgsGeometryToPolyline(l2)[0])
l2.translate(dd.x(), dd.y())
dd = diff(l2.interpolate(T).asPoint(), qgsGeometryToPolyline(l2)[0])
l2.translate(dd.x(), dd.y())
l2.rotate(data["D"], QgsPointXY(qgsGeometryToPolyline(l2)[0]))
p1 = p2QgsPoint(l1.interpolate(l1.length() - data["T"]).asPoint())
p2 = p2QgsPoint(l2.interpolate(data["T"]).asPoint())
PI = p2QgsPoint(qgsGeometryToPolyline(l2)[0])
elif index == "D":
data["L"] = np.deg2rad(abs(data["D"])) * data["R"]
corda = 2 * data["R"] * np.sin(np.deg2rad(abs(data["D"]) / 2))
T = abs(corda / (2 * np.tan(np.deg2rad((abs(data["D"])) / 2))))
p1 = p2QgsPoint(l1.interpolate(l1.length() - data["T"]).asPoint())
l2 = QgsGeometry(l1)
dd = diff(p1, qgsGeometryToPolyline(l2)[0])
l2.translate(dd.x(), dd.y())
PI = p2QgsPoint(l2.interpolate(T).asPoint())
dd = diff(PI, qgsGeometryToPolyline(l2)[0])
l2.translate(dd.x(), dd.y())
l2.rotate(data["D"], qgsGeometryToPolyline(l2)[0])
p2 = p2QgsPoint(l2.interpolate(T).asPoint())
elif index == "C":
pass
elif index == "S":
data["C"] = True
data["D"] = 90
data["L"] = np.deg2rad(abs(data["D"])) * data["R"]
data["T"] = 0
if (data["T"] > l1.length() or data["T"] > l2.length()) and data["C"]:
data["L"] = np.deg2rad(abs(d)) * data["R"] * abs(data["D"] / d)
corda = 2 * data["R"] * np.sin(np.deg2rad(abs(data["D"]) / 2))
data["T"] = abs(corda / (2 * np.tan(np.deg2rad((d) / 2))))
p1 = p2QgsPoint(l1.interpolate(l1.length() - data["T"]).asPoint())
PI = p2QgsPoint(PI)
corda = 2 * data["R"] * np.sin(np.deg2rad(angleInternal / 2))
p2 = p2QgsPoint(corda * np.cos(np.deg2rad(angle)) + p1.x(),
corda * np.sin(np.deg2rad(angle)) + p1.y())
T = float(data["T"]) if T is None else T
E = abs(T * np.tan(np.deg2rad(data["D"] / 4))) if E is None else E
p = p2QgsPoint((p1.x() + p2.x()) / 2, (p2.y() + p1.y()) / 2)
tmp_line = QgsGeometry.fromPolyline([p2QgsPoint(PI), p])
p = p2QgsPoint(tmp_line.interpolate(E).asPoint())
feat = QgsFeature(layer.fields())
feat.setAttribute('Tipo', 'C')
# Create a QgsCircularStringV2
circularRing = QgsCircularString()
# Set first point, intermediate point for curvature and end point
circularRing.setPoints([p1, p, p2])
# data["R"]=QgsGeometryUtils.circleCenterRadius(p1,p,p2)[0]
circularRing = arc if arc else circularRing
feat.setGeometry(circularRing)
f2 = QgsFeature(layer.fields())
f2.setGeometry(l2)
layer.dataProvider().addFeatures([feat])
data["Disable"].append("C")
return data
def polyTransCircle(layer, data, index, layer2, i, ic):
LsMax = data["R"] * abs(data["D"]) * np.pi / 180
LsMin = 0
fcount = featureCount(layer)
if fcount > 0:
l1, l2 = getTangentesGeometry(layer2, ic, i)
d = deflection(layer2, i)
PI = qgsGeometryToPolyline(l1)[-1]
data["Disable"].append("C")
else:
l1, l2 = getTangentesGeometry(layer2, ic, i)
d = deflection(layer2, i)
PI = qgsGeometryToPolyline(l1)[-1]
if l1 is None:
l1 = QgsGeometry(l2)
dd = diff(
qgsGeometryToPolyline(l2)[0],
qgsGeometryToPolyline(l2)[-1])
l2.translate(dd.x(), dd.y())
elif l2 is None:
l2 = QgsGeometry(l1)
dd = diff(
qgsGeometryToPolyline(l1)[-1],
qgsGeometryToPolyline(l2)[0])
l2.translate(dd.x(), dd.y())
startAngle = azi(qgsGeometryToPolyline(l1))
angle = 90 - (data["D"] + startAngle)
angle = angle if angle > 0 else 360 + angle
angle = angle if angle < 360 else angle - 360
p1 = p2QgsPoint(PI)
p2 = p2QgsPoint(data["L"] * np.cos(np.deg2rad(angle)) + p1.x(),
data["L"] * np.sin(np.deg2rad(angle)) + p1.y())
line = QgsGeometry.fromPolyline([p1, p2])
a1 = azi(polyline(l1))
a2 = azi(polyline(l2))
msgLog("a1: " + str(a1) + " " + "a2: " + str(a2))
data["C"] = True
corda = 2 * data["R"] * np.sin(np.deg2rad(abs(data["D"]) / 2))
p1 = p2QgsPoint(l1.interpolate(l1.length() - data["T"]).asPoint())
p2 = p2QgsPoint(l2.interpolate(data["T"]).asPoint())
PI = p2QgsPoint(PI)
p1 = p2QgsPoint(p1)
p2 = p2QgsPoint(p2)
feat1 = QgsFeature(layerFields())
feat2 = QgsFeature(layerFields())
feat3 = QgsFeature(layerFields())
feat1.setAttributes(['E', "", data["R"], data["D"], data["T"], data["L"]])
feat2.setAttributes(['C', "", data["R"], data["D"], data["T"], data["L"]])
feat3.setAttributes(['E', "", data["R"], data["D"], data["T"], data["L"]])
# if ((a2 - a1 >= 0 and (a1 <= 90 or a1 >= 270)) or (a2 - a1 <= 0 and (a1 >= 90 or a1 <= 270))) and not (
# (abs(a1 - a2) > 180 or (a1 < 90 and a2 > 90) or (a1 < 90, a2 < 90)) and not (a2 - a1) < 0):
pointsT1 = [
p2QgsPoint(
clotX(L**2 / (2 * data["R"] * data["L"])) * L,
clotY(L**2 / (2 * data["R"] * data["L"])) * L)
for L in xrange(data["L"])
]
pointsT2 = list(
reversed([
p2QgsPoint(
clotX(L**2 / (2 * data["R"] * data["L"])) * L,
1000 - clotY(L**2 / (2 * data["R"] * data["L"])) * L)
for L in xrange(data["L"])
]))
IpointsT1 = [
p2QgsPoint(
clotX(L**2 / (2 * data["R"] * data["L"])) * L,
1000 - clotY(L**2 / (2 * data["R"] * data["L"])) * L)
for L in xrange(data["L"])
]
IpointsT2 = list(
reversed([
p2QgsPoint(
clotX(L**2 / (2 * data["R"] * data["L"])) * L,
clotY(L**2 / (2 * data["R"] * data["L"])) * L)
for L in xrange(data["L"])
]))
g1 = QgsGeometry.fromPolyline(pointsT1)
dd = diff(p1, pointsT1[0])
g1.translate(dd.x(), dd.y())
g1.rotate(polyline(l1)[0].azimuth(polyline(l1)[-1]) - 90, polyline(g1)[0])
g2 = QgsGeometry.fromPolyline(pointsT2)
dd = diff(p2, pointsT2[-1])
g2.translate(dd.x(), dd.y())
g2.rotate(polyline(l2)[0].azimuth(polyline(l2)[-1]) + 90, polyline(g2)[-1])
Ig1 = QgsGeometry.fromPolyline(IpointsT1)
dd = diff(p1, IpointsT1[0])
Ig1.translate(dd.x(), dd.y())
Ig1.rotate(
polyline(l1)[0].azimuth(polyline(l1)[-1]) - 90,
polyline(Ig1)[0])
Ig2 = QgsGeometry.fromPolyline(IpointsT2)
dd = diff(p2, IpointsT2[-1])
Ig2.translate(dd.x(), dd.y())
Ig2.rotate(
polyline(l2)[0].azimuth(polyline(l2)[-1]) + 90,
polyline(Ig2)[-1])
g1, g2 = [g1, g2] if polyline(g1)[-1].distance(polyline(g2)[0]) \
<= polyline(Ig1)[-1].distance(polyline(Ig2)[0]) else [Ig1, Ig2]
feat1.setGeometry(g1)
feat3.setGeometry(g2)
p = p2QgsPoint((p1.x() + p2.x()) / 2, (p2.y() + p1.y()) / 2)
p1 = p2QgsPoint(polyline(g1)[-1])
p2 = p2QgsPoint(polyline(g2)[0])
tmp_line = QgsGeometry.fromPolyline([p2QgsPoint(PI), p])
theta = data["L"] / (2 * data["R"])
ys = clotY(theta) * data["L"]
p = ys - data["R"] * (1 - np.cos(theta))
E = abs((data["R"] + p) /
np.cos(np.deg2rad((data["D"] + 2 * np.rad2deg(theta)) / 2)) -
data["R"])
msgLog("E=" + str(E))
p = p2QgsPoint(tmp_line.interpolate(E).asPoint())
circularRing = QgsCircularString()
circularRing.setPoints([p1, p, p2])
feat2.setGeometry(circularRing)
layer.dataProvider().addFeatures([feat1, feat2, feat3])
return data
