Ejemplo n.º 1
0
    def testConvertSingleUnit(self):

        ms = QgsMapSettings()
        ms.setExtent(QgsRectangle(0, 0, 100, 100))
        ms.setOutputSize(QSize(100, 50))
        ms.setOutputDpi(300)
        r = QgsRenderContext.fromMapSettings(ms)

        # renderer scale should be about 1:291937841

        # start with no min/max scale
        c = QgsMapUnitScale()
        #self.assertEqual(r.scaleFactor(),666)

        sf = r.convertToPainterUnits(1, QgsUnitTypes.RenderMapUnits, c)
        self.assertAlmostEqual(sf, 0.5, places=5)
        sf = r.convertToPainterUnits(1, QgsUnitTypes.RenderMillimeters, c)
        self.assertAlmostEqual(sf, 11.8110236, places=5)
        sf = r.convertToPainterUnits(1, QgsUnitTypes.RenderPoints, c)
        self.assertAlmostEqual(sf, 4.166666665625, places=5)
        sf = r.convertToPainterUnits(1, QgsUnitTypes.RenderInches, c)
        self.assertAlmostEqual(sf, 300.0, places=5)
        sf = r.convertToPainterUnits(1, QgsUnitTypes.RenderPixels, c)
        self.assertAlmostEqual(sf, 1.0, places=5)

        # minimum scale greater than the renderer scale, so should be limited to minScale
        c.minScale = 150000000.0
        sf = r.convertToPainterUnits(1, QgsUnitTypes.RenderMapUnits, c)
        self.assertAlmostEqual(sf, 3.89250455, places=5)
        # only conversion from mapunits should be affected
        sf = r.convertToPainterUnits(1, QgsUnitTypes.RenderMillimeters, c)
        self.assertAlmostEqual(sf, 11.8110236, places=5)
        sf = r.convertToPainterUnits(1, QgsUnitTypes.RenderPoints, c)
        self.assertAlmostEqual(sf, 4.166666665625, places=5)
        sf = r.convertToPainterUnits(1, QgsUnitTypes.RenderInches, c)
        self.assertAlmostEqual(sf, 300.0, places=5)
        sf = r.convertToPainterUnits(1, QgsUnitTypes.RenderPixels, c)
        self.assertAlmostEqual(sf, 1.0, places=5)
        c.minScale = 0

        # maximum scale less than the renderer scale, so should be limited to maxScale
        c.maxScale = 350000000.0
        sf = r.convertToPainterUnits(1, QgsUnitTypes.RenderMapUnits, c)
        self.assertAlmostEqual(sf, 0.5, places=5)
        # only conversion from mapunits should be affected
        sf = r.convertToPainterUnits(1, QgsUnitTypes.RenderMillimeters, c)
        self.assertAlmostEqual(sf, 11.8110236, places=5)
        sf = r.convertToPainterUnits(1, QgsUnitTypes.RenderPoints, c)
        self.assertAlmostEqual(sf, 4.166666665625, places=5)
        sf = r.convertToPainterUnits(1, QgsUnitTypes.RenderInches, c)
        self.assertAlmostEqual(sf, 300.0, places=5)
        sf = r.convertToPainterUnits(1, QgsUnitTypes.RenderPixels, c)
        self.assertAlmostEqual(sf, 1.0, places=5)
Ejemplo n.º 2
0
    def testPixelSizeScaleFactor(self):
        # test QgsSymbolLayerUtils::pixelSizeScaleFactor() using QgsMapUnitScale

        ms = QgsMapSettings()
        ms.setExtent(QgsRectangle(0, 0, 100, 100))
        ms.setOutputSize(QSize(100, 50))
        ms.setOutputDpi(300)
        r = QgsRenderContext.fromMapSettings(ms)

        # renderer scale should be about 1:291937841

        # start with no min/max scale
        c = QgsMapUnitScale()

        sf = QgsSymbolLayerUtils.pixelSizeScaleFactor(r, QgsUnitTypes.RenderMapUnits, c)
        self.assertAlmostEqual(sf, 0.5, places=5)
        sf = QgsSymbolLayerUtils.pixelSizeScaleFactor(r, QgsUnitTypes.RenderMillimeters, c)
        self.assertAlmostEqual(sf, 11.8110236, places=5)
        sf = QgsSymbolLayerUtils.pixelSizeScaleFactor(r, QgsUnitTypes.RenderPoints, c)
        self.assertAlmostEqual(sf, 33.48006689762, places=5)
        sf = QgsSymbolLayerUtils.pixelSizeScaleFactor(r, QgsUnitTypes.RenderPixels, c)
        self.assertAlmostEqual(sf, 1.0, places=5)

        # minimum scale greater than the renderer scale, so should be limited to minScale
        c.minScale = 1 / 150000000.0
        sf = QgsSymbolLayerUtils.pixelSizeScaleFactor(r, QgsUnitTypes.RenderMapUnits, c)
        self.assertAlmostEqual(sf, 3.8925045, places=5)
        # only conversion from mapunits should be affected
        sf = QgsSymbolLayerUtils.pixelSizeScaleFactor(r, QgsUnitTypes.RenderMillimeters, c)
        self.assertAlmostEqual(sf, 11.811023, places=5)
        sf = QgsSymbolLayerUtils.pixelSizeScaleFactor(r, QgsUnitTypes.RenderPoints, c)
        self.assertAlmostEqual(sf, 33.48006689762, places=5)
        sf = QgsSymbolLayerUtils.pixelSizeScaleFactor(r, QgsUnitTypes.RenderPixels, c)
        self.assertAlmostEqual(sf, 1.0, places=5)
        c.minScale = 0

        # maximum scale less than the renderer scale, so should be limited to maxScale
        c.maxScale = 1 / 350000000.0
        sf = QgsSymbolLayerUtils.pixelSizeScaleFactor(r, QgsUnitTypes.RenderMapUnits, c)
        self.assertAlmostEqual(sf, 0.5, places=5)
        # only conversion from mapunits should be affected
        sf = QgsSymbolLayerUtils.pixelSizeScaleFactor(r, QgsUnitTypes.RenderMillimeters, c)
        self.assertAlmostEqual(sf, 11.8110236, places=5)
        sf = QgsSymbolLayerUtils.pixelSizeScaleFactor(r, QgsUnitTypes.RenderPoints, c)
        self.assertAlmostEqual(sf, 33.48006689762, places=5)
        sf = QgsSymbolLayerUtils.pixelSizeScaleFactor(r, QgsUnitTypes.RenderPixels, c)
        self.assertAlmostEqual(sf, 1.0, places=5)
Ejemplo n.º 3
0
    def testConvertToPainterUnits(self):

        ms = QgsMapSettings()
        ms.setExtent(QgsRectangle(0, 0, 100, 100))
        ms.setOutputSize(QSize(100, 50))
        ms.setOutputDpi(300)
        r = QgsRenderContext.fromMapSettings(ms)

        # renderer scale should be about 1:291937841

        # start with no min/max scale
        c = QgsMapUnitScale()

        size = r.convertToPainterUnits(2, QgsUnitTypes.RenderMapUnits, c)
        self.assertAlmostEqual(size, 1.0, places=5)
        size = r.convertToPainterUnits(2, QgsUnitTypes.RenderMillimeters, c)
        self.assertAlmostEqual(size, 23.622047, places=5)
        size = r.convertToPainterUnits(2, QgsUnitTypes.RenderPoints, c)
        self.assertAlmostEqual(size, 8.33333333125, places=5)
        size = r.convertToPainterUnits(2, QgsUnitTypes.RenderInches, c)
        self.assertAlmostEqual(size, 600.0, places=5)
        size = r.convertToPainterUnits(2, QgsUnitTypes.RenderPixels, c)
        self.assertAlmostEqual(size, 2.0, places=5)

        # minimum size greater than the calculated size, so size should be limited to minSizeMM
        c.minSizeMM = 5
        c.minSizeMMEnabled = True
        size = r.convertToPainterUnits(2, QgsUnitTypes.RenderMapUnits, c)
        self.assertAlmostEqual(size, 59.0551181, places=5)
        # only conversion from mapunits should be affected
        size = r.convertToPainterUnits(2, QgsUnitTypes.RenderMillimeters, c)
        self.assertAlmostEqual(size, 23.622047, places=5)
        size = r.convertToPainterUnits(2, QgsUnitTypes.RenderPoints, c)
        self.assertAlmostEqual(size, 8.33333333125, places=5)
        size = r.convertToPainterUnits(2, QgsUnitTypes.RenderInches, c)
        self.assertAlmostEqual(size, 600.0, places=5)
        size = r.convertToPainterUnits(2, QgsUnitTypes.RenderPixels, c)
        self.assertAlmostEqual(size, 2.0, places=5)
        c.minSizeMMEnabled = False

        # maximum size less than the calculated size, so size should be limited to maxSizeMM
        c.maxSizeMM = 0.1
        c.maxSizeMMEnabled = True
        size = r.convertToPainterUnits(2, QgsUnitTypes.RenderMapUnits, c)
        self.assertAlmostEqual(size, 1.0, places=5)
        # only conversion from mapunits should be affected
        size = r.convertToPainterUnits(2, QgsUnitTypes.RenderMillimeters, c)
        self.assertAlmostEqual(size, 23.622047, places=5)
        size = r.convertToPainterUnits(2, QgsUnitTypes.RenderPoints, c)
        self.assertAlmostEqual(size, 8.33333333125, places=5)
        size = r.convertToPainterUnits(2, QgsUnitTypes.RenderInches, c)
        self.assertAlmostEqual(size, 600.0, places=5)
        size = r.convertToPainterUnits(2, QgsUnitTypes.RenderPixels, c)
        self.assertAlmostEqual(size, 2.0, places=5)
Ejemplo n.º 4
0
    def testConvertToPainterUnits(self):
        # test QgsSymbolLayerV2Utils::convertToPainterUnits() using QgsMapUnitScale

        ms = QgsMapSettings()
        ms.setExtent(QgsRectangle(0, 0, 100, 100))
        ms.setOutputSize(QSize(100, 50))
        ms.setOutputDpi(300)
        r = QgsRenderContext.fromMapSettings(ms)

        # renderer scale should be about 1:291937841

        # start with no min/max scale
        c = QgsMapUnitScale()

        size = QgsSymbolLayerV2Utils.convertToPainterUnits(r, 2, QgsSymbolV2.MapUnit, c)
        self.assertAlmostEqual(size, 1.0, places=5)
        size = QgsSymbolLayerV2Utils.convertToPainterUnits(r, 2, QgsSymbolV2.MM, c)
        self.assertAlmostEqual(size, 23.622047, places=5)
        size = QgsSymbolLayerV2Utils.convertToPainterUnits(r, 2, QgsSymbolV2.Pixel, c)
        self.assertAlmostEqual(size, 2.0, places=5)

        # minimum size greater than the calculated size, so size should be limited to minSizeMM
        c.minSizeMM = 5
        c.minSizeMMEnabled = True
        size = QgsSymbolLayerV2Utils.convertToPainterUnits(r, 2, QgsSymbolV2.MapUnit, c)
        self.assertAlmostEqual(size, 59.0551181, places=5)
        # only conversion from mapunits should be affected
        size = QgsSymbolLayerV2Utils.convertToPainterUnits(r, 2, QgsSymbolV2.MM, c)
        self.assertAlmostEqual(size, 23.622047, places=5)
        size = QgsSymbolLayerV2Utils.convertToPainterUnits(r, 2, QgsSymbolV2.Pixel, c)
        self.assertAlmostEqual(size, 2.0, places=5)
        c.minSizeMMEnabled = False

        # maximum size less than the calculated size, so size should be limited to maxSizeMM
        c.maxSizeMM = 0.1
        c.maxSizeMMEnabled = True
        size = QgsSymbolLayerV2Utils.convertToPainterUnits(r, 2, QgsSymbolV2.MapUnit, c)
        self.assertAlmostEqual(size, 1.0, places=5)
        # only conversion from mapunits should be affected
        size = QgsSymbolLayerV2Utils.convertToPainterUnits(r, 2, QgsSymbolV2.MM, c)
        self.assertAlmostEqual(size, 23.622047, places=5)
        size = QgsSymbolLayerV2Utils.convertToPainterUnits(r, 2, QgsSymbolV2.Pixel, c)
        self.assertAlmostEqual(size, 2.0, places=5)
Ejemplo n.º 5
0
    def testEncodeDecode(self):
        # test encoding and decoding QgsMapUnitScale

        s = QgsMapUnitScale()
        s.minScale = 50
        s.maxScale = 100
        s.minSizeMMEnabled = True
        s.minSizeMM = 3
        s.maxSizeMMEnabled = False
        s.maxSizeMM = 99

        encode = QgsSymbolLayerV2Utils.encodeMapUnitScale(s)
        r = QgsSymbolLayerV2Utils.decodeMapUnitScale(encode)
        self.assertEqual(s, r)

        # check old style encoding
        encode = '9,78.3'
        r = QgsSymbolLayerV2Utils.decodeMapUnitScale(encode)
        self.assertEqual(r.minScale, 9)
        self.assertEqual(r.maxScale, 78.3)
        self.assertFalse(r.minSizeMMEnabled)
        self.assertEqual(r.minSizeMM, 0)
        self.assertFalse(r.maxSizeMMEnabled)
        self.assertEqual(r.maxSizeMM, 0)
Ejemplo n.º 6
0
    def testConvertToMapUnits(self):
        ms = QgsMapSettings()
        ms.setExtent(QgsRectangle(0, 0, 100, 100))
        ms.setOutputSize(QSize(100, 50))
        ms.setOutputDpi(300)
        r = QgsRenderContext.fromMapSettings(ms)

        # renderer scale should be about 1:291937841

        # start with no min/max scale
        c = QgsMapUnitScale()

        size = r.convertToMapUnits(2, QgsUnitTypes.RenderMapUnits, c)
        self.assertEqual(size, 2.0)
        size = r.convertToMapUnits(2, QgsUnitTypes.RenderMillimeters, c)
        self.assertAlmostEqual(size, 47.244094, places=5)
        size = r.convertToMapUnits(5.66929, QgsUnitTypes.RenderPoints, c)
        self.assertAlmostEqual(size, 47.2440833, places=5)
        size = r.convertToMapUnits(5.66929, QgsUnitTypes.RenderInches, c)
        self.assertAlmostEqual(size, 3401.574, places=5)
        size = r.convertToMapUnits(2, QgsUnitTypes.RenderPixels, c)
        self.assertAlmostEqual(size, 4.0, places=5)

        # minimum size greater than the calculated size, so size should be limited to minSizeMM
        c.minSizeMM = 5
        c.minSizeMMEnabled = True
        size = r.convertToMapUnits(2, QgsUnitTypes.RenderMapUnits, c)
        self.assertAlmostEqual(size, 118.1102362, places=5)
        # only conversion from mapunits should be affected
        size = r.convertToMapUnits(2, QgsUnitTypes.RenderMillimeters, c)
        self.assertAlmostEqual(size, 47.244094, places=5)
        size = r.convertToMapUnits(5.66929, QgsUnitTypes.RenderPoints, c)
        self.assertAlmostEqual(size, 47.2440833, places=5)
        size = r.convertToMapUnits(5.66929, QgsUnitTypes.RenderInches, c)
        self.assertAlmostEqual(size, 3401.574, places=5)
        size = r.convertToMapUnits(2, QgsUnitTypes.RenderPixels, c)
        self.assertAlmostEqual(size, 4.0, places=5)
        c.minSizeMMEnabled = False

        # maximum size less than the calculated size, so size should be limited to maxSizeMM
        c.maxSizeMM = 0.05
        c.maxSizeMMEnabled = True
        size = r.convertToMapUnits(2, QgsUnitTypes.RenderMapUnits, c)
        self.assertAlmostEqual(size, 1.1811023622047245, places=5)
        # only conversion from mapunits should be affected
        size = r.convertToMapUnits(2, QgsUnitTypes.RenderMillimeters, c)
        self.assertAlmostEqual(size, 47.244094, places=5)
        size = r.convertToMapUnits(5.66929, QgsUnitTypes.RenderPoints, c)
        self.assertAlmostEqual(size, 47.2440833, places=5)
        size = r.convertToMapUnits(5.66929, QgsUnitTypes.RenderInches, c)
        self.assertAlmostEqual(size, 3401.574, places=5)
        size = r.convertToMapUnits(2, QgsUnitTypes.RenderPixels, c)
        self.assertAlmostEqual(size, 4.0, places=5)
        c.maxSizeMMEnabled = False

        # test with minimum scale set
        c.minScale = 150000000.0
        size = r.convertToMapUnits(2, QgsUnitTypes.RenderMapUnits, c)
        self.assertAlmostEqual(size, 15.57001821, places=5)
        # only conversion from mapunits should be affected
        size = r.convertToMapUnits(2, QgsUnitTypes.RenderMillimeters, c)
        self.assertAlmostEqual(size, 47.244094, places=5)
        size = r.convertToMapUnits(5.66929, QgsUnitTypes.RenderPoints, c)
        self.assertAlmostEqual(size, 47.2440833, places=5)
        size = r.convertToMapUnits(5.66929, QgsUnitTypes.RenderInches, c)
        self.assertAlmostEqual(size, 3401.574, places=5)
        size = r.convertToMapUnits(2, QgsUnitTypes.RenderPixels, c)
        self.assertAlmostEqual(size, 4.0, places=5)
        c.minScale = 0

        # test with maximum scale set
        c.maxScale = 1550000000.0
        size = r.convertToMapUnits(2, QgsUnitTypes.RenderMapUnits, c)
        self.assertAlmostEqual(size, 1.50677595625, places=5)
        # only conversion from mapunits should be affected
        size = r.convertToMapUnits(2, QgsUnitTypes.RenderMillimeters, c)
        self.assertAlmostEqual(size, 47.244094, places=5)
        size = r.convertToMapUnits(5.66929, QgsUnitTypes.RenderPoints, c)
        self.assertAlmostEqual(size, 47.2440833, places=5)
        size = r.convertToMapUnits(5.66929, QgsUnitTypes.RenderInches, c)
        self.assertAlmostEqual(size, 3401.574, places=5)
        size = r.convertToMapUnits(2, QgsUnitTypes.RenderPixels, c)
        self.assertAlmostEqual(size, 4.0, places=5)
        c.maxScale = 0
Ejemplo n.º 7
0
    def testEquality(self):
        # test equality operator

        c1 = QgsMapUnitScale(0.0001, 0.005)
        c1.minSizeMMEnabled = True
        c1.minSizeMM = 3
        c1.maxSizeMMEnabled = True
        c1.maxSizeMM = 8
        c2 = QgsMapUnitScale(0.0001, 0.005)
        c2.minSizeMMEnabled = True
        c2.minSizeMM = 3
        c2.maxSizeMMEnabled = True
        c2.maxSizeMM = 8
        self.assertEqual(c1, c2)

        c2.minScale = 0.0004
        self.assertNotEqual(c1, c2)
        c2.minScale = 0.0001

        c2.maxScale = 0.007
        self.assertNotEqual(c1, c2)
        c2.maxScale = 0.005

        c2.minSizeMMEnabled = False
        self.assertNotEqual(c1, c2)
        c2.minSizeMMEnabled = True

        c2.maxSizeMMEnabled = False
        self.assertNotEqual(c1, c2)
        c2.maxSizeMMEnabled = True

        c2.minSizeMM = 1
        self.assertNotEqual(c1, c2)
        c2.minSizeMM = 3

        c2.maxSizeMM = 100
        self.assertNotEqual(c1, c2)
        c2.maxSizeMM = 8

        self.assertEqual(c1, c2)
Ejemplo n.º 8
0
    def testConvertToMapUnits(self):
        ms = QgsMapSettings()
        ms.setExtent(QgsRectangle(0, 0, 100, 100))
        ms.setOutputSize(QSize(100, 50))
        ms.setOutputDpi(300)
        r = QgsRenderContext.fromMapSettings(ms)

        # renderer scale should be about 1:291937841

        # start with no min/max scale
        c = QgsMapUnitScale()

        size = r.convertToMapUnits(2, QgsUnitTypes.RenderMapUnits, c)
        self.assertEqual(size, 2.0)
        self.assertEqual(
            r.convertFromMapUnits(size, QgsUnitTypes.RenderMapUnits), 2)
        size = r.convertToMapUnits(2, QgsUnitTypes.RenderMillimeters, c)
        self.assertAlmostEqual(size, 47.244094, places=5)
        self.assertEqual(
            r.convertFromMapUnits(size, QgsUnitTypes.RenderMillimeters), 2)
        size = r.convertToMapUnits(5.66929, QgsUnitTypes.RenderPoints, c)
        self.assertAlmostEqual(size, 47.2440833, places=5)
        self.assertAlmostEqual(
            r.convertFromMapUnits(size, QgsUnitTypes.RenderPoints), 5.66929, 4)
        size = r.convertToMapUnits(5.66929, QgsUnitTypes.RenderInches, c)
        self.assertAlmostEqual(size, 3401.574, places=5)
        self.assertAlmostEqual(
            r.convertFromMapUnits(size, QgsUnitTypes.RenderInches), 5.66929, 4)
        size = r.convertToMapUnits(2, QgsUnitTypes.RenderPixels, c)
        self.assertAlmostEqual(size, 4.0, places=5)
        self.assertAlmostEqual(
            r.convertFromMapUnits(size, QgsUnitTypes.RenderPixels), 2, 4)

        # minimum size greater than the calculated size, so size should be limited to minSizeMM
        c.minSizeMM = 5
        c.minSizeMMEnabled = True
        size = r.convertToMapUnits(2, QgsUnitTypes.RenderMapUnits, c)
        self.assertAlmostEqual(size, 118.1102362, places=5)
        # only conversion from mapunits should be affected
        size = r.convertToMapUnits(2, QgsUnitTypes.RenderMillimeters, c)
        self.assertAlmostEqual(size, 47.244094, places=5)
        size = r.convertToMapUnits(5.66929, QgsUnitTypes.RenderPoints, c)
        self.assertAlmostEqual(size, 47.2440833, places=5)
        size = r.convertToMapUnits(5.66929, QgsUnitTypes.RenderInches, c)
        self.assertAlmostEqual(size, 3401.574, places=5)
        size = r.convertToMapUnits(2, QgsUnitTypes.RenderPixels, c)
        self.assertAlmostEqual(size, 4.0, places=5)
        c.minSizeMMEnabled = False

        # maximum size less than the calculated size, so size should be limited to maxSizeMM
        c.maxSizeMM = 0.05
        c.maxSizeMMEnabled = True
        size = r.convertToMapUnits(2, QgsUnitTypes.RenderMapUnits, c)
        self.assertAlmostEqual(size, 1.1811023622047245, places=5)
        # only conversion from mapunits should be affected
        size = r.convertToMapUnits(2, QgsUnitTypes.RenderMillimeters, c)
        self.assertAlmostEqual(size, 47.244094, places=5)
        size = r.convertToMapUnits(5.66929, QgsUnitTypes.RenderPoints, c)
        self.assertAlmostEqual(size, 47.2440833, places=5)
        size = r.convertToMapUnits(5.66929, QgsUnitTypes.RenderInches, c)
        self.assertAlmostEqual(size, 3401.574, places=5)
        size = r.convertToMapUnits(2, QgsUnitTypes.RenderPixels, c)
        self.assertAlmostEqual(size, 4.0, places=5)
        c.maxSizeMMEnabled = False

        # test with minimum scale set
        c.minScale = 150000000.0
        size = r.convertToMapUnits(2, QgsUnitTypes.RenderMapUnits, c)
        self.assertAlmostEqual(size, 15.57001821, places=5)
        # only conversion from mapunits should be affected
        size = r.convertToMapUnits(2, QgsUnitTypes.RenderMillimeters, c)
        self.assertAlmostEqual(size, 47.244094, places=5)
        size = r.convertToMapUnits(5.66929, QgsUnitTypes.RenderPoints, c)
        self.assertAlmostEqual(size, 47.2440833, places=5)
        size = r.convertToMapUnits(5.66929, QgsUnitTypes.RenderInches, c)
        self.assertAlmostEqual(size, 3401.574, places=5)
        size = r.convertToMapUnits(2, QgsUnitTypes.RenderPixels, c)
        self.assertAlmostEqual(size, 4.0, places=5)
        c.minScale = 0

        # test with maximum scale set
        c.maxScale = 1550000000.0
        size = r.convertToMapUnits(2, QgsUnitTypes.RenderMapUnits, c)
        self.assertAlmostEqual(size, 1.50677595625, places=5)
        # only conversion from mapunits should be affected
        size = r.convertToMapUnits(2, QgsUnitTypes.RenderMillimeters, c)
        self.assertAlmostEqual(size, 47.244094, places=5)
        size = r.convertToMapUnits(5.66929, QgsUnitTypes.RenderPoints, c)
        self.assertAlmostEqual(size, 47.2440833, places=5)
        size = r.convertToMapUnits(5.66929, QgsUnitTypes.RenderInches, c)
        self.assertAlmostEqual(size, 3401.574, places=5)
        size = r.convertToMapUnits(2, QgsUnitTypes.RenderPixels, c)
        self.assertAlmostEqual(size, 4.0, places=5)
        c.maxScale = 0

        # with symbology reference scale
        c = QgsMapUnitScale()
        r.setSymbologyReferenceScale(1000)
        r.setRendererScale(1000)

        size = r.convertToMapUnits(2, QgsUnitTypes.RenderMapUnits, c)
        self.assertEqual(size, 2.0)
        self.assertEqual(
            r.convertFromMapUnits(size, QgsUnitTypes.RenderMapUnits), 2)
        size = r.convertToMapUnits(2, QgsUnitTypes.RenderMillimeters, c)
        self.assertAlmostEqual(size, 47.244094, places=5)
        self.assertEqual(
            r.convertFromMapUnits(size, QgsUnitTypes.RenderMillimeters), 2)
        size = r.convertToMapUnits(5.66929, QgsUnitTypes.RenderPoints, c)
        self.assertAlmostEqual(size, 47.2440833, places=5)
        self.assertAlmostEqual(
            r.convertFromMapUnits(size, QgsUnitTypes.RenderPoints), 5.66929, 4)
        size = r.convertToMapUnits(5.66929, QgsUnitTypes.RenderInches, c)
        self.assertAlmostEqual(size, 3401.574, places=5)
        self.assertAlmostEqual(
            r.convertFromMapUnits(size, QgsUnitTypes.RenderInches), 5.66929, 4)
        size = r.convertToMapUnits(2, QgsUnitTypes.RenderPixels, c)
        self.assertAlmostEqual(size, 4.0, places=5)
        self.assertAlmostEqual(
            r.convertFromMapUnits(size, QgsUnitTypes.RenderPixels), 2, 4)

        r.setRendererScale(2000)
        size = r.convertToMapUnits(2, QgsUnitTypes.RenderMapUnits, c)
        self.assertEqual(size, 2.0)
        self.assertEqual(
            r.convertFromMapUnits(size, QgsUnitTypes.RenderMapUnits), 2)
        size = r.convertToMapUnits(2, QgsUnitTypes.RenderMillimeters, c)
        self.assertAlmostEqual(size, 47.244094 * 2, places=5)
        self.assertEqual(
            r.convertFromMapUnits(size, QgsUnitTypes.RenderMillimeters), 2)
        size = r.convertToMapUnits(5.66929, QgsUnitTypes.RenderPoints, c)
        self.assertAlmostEqual(size, 47.2440833 * 2, places=5)
        self.assertAlmostEqual(
            r.convertFromMapUnits(size, QgsUnitTypes.RenderPoints), 5.66929, 4)
        size = r.convertToMapUnits(5.66929, QgsUnitTypes.RenderInches, c)
        self.assertAlmostEqual(size, 3401.574 * 2, places=5)
        self.assertAlmostEqual(
            r.convertFromMapUnits(size, QgsUnitTypes.RenderInches), 5.66929, 4)
        size = r.convertToMapUnits(2, QgsUnitTypes.RenderPixels, c)
        self.assertAlmostEqual(size, 4.0 * 2, places=5)
        self.assertAlmostEqual(
            r.convertFromMapUnits(size, QgsUnitTypes.RenderPixels), 2, 4)

        r.setRendererScale(500)
        size = r.convertToMapUnits(2, QgsUnitTypes.RenderMapUnits, c)
        self.assertEqual(size, 2.0)
        self.assertEqual(
            r.convertFromMapUnits(size, QgsUnitTypes.RenderMapUnits), 2)
        size = r.convertToMapUnits(2, QgsUnitTypes.RenderMillimeters, c)
        self.assertAlmostEqual(size, 47.244094 / 2, places=5)
        self.assertEqual(
            r.convertFromMapUnits(size, QgsUnitTypes.RenderMillimeters), 2)
        size = r.convertToMapUnits(5.66929, QgsUnitTypes.RenderPoints, c)
        self.assertAlmostEqual(size, 47.2440833 / 2, places=5)
        self.assertAlmostEqual(
            r.convertFromMapUnits(size, QgsUnitTypes.RenderPoints), 5.66929, 4)
        size = r.convertToMapUnits(5.66929, QgsUnitTypes.RenderInches, c)
        self.assertAlmostEqual(size, 3401.574 / 2, places=5)
        self.assertAlmostEqual(
            r.convertFromMapUnits(size, QgsUnitTypes.RenderInches), 5.66929, 4)
        size = r.convertToMapUnits(2, QgsUnitTypes.RenderPixels, c)
        self.assertAlmostEqual(size, 4.0 / 2, places=5)
        self.assertAlmostEqual(
            r.convertFromMapUnits(size, QgsUnitTypes.RenderPixels), 2, 4)
Ejemplo n.º 9
0
    def testEquality(self):
        # test equality operator

        c1 = QgsMapUnitScale(0.0001, 0.005)
        c1.minSizeMMEnabled = True
        c1.minSizeMM = 3
        c1.maxSizeMMEnabled = True
        c1.maxSizeMM = 8
        c2 = QgsMapUnitScale(0.0001, 0.005)
        c2.minSizeMMEnabled = True
        c2.minSizeMM = 3
        c2.maxSizeMMEnabled = True
        c2.maxSizeMM = 8
        self.assertEqual(c1, c2)

        c2.minScale = 0.0004
        self.assertNotEqual(c1, c2)
        c2.minScale = 0.0001

        c2.maxScale = 0.007
        self.assertNotEqual(c1, c2)
        c2.maxScale = 0.005

        c2.minSizeMMEnabled = False
        self.assertNotEqual(c1, c2)
        c2.minSizeMMEnabled = True

        c2.maxSizeMMEnabled = False
        self.assertNotEqual(c1, c2)
        c2.maxSizeMMEnabled = True

        c2.minSizeMM = 1
        self.assertNotEqual(c1, c2)
        c2.minSizeMM = 3

        c2.maxSizeMM = 100
        self.assertNotEqual(c1, c2)
        c2.maxSizeMM = 8

        self.assertEqual(c1, c2)
Ejemplo n.º 10
0
    def testEquality(self):
        # test equality operator

        c1 = QgsMapUnitScale(10000, 200)
        c1.minSizeMMEnabled = True
        c1.minSizeMM = 3
        c1.maxSizeMMEnabled = True
        c1.maxSizeMM = 8
        c2 = QgsMapUnitScale(10000, 200)
        c2.minSizeMMEnabled = True
        c2.minSizeMM = 3
        c2.maxSizeMMEnabled = True
        c2.maxSizeMM = 8
        self.assertEqual(c1, c2)

        c2.minScale = 2500.0
        self.assertNotEqual(c1, c2)
        c2.minScale = 10000

        c2.maxScale = 142.857
        self.assertNotEqual(c1, c2)
        c2.maxScale = 200

        c2.minSizeMMEnabled = False
        self.assertNotEqual(c1, c2)
        c2.minSizeMMEnabled = True

        c2.maxSizeMMEnabled = False
        self.assertNotEqual(c1, c2)
        c2.maxSizeMMEnabled = True

        c2.minSizeMM = 1
        self.assertNotEqual(c1, c2)
        c2.minSizeMM = 3

        c2.maxSizeMM = 100
        self.assertNotEqual(c1, c2)
        c2.maxSizeMM = 8

        self.assertEqual(c1, c2)
Ejemplo n.º 11
0
    def testBasic(self):
        renderer = QgsPointCloudRgbRenderer()
        renderer.setBlueAttribute('b')
        self.assertEqual(renderer.blueAttribute(), 'b')
        renderer.setGreenAttribute('g')
        self.assertEqual(renderer.greenAttribute(), 'g')
        renderer.setRedAttribute('r')
        self.assertEqual(renderer.redAttribute(), 'r')

        redce = QgsContrastEnhancement()
        redce.setMinimumValue(100)
        redce.setMaximumValue(120)
        redce.setContrastEnhancementAlgorithm(
            QgsContrastEnhancement.StretchAndClipToMinimumMaximum)
        renderer.setRedContrastEnhancement(redce)

        greence = QgsContrastEnhancement()
        greence.setMinimumValue(130)
        greence.setMaximumValue(150)
        greence.setContrastEnhancementAlgorithm(
            QgsContrastEnhancement.StretchToMinimumMaximum)
        renderer.setGreenContrastEnhancement(greence)

        bluece = QgsContrastEnhancement()
        bluece.setMinimumValue(170)
        bluece.setMaximumValue(190)
        bluece.setContrastEnhancementAlgorithm(
            QgsContrastEnhancement.ClipToMinimumMaximum)
        renderer.setBlueContrastEnhancement(bluece)

        renderer.setMaximumScreenError(18)
        renderer.setMaximumScreenErrorUnit(QgsUnitTypes.RenderInches)
        renderer.setPointSize(13)
        renderer.setPointSizeUnit(QgsUnitTypes.RenderPoints)
        renderer.setPointSizeMapUnitScale(QgsMapUnitScale(1000, 2000))

        rr = renderer.clone()
        self.assertEqual(rr.maximumScreenError(), 18)
        self.assertEqual(rr.maximumScreenErrorUnit(),
                         QgsUnitTypes.RenderInches)
        self.assertEqual(rr.pointSize(), 13)
        self.assertEqual(rr.pointSizeUnit(), QgsUnitTypes.RenderPoints)
        self.assertEqual(rr.pointSizeMapUnitScale().minScale, 1000)
        self.assertEqual(rr.pointSizeMapUnitScale().maxScale, 2000)

        self.assertEqual(rr.blueAttribute(), 'b')
        self.assertEqual(rr.greenAttribute(), 'g')
        self.assertEqual(rr.redAttribute(), 'r')
        self.assertEqual(rr.redContrastEnhancement().minimumValue(), 100)
        self.assertEqual(rr.redContrastEnhancement().maximumValue(), 120)
        self.assertEqual(
            rr.redContrastEnhancement().contrastEnhancementAlgorithm(),
            QgsContrastEnhancement.StretchAndClipToMinimumMaximum)
        self.assertEqual(rr.greenContrastEnhancement().minimumValue(), 130)
        self.assertEqual(rr.greenContrastEnhancement().maximumValue(), 150)
        self.assertEqual(
            rr.greenContrastEnhancement().contrastEnhancementAlgorithm(),
            QgsContrastEnhancement.StretchToMinimumMaximum)
        self.assertEqual(rr.blueContrastEnhancement().minimumValue(), 170)
        self.assertEqual(rr.blueContrastEnhancement().maximumValue(), 190)
        self.assertEqual(
            rr.blueContrastEnhancement().contrastEnhancementAlgorithm(),
            QgsContrastEnhancement.ClipToMinimumMaximum)

        doc = QDomDocument("testdoc")
        elem = renderer.save(doc, QgsReadWriteContext())

        r2 = QgsPointCloudRgbRenderer.create(elem, QgsReadWriteContext())
        self.assertEqual(r2.maximumScreenError(), 18)
        self.assertEqual(r2.maximumScreenErrorUnit(),
                         QgsUnitTypes.RenderInches)
        self.assertEqual(r2.pointSize(), 13)
        self.assertEqual(r2.pointSizeUnit(), QgsUnitTypes.RenderPoints)
        self.assertEqual(r2.pointSizeMapUnitScale().minScale, 1000)
        self.assertEqual(r2.pointSizeMapUnitScale().maxScale, 2000)

        self.assertEqual(r2.blueAttribute(), 'b')
        self.assertEqual(r2.greenAttribute(), 'g')
        self.assertEqual(r2.redAttribute(), 'r')
        self.assertEqual(r2.redContrastEnhancement().minimumValue(), 100)
        self.assertEqual(r2.redContrastEnhancement().maximumValue(), 120)
        self.assertEqual(
            r2.redContrastEnhancement().contrastEnhancementAlgorithm(),
            QgsContrastEnhancement.StretchAndClipToMinimumMaximum)
        self.assertEqual(r2.greenContrastEnhancement().minimumValue(), 130)
        self.assertEqual(r2.greenContrastEnhancement().maximumValue(), 150)
        self.assertEqual(
            r2.greenContrastEnhancement().contrastEnhancementAlgorithm(),
            QgsContrastEnhancement.StretchToMinimumMaximum)
        self.assertEqual(r2.blueContrastEnhancement().minimumValue(), 170)
        self.assertEqual(r2.blueContrastEnhancement().maximumValue(), 190)
        self.assertEqual(
            r2.blueContrastEnhancement().contrastEnhancementAlgorithm(),
            QgsContrastEnhancement.ClipToMinimumMaximum)
Ejemplo n.º 12
0
    def testCondenseFillAndOutline(self):
        """
        Test QgsSymbolLayerUtils.condenseFillAndOutline
        """
        self.assertFalse(QgsSymbolLayerUtils.condenseFillAndOutline(None, None))

        # not simple fill or line
        self.assertFalse(QgsSymbolLayerUtils.condenseFillAndOutline(QgsShapeburstFillSymbolLayer(), QgsSimpleLineSymbolLayer()))
        self.assertFalse(QgsSymbolLayerUtils.condenseFillAndOutline(QgsSimpleFillSymbolLayer(), QgsMarkerLineSymbolLayer()))

        # simple fill/line
        fill = QgsSimpleFillSymbolLayer()
        line = QgsSimpleLineSymbolLayer()

        # set incompatible settings on outline
        line.setUseCustomDashPattern(True)
        self.assertFalse(QgsSymbolLayerUtils.condenseFillAndOutline(fill, line))

        line = QgsSimpleLineSymbolLayer()
        line.setDashPatternOffset(1)
        self.assertFalse(QgsSymbolLayerUtils.condenseFillAndOutline(fill, line))

        line = QgsSimpleLineSymbolLayer()
        line.setAlignDashPattern(True)
        self.assertFalse(QgsSymbolLayerUtils.condenseFillAndOutline(fill, line))

        line = QgsSimpleLineSymbolLayer()
        line.setTweakDashPatternOnCorners(True)
        self.assertFalse(QgsSymbolLayerUtils.condenseFillAndOutline(fill, line))

        line = QgsSimpleLineSymbolLayer()
        line.setTrimDistanceStart(1)
        self.assertFalse(QgsSymbolLayerUtils.condenseFillAndOutline(fill, line))

        line = QgsSimpleLineSymbolLayer()
        line.setTrimDistanceEnd(1)
        self.assertFalse(QgsSymbolLayerUtils.condenseFillAndOutline(fill, line))

        line = QgsSimpleLineSymbolLayer()
        line.setDrawInsidePolygon(True)
        self.assertFalse(QgsSymbolLayerUtils.condenseFillAndOutline(fill, line))

        line = QgsSimpleLineSymbolLayer()
        line.setRingFilter(QgsSimpleLineSymbolLayer.ExteriorRingOnly)
        self.assertFalse(QgsSymbolLayerUtils.condenseFillAndOutline(fill, line))

        line = QgsSimpleLineSymbolLayer()
        line.setOffset(1)
        self.assertFalse(QgsSymbolLayerUtils.condenseFillAndOutline(fill, line))

        line = QgsSimpleLineSymbolLayer()
        line.setDataDefinedProperty(QgsSymbolLayer.PropertyTrimEnd, QgsProperty.fromValue(4))
        self.assertFalse(QgsSymbolLayerUtils.condenseFillAndOutline(fill, line))

        # compatible!
        line = QgsSimpleLineSymbolLayer()
        line.setColor(QColor(255, 0, 0))
        line.setWidth(1.2)
        line.setWidthUnit(QgsUnitTypes.RenderPoints)
        line.setWidthMapUnitScale(QgsMapUnitScale(1, 2))
        line.setPenJoinStyle(Qt.MiterJoin)
        line.setPenStyle(Qt.DashDotDotLine)
        self.assertTrue(QgsSymbolLayerUtils.condenseFillAndOutline(fill, line))

        self.assertEqual(fill.strokeColor(), QColor(255, 0, 0))
        self.assertEqual(fill.strokeWidth(), 1.2)
        self.assertEqual(fill.strokeWidthUnit(), QgsUnitTypes.RenderPoints)
        self.assertEqual(fill.strokeWidthMapUnitScale(), QgsMapUnitScale(1, 2))
        self.assertEqual(fill.penJoinStyle(), Qt.MiterJoin)
        self.assertEqual(fill.strokeStyle(), Qt.DashDotDotLine)
Ejemplo n.º 13
0
    def test_line_settings(self):
        """
        Test line settings
        """
        settings = QgsLabelLineSettings()
        settings.setPlacementFlags(QgsLabeling.LinePlacementFlag.OnLine)
        self.assertEqual(settings.placementFlags(),
                         QgsLabeling.LinePlacementFlag.OnLine)
        settings.setPlacementFlags(
            QgsLabeling.LinePlacementFlag.OnLine
            | QgsLabeling.LinePlacementFlag.MapOrientation)
        self.assertEqual(
            settings.placementFlags(), QgsLabeling.LinePlacementFlag.OnLine
            | QgsLabeling.LinePlacementFlag.MapOrientation)

        settings.setMergeLines(True)
        self.assertTrue(settings.mergeLines())
        settings.setMergeLines(False)
        self.assertFalse(settings.mergeLines())

        settings.setAddDirectionSymbol(True)
        self.assertTrue(settings.addDirectionSymbol())
        settings.setAddDirectionSymbol(False)
        self.assertFalse(settings.addDirectionSymbol())
        settings.setLeftDirectionSymbol('left')
        self.assertEqual(settings.leftDirectionSymbol(), 'left')
        settings.setRightDirectionSymbol('right')
        self.assertEqual(settings.rightDirectionSymbol(), 'right')
        settings.setReverseDirectionSymbol(True)
        self.assertTrue(settings.reverseDirectionSymbol())
        settings.setReverseDirectionSymbol(False)
        self.assertFalse(settings.reverseDirectionSymbol())

        settings.setDirectionSymbolPlacement(
            QgsLabelLineSettings.DirectionSymbolPlacement.SymbolBelow)
        self.assertEqual(
            settings.directionSymbolPlacement(),
            QgsLabelLineSettings.DirectionSymbolPlacement.SymbolBelow)
        settings.setDirectionSymbolPlacement(
            QgsLabelLineSettings.DirectionSymbolPlacement.SymbolAbove)
        self.assertEqual(
            settings.directionSymbolPlacement(),
            QgsLabelLineSettings.DirectionSymbolPlacement.SymbolAbove)

        settings.setOverrunDistance(5.6)
        self.assertEqual(settings.overrunDistance(), 5.6)
        settings.setOverrunDistanceUnit(QgsUnitTypes.RenderInches)
        self.assertEqual(settings.overrunDistanceUnit(),
                         QgsUnitTypes.RenderInches)
        scale = QgsMapUnitScale(1, 2)
        settings.setOverrunDistanceMapUnitScale(scale)
        self.assertEqual(settings.overrunDistanceMapUnitScale().minScale, 1)
        self.assertEqual(settings.overrunDistanceMapUnitScale().maxScale, 2)

        settings.setLineAnchorPercent(0.3)
        self.assertEqual(settings.lineAnchorPercent(), 0.3)

        # check that compatibility code works
        pal_settings = QgsPalLayerSettings()
        pal_settings.placementFlags = QgsPalLayerSettings.OnLine | QgsPalLayerSettings.MapOrientation
        self.assertEqual(pal_settings.placementFlags, 9)
        self.assertTrue(
            pal_settings.lineSettings().placementFlags(),
            QgsLabeling.LinePlacementFlag.OnLine
            | QgsLabeling.LinePlacementFlag.MapOrientation)

        pal_settings.mergeLines = True
        self.assertTrue(pal_settings.mergeLines)
        self.assertTrue(pal_settings.lineSettings().mergeLines())
        pal_settings.mergeLines = False
        self.assertFalse(pal_settings.mergeLines)
        self.assertFalse(pal_settings.lineSettings().mergeLines())

        pal_settings.addDirectionSymbol = True
        self.assertTrue(pal_settings.addDirectionSymbol)
        self.assertTrue(pal_settings.lineSettings().addDirectionSymbol())
        pal_settings.addDirectionSymbol = False
        self.assertFalse(pal_settings.addDirectionSymbol)
        self.assertFalse(pal_settings.lineSettings().addDirectionSymbol())

        pal_settings.leftDirectionSymbol = 'l'
        self.assertEqual(pal_settings.leftDirectionSymbol, 'l')
        self.assertEqual(pal_settings.lineSettings().leftDirectionSymbol(),
                         'l')
        pal_settings.rightDirectionSymbol = 'r'
        self.assertEqual(pal_settings.rightDirectionSymbol, 'r')
        self.assertEqual(pal_settings.lineSettings().rightDirectionSymbol(),
                         'r')

        pal_settings.reverseDirectionSymbol = True
        self.assertTrue(pal_settings.reverseDirectionSymbol)
        self.assertTrue(pal_settings.lineSettings().reverseDirectionSymbol())
        pal_settings.reverseDirectionSymbol = False
        self.assertFalse(pal_settings.reverseDirectionSymbol)
        self.assertFalse(pal_settings.lineSettings().reverseDirectionSymbol())

        pal_settings.placeDirectionSymbol = QgsPalLayerSettings.SymbolAbove
        self.assertEqual(pal_settings.placeDirectionSymbol, 1)
        self.assertTrue(
            pal_settings.lineSettings().directionSymbolPlacement(),
            QgsLabelLineSettings.DirectionSymbolPlacement.SymbolAbove)

        pal_settings.overrunDistance = 4.2
        self.assertEqual(pal_settings.overrunDistance, 4.2)
        self.assertTrue(pal_settings.lineSettings().overrunDistance(), 4.2)

        pal_settings.overrunDistanceUnit = QgsUnitTypes.RenderInches
        self.assertEqual(pal_settings.overrunDistanceUnit,
                         QgsUnitTypes.RenderInches)
        self.assertTrue(pal_settings.lineSettings().overrunDistanceUnit(),
                        QgsUnitTypes.RenderInches)
        pal_settings.overrunDistanceMapUnitScale = scale
        self.assertEqual(pal_settings.overrunDistanceMapUnitScale.minScale, 1)
        self.assertEqual(pal_settings.overrunDistanceMapUnitScale.maxScale, 2)
        self.assertTrue(
            pal_settings.lineSettings().overrunDistanceMapUnitScale().minScale,
            1)
        self.assertTrue(
            pal_settings.lineSettings().overrunDistanceMapUnitScale().maxScale,
            2)
Ejemplo n.º 14
0
    def testConvertToPainterUnits(self):
        # test QgsSymbolLayerUtils::convertToPainterUnits() using QgsMapUnitScale

        ms = QgsMapSettings()
        ms.setExtent(QgsRectangle(0, 0, 100, 100))
        ms.setOutputSize(QSize(100, 50))
        ms.setOutputDpi(300)
        r = QgsRenderContext.fromMapSettings(ms)

        # renderer scale should be about 1:291937841

        # start with no min/max scale
        c = QgsMapUnitScale()

        size = QgsSymbolLayerUtils.convertToPainterUnits(
            r, 2, QgsUnitTypes.RenderMapUnits, c)
        self.assertAlmostEqual(size, 1.0, places=5)
        size = QgsSymbolLayerUtils.convertToPainterUnits(
            r, 2, QgsUnitTypes.RenderMillimeters, c)
        self.assertAlmostEqual(size, 23.622047, places=5)
        size = QgsSymbolLayerUtils.convertToPainterUnits(
            r, 2, QgsUnitTypes.RenderPoints, c)
        self.assertAlmostEqual(size, 66.9601332, places=5)
        size = QgsSymbolLayerUtils.convertToPainterUnits(
            r, 2, QgsUnitTypes.RenderPixels, c)
        self.assertAlmostEqual(size, 2.0, places=5)

        # minimum size greater than the calculated size, so size should be limited to minSizeMM
        c.minSizeMM = 5
        c.minSizeMMEnabled = True
        size = QgsSymbolLayerUtils.convertToPainterUnits(
            r, 2, QgsUnitTypes.RenderMapUnits, c)
        self.assertAlmostEqual(size, 59.0551181, places=5)
        # only conversion from mapunits should be affected
        size = QgsSymbolLayerUtils.convertToPainterUnits(
            r, 2, QgsUnitTypes.RenderMillimeters, c)
        self.assertAlmostEqual(size, 23.622047, places=5)
        size = QgsSymbolLayerUtils.convertToPainterUnits(
            r, 2, QgsUnitTypes.RenderPoints, c)
        self.assertAlmostEqual(size, 66.9601332, places=5)
        size = QgsSymbolLayerUtils.convertToPainterUnits(
            r, 2, QgsUnitTypes.RenderPixels, c)
        self.assertAlmostEqual(size, 2.0, places=5)
        c.minSizeMMEnabled = False

        # maximum size less than the calculated size, so size should be limited to maxSizeMM
        c.maxSizeMM = 0.1
        c.maxSizeMMEnabled = True
        size = QgsSymbolLayerUtils.convertToPainterUnits(
            r, 2, QgsUnitTypes.RenderMapUnits, c)
        self.assertAlmostEqual(size, 1.0, places=5)
        # only conversion from mapunits should be affected
        size = QgsSymbolLayerUtils.convertToPainterUnits(
            r, 2, QgsUnitTypes.RenderMillimeters, c)
        self.assertAlmostEqual(size, 23.622047, places=5)
        size = QgsSymbolLayerUtils.convertToPainterUnits(
            r, 2, QgsUnitTypes.RenderPoints, c)
        self.assertAlmostEqual(size, 66.9601332, places=5)
        size = QgsSymbolLayerUtils.convertToPainterUnits(
            r, 2, QgsUnitTypes.RenderPixels, c)
        self.assertAlmostEqual(size, 2.0, places=5)
Ejemplo n.º 15
0
    def testBasic(self):
        renderer = QgsPointCloudAttributeByRampRenderer()
        renderer.setAttribute('attr')
        self.assertEqual(renderer.attribute(), 'attr')
        renderer.setMinimum(5)
        self.assertEqual(renderer.minimum(), 5)
        renderer.setMaximum(15)
        self.assertEqual(renderer.maximum(), 15)
        ramp = QgsStyle.defaultStyle().colorRamp("Viridis")
        shader = QgsColorRampShader(20, 30, ramp)
        renderer.setColorRampShader(shader)
        self.assertEqual(renderer.colorRampShader().minimumValue(), 20)
        self.assertEqual(renderer.colorRampShader().maximumValue(), 30)

        renderer.setMaximumScreenError(18)
        renderer.setMaximumScreenErrorUnit(QgsUnitTypes.RenderInches)
        renderer.setPointSize(13)
        renderer.setPointSizeUnit(QgsUnitTypes.RenderPoints)
        renderer.setPointSizeMapUnitScale(QgsMapUnitScale(1000, 2000))

        rr = renderer.clone()
        self.assertEqual(rr.maximumScreenError(), 18)
        self.assertEqual(rr.maximumScreenErrorUnit(),
                         QgsUnitTypes.RenderInches)
        self.assertEqual(rr.pointSize(), 13)
        self.assertEqual(rr.pointSizeUnit(), QgsUnitTypes.RenderPoints)
        self.assertEqual(rr.pointSizeMapUnitScale().minScale, 1000)
        self.assertEqual(rr.pointSizeMapUnitScale().maxScale, 2000)

        self.assertEqual(rr.attribute(), 'attr')
        self.assertEqual(rr.minimum(), 5)
        self.assertEqual(rr.maximum(), 15)
        self.assertEqual(rr.colorRampShader().minimumValue(), 20)
        self.assertEqual(rr.colorRampShader().maximumValue(), 30)
        self.assertEqual(
            rr.colorRampShader().sourceColorRamp().color1().name(),
            renderer.colorRampShader().sourceColorRamp().color1().name())
        self.assertEqual(
            rr.colorRampShader().sourceColorRamp().color2().name(),
            renderer.colorRampShader().sourceColorRamp().color2().name())

        doc = QDomDocument("testdoc")
        elem = renderer.save(doc, QgsReadWriteContext())

        r2 = QgsPointCloudAttributeByRampRenderer.create(
            elem, QgsReadWriteContext())
        self.assertEqual(r2.maximumScreenError(), 18)
        self.assertEqual(r2.maximumScreenErrorUnit(),
                         QgsUnitTypes.RenderInches)
        self.assertEqual(r2.pointSize(), 13)
        self.assertEqual(r2.pointSizeUnit(), QgsUnitTypes.RenderPoints)
        self.assertEqual(r2.pointSizeMapUnitScale().minScale, 1000)
        self.assertEqual(r2.pointSizeMapUnitScale().maxScale, 2000)
        self.assertEqual(r2.attribute(), 'attr')
        self.assertEqual(r2.minimum(), 5)
        self.assertEqual(r2.maximum(), 15)
        self.assertEqual(r2.colorRampShader().minimumValue(), 20)
        self.assertEqual(r2.colorRampShader().maximumValue(), 30)
        self.assertEqual(
            r2.colorRampShader().sourceColorRamp().color1().name(),
            renderer.colorRampShader().sourceColorRamp().color1().name())
        self.assertEqual(
            r2.colorRampShader().sourceColorRamp().color2().name(),
            renderer.colorRampShader().sourceColorRamp().color2().name())
Ejemplo n.º 16
0
    def testEquality(self):
        # test equality operator

        c1 = QgsMapUnitScale(10000, 200)
        c1.minSizeMMEnabled = True
        c1.minSizeMM = 3
        c1.maxSizeMMEnabled = True
        c1.maxSizeMM = 8
        c2 = QgsMapUnitScale(10000, 200)
        c2.minSizeMMEnabled = True
        c2.minSizeMM = 3
        c2.maxSizeMMEnabled = True
        c2.maxSizeMM = 8
        self.assertEqual(c1, c2)

        c2.minScale = 2500.0
        self.assertNotEqual(c1, c2)
        c2.minScale = 10000

        c2.maxScale = 142.857
        self.assertNotEqual(c1, c2)
        c2.maxScale = 200

        c2.minSizeMMEnabled = False
        self.assertNotEqual(c1, c2)
        c2.minSizeMMEnabled = True

        c2.maxSizeMMEnabled = False
        self.assertNotEqual(c1, c2)
        c2.maxSizeMMEnabled = True

        c2.minSizeMM = 1
        self.assertNotEqual(c1, c2)
        c2.minSizeMM = 3

        c2.maxSizeMM = 100
        self.assertNotEqual(c1, c2)
        c2.maxSizeMM = 8

        self.assertEqual(c1, c2)
Ejemplo n.º 17
0
    def testMapUnitsPerPixel(self):
        # test computeMapUnitsPerPixel

        ms = QgsMapSettings()
        ms.setExtent(QgsRectangle(0, 0, 100, 100))
        ms.setOutputSize(QSize(100, 50))
        ms.setOutputDpi(75)
        r = QgsRenderContext.fromMapSettings(ms)

        # renderer scale should be about 1:291937841

        # start with no min/max scale
        c = QgsMapUnitScale()

        mup = c.computeMapUnitsPerPixel(r)
        self.assertAlmostEqual(mup, 2.0, places=5)

        # add a minimum scale less than the renderer scale, so should be no change
        c.minScale = 1 / 350000000.0
        mup = c.computeMapUnitsPerPixel(r)
        self.assertAlmostEqual(mup, 2.0, places=5)

        # minimum scale greater than the renderer scale, so should be limited to minScale
        c.minScale = 1 / 150000000.0
        mup = c.computeMapUnitsPerPixel(r)
        self.assertAlmostEqual(mup, 1.0276160, places=5)
        c.minScale = 1 / 50000000.0
        mup = c.computeMapUnitsPerPixel(r)
        self.assertAlmostEqual(mup, 0.3425386, places=5)
        c.minScale = 1 / 350000000.0

        # add a maximum scale greater than the renderer scale, so should be no change
        c.maxScale = 1 / 150000000.0
        mup = c.computeMapUnitsPerPixel(r)
        self.assertAlmostEqual(mup, 2.0, places=5)

        # maximum scale less than the renderer scale, so should be limited to maxScale
        c.maxScale = 1 / 350000000.0
        mup = c.computeMapUnitsPerPixel(r)
        self.assertAlmostEqual(mup, 2.3977706, places=5)
        c.maxScale = 1 / 500000000.0
        mup = c.computeMapUnitsPerPixel(r)
        self.assertAlmostEqual(mup, 3.4253867, places=5)

        # test resetting to min/max
        c.minScale = 0
        c.maxScale = 0
        mup = c.computeMapUnitsPerPixel(r)
        self.assertAlmostEqual(mup, 2.0, places=5)
Ejemplo n.º 18
0
    def testSizeMapUnitScale(self):
        # test sizeMapUnitScale and setSizeMapUnitScale

        # create a marker symbol with a single layer
        markerSymbol = QgsMarkerSymbol()
        markerSymbol.deleteSymbolLayer(0)
        markerSymbol.appendSymbolLayer(
            QgsSimpleMarkerSymbolLayer(QgsSimpleMarkerSymbolLayerBase.Star,
                                       color=QColor(255, 0, 0),
                                       strokeColor=QColor(0, 255, 0),
                                       size=10))
        markerSymbol.symbolLayer(0).setSizeMapUnitScale(
            QgsMapUnitScale(10000, 20000))
        self.assertEqual(markerSymbol.sizeMapUnitScale(),
                         QgsMapUnitScale(10000, 20000))
        markerSymbol.setSizeMapUnitScale(QgsMapUnitScale(1000, 2000))
        self.assertEqual(markerSymbol.sizeMapUnitScale(),
                         QgsMapUnitScale(1000, 2000))
        self.assertEqual(
            markerSymbol.symbolLayer(0).sizeMapUnitScale(),
            QgsMapUnitScale(1000, 2000))

        # add additional layers
        markerSymbol.appendSymbolLayer(
            QgsSimpleMarkerSymbolLayer(QgsSimpleMarkerSymbolLayerBase.Star,
                                       color=QColor(255, 0, 0),
                                       strokeColor=QColor(0, 255, 0),
                                       size=10))
        markerSymbol.appendSymbolLayer(
            QgsSimpleMarkerSymbolLayer(QgsSimpleMarkerSymbolLayerBase.Star,
                                       color=QColor(255, 0, 0),
                                       strokeColor=QColor(0, 255, 0),
                                       size=30))
        # should take first layer's map unit scale
        self.assertEqual(markerSymbol.sizeMapUnitScale(),
                         QgsMapUnitScale(1000, 2000))
        markerSymbol.setSizeMapUnitScale(QgsMapUnitScale(3000, 4000))
        self.assertEqual(markerSymbol.sizeMapUnitScale(),
                         QgsMapUnitScale(3000, 4000))
        # all layers should have size unit set
        self.assertEqual(
            markerSymbol.symbolLayer(0).sizeMapUnitScale(),
            QgsMapUnitScale(3000, 4000))
        self.assertEqual(
            markerSymbol.symbolLayer(1).sizeMapUnitScale(),
            QgsMapUnitScale(3000, 4000))
        self.assertEqual(
            markerSymbol.symbolLayer(2).sizeMapUnitScale(),
            QgsMapUnitScale(3000, 4000))
Ejemplo n.º 19
0
    def testConvertToMapUnits(self):
        # test QgsSymbolLayerUtils::convertToMapUnits() using QgsMapUnitScale

        ms = QgsMapSettings()
        ms.setExtent(QgsRectangle(0, 0, 100, 100))
        ms.setOutputSize(QSize(100, 50))
        ms.setOutputDpi(300)
        r = QgsRenderContext.fromMapSettings(ms)

        # renderer scale should be about 1:291937841

        # start with no min/max scale
        c = QgsMapUnitScale()

        size = QgsSymbolLayerUtils.convertToMapUnits(r, 2, QgsUnitTypes.RenderMapUnits, c)
        self.assertEqual(size, 2.0)
        size = QgsSymbolLayerUtils.convertToMapUnits(r, 2, QgsUnitTypes.RenderMillimeters, c)
        self.assertAlmostEqual(size, 47.244094, places=5)
        size = QgsSymbolLayerUtils.convertToMapUnits(r, 5.66929, QgsUnitTypes.RenderPoints, c)
        self.assertAlmostEqual(size, 47.2440833, places=5)
        size = QgsSymbolLayerUtils.convertToMapUnits(r, 2, QgsUnitTypes.RenderPixels, c)
        self.assertAlmostEqual(size, 4.0, places=5)

        # minimum size greater than the calculated size, so size should be limited to minSizeMM
        c.minSizeMM = 5
        c.minSizeMMEnabled = True
        size = QgsSymbolLayerUtils.convertToMapUnits(r, 2, QgsUnitTypes.RenderMapUnits, c)
        self.assertAlmostEqual(size, 118.1102362, places=5)
        # only conversion from mapunits should be affected
        size = QgsSymbolLayerUtils.convertToMapUnits(r, 2, QgsUnitTypes.RenderMillimeters, c)
        self.assertAlmostEqual(size, 47.244094, places=5)
        size = QgsSymbolLayerUtils.convertToMapUnits(r, 5.66929, QgsUnitTypes.RenderPoints, c)
        self.assertAlmostEqual(size, 47.2440833, places=5)
        size = QgsSymbolLayerUtils.convertToMapUnits(r, 2, QgsUnitTypes.RenderPixels, c)
        self.assertAlmostEqual(size, 4.0, places=5)
        c.minSizeMMEnabled = False

        # maximum size less than the calculated size, so size should be limited to maxSizeMM
        c.maxSizeMM = 0.05
        c.maxSizeMMEnabled = True
        size = QgsSymbolLayerUtils.convertToMapUnits(r, 2, QgsUnitTypes.RenderMapUnits, c)
        self.assertAlmostEqual(size, 1.1811023622047245, places=5)
        # only conversion from mapunits should be affected
        size = QgsSymbolLayerUtils.convertToMapUnits(r, 2, QgsUnitTypes.RenderMillimeters, c)
        self.assertAlmostEqual(size, 47.244094, places=5)
        size = QgsSymbolLayerUtils.convertToMapUnits(r, 5.66929, QgsUnitTypes.RenderPoints, c)
        self.assertAlmostEqual(size, 47.2440833, places=5)
        size = QgsSymbolLayerUtils.convertToMapUnits(r, 2, QgsUnitTypes.RenderPixels, c)
        self.assertAlmostEqual(size, 4.0, places=5)
        c.maxSizeMMEnabled = False

        # test with minimum scale set
        c.minScale = 1 / 150000000.0
        size = QgsSymbolLayerUtils.convertToMapUnits(r, 2, QgsUnitTypes.RenderMapUnits, c)
        self.assertAlmostEqual(size, 15.57001821, places=5)
        # only conversion from mapunits should be affected
        size = QgsSymbolLayerUtils.convertToMapUnits(r, 2, QgsUnitTypes.RenderMillimeters, c)
        self.assertAlmostEqual(size, 47.244094, places=5)
        size = QgsSymbolLayerUtils.convertToMapUnits(r, 5.66929, QgsUnitTypes.RenderPoints, c)
        self.assertAlmostEqual(size, 47.2440833, places=5)
        size = QgsSymbolLayerUtils.convertToMapUnits(r, 2, QgsUnitTypes.RenderPixels, c)
        self.assertAlmostEqual(size, 4.0, places=5)
        c.minScale = 0

        # test with maximum scale set
        c.maxScale = 1 / 1550000000.0
        size = QgsSymbolLayerUtils.convertToMapUnits(r, 2, QgsUnitTypes.RenderMapUnits, c)
        self.assertAlmostEqual(size, 1.50677595625, places=5)
        # only conversion from mapunits should be affected
        size = QgsSymbolLayerUtils.convertToMapUnits(r, 2, QgsUnitTypes.RenderMillimeters, c)
        self.assertAlmostEqual(size, 47.244094, places=5)
        size = QgsSymbolLayerUtils.convertToMapUnits(r, 5.66929, QgsUnitTypes.RenderPoints, c)
        self.assertAlmostEqual(size, 47.2440833, places=5)
        size = QgsSymbolLayerUtils.convertToMapUnits(r, 2, QgsUnitTypes.RenderPixels, c)
        self.assertAlmostEqual(size, 4.0, places=5)
        c.maxScale = 0
Ejemplo n.º 20
0
    def testMapUnitsPerPixel(self):
        # test computeMapUnitsPerPixel

        ms = QgsMapSettings()
        ms.setExtent(QgsRectangle(0, 0, 100, 100))
        ms.setOutputSize(QSize(100, 50))
        r = QgsRenderContext.fromMapSettings(ms)

        # renderer scale should be about 1:291937841

        # start with no min/max scale
        c = QgsMapUnitScale()

        mup = c.computeMapUnitsPerPixel(r)
        self.assertAlmostEqual(mup, 2.0, places=5)

        # add a minimum scale less than the renderer scale, so should be no change
        c.minScale = 1 / 350000000.0
        mup = c.computeMapUnitsPerPixel(r)
        self.assertAlmostEqual(mup, 2.0, places=5)

        # minimum scale greater than the renderer scale, so should be limited to minScale
        c.minScale = 1 / 150000000.0
        mup = c.computeMapUnitsPerPixel(r)
        self.assertAlmostEqual(mup, 1.0276160, places=5)
        c.minScale = 1 / 50000000.0
        mup = c.computeMapUnitsPerPixel(r)
        self.assertAlmostEqual(mup, 0.3425386, places=5)
        c.minScale = 1 / 350000000.0

        # add a maximum scale greater than the renderer scale, so should be no change
        c.maxScale = 1 / 150000000.0
        mup = c.computeMapUnitsPerPixel(r)
        self.assertAlmostEqual(mup, 2.0, places=5)

        # maximum scale less than the renderer scale, so should be limited to maxScale
        c.maxScale = 1 / 350000000.0
        mup = c.computeMapUnitsPerPixel(r)
        self.assertAlmostEqual(mup, 2.3977706, places=5)
        c.maxScale = 1 / 500000000.0
        mup = c.computeMapUnitsPerPixel(r)
        self.assertAlmostEqual(mup, 3.4253867, places=5)

        # test resetting to min/max
        c.minScale = 0
        c.maxScale = 0
        mup = c.computeMapUnitsPerPixel(r)
        self.assertAlmostEqual(mup, 2.0, places=5)
Ejemplo n.º 21
0
    def testConvertSingleUnit(self):
        ms = QgsMapSettings()
        ms.setExtent(QgsRectangle(0, 0, 100, 100))
        ms.setOutputSize(QSize(100, 50))
        ms.setOutputDpi(300)
        r = QgsRenderContext.fromMapSettings(ms)

        # renderer scale should be about 1:291937841

        # start with no min/max scale
        c = QgsMapUnitScale()
        # self.assertEqual(r.scaleFactor(),666)

        sf = r.convertToPainterUnits(1, QgsUnitTypes.RenderMapUnits, c)
        self.assertAlmostEqual(sf, 0.5, places=5)
        sf = r.convertToPainterUnits(1, QgsUnitTypes.RenderMillimeters, c)
        self.assertAlmostEqual(sf, 11.8110236, places=5)
        sf = r.convertToPainterUnits(1, QgsUnitTypes.RenderPoints, c)
        self.assertAlmostEqual(sf, 4.166666665625, places=5)
        sf = r.convertToPainterUnits(1, QgsUnitTypes.RenderInches, c)
        self.assertAlmostEqual(sf, 300.0, places=5)
        sf = r.convertToPainterUnits(1, QgsUnitTypes.RenderPixels, c)
        self.assertAlmostEqual(sf, 1.0, places=5)

        # minimum scale greater than the renderer scale, so should be limited to minScale
        c.minScale = 150000000.0
        sf = r.convertToPainterUnits(1, QgsUnitTypes.RenderMapUnits, c)
        self.assertAlmostEqual(sf, 3.89250455, places=5)
        # only conversion from mapunits should be affected
        sf = r.convertToPainterUnits(1, QgsUnitTypes.RenderMillimeters, c)
        self.assertAlmostEqual(sf, 11.8110236, places=5)
        sf = r.convertToPainterUnits(1, QgsUnitTypes.RenderPoints, c)
        self.assertAlmostEqual(sf, 4.166666665625, places=5)
        sf = r.convertToPainterUnits(1, QgsUnitTypes.RenderInches, c)
        self.assertAlmostEqual(sf, 300.0, places=5)
        sf = r.convertToPainterUnits(1, QgsUnitTypes.RenderPixels, c)
        self.assertAlmostEqual(sf, 1.0, places=5)
        c.minScale = 0

        # maximum scale less than the renderer scale, so should be limited to maxScale
        c.maxScale = 350000000.0
        sf = r.convertToPainterUnits(1, QgsUnitTypes.RenderMapUnits, c)
        self.assertAlmostEqual(sf, 0.5, places=5)
        # only conversion from mapunits should be affected
        sf = r.convertToPainterUnits(1, QgsUnitTypes.RenderMillimeters, c)
        self.assertAlmostEqual(sf, 11.8110236, places=5)
        sf = r.convertToPainterUnits(1, QgsUnitTypes.RenderPoints, c)
        self.assertAlmostEqual(sf, 4.166666665625, places=5)
        sf = r.convertToPainterUnits(1, QgsUnitTypes.RenderInches, c)
        self.assertAlmostEqual(sf, 300.0, places=5)
        sf = r.convertToPainterUnits(1, QgsUnitTypes.RenderPixels, c)
        self.assertAlmostEqual(sf, 1.0, places=5)

        # with symbologyReferenceScale set
        c = QgsMapUnitScale()
        r.setSymbologyReferenceScale(1000)
        r.setRendererScale(1000)
        sf = r.convertToPainterUnits(1, QgsUnitTypes.RenderMapUnits, c)
        self.assertAlmostEqual(sf, 0.5, places=5)
        sf = r.convertToPainterUnits(1, QgsUnitTypes.RenderMillimeters, c)
        self.assertAlmostEqual(sf, 11.8110236, places=5)
        sf = r.convertToPainterUnits(1, QgsUnitTypes.RenderPoints, c)
        self.assertAlmostEqual(sf, 4.166666665625, places=5)
        sf = r.convertToPainterUnits(1, QgsUnitTypes.RenderInches, c)
        self.assertAlmostEqual(sf, 300.0, places=5)
        sf = r.convertToPainterUnits(1, QgsUnitTypes.RenderPixels, c)
        self.assertAlmostEqual(sf, 1.0, places=5)

        r.setRendererScale(2000)
        sf = r.convertToPainterUnits(1, QgsUnitTypes.RenderMapUnits, c)
        self.assertAlmostEqual(sf, 0.5 / 2, places=5)
        sf = r.convertToPainterUnits(1, QgsUnitTypes.RenderMillimeters, c)
        self.assertAlmostEqual(sf, 11.8110236 / 2, places=5)
        sf = r.convertToPainterUnits(1, QgsUnitTypes.RenderPoints, c)
        self.assertAlmostEqual(sf, 4.166666665625 / 2, places=5)
        sf = r.convertToPainterUnits(1, QgsUnitTypes.RenderInches, c)
        self.assertAlmostEqual(sf, 300.0 / 2, places=5)
        sf = r.convertToPainterUnits(1, QgsUnitTypes.RenderPixels, c)
        self.assertAlmostEqual(sf, 1.0 / 2, places=5)

        r.setRendererScale(500)
        sf = r.convertToPainterUnits(1, QgsUnitTypes.RenderMapUnits, c)
        self.assertAlmostEqual(sf, 0.5 * 2, places=5)
        sf = r.convertToPainterUnits(1, QgsUnitTypes.RenderMillimeters, c)
        self.assertAlmostEqual(sf, 11.8110236 * 2, places=5)
        sf = r.convertToPainterUnits(1, QgsUnitTypes.RenderPoints, c)
        self.assertAlmostEqual(sf, 4.166666665625 * 2, places=5)
        sf = r.convertToPainterUnits(1, QgsUnitTypes.RenderInches, c)
        self.assertAlmostEqual(sf, 300.0 * 2, places=5)
        sf = r.convertToPainterUnits(1, QgsUnitTypes.RenderPixels, c)
        self.assertAlmostEqual(sf, 1.0 * 2, places=5)