def create_line(ly, ry, right_to_left=False):
' Create path that represents upper or lower line of change marker '
line = QPainterPath()
if not right_to_left:
line.moveTo(0, ly)
line.cubicTo(C, ly, w - C, ry, w, ry)
else:
line.moveTo(w, ry)
line.cubicTo(w - C, ry, C, ly, 0, ly)
return line
def wavy_path(width, height, y_origin):
half_height = height / 2
path = QPainterPath()
pi2 = math.pi * 2
num = 100
num_waves = 4
wav_limit = num // num_waves
sin = math.sin
path.reserve(num)
for i in range(num):
x = width * i / num
rads = pi2 * (i % wav_limit) / wav_limit
factor = sin(rads)
y = y_origin + factor * half_height
path.lineTo(x, y) if i else path.moveTo(x, y)
return path
def paintEvent(self, event):
QSplitterHandle.paintEvent(self, event)
left, right = self.parent().left, self.parent().right
painter = QPainter(self)
painter.setClipRect(event.rect())
w = self.width()
h = self.height()
painter.setRenderHints(QPainter.RenderHint.Antialiasing, True)
C = 16 # Curve factor.
def create_line(ly, ry, right_to_left=False):
' Create path that represents upper or lower line of change marker '
line = QPainterPath()
if not right_to_left:
line.moveTo(0, ly)
line.cubicTo(C, ly, w - C, ry, w, ry)
else:
line.moveTo(w, ry)
line.cubicTo(w - C, ry, C, ly, 0, ly)
return line
ldoc, rdoc = left.document(), right.document()
lorigin, rorigin = left.contentOffset(), right.contentOffset()
lfv, rfv = left.firstVisibleBlock().blockNumber(), right.firstVisibleBlock().blockNumber()
lines = []
for (ltop, lbot, kind), (rtop, rbot, kind) in zip(left.changes, right.changes):
if lbot < lfv and rbot < rfv:
continue
ly_top = left.blockBoundingGeometry(ldoc.findBlockByNumber(ltop)).translated(lorigin).y()
ly_bot = left.blockBoundingGeometry(ldoc.findBlockByNumber(lbot)).translated(lorigin).y()
ry_top = right.blockBoundingGeometry(rdoc.findBlockByNumber(rtop)).translated(rorigin).y()
ry_bot = right.blockBoundingGeometry(rdoc.findBlockByNumber(rbot)).translated(rorigin).y()
if max(ly_top, ly_bot, ry_top, ry_bot) < 0:
continue
if min(ly_top, ly_bot, ry_top, ry_bot) > h:
break
upper_line = create_line(ly_top, ry_top)
lower_line = create_line(ly_bot, ry_bot, True)
region = QPainterPath()
region.moveTo(0, ly_top)
region.connectPath(upper_line)
region.lineTo(w, ry_bot)
region.connectPath(lower_line)
region.closeSubpath()
painter.fillPath(region, left.diff_backgrounds[kind])
for path, aa in zip((upper_line, lower_line), (ly_top != ry_top, ly_bot != ry_bot)):
lines.append((kind, path, aa))
for kind, path, aa in sorted(lines, key=lambda x:{'replace':0}.get(x[0], 1)):
painter.setPen(left.diff_foregrounds[kind])
painter.setRenderHints(QPainter.RenderHint.Antialiasing, aa)
painter.drawPath(path)
painter.setFont(left.heading_font)
for (lnum, text), (rnum, text) in zip(left.headers, right.headers):
ltop, lbot, rtop, rbot = lnum, lnum + 3, rnum, rnum + 3
if lbot < lfv and rbot < rfv:
continue
ly_top = left.blockBoundingGeometry(ldoc.findBlockByNumber(ltop)).translated(lorigin).y()
ly_bot = left.blockBoundingGeometry(ldoc.findBlockByNumber(lbot)).translated(lorigin).y()
ry_top = right.blockBoundingGeometry(rdoc.findBlockByNumber(rtop)).translated(rorigin).y()
ry_bot = right.blockBoundingGeometry(rdoc.findBlockByNumber(rbot)).translated(rorigin).y()
if max(ly_top, ly_bot, ry_top, ry_bot) < 0:
continue
if min(ly_top, ly_bot, ry_top, ry_bot) > h:
break
ly = painter.boundingRect(3, ly_top, left.width(), ly_bot - ly_top - 5, Qt.TextFlag.TextSingleLine, text).bottom() + 3
ry = painter.boundingRect(3, ry_top, right.width(), ry_bot - ry_top - 5, Qt.TextFlag.TextSingleLine, text).bottom() + 3
line = create_line(ly, ry)
painter.setPen(QPen(left.palette().text(), 2))
painter.setRenderHints(QPainter.RenderHint.Antialiasing, ly != ry)
painter.drawPath(line)
painter.end()
# Paint the splitter without the change lines if the mouse is over the
# splitter
if getattr(self, 'hover', False):
QSplitterHandle.paintEvent(self, event)
def svg_path_to_painter_path(d):
'''
Convert a tiny SVG 1.2 path into a QPainterPath.
:param d: The value of the d attribute of an SVG <path> tag
'''
from qt.core import QPainterPath
cmd = last_cmd = b''
path = QPainterPath()
moveto_abs, moveto_rel = b'M', b'm'
closepath1, closepath2 = b'Z', b'z'
lineto_abs, lineto_rel = b'L', b'l'
hline_abs, hline_rel = b'H', b'h'
vline_abs, vline_rel = b'V', b'v'
curveto_abs, curveto_rel = b'C', b'c'
smoothcurveto_abs, smoothcurveto_rel = b'S', b's'
quadcurveto_abs, quadcurveto_rel = b'Q', b'q'
smoothquadcurveto_abs, smoothquadcurveto_rel = b'T', b't'
# Store the last parsed values
# x/y = end position
# x1/y1 and x2/y2 = bezier control points
x = y = x1 = y1 = x2 = y2 = 0
if isinstance(d, unicode_type):
d = d.encode('ascii')
d = d.replace(b',', b' ').replace(b'\n', b' ')
end = len(d)
pos = [0]
def read_byte():
p = pos[0]
pos[0] += 1
return d[p:p+1]
def parse_float():
chars = []
while pos[0] < end:
c = read_byte()
if c == b' ' and not chars:
continue
if c in b'-.0123456789':
chars.append(c)
else:
break
if not chars:
raise ValueError('Premature end of input while expecting a number')
return float(b''.join(chars))
def parse_floats(num, x_offset=0, y_offset=0):
for i in range(num):
val = parse_float()
yield val + (x_offset if i % 2 == 0 else y_offset)
repeated_command = None
while pos[0] < end:
last_cmd = cmd
cmd = read_byte() if repeated_command is None else repeated_command
repeated_command = None
if cmd == b' ':
continue
if cmd == moveto_abs:
x, y = parse_float(), parse_float()
path.moveTo(x, y)
elif cmd == moveto_rel:
x += parse_float()
y += parse_float()
path.moveTo(x, y)
elif cmd == closepath1 or cmd == closepath2:
path.closeSubpath()
elif cmd == lineto_abs:
x, y = parse_floats(2)
path.lineTo(x, y)
elif cmd == lineto_rel:
x += parse_float()
y += parse_float()
path.lineTo(x, y)
elif cmd == hline_abs:
x = parse_float()
path.lineTo(x, y)
elif cmd == hline_rel:
x += parse_float()
path.lineTo(x, y)
elif cmd == vline_abs:
y = parse_float()
path.lineTo(x, y)
elif cmd == vline_rel:
y += parse_float()
path.lineTo(x, y)
elif cmd == curveto_abs:
x1, y1, x2, y2, x, y = parse_floats(6)
path.cubicTo(x1, y1, x2, y2, x, y)
elif cmd == curveto_rel:
x1, y1, x2, y2, x, y = parse_floats(6, x, y)
path.cubicTo(x1, y1, x2, y2, x, y)
elif cmd == smoothcurveto_abs:
if last_cmd == curveto_abs or last_cmd == curveto_rel or last_cmd == smoothcurveto_abs or last_cmd == smoothcurveto_rel:
x1 = 2 * x - x2
y1 = 2 * y - y2
else:
x1, y1 = x, y
x2, y2, x, y = parse_floats(4)
path.cubicTo(x1, y1, x2, y2, x, y)
elif cmd == smoothcurveto_rel:
if last_cmd == curveto_abs or last_cmd == curveto_rel or last_cmd == smoothcurveto_abs or last_cmd == smoothcurveto_rel:
x1 = 2 * x - x2
y1 = 2 * y - y2
else:
x1, y1 = x, y
x2, y2, x, y = parse_floats(4, x, y)
path.cubicTo(x1, y1, x2, y2, x, y)
elif cmd == quadcurveto_abs:
x1, y1, x, y = parse_floats(4)
path.quadTo(x1, y1, x, y)
elif cmd == quadcurveto_rel:
x1, y1, x, y = parse_floats(4, x, y)
path.quadTo(x1, y1, x, y)
elif cmd == smoothquadcurveto_abs:
if last_cmd in (quadcurveto_abs, quadcurveto_rel, smoothquadcurveto_abs, smoothquadcurveto_rel):
x1 = 2 * x - x1
y1 = 2 * y - y1
else:
x1, y1 = x, y
x, y = parse_floats(2)
path.quadTo(x1, y1, x, y)
elif cmd == smoothquadcurveto_rel:
if last_cmd in (quadcurveto_abs, quadcurveto_rel, smoothquadcurveto_abs, smoothquadcurveto_rel):
x1 = 2 * x - x1
y1 = 2 * y - y1
else:
x1, y1 = x, y
x, y = parse_floats(2, x, y)
path.quadTo(x1, y1, x, y)
elif cmd in b'-.0123456789':
# A new number begins
# In this case, multiple parameters tuples are specified for the last command
# We rewind to reparse data correctly
pos[0] -= 1
# Handle extra parameters
if last_cmd == moveto_abs:
repeated_command = cmd = lineto_abs
elif last_cmd == moveto_rel:
repeated_command = cmd = lineto_rel
elif last_cmd in (closepath1, closepath2):
raise ValueError('Extra parameters after close path command')
elif last_cmd in (
lineto_abs, lineto_rel, hline_abs, hline_rel, vline_abs,
vline_rel, curveto_abs, curveto_rel,smoothcurveto_abs,
smoothcurveto_rel, quadcurveto_abs, quadcurveto_rel,
smoothquadcurveto_abs, smoothquadcurveto_rel
):
repeated_command = cmd = last_cmd
else:
raise ValueError('Unknown path command: %s' % cmd)
return path
