def test11RegridRectToCurvPatch(self):
'''
Tests the CurvRectRegridder.regridRectToCurv method using patch regridding
'''
# Mark as the last test so ESMPControl().stopESMP will be called
self.last_test = True
regridder = CurvRectRegridder()
# Test with only center data, and flags only on curvilinear centers,
# using patch regridding
regridder.createCurvGrid(self.curv_center_lons, self.curv_center_lats,
self.curv_center_ignr)
regridder.assignCurvField()
regridder.createRectGrid(self.rect_center_lons, self.rect_center_lats)
regridder.assignRectField(self.rect_data)
regrid_data = regridder.regridRectToCurv(self.undef_val,
ESMP.ESMP_REGRIDMETHOD_PATCH)
expect_data = numpy.array(self.curv_data, dtype=numpy.float64)
undef_flags = numpy.array(self.curv_center_ignr, dtype=numpy.bool)
expect_data[undef_flags] = self.undef_val
mismatch_found = False
# Ignore outermost edges of curvilinear grid since
# they aren't really well covered by the rectilinear grid
# Also ignore the second east-most edge and second south-most edge;
# also not covered
for i in xrange(1, expect_data.shape[0] - 2):
for j in xrange(2, expect_data.shape[1] - 1):
if numpy.abs(expect_data[i, j] - regrid_data[i, j]) > 0.0011:
mismatch_found = True
print "expect = %#6.4f, found = %#6.4f for lon = %7.3f, " \
"lat = %7.3f" % (expect_data[i, j], regrid_data[i, j],
self.curv_center_lons[i][j], self.curv_center_lats[i][j])
if mismatch_found:
self.fail("data mismatch found")
def test08RegridCurvToRectPatch(self):
'''
Tests the CurvRectRegridder.regridCurvToRect method using patch regridding
'''
regridder = CurvRectRegridder()
# Test with only center data, and flags only on rectilinear centers,
# using patch regridding
regridder.createCurvGrid(self.curv_center_lons, self.curv_center_lats)
regridder.assignCurvField(self.curv_data)
regridder.createRectGrid(self.rect_center_lons, self.rect_center_lats,
self.rect_center_ignr)
regridder.assignRectField()
regrid_data = regridder.regridCurvToRect(self.undef_val,
ESMP.ESMP_REGRIDMETHOD_PATCH)
expect_data = numpy.array(self.rect_data, dtype=numpy.float64)
undef_flags = numpy.array(self.rect_center_ignr, dtype=numpy.bool)
expect_data[undef_flags] = self.undef_val
# one point falls outside the curvilinear centerpoints grid?
expect_data[5, 0] = self.undef_val
mismatch_found = False
for i in xrange(expect_data.shape[0]):
for j in xrange(expect_data.shape[1]):
if numpy.abs(expect_data[i, j] - regrid_data[i, j]) > 0.0011:
mismatch_found = True
print "expect = %#6.4f, found = %#6.4f for lon = %5.1f, " \
"lat = %5.1f" % (expect_data[i, j], regrid_data[i, j],
self.rect_center_lons[i], self.rect_center_lats[j])
if mismatch_found:
self.fail("data mismatch found")
def test10RegridRectToCurvBilinear(self):
'''
Tests the CurvRectRegridder.regridRectToCurv method using bilinear regridding
'''
regridder = CurvRectRegridder()
# Test with only center data and no flags, using bilinear regridding
regridder.createCurvGrid(self.curv_center_lons, self.curv_center_lats)
regridder.assignCurvField()
regridder.createRectGrid(self.rect_center_lons, self.rect_center_lats)
regridder.assignRectField(self.rect_data)
regrid_data = regridder.regridRectToCurv(self.undef_val,
ESMP.ESMP_REGRIDMETHOD_BILINEAR)
expect_data = numpy.array(self.curv_data, dtype=numpy.float64)
mismatch_found = False
# Ignore outermost edges of curvilinear grid since
# they aren't really well covered by the rectilinear grid
# Also ignore the second east-most edge and second south-most edge;
# also not covered
for i in xrange(1, expect_data.shape[0] - 2):
for j in xrange(2, expect_data.shape[1] - 1):
if numpy.abs(expect_data[i, j] - regrid_data[i, j]) > 0.0003:
mismatch_found = True
print "expect = %#6.4f, found = %#6.4f for lon = %7.3f, " \
"lat = %7.3f" % (expect_data[i, j], regrid_data[i, j],
self.curv_center_lons[i][j], self.curv_center_lats[i][j])
if mismatch_found:
self.fail("data mismatch found")
def test07RegridCurvToRectBilinear(self):
'''
Tests the CurvRectRegridder.regridCurvToRect method using bilinear regridding
'''
regridder = CurvRectRegridder()
# Test with only center data and no flags, using bilinear regridding
regridder.createCurvGrid(self.curv_center_lons, self.curv_center_lats)
regridder.assignCurvField(self.curv_data)
regridder.createRectGrid(self.rect_center_lons, self.rect_center_lats)
regridder.assignRectField()
regrid_data = regridder.regridCurvToRect(self.undef_val,
ESMP.ESMP_REGRIDMETHOD_BILINEAR)
expect_data = numpy.array(self.rect_data, dtype=numpy.float64)
mismatch_found = False
# one point falls outside the curvilinear centerpoints grid?
expect_data[5, 0] = self.undef_val
for i in xrange(expect_data.shape[0]):
for j in xrange(expect_data.shape[1]):
if numpy.abs(expect_data[i, j] - regrid_data[i, j]) > 0.0003:
mismatch_found = True
print "expect = %#6.4f, found = %#6.4f for lon = %5.1f, " \
"lat = %5.1f" % (expect_data[i, j], regrid_data[i, j],
self.rect_center_lons[i], self.rect_center_lats[j])
if mismatch_found:
self.fail("data mismatch found")
def test06RegridCurvToRectConserve(self):
'''
Tests the CurvRectRegridder.regridCurvToRect method using conservative regridding
'''
regridder = CurvRectRegridder()
# Test with all corner and center data, using conservative regridding
regridder.createCurvGrid(self.curv_center_lons, self.curv_center_lats,
self.curv_center_ignr, self.curv_corner_lons,
self.curv_corner_lats, self.curv_corner_ignr)
regridder.assignCurvField(self.curv_data)
regridder.createRectGrid(self.rect_center_lons, self.rect_center_lats,
self.rect_center_ignr, self.rect_corner_lons,
self.rect_corner_lats, self.rect_corner_ignr)
regridder.assignRectField()
regrid_data = regridder.regridCurvToRect(self.undef_val,
ESMP.ESMP_REGRIDMETHOD_CONSERVE)
expect_data = numpy.array(self.rect_data, dtype=numpy.float64)
undef_flags = numpy.array(self.rect_center_ignr, dtype=numpy.bool)
expect_data[undef_flags] = self.undef_val
mismatch_found = False
# Couple "good" points next to ignored data area are a bit wonky
expect_data[2, 0] = self.undef_val
regrid_data[2, 0] = self.undef_val
expect_data[2, 1] = self.undef_val
regrid_data[2, 1] = self.undef_val
for i in xrange(expect_data.shape[0]):
for j in xrange(expect_data.shape[1]):
if numpy.abs(expect_data[i, j] - regrid_data[i, j]) > 0.0007:
mismatch_found = True
print "expect = %#6.4f, found = %#6.4f for lon = %5.1f, " \
"lat = %5.1f" % (expect_data[i, j], regrid_data[i, j],
self.rect_center_lons[i], self.rect_center_lats[j])
if mismatch_found:
self.fail("data mismatch found")
def test09RegridRectToCurvConserve(self):
'''
Tests the CurvRectRegridder.regridRectToCurv method using conservative regridding
'''
regridder = CurvRectRegridder()
# Test with all corner and center data, using conservative regridding
regridder.createCurvGrid(self.curv_center_lons, self.curv_center_lats,
self.curv_center_ignr, self.curv_corner_lons,
self.curv_corner_lats, self.curv_corner_ignr)
regridder.assignCurvField()
regridder.createRectGrid(self.rect_center_lons, self.rect_center_lats,
self.rect_center_ignr, self.rect_corner_lons,
self.rect_corner_lats, self.rect_corner_ignr)
regridder.assignRectField(self.rect_data)
regrid_data = regridder.regridRectToCurv(self.undef_val,
ESMP.ESMP_REGRIDMETHOD_CONSERVE)
expect_data = numpy.array(self.curv_data, dtype=numpy.float64)
undef_flags = numpy.array(self.curv_center_ignr, dtype=numpy.bool)
expect_data[undef_flags] = self.undef_val
# Couple "good" points next to ignored area are a bit wonky
expect_data[1, 3] = self.undef_val
regrid_data[1, 3] = self.undef_val
expect_data[2, 3] = self.undef_val
regrid_data[2, 3] = self.undef_val
mismatch_found = False
# Ignore outermost edges of curvilinear grid since
# they aren't really well covered by the rectilinear grid
# Also ignore the second east-most edge;
# also not well covered and errors are larger
for i in xrange(1, expect_data.shape[0] - 2):
for j in xrange(1, expect_data.shape[1] - 1):
if numpy.abs(expect_data[i, j] - regrid_data[i, j]) > 0.0004:
mismatch_found = True
print "expect = %#6.4f, found = %#6.4f for lon = %7.3f, " \
"lat = %7.3f" % (expect_data[i, j], regrid_data[i, j],
self.curv_center_lons[i][j], self.curv_center_lats[i][j])
if mismatch_found:
self.fail("data mismatch found")
def test05AssignRectField(self):
'''
Tests the CurvRectRegridder.assignRectGrid method.
Since nothing is returned from this method, just
checks for unexpected/expected Errors being raised.
'''
regridder = CurvRectRegridder()
# Test with all corner and center data
regridder.createRectGrid(self.rect_center_lons, self.rect_center_lats,
self.rect_center_ignr, self.rect_corner_lons,
self.rect_corner_lats, self.rect_corner_ignr)
regridder.assignRectField(self.rect_data)
regridder.assignRectField()
# Test without flags
regridder.createRectGrid(self.rect_center_lons, self.rect_center_lats,
None, self.rect_corner_lons, self.rect_corner_lats)
regridder.assignRectField()
regridder.assignRectField(self.rect_data)
# Test without corners
regridder.createRectGrid(self.rect_center_lons, self.rect_center_lats,
self.rect_center_ignr)
regridder.assignRectField()
regridder.assignRectField(self.rect_data)
# Test without corners or flags
regridder.createRectGrid(self.rect_center_lons, self.rect_center_lats)
regridder.assignRectField(self.rect_data)
regridder.assignRectField()
# TODO: Test invalid cases
# Done with this regridder
regridder.finalize()
# Create the curvilinear grid with corner and center points
regridder.createCurvGrid(curv_center_lons, curv_center_lats, curv_center_ignore,
curv_corner_lons, curv_corner_lats, None)
# curv_corner_lons, curv_corner_lats, curv_corner_ignore)
# Create the rectilinear grid with corner and center points
regridder.createRectGrid(rect_center_lons, rect_center_lats, rect_center_ignore,
rect_corner_lons, rect_corner_lats, None)
# rect_corner_lons, rect_corner_lats, rect_corner_ignore)
# Create the curvilinear source field
regridder.assignCurvField(curv_data)
# Create the rectilinear destination field
regridder.assignRectField(None)
# Generate the 2D rectilinear longitudes and latitudes arrays only to
# simplify printing differences; not used for regridding
rect_2d_center_lats, rect_2d_center_lons = \
numpy.meshgrid(rect_center_lats, rect_center_lons)
# Regrid from curvilinear to rectilinear using the bilinear method
rect_regrid_data = regridder.regridCurvToRect(undef_val, ESMP.ESMP_REGRIDMETHOD_BILINEAR)
# Print the differences between the expected and regrid data
print ""
print "analytic (expect) versus bilinear regridded (found) differences"
printDiffs(rect_2d_center_lons, rect_2d_center_lats, undef_val, max_negl,
rect_expect_data, rect_regrid_data)
# Regrid from curvilinear to rectilinear using the patch method