def test_tearing_down_subarray(subscriber_mock, resource_mock, watch_mock):
the_waiter = waiter()
the_waiter.set_wait_for_tearing_down_subarray()
assert_that(resource_mock.call_count).is_equal_to(5)
#assert_that(subscriber_mock.call_count).is_equal_to(5+4)
#assert_that(watch_mock.call_count).is_equal_to(5+4)
the_waiter.wait()
def wrapper(*args, **kwargs):
check_going_out_of_configured()
the_waiter = waiter()
the_waiter.set_wait_for_going_into_scanning()
result = func(*args, **kwargs)
the_waiter.wait()
return result
def wrapper(*args, **kwargs):
check_going_out_of_configured()
the_waiter = waiter()
the_waiter.set_wait_for_ending_SB()
result = func(*args, **kwargs)
the_waiter.wait(200)
return result
def teardown_function(function):
""" teardown any state that was previously setup with a setup_function
call.
"""
if (resource('ska_mid/tm_subarray_node/1').get("State") == "ON"):
the_waiter = waiter()
the_waiter.set_wait_for_tearing_down_subarray()
SubArray(1).deallocate()
the_waiter.wait()
LOGGER.info(the_waiter.logs)
if (resource('ska_mid/tm_subarray_node/1').get("State") == "OFF"):
the_waiter = waiter()
the_waiter.set_wait_for_going_to_standby()
SKAMid().standby()
the_waiter.wait()
LOGGER.info(the_waiter.logs)
def wrapper(*args, **kwargs):
check_coming_out_of_standby()
the_waiter = waiter()
the_waiter.set_wait_for_starting_up()
result = func(*args, **kwargs)
the_waiter.wait(50)
return result
def wrapper(*args, **kwargs):
check_going_out_of_abort()
the_waiter = waiter()
the_waiter.set_wait_for_going_into_obsreset()
result = func(*args, **kwargs)
the_waiter.wait(100)
return result
def wrapper(*args, **kwargs):
check_going_into_standby()
the_waiter = waiter()
the_waiter.set_wait_for_going_to_standby()
result = func(*args, **kwargs)
the_waiter.wait(100)
return result
def start_up():
the_waiter = waiter()
the_waiter.set_wait_for_starting_up()
SKAMid().start_up()
the_waiter.wait()
LOGGER.info("Telescope Started up")
LOGGER.debug("the_waiter.logs")
def teardown_function(function):
""" teardown any state that was previously setup with a setup_function
call.
"""
the_waiter = waiter()
if (resource('ska_mid/tm_subarray_node/1').get('obsState') == "IDLE"):
the_waiter.set_wait_for_tearing_down_subarray()
LOGGER.info("tearing down composed subarray (IDLE)")
SubArray(1).deallocate()
the_waiter.wait()
LOGGER.info(the_waiter.logs)
if (resource('ska_mid/tm_subarray_node/1').get('obsState') == "READY"):
LOGGER.info("tearing down configured subarray (READY)")
the_waiter.set_wait_for_ending_SB()
SubArray(1).end_sb()
the_waiter.wait()
LOGGER.info(the_waiter.logs)
the_waiter.set_wait_for_tearing_down_subarray()
SubArray(1).deallocate()
the_waiter.wait()
LOGGER.info(the_waiter.logs)
if (resource('ska_mid/tm_subarray_node/1').get('obsState') == "CONFIGURING"):
LOGGER.info("tearing down configuring subarray")
restart_subarray(1)
if (resource('ska_mid/tm_subarray_node/1').get('obsState') == "SCANNING"):
LOGGER.info("tearing down scanning subarray")
restart_subarray(1)
the_waiter.set_wait_for_going_to_standby()
SKAMid().standby()
LOGGER.info("standby command is executed on telescope")
the_waiter.wait()
LOGGER.info(the_waiter.logs)
def wrapper(*args, **kwargs):
print("In sync_release_resources")
check_going_into_empty()
the_waiter = waiter()
the_waiter.set_wait_for_tearing_down_subarray()
result = func(*args, **kwargs)
the_waiter.wait(150)
return result
def wrapper(*args, **kwargs):
check_going_out_of_empty()
the_waiter = waiter()
the_waiter.set_wait_for_assign_resources(
nr_of_receptors=nr_of_receptors)
################
result = func(*args, **kwargs)
################
the_waiter.wait(timeout=timeout)
return result
def compose_sub():
resource("ska_mid/tm_subarray_node/1").assert_attribute("State").equals(
"ON")
resource("ska_mid/tm_subarray_node/1").assert_attribute("obsState").equals(
"EMPTY")
assign_resources_file = "resources/test_data/TMC_integration/assign_resources1.json"
sdp_block = update_resource_config_file(assign_resources_file)
LOGGER.info("_______sdp_block________" + str(sdp_block))
config = load_config_from_file(assign_resources_file)
CentralNode = DeviceProxy("ska_mid/tm_central/central_node")
CentralNode.AssignResources(config)
the_waiter = waiter()
the_waiter.wait()
LOGGER.info("Invoked AssignResources on CentralNode")
return sdp_block
def set_telescope_to_running(disable_waiting=False):
the_waiter = waiter()
the_waiter.set_wait_for_starting_up()
# TODO: Using TMC API for TelescopeOn command.
# Telescope().start_up()
CentralNode = DeviceProxy("ska_mid/tm_central/central_node")
LOGGER.info("Before Sending TelescopeOn command on CentralNode state :" +
str(CentralNode.telescopeState))
CentralNode.TelescopeOn()
the_waiter.wait(5000)
if not disable_waiting:
the_waiter.wait(8000)
if the_waiter.timed_out:
pytest.fail("timed out whilst starting up telescope:\n {}".format(
the_waiter.logs))
def compose_sub():
resource('ska_mid/tm_subarray_node/1').assert_attribute('State').equals(
'ON')
resource('ska_mid/tm_subarray_node/1').assert_attribute('obsState').equals(
'EMPTY')
assign_resources_file = download_test_data(
"mid_assign_resources_v1.json",
"skampi-test-data/tmc-integration/assign-resources")
sdp_block = update_resource_config_file(assign_resources_file)
LOGGER.info("_______sdp_block________" + str(sdp_block))
config = load_config_from_file(assign_resources_file)
os.remove(assign_resources_file)
CentralNode = DeviceProxy('ska_mid/tm_central/central_node')
CentralNode.AssignResources(config)
the_waiter = waiter()
the_waiter.wait()
LOGGER.info('Invoked AssignResources on CentralNode')
return sdp_block
def restart_subarray(id):
devices = device_to_subarrays.keys()
filtered_devices = [
device for device in devices if device_to_subarrays[device] == id
]
the_waiter = waiter()
the_waiter.set_wait_for_going_to_standby()
exceptions_raised = ""
LOGGER.info("Inside restart subarray method.")
for device in filtered_devices:
try:
resource(device).restart()
LOGGER.info("Restart subarray API invoked on device :" +
str(device))
except Exception as e:
exceptions_raised += f"\nException raised on reseting {device}:{e}"
if exceptions_raised != "":
raise Exception(f"Error in initialising devices:{exceptions_raised}")
the_waiter.wait()
def set_telescope_to_standby():
the_waiter = waiter()
the_waiter.set_wait_for_going_to_standby()
# TODO: Using TMC API for TelescopeOff command.
# Telescope().standby()
CentralNode = DeviceProxy("ska_mid/tm_central/central_node")
CentralNode.TelescopeOff()
LOGGER.info("After Standby CentralNode State:" +
str(CentralNode.telescopeState))
LOGGER.info("Standby the Telescope")
# It is observed that CSP and CBF subarrays sometimes take more than 8 sec to change the State to DISABLE
# therefore timeout is given as 12 sec
the_waiter.wait(5000)
if the_waiter.timed_out:
pytest.fail(
"timed out whilst setting telescope to standby:\n {}".format(
the_waiter.logs))
def telescope_is_in_standby():
the_waiter = waiter()
the_waiter.wait(5000)
LOGGER.info(
'resource("ska_mid/tm_central/central_node").get("telescopeState")' +
str(resource("ska_mid/tm_central/central_node").get("telescopeState")))
LOGGER.info('resource("mid_csp/elt/subarray_01").get("State")' +
str(resource("mid_csp/elt/subarray_01").get("State")))
LOGGER.info('resource("mid_sdp/elt/subarray_1").get("State")' +
str(resource("mid_sdp/elt/subarray_1").get("State")))
LOGGER.info('resource("mid_csp/elt/master").get("State")' +
str(resource("mid_csp/elt/master").get("State")))
LOGGER.info('resource("mid_sdp/elt/master").get("State")' +
str(resource("mid_sdp/elt/master").get("State")))
LOGGER.info('resource("mid_d0001/elt/master").get("State")' +
str(resource("mid_d0001/elt/master").get("State")))
LOGGER.info('resource("mid_d0002/elt/master").get("State")' +
str(resource("mid_d0002/elt/master").get("State")))
LOGGER.info('resource("mid_d0003/elt/master").get("State")' +
str(resource("mid_d0003/elt/master").get("State")))
LOGGER.info('resource("mid_d0004/elt/master").get("State")' +
str(resource("mid_d0004/elt/master").get("State")))
return [
resource("ska_mid/tm_central/central_node").get("telescopeState"),
resource("mid_csp/elt/subarray_01").get("State"),
resource("mid_sdp/elt/subarray_1").get("State"),
resource("mid_csp/elt/master").get("State"),
resource("mid_d0001/elt/master").get("State"),
resource("mid_d0002/elt/master").get("State"),
resource("mid_d0003/elt/master").get("State"),
resource("mid_d0004/elt/master").get("State"),
] == [
"STANDBY",
"OFF",
"OFF",
"STANDBY",
"STANDBY",
"STANDBY",
"STANDBY",
"STANDBY",
]
def tmc_is_on():
the_waiter = waiter()
the_waiter.set_wait_for_tmc_starting_up()
the_waiter.wait(5000)
LOGGER.info('resource("ska_mid/tm_central/central_node").get("State")' +
str(resource("ska_mid/tm_central/central_node").get("State")))
LOGGER.info('resource("ska_mid/tm_subarray_node/1").get("State")' +
str(resource("ska_mid/tm_subarray_node/1").get("State")))
LOGGER.info('resource("ska_mid/tm_leaf_node/sdp_master").get("State")' +
str(resource("ska_mid/tm_leaf_node/sdp_master").get("State")))
LOGGER.info(
'resource("ska_mid/tm_leaf_node/sdp_subarray01").get("State")' +
str(resource("ska_mid/tm_leaf_node/sdp_subarray01").get("State")))
LOGGER.info('resource("ska_mid/tm_leaf_node/csp_master").get("State")' +
str(resource("ska_mid/tm_leaf_node/csp_master").get("State")))
LOGGER.info(
'resource("ska_mid/tm_leaf_node/csp_subarray01").get("State")' +
str(resource("ska_mid/tm_leaf_node/csp_subarray01").get("State")))
LOGGER.info('resource("ska_mid/tm_leaf_node/d0001").get("State")' +
str(resource("ska_mid/tm_leaf_node/d0001").get("State")))
LOGGER.info('resource("ska_mid/tm_leaf_node/d0002").get("State")' +
str(resource("ska_mid/tm_leaf_node/d0002").get("State")))
LOGGER.info('resource("ska_mid/tm_leaf_node/d0003").get("State")' +
str(resource("ska_mid/tm_leaf_node/d0003").get("State")))
LOGGER.info('resource("ska_mid/tm_leaf_node/d0004").get("State")' +
str(resource("ska_mid/tm_leaf_node/d0004").get("State")))
return [
resource("ska_mid/tm_central/central_node").get("State"),
resource("ska_mid/tm_subarray_node/1").get("State"),
resource("ska_mid/tm_leaf_node/sdp_master").get("State"),
resource("ska_mid/tm_leaf_node/sdp_subarray01").get("State"),
resource("ska_mid/tm_leaf_node/csp_master").get("State"),
resource("ska_mid/tm_leaf_node/csp_subarray01").get("State"),
resource("ska_mid/tm_leaf_node/d0001").get("State"),
resource("ska_mid/tm_leaf_node/d0002").get("State"),
resource("ska_mid/tm_leaf_node/d0003").get("State"),
resource("ska_mid/tm_leaf_node/d0004").get("State"),
] == ["ON", "ON", "ON", "ON", "ON", "ON", "ON", "ON", "ON", "ON"]
def test_start_up_telescope(run_context):
LOGGER.info(
"Before starting the telescope checking if the TMC is in ON state")
assert (tmc_is_on())
LOGGER.info(
"Before starting the telescope checking if the telescope is in StandBy."
)
assert (telescope_is_in_standby)
jsonLogin = {"username": "******", "password": "******"}
url = 'http://taranta-taranta-{}:8080/login'.format(
run_context.HELM_RELEASE)
r = requests.post(url=url, json=jsonLogin)
taranta_jwt = r.cookies.get_dict()['taranta_jwt']
cookies = {'taranta_jwt': taranta_jwt}
url = 'http://taranta-taranta-{}:5004/db'.format(run_context.HELM_RELEASE)
# with open('test-harness/files/mutation.json', 'r') as file:
# mutation = file.read().replace('\n', '')
mutation = '{"query":"mutation {\\n executeCommand(device: \\"ska_mid/tm_central/central_node\\", command: \\"TelescopeOn\\") {\\n ok\\n output\\n message\\n }\\n}\\n","variables":"null"}'
LOGGER.info("Mutation " + str(mutation))
jsonMutation = json.loads(mutation)
LOGGER.info("jsonMutation " + str(jsonMutation))
the_waiter = waiter()
the_waiter.set_wait_for_starting_up()
r = requests.post(url=url, json=jsonMutation, cookies=cookies)
the_waiter.wait()
LOGGER.info("r.text " + str(r.text))
parsed = json.loads(r.text)
LOGGER.info("parsed r.text is " + str(parsed))
print(json.dumps(parsed, indent=4, sort_keys=True))
LOGGER.info("sorted pasrsed r.text " +
str(json.dumps(parsed, indent=4, sort_keys=True)))
try:
assert parsed['data']['executeCommand']['ok'] == True
finally:
# tear down command is ignored if it is already in standby
if not telescope_is_in_standby():
# wait first for telescope to completely go to standby before switchig it off again
set_telescope_to_standby()
LOGGER.info("Telescope is in STANDBY")
def allocate_four_dishes(result):
the_waiter = waiter()
the_waiter.set_wait_for_assign_resources()
result['response'] = SubArray(1).allocate(
ResourceAllocation(dishes=[Dish(1), Dish(2),
Dish(3), Dish(4)]))
#wait for certain values to be changed (refer to helpers for what is currently defined as neccesarry to wait)
the_waiter.wait()
LOGGER.info(the_waiter.logs)
result = wait_for(resource('mid_csp/elt/master'), 20).to_be({
"attr":
"receptorMembership",
"value": (1, 1, 1, 1)
})
if (result == "timed out"):
LOGGER.info(
"timed out after 2 seconds waiting for mid_csp/elt/master receptorMembership to change to (1,1,1,1)"
)
return result
def teardown_function(function):
""" teardown any state that was previously setup with a setup_function
call.
"""
the_waiter = waiter()
if (resource('ska_mid/tm_subarray_node/1').get('obsState') == "IDLE"):
#this means there must have been an error
the_waiter.set_wait_for_tearing_down_subarray()
LOGGER.info("tearing down composed subarray (IDLE)")
SubArray(1).deallocate()
the_waiter.wait()
LOGGER.info(the_waiter.logs)
if (resource('ska_mid/tm_subarray_node/1').get('obsState') == "READY"):
#this means test must have passed
LOGGER.info("tearing down configured subarray (READY)")
the_waiter.set_wait_for_ending_SB()
SubArray(1).end_sb()
the_waiter.wait()
LOGGER.debug(the_waiter.logs)
the_waiter.set_wait_for_tearing_down_subarray()
SubArray(1).deallocate()
the_waiter.wait()
LOGGER.debug(the_waiter.logs)
if (resource('ska_mid/tm_subarray_node/1').get('obsState') == "CONFIGURING"
):
LOGGER.warn(
"Subarray is still in configuring! Please restart MVP manualy to complete tear down"
)
restart_subarray(1)
#raise exception since we are unable to continue with tear down
raise Exception("Unable to tear down test setup")
LOGGER.info("Putting Telescope in standby")
the_waiter.set_wait_for_going_to_standby()
SKAMid().standby()
the_waiter.wait()
LOGGER.debug(the_waiter.logs)
def sync_going_to_standby(timeout=50):
check_going_into_standby()
the_waiter = waiter()
the_waiter.set_wait_for_going_to_standby()
yield
the_waiter.wait(timeout)
def sync_resources_releasing(timeout=100):
the_waiter = waiter()
the_waiter.set_wait_for_tearing_down_subarray()
yield
the_waiter.wait(timeout)
def test_obsreset():
try:
# given an interface to TMC to interact with a subarray node and a central node
fixture = {}
fixture["state"] = "Unknown"
the_waiter = waiter()
# given a started up telescope
assert telescope_is_in_standby()
LOGGER.info("Staring up the Telescope")
tmc.start_up()
fixture["state"] = "Telescope On"
# and a subarray composed of two resources configured as perTMC_integration/assign_resources.json
LOGGER.info("Composing the Subarray")
sdp_block = tmc.compose_sub()
fixture["state"] = "Subarray Assigned"
@log_it("TMC_int_configure", devices_to_log,
non_default_states_to_check)
def configure_sub(sdp_block):
# commented because below asserts are already checked in @sync_configure
# resource('ska_mid/tm_subarray_node/1').assert_attribute('State').equals('ON')
# resource('ska_mid/tm_subarray_node/1').assert_attribute('obsState').equals('IDLE')
configure1_file = "resources/test_data/TMC_integration/configure2.json"
update_scan_config_file(configure1_file, sdp_block)
config = load_config_from_file(configure1_file)
LOGGER.info("Configuring a scan for subarray 1")
fixture["state"] = "Subarray CONFIGURING"
SubarrayNode = DeviceProxy("ska_mid/tm_subarray_node/1")
SubarrayNode.Configure(config)
LOGGER.info("Invoked Configure on Subarray")
configure_sub(sdp_block)
fixture["state"] = "Subarray Configured for SCAN"
resource("ska_mid/tm_subarray_node/1").assert_attribute(
"obsState").equals("CONFIGURING")
LOGGER.info("Aborting the subarray")
fixture["state"] = "Subarray ABORTING"
@log_it("TMC_int_abort", devices_to_log, non_default_states_to_check)
@sync_abort()
def abort():
resource("ska_mid/tm_subarray_node/1").assert_attribute(
"State").equals("ON")
resource("ska_mid/tm_subarray_node/1").assert_attribute(
"obsState").equals("CONFIGURING")
SubarrayNode = DeviceProxy("ska_mid/tm_subarray_node/1")
SubarrayNode.Abort()
LOGGER.info("Invoked Abort on Subarray")
abort()
the_waiter.wait()
LOGGER.info("Abort is complete on Subarray")
fixture["state"] = "Subarray Aborted"
fixture["state"] = "Subarray Resetting"
@sync_obsreset()
def obsreset():
resource("ska_mid/tm_subarray_node/1").assert_attribute(
"State").equals("ON")
# resource('mid_csp/elt/subarray_01').assert_attribute('obsState').equals('ABORTED')
# resource('mid_sdp/elt/subarray_1').assert_attribute('obsState').equals('ABORTED')
SubarrayNode = DeviceProxy("ska_mid/tm_subarray_node/1")
# the_waiter.wait()
LOGGER.info(
"Subarray obsState before Aborted assertion check is: " +
str(SubarrayNode.obsState))
resource("ska_mid/tm_subarray_node/1").assert_attribute(
"obsState").equals("ABORTED")
SubarrayNode.ObsReset()
LOGGER.info("Subarray obsState is: " + str(SubarrayNode.obsState))
LOGGER.info("Invoked obsreset on Subarray")
obsreset()
LOGGER.info("Obsreset is complete on Subarray")
fixture["state"] = "Subarray IDLE"
tmc.release_resources()
LOGGER.info("Invoked ReleaseResources on Subarray")
tmc.set_to_standby()
LOGGER.info("Invoked StandBy on Subarray")
# tear down
LOGGER.info("TMC-ObsReset tests complete: tearing down...")
except:
LOGGER.info("Tearing down failed test, state = {}".format(
fixture["state"]))
if fixture["state"] == "Telescope On":
tmc.set_to_standby()
elif fixture["state"] == "Subarray Assigned":
tmc.release_resources()
tmc.set_to_standby()
elif fixture["state"] == "Subarray ABORTING":
raise Exception(
"unable to teardown subarray from being in ABORTING")
elif fixture["state"] == "Subarray Aborted":
raise Exception(
"unable to teardown subarray from being in Aborted")
elif fixture["state"] == "Subarray Resetting":
raise Exception(
"unable to teardown subarray from being in Restarting")
elif fixture["state"] == "Subarray IDLE":
tmc.release_resources()
tmc.set_to_standby()
pytest.fail("unable to complete test without exceptions")
def sync_sb_ending():
check_going_out_of_configured()
the_waiter = waiter()
the_waiter.set_wait_for_ending_SB()
yield
the_waiter.wait()
def sync_telescope_starting_up(timeout=50):
check_coming_out_of_standby()
the_waiter = waiter()
the_waiter.set_wait_for_starting_up()
yield
the_waiter.wait(timeout)
def sync_assigned_resources(nr_of_receptors=4):
check_going_out_of_empty()
the_waiter = waiter()
the_waiter.set_wait_for_assign_resources(nr_of_receptors=nr_of_receptors)
yield
the_waiter.wait(timeout=60)
def test_multi_scan():
####
try:
the_waiter = waiter()
fixture = {}
fixture["state"] = "Unknown"
# given a started up telescope
LOGGER.info("Checking if Telescope is in StandBy")
assert telescope_is_in_standby()
LOGGER.info("Telescope is in StandBy")
tmc.start_up()
LOGGER.info("Staring up the Telescope")
fixture["state"] = "Telescope On"
# and a subarray composed of two resources configured as perTMC_integration/assign_resources1.json
sdp_block = tmc.compose_sub()
LOGGER.info("Composing the Subarray")
fixture["state"] = "Subarray Assigned"
# and for which the subarray is configured to perform a scan as per 'TMC_integration/configure1.json'
fixture["state"] = "Subarray CONFIGURING"
configure_file = "resources/test_data/TMC_integration/configure2.json"
tmc.configure_sub(sdp_block, configure_file)
LOGGER.info("Configuring the Subarray")
fixture["state"] = "Subarray Configured for SCAN"
# and for which the subarray has successfully completed a scan durating 6 seconds based on previos configuration
resource("ska_mid/tm_subarray_node/1").assert_attribute("obsState").equals(
"READY"
)
LOGGER.info("Starting a scan of 6 seconds")
with log_states("TMC_ss-41-scan1", devices_to_log, non_default_states_to_check):
with sync_scanning(200):
SubarrayNode = DeviceProxy("ska_mid/tm_subarray_node/1")
SubarrayNode.Scan('{"id":1}')
fixture["state"] = "Subarray SCANNING"
LOGGER.info("Subarray obsState is: " + str(SubarrayNode.obsState))
LOGGER.info("Scan 1 is executing on Subarray")
LOGGER.info("Scan1 complete")
fixture["state"] = "Subarray Configured for SCAN"
# then when I load a new configuration to perform a can as per TMC_integration/configure2.json
LOGGER.info("Configuring the Subarray")
fixture["state"] = "Subarray CONFIGURING"
configure_file = "resources/test_data/TMC_integration/configure1.json"
tmc.configure_sub(sdp_block, configure_file)
LOGGER.info("Configuring the Subarray")
fixture["state"] = "Subarray Configured for SCAN"
# and run a new scan bsed on that configuration
resource("mid_csp/elt/subarray_01").assert_attribute("obsState").equals("READY")
resource("mid_csp_cbf/sub_elt/subarray_01").assert_attribute("obsState").equals(
"READY"
)
resource("mid_sdp/elt/subarray_1").assert_attribute("obsState").equals("READY")
resource("ska_mid/tm_subarray_node/1").assert_attribute("obsState").equals(
"READY"
)
LOGGER.info("Starting a scan of 6 seconds")
with log_states("TMC_ss-41-scan2", devices_to_log, non_default_states_to_check):
with sync_scanning(200):
LOGGER.info("Check obsstate again before starting 2nd scan")
resource("ska_mid/tm_subarray_node/1").assert_attribute(
"obsState"
).equals("READY")
resource("mid_csp/elt/subarray_01").assert_attribute("obsState").equals(
"READY"
)
resource("mid_csp_cbf/sub_elt/subarray_01").assert_attribute(
"obsState"
).equals("READY")
resource("mid_sdp/elt/subarray_1").assert_attribute("obsState").equals(
"READY"
)
SubarrayNode = DeviceProxy("ska_mid/tm_subarray_node/1")
SubarrayNode.Scan('{"id":1}')
fixture["state"] = "Subarray SCANNING"
LOGGER.info("Subarray obsState is: " + str(SubarrayNode.obsState))
LOGGER.info("Scan2 complete")
fixture["state"] = "Subarray Configured for SCAN"
# the scanning should complete without any exceptions
# TODO possibly add some other asserts in here
# tear down
LOGGER.info("TMC-multiscan tests complete: tearing down...")
tmc.end_sb()
the_waiter.wait()
LOGGER.info("Invoked EndSB on Subarray")
tmc.release_resources()
the_waiter.wait()
LOGGER.info("Invoked ReleaseResources on Subarray")
tmc.set_to_standby()
LOGGER.info("Invoked StandBy on Subarray")
the_waiter.wait()
LOGGER.info("Invoked StandBy on Subarray")
LOGGER.info("Tests complete: tearing down...")
except Exception as e:
logging.info(f"Exception raised: {e.args}")
LOGGER.info("Gathering logs")
LOGGER.info("Tearing down failed test, state = {}".format(fixture["state"]))
if fixture["state"] == "Telescope On":
tmc.set_to_standby()
the_waiter.wait()
elif fixture["state"] == "Subarray Assigned":
tmc.release_resources()
the_waiter.wait()
tmc.set_to_standby()
the_waiter.wait()
elif fixture["state"] == "Subarray Configured for SCAN":
tmc.end_sb()
the_waiter.wait()
tmc.release_resources()
the_waiter.wait()
tmc.set_to_standby()
the_waiter.wait()
elif fixture["state"] == "Subarray SCANNING":
if resource("ska_mid/tm_subarray_node/1").get("obsState") == "SCANNING":
raise Exception("unable to teardown subarray from being in SCANNING")
else:
# sleep arbitrary number here to handle possible failures in un-idempotentcy
sleep(3)
tmc.end_sb()
the_waiter.wait()
tmc.release_resources()
the_waiter.wait()
tmc.set_to_standby()
the_waiter.wait()
raise e
elif fixture["state"] == "Subarray CONFIGURING":
raise Exception("unable to teardown subarray from being in CONFIGURING")
elif fixture["state"] == "Unknown":
LOGGER.info("Put telescope back to standby")
tmc.set_to_standby()
the_waiter.wait()
pytest.fail("unable to complete test without exceptions")
def sync_oet_scanning(timeout=200):
check_going_out_of_configured()
the_waiter = waiter()
the_waiter.set_wait_for_going_into_scanning()
yield
the_waiter.wait()
def start_up():
the_waiter = waiter()
the_waiter.set_wait_for_starting_up()
SKAMid().start_up()
the_waiter.wait()
LOGGER.info(the_waiter.logs)