def main():
print('WARNING: THIS OPTION SHOULD BE USED TO PROVISION A *SECNET* ILO SEGMENT')
print('(NOT COMMON - ONLY SOME ACCENTURE ACCOUNTS HAVE THIS)\n')
##### Prompts to enter username, password, and allocation code:
[username,password,alloccode] = getUPA()
##### Prompts to enter SIDs/speed/locations
[mfw,speed,mfwloc,ips,ipsloc] = getDevices('firewall')
print('OK\nNow let\'s define a SECNET iLO segment.\n')
###### STANDARD BACK SEGMENT
# 1. VLAN:
while True:
try:
iloVlan = getVLAN('SecNet iLO',[])
if 900 <= iloVlan <= 949:
break
else:
print('ERROR: ILO VLAN MUST BE BETWEEN 900 AND 949.\n')
except AtrributeError:
print('ERROR: AttributeError.\n')
# 2. DEPTHCODE:
iloDepth = getDepth('firewall','9901',[])
# 3. ILO SUBNET:
if mfwloc.site == 'iad':
ilonet = ip_network('10.176.0.0/16')
else:
ilonet = ip_network('10.177.0.0/16')
# 4. FIREWALL INTERFACE:
while True:
try:
fw_interface = input('Enter the firewall interface for the iLO segment (e.g, eth1, s1p1, gi0/4, etc.): ').strip()
if fw_interface in devicePorts(mfw):
break
else:
print('ERROR: INVALID INTERFACE\n')
except AttributeError:
print('ERROR: INVALID INTERFACE\n')
# 5. SWITCHPORT NUMBER:
while True:
try:
swpt_number = int(input('Pick the first available port on mod 4 of '+mfwloc.findsecsw()+': '))
if 1 <= swpt_number <= 48:
break
else:
print('ERROR: NUMBER OUT OF RANGE\n')
except (AttributeError,ValueError):
print('ERROR: INVALID DATA\n')
# 6. VRRP IP:
while True:
try:
vrrp_ip = ip_address(input('Enter the IP address of the iLO gateway/VRRP interface (e.g., 10.176.128.9): '))
if vrrp_ip in ilonet:
break
else:
print('ERROR: '+str(vrrp_ip)+' does not belong to '+str(ilonet)+'.\n')
except ValueError:
print('ERROR: INVALID ADDRESS/NETMASK\n')
#############################################################################
print('\nThe rest will generate port configs, custom cabling info, allocation form, etc.\n')
# back up port configs
print('***************************************')
print('Collecting switchport backup configs...')
print('***************************************\n')
try:
child = pexpect.spawnu('telnet '+mfwloc.findsecsw()+'.dn.net')
child.expect('Username: '******'Password: '******'6513-'+mfwloc.findsecsw()+'-sec-c\d{1,2}#',timeout=3)
print(mfwloc.findsecsw()+':\n')
child.sendline('sh run int gi4/'+str(swpt_number))
child.expect('6513-'+mfwloc.findsecsw()+'-sec-c\d{1,2}#')
print(child.before)
child.sendline('exit')
except (EOF,TIMEOUT,ExceptionPexpect):
print('ERROR: Unable to collect switchport configs from '+mfwloc.findsecsw())
print('Try collecting configs manually instead:')
print()
print(' '+mfwloc.findsecsw()+':')
print(' sh run int gi4/'+str(swpt_number))
print()
input('Hit Enter to view the new switchport configs.')
print()
# new port configs
print('*************************************************')
print('Use the following to apply new switchport configs')
print('*************************************************\n')
swconf = 'telnet '+mfwloc.findsecsw()+'\n'
swconf += username+'\n'
swconf += password+'\n'
swconf += 'conf t\n'
swconf += 'int gi4/'+str(swpt_number)+'\n'
swconf += ' description '+alloccode+'-'+iloDepth+' '+mfw+' back\n'
swconf += ' switchport\n'
swconf += ' switchport access vlan '+str(iloVlan)+'\n'
swconf += ' switchport private-vlan host-association 11 '+str(iloVlan)+'\n'
swconf += ' switchport mode private-vlan host\n'
swconf += ' speed '+speed+'\n'
swconf += ' duplex full\n'
swconf += ' spanning-tree portfast edge\n'
swconf += ' no shut\n'
swconf += ' end\n'
print(swconf)
input('Hit Enter to view the custom cabling information')
print()
# cabling instructions
print('CUSTOM CABLING INFORMATION:')
print('---------------------------\n')
print()
print('iLO:')
print(' '+mfw+' '+fw_interface+' -> GREEN STRAIGHT -> '+mfwloc.findsecsw()+' gi4/'+str(swpt_number)+' (Direct run no patch)')
print()
input('Hit Enter to view the firewall allocation form')
print()
# Firewall allocation form
print('**Add the following to the firewall allocation section:\n\n')
HAdeviceForm = 'FIREWALL NETWORK INFORMATION:\n'
HAdeviceForm += '------------------------------\n\n'
HAdeviceForm += '**iLO (Network '+iloDepth+'):\n\n'
HAdeviceForm += ' Physical Interface: '+fw_interface+'\n\n'
HAdeviceForm += ' Back Interface: '+str(vrrp_ip)+' (gateway for servers)\n'
HAdeviceForm += ' Back Network: '+str(ilonet)+'\n'
HAdeviceForm += ' Back Netmask: '+str(ilonet.netmask)+'\n\n'
HAdeviceForm += ' Connection To: '+mfwloc.findsecsw()+'\n'
HAdeviceForm += ' Connection Port: gi4/'+str(swpt_number)+'\n\n'
HAdeviceForm += ' SwitchPort Speed/Duplex set to: '+speed+'M/Full\n'
HAdeviceForm += ' (Firewalls should be set to the same speed)\n'
HAdeviceForm += ' SecNet Community VLAN (Num/Label): '+str(iloVlan)+'/ilonet_'+alloccode+'\n\n'
print(HAdeviceForm)
def main():
##### Prompts to enter username, password, and allocation code:
[username,password,alloccode] = getUPA()
##### Prompts to enter SIDs/speed/locations of HA pair & IPS:
[mfw,speed,mfwloc,ips,ipsloc] = getDevices('loadbalancer')
###### Summary Output of Devices:
showSummarySA(mfw,mfwloc,ips,ipsloc)
###### Prompts to select a sync port:
availPorts = devicePorts(mfw)
###### FRONT SEGMENT
# 1. VLAN:
Vlans = [] # FW vlans. ipsmgtVlan will not be included.
frontVlan = getVLAN('the loadbalancer front',Vlans)
Vlans.append(frontVlan)
# 2. DEPTHCODE:
Depths = []
frontdepth = getDepth('loadbalancer','0101',Depths)
Depths.append(frontdepth)
# 3. SUBNETS:
frontnet = getSubnets('the loadbalancer front',mfw)
if len(frontnet)>1:
print('WARNING: The loadbalancer front accepts a single subnet. Only the first subnet was accepted.\n')
print('OK\nNow let\'s define loadbalancer back segments, one by one.\n')
###### STANDARD BACK SEGMENT
# 1. NAME:
Segments = ['front'] # FW segment names
SegmentsL = ['front'] # FW segment names with all chars lowered, for uniqueness checks.
backName = getUniqueSegmentName(SegmentsL)
Segments.append(backName)
SegmentsL.append(backName.lower())
# 2. VLAN:
backVlan = getVLAN(backName,Vlans)
Vlans.append(backVlan)
# 3. DEPTHCODE:
backdepth = getDepth('loadbalancer','0201',Depths)
Depths.append(backdepth)
# 4. SUBNETS:
backnets = getSubnets(backName,mfw)
# 5. IPS QUESTION:
monitored = 0
Sniff = ['n']
[monitored,Sniff] = askifMonitor(ips,monitored,Sniff)
Ports = [1,16] # FW segment ports. First two for front & back (1,16) are fake.
SubnetLists = [frontnet,backnets]
###### 'ADD?' ######
add_more_segment = addQuestion()
#################### LOOP - BACK SEGMENTS ADDITIONS ########################
while add_more_segment == 'y':
###### CHOOSE AUX PORT ######
auxport = pickPort(mfwloc,Ports)
Ports.append(auxport)
###### CREATE SEGMENT NAME ######
auxsegment = getUniqueSegmentName(SegmentsL)
Segments.append(auxsegment)
SegmentsL.append(auxsegment.lower())
###### CHOOSE VLAN ######
auxvlan = getVLAN(auxsegment,Vlans)
Vlans.append(auxvlan)
###### CHOOSE DEPTH CODE ######
auxdepth = getDepth('loadbalancer','0202',Depths)
Depths.append(auxdepth)
###### CHOOSE SUBNETS ######
SubnetLists.append(getSubnets(auxsegment,mfw))
###### IPS OPTION ######
[monitored,Sniff] = askifMonitor(ips,monitored,Sniff)
###### 'ADD?' ######
add_more_segment = addQuestion()
############################## END OF LOOP #################################
###### IPS MANAGEMENT
if ips != 'none':
# 1. VLAN:
print('\nNow choose the IPS management VLAN.\n'
+'It can be any one of the VLANs that you allocated to this customer.\n'
+'However, try avoiding a VLAN that is widely exposed to the Internet.')
ipsmgtVlan = getIpsVLAN('loadbalancer',frontVlan)
# 2. DEPTH CODE:
ipsmgtDepth = getIPSDepth(Vlans,ipsmgtVlan,Depths)
# 3. IP ADDRESS:
ipsmgtIPaddr = getInterfaceIP('the IPS management')
#############################################################################
print('\nThe rest will generate port configs, custom cabling info, allocation form, etc.\n')
# SVIs backup and configs
if frontdepth == '0001':
makeSVI(username,password,mfwloc,frontVlan,alloccode,frontnet)
input('Hit Enter to collect switchport backup configs.')
print()
# back up port configs
backupPorts(mfwloc,ipsloc,username,password,Ports,ips)
input('Hit Enter to view the new switchport configs.')
print()
# new port configs
print('*************************************************')
print('Use the following to apply new switchport configs')
print('*************************************************\n')
swconf = 'telnet '+mfwloc.findsw()+'\n'
swconf += username+'\n'
swconf += password+'\n'
swconf += 'conf t\n'
swconf += 'int '+mfwloc.findfrport()+'\n'
swconf += ' description '+mfwloc.rrs.replace('.','-')+'-fr '+alloccode+'-'+Depths[0]+' '+mfw+' front\n'
swconf += ' switchport\n'
swconf += ' switchport access vlan '+str(Vlans[0])+'\n'
swconf += ' switchport mode access\n'
swconf += ' speed auto\n'
swconf += ' no duplex\n'
swconf += ' flowcontrol receive on\n'
swconf += ' spanning-tree portfast edge\n'
swconf += ' no shut\n'
swconf += '!\n'
swconf += 'int '+mfwloc.findbkport()+'\n'
swconf += ' description '+mfwloc.rrs.replace('.','-')+'-bk '+alloccode+'-'+Depths[1]+' '+mfw+' back\n'
swconf += ' switchport\n'
swconf += ' switchport access vlan '+str(Vlans[1])+'\n'
swconf += ' switchport mode access\n'
swconf += ' speed auto\n'
swconf += ' no duplex\n'
swconf += ' flowcontrol receive on\n'
swconf += ' spanning-tree portfast edge\n'
swconf += ' no shut\n'
swconf += '!\n'
aux = 2
for port in Ports[2:]:
swconf += 'int gi'+mfwloc.findmod()+'/'+str(port)+'\n'
swconf += ' description '+mfwloc.rrs.replace('.','-')+'-b'+str(aux)+' '+alloccode+'-'+Depths[aux]+' '+mfw+' back'+str(aux)+'\n'
swconf += ' switchport\n'
swconf += ' switchport access vlan '+str(Vlans[aux])+'\n'
swconf += ' switchport mode access\n'
swconf += ' speed auto\n'
swconf += ' no duplex\n'
swconf += ' flowcontrol receive on\n'
swconf += ' spanning-tree portfast edge\n'
swconf += ' no shut\n'
swconf += '!\n'
aux += 1
if ips != 'none':
if mfwloc.findmod() != ipsloc.findmod():
swconf += 'exit\n\n'
swconf += 'telnet '+ipsloc.findsw()+'\n'
swconf += username+'\n'
swconf += password+'\n'
swconf += 'conf t\n'
swconf += 'int '+ipsloc.findfrport()+'\n'
swconf += ' description RESERVED: '+ipsloc.rrs.replace('.','-')+'-fr '+alloccode+' '+ips+'\n'
swconf += ' switchport\n'
swconf += ' switchport access vlan 133\n'
swconf += ' switchport mode access\n'
swconf += ' spanning-tree portfast edge\n'
swconf += ' shut\n'
swconf += '!\n'
swconf += 'int '+ipsloc.findbkport()+'\n'
swconf += ' description '+ipsloc.rrs.replace('.','-')+'-bk '+alloccode+'-'+ipsmgtDepth+' '+ips+' mgmt\n'
swconf += ' switchport\n'
swconf += ' switchport access vlan '+str(ipsmgtVlan)+'\n'
swconf += ' switchport mode access\n'
swconf += ' speed 100\n'
swconf += ' duplex full\n'
swconf += ' spanning-tree portfast edge\n'
swconf += ' no shut\n!\n'
swconf += ' end\n'
else:
swconf += ' end\n'
print(swconf)
input('Hit Enter to view the custom cabling information')
print()
# cabling instructions
site = mfwloc.site
rs = mfwloc.rs
if site == 'iad':
nw_rs = ('3.1','3.2','3.3','3.4','3.5','3.6','3.7','3.8',
'3.9','3a.9','3.10','3a.10','3.11','3a.11','3.12','3a.12',
'3.13','3a.13','3.14','3a.14','3.15','3a.15','3.16','3a.16',
'3.17','3a.17','3.18','3a.18','3.19','3a.19','3.20','3a.20',
'12.1','12.2','12.3','12.4','12.5','12.6','12.7','12.8',
'12.9','12a.9','12.10','12a.10','12.11','12a.11','12.12','12a.12',
'12.13','12a.13','12.14','12a.14','12.15','12a.15','12.16','12a.16',
'12.17','12a.17','12.18','12a.18','12.19','12a.19','12.20','12a.20')
else:
nw_rs = ('3.1', '3a.1', '3.2', '3a.2', '3.3', '3a.3', '3.4', '3a.4',
'3.5', '3a.5', '3.6', '3a.6', '3.7', '3a.7', '3.8', '3a.8',
'3.9', '3a.9', '3.10', '3a.10', '3.11', '3a.11', '3.12', '3a.12',
'3.13', '3a.13', '3.14', '3a.14', '3.15', '3a.15', '3.16', '3a.16',
'22.1', '22a.1', '22.2', '22a.2', '22.3', '22a.3', '22.4', '22a.4',
'22.5', '22a.5', '22.6', '22a.6', '22.7', '22a.7', '22.8', '22a.8',
'22.9', '22a.9', '22.10', '22a.10', '22.11', '22a.11', '22.12', '22a.12',
'22.13', '22a.13', '22.14', '22a.14', '22.15', '22a.15', '22.16', '22a.16')
if mfwloc.is_masterloc():
updown = 'UPPER'
if site == 'iad':
bk = '50'
else:
bk = '43'
else:
updown = 'LOWER'
if site == 'iad':
bk = '49'
else:
bk = '42'
print('CUSTOM CABLING INFORMATION:')
print('---------------------------\n')
cabling = ''
cumulative = 0
if Sniff[1] == 'y':
cumulative += 1
cabling += backName+':\n'
cabling += ' '+mfw+' '+availPorts[1]+' -> GREEN XOVER -> '+ips+' port 1A\n'
cabling += ' '+ips+' port 1B -> GREEN STRAIGHT -> U'+bk+' '+updown+' ORANGE PANEL p'+str(nw_rs.index(rs)%16+17)+'\n\n'
auxII = 2
for segment in Segments[2:]:
cabling += segment+':\n'
if Sniff[auxII] == 'y':
cumulative += 1
cabling += ' '+mfw+' '+availPorts[auxII]+' -> GREEN XOVER -> '+ips+' port '+str('1A' if cumulative == 1 else '2C')+'\n'
cabling += ' '+ips+' port '+str('1B' if cumulative == 1 else '2D')+' -> GREEN STRAIGHT -> U'+bk+' '+updown+' ORANGE PANEL p'+str(Ports[auxII])+'\n\n'
else:
cabling += ' '+mfw+' '+availPorts[auxII]+' -> GREEN STRAIGHT -> U'+bk+' '+updown+' ORANGE PANEL p'+str(Ports[auxII])+'\n\n'
auxII += 1
print(cabling)
input('Hit Enter to view the loadbalancer allocation form')
print()
# LB allocation form
if mfw.is_fw():
devicetype = 'firewall'
else:
devicetype = 'loadbalancer'
deviceForm = 'LOAD-BALANCING INFORMATION:\n'
deviceForm += '------------------------------\n\n'
deviceForm += 'Allocation Code: '+alloccode+'\n\n'
deviceForm += devicetype.title()+' ID: '+mfw+'\n'
deviceForm += 'Rack/Console Loc.Code: '+mfwloc+'\n'
deviceForm += devicetype.title()+' Network Unit: Infra 4.0, equipment rack: '+mfwloc.row+'-'+mfwloc.rack_noa+'\n\n'
deviceForm += devicetype.title()+' Front (Network '+frontdepth+'):\n\n'
deviceForm += ' Front Interface: '+str(frontnet[0][4])+'\n'
deviceForm += ' Default Gateway: '+str(frontnet[0][1])+'\n'
deviceForm += ' Front Network: '+str(frontnet[0])+'\n'
deviceForm += ' Front Netmask: '+str(frontnet[0].netmask)+'\n\n'
deviceForm += ' Ports on SLB Equipment side: '+availPorts[0]+'\n'
deviceForm += ' SLB-Equipment side VLAN & VRRP ID: 1\n'
deviceForm += ' Connection To: '+mfwloc.findsw()+'\n'
deviceForm += ' Connection Port: '+mfwloc.findfrport()+' (flowctrl recv on)\n'
deviceForm += ' SwitchPort Speed/Duplex set to: a-1000M/a-Full\n'
deviceForm += ' INFRA4.0 VLAN (Num/Label): '+str(frontVlan)+'/'+mfwloc.room+'r'+str("%02d" % int(mfwloc.row))+'-'+alloccode+'-'+frontdepth+'\n\n'
deviceForm += devicetype.title()+' Back Networks:\n\n'
deviceForm += '**'+backName+' (Network '+backdepth+'):\n\n'
deviceForm += ' Back Interface: '+str(backnets[0][1])+' (gateway for ???)\n'
deviceForm += ' Back Network: '+str(backnets[0])+'\n'
deviceForm += ' Back Netmask: '+str(backnets[0].netmask)+'\n\n'
####################### ADD LOOP FOR ADDITIONAL ALIASES #######################
if len(backnets) > 1:
for backnet in backnets[1:]:
deviceForm += ' *Add\'tl Alias for '+backName+':\n\n'
deviceForm += ' Back Interface: '+str(backnet[1])+' (gateway for ???)\n'
deviceForm += ' Back Network: '+str(backnet)+'\n'
deviceForm += ' Back Netmask: '+str(backnet.netmask)+'\n\n'
###############################################################################
deviceForm += ' SLB device back-alias-IP: ?\n'
deviceForm += ' Netmask on SLB device-alias: ?\n\n'
deviceForm += ' Ports on SLB Equipment side: '+availPorts[1]+'\n'
deviceForm += ' SLB-Equipment side VLAN & VRRP ID: 102\n'
deviceForm += ' Connection To: '+mfwloc.findsw()+'\n'
deviceForm += ' Connection Port: '+mfwloc.findbkport()+' (flowctrl recv on)\n'
deviceForm += ' SwitchPort Speed/Duplex set to: a-1000M/a-Full\n'
deviceForm += ' INFRA4.0 VLAN (Num/Label): '+str(backVlan)+'/'+mfwloc.room+'r'+str("%02d" % int(mfwloc.row))+'-'+alloccode+'-'+backdepth+'\n\n'
deviceForm += ' Range of Load-balanced sites:\n\n'
deviceForm += ' 1: \n'
deviceForm += ' 2: \n'
deviceForm += ' 3: \n\n'
deviceForm += ' RESERVED: \n\n'
auxIII = 2
for segment in Segments[2:]:
deviceForm += '**'+segment+' (Network '+Depths[auxIII]+')\n\n'
deviceForm += ' Back Interface: '+str(SubnetLists[auxIII][0][1])+' (gateway for ???)\n'
deviceForm += ' Back Network: '+str(SubnetLists[auxIII][0])+'\n'
deviceForm += ' Back Netmask: '+str(SubnetLists[auxIII][0].netmask)+'\n\n'
####################### ADD LOOP FOR ADDITIONAL ALIASES #######################
if len(SubnetLists[auxIII]) > 1:
for aliasnet in SubnetLists[auxIII][1:]:
deviceForm += ' *Add\'tl Alias for '+Segments[auxIII]+':\n\n'
deviceForm += ' Back Interface: '+str(aliasnet[1])+' (gateway for ???)\n'
deviceForm += ' Back Network: '+str(aliasnet)+'\n'
deviceForm += ' Back Netmask: '+str(aliasnet.netmask)+'\n\n'
###############################################################################
deviceForm += ' SLB device back-alias-IP: ?\n'
deviceForm += ' Netmask on SLB device-alias: ?\n\n'
deviceForm += ' Ports on SLB Equipment side: '+availPorts[auxIII]+'\n'
deviceForm += ' SLB-Equipment side VLAN & VRRP ID: '+str(101+auxIII)+'\n'
deviceForm += ' Connection To: '+mfwloc.findsw()+'\n'
deviceForm += ' Connection Port: gi'+mfwloc.findmod()+'/'+str(Ports[auxIII])+' (flowctrl recv on)\n'
deviceForm += ' SwitchPorts Speed/Duplex set to: a-1000M/a-Full\n'
deviceForm += ' INFRA4.0 VLAN (Num/Label): '+str(Vlans[auxIII])+'/'+mfwloc.room+'r'+str("%02d" % int(mfwloc.row))+'-'+alloccode+'-'+Depths[auxIII]+'\n\n'
deviceForm += ' Range of Load-balanced sites:\n\n'
deviceForm += ' 1: \n'
deviceForm += ' 2: \n'
deviceForm += ' 3: \n\n'
deviceForm += ' RESERVED: \n\n'
auxIII += 1
print(deviceForm)
if ips != 'none':
input('Hit Enter to view the IPS allocation form')
print()
# [IF APPLICABLE] IPS allocation form
ipsform = 'IPS NETWORK INFORMATION:\n'
ipsform += '--------------------------\n\n'
ipsform += 'IPS ID: '+ips+'\n'
ipsform += 'IPS Rack Location: '+ipsloc+'\n\n'
ipsform += 'IPS Management#1 port\n\n'
ipsform += ' connection to: '+ipsloc.findsw()+'\n'
ipsform += ' port: '+ipsloc.findbkport()+' (Green cable)\n'
ipsform += ' speed/dup: 100M/Full\n'
ipsform += ' VLAN (Num/Label): '+str(ipsmgtVlan)+'/'+ipsloc.room+'r'+str("%02d" % int(ipsloc.row))+'-'+alloccode+'-'+ipsmgtDepth+'\n\n'
if Sniff[1] == 'y':
ipsform += 'IPS inline port 1A\n\n'
ipsform += ' connection to: '+mfw+'\n'
ipsform += ' port: '+availPorts[1]+'\n'
ipsform += ' speed/dup: '+speed+'M/Full\n'
ipsform += ' cable type: XOVER\n\n'
ipsform += 'IPS inline port 1B\n\n'
ipsform += ' connection to: '+mfwloc.findsw()+'\n'
ipsform += ' port: '+mfwloc.findbkport()+' ('+mfwloc+' green)\n'
ipsform += ' speed/dup: '+speed+'M/Full\n'
ipsform += ' cable type: straight-thru \n\n'
auxIV = 2
for sniff in Sniff[2:]:
if sniff == 'y':
ipsform += 'IPS inline port 2C\n\n'
ipsform += ' connection to: '+mfw+'\n'
ipsform += ' port: '+availPorts[auxIV]+'\n'
ipsform += ' speed/dup: '+speed+'M/Full\n'
ipsform += ' cable type: XOVER\n\n'
ipsform += 'IPS inline port 2D\n\n'
ipsform += ' connection to: '+mfwloc.findsw()+'\n'
ipsform += ' port: gi'+mfwloc.findmod()+'/'+str(Ports[auxIV])+'\n'
ipsform += ' speed/dup: '+speed+'M/Full\n'
ipsform += ' cable type: straight-thru\n\n'
auxIV += 1
else:
auxIV += 1
else:
auxV = 0
auxVI = 2
for sniff in Sniff[2:]:
if sniff == 'y':
ipsform += 'IPS inline port '+('1A' if auxV == 0 else '2C')+'\n\n'
ipsform += ' connection to: '+mfw+'\n'
ipsform += ' port: '+availPorts[auxVI]+'\n'
ipsform += ' speed/dup: '+speed+'M/Full\n'
ipsform += ' cable type: XOVER\n\n'
ipsform += 'IPS inline port '+('1B' if auxV == 0 else '2D')+'\n\n'
ipsform += ' connection to: '+mfwloc.findsw()+'\n'
ipsform += ' port: gi'+mfwloc.findmod()+'/'+str(Ports[auxVI])+'\n'
ipsform += ' speed/dup: '+speed+'M/Full\n'
ipsform += ' cable type: straight-thru\n\n'
auxV += 1
auxVI += 1
else:
auxVI += 1
ipsform += 'IPS Management\n\n'
ipsform += ' IP: '+str(ipsmgtIPaddr.ip)+'\n'
ipsform += ' Netmask: '+str(ipsmgtIPaddr.netmask)+'\n'
ipsform += ' Gateway: '+str(ipsmgtIPaddr.network[1])+'\n'
ipsform += 'Broadcast: '+str(ipsmgtIPaddr.network[-1])+'\n'
print(ipsform)
