def build():
'''
'''
mesh = nt.Mesh(u'CT_face_geoShape')
placementGrp = nt.Transform(u'CT_placement_grp')
#---------------------------------------------------------------------- bind
if 'bind' in data.build_actions:
bindGrp = face.createBndsFromPlacement(placementGrp)
else:
bindGrp = nt.Transform(u'CT_bnd_grp')
#--------------------------------------------------------- sec motion system
if 'sec_motion_system' in data.build_actions:
face.buildSecondaryControlSystem(placementGrp, bindGrp, mesh)
#------------------------------------------------------------ pri ctl system first
if 'primary_ctl_system_first' in data.build_actions:
# run a simple first pass
# which can be used to block out mappings
bndsForPriCtls = data.all_bnds_for_priCtls
priCtl.setupPriCtlFirstPass(bindGrp, bndsForPriCtls)
priCtl.driveAttachedPriCtlsRun(bindGrp)
#------------------------------------------------------------ pri ctl system second
if 'primary_ctl_system_second' in data.build_actions:
if data.priCtlMappings:
# if priCtlMappings is set up, use the data
priCtlMappings = data.priCtlMappings
priCtl.setupPriCtlSecondPass(priCtlMappings)
priCtl.driveAttachedPriCtlsRun(bindGrp)
else:
pm.warning('no data for pri ctl system')
#-------------------------------------------------------------- load weights
if 'load_weights' in data.build_actions:
priCtlMappings = data.priCtlMappings
priCtl.setPriCtlFirstPassWeights(priCtlMappings)
#--------------------------------------------------------------------- clean
if 'clean' in data.build_actions:
print 'clean'
face.cleanFaceRig()
#---------------------------------------------------------------------- eyes
if 'eyes' in data.build_actions:
buildEyeRig(placementGrp)
#------------------------------------------------------------------ eyeballs
if 'eyeballs' in data.build_actions:
#------------------------------------------ EYEBALL RIG (SIMPLE AIM CONSTRAINTS)
eye.buildEyeballRig()
eye.addEyeAim(prefix='LT_', distance=25) # BROKEN if there is already a
# node named LT_eyeball_grp!!!
eye.addEyeAim(prefix='RT_', distance=25) # BROKEN
#--------------------------------------------------------------- sticky lips
if 'sticky_lips' in data.build_actions:
pass
def build():
'''
'''
mesh = nt.Mesh(u'CT_hat_simplegeoShape')
placementGrp = nt.Transform(u'CT_placement_grp')
#---------------------------------------------------------------------- bind
if 'bind' in data.build_actions:
bindGrp = face.createBndsFromPlacement(placementGrp)
pm.refresh()
else:
bindGrp = nt.Transform(u'CT_bnd_grp')
#--------------------------------------------------------- sec motion system
if 'sec_motion_system' in data.build_actions:
face.buildSecondaryControlSystem(placementGrp, bindGrp, mesh)
pm.refresh()
#------------------------------------------------------------ pri ctl system first
if 'primary_ctl_system_first' in data.build_actions:
# run a simple first pass
# which can be used to block out mappings
bndsForPriCtls = data.all_bnds_for_priCtls
priCtl.setupPriCtlFirstPass(bindGrp, bndsForPriCtls)
priCtl.driveAttachedPriCtlsRun(bindGrp)
#------------------------------------------------------------ pri ctl system second
if 'primary_ctl_system_second' in data.build_actions:
if data.priCtlMappings:
# if priCtlMappings is set up, use the data
priCtlMappings = data.priCtlMappings
priCtl.setupPriCtlSecondPass(priCtlMappings)
priCtl.driveAttachedPriCtlsRun(bindGrp)
pm.refresh()
else:
pm.warning('no data for pri ctl system')
#-------------------------------------------------------------- load weights
if 'load_weights' in data.build_actions:
priCtlWeights = data.priCtlWeights
priCtl.setPriCtlSecondPassWeights(priCtlWeights)
pm.refresh()
#--------------------------------------------------------------------- clean
if 'clean' in data.build_actions:
print 'clean'
face.cleanFaceRig()
pm.select(cl=True)
pm.refresh()
def build():
'''
'''
mesh = nt.Mesh(u'CT_hat_simplegeoShape')
placementGrp = nt.Transform(u'CT_placement_grp')
#---------------------------------------------------------------------- bind
if 'bind' in data.build_actions:
bindGrp = face.createBndsFromPlacement(placementGrp)
pm.refresh()
else:
bindGrp = nt.Transform(u'CT_bnd_grp')
#--------------------------------------------------------- sec motion system
if 'sec_motion_system' in data.build_actions:
face.buildSecondaryControlSystem(placementGrp, bindGrp, mesh)
pm.refresh()
#------------------------------------------------------------ pri ctl system first
if 'primary_ctl_system_first' in data.build_actions:
# run a simple first pass
# which can be used to block out mappings
bndsForPriCtls = data.all_bnds_for_priCtls
priCtl.setupPriCtlFirstPass(bindGrp, bndsForPriCtls)
priCtl.driveAttachedPriCtlsRun(bindGrp)
#------------------------------------------------------------ pri ctl system second
if 'primary_ctl_system_second' in data.build_actions:
if data.priCtlMappings:
# if priCtlMappings is set up, use the data
priCtlMappings = data.priCtlMappings
priCtl.setupPriCtlSecondPass(priCtlMappings)
priCtl.driveAttachedPriCtlsRun(bindGrp)
pm.refresh()
else:
pm.warning('no data for pri ctl system')
#-------------------------------------------------------------- load weights
if 'load_weights' in data.build_actions:
priCtlWeights = data.priCtlWeights
priCtl.setPriCtlSecondPassWeights(priCtlWeights)
pm.refresh()
#--------------------------------------------------------------------- clean
if 'clean' in data.build_actions:
print 'clean'
face.cleanFaceRig()
pm.select(cl=True)
pm.refresh()
def build():
'''
'''
mesh = nt.Mesh(u'CT_face_geoShape')
placementGrp = nt.Transform(u'CT_placement_grp')
#---------------------------------------------------------------------- bind
if 'bind' in data.build_actions:
bindGrp = face.createBndsFromPlacement(placementGrp)
pm.refresh()
else:
bindGrp = nt.Transform(u'CT_bnd_grp')
#--------------------------------------------------------- sec motion system
if 'sec_motion_system' in data.build_actions:
face.buildSecondaryControlSystem(placementGrp, bindGrp, mesh)
pm.refresh()
#------------------------------------------------------------ pri ctl system first
if 'primary_ctl_system_first' in data.build_actions:
# run a simple first pass
# which can be used to block out mappings
bndsForPriCtls = data.all_bnds_for_priCtls
priCtl.setupPriCtlFirstPass(bindGrp, bndsForPriCtls)
priCtl.driveAttachedPriCtlsRun(bindGrp)
#------------------------------------------------------------ pri ctl system second
if 'primary_ctl_system_second' in data.build_actions:
if data.priCtlMappings:
# if priCtlMappings is set up, use the data
priCtlMappings = data.priCtlMappings
priCtl.setupPriCtlSecondPass(priCtlMappings)
priCtl.driveAttachedPriCtlsRun(bindGrp)
pm.refresh()
else:
pm.warning('no data for pri ctl system')
#-------------------------------------------------------------- load weights
if 'load_weights' in data.build_actions:
priCtlWeights = data.priCtlWeights
priCtl.setPriCtlSecondPassWeights(priCtlWeights)
pm.refresh()
#--------------------------------------------------------------------- clean
if 'clean' in data.build_actions:
print 'clean'
face.cleanFaceRig()
pm.select(cl=True)
pm.refresh()
#--------------------------------------------------------------- skin_layers
if 'skin_layers' in data.build_actions:
mll = skin.setupSkinLayers(None,
layers=[
'base', 'jaw', 'cheeks', 'crease',
'lips', 'mouthbag', 'nose', 'brow'
])
_, skn = mll.getTargetInfo()
pm.PyNode(skn).skinningMethod.set(1)
pm.PyNode(skn).deformUserNormals.set(0)
#---------------------------------------------------------------------- eyes
if 'eyes' in data.build_actions:
buildEyeRig(placementGrp)
#------------------------------------------------------------------ eyeballs
if 'eyeballs' in data.build_actions:
#------------------------------------------ EYEBALL RIG (SIMPLE AIM CONSTRAINTS)
eye.buildEyeballRig()
eye.addEyeAim(prefix='LT_',
distance=25) # BROKEN if there is already a
# node named LT_eyeball_grp!!!
eye.addEyeAim(prefix='RT_', distance=25) # BROKEN
#--------------------------------------------------------------- fleshy_eyes
if 'fleshy_eyes' in data.build_actions:
import rigger.modules.poseReader as poseReader
reload(poseReader)
xfo = pm.PyNode('LT_eyeball_bnd')
poseReader.radial_pose_reader(xfo)
xfo = pm.PyNode('RT_eyeball_bnd')
poseReader.radial_pose_reader(xfo)
eye.addFleshyEye()
#--------------------------------------------------------------- sticky lips
if 'sticky_lips' in data.build_actions:
import rigger.modules.sticky as sticky
reload(sticky)
sticky.Sticky(up_bnd=pm.PyNode('CT_upper_lip_bnd'),
low_bnd=pm.PyNode('CT_lower_lip_bnd'),
center=pm.PyNode('CT__jaw_pri_ctrl'))
sticky.Sticky(up_bnd=pm.PyNode('LT_upperSide_lip_bnd'),
low_bnd=pm.PyNode('LT_lowerSide_lip_bnd'),
center=pm.PyNode('CT__jaw_pri_ctrl'))
sticky.Sticky(up_bnd=pm.PyNode('LT_upperSneer_lip_bnd'),
low_bnd=pm.PyNode('LT_lowerSneer_lip_bnd'),
center=pm.PyNode('CT__jaw_pri_ctrl'))
sticky.Sticky(up_bnd=pm.PyNode('LT_upperPinch_lip_bnd'),
low_bnd=pm.PyNode('LT_lowerPinch_lip_bnd'),
center=pm.PyNode('CT__jaw_pri_ctrl'))
sticky.Sticky(up_bnd=pm.PyNode('RT_upperSide_lip_bnd'),
low_bnd=pm.PyNode('RT_lowerSide_lip_bnd'),
center=pm.PyNode('CT__jaw_pri_ctrl'))
sticky.Sticky(up_bnd=pm.PyNode('RT_upperSneer_lip_bnd'),
low_bnd=pm.PyNode('RT_lowerSneer_lip_bnd'),
center=pm.PyNode('CT__jaw_pri_ctrl'))
sticky.Sticky(up_bnd=pm.PyNode('RT_upperPinch_lip_bnd'),
low_bnd=pm.PyNode('RT_lowerPinch_lip_bnd'),
center=pm.PyNode('CT__jaw_pri_ctrl'))
sticky.addStickyToFRS()
sticky.patchOldSticky()
#----------------------------------------------------------------- auto_sdks
if 'auto_sdks' in data.build_actions:
import utils.rigging as rt
pCtl = pm.PyNode('CT__mouthMover_pri_ctrl')
offsetGrp = priCtl.addOffset(pCtl, 'child', suffix='_autoRotate')
rt.connectSDK(pCtl.tx, offsetGrp.ry, {-1.2: -15, 0: 0, 1.2: 15})
rt.connectSDK(pCtl.tx, offsetGrp.rz, {-1.2: -12, 0: 0, 1.2: 12})
rt.connectSDK(pCtl.tx, offsetGrp.tz, {-1.2: 0.4, 0: 0, 1.2: 0.4})
# squint
pCtl = pm.PyNode('LT__squint_pri_ctrl')
offsetGrp = priCtl.addOffset(pCtl, 'parent', suffix='_autoVolume')
rt.connectSDK(pCtl.ty, offsetGrp.tz, {0: 0, 1: 0.5})
pCtl = pm.PyNode('RT__squint_pri_ctrl')
offsetGrp = priCtl.addOffset(pCtl, 'parent', suffix='_autoVolume')
rt.connectSDK(pCtl.ty, offsetGrp.tz, {0: 0, 1: 0.5})
# inbrow
import rigger.modules.secCtl as secCtl
reload(secCtl)
sCtl = pm.PyNode('LT_in_brow_ctrl')
offsetGrp = secCtl.addOffset(sCtl, 'parent', suffix='_autoVolume')
rt.connectSDK(sCtl.tx, offsetGrp.tz, {0: 0, -1: 0.2})
sCtl = pm.PyNode('RT_in_brow_ctrl')
offsetGrp = secCtl.addOffset(sCtl, 'parent', suffix='_autoVolume')
rt.connectSDK(sCtl.tx, offsetGrp.tz, {0: 0, 1: 0.2})
if 'finish_mathilda' in data.build_actions:
# a few mathilda specific things to finalize rig
# for demo reel purposes
# 1. lock all TZs for better volume
allCtls = pm.ls('*_ctrl', type='transform')
for ctl in allCtls:
ctl.tz.set(l=True, k=False)
# 2. hide eye aim locators
eyeAimLocs = [
nt.Transform(u'LT_eye_aim_loc'),
nt.Transform(u'RT_eye_aim_loc')
]
for loc in eyeAimLocs:
loc.v.set(False)
# 3. go to object mode so we can select controls
pm.selectMode(object=True)
# 4. bind tongue and teeth
geos = [
nt.Transform(u'CT_lowerGums_geo'),
nt.Transform(u'CT_tongue_geo'),
nt.Transform(u'CT_lowerTeeth_geo')
]
for geo in geos:
pm.parentConstraint(pm.PyNode('CT__jaw_bnd'), geo, mo=True)
'''
# 5. reference all geos to make it easier to select controls
allGeos = pm.PyNode('CT_geo_grp').getChildren(ad=True, type='mesh')
for geo in allGeos:
geo.overrideEnabled.set(True)
geo.overrideDisplayType.set(True)
'''
# 6. smooth face mesh to make it look nicer
pm.PyNode('CT_face_geoShape').displaySmoothMesh.set(2)
def build():
'''
'''
mesh = nt.Mesh(u'CT_face_geoShape')
placementGrp = nt.Transform(u'CT_placement_grp')
#---------------------------------------------------------------------- bind
if 'bind' in data.build_actions:
bindGrp = face.createBndsFromPlacement(placementGrp)
else:
bindGrp = nt.Transform(u'CT_bnd_grp')
#--------------------------------------------------------- sec motion system
if 'sec_motion_system' in data.build_actions:
face.buildSecondaryControlSystem(placementGrp, bindGrp, mesh)
#------------------------------------------------------------ pri ctl system first
if 'primary_ctl_system_first' in data.build_actions:
# run a simple first pass
# which can be used to block out mappings
bndsForPriCtls = data.all_bnds_for_priCtls
priCtl.setupPriCtlFirstPass(bindGrp, bndsForPriCtls)
priCtl.driveAttachedPriCtlsRun(bindGrp)
#------------------------------------------------------------ pri ctl system second
if 'primary_ctl_system_second' in data.build_actions:
if data.priCtlMappings:
# if priCtlMappings is set up, use the data
priCtlMappings = data.priCtlMappings
priCtl.setupPriCtlSecondPass(priCtlMappings)
priCtl.driveAttachedPriCtlsRun(bindGrp)
else:
pm.warning('no data for pri ctl system')
#-------------------------------------------------------------- load weights
if 'load_weights' in data.build_actions:
priCtlMappings = data.priCtlMappings
priCtl.setPriCtlFirstPassWeights(priCtlMappings)
#--------------------------------------------------------------------- clean
if 'clean' in data.build_actions:
face.cleanFaceRig()
#-------------------------------------------------------- surface constraint
if 'surface_constraint' in data.build_actions:
createSurfaceContraint()
#---------------------------------------------------------------------- eyes
if 'eyes' in data.build_actions:
buildEyeRig(placementGrp)
#------------------------------------------------------------------ eyeballs
if 'eyeballs' in data.build_actions:
#------------------------------------------ EYEBALL RIG (SIMPLE AIM CONSTRAINTS)
eye.buildEyeballRig()
eye.addEyeAim(prefix='LT_', distance=25) # BROKEN if there is already a
# node named LT_eyeball_grp!!!
eye.addEyeAim(prefix='RT_', distance=25) # BROKEN
#--------------------------------------------------------------- sticky lips
if 'sticky_lips' in data.build_actions:
addStickyLips()
def build():
'''
'''
mesh = nt.Mesh(u'CT_face_geoShape')
placementGrp = nt.Transform(u'CT_placement_grp')
#---------------------------------------------------------------------- bind
if 'bind' in data.build_actions:
bindGrp = face.createBndsFromPlacement(placementGrp)
pm.refresh()
else:
bindGrp = nt.Transform(u'CT_bnd_grp')
#--------------------------------------------------------- sec motion system
if 'sec_motion_system' in data.build_actions:
face.buildSecondaryControlSystem(placementGrp, bindGrp, mesh)
pm.refresh()
#------------------------------------------------------------ pri ctl system first
if 'primary_ctl_system_first' in data.build_actions:
# run a simple first pass
# which can be used to block out mappings
bndsForPriCtls = data.all_bnds_for_priCtls
priCtl.setupPriCtlFirstPass(bindGrp, bndsForPriCtls)
priCtl.driveAttachedPriCtlsRun(bindGrp)
#------------------------------------------------------------ pri ctl system second
if 'primary_ctl_system_second' in data.build_actions:
if data.priCtlMappings:
# if priCtlMappings is set up, use the data
priCtlMappings = data.priCtlMappings
priCtl.setupPriCtlSecondPass(priCtlMappings)
priCtl.driveAttachedPriCtlsRun(bindGrp)
pm.refresh()
else:
pm.warning('no data for pri ctl system')
#-------------------------------------------------------------- load weights
if 'load_weights' in data.build_actions:
priCtlWeights = data.priCtlWeights
priCtl.setPriCtlSecondPassWeights(priCtlWeights)
pm.refresh()
#--------------------------------------------------------------------- clean
if 'clean' in data.build_actions:
print 'clean'
face.cleanFaceRig()
pm.select(cl=True)
pm.refresh()
#--------------------------------------------------------------- skin_layers
if 'skin_layers' in data.build_actions:
# initial bind
mll = skin.setupSkinLayers(None, layers=[['base', None]])
# split masks for up and low lips
upVerts, lowVerts = skin.splitLipsVertices(mll)
mll = skin.setupSkinLayers(mll, layers=[['neck', None],
('jaw', lowVerts),
('cheeks', upVerts),
('chin', lowVerts),
('crease', upVerts),
('lips', None),
('nose', None),
('brow', None)
])
_, skn = mll.getTargetInfo()
pm.PyNode(skn).skinningMethod.set(1)
pm.PyNode(skn).deformUserNormals.set(0)
#---------------------------------------------------------------------- eyes
if 'eyes' in data.build_actions:
buildEyeRig(placementGrp)
#------------------------------------------------------------------ eyeballs
if 'eyeballs' in data.build_actions:
#------------------------------------------ EYEBALL RIG (SIMPLE AIM CONSTRAINTS)
eye.buildEyeballRig()
eye.addEyeAim(prefix='LT_', distance=25) # BROKEN if there is already a
# node named LT_eyeball_grp!!!
eye.addEyeAim(prefix='RT_', distance=25) # BROKEN
#--------------------------------------------------------------- fleshy_eyes
if 'fleshy_eyes' in data.build_actions:
import rigger.modules.poseReader as poseReader
reload(poseReader)
xfo = pm.PyNode('LT_eyeball_bnd')
poseReader.radial_pose_reader(xfo)
xfo = pm.PyNode('RT_eyeball_bnd')
poseReader.radial_pose_reader(xfo)
eye.addFleshyEye()
#--------------------------------------------------------------- sticky lips
if 'sticky_lips' in data.build_actions:
import rigger.modules.sticky as sticky
reload(sticky)
sticky.Sticky(up_bnd=pm.PyNode('CT_upper_lip_bnd'),
low_bnd=pm.PyNode('CT_lower_lip_bnd'),
center=pm.PyNode('CT__jaw_pri_ctrl'))
sticky.Sticky(up_bnd=pm.PyNode('LT_upperSide_lip_bnd'),
low_bnd=pm.PyNode('LT_lowerSide_lip_bnd'),
center=pm.PyNode('CT__jaw_pri_ctrl'))
sticky.Sticky(up_bnd=pm.PyNode('LT_upperSneer_lip_bnd'),
low_bnd=pm.PyNode('LT_lowerSneer_lip_bnd'),
center=pm.PyNode('CT__jaw_pri_ctrl'))
sticky.Sticky(up_bnd=pm.PyNode('LT_upperPinch_lip_bnd'),
low_bnd=pm.PyNode('LT_lowerPinch_lip_bnd'),
center=pm.PyNode('CT__jaw_pri_ctrl'))
sticky.Sticky(up_bnd=pm.PyNode('RT_upperSide_lip_bnd'),
low_bnd=pm.PyNode('RT_lowerSide_lip_bnd'),
center=pm.PyNode('CT__jaw_pri_ctrl'))
sticky.Sticky(up_bnd=pm.PyNode('RT_upperSneer_lip_bnd'),
low_bnd=pm.PyNode('RT_lowerSneer_lip_bnd'),
center=pm.PyNode('CT__jaw_pri_ctrl'))
sticky.Sticky(up_bnd=pm.PyNode('RT_upperPinch_lip_bnd'),
low_bnd=pm.PyNode('RT_lowerPinch_lip_bnd'),
center=pm.PyNode('CT__jaw_pri_ctrl'))
sticky.addStickyToFRS()
sticky.patchOldSticky()
#----------------------------------------------------------------- auto_sdks
if 'auto_sdks' in data.build_actions:
import utils.rigging as rt
pCtl = pm.PyNode('CT__mouthMover_pri_ctrl')
offsetGrp = priCtl.addOffset(pCtl, 'child', suffix='_autoRotate')
rt.connectSDK(pCtl.tx, offsetGrp.ry, {-1.2:-15, 0:0, 1.2:15})
rt.connectSDK(pCtl.tx, offsetGrp.rz, {-1.2:-12, 0:0, 1.2:12})
rt.connectSDK(pCtl.tx, offsetGrp.tz, {-1.2:0.4, 0:0, 1.2:0.4})
# squint
pCtl = pm.PyNode('LT__squint_pri_ctrl')
offsetGrp = priCtl.addOffset(pCtl, 'parent', suffix='_autoVolume')
rt.connectSDK(pCtl.ty, offsetGrp.tz, {0:0, 1:0.5})
pCtl = pm.PyNode('RT__squint_pri_ctrl')
offsetGrp = priCtl.addOffset(pCtl, 'parent', suffix='_autoVolume')
rt.connectSDK(pCtl.ty, offsetGrp.tz, {0:0, 1:0.5})
# inbrow
import rigger.modules.secCtl as secCtl
reload(secCtl)
sCtl = pm.PyNode('LT_in_brow_ctrl')
offsetGrp = secCtl.addOffset(sCtl, 'parent', suffix='_autoVolume')
rt.connectSDK(sCtl.tx, offsetGrp.tz, {0:0, -1:0.2})
sCtl = pm.PyNode('RT_in_brow_ctrl')
offsetGrp = secCtl.addOffset(sCtl, 'parent', suffix='_autoVolume')
rt.connectSDK(sCtl.tx, offsetGrp.tz, {0:0, 1:0.2})
if 'finish_mathilda' in data.build_actions:
# a few mathilda specific things to finalize rig
# for demo reel purposes
# 1. lock all TZs for better volume
allCtls = pm.ls('*_ctrl', type='transform')
for ctl in allCtls:
ctl.tz.set(l=True, k=False)
# 2. hide eye aim locators
eyeAimLocs = [nt.Transform(u'LT_eye_aim_loc'),
nt.Transform(u'RT_eye_aim_loc')]
for loc in eyeAimLocs:
loc.v.set(False)
# 3. go to object mode so we can select controls
pm.selectMode(object=True)
# 4. bind tongue and teeth
'''
geos = [nt.Transform(u'CT_lowerGums_geo'),
nt.Transform(u'CT_tongue_geo'),
nt.Transform(u'CT_lowerTeeth_geo')]
'''
geos = [nt.Transform(u'CT_tongue_geo'),
nt.Transform(u'CT_lowerTeeth_geo')]
for geo in geos:
pm.parentConstraint(pm.PyNode('CT__jaw_bnd'), geo, mo=True)
'''
#===============================================================================
bndGrp = face.createBndsFromPlacement(pGrp)
face.buildSecondaryControlSystem(pGrp, bndGrp, mesh)
priCtls = face.buildPrimaryControlSystem()
perimeterGrp = face.addPerimeterBndSystem(mesh)
mll = face.createSkinLayers(mesh)
#------------------------------------------------------- SET PRIMARY CTL WEIGHTS
# all weights from facerigB_v010
allWeights = data.priCtlBndWeights
for attr, val in allWeights.items():
pm.Attribute(attr).set(val)
#------------------------------------------------------------------- RIG CLEANUP
face.cleanFaceRig()
# smooth necessary layers
face.selectVertsClosestToBnds(mll) # use this as a mask while smoothing
# skin weights cleanup - mathilda_facerigB_v005.0003.ma
# motion weights cleanup
#===============================================================================
# POST-BUILD ADD-ON FEATURES
# mathilda_facerigB_v008.ma
#===============================================================================
#--------------------------------------------------------- ADD LEFT EYE DEFORMER
edgeLoop = [pm.PyNode(edge) for edge in pGrp.leftEyelidLoop.get()]
eyePivot = pm.PyNode('LT_eyeball_geo')
#===============================================================================
bndGrp = face.createBndsFromPlacement(pGrp)
face.buildSecondaryControlSystem(pGrp, bndGrp, mesh)
priCtls = face.buildPrimaryControlSystem()
perimeterGrp = face.addPerimeterBndSystem(mesh)
mll = face.createSkinLayers(mesh)
#------------------------------------------------------- SET PRIMARY CTL WEIGHTS
# all weights from facerigB_v010
allWeights = data.priCtlBndWeights
for attr, val in allWeights.items():
pm.Attribute(attr).set(val)
#------------------------------------------------------------------- RIG CLEANUP
face.cleanFaceRig()
# smooth necessary layers
face.selectVertsClosestToBnds(mll) # use this as a mask while smoothing
# skin weights cleanup - mathilda_facerigB_v005.0003.ma
# motion weights cleanup
#===============================================================================
# POST-BUILD ADD-ON FEATURES
# mathilda_facerigB_v008.ma
#===============================================================================
#--------------------------------------------------------- ADD LEFT EYE DEFORMER
edgeLoop = [pm.PyNode(edge) for edge in pGrp.leftEyelidLoop.get()]
eyePivot = pm.PyNode('LT_eyeball_geo')