def buildHairRigFromGrp(crvGrp, jntsNum=3):
'''
hairGrp is a group with curves
Z-axis is used for joint chain's up vector
crvGrp = nt.Transform(u'RT_hairGrpE_crv_grp')
jntsNum = 3
'''
headLat = pm.PyNode('CT_headLattice_dfm')
headSkn = pm.PyNode('NEWGEO:CT_hair_geoShapeDeformed_skn')
crvs = crvGrp.getChildren(ad=True, type='nurbsCurve')
# create master for the group
masterCtl = createControl(crvGrp.replace('_crv_grp','_master'))
wMat = crvGrp.getMatrix(ws=True)
masterCtl[0].setMatrix(wMat, ws=True)
# add attrs for joint multipliers
for jntId in range(jntsNum):
# defaultMult = 1.0 / pow(2, jntId)
masterCtl[2].addAttr('jnt_%d_mult'%jntId, dv=1, k=True)
jntMults = [masterCtl[2].attr('jnt_%d_mult'%jntId) for jntId in range(jntsNum)]
# multiply for rotations
mds = []
for jntId in range(jntsNum):
md = pm.createNode('multiplyDivide', n=crvGrp.replace('_crv_grp','_master_rotMult%d'%jntId))
masterCtl[2].r >> md.input1
jntMults[jntId] >> md.input2X
jntMults[jntId] >> md.input2Y
jntMults[jntId] >> md.input2Z
mds.append(md)
# calculate upvector to orient joints
upVec = pm.dt.Vector(0,0,1) * wMat
upVec.normalize()
# build controls for hair strands
# iter through hair strands
# store nodes so we can group things later
wsDagList = []
wsSurfList = []
allCtlsList = []
dcmList = []
for crv in crvs:
# get points on curve
totalLen = crv.length()
sectionLens = [totalLen/jntsNum*jntId for jntId in range(jntsNum+1)]
params = [crv.findParamFromLength(length) for length in sectionLens]
points = [crv.getPointAtParam(param) for param in params]
# create controls
parentPnts = points[:-1]
childPnts = points[1:]
parentCtl = None
parentWsDag = None
for ctlId, pPnt, cPnt in zip(range(jntsNum), parentPnts, childPnts):
# calculate matrrix for control
xVec = (cPnt - pPnt ).normal()
yVec = upVec.cross(xVec).normal()
zVec = xVec.cross(yVec).normal()
mat = pm.dt.Matrix(xVec, yVec, zVec, pm.dt.Vector(pPnt))
# this matrix should be affected by the headLattice
latticeDag = pm.group(em=True, n=crv.replace('_crv','_latDag%d'%ctlId))
latticeDagHm = pm.group(latticeDag, n=crv.replace('_crv','_latDagHm%d'%ctlId))
latticeDagHm.setMatrix(mat, ws=True)
wsDag, surf = surfOffset.addOffset(latticeDag)
wsDagList.append(wsDag)
wsSurfList.append(surf)
# wsDag is the worldSpace transforms after headLattice deformation
surfOffset.addSurfToDeformer([surf], headLat)
# add control
ctlList = createControl(crv.replace('_crv','_ctl%d'%ctlId))
ctlList[0].setMatrix(mat, ws=True)
# get transforms from wsDag (from lattice deformations)
if parentCtl == None:
# no parent, so just use wsDag directly
xformPlug = wsDag.worldMatrix
allCtlsList.append(ctlList[0])
else:
# get inversematrix of parent
# so we can put this in parent space
mm = pm.createNode('multMatrix', n=crv.replace('_crv','_mm%d'%ctlId))
wsDag.worldMatrix >> mm.matrixIn[0]
parentWsDag.worldInverseMatrix >> mm.matrixIn[1]
xformPlug = mm.matrixSum
# hierarchy
ctlList[0].setParent(parentCtl)
# update for the next iteration
parentCtl = ctlList[2]
parentWsDag = wsDag
# set transforms on cth from xformPlug
dcm = pm.createNode('decomposeMatrix', n=crv.replace('_crv','_dcm%d'%ctlId))
dcmList.append(dcm)
xformPlug >> dcm.inputMatrix
dcm.outputTranslate >> ctlList[0].t
dcm.outputRotate >> ctlList[0].r
# connect master multipliers
mds[ctlId].output >> ctlList[1].r
# add joint under control
pm.select(cl=True)
jnt = pm.joint(n=crv.replace('_crv','_jnt%d'%ctlId))
jnt.setParent(ctlList[2])
jnt.setMatrix(pm.dt.Matrix())
# bind joint to skin cluster
headSkn.addInfluence(jnt, lw=True, wt=0)
bindPostMatrixPlug = jnt.worldMatrix.outputs(p=True)[0]
bindPreMatrixPlugName = bindPostMatrixPlug.replace('.matrix', '.bindPreMatrix')
bindPreMatrixPlug = pm.PyNode(bindPreMatrixPlugName)
wsDag.worldInverseMatrix >> bindPreMatrixPlug
# organize stuff
wsDagTops = [dag.getParent() for dag in wsDagList]
wsSurfTops = [dag.getParent(2) for dag in wsSurfList]
wsDagGrp = pm.group(wsDagTops, n=crvGrp.replace('_crv_grp','_wsDagGrp'))
wsSurfGrp = pm.group(wsSurfTops, n=crvGrp.replace('_crv_grp','_wsSurfGrp'))
ctlsGrp = pm.group(masterCtl[0], allCtlsList, n=crvGrp.replace('_crv_grp','_allCtlsGrp'))
masterGrp = pm.group(wsDagGrp, wsSurfGrp, crvGrp, n=crvGrp.replace('_crv_grp','_rig_grp'))
# move masterCtl with the first wsDag
origMat = masterCtl[0].getMatrix(ws=True)
dcmList[0].outputTranslate >> masterCtl[0].t
dcmList[0].outputRotate >> masterCtl[0].r
masterCtl[1].setMatrix(origMat, ws=True)
return ctlsGrp, masterGrp
nt.Transform(u'RT_upperInner_eyelid_ctrl_negRev'),
nt.Transform(u'RT_upper_eyelid_ctrl_negRev'),
nt.Transform(u'RT_upperOuter_eyelid_ctrl_negRev'),
nt.Transform(u'RT_outer_eyelid_ctrl_negRev'),
nt.Transform(u'RT_lowerOuter_eyelid_ctrl_negRev'),
nt.Transform(u'RT_lower_eyelid_ctrl_negRev'),
nt.Transform(u'RT_lowerInner_eyelid_ctrl_negRev'),
nt.Transform(u'RT_upper_eyelid_pri_ctrl_negRev'),
nt.Transform(u'RT_outer_eyelid_pri_ctrl_negRev'),
nt.Transform(u'RT_lower_eyelid_pri_ctrl_negRev'),
nt.Transform(u'RT_inner_eyelid_pri_ctrl_negRev'),
nt.Transform(u'RT__eyeMover_pri_ctrl_negRev'),
nt.Transform(u'LT_in_brow_ctrl_negRev'),
nt.Transform(u'LT_mid_brow_ctrl_negRev'),
nt.Transform(u'LT_out_brow_ctrl_negRev'),
nt.Transform(u'LT_mid_brow_pri_ctrl_negRev'),
nt.Transform(u'RT_mid_brow_ctrl_negRev'),
nt.Transform(u'RT_out_brow_ctrl_negRev'),
nt.Transform(u'RT_in_brow_ctrl_negRev'),
nt.Transform(u'RT_mid_brow_pri_ctrl_negRev')
]
offsets = []
for n in nodes:
offsetGrp = surfOffset.addOffset(n)
offsets.append(offsetGrp[1])
pm.select(offsets)
dfm = pm.PyNode('CT_spine_lattice_dfm')
surfOffset.addSurfToDeformer(offsets, dfm)
nt.Transform(u'RT_upperInner_eyelid_ctrl_negRev'),
nt.Transform(u'RT_upper_eyelid_ctrl_negRev'),
nt.Transform(u'RT_upperOuter_eyelid_ctrl_negRev'),
nt.Transform(u'RT_outer_eyelid_ctrl_negRev'),
nt.Transform(u'RT_lowerOuter_eyelid_ctrl_negRev'),
nt.Transform(u'RT_lower_eyelid_ctrl_negRev'),
nt.Transform(u'RT_lowerInner_eyelid_ctrl_negRev'),
nt.Transform(u'RT_upper_eyelid_pri_ctrl_negRev'),
nt.Transform(u'RT_outer_eyelid_pri_ctrl_negRev'),
nt.Transform(u'RT_lower_eyelid_pri_ctrl_negRev'),
nt.Transform(u'RT_inner_eyelid_pri_ctrl_negRev'),
nt.Transform(u'RT__eyeMover_pri_ctrl_negRev'),
nt.Transform(u'LT_in_brow_ctrl_negRev'),
nt.Transform(u'LT_mid_brow_ctrl_negRev'),
nt.Transform(u'LT_out_brow_ctrl_negRev'),
nt.Transform(u'LT_mid_brow_pri_ctrl_negRev'),
nt.Transform(u'RT_mid_brow_ctrl_negRev'),
nt.Transform(u'RT_out_brow_ctrl_negRev'),
nt.Transform(u'RT_in_brow_ctrl_negRev'),
nt.Transform(u'RT_mid_brow_pri_ctrl_negRev')]
offsets = []
for n in nodes:
offsetGrp = surfOffset.addOffset(n)
offsets.append(offsetGrp[1])
pm.select(offsets)
dfm = pm.PyNode('CT_spine_lattice_dfm')
surfOffset.addSurfToDeformer(offsets, dfm)
def buildHairRigFromGrp(crvGrp, jntsNum=3):
'''
hairGrp is a group with curves
Z-axis is used for joint chain's up vector
crvGrp = nt.Transform(u'RT_hairGrpE_crv_grp')
jntsNum = 3
'''
headLat = pm.PyNode('CT_headLattice_dfm')
headSkn = pm.PyNode('NEWGEO:CT_hair_geoShapeDeformed_skn')
crvs = crvGrp.getChildren(ad=True, type='nurbsCurve')
# create master for the group
masterCtl = createControl(crvGrp.replace('_crv_grp', '_master'))
wMat = crvGrp.getMatrix(ws=True)
masterCtl[0].setMatrix(wMat, ws=True)
# add attrs for joint multipliers
for jntId in range(jntsNum):
# defaultMult = 1.0 / pow(2, jntId)
masterCtl[2].addAttr('jnt_%d_mult' % jntId, dv=1, k=True)
jntMults = [
masterCtl[2].attr('jnt_%d_mult' % jntId) for jntId in range(jntsNum)
]
# multiply for rotations
mds = []
for jntId in range(jntsNum):
md = pm.createNode('multiplyDivide',
n=crvGrp.replace('_crv_grp',
'_master_rotMult%d' % jntId))
masterCtl[2].r >> md.input1
jntMults[jntId] >> md.input2X
jntMults[jntId] >> md.input2Y
jntMults[jntId] >> md.input2Z
mds.append(md)
# calculate upvector to orient joints
upVec = pm.dt.Vector(0, 0, 1) * wMat
upVec.normalize()
# build controls for hair strands
# iter through hair strands
# store nodes so we can group things later
wsDagList = []
wsSurfList = []
allCtlsList = []
dcmList = []
for crv in crvs:
# get points on curve
totalLen = crv.length()
sectionLens = [
totalLen / jntsNum * jntId for jntId in range(jntsNum + 1)
]
params = [crv.findParamFromLength(length) for length in sectionLens]
points = [crv.getPointAtParam(param) for param in params]
# create controls
parentPnts = points[:-1]
childPnts = points[1:]
parentCtl = None
parentWsDag = None
for ctlId, pPnt, cPnt in zip(range(jntsNum), parentPnts, childPnts):
# calculate matrrix for control
xVec = (cPnt - pPnt).normal()
yVec = upVec.cross(xVec).normal()
zVec = xVec.cross(yVec).normal()
mat = pm.dt.Matrix(xVec, yVec, zVec, pm.dt.Vector(pPnt))
# this matrix should be affected by the headLattice
latticeDag = pm.group(em=True,
n=crv.replace('_crv', '_latDag%d' % ctlId))
latticeDagHm = pm.group(latticeDag,
n=crv.replace('_crv',
'_latDagHm%d' % ctlId))
latticeDagHm.setMatrix(mat, ws=True)
wsDag, surf = surfOffset.addOffset(latticeDag)
wsDagList.append(wsDag)
wsSurfList.append(surf)
# wsDag is the worldSpace transforms after headLattice deformation
surfOffset.addSurfToDeformer([surf], headLat)
# add control
ctlList = createControl(crv.replace('_crv', '_ctl%d' % ctlId))
ctlList[0].setMatrix(mat, ws=True)
# get transforms from wsDag (from lattice deformations)
if parentCtl == None:
# no parent, so just use wsDag directly
xformPlug = wsDag.worldMatrix
allCtlsList.append(ctlList[0])
else:
# get inversematrix of parent
# so we can put this in parent space
mm = pm.createNode('multMatrix',
n=crv.replace('_crv', '_mm%d' % ctlId))
wsDag.worldMatrix >> mm.matrixIn[0]
parentWsDag.worldInverseMatrix >> mm.matrixIn[1]
xformPlug = mm.matrixSum
# hierarchy
ctlList[0].setParent(parentCtl)
# update for the next iteration
parentCtl = ctlList[2]
parentWsDag = wsDag
# set transforms on cth from xformPlug
dcm = pm.createNode('decomposeMatrix',
n=crv.replace('_crv', '_dcm%d' % ctlId))
dcmList.append(dcm)
xformPlug >> dcm.inputMatrix
dcm.outputTranslate >> ctlList[0].t
dcm.outputRotate >> ctlList[0].r
# connect master multipliers
mds[ctlId].output >> ctlList[1].r
# add joint under control
pm.select(cl=True)
jnt = pm.joint(n=crv.replace('_crv', '_jnt%d' % ctlId))
jnt.setParent(ctlList[2])
jnt.setMatrix(pm.dt.Matrix())
# bind joint to skin cluster
headSkn.addInfluence(jnt, lw=True, wt=0)
bindPostMatrixPlug = jnt.worldMatrix.outputs(p=True)[0]
bindPreMatrixPlugName = bindPostMatrixPlug.replace(
'.matrix', '.bindPreMatrix')
bindPreMatrixPlug = pm.PyNode(bindPreMatrixPlugName)
wsDag.worldInverseMatrix >> bindPreMatrixPlug
# organize stuff
wsDagTops = [dag.getParent() for dag in wsDagList]
wsSurfTops = [dag.getParent(2) for dag in wsSurfList]
wsDagGrp = pm.group(wsDagTops, n=crvGrp.replace('_crv_grp', '_wsDagGrp'))
wsSurfGrp = pm.group(wsSurfTops,
n=crvGrp.replace('_crv_grp', '_wsSurfGrp'))
ctlsGrp = pm.group(masterCtl[0],
allCtlsList,
n=crvGrp.replace('_crv_grp', '_allCtlsGrp'))
masterGrp = pm.group(wsDagGrp,
wsSurfGrp,
crvGrp,
n=crvGrp.replace('_crv_grp', '_rig_grp'))
# move masterCtl with the first wsDag
origMat = masterCtl[0].getMatrix(ws=True)
dcmList[0].outputTranslate >> masterCtl[0].t
dcmList[0].outputRotate >> masterCtl[0].r
masterCtl[1].setMatrix(origMat, ws=True)
return ctlsGrp, masterGrp
