def __init__(self, write_fun=None, config={}):
self.config = config
if write_fun is None:
@coroutine
def write(self, *args):
print(*args)
self.write = write
else:
self.write = write_fun
self.act_led = pyb.LED(3)
self.err_led = pyb.LED(1)
self.pkt_led = pyb.LED(2)
self.pots = [0] * 4
self.percolator = \
Percolator(WS2812(spi_bus=config['leds'].get('spi'),
led_count=config['leds'].get('qty')))
self.percolator.bingo = self.bingo
self.ws_rings = WS2812(2, 2 * 7 + 45)
self.ring_lights = Lights(self.ws_rings)
self.feed_rollers = [
Jewel7(lights=self.ring_lights[0:7]),
Jewel7(lights=self.ring_lights[7:14])
]
self.rr = RingRamp(lights=self.ring_lights[14:],
circumference=60, \
bottom=7, \
g=-40.0,
ball_check_fun = self.ball_check)
# self.zap_balls = False
self.set_brightness(31)
def setUp(self):
#logging.basicConfig(level=logging.INFO)
ws = self.ws = WS2812(1, 8)
lights = self.lights = Lights(ws)
# Fill the lattice with a recognizable pattern
for i, p in enumerate(tg(len(lights), 0)):
lat = lights.lattice[i]
for j, c in enumerate(p):
lat[j] = c
# The leds are all clear
self.assertEqual(sum(sum(c) for c in ws), 0)
self.rr = RingRamp(leds=lights.leds,
lattice=lights.lattice,
indexed_range=lights.indexed_range)
def __init__(self, write_fun=None, config={}):
self.config = config
if write_fun is None:
@coroutine
def write(self, *args):
print(*args)
self.write = write
else:
self.write = write_fun
self.act_led = pyb.LED(3)
self.err_led = pyb.LED(1)
self.pkt_led = pyb.LED(2)
self.pots = [0] * 4
self.percolator = \
Percolator(WS2812(spi_bus=config['leds'].get('spi'),
led_count=config['leds'].get('qty')))
self.percolator.bingo = self.bingo
self.ws_rings = WS2812(2, 2*7 + 45)
self.ring_lights = Lights(self.ws_rings)
self.feed_rollers = [Jewel7(lights=self.ring_lights[0:7]),
Jewel7(lights=self.ring_lights[7:14])]
self.rr = RingRamp(lights=self.ring_lights[14:],
circumference=60, \
bottom=7, \
g=-40.0,
ball_check_fun = self.ball_check)
# self.zap_balls = False
self.set_brightness(31)
class Lightshow:
def __init__(self, write_fun=None, config={}):
self.config = config
if write_fun is None:
@coroutine
def write(self, *args):
print(*args)
self.write = write
else:
self.write = write_fun
self.act_led = pyb.LED(3)
self.err_led = pyb.LED(1)
self.pkt_led = pyb.LED(2)
self.pots = [0] * 4
self.percolator = \
Percolator(WS2812(spi_bus=config['leds'].get('spi'),
led_count=config['leds'].get('qty')))
self.percolator.bingo = self.bingo
self.ws_rings = WS2812(2, 2 * 7 + 45)
self.ring_lights = Lights(self.ws_rings)
self.feed_rollers = [
Jewel7(lights=self.ring_lights[0:7]),
Jewel7(lights=self.ring_lights[7:14])
]
self.rr = RingRamp(lights=self.ring_lights[14:],
circumference=60, \
bottom=7, \
g=-40.0,
ball_check_fun = self.ball_check)
# self.zap_balls = False
self.set_brightness(31)
def set_brightness(self, v):
self.brightness = self.rr.brightness = self.percolator.brightness = v
self.feed_rollers[0].brightness = self.feed_rollers[1].brightness = v
@coroutine
def flash_LED(self, led, dur=1):
led.on()
yield from sleep(dur)
led.off()
@coroutine
def fuzzle(self, quit_name):
# For testing
while not getattr(self, quit_name):
#yield from self.flash_LED(self.err_led)
# More queue-costly but let's us proceed without waiting for photons
yield self.flash_LED(
self.err_led) # let a coro do it so we can proceed
yield from sleep(100)
assert getattr(self, quit_name)
setattr(self, quit_name, max(getattr(self, quit_name) - 1, 0))
@coroutine
def handle_pots(self, b):
for i in range(4):
self.pots[i] = big_endian_int(b[2 * i:2 * (i + 1)])
yield from self.show_pots()
@coroutine
def show_pots(self):
s = ', '.join("%d" % v for v in self.pots)
yield from self.supertitle("Pots: " + s)
@coroutine
def supertitle(self, text):
yield from self.write(b'\x1b[s\x1b[1;1H\x1b[2K')
yield from self.write(text)
yield from self.write('\x1b[u')
@coroutine
def perk(self, cli, cmd, rol):
sdelay, _, scolor = str(rol, 'ASCII').partition(' ')
try:
delay = int(sdelay)
except:
delay = 100
try:
color = eval(scolor)
except:
color = bytes((8, 0, 0))
if not hasattr(self.percolator, 'perk_quit'):
self.percolator.perk_quit = 0
yield self.percolator.perk(delay, color) # Launch this and return
def ball_check(self, ball, θ, ω):
# Checks a Ball and possibly affects it
# Return a list of balls to replace it
# (e.g. just [ball] to make no changes)
rv = []
# if self.zap_balls:
# ball.zap = True
# rv.append(ball)
# if θ > π:
# θ -= 2 * π
# elif θ <= -2.408554 <= ball.θ: # and ball.ω >= 0:
if θ <= -2.408554 <= ball.θ: # and ball.ω >= 0:
# crossed off the top of the "C"
# ball.zap = True
# rv.append(ball)
#print("θ=%f, ω=%f" % (θ, ω ))
#print("zapped %r" % ball)
self.loop.call_soon(self.perk_and_roll(100, ball.color))
#elif θ < 0.0 < ball.θ: # and ball.ω >= 0:
#elif θ < 0.0 < ball.θ or θ > 0.0 > ball.θ : # and ball.ω >= 0:
elif θ < 0.0 < ball.θ or \
θ > 0.0 > ball.θ and max(abs(θ), abs(ball.θ)) < 1.5: # and ball.ω >= 0:
# Crossed the centerline of the drive rollers
#print("rollered %r" % ball)
#ball.ω = max(ball.ω , 2.08)
# # Can't omit this ball, have to zap it for correct rendering
# ball.zap = True
# rv.append(ball)
# Grind this ball up into primary colors
color = list(iter(ball.color))
#Below does not grind up fused primaries of same color:
#colors = list(v for v in [(color[0], 0, 0),
# (0, color[1], 0),
# (0, 0, color[2])]
# if sum(v))
t = stoichiometric = self.percolator.stoichiometric
stoi_primaries = [(t[0], 0, 0), (0, t[1], 0), (0, 0, t[2])]
colors = []
for i in range(3):
while color[i] >= stoichiometric[i]:
colors.append(stoi_primaries[i])
color[i] -= stoichiometric[i]
if color[i]:
t = [0, 0, 0]
t[i] = color[i]
colors.append(tuple(t))
assert colors, colors # At least one
for c in colors:
rv.append(Ball(θ=0.1, ω=rand.gauss(4.5, 0.2), color=c))
#print(rv)
else:
rv.append(ball)
return rv
@coroutine
def perk_and_roll(self, speed, color, i=None):
out_color = yield from self.percolator.perk(speed, color, i)
if out_color is not None:
ball = Ball(θ=2 * π * -7 / 60, ω=0.3, color=out_color)
self.rr.balls.append(ball)
#else:
# print("perk yielded a None")
@coroutine
def bingo(self):
stars = list(range(7, 63, 7))
p = self.percolator
lattice = p.lattice
rand.shuffle(stars)
for i in stars:
yield from sleep(200)
color = tuple(lattice[i])
p.set_color_of(i, (0, 0, 0))
i = self.percolator.down(i, rng() & 1)
yield self.perk_and_roll(100, color, i)
@coroutine
def spin_feed_rollers(self):
lower, upper = self.feed_rollers
lower.center[2] = upper.center[2] = 1
v = 1.0
for i in range(len(lower.gear)):
lower.gear[i] = [v, 0, 0]
upper.gear[(3 - i) % len(lower.gear)] = [0, v, 0]
v *= 0.3
while True:
#time = self.loop.time
#then = time()
lower.gear.cw()
upper.gear.ccw()
lower.render()
upper.render()
#now = time()
#t = 20 - (now - then)
#then = now
#yield from sleep(t)
yield from sleep(20)
@coroutine
def manage_brightness(self):
a = pyb.ADC(pyb.Pin('Y12'))
amb = a.read() / 4096
while True:
v = a.read()
amb = 0.95 * amb + 0.05 * v / 4096
bv = 254 * amb + 1
self.set_brightness(bv)
yield from sleep(123)
@coroutine
def play(self, cli, cmd, rol):
yield self.percolator.play()
@coroutine
def stop(self, cli, cmd, rol):
self.percolator.play_on = False
yield
@coroutine
def master(self):
self.loop = yield GetRunningLoop(None)
yield self.manage_brightness()
yield self.percolator.keep_leds_current(10)
for i in range(7, 63, 7):
self.percolator.set_color_of(i, self.percolator.stoichiometric)
yield self.percolator.bingo()
yield self.rr.integrate_continuously()
yield self.spin_feed_rollers()
while True:
yield from self.flash_LED(self.act_led)
yield from sleep(1000)
def run(self):
loop = get_event_loop()
loop.run_until_complete(self.master())
class Lightshow:
def __init__(self, write_fun=None, config={}):
self.config = config
if write_fun is None:
@coroutine
def write(self, *args):
print(*args)
self.write = write
else:
self.write = write_fun
self.act_led = pyb.LED(3)
self.err_led = pyb.LED(1)
self.pkt_led = pyb.LED(2)
self.pots = [0] * 4
self.percolator = \
Percolator(WS2812(spi_bus=config['leds'].get('spi'),
led_count=config['leds'].get('qty')))
self.percolator.bingo = self.bingo
self.ws_rings = WS2812(2, 2*7 + 45)
self.ring_lights = Lights(self.ws_rings)
self.feed_rollers = [Jewel7(lights=self.ring_lights[0:7]),
Jewel7(lights=self.ring_lights[7:14])]
self.rr = RingRamp(lights=self.ring_lights[14:],
circumference=60, \
bottom=7, \
g=-40.0,
ball_check_fun = self.ball_check)
# self.zap_balls = False
self.set_brightness(31)
def set_brightness(self, v):
self.brightness = self.rr.brightness = self.percolator.brightness = v
self.feed_rollers[0].brightness = self.feed_rollers[1].brightness = v
@coroutine
def flash_LED(self, led, dur=1):
led.on()
yield from sleep(dur)
led.off()
@coroutine
def fuzzle(self, quit_name):
# For testing
while not getattr(self, quit_name):
#yield from self.flash_LED(self.err_led)
# More queue-costly but let's us proceed without waiting for photons
yield self.flash_LED(self.err_led) # let a coro do it so we can proceed
yield from sleep(100)
assert getattr(self, quit_name)
setattr(self, quit_name, max(getattr(self, quit_name) - 1, 0))
@coroutine
def handle_pots(self, b):
for i in range(4):
self.pots[i] = big_endian_int(b[2*i:2*(i+1)])
yield from self.show_pots()
@coroutine
def show_pots(self):
s = ', '.join("%d" % v for v in self.pots)
yield from self.supertitle("Pots: " + s)
@coroutine
def supertitle(self, text):
yield from self.write(b'\x1b[s\x1b[1;1H\x1b[2K')
yield from self.write(text)
yield from self.write('\x1b[u')
@coroutine
def perk(self, cli, cmd, rol):
sdelay, _, scolor = str(rol, 'ASCII').partition(' ')
try:
delay = int(sdelay)
except:
delay = 100
try:
color = eval(scolor)
except:
color = bytes((8,0,0))
if not hasattr(self.percolator, 'perk_quit'):
self.percolator.perk_quit = 0
yield self.percolator.perk(delay, color) # Launch this and return
def ball_check(self, ball, θ, ω ):
# Checks a Ball and possibly affects it
# Return a list of balls to replace it
# (e.g. just [ball] to make no changes)
rv = []
# if self.zap_balls:
# ball.zap = True
# rv.append(ball)
# if θ > π:
# θ -= 2 * π
# elif θ <= -2.408554 <= ball.θ: # and ball.ω >= 0:
if θ <= -2.408554 <= ball.θ: # and ball.ω >= 0:
# crossed off the top of the "C"
# ball.zap = True
# rv.append(ball)
#print("θ=%f, ω=%f" % (θ, ω ))
#print("zapped %r" % ball)
self.loop.call_soon(self.perk_and_roll(100, ball.color))
#elif θ < 0.0 < ball.θ: # and ball.ω >= 0:
#elif θ < 0.0 < ball.θ or θ > 0.0 > ball.θ : # and ball.ω >= 0:
elif θ < 0.0 < ball.θ or \
θ > 0.0 > ball.θ and max(abs(θ), abs(ball.θ)) < 1.5: # and ball.ω >= 0:
# Crossed the centerline of the drive rollers
#print("rollered %r" % ball)
#ball.ω = max(ball.ω , 2.08)
# # Can't omit this ball, have to zap it for correct rendering
# ball.zap = True
# rv.append(ball)
# Grind this ball up into primary colors
color = list(iter(ball.color))
#Below does not grind up fused primaries of same color:
#colors = list(v for v in [(color[0], 0, 0),
# (0, color[1], 0),
# (0, 0, color[2])]
# if sum(v))
t = stoichiometric = self.percolator.stoichiometric
stoi_primaries = [(t[0], 0, 0),
(0, t[1], 0),
(0, 0, t[2])]
colors = []
for i in range(3):
while color[i] >= stoichiometric[i]:
colors.append(stoi_primaries[i])
color[i] -= stoichiometric[i]
if color[i]:
t = [0, 0, 0]
t[i] = color[i]
colors.append(tuple(t))
assert colors, colors # At least one
for c in colors:
rv.append(Ball(θ=0.1, ω =rand.gauss(4.5, 0.2), color=c))
#print(rv)
else:
rv.append(ball)
return rv
@coroutine
def perk_and_roll(self, speed, color, i=None):
out_color = yield from self.percolator.perk(speed, color, i)
if out_color is not None:
ball = Ball(θ = 2*π * -7/60,
ω = 0.3,
color=out_color)
self.rr.balls.append(ball)
#else:
# print("perk yielded a None")
@coroutine
def bingo(self):
stars = list(range(7, 63, 7))
p = self.percolator
lattice = p.lattice
rand.shuffle(stars)
for i in stars:
yield from sleep(200)
color = tuple(lattice[i])
p.set_color_of(i, (0,0,0))
i = self.percolator.down(i, rng()&1)
yield self.perk_and_roll(100, color, i)
@coroutine
def spin_feed_rollers(self):
lower, upper = self.feed_rollers
lower.center[2] = upper.center[2] = 1
v = 1.0
for i in range(len(lower.gear)):
lower.gear[i] = [v, 0, 0]
upper.gear[(3-i)%len(lower.gear)] = [0, v, 0]
v *= 0.3
while True:
#time = self.loop.time
#then = time()
lower.gear.cw()
upper.gear.ccw()
lower.render()
upper.render()
#now = time()
#t = 20 - (now - then)
#then = now
#yield from sleep(t)
yield from sleep(20)
@coroutine
def manage_brightness(self):
a = pyb.ADC(pyb.Pin('Y12'))
amb = a.read()/4096
while True:
v = a.read()
amb = 0.95*amb + 0.05*v/4096
bv = 254*amb + 1
self.set_brightness(bv)
yield from sleep(123)
@coroutine
def play(self, cli, cmd, rol):
yield self.percolator.play()
@coroutine
def stop(self, cli, cmd, rol):
self.percolator.play_on = False
yield
@coroutine
def master(self):
self.loop = yield GetRunningLoop(None)
yield self.manage_brightness()
yield self.percolator.keep_leds_current(10)
for i in range(7, 63, 7):
self.percolator.set_color_of(i, self.percolator.stoichiometric)
yield self.percolator.bingo()
yield self.rr.integrate_continuously()
yield self.spin_feed_rollers()
while True:
yield from self.flash_LED(self.act_led)
yield from sleep(1000)
def run(self):
loop = get_event_loop()
loop.run_until_complete(self.master())