def accept(self):
"""Method invoked when OK button is clicked."""
self.save_state()
self.dock.show_busy()
# The order of the components are matter.
components = self.prepare_components()
error_code, message = self.impact_function.generate_report(
components, iface=self.iface)
if error_code == ImpactReport.REPORT_GENERATION_FAILED:
self.dock.hide_busy()
LOGGER.info(tr('The impact report could not be generated.'))
send_error_message(self, message)
LOGGER.info(message.to_text())
return ANALYSIS_FAILED_BAD_CODE, message
sender_name = self.sender().objectName()
try:
if sender_name == 'button_print_pdf':
self.create_pdf = True
self.open_as_pdf()
else:
self.create_pdf = False
self.open_in_composer()
self.dock.hide_busy()
except Exception:
self.dock.hide_busy()
QtWidgets.QDialog.accept(self)
def accept(self):
"""Method invoked when OK button is clicked."""
self.save_state()
self.dock.show_busy()
# The order of the components are matter.
components = self.prepare_components()
error_code, message = self.impact_function.generate_report(
components, iface=self.iface)
if error_code == ImpactReport.REPORT_GENERATION_FAILED:
self.dock.hide_busy()
LOGGER.info(tr(
'The impact report could not be generated.'))
send_error_message(self, message)
LOGGER.info(message.to_text())
return ANALYSIS_FAILED_BAD_CODE, message
sender_name = self.sender().objectName()
try:
if sender_name == 'button_print_pdf':
self.create_pdf = True
self.open_as_pdf()
else:
self.create_pdf = False
self.open_in_composer()
self.dock.hide_busy()
except Exception:
self.dock.hide_busy()
QtWidgets.QDialog.accept(self)
def analysis_error(self, exception, message):
"""A helper to spawn an error and halt processing.
An exception will be logged, busy status removed and a message
displayed.
.. note:: Copied from the dock
:param message: an ErrorMessage to display
:type message: ErrorMessage, Message
:param exception: An exception that was raised
:type exception: Exception
"""
self.hide_busy()
LOGGER.exception(message)
message = get_error_message(exception, context=message)
send_error_message(self, message)
self.analysisDone.emit(False)
def validate_impact_function(self):
"""Check validity of the current impact function."""
# Always set it to False
self.btn_run.setEnabled(False)
for combo in list(self.combos_exposures.values()):
if combo.count() == 1:
combo.setEnabled(False)
hazard = layer_from_combo(self.cbx_hazard)
aggregation = layer_from_combo(self.cbx_aggregation)
exposures = []
for combo in list(self.combos_exposures.values()):
exposures.append(layer_from_combo(combo))
exposures = [layer for layer in exposures if layer]
multi_exposure_if = MultiExposureImpactFunction()
multi_exposure_if.hazard = hazard
multi_exposure_if.exposures = exposures
multi_exposure_if.debug = False
multi_exposure_if.callback = self.progress_callback
if aggregation:
multi_exposure_if.use_selected_features_only = (
self.use_selected_only)
multi_exposure_if.aggregation = aggregation
else:
multi_exposure_if.crs = (
self.iface.mapCanvas().mapSettings().destinationCrs())
if len(self.ordered_expected_layers()) != 0:
self._multi_exposure_if.output_layers_ordered = (
self.ordered_expected_layers())
status, message = multi_exposure_if.prepare()
if status == PREPARE_SUCCESS:
self._multi_exposure_if = multi_exposure_if
self.btn_run.setEnabled(True)
send_static_message(self, ready_message())
self.list_layers_in_map_report.clear()
return
else:
disable_busy_cursor()
send_error_message(self, message)
self._multi_exposure_if = None
def analysis_error(self, exception, message):
"""A helper to spawn an error and halt processing.
An exception will be logged, busy status removed and a message
displayed.
.. note:: Copied from the dock
:param message: an ErrorMessage to display
:type message: ErrorMessage, Message
:param exception: An exception that was raised
:type exception: Exception
"""
self.hide_busy()
LOGGER.exception(message)
message = get_error_message(exception, context=message)
send_error_message(self, message)
self.analysisDone.emit(False)
def print_map_to_pdf(self, impact_report):
"""Print map to PDF given MapReport instance.
:param impact_report: Impact Report instance that is ready to print
:type impact_report: ImpactReport
"""
impact_report.setup_composition()
# Get Filename
map_title = impact_report.map_title
if map_title is not None:
default_file_name = map_title + '.pdf'
default_file_name = default_file_name.replace(' ', '_')
else:
send_error_message(
self, self.tr('Keyword "map_title" not found.'))
return
# Get output path
# noinspection PyCallByClass,PyTypeChecker
output_path = QtGui.QFileDialog.getSaveFileName(
self.parent,
self.tr('Write to PDF'),
os.path.join(temp_dir(), default_file_name),
self.tr('Pdf File (*.pdf)'))
output_path = str(output_path)
if output_path is None or output_path == '':
# noinspection PyTypeChecker
self.show_dynamic_message(
self,
m.Message(
m.Heading(self.tr('Map Creator'), **WARNING_STYLE),
m.Text(self.tr('Printing cancelled!'))))
return
try:
map_pdf_path, table_pdf_path = impact_report.print_to_pdf(
output_path)
# Make sure the file paths can wrap nicely:
wrapped_map_path = map_pdf_path.replace(os.sep, '<wbr>' + os.sep)
wrapped_table_path = table_pdf_path.replace(
os.sep, '<wbr>' + os.sep)
status = m.Message(
m.Heading(self.tr('Map Creator'), **INFO_STYLE),
m.Paragraph(self.tr('Your PDF was created....')),
m.Paragraph(self.tr(
'Opening using the default PDF viewer on your system. '
'The generated pdfs were saved as:')),
m.Paragraph(wrapped_map_path),
m.Paragraph(self.tr('and')),
m.Paragraph(wrapped_table_path))
# noinspection PyCallByClass,PyTypeChecker,PyArgumentList
QtGui.QDesktopServices.openUrl(
QtCore.QUrl.fromLocalFile(table_pdf_path))
# noinspection PyCallByClass,PyTypeChecker,PyArgumentList
QtGui.QDesktopServices.openUrl(
QtCore.QUrl.fromLocalFile(map_pdf_path))
# noinspection PyTypeChecker
self.show_dynamic_message(self, status)
except TemplateLoadingError, e:
send_error_message(self, get_error_message(e))
m.Paragraph(self.tr('and')),
m.Paragraph(wrapped_table_path))
# noinspection PyCallByClass,PyTypeChecker,PyArgumentList
QtGui.QDesktopServices.openUrl(
QtCore.QUrl.fromLocalFile(table_pdf_path))
# noinspection PyCallByClass,PyTypeChecker,PyArgumentList
QtGui.QDesktopServices.openUrl(
QtCore.QUrl.fromLocalFile(map_pdf_path))
# noinspection PyTypeChecker
self.show_dynamic_message(self, status)
except TemplateLoadingError, e:
send_error_message(self, get_error_message(e))
except Exception, e: # pylint: disable=broad-except
send_error_message(self, get_error_message(e))
def open_map_in_composer(self, impact_report):
"""Open map in composer given MapReport instance.
..note:: (AG) See https://github.com/AIFDR/inasafe/issues/911. We
need to set the composition to the composer before loading the
template.
:param impact_report: Impact Report to be opened in composer.
:type impact_report: ImpactReport
"""
impact_report.setup_composition()
self.composer = self.iface.createNewComposer()
self.composer.setComposition(impact_report.composition)
impact_report.load_template()
def run_task(self, task_item, status_item, count=0, index=''):
"""Run a single task.
:param task_item: Table task_item containing task name / details.
:type task_item: QTableWidgetItem
:param status_item: Table task_item that holds the task status.
:type status_item: QTableWidgetItem
:param count: Count of scenarios that have been run already.
:type count:
:param index: The index for the table item that will be run.
:type index: int
:returns: Flag indicating if the task succeeded or not.
:rtype: bool
"""
self.enable_busy_cursor()
for layer_group in self.layer_group_container:
layer_group.setVisible(False)
# set status to 'running'
status_item.setText(self.tr('Running'))
# .. see also:: :func:`appendRow` to understand the next 2 lines
variant = task_item.data(QtCore.Qt.UserRole)
value = variant[0]
result = True
if isinstance(value, str):
filename = value
# run script
try:
self.run_script(filename)
# set status to 'OK'
status_item.setText(self.tr('Script OK'))
except Exception as e: # pylint: disable=W0703
# set status to 'fail'
status_item.setText(self.tr('Script Fail'))
LOGGER.exception('Running macro failed. The exception: ' +
str(e))
result = False
elif isinstance(value, dict):
# start in new project if toggle is active
if self.start_in_new_project:
self.iface.newProject()
# create layer group
group_name = value['scenario_name']
self.layer_group = self.root.addGroup(group_name)
self.layer_group_container.append(self.layer_group)
# Its a dict containing files for a scenario
success, parameters = self.prepare_task(value)
if not success:
# set status to 'running'
status_item.setText(self.tr('Please update scenario'))
self.disable_busy_cursor()
return False
# If impact function parameters loaded successfully, initiate IF.
impact_function = ImpactFunction()
impact_function.hazard = parameters[layer_purpose_hazard['key']]
impact_function.exposure = (
parameters[layer_purpose_exposure['key']])
if parameters[layer_purpose_aggregation['key']]:
impact_function.aggregation = (
parameters[layer_purpose_aggregation['key']])
elif parameters['extent']:
impact_function.requested_extent = parameters['extent']
impact_function.requested_extent_crs = parameters['crs']
prepare_status, prepare_message = impact_function.prepare()
if prepare_status == PREPARE_SUCCESS:
LOGGER.info('Impact function ready')
status, message = impact_function.run()
if status == ANALYSIS_SUCCESS:
status_item.setText(self.tr('Analysis Success'))
impact_layer = impact_function.impact
if impact_layer.isValid():
layer_list = [
impact_layer,
parameters[layer_purpose_hazard['key']],
parameters[layer_purpose_exposure['key']],
parameters[layer_purpose_aggregation['key']]]
QgsMapLayerRegistry.instance().addMapLayers(
layer_list, False)
for layer in layer_list:
self.layer_group.addLayer(layer)
map_canvas = QgsMapLayerRegistry.instance().mapLayers()
for layer in map_canvas:
# turn of layer visibility if not impact layer
if map_canvas[layer].id() == impact_layer.id():
self.legend.setLayerVisible(
map_canvas[layer], True)
else:
self.legend.setLayerVisible(
map_canvas[layer], False)
# generate map report and impact report
try:
# this line is to save the impact report in default
# InaSAFE directory.
generate_impact_report(impact_function, self.iface)
generate_impact_map_report(
impact_function,
self.iface)
# this line is to save the report in user specified
# directory.
self.generate_pdf_report(
impact_function,
self.iface,
group_name)
except:
status_item.setText(
self.tr('Report failed to generate.'))
else:
LOGGER.info('Impact layer is invalid')
elif status == ANALYSIS_FAILED_BAD_INPUT:
LOGGER.info('Bad input detected')
elif status == ANALYSIS_FAILED_BAD_CODE:
LOGGER.info('Impact function encountered a bug')
else:
LOGGER.warning('Impact function not ready')
send_error_message(self, prepare_message)
else:
LOGGER.exception('Data type not supported: "%s"' % value)
result = False
self.disable_busy_cursor()
return result
def run_task(self, task_item, status_item, count=0, index=''):
"""Run a single task.
:param task_item: Table task_item containing task name / details.
:type task_item: QTableWidgetItem
:param status_item: Table task_item that holds the task status.
:type status_item: QTableWidgetItem
:param count: Count of scenarios that have been run already.
:type count:
:param index: The index for the table item that will be run.
:type index: int
:returns: Flag indicating if the task succeeded or not.
:rtype: bool
"""
self.enable_busy_cursor()
for layer_group in self.layer_group_container:
layer_group.setItemVisibilityChecked(False)
# set status to 'running'
status_item.setText(self.tr('Running'))
# .. see also:: :func:`appendRow` to understand the next 2 lines
variant = task_item.data(QtCore.Qt.UserRole)
value = variant[0]
result = True
if isinstance(value, str):
filename = value
# run script
try:
self.run_script(filename)
# set status to 'OK'
status_item.setText(self.tr('Script OK'))
except Exception as e: # pylint: disable=W0703
# set status to 'fail'
status_item.setText(self.tr('Script Fail'))
LOGGER.exception(
'Running macro failed. The exception: ' + str(e))
result = False
elif isinstance(value, dict):
# start in new project if toggle is active
if self.start_in_new_project:
self.iface.newProject()
# create layer group
group_name = value['scenario_name']
self.layer_group = self.root.addGroup(group_name)
self.layer_group_container.append(self.layer_group)
# Its a dict containing files for a scenario
success, parameters = self.prepare_task(value)
if not success:
# set status to 'running'
status_item.setText(self.tr('Please update scenario'))
self.disable_busy_cursor()
return False
directory = self.output_directory.text()
if self.scenario_directory_radio.isChecked():
directory = self.source_directory.text()
output_directory = os.path.join(directory, group_name)
if not os.path.exists(output_directory):
os.makedirs(output_directory)
# If impact function parameters loaded successfully, initiate IF.
impact_function = ImpactFunction()
impact_function.datastore = Folder(output_directory)
impact_function.datastore.default_vector_format = "geojson"
impact_function.hazard = parameters[layer_purpose_hazard['key']]
impact_function.exposure = (
parameters[layer_purpose_exposure['key']])
if parameters[layer_purpose_aggregation['key']]:
impact_function.aggregation = (
parameters[layer_purpose_aggregation['key']])
elif parameters['extent']:
impact_function.requested_extent = parameters['extent']
impact_function.crs = parameters['crs']
prepare_status, prepare_message = impact_function.prepare()
if prepare_status == PREPARE_SUCCESS:
LOGGER.info('Impact function ready')
status, message = impact_function.run()
if status == ANALYSIS_SUCCESS:
status_item.setText(self.tr('Analysis Success'))
impact_layer = impact_function.impact
if impact_layer.isValid():
layer_list = [
impact_layer,
impact_function.analysis_impacted,
parameters[layer_purpose_hazard['key']],
parameters[layer_purpose_exposure['key']],
parameters[layer_purpose_aggregation['key']]]
QgsProject.instance().addMapLayers(
layer_list, False)
for layer in layer_list:
self.layer_group.addLayer(layer)
map_canvas = QgsProject.instance().mapLayers()
for layer in map_canvas:
# turn of layer visibility if not impact layer
if map_canvas[layer].id() == impact_layer.id():
self.set_layer_visible(
map_canvas[layer], True)
else:
self.set_layer_visible(
map_canvas[layer], False)
# we need to set analysis_impacted as an active layer
# because we need to get all qgis variables that we
# need from this layer for infographic.
if self.iface:
self.iface.setActiveLayer(
impact_function.analysis_impacted)
report_directory = os.path.join(
output_directory, 'output')
# generate map report and impact report
try:
error_code, message = (
impact_function.generate_report(
all_default_report_components,
report_directory))
except BaseException:
status_item.setText(
self.tr('Report failed to generate.'))
else:
LOGGER.info('Impact layer is invalid')
elif status == ANALYSIS_FAILED_BAD_INPUT:
LOGGER.info('Bad input detected')
elif status == ANALYSIS_FAILED_BAD_CODE:
LOGGER.info(
'Impact function encountered a bug: %s' % message)
else:
LOGGER.warning('Impact function not ready')
send_error_message(self, prepare_message)
else:
LOGGER.exception('Data type not supported: "%s"' % value)
result = False
self.disable_busy_cursor()
return result
def setup_and_run_analysis(self):
"""Execute analysis after the tab is displayed.
Please check the code in dock.py accept(). It should follow
approximately the same code.
"""
self.show_busy()
# Read user's settings
self.read_settings()
# Prepare impact function from wizard dialog user input
self.impact_function = self.prepare_impact_function()
# Prepare impact function
status, message = self.impact_function.prepare()
# Check status
if status == PREPARE_FAILED_BAD_INPUT:
self.hide_busy()
LOGGER.info(tr(
'The impact function will not be able to run because of the '
'inputs.'))
LOGGER.info(message.to_text())
send_error_message(self, message)
return status, message
if status == PREPARE_FAILED_BAD_CODE:
self.hide_busy()
LOGGER.exception(tr(
'The impact function was not able to be prepared because of a '
'bug.'))
LOGGER.info(message.to_text())
send_error_message(self, message)
return status, message
# Start the analysis
status, message = self.impact_function.run()
# Check status
if status == ANALYSIS_FAILED_BAD_INPUT:
self.hide_busy()
LOGGER.info(tr(
'The impact function could not run because of the inputs.'))
LOGGER.info(message.to_text())
send_error_message(self, message)
return status, message
elif status == ANALYSIS_FAILED_BAD_CODE:
self.hide_busy()
LOGGER.exception(tr(
'The impact function could not run because of a bug.'))
LOGGER.exception(message.to_text())
send_error_message(self, message)
return status, message
LOGGER.info(tr('The impact function could run without errors.'))
# Add result layer to QGIS
add_impact_layers_to_canvas(self.impact_function, self.parent.iface)
# Some if-s i.e. zoom, debug, hide exposure
if self.zoom_to_impact_flag:
self.iface.zoomToActiveLayer()
qgis_exposure = (
QgsMapLayerRegistry.instance().mapLayer(
self.parent.exposure_layer.id()))
if self.hide_exposure_flag:
legend = self.iface.legendInterface()
legend.setLayerVisible(qgis_exposure, False)
# Generate impact report
error_code, message = generate_impact_report(
self.impact_function, self.parent.iface)
if error_code == ImpactReport.REPORT_GENERATION_FAILED:
self.hide_busy()
LOGGER.info(tr(
'The impact report could not be generated.'))
send_error_message(self, message)
LOGGER.info(message.to_text())
return ANALYSIS_FAILED_BAD_CODE, message
# Generate Impact Map Report
error_code, message = generate_impact_map_report(
self.impact_function, self.iface)
if error_code == ImpactReport.REPORT_GENERATION_FAILED:
self.hide_busy()
LOGGER.info(tr(
'The impact report could not be generated.'))
send_error_message(self, message)
LOGGER.info(message.to_text())
return ANALYSIS_FAILED_BAD_CODE, message
self.extent.set_last_analysis_extent(
self.impact_function.analysis_extent,
qgis_exposure.crs())
# Hide busy
self.hide_busy()
# Setup gui if analysis is done
self.setup_gui_analysis_done()
return ANALYSIS_SUCCESS, None
def setup_and_run_analysis(self):
"""Execute analysis after the tab is displayed.
Please check the code in dock.py accept(). It should follow
approximately the same code.
"""
self.show_busy()
# Read user's settings
self.read_settings()
# Prepare impact function from wizard dialog user input
self.impact_function = self.prepare_impact_function()
# Prepare impact function
status, message = self.impact_function.prepare()
# Check status
if status == PREPARE_FAILED_BAD_INPUT:
self.hide_busy()
LOGGER.info(
tr('The impact function will not be able to run because of the '
'inputs.'))
LOGGER.info(message.to_text())
send_error_message(self, message)
return status, message
if status == PREPARE_FAILED_BAD_CODE:
self.hide_busy()
LOGGER.exception(
tr('The impact function was not able to be prepared because of a '
'bug.'))
LOGGER.info(message.to_text())
send_error_message(self, message)
return status, message
# Start the analysis
status, message = self.impact_function.run()
# Check status
if status == ANALYSIS_FAILED_BAD_INPUT:
self.hide_busy()
LOGGER.info(
tr('The impact function could not run because of the inputs.'))
LOGGER.info(message.to_text())
send_error_message(self, message)
return status, message
elif status == ANALYSIS_FAILED_BAD_CODE:
self.hide_busy()
LOGGER.exception(
tr('The impact function could not run because of a bug.'))
LOGGER.exception(message.to_text())
send_error_message(self, message)
return status, message
LOGGER.info(tr('The impact function could run without errors.'))
# Add result layer to QGIS
add_impact_layers_to_canvas(self.impact_function, self.parent.iface)
# Some if-s i.e. zoom, debug, hide exposure
if self.zoom_to_impact_flag:
self.iface.zoomToActiveLayer()
qgis_exposure = (QgsMapLayerRegistry.instance().mapLayer(
self.parent.exposure_layer.id()))
if self.hide_exposure_flag:
legend = self.iface.legendInterface()
legend.setLayerVisible(qgis_exposure, False)
# Generate impact report
error_code, message = generate_impact_report(self.impact_function,
self.parent.iface)
if error_code == ImpactReport.REPORT_GENERATION_FAILED:
self.hide_busy()
LOGGER.info(tr('The impact report could not be generated.'))
send_error_message(self, message)
LOGGER.info(message.to_text())
return ANALYSIS_FAILED_BAD_CODE, message
# Generate Impact Map Report
error_code, message = generate_impact_map_report(
self.impact_function, self.iface)
if error_code == ImpactReport.REPORT_GENERATION_FAILED:
self.hide_busy()
LOGGER.info(tr('The impact report could not be generated.'))
send_error_message(self, message)
LOGGER.info(message.to_text())
return ANALYSIS_FAILED_BAD_CODE, message
self.extent.set_last_analysis_extent(
self.impact_function.analysis_extent, qgis_exposure.crs())
# Hide busy
self.hide_busy()
# Setup gui if analysis is done
self.setup_gui_analysis_done()
return ANALYSIS_SUCCESS, None
def setup_and_run_analysis(self):
"""Execute analysis after the tab is displayed.
Please check the code in dock.py accept(). It should follow
approximately the same code.
"""
self.show_busy()
# Read user's settings
self.read_settings()
# Prepare impact function from wizard dialog user input
self.impact_function = self.prepare_impact_function()
# Prepare impact function
status, message = self.impact_function.prepare()
message = basestring_to_message(message)
# Check status
if status == PREPARE_FAILED_BAD_INPUT:
self.hide_busy()
LOGGER.warning(
tr('The impact function will not be able to run because of the '
'inputs.'))
LOGGER.warning(message.to_text())
send_error_message(self, message)
return status, message
if status == PREPARE_FAILED_BAD_CODE:
self.hide_busy()
LOGGER.warning(
tr('The impact function was not able to be prepared because of a '
'bug.'))
LOGGER.exception(message.to_text())
send_error_message(self, message)
return status, message
# Start the analysis
status, message = self.impact_function.run()
message = basestring_to_message(message)
# Check status
if status == ANALYSIS_FAILED_BAD_INPUT:
self.hide_busy()
LOGGER.warning(
tr('The impact function could not run because of the inputs.'))
LOGGER.warning(message.to_text())
send_error_message(self, message)
return status, message
elif status == ANALYSIS_FAILED_BAD_CODE:
self.hide_busy()
LOGGER.warning(
tr('The impact function could not run because of a bug.'))
LOGGER.exception(message.to_text())
send_error_message(self, message)
return status, message
LOGGER.info(tr('The impact function could run without errors.'))
# Add result layer to QGIS
add_impact_layers_to_canvas(self.impact_function,
iface=self.parent.iface)
# Some if-s i.e. zoom, debug, hide exposure
if self.zoom_to_impact_flag:
self.iface.zoomToActiveLayer()
qgis_exposure = (QgsProject.instance().mapLayer(
self.parent.exposure_layer.id()))
if self.hide_exposure_flag and qgis_exposure is not None:
treeroot = QgsProject.instance().layerTreeRoot()
treelayer = treeroot.findLayer(qgis_exposure.id())
if treelayer:
treelayer.setItemVisibilityChecked(False)
# we only want to generate non pdf/qpt report
html_components = [standard_impact_report_metadata_html]
error_code, message = self.impact_function.generate_report(
html_components)
message = basestring_to_message(message)
if error_code == ImpactReport.REPORT_GENERATION_FAILED:
self.hide_busy()
LOGGER.info(tr('The impact report could not be generated.'))
send_error_message(self, message)
LOGGER.exception(message.to_text())
return ANALYSIS_FAILED_BAD_CODE, message
self.extent.set_last_analysis_extent(
self.impact_function.analysis_extent, qgis_exposure.crs())
# Hide busy
self.hide_busy()
# Setup gui if analysis is done
self.setup_gui_analysis_done()
return ANALYSIS_SUCCESS, None
def setup_and_run_analysis(self):
"""Execute analysis after the tab is displayed.
Please check the code in dock.py accept(). It should follow
approximately the same code.
"""
self.show_busy()
# Read user's settings
self.read_settings()
# Prepare impact function from wizard dialog user input
self.impact_function = self.prepare_impact_function()
# Prepare impact function
status, message = self.impact_function.prepare()
message = basestring_to_message(message)
# Check status
if status == PREPARE_FAILED_BAD_INPUT:
self.hide_busy()
LOGGER.warning(tr(
'The impact function will not be able to run because of the '
'inputs.'))
LOGGER.warning(message.to_text())
send_error_message(self, message)
return status, message
if status == PREPARE_FAILED_BAD_CODE:
self.hide_busy()
LOGGER.warning(tr(
'The impact function was not able to be prepared because of a '
'bug.'))
LOGGER.exception(message.to_text())
send_error_message(self, message)
return status, message
# Start the analysis
status, message = self.impact_function.run()
message = basestring_to_message(message)
# Check status
if status == ANALYSIS_FAILED_BAD_INPUT:
self.hide_busy()
LOGGER.warning(tr(
'The impact function could not run because of the inputs.'))
LOGGER.warning(message.to_text())
send_error_message(self, message)
return status, message
elif status == ANALYSIS_FAILED_BAD_CODE:
self.hide_busy()
LOGGER.warning(tr(
'The impact function could not run because of a bug.'))
LOGGER.exception(message.to_text())
send_error_message(self, message)
return status, message
LOGGER.info(tr('The impact function could run without errors.'))
# Add result layer to QGIS
add_impact_layers_to_canvas(
self.impact_function, iface=self.parent.iface)
# Some if-s i.e. zoom, debug, hide exposure
if self.zoom_to_impact_flag:
self.iface.zoomToActiveLayer()
qgis_exposure = (
QgsProject.instance().mapLayer(
self.parent.exposure_layer.id()))
if self.hide_exposure_flag and qgis_exposure is not None:
treeroot = QgsProject.instance().layerTreeRoot()
treelayer = treeroot.findLayer(qgis_exposure.id())
if treelayer:
treelayer.setItemVisibilityChecked(False)
# we only want to generate non pdf/qpt report
html_components = [standard_impact_report_metadata_html]
error_code, message = self.impact_function.generate_report(
html_components)
message = basestring_to_message(message)
if error_code == ImpactReport.REPORT_GENERATION_FAILED:
self.hide_busy()
LOGGER.info(tr(
'The impact report could not be generated.'))
send_error_message(self, message)
LOGGER.exception(message.to_text())
return ANALYSIS_FAILED_BAD_CODE, message
self.extent.set_last_analysis_extent(
self.impact_function.analysis_extent,
qgis_exposure.crs())
# Hide busy
self.hide_busy()
# Setup gui if analysis is done
self.setup_gui_analysis_done()
return ANALYSIS_SUCCESS, None
def accept(self):
"""Launch the multi exposure analysis."""
if not isinstance(self._multi_exposure_if,
MultiExposureImpactFunction):
# This should not happen as the "accept" button must be disabled if
# the impact function is not ready.
return ANALYSIS_FAILED_BAD_CODE, None
self.tab_widget.setCurrentIndex(2)
self.set_enabled_buttons(False)
enable_busy_cursor()
try:
code, message, exposure = self._multi_exposure_if.run()
message = basestring_to_message(message)
if code == ANALYSIS_FAILED_BAD_INPUT:
LOGGER.warning(
tr('The impact function could not run because of the inputs.'
))
send_error_message(self, message)
LOGGER.warning(message.to_text())
disable_busy_cursor()
self.set_enabled_buttons(True)
return code, message
elif code == ANALYSIS_FAILED_BAD_CODE:
LOGGER.warning(
tr('The impact function could not run because of a bug.'))
LOGGER.exception(message.to_text())
send_error_message(self, message)
disable_busy_cursor()
self.set_enabled_buttons(True)
return code, message
if setting('generate_report', True, bool):
LOGGER.info(
'Reports are going to be generated for the multiexposure.')
# Report for the multi exposure
report = [standard_multi_exposure_impact_report_metadata_html]
error_code, message = (
self._multi_exposure_if.generate_report(report))
message = basestring_to_message(message)
if error_code == ImpactReport.REPORT_GENERATION_FAILED:
LOGGER.warning('The impact report could not be generated.')
send_error_message(self, message)
LOGGER.exception(message.to_text())
disable_busy_cursor()
self.set_enabled_buttons(True)
return error_code, message
else:
LOGGER.warning(
'Reports are not generated because of your settings.')
display_warning_message_bar(
tr('Reports'),
tr('Reports are not going to be generated because of your '
'InaSAFE settings.'),
duration=10,
iface_object=self.iface)
# We always create the multi exposure group because we need
# reports to be generated.
root = QgsProject.instance().layerTreeRoot()
if len(self.ordered_expected_layers()) == 0:
group_analysis = root.insertGroup(0,
self._multi_exposure_if.name)
group_analysis.setItemVisibilityChecked(True)
group_analysis.setCustomProperty(MULTI_EXPOSURE_ANALYSIS_FLAG,
True)
for layer in self._multi_exposure_if.outputs:
QgsProject.instance().addMapLayer(layer, False)
layer_node = group_analysis.addLayer(layer)
layer_node.setItemVisibilityChecked(False)
# set layer title if any
try:
title = layer.keywords['title']
if qgis_version() >= 21800:
layer.setName(title)
else:
layer.setLayerName(title)
except KeyError:
pass
for analysis in self._multi_exposure_if.impact_functions:
detailed_group = group_analysis.insertGroup(
0, analysis.name)
detailed_group.setItemVisibilityChecked(True)
add_impact_layers_to_canvas(analysis, group=detailed_group)
if self.iface:
self.iface.setActiveLayer(
self._multi_exposure_if.analysis_impacted)
else:
add_layers_to_canvas_with_custom_orders(
self.ordered_expected_layers(), self._multi_exposure_if,
self.iface)
if setting('generate_report', True, bool):
LOGGER.info(
'Reports are going to be generated for each single '
'exposure.')
# Report for the single exposure with hazard
for analysis in self._multi_exposure_if.impact_functions:
# we only want to generate non pdf/qpt report
html_components = [standard_impact_report_metadata_html]
error_code, message = (
analysis.generate_report(html_components))
message = basestring_to_message(message)
if error_code == (ImpactReport.REPORT_GENERATION_FAILED):
LOGGER.info(
'The impact report could not be generated.')
send_error_message(self, message)
LOGGER.info(message.to_text())
disable_busy_cursor()
self.set_enabled_buttons(True)
return error_code, message
else:
LOGGER.info(
'Reports are not generated because of your settings.')
display_warning_message_bar(
tr('Reports'),
tr('Reports are not going to be generated because of your '
'InaSAFE settings.'),
duration=10,
iface_object=self.iface)
# If zoom to impact is enabled
if setting('setZoomToImpactFlag', expected_type=bool):
self.iface.zoomToActiveLayer()
# If hide exposure layers
if setting('setHideExposureFlag', expected_type=bool):
treeroot = QgsProject.instance().layerTreeRoot()
for combo in list(self.combos_exposures.values()):
layer = layer_from_combo(combo)
if layer is not None:
treelayer = treeroot.findLayer(layer.id())
if treelayer:
treelayer.setItemVisibilityChecked(False)
# Set last analysis extent
self._extent.set_last_analysis_extent(
self._multi_exposure_if.analysis_extent,
self._multi_exposure_if.crs)
self.done(QDialog.Accepted)
except Exception as e:
error_message = get_error_message(e)
send_error_message(self, error_message)
LOGGER.exception(e)
LOGGER.debug(error_message.to_text())
finally:
disable_busy_cursor()
self.set_enabled_buttons(True)
def print_map_to_pdf(self, impact_report):
"""Print map to PDF given MapReport instance.
:param impact_report: Impact Report instance that is ready to print
:type impact_report: ImpactReport
"""
impact_report.setup_composition()
# Get Filename
map_title = impact_report.map_title
if map_title is not None:
default_file_name = map_title + '.pdf'
default_file_name = default_file_name.replace(' ', '_')
else:
send_error_message(
self, self.tr('Keyword "map_title" not found.'))
return
# Get output path
# noinspection PyCallByClass,PyTypeChecker
output_path = QtGui.QFileDialog.getSaveFileName(
self.parent,
self.tr('Write to PDF'),
os.path.join(temp_dir(), default_file_name),
self.tr('Pdf File (*.pdf)'))
output_path = str(output_path)
if output_path is None or output_path == '':
# noinspection PyTypeChecker
self.show_dynamic_message(
self,
m.Message(
m.Heading(self.tr('Map Creator'), **WARNING_STYLE),
m.Text(self.tr('Printing cancelled!'))))
return
try:
map_pdf_path, table_pdf_path = impact_report.print_to_pdf(
output_path)
# Make sure the file paths can wrap nicely:
wrapped_map_path = map_pdf_path.replace(os.sep, '<wbr>' + os.sep)
wrapped_table_path = table_pdf_path.replace(
os.sep, '<wbr>' + os.sep)
status = m.Message(
m.Heading(self.tr('Map Creator'), **INFO_STYLE),
m.Paragraph(self.tr('Your PDF was created....')),
m.Paragraph(self.tr(
'Opening using the default PDF viewer on your system. '
'The generated pdfs were saved as:')),
m.Paragraph(wrapped_map_path),
m.Paragraph(self.tr('and')),
m.Paragraph(wrapped_table_path))
# noinspection PyCallByClass,PyTypeChecker,PyArgumentList
QtGui.QDesktopServices.openUrl(
QtCore.QUrl.fromLocalFile(table_pdf_path))
# noinspection PyCallByClass,PyTypeChecker,PyArgumentList
QtGui.QDesktopServices.openUrl(
QtCore.QUrl.fromLocalFile(map_pdf_path))
# noinspection PyTypeChecker
self.show_dynamic_message(self, status)
except TemplateLoadingError, e:
send_error_message(self, get_error_message(e))
m.Paragraph(self.tr('and')),
m.Paragraph(wrapped_table_path))
# noinspection PyCallByClass,PyTypeChecker,PyArgumentList
QtGui.QDesktopServices.openUrl(
QtCore.QUrl.fromLocalFile(table_pdf_path))
# noinspection PyCallByClass,PyTypeChecker,PyArgumentList
QtGui.QDesktopServices.openUrl(
QtCore.QUrl.fromLocalFile(map_pdf_path))
# noinspection PyTypeChecker
self.show_dynamic_message(self, status)
except TemplateLoadingError, e:
send_error_message(self, get_error_message(e))
except Exception, e: # pylint: disable=broad-except
send_error_message(self, get_error_message(e))
def open_map_in_composer(self, impact_report):
"""Open map in composer given MapReport instance.
..note:: (AG) See https://github.com/AIFDR/inasafe/issues/911. We
need to set the composition to the composer before loading the
template.
:param impact_report: Impact Report to be opened in composer.
:type impact_report: ImpactReport
"""
impact_report.setup_composition()
self.composer = self.iface.createNewComposer()
self.composer.setComposition(impact_report.composition)
impact_report.load_template()