def create_insert(db, ImageHeader, FileNameString, PipelineFileNameString):
#set up all the image header variables
ExposureTimeString = createstring(ImageHeader, 'EXPTIME', '%5.3f')
TelEpochString = createstring(ImageHeader, 'EQUINOX', '%6.2f', '2000.0')
TargetNameString = createstring(ImageHeader, 'OBJECT', '%s')
InstrueNameString = createstring(ImageHeader, 'INSTRUME', '%s')
ObsModeString = createstring(ImageHeader, 'OBSMODE', '%s')
DetModeString = createstring(ImageHeader, 'DETMODE', '%s')
InstrueNameString = createstring(ImageHeader, 'INSTRUME', '%s')
ProposalCodeString = createstring(ImageHeader,
'PROPID',
'%s',
default='UNKNOWN')
ObservatString = createstring(ImageHeader, 'OBSERVAT', '%s')
ProposalString = createstring(ImageHeader, 'PROPOSAL', '%s')
#get the ProposalCode_Id
if not ProposalCodeString.strip():
ProposalCodeString = 'NONE'
ProposalCodeId = getpropcodeid(db, ProposalCodeString)
#set the pipeline strings that are a little more difficult to set
try:
UTStartString = ImageHeader['DATE-OBS'] + ' ' + ImageHeader['TIME-OBS']
except:
UTStartString = '1000-01-01 00:00:00'
if not UTStartString.strip():
UTStartString = '1000-01-01 00:00:00'
try:
TelRA = 15.0 * sex2dec(ImageHeader['TELRA'])
TelDec = sex2dec(ImageHeader['TELDEC'])
TelRAString = '%10.7f' % TelRA
TelDecString = '%10.7f' % TelDec
except Exception, e:
UTStartString = '1000-01-01 00:00:00'
TelRAString = '0.00000'
TelDecString = '100.0000'
def create_insert(db, ImageHeader, FileNameString, PipelineFileNameString):
#set up all the image header variables
ExposureTimeString=createstring(ImageHeader, 'EXPTIME', '%5.3f')
TelEpochString=createstring(ImageHeader, 'EQUINOX', '%6.2f')
TargetNameString=createstring(ImageHeader, 'OBJECT', '%s')
InstrueNameString=createstring(ImageHeader, 'INSTRUME', '%s')
ObsModeString=createstring(ImageHeader, 'OBSMODE', '%s')
DetModeString=createstring(ImageHeader, 'DETMODE', '%s')
InstrueNameString=createstring(ImageHeader, 'INSTRUME', '%s')
ProposalCodeString=createstring(ImageHeader, 'PROPID', '%s', default='UNKNOWN')
ObservatString=createstring(ImageHeader, 'OBSERVAT', '%s')
ProposalString=createstring(ImageHeader, 'PROPOSAL', '%s')
#get the ProposalCode_Id
if not ProposalCodeString.strip():
ProposalCodeString='NONE'
ProposalCodeId=getpropcodeid(db, ProposalCodeString)
#set the pipeline strings that are a little more difficult to set
try:
UTStartString=ImageHeader['DATE-OBS']+' '+ImageHeader['TIME-OBS']
except:
UTStartString='1000-01-01 00:00:00'
if not UTStartString.strip():
UTStartString='1000-01-01 00:00:00'
try:
TelRA=15.0*sex2dec(ImageHeader['TELRA'])
TelDec=sex2dec(ImageHeader['TELDEC'])
TelRAString='%10.7f' % TelRA
TelDecString='%10.7f' % TelDec
except Exception, e:
UTStartString='1000-01-01 00:00:00'
TelRAString='0.00000'
TelDecString='100.0000'
def updateheaders(struct, ext, tdiff, real_expt, utc, infile):
# exit if tdiff wasn't updated
if tdiff == real_expt:
msg='No adequate correction found for frame %i in file %s' % (ext, infile)
raise SaltError(msg)
return struct
# calculate the new utc value
try:
ntime=salttime.sex2dec(utc)
ntime=ntime-tdiff/3600.0
newutc=salttime.dec2sex(ntime)
except Exception as e:
msg='Could not update UTC in %i header of image %s because %s' % (ext, infile, e)
raise SaltError(msg)
return struct
# update the headers
if utc==saltsafekey.get('UTC-OBS', struct):
expt_string='%5.4f' % real_expt
td_string='%5.4f' % tdiff
if not saltsafekey.found('DUTC', struct):
try:
saltsafekey.put('UTC-OBS', newutc, struct, infile)
saltsafekey.put('TIME-OBS', newutc, struct, infile)
saltsafekey.new('DWETIME', expt_string, 'Dwell Time', struct, infile)
saltsafekey.new('DUTC', td_string, 'Change in UTC time', struct, infile)
except Exception as e:
msg='Could not update %i header of image %s because %s' % (ext, infile, e)
raise SaltIOError(msg)
else:
try:
saltsafekey.put('UTC-OBS', newutc, struct, infile)
saltsafekey.put('TIME-OBS', newutc, struct, infile)
saltsafekey.put('DWETIME', real_expt, struct, infile)
saltsafekey.put('DUTC', tdiff, struct, infile)
except Exception as e:
msg='Could not update %i header of image %s because %s' % (ext, infile, e)
raise SaltError(msg)
else:
raise SaltIOError('Frame missing from list of times')
return struct
def updateheaders(struct, ext, tdiff, real_expt, utc, infile):
# exit if tdiff wasn't updated
if tdiff == real_expt:
msg='No adequate correction found for frame %i in file %s' % (ext, infile)
raise SaltError(msg)
return struct
# calculate the new utc value
try:
ntime=salttime.sex2dec(utc)
ntime=ntime-tdiff/3600.0
newutc=salttime.dec2sex(ntime)
except Exception,e:
msg='Could not update UTC in %i header of image %s because %s' % (ext, infile, e)
raise SaltError(msg)
return struct
def updateheaders(struct, ext, tdiff, real_expt, utc, infile):
# exit if tdiff wasn't updated
if tdiff == real_expt:
msg = 'No adequate correction found for frame %i in file %s' % (ext,
infile)
raise SaltError(msg)
return struct
# calculate the new utc value
try:
ntime = salttime.sex2dec(utc)
ntime = ntime - tdiff / 3600.0
newutc = salttime.dec2sex(ntime)
except Exception, e:
msg = 'Could not update UTC in %i header of image %s because %s' % (
ext, infile, e)
raise SaltError(msg)
return struct
def create_insert(db, ImageHeader, FileNameString, PipelineFileNameString):
#set up all the image header variables
ExposureTimeString=createstring(ImageHeader, 'EXPTIME', '%5.3f')
TelEpochString=createstring(ImageHeader, 'EQUINOX', '%6.2f', '2000.0')
TargetNameString=createstring(ImageHeader, 'OBJECT', '%s')
InstrueNameString=createstring(ImageHeader, 'INSTRUME', '%s')
ObsModeString=createstring(ImageHeader, 'OBSMODE', '%s')
DetModeString=createstring(ImageHeader, 'DETMODE', '%s')
InstrueNameString=createstring(ImageHeader, 'INSTRUME', '%s')
ProposalCodeString=createstring(ImageHeader, 'PROPID', '%s', default='UNKNOWN')
ObservatString=createstring(ImageHeader, 'OBSERVAT', '%s')
ProposalString=createstring(ImageHeader, 'PROPOSAL', '%s')
#get the ProposalCode_Id
if not ProposalCodeString.strip():
ProposalCodeString='NONE'
ProposalCodeId=getpropcodeid(db, ProposalCodeString)
#set the pipeline strings that are a little more difficult to set
try:
UTStartString=ImageHeader['DATE-OBS']+' '+ImageHeader['TIME-OBS']
except:
UTStartString='1000-01-01 00:00:00'
if not UTStartString.strip():
UTStartString='1000-01-01 00:00:00'
try:
TelRA=15.0*sex2dec(ImageHeader['TELRA'])
TelDec=sex2dec(ImageHeader['TELDEC'])
TelRAString='%10.7f' % TelRA
TelDecString='%10.7f' % TelDec
except Exception as e:
UTStartString='1000-01-01 00:00:00'
TelRAString='0.00000'
TelDecString='100.0000'
try:
PipelineStartString=datatimeobs2DateTime(ImageHeader['SAL-TLM'])
except Exception as inst:
PipelineStartString='1000-01-01 00:00:00'
#set the number of exposures
nexposures=1
try:
if ImageHeader['DETMODE'].count('SLOT'):
nexposures=ImageHeader['NEXTEND']
#this is hardwired but should be changed to use NAMPS
if ImageHeader['INSTRUME'] is 'RSS':
nexposures=nexposures/6
else:
nexposures=nexposures/4
except:
pass
if not PipelineFileNameString:
PipelineFileNameString=FileNameString
try:
name=os.path.basename(FileNameString).split('.')[0]
date = '%s-%s-%s' % (name[1:5], name[5:7], name[7:9])
except Exception as e:
message='Could not determine the date for %s because %s' \
% (FileNameString, e)
raise SALTMySQLError(message)
#get the obsstats
#ObsStatsId=getobsstatsid(db, date)
try:
filesize=os.path.getsize(PipelineFileNameString)/1024.0
except OSError:
filesize=os.path.getsize(FileNameString)/1024.0
except:
filesize=0
#get the block id
try:
BlockString=ImageHeader['BLOCKID'].strip()
BlockString=saltio.checkfornone(BlockString)
try:
if int(BlockString)==0: BlockString=None
except:
pass
except KeyError:
BlockString=''
#get the block id
try:
BlockVisitString=ImageHeader['BVISITID'].strip()
BlockVisitString=saltio.checkfornone(BlockVisitString)
try:
if int(BlockVisitString)==0: BlockVisitString=None
except:
pass
except KeyError:
BlockVisitString=''
#create the insertion command for the data
try:
insert_command='StepStats_Id=1,'
insert_command += "UTStart='"+UTStartString+"',"
insert_command += "ProposalCode_Id=%i," % ProposalCodeId
insert_command += "Target_Name='"+TargetNameString+"',"
insert_command += "ExposureTime='"+ExposureTimeString+"',"
insert_command += "TelRA='"+TelRAString+"',"
insert_command += "TelDec='"+TelDecString+"',"
insert_command += "TelEpoch='"+TelEpochString+"',"
insert_command += "FileName='"+FileNameString+"',"
insert_command += "PipelineDate='"+PipelineStartString+"',"
insert_command += "PipelineFileName='"+PipelineFileNameString+"',"
insert_command += "INSTRUME='"+InstrueNameString+"',"
insert_command += "OBSMODE='"+ObsModeString+"',"
insert_command += "DETMODE='"+DetModeString+"',"
insert_command += "NExposures='%i',"%nexposures
insert_command += "FileSize='%i'"%filesize
if BlockString: insert_command += ",Block_Id='%s'"%BlockString
if BlockVisitString: insert_command += ",BlockVisit_Id='%s'"%BlockVisitString
except Exception as e:
message='Could not create insert command because %s' % e
raise SALTMySQLError(message)
return insert_command
