def test_change_model():
geo_model = create_example_model('Horizontal_layers')
module = GemPyModule(geo_model=geo_model,
extent=extent,
box=[1000, 800],
load_examples=False)
sb_params = module.update(pytest.sb_params)
sb_params['fig'].show()
geo_model2 = create_example_model('Fault')
module.change_model(geo_model2)
sb_params = module.update(pytest.sb_params)
sb_params['fig'].show()
def test_widgets_with_arucos():
from sandbox.sensor import Sensor
from sandbox.markers import MarkerDetection
from sandbox import _calibration_dir, _test_data
sensor = Sensor(calibsensor=_calibration_dir + 'sensorcalib.json',
name='kinect_v2')
aruco = MarkerDetection(sensor=sensor)
color = np.load(_test_data['test'] + 'frame1.npz')['arr_1']
geo_model = create_example_model(name='Anticline')
module = GemPyModule(geo_model=geo_model,
extent=sensor.extent,
box=[1000, 800],
load_examples=True,
name_example=['Horizontal_layers'])
module.setup(sensor.get_frame())
pytest.sb_params['marker'] = aruco.update(frame=color)
sb_params = module.update(pytest.sb_params)
sb_params['fig'].show()
module.set_section_dict((10, 10), (500, 500), "Section1")
module.set_section_dict((100, 100), (500, 10), "Section2")
module.set_borehole_dict((500, 500), "borehole3")
module.set_borehole_dict((900, 500), "borehole4")
module._get_polygon_data()
aruco.plot_aruco(sb_params['ax'], sb_params['marker'])
sb_params['fig'].show()
widgets = module.show_widgets()
widgets.show()
def test_update():
geo_model = create_example_model('Horizontal_layers')
module = GemPyModule(geo_model=geo_model,
extent=extent,
box=[1000, 800],
load_examples=False)
module.show_boundary = True
module.show_lith = False
module.show_hillshades = True
module.show_contour = True
module.show_fill_contour = True
sb_params = module.update(pytest.sb_params)
sb_params['fig'].show()
def test_plot_cross_sections():
geo_model = create_example_model('Horizontal_layers')
module = GemPyModule(geo_model=geo_model,
extent=extent,
box=[1000, 800],
load_examples=False)
sb_params = module.update(pytest.sb_params)
sb_params['fig'].show()
module.set_section_dict((10, 10), (500, 500), "Section1")
module.set_section_dict((100, 100), (500, 10), "Section2")
module.show_actual_model()
module.show_section_traces()
module.show_cross_section("Section1")
module.show_cross_section("Section2")
module.show_geological_map()
def test_update_arucos():
from sandbox.sensor import Sensor
from sandbox.markers import MarkerDetection
from sandbox import _calibration_dir, _test_data
sensor = Sensor(calibsensor=_calibration_dir + 'sensorcalib.json',
name='kinect_v2',
invert=False)
aruco = MarkerDetection(sensor=sensor)
color = np.load(_test_data['test'] + 'frame1.npz')['arr_1']
module = GemPyModule(geo_model=None,
extent=sensor.extent,
box=[1000, 800],
load_examples=True,
name_example=['Horizontal_layers'])
sb_params = pytest.sb_params
sb_params['frame'] = sensor.get_frame()
module.setup(sb_params['frame'])
sb_params['marker'] = aruco.update(frame=color)
sb_params = module.update(sb_params)
sb_params['fig'].show()
aruco.plot_aruco(sb_params['ax'], sb_params['marker'])
fig.show()
def test_complex_model():
geo_model = gp.create_model('Geological_Model1')
geo_model = gp.init_data(geo_model,
extent=[0, 4000, 0, 2775, 200, 1500],
resolution=[100, 10, 100])
gp.set_interpolator(geo_model, theano_optimizer='fast_run', verbose=[])
geo_model.add_features(['Fault2', 'Cycle2', 'Fault1', 'Cycle1'])
geo_model.delete_features('Default series')
geo_model.add_surfaces(['F2', 'H', 'G', 'F1', 'D', 'C', 'B', 'A'])
gp.map_stack_to_surfaces(geo_model, {
'Fault1': 'F1',
'Fault2': 'F2',
'Cycle2': ['G', 'H']
})
geo_model.set_is_fault(['Fault1', 'Fault2'])
###Cycle 1
# surface B - before F1
geo_model.add_surface_points(X=584, Y=285, Z=500, surface='B')
geo_model.add_surface_points(X=494, Y=696, Z=500, surface='B')
geo_model.add_surface_points(X=197, Y=1898, Z=500, surface='B')
geo_model.add_surface_points(X=473, Y=2180, Z=400, surface='B')
geo_model.add_surface_points(X=435, Y=2453, Z=400, surface='B')
# surface C - before F1
geo_model.add_surface_points(X=946, Y=188, Z=600, surface='C')
geo_model.add_surface_points(X=853, Y=661, Z=600, surface='C')
geo_model.add_surface_points(X=570, Y=1845, Z=600, surface='C')
geo_model.add_surface_points(X=832, Y=2132, Z=500, surface='C')
geo_model.add_surface_points(X=767, Y=2495, Z=500, surface='C')
# Surface D - Before F1
geo_model.add_surface_points(X=967, Y=1638, Z=800, surface='D')
geo_model.add_surface_points(X=1095, Y=996, Z=800, surface='D')
# Adding orientation to Cycle 1
geo_model.add_orientations(X=832,
Y=2132,
Z=500,
surface='C',
orientation=[76, 17.88, 1])
# surface B - After F1
geo_model.add_surface_points(X=1447, Y=2554, Z=500, surface='B')
geo_model.add_surface_points(X=1511, Y=2200, Z=500, surface='B')
geo_model.add_surface_points(X=1549, Y=629, Z=600, surface='B')
geo_model.add_surface_points(X=1630, Y=287, Z=600, surface='B')
# surface C - After F1
geo_model.add_surface_points(X=1891, Y=2063, Z=600, surface='C')
geo_model.add_surface_points(X=1605, Y=1846, Z=700, surface='C')
geo_model.add_surface_points(X=1306, Y=1641, Z=800, surface='C')
geo_model.add_surface_points(X=1476, Y=979, Z=800, surface='C')
geo_model.add_surface_points(X=1839, Y=962, Z=700, surface='C')
geo_model.add_surface_points(X=2185, Y=893, Z=600, surface='C')
geo_model.add_surface_points(X=2245, Y=547, Z=600, surface='C')
# Surface D - After F1
geo_model.add_surface_points(X=2809, Y=2567, Z=600, surface='D')
geo_model.add_surface_points(X=2843, Y=2448, Z=600, surface='D')
geo_model.add_surface_points(X=2873, Y=876, Z=700, surface='D')
# Surface D - After F2
geo_model.add_surface_points(X=3056, Y=2439, Z=650, surface='D')
geo_model.add_surface_points(X=3151, Y=1292, Z=700, surface='D')
### Fault 1
# Surface F1
geo_model.add_surface_points(X=1203, Y=138, Z=600, surface='F1')
geo_model.add_surface_points(X=1250, Y=1653, Z=800, surface='F1')
# orientation to Fault 1
geo_model.add_orientations(X=1280,
Y=2525,
Z=500,
surface='F1',
orientation=[272, 90, 1])
### Cycle 2
# Surface G - Before F2
geo_model.add_surface_points(X=1012, Y=1493, Z=900, surface='G')
geo_model.add_surface_points(X=1002, Y=1224, Z=900, surface='G')
geo_model.add_surface_points(X=1579, Y=1376, Z=850, surface='G')
geo_model.add_surface_points(X=2489, Y=336, Z=750, surface='G')
geo_model.add_surface_points(X=2814, Y=1848, Z=750, surface='G')
# Surface H - Before F2
geo_model.add_surface_points(X=2567, Y=129, Z=850, surface='H')
geo_model.add_surface_points(X=3012, Y=726, Z=800, surface='H')
# Orientation to cycle 2
geo_model.add_orientations(X=1996,
Y=47,
Z=800,
surface='G',
orientation=[92, 5.54, 1])
# Surface G - After F2
geo_model.add_surface_points(X=3031, Y=2725, Z=800, surface='G')
geo_model.add_surface_points(X=3281, Y=2314, Z=750, surface='G')
geo_model.add_surface_points(X=3311, Y=1357, Z=750, surface='G')
geo_model.add_surface_points(X=3336, Y=898, Z=750, surface='G')
# Surface H - After F2
geo_model.add_surface_points(X=3218, Y=1818, Z=890, surface='H')
geo_model.add_surface_points(X=3934, Y=1207, Z=810, surface='H')
geo_model.add_surface_points(X=3336, Y=704, Z=850, surface='H')
### Fault 2
geo_model.add_surface_points(X=3232, Y=178, Z=1000, surface='F2')
geo_model.add_surface_points(X=2912, Y=2653, Z=700, surface='F2')
# Add orientation to Fault 2
geo_model.add_orientations(X=3132,
Y=951,
Z=700,
surface='F2',
orientation=[85, 90, 1])
gp.compute_model(geo_model, sort_surfaces=False)
module = GemPyModule(geo_model=geo_model,
extent=extent,
box=[1000, 800],
load_examples=False)
module.show_boundary = True
module.show_lith = True
module.show_hillshades = True
module.show_contour = True
module.show_fill_contour = False
sb_params = module.update(pytest.sb_params)
sb_params['fig'].show()
