def modify_router_interface_attribute(self, params):
"""
modify_router_interface_attribute: 修改路由器接口的配置
官网API参考: https://help.aliyun.com/document_detail/36036.html
"""
try:
request = ModifyRouterInterfaceAttributeRequest.ModifyRouterInterfaceAttributeRequest()
# 路由器接口的ID
request.set_RouterInterfaceId(params['router_interface_id'])
# 对端路由器接口ID
request.set_OppositeInterfaceId(params['opposite_interface_id'])
# 对端的路由器的ID
request.set_OppositeRouterId(params['opposite_router_id'])
# 对端的路由器的类型
request.set_OppositeRouterType(params['opposite_router_type'])
response = self.client.do_action_with_exception(request)
response_json = json.loads(response)
# 判断Router Interface状态是否可用
if CheckStatus.check_status(TIME_DEFAULT_OUT, DEFAULT_TIME,
self.describe_ri_status,
'Idle', params['router_interface_id']):
return response_json
except ServerException as e:
ExceptionHandler.server_exception(e)
except ClientException as e:
ExceptionHandler.client_exception(e)
def create_virtual_border_router(self, params):
"""
create_virtual_border_router: 新建边界路由器
官网API参考: https://help.aliyun.com/document_detail/36023.html
"""
try:
request = CreateVirtualBorderRouterRequest.CreateVirtualBorderRouterRequest()
# 物理专线的ID
request.set_PhysicalConnectionId(params['physical_connection_id'])
# VBR的阿里云侧互联IP
request.set_LocalGatewayIp(params['local_gateway_ip'])
# VBR专线侧接口对端的IP地址
request.set_PeerGatewayIp(params['peer_gateway_ip'])
# VBR的阿里云侧和客户侧互联IP的子网掩码
request.set_PeeringSubnetMask(params['peering_subnet_mask'])
# VBR的VLAN ID
request.set_VlanId(params['vlan_id'])
response = self.client.do_action_with_exception(request)
response_json = json.loads(response)
# 判断Vbr状态是否可用
if CheckStatus.check_status(TIME_DEFAULT_OUT, DEFAULT_TIME,
self.describe_vbr_status,
'active', response_json['VbrId']):
return response_json
except ServerException as e:
ExceptionHandler.server_exception(e)
except ClientException as e:
ExceptionHandler.client_exception(e)
def create_route_entry(self, params):
"""
create_route_entry: 创建route_entry路由条目
官网API参考链接: https://help.aliyun.com/document_detail/36012.html
"""
try:
request = CreateRouteEntryRequest.CreateRouteEntryRequest()
# 路由表ID
request.set_RouteTableId(params['route_table_id'])
# 自定义路由条目的目标网段
request.set_DestinationCidrBlock(params['destination_cidr_block'])
# 下一跳的类型
request.set_NextHopType(params['nexthop_type'])
# 下一跳实例的ID
request.set_NextHopId(params['nexthop_id'])
response = self.client.do_action_with_exception(request)
response_json = json.loads(response)
# 判断router entry状态是否可用
if CheckStatus.check_status(TIME_DEFAULT_OUT, DEFAULT_TIME,
self.describe_route_entry_status,
AVAILABLE, params['route_table_id']):
return response_json
except ServerException as e:
ExceptionHandler.server_exception(e)
except ClientException as e:
ExceptionHandler.client_exception(e)
def unassociate_eip_address(self, params):
"""
unassociate_eip_address: 将EIP从绑定的云资源上解绑。
官网API参考: https://help.aliyun.com/document_detail/36021.html
"""
try:
request = UnassociateEipAddressRequest.UnassociateEipAddressRequest(
)
# EIP的ID
request.set_AllocationId(params['allocation_id'])
# 要解绑的资源类型
request.set_InstanceType(params['instance_type'])
# 要解绑的云产品的实例ID
request.set_InstanceId(params['instance_id'])
response = self.client.do_action_with_exception(request)
response_json = json.loads(response)
if CheckStatus.check_status(TIME_DEFAULT_OUT, DEFAULT_TIME,
self.describe_eip_status, AVAILABLE,
params['allocation_id']):
return response_json
return response_json
except ServerException as e:
ExceptionHandler.server_exception(e)
except ClientException as e:
ExceptionHandler.client_exception(e)
def create_router_interface(self, params):
"""
create_router_interface: 创建路由器接口
官网API参考: https://help.aliyun.com/document_detail/36032.html
"""
try:
request = CreateRouterInterfaceRequest.CreateRouterInterfaceRequest()
# 路由器接口的规格
request.set_Spec(params['spec'])
# 路由器接口的角色
request.set_Role(params['role'])
# 路由器接口关联的路由器ID
request.set_RouterId(params['router_id'])
# 路由器接口关联的路由器类型
request.set_RouterType(params['router_type'])
# 连接接收端所在的地域ID
request.set_OppositeRegionId(params['opposite_region_id'])
# 对端路由器接口关联的路由器类型
request.set_OppositeRouterType(params['opposite_router_type'])
response = self.client.do_action_with_exception(request)
response_json = json.loads(response)
# 判断Router Interface状态是否可用
if CheckStatus.check_status(TIME_DEFAULT_OUT, DEFAULT_TIME,
self.describe_ri_status,
'Idle', response_json['RouterInterfaceId']):
return response_json
except ServerException as e:
ExceptionHandler.server_exception(e)
except ClientException as e:
ExceptionHandler.client_exception(e)
def create_route_table(self, params):
"""
create_route_table: 创建一个自定义路由表
官网API参考链接: https://help.aliyun.com/document_detail/87586.html
"""
try:
request = CreateRouteEntryRequest.CreateRouteEntryRequest()
request.set_action_name("CreateRouteTable")
# 自定义路由表所属的VPC ID
request.add_query_param("VpcId", params['vpc_id'])
# 路由表的名称
request.add_query_param("RouteTableName",
params['route_table_name'])
response = self.client.do_action_with_exception(request)
response_json = json.loads(response)
route_table_id = response_json['RouteTableId']
# 判断route table状态是否可用
if CheckStatus.check_status(TIME_DEFAULT_OUT, DEFAULT_TIME * 5,
self.describe_route_table_status,
route_table_id, route_table_id):
return response_json
except ServerException as e:
ExceptionHandler.server_exception(e)
except ClientException as e:
ExceptionHandler.client_exception(e)
def allocate_eip_address(self, params):
"""
allocate_eip_address: 申请弹性公网IP（EIP)
官网API参考: https://help.aliyun.com/document_detail/36016.html
"""
try:
request = AllocateEipAddressRequest.AllocateEipAddressRequest()
response = self.client.do_action_with_exception(request)
response_json = json.loads(response)
if CheckStatus.check_status(TIME_DEFAULT_OUT, DEFAULT_TIME,
self.describe_eip_status, AVAILABLE,
response_json["AllocationId"]):
return response_json
except ServerException as e:
ExceptionHandler.server_exception(e)
except ClientException as e:
ExceptionHandler.client_exception(e)
def delete_virtual_border_router(self, params):
"""
delete_virtual_border_router: 删除边界路由器
官网API参考: https://help.aliyun.com/document_detail/40542.html
"""
try:
request = DeleteVirtualBorderRouterRequest.DeleteVirtualBorderRouterRequest()
request.set_VbrId(params['vbr_id'])
response = self.client.do_action_with_exception(request)
response_json = json.loads(response)
if CheckStatus.check_status(TIME_DEFAULT_OUT, DEFAULT_TIME,
self.describe_vbr_status,
'', params['vbr_id']):
return response_json
except ServerException as e:
ExceptionHandler.server_exception(e)
except ClientException as e:
ExceptionHandler.client_exception(e)
def create_vpc(self):
"""
create_vpc：创建vpc
官网API参考链接: https://help.aliyun.com/document_detail/35737.html
"""
try:
request = CreateVpcRequest.CreateVpcRequest()
response = self.client.do_action_with_exception(request)
response_json = json.loads(response)
# 判断Vpc状态是否可用
if CheckStatus.check_status(TIME_DEFAULT_OUT, DEFAULT_TIME,
self.describe_vpc_status, AVAILABLE,
response_json['VpcId']):
return response_json
except ServerException as e:
ExceptionHandler.server_exception(e)
except ClientException as e:
ExceptionHandler.client_exception(e)
def delete_nat_gateway(self, params):
"""
delete_nat_gateway: 删除nat gateway
官网API参考: https://help.aliyun.com/document_detail/36051.html
"""
try:
request = DeleteNatGatewayRequest.DeleteNatGatewayRequest()
request.set_NatGatewayId(params['nat_gateway_id'])
response = client.do_action_with_exception(request)
response_json = json.loads(response)
# 判断Nat Gateway状态是否可用
if CheckStatus.check_status(TIME_DEFAULT_OUT, DEFAULT_TIME * 5,
self.describe_nat_gateway_status, '',
params['nat_gateway_id']):
return response_json
except ServerException as e:
ExceptionHandler.server_exception(e)
except ClientException as e:
ExceptionHandler.client_exception(e)
def connect_router_interface(self, params):
"""
connect_router_interface: 由发起端路由器接口向接收端发起连接
官网API参考: https://help.aliyun.com/document_detail/36031.html
"""
try:
request = ConnectRouterInterfaceRequest.ConnectRouterInterfaceRequest()
# 发起端路由器接口的ID
request.set_RouterInterfaceId(params['router_interface_id'])
response = self.client.do_action_with_exception(request)
response_json = json.loads(response)
if CheckStatus.check_status(TIME_DEFAULT_OUT * 5, DEFAULT_TIME * 5,
self.describe_ri_status,
'Active', params['router_interface_id']):
return response_json
except ServerException as e:
ExceptionHandler.server_exception(e)
except ClientException as e:
ExceptionHandler.client_exception(e)
def delete_snat_entry(self, params):
"""
delete_snat_entry: 删除snat entry
官网API参考: https://help.aliyun.com/document_detail/42678.html
"""
try:
request = DeleteSnatEntryRequest.DeleteSnatEntryRequest()
request.set_SnatTableId(params['snat_table_id'])
request.set_SnatEntryId(params['snat_entry_id'])
response = client.do_action_with_exception(request)
response_json = json.loads(response)
# 判断Snat Entry状态是否可用
if CheckStatus.check_status(TIME_DEFAULT_OUT, DEFAULT_TIME * 5,
self.describe_snat_status, '',
params['snat_table_id']):
return response_json
except ServerException as e:
ExceptionHandler.server_exception(e)
except ClientException as e:
ExceptionHandler.client_exception(e)
def delete_vswitch(self, params):
"""
delete_vswitch: 删除vswitch实例
官网API参考: https://help.aliyun.com/document_detail/35746.html
"""
try:
request = DeleteVSwitchRequest.DeleteVSwitchRequest()
# 要删除的交换机的ID
request.set_VSwitchId(params['vswitch_id'])
response = self.client.do_action_with_exception(request)
response_json = json.loads(response)
# 判断VSwitch是否被删除成功
if CheckStatus.check_status(TIME_DEFAULT_OUT, DEFAULT_TIME * 5,
self.describe_vswitch_status, '',
params['vswitch_id']):
return response_json
except ServerException as e:
ExceptionHandler.server_exception(e)
except ClientException as e:
ExceptionHandler.client_exception(e)
def deactivate_router_interface(self, params):
"""
deactivate_router_interface: 冻结路由器接口
官网API参考: https://help.aliyun.com/document_detail/36033.html
"""
try:
request = DeactivateRouterInterfaceRequest.DeactivateRouterInterfaceRequest()
# 路由器接口的ID
request.set_RouterInterfaceId(params['router_interface_id'])
response = self.client.do_action_with_exception(request)
response_json = json.loads(response)
# 判断Router Interface状态是否可用
if CheckStatus.check_status(TIME_DEFAULT_OUT * 5, DEFAULT_TIME * 5,
self.describe_ri_status,
'Inactive', params['router_interface_id']):
return response_json
except ServerException as e:
ExceptionHandler.server_exception(e)
except ClientException as e:
ExceptionHandler.client_exception(e)
def create_nat_gateway(self, params):
"""
create_nat_gateway: 创建nat gateway
官网API参考: https://help.aliyun.com/document_detail/36048.html
"""
try:
request = CreateNatGatewayRequest.CreateNatGatewayRequest()
request.set_VpcId(params['vpc_id'])
response = client.do_action_with_exception(request)
response_json = json.loads(response)
# 判断Nat Gateway状态是否可用
if CheckStatus.check_status(TIME_DEFAULT_OUT, DEFAULT_TIME,
self.describe_nat_gateway_status,
AVAILABLE,
response_json['NatGatewayId']):
return response_json
except ServerException as e:
ExceptionHandler.server_exception(e)
except ClientException as e:
ExceptionHandler.client_exception(e)
def create_snat_entry(self, params):
"""
describe_snat: 创建snat entry
官网API参考: https://help.aliyun.com/document_detail/42672.html
"""
try:
request = CreateSnatEntryRequest.CreateSnatEntryRequest()
request.set_SnatTableId(params['snat_table_id'])
request.set_SourceVSwitchId(params['vswitch_id'])
request.set_SnatIp(params['snat_ip'])
response = client.do_action_with_exception(request)
response_json = json.loads(response)
# 判断Snat Entry状态是否可用
if CheckStatus.check_status(TIME_DEFAULT_OUT, DEFAULT_TIME,
self.describe_snat_status, AVAILABLE,
params['snat_table_id']):
return response_json
except ServerException as e:
ExceptionHandler.server_exception(e)
except ClientException as e:
ExceptionHandler.client_exception(e)
def delete_route_table(self, params):
"""
delete_route_table: 删除自定义路由表
官网API参考链接: https://help.aliyun.com/document_detail/87601.html
"""
try:
request = DeleteRouteEntryRequest.DeleteRouteEntryRequest()
request.set_action_name("DeleteRouteTable")
# 路由表ID
request.add_query_param("RouteTableId", params['route_table_id'])
response = self.client.do_action_with_exception(request)
response_json = json.loads(response)
# 判断route table是否被删除成功
if CheckStatus.check_status(TIME_DEFAULT_OUT, DEFAULT_TIME * 5,
self.describe_route_table_status,
'', params['route_table_id']):
return response_json
except ServerException as e:
ExceptionHandler.server_exception(e)
except ClientException as e:
ExceptionHandler.client_exception(e)
def create_forward_entry(self, params):
"""
create_forward_entry: 创建forward entry
官网API参考: https://help.aliyun.com/document_detail/36058.html
"""
try:
request = CreateForwardEntryRequest.CreateForwardEntryRequest()
request.set_ForwardTableId(params['forward_table_id'])
request.set_ExternalIp(params['external_ip'])
request.set_IpProtocol(params['ip_protocol'])
request.set_ExternalPort(params['external_port'])
request.set_InternalIp(params['internal_ip'])
request.set_InternalPort(params['internal_port'])
response = client.do_action_with_exception(request)
response_json = json.loads(response)
# 判断Forward Entry状态是否可用
if CheckStatus.check_status(TIME_DEFAULT_OUT, DEFAULT_TIME,
self.describe_forward_status,
AVAILABLE, params['forward_table_id']):
return response_json
except ServerException as e:
ExceptionHandler.server_exception(e)
except ClientException as e:
ExceptionHandler.client_exception(e)
def create_vswitch(self, params):
"""
create_vswitch: 创建vpc实例
官网API参考: https://help.aliyun.com/document_detail/35745.html
"""
try:
request = CreateVSwitchRequest.CreateVSwitchRequest()
# 交换机所属区的ID，您可以通过调用DescribeZones接口获取地域ID
request.set_ZoneId(params['zone_id'])
# 交换机所属的VPC ID
request.set_VpcId(params['vpc_id'])
# 交换机的网段
request.set_CidrBlock(params['cidr_block'])
response = self.client.do_action_with_exception(request)
response_json = json.loads(response)
# 判断VSwitch状态是否可用
if CheckStatus.check_status(TIME_DEFAULT_OUT, DEFAULT_TIME,
self.describe_vswitch_status,
AVAILABLE, response_json['VSwitchId']):
return response_json
except ServerException as e:
ExceptionHandler.server_exception(e)
except ClientException as e:
ExceptionHandler.client_exception(e)
