Ejemplo n.º 1
0
def main():
    results = Results(COMMON_CONFIG.line_length)
    results.add_to_summary(0, "=")
    results.add_to_summary(2, "STATUS", "SUBTEST")
    results.add_to_summary(0, "=")

    openstack_nodes = test_utils.get_nodes()

    # node.is_odl() doesn't work in Apex
    # https://jira.opnfv.org/browse/RELENG-192
    controllers = [
        node for node in openstack_nodes
        if "running" in node.run_cmd("sudo systemctl status opendaylight")
    ]
    computes = [node for node in openstack_nodes if node.is_compute()]

    msg = ("Verify that OpenDaylight can start/communicate with zrpcd/Quagga")
    results.record_action(msg)
    results.add_to_summary(0, "-")
    if not controllers:
        msg = ("Controller (ODL) list is empty. Skipping rest of tests.")
        logger.info(msg)
        results.add_failure(msg)
        return results.compile_summary()
    else:
        msg = ("Controller (ODL) list is ready")
        logger.info(msg)
        results.add_success(msg)

    controller = controllers[0]  # We don't handle HA well
    get_ext_ip_cmd = "sudo ip a | grep br-ex | grep inet | awk '{print $2}'"
    ext_net_cidr = controller.run_cmd(get_ext_ip_cmd).strip().split('\n')
    ext_net_mask = ext_net_cidr[0].split('/')[1]
    controller_ext_ip = ext_net_cidr[0].split('/')[0]

    logger.info("Starting bgp speaker of controller at IP %s " %
                controller_ext_ip)
    logger.info("Checking if zrpcd is " "running on the controller node")

    output_zrpcd = controller.run_cmd("ps --no-headers -C " "zrpcd -o state")
    states = output_zrpcd.split()
    running = any([s != 'Z' for s in states])

    msg = ("zrpcd is running")

    if not running:
        logger.info("zrpcd is not running on the controller node")
        results.add_failure(msg)
    else:
        logger.info("zrpcd is running on the controller node")
        results.add_success(msg)

    results.add_to_summary(0, "-")

    # Ensure that ZRPCD ip & port are well configured within ODL
    add_client_conn_to_bgp = "bgp-connect -p 7644 -h 127.0.0.1 add"
    test_utils.run_odl_cmd(controller, add_client_conn_to_bgp)

    # Start bgp daemon
    start_quagga = "odl:configure-bgp -op start-bgp-server " \
                   "--as-num 100 --router-id {0}".format(controller_ext_ip)
    test_utils.run_odl_cmd(controller, start_quagga)

    logger.info("Checking if bgpd is running" " on the controller node")

    # Check if there is a non-zombie bgpd process
    output_bgpd = controller.run_cmd("ps --no-headers -C " "bgpd -o state")
    states = output_bgpd.split()
    running = any([s != 'Z' for s in states])

    msg = ("bgpd is running")
    if not running:
        logger.info("bgpd is not running on the controller node")
        results.add_failure(msg)
    else:
        logger.info("bgpd is running on the controller node")
        results.add_success(msg)

    results.add_to_summary(0, "-")

    # We should be able to restart the speaker
    # but the test is disabled because of buggy upstream
    # https://github.com/6WIND/zrpcd/issues/15
    # stop_quagga = 'odl:configure-bgp -op stop-bgp-server'
    # test_utils.run_odl_cmd(controller, stop_quagga)

    # logger.info("Checking if bgpd is still running"
    #             " on the controller node")

    # output_bgpd = controller.run_cmd("ps --no-headers -C " \
    #                                  "bgpd -o state")
    # states = output_bgpd.split()
    # running = any([s != 'Z' for s in states])

    # msg = ("bgpd is stopped")
    # if not running:
    #     logger.info("bgpd is not running on the controller node")
    #     results.add_success(msg)
    # else:
    #     logger.info("bgpd is still running on the controller node")
    #     results.add_failure(msg)

    # Taken from the sfc tests
    if not os.path.isfile(COMMON_CONFIG.ubuntu_image_path):
        logger.info("Downloading image")
        os_utils.download_url(
            "http://artifacts.opnfv.org/sdnvpn/"
            "ubuntu-16.04-server-cloudimg-amd64-disk1.img",
            "/home/opnfv/functest/data/")
    else:
        logger.info("Using old image")

    glance_client = os_utils.get_glance_client()
    nova_client = os_utils.get_nova_client()
    neutron_client = os_utils.get_neutron_client()

    (floatingip_ids, instance_ids, router_ids, network_ids, image_ids,
     subnet_ids, interfaces, bgpvpn_ids, flavor_ids) = ([] for i in range(9))

    try:
        _, flavor_id = test_utils.create_custom_flavor()
        flavor_ids.append(flavor_id)

        sg_id = os_utils.create_security_group_full(
            neutron_client, TESTCASE_CONFIG.secgroup_name,
            TESTCASE_CONFIG.secgroup_descr)
        test_utils.open_icmp(neutron_client, sg_id)
        test_utils.open_http_port(neutron_client, sg_id)

        test_utils.open_bgp_port(neutron_client, sg_id)
        net_id, subnet_1_id, router_1_id = test_utils.create_network(
            neutron_client, TESTCASE_CONFIG.net_1_name,
            TESTCASE_CONFIG.subnet_1_name, TESTCASE_CONFIG.subnet_1_cidr,
            TESTCASE_CONFIG.router_1_name)

        quagga_net_id, subnet_quagga_id, \
            router_quagga_id = test_utils.create_network(
                neutron_client,
                TESTCASE_CONFIG.quagga_net_name,
                TESTCASE_CONFIG.quagga_subnet_name,
                TESTCASE_CONFIG.quagga_subnet_cidr,
                TESTCASE_CONFIG.quagga_router_name)

        interfaces.append(tuple((router_1_id, subnet_1_id)))
        interfaces.append(tuple((router_quagga_id, subnet_quagga_id)))
        network_ids.extend([net_id, quagga_net_id])
        router_ids.extend([router_1_id, router_quagga_id])
        subnet_ids.extend([subnet_1_id, subnet_quagga_id])

        installer_type = str(os.environ['INSTALLER_TYPE'].lower())
        if installer_type == "fuel":
            disk = 'raw'
        elif installer_type == "apex":
            disk = 'qcow2'
        else:
            logger.error("Incompatible installer type")

        ubuntu_image_id = os_utils.create_glance_image(
            glance_client,
            COMMON_CONFIG.ubuntu_image_name,
            COMMON_CONFIG.ubuntu_image_path,
            disk,
            container="bare",
            public="public")

        image_ids.append(ubuntu_image_id)

        # NOTE(rski) The order of this seems a bit weird but
        # there is a reason for this, namely
        # https://jira.opnfv.org/projects/SDNVPN/issues/SDNVPN-99
        # so we create the quagga instance using cloud-init
        # and immediately give it a floating IP.
        # The cloud-init script should contain a small sleep for
        # this to work.
        # We also create the FIP first because it is used in the
        # cloud-init script.
        fip = os_utils.create_floating_ip(neutron_client)
        # fake_fip is needed to bypass NAT
        # see below for the reason why.
        fake_fip = os_utils.create_floating_ip(neutron_client)

        floatingip_ids.extend([fip['fip_id'], fake_fip['fip_id']])
        # pin quagga to some compute
        compute_node = nova_client.hypervisors.list()[0]
        quagga_compute_node = "nova:" + compute_node.hypervisor_hostname
        # Map the hypervisor used above to a compute handle
        # returned by releng's manager
        for comp in computes:
            if compute_node.host_ip in comp.run_cmd("sudo ip a"):
                compute = comp
                break
        quagga_bootstrap_script = quagga.gen_quagga_setup_script(
            controller_ext_ip, fake_fip['fip_addr'], ext_net_mask)

        quagga_vm = test_utils.create_instance(
            nova_client,
            TESTCASE_CONFIG.quagga_instance_name,
            ubuntu_image_id,
            quagga_net_id,
            sg_id,
            fixed_ip=TESTCASE_CONFIG.quagga_instance_ip,
            flavor=COMMON_CONFIG.custom_flavor_name,
            userdata=quagga_bootstrap_script,
            compute_node=quagga_compute_node)

        instance_ids.append(quagga_vm)

        fip_added = os_utils.add_floating_ip(nova_client, quagga_vm.id,
                                             fip['fip_addr'])

        msg = ("Assign a Floating IP to %s " %
               TESTCASE_CONFIG.quagga_instance_name)
        if fip_added:
            results.add_success(msg)
        else:
            results.add_failure(msg)
        test_utils.attach_instance_to_ext_br(quagga_vm, compute)

        try:
            testcase = "Bootstrap quagga inside an OpenStack instance"
            cloud_init_success = test_utils.wait_for_cloud_init(quagga_vm)
            if cloud_init_success:
                results.add_success(testcase)
            else:
                results.add_failure(testcase)
            results.add_to_summary(0, "=")

            results.add_to_summary(0, '-')
            results.add_to_summary(1, "Peer Quagga with OpenDaylight")
            results.add_to_summary(0, '-')

            neighbor = quagga.odl_add_neighbor(fake_fip['fip_addr'],
                                               controller_ext_ip, controller)
            peer = quagga.check_for_peering(controller)

        finally:
            test_utils.detach_instance_from_ext_br(quagga_vm, compute)

        if neighbor and peer:
            results.add_success("Peering with quagga")
        else:
            results.add_failure("Peering with quagga")

    except Exception as e:
        logger.error("exception occurred while executing testcase_3: %s", e)
        raise
    finally:
        test_utils.cleanup_nova(nova_client, instance_ids, flavor_ids)
        test_utils.cleanup_glance(glance_client, image_ids)
        test_utils.cleanup_neutron(neutron_client, floatingip_ids, bgpvpn_ids,
                                   interfaces, subnet_ids, router_ids,
                                   network_ids)

    return results.compile_summary()
Ejemplo n.º 2
0
def main():
    results = Results(COMMON_CONFIG.line_length)

    results.add_to_summary(0, "=")
    results.add_to_summary(2, "STATUS", "SUBTEST")
    results.add_to_summary(0, "=")

    nova_client = os_utils.get_nova_client()
    neutron_client = os_utils.get_neutron_client()
    glance_client = os_utils.get_glance_client()

    (floatingip_ids, instance_ids, router_ids, network_ids, image_ids,
     subnet_ids, interfaces, bgpvpn_ids) = ([] for i in range(8))
    image_id = os_utils.create_glance_image(glance_client,
                                            TESTCASE_CONFIG.image_name,
                                            COMMON_CONFIG.image_path,
                                            disk=COMMON_CONFIG.image_format,
                                            container="bare",
                                            public='public')
    image_ids.append(image_id)

    network_1_id = test_utils.create_net(neutron_client,
                                         TESTCASE_CONFIG.net_1_name)
    subnet_1_id = test_utils.create_subnet(neutron_client,
                                           TESTCASE_CONFIG.subnet_1_name,
                                           TESTCASE_CONFIG.subnet_1_cidr,
                                           network_1_id)

    network_ids.append(network_1_id)
    subnet_ids.append(subnet_1_id)

    sg_id = os_utils.create_security_group_full(neutron_client,
                                                TESTCASE_CONFIG.secgroup_name,
                                                TESTCASE_CONFIG.secgroup_descr)

    compute_nodes = test_utils.assert_and_get_compute_nodes(nova_client)
    av_zone_1 = "nova:" + compute_nodes[0]
    av_zone_2 = "nova:" + compute_nodes[1]

    # boot INSTANCES
    vm_2 = test_utils.create_instance(
        nova_client,
        TESTCASE_CONFIG.instance_2_name,
        image_id,
        network_1_id,
        sg_id,
        secgroup_name=TESTCASE_CONFIG.secgroup_name,
        compute_node=av_zone_1)
    vm2_ip = test_utils.get_instance_ip(vm_2)

    u1 = test_utils.generate_ping_userdata([vm2_ip])
    vm_1 = test_utils.create_instance(
        nova_client,
        TESTCASE_CONFIG.instance_1_name,
        image_id,
        network_1_id,
        sg_id,
        secgroup_name=TESTCASE_CONFIG.secgroup_name,
        compute_node=av_zone_1,
        userdata=u1)
    vm1_ip = test_utils.get_instance_ip(vm_1)

    u3 = test_utils.generate_ping_userdata([vm1_ip, vm2_ip])
    vm_3 = test_utils.create_instance(
        nova_client,
        TESTCASE_CONFIG.instance_3_name,
        image_id,
        network_1_id,
        sg_id,
        secgroup_name=TESTCASE_CONFIG.secgroup_name,
        compute_node=av_zone_2,
        userdata=u3)
    vm3_ip = test_utils.get_instance_ip(vm_3)
    # We do not put vm_2 id in instance_ids table because we will
    # delete the current instance during the testing process
    instance_ids.extend([vm_1.id, vm_3.id])

    # Wait for VMs to get ips.
    instances_up = test_utils.wait_for_instances_up(vm_2)
    instances_dhcp_up = test_utils.wait_for_instances_get_dhcp(vm_1, vm_3)

    if (not instances_up or not instances_dhcp_up):
        logger.error("One or more instances are down")
        # TODO: Handle this appropriately
    # Create monitor threads to monitor traffic between vm_1, vm_2 and vm_3
    m = Manager()
    monitor_input1 = m.dict()
    monitor_output1 = m.dict()
    monitor_input1["stop_thread"] = False
    monitor_output1["error_msg"] = ""
    monitor_thread1 = Process(target=monitor,
                              args=(
                                  monitor_input1,
                                  monitor_output1,
                                  vm_1,
                              ))
    monitor_input2 = m.dict()
    monitor_output2 = m.dict()
    monitor_input2["stop_thread"] = False
    monitor_output2["error_msg"] = ""
    monitor_thread2 = Process(target=monitor,
                              args=(
                                  monitor_input2,
                                  monitor_output2,
                                  vm_2,
                              ))
    monitor_input3 = m.dict()
    monitor_output3 = m.dict()
    monitor_input3["stop_thread"] = False
    monitor_output3["error_msg"] = ""
    monitor_thread3 = Process(target=monitor,
                              args=(
                                  monitor_input3,
                                  monitor_output3,
                                  vm_3,
                              ))
    # Lists of all monitor threads and their inputs and outputs.
    threads = [monitor_thread1, monitor_thread2, monitor_thread3]
    thread_inputs = [monitor_input1, monitor_input2, monitor_input3]
    thread_outputs = [monitor_output1, monitor_output2, monitor_output3]
    try:
        logger.info("Starting all monitor threads")
        # Start all monitor threads
        for thread in threads:
            thread.start()
        logger.info("Wait before subtest")
        test_utils.wait_before_subtest()
        monitor_err_msg = ""
        for thread_output in thread_outputs:
            if thread_output["error_msg"] != "":
                monitor_err_msg += " ,{}".format(thread_output["error_msg"])
                thread_output["error_msg"] = ""
        results.record_action("Check ping status of vm_1, vm_2, and vm_3")
        results.add_to_summary(0, "-")
        if len(monitor_err_msg) == 0:
            results.add_success("Ping succeeds")
        else:
            results.add_failure(monitor_err_msg)
        # Stop monitor thread 2 and delete instance vm_2
        thread_inputs[1]["stop_thread"] = True
        if not os_utils.delete_instance(nova_client, vm_2.id):
            logger.error("Fail to delete vm_2 instance during "
                         "testing process")
            raise Exception("Fail to delete instance vm_2.")
        for thread_input in thread_inputs:
            thread_input["stop_thread"] = True
        for thread in threads:
            thread.join()
        threads = []
        thread_inputs = []
        thread_outputs = []
        # Create a new vm (vm_4) on compute 1 node
        u4 = test_utils.generate_ping_userdata([vm1_ip, vm3_ip])
        vm_4 = test_utils.create_instance(
            nova_client,
            TESTCASE_CONFIG.instance_4_name,
            image_id,
            network_1_id,
            sg_id,
            secgroup_name=TESTCASE_CONFIG.secgroup_name,
            compute_node=av_zone_1,
            userdata=u4)
        instance_ids.append(vm_4.id)

        # Wait for VMs to get ips.
        instances_dhcp_up = test_utils.wait_for_instances_get_dhcp(vm_4)
        if not instances_dhcp_up:
            logger.error("Instance vm_4 failed to start.")
            # TODO: Handle this appropriately
        # Create and start a new monitor thread for vm_4
        monitor_input4 = m.dict()
        monitor_output4 = m.dict()
        monitor_input4["stop_thread"] = False
        monitor_output4["error_msg"] = ""
        monitor_thread4 = Process(target=monitor,
                                  args=(
                                      monitor_input4,
                                      monitor_output4,
                                      vm_4,
                                  ))
        threads.append(monitor_thread4)
        thread_inputs.append(monitor_input4)
        thread_outputs.append(monitor_output4)
        logger.info("Starting monitor thread of vm_4")
        threads[0].start()
        test_utils.wait_before_subtest()
        monitor_err_msg = ""
        for thread_output in thread_outputs:
            if thread_output["error_msg"] != "":
                monitor_err_msg += " ,{}".format(thread_output["error_msg"])
                thread_output["error_msg"] = ""
        results.record_action("Check ping status of vm_1, vm_3 and vm_4. "
                              "Instance vm_2 is deleted")
        results.add_to_summary(0, "-")
        if len(monitor_err_msg) == 0:
            results.add_success("Ping succeeds")
        else:
            results.add_failure(monitor_err_msg)

    except Exception as e:
        logger.error("exception occurred while executing testcase_10: %s", e)
        raise
    finally:
        # Give a stop signal to all threads
        logger.info("Sending stop signal to monitor thread")
        for thread_input in thread_inputs:
            thread_input["stop_thread"] = True
        # Wait for all threads to stop and return to the main process
        for thread in threads:
            thread.join()

        test_utils.cleanup_nova(nova_client, instance_ids)
        test_utils.cleanup_glance(glance_client, image_ids)
        test_utils.cleanup_neutron(neutron_client, floatingip_ids, bgpvpn_ids,
                                   interfaces, subnet_ids, router_ids,
                                   network_ids)

    return results.compile_summary()
Ejemplo n.º 3
0
def main():
    results = Results(COMMON_CONFIG.line_length)

    results.add_to_summary(0, "=")
    results.add_to_summary(2, "STATUS", "SUBTEST")
    results.add_to_summary(0, "=")

    nova_client = os_utils.get_nova_client()
    neutron_client = os_utils.get_neutron_client()
    glance_client = os_utils.get_glance_client()
    openstack_nodes = test_utils.get_nodes()

    (floatingip_ids, instance_ids, router_ids, network_ids, image_ids,
     subnet_ids, interfaces, bgpvpn_ids) = ([] for i in range(8))

    try:
        image_id = os_utils.create_glance_image(
            glance_client, TESTCASE_CONFIG.image_name,
            COMMON_CONFIG.image_path, disk=COMMON_CONFIG.image_format,
            container="bare", public='public')
        image_ids.append(image_id)

        network_1_id = test_utils.create_net(neutron_client,
                                             TESTCASE_CONFIG.net_1_name)
        subnet_1_id = test_utils.create_subnet(neutron_client,
                                               TESTCASE_CONFIG.subnet_1_name,
                                               TESTCASE_CONFIG.subnet_1_cidr,
                                               network_1_id)

        network_ids.append(network_1_id)
        subnet_ids.append(subnet_1_id)

        sg_id = os_utils.create_security_group_full(
            neutron_client, TESTCASE_CONFIG.secgroup_name,
            TESTCASE_CONFIG.secgroup_descr)

        # Check required number of compute nodes
        compute_hostname = (
            nova_client.hypervisors.list()[0].hypervisor_hostname)
        compute_nodes = [node for node in openstack_nodes
                         if node.is_compute()]

        av_zone_1 = "nova:" + compute_hostname
        # List of OVS bridges to get groups
        ovs_br = "br-int"
        # Get a list of flows and groups, before start topology
        initial_ovs_flows = len(test_utils.get_ovs_flows(compute_nodes,
                                                         [ovs_br]))
        initial_ovs_groups = len(test_utils.get_ovs_groups(compute_nodes,
                                                           [ovs_br]))

        # boot INSTANCES
        vm_2 = test_utils.create_instance(
            nova_client,
            TESTCASE_CONFIG.instance_2_name,
            image_id,
            network_1_id,
            sg_id,
            secgroup_name=TESTCASE_CONFIG.secgroup_name,
            compute_node=av_zone_1)

        vm_1 = test_utils.create_instance(
            nova_client,
            TESTCASE_CONFIG.instance_1_name,
            image_id,
            network_1_id,
            sg_id,
            secgroup_name=TESTCASE_CONFIG.secgroup_name,
            compute_node=av_zone_1)
        instance_ids.extend([vm_1.id, vm_2.id])

        # Wait for VMs to get ips.
        instances_up = test_utils.wait_for_instances_up(vm_1, vm_2)

        if not instances_up:
            logger.error("One or more instances is down")

        logger.info("Wait before subtest")
        test_utils.wait_before_subtest()
        # Get added OVS flows and groups
        added_ovs_flows = len(test_utils.get_ovs_flows(compute_nodes,
                                                       [ovs_br]))
        added_ovs_groups = len(test_utils.get_ovs_groups(compute_nodes,
                                                         [ovs_br]))
        # Check if flows and groups added successfully
        results.record_action("Check if new flows and groups were added "
                              "to OVS")

        msg = "New OVS flows added"
        results.add_to_summary(0, "-")
        if added_ovs_flows - initial_ovs_flows > 0:
            results.add_success(msg)
        else:
            results.add_failure(msg)
        results.add_to_summary(0, "=")

        msg = "New OVS groups added"
        results.add_to_summary(0, "-")
        if added_ovs_groups - initial_ovs_groups > 0:
            results.add_success(msg)
        else:
            results.add_failure(msg)
        results.add_to_summary(0, "=")

        get_ext_ip_cmd = "sudo ovs-vsctl get-controller {}".format(ovs_br)
        ovs_controller_conn = (compute_nodes[0].run_cmd(get_ext_ip_cmd).
                               strip().split('\n')[0])

        for compute_node in compute_nodes:
            # Disconnect OVS from controller
            compute_node.run_cmd("sudo ovs-vsctl del-controller {}".
                                 format(ovs_br))
            test_utils.wait_before_subtest()
            # Connect again OVS to Controller
            compute_node.run_cmd("sudo ovs-vsctl set-controller {} {}".
                                 format(ovs_br, ovs_controller_conn))

        logger.info("Wait before subtest resync type 1")
        test_utils.wait_before_subtest()
        # Get OVS flows added after the reconnection
        resynced_ovs_flows = len(test_utils.get_ovs_flows(
            compute_nodes, [ovs_br]))
        # Get OVS groups added after the reconnection
        resynced_ovs_groups = len(test_utils.get_ovs_groups(
            compute_nodes, [ovs_br]))

        record_action_msg = ("Check if flows/groups are reprogrammed in OVS "
                             "after its reconnection by del/set controller.")
        record_test_result(added_ovs_flows, resynced_ovs_flows,
                           added_ovs_groups, resynced_ovs_groups,
                           record_action_msg, results)

        for compute_node in compute_nodes:
            # Disconnect OVS from controller
            compute_node.run_cmd("sudo iptables -A OUTPUT -p tcp --dport 6653"
                                 " -j DROP")
            test_utils.wait_before_subtest()
            # Connect again OVS to Controller
            compute_node.run_cmd("sudo iptables -D OUTPUT -p tcp --dport 6653"
                                 " -j DROP")

        logger.info("Wait before subtest resync type 2")
        test_utils.wait_before_subtest()
        # Get OVS flows added after the reconnection
        resynced_ovs_flows = len(test_utils.get_ovs_flows(
            compute_nodes, [ovs_br]))
        # Get OVS groups added after the reconnection
        resynced_ovs_groups = len(test_utils.get_ovs_groups(
            compute_nodes, [ovs_br]))

        record_action_msg = ("Check if flows/groups are reprogrammed in OVS "
                             "after its reconnection by firewall rule for "
                             "OF port block/unblok")
        record_test_result(added_ovs_flows, resynced_ovs_flows,
                           added_ovs_groups, resynced_ovs_groups,
                           record_action_msg, results)

    except Exception as e:
        logger.error("exception occurred while executing testcase_12: %s", e)
        raise
    finally:
        # Cleanup topology
        test_utils.cleanup_nova(nova_client, instance_ids)
        test_utils.cleanup_glance(glance_client, image_ids)
        test_utils.cleanup_neutron(neutron_client, floatingip_ids, bgpvpn_ids,
                                   interfaces, subnet_ids, router_ids,
                                   network_ids)

    return results.compile_summary()
Ejemplo n.º 4
0
def main():
    results = Results(COMMON_CONFIG.line_length)

    results.add_to_summary(0, "=")
    results.add_to_summary(2, "STATUS", "SUBTEST")
    results.add_to_summary(0, "=")

    nova_client = os_utils.get_nova_client()
    neutron_client = os_utils.get_neutron_client()
    glance_client = os_utils.get_glance_client()
    openstack_nodes = test_utils.get_nodes()

    (floatingip_ids, instance_ids, router_ids, network_ids, image_ids,
     subnet_ids, interfaces, bgpvpn_ids) = ([] for i in range(8))

    try:
        image_id = os_utils.create_glance_image(
            glance_client, TESTCASE_CONFIG.image_name,
            COMMON_CONFIG.image_path, disk=COMMON_CONFIG.image_format,
            container="bare", public='public')
        image_ids.append(image_id)

        network_1_id = test_utils.create_net(neutron_client,
                                             TESTCASE_CONFIG.net_1_name)
        subnet_1_id = test_utils.create_subnet(neutron_client,
                                               TESTCASE_CONFIG.subnet_1_name,
                                               TESTCASE_CONFIG.subnet_1_cidr,
                                               network_1_id)

        network_ids.append(network_1_id)
        subnet_ids.append(subnet_1_id)

        sg_id = os_utils.create_security_group_full(
            neutron_client, TESTCASE_CONFIG.secgroup_name,
            TESTCASE_CONFIG.secgroup_descr)

        # Check required number of compute nodes
        compute_hostname = (
            nova_client.hypervisors.list()[0].hypervisor_hostname)
        compute_nodes = [node for node in openstack_nodes
                         if node.is_compute()]

        av_zone_1 = "nova:" + compute_hostname
        # List of OVS bridges to get groups
        ovs_br = "br-int"
        # Get a list of groups, before start topology
        initial_ovs_groups = test_utils.get_ovs_groups(compute_nodes,
                                                       [ovs_br])

        # boot INSTANCES
        vm_2 = test_utils.create_instance(
            nova_client,
            TESTCASE_CONFIG.instance_2_name,
            image_id,
            network_1_id,
            sg_id,
            secgroup_name=TESTCASE_CONFIG.secgroup_name,
            compute_node=av_zone_1)

        vm_1 = test_utils.create_instance(
            nova_client,
            TESTCASE_CONFIG.instance_1_name,
            image_id,
            network_1_id,
            sg_id,
            secgroup_name=TESTCASE_CONFIG.secgroup_name,
            compute_node=av_zone_1)
        instance_ids.extend([vm_1.id, vm_2.id])

        # Wait for VMs to get ips.
        instances_up = test_utils.wait_for_instances_up(vm_1, vm_2)

        if not instances_up:
            logger.error("One or more instances is down")
            # TODO: Handle this appropriately

        logger.info("Wait before subtest")
        test_utils.wait_before_subtest()
        # Get added OVS groups
        added_ovs_groups = (len(initial_ovs_groups) -
                            len(test_utils.get_ovs_groups(
                                compute_nodes, [ovs_br])))
        # Check if group added successfully
        results.record_action("Check if a new group was added to OVS")
        msg = "New OVS group added"
        results.add_to_summary(0, "-")
        if added_ovs_groups != 0:
            results.add_success(msg)
        else:
            results.add_failure(msg)
        results.add_to_summary(0, "=")
        # Backup OVS controller connection info.
        # To support HA changes should be made here.
        get_ext_ip_cmd = "sudo ovs-vsctl get-controller {}".format(ovs_br)
        ovs_controller_conn = (compute_nodes[0].run_cmd(get_ext_ip_cmd).
                               strip().split('\n')[0])
        # Disconnect OVS from controller
        for compute_node in compute_nodes:
            compute_node.run_cmd("sudo ovs-vsctl del-controller {}".
                                 format(ovs_br))
    except Exception as e:
        logger.error("exception occurred while executing testcase_1: %s", e)
        raise
    finally:
        # Cleanup topology
        test_utils.cleanup_nova(nova_client, instance_ids)
        test_utils.cleanup_glance(glance_client, image_ids)
        test_utils.cleanup_neutron(neutron_client, floatingip_ids, bgpvpn_ids,
                                   interfaces, subnet_ids, router_ids,
                                   network_ids)
    # Connect again OVS to Controller
    for compute_node in compute_nodes:
        compute_node.run_cmd("sudo ovs-vsctl set-controller {} {}".
                             format(ovs_br, ovs_controller_conn))
    logger.info("Wait before subtest")
    test_utils.wait_before_subtest()
    # Get OVS groups added after the reconnection
    added_ovs_groups = (len(initial_ovs_groups) -
                        len(test_utils.get_ovs_groups(
                            compute_nodes, [ovs_br])))

    # Check if group removed successfully
    results.record_action("Check if group was removed from OVS "
                          "after deleting the topology.")
    msg = ""
    # After removing the topology, groups must be equal to the initial
    if added_ovs_groups != 0:
        msg += " Additional group was not deleted from OVS"
    results.add_to_summary(0, "-")
    if len(msg) == 0:
        msg = "Group was deleted from ovs"
        results.add_success(msg)
    else:
        results.add_failure(msg)

    return results.compile_summary()
Ejemplo n.º 5
0
    def execute(self):

        nova_client = os_utils.get_nova_client()
        neutron_client = os_utils.get_neutron_client()

        tenant_id = os_utils.get_tenant_id(os_utils.get_keystone_client(),
                                           os.environ['OS_PROJECT_NAME'])

        neutron_quota = test_utils.get_neutron_quota(neutron_client, tenant_id)
        (neutron_nw_quota, neutron_subnet_quota, neutron_port_quota,
         neutron_router_quota) = (
            neutron_quota['network'], neutron_quota['subnet'],
            neutron_quota['port'], neutron_quota['router'])
        instances_quota = test_utils.get_nova_instances_quota(nova_client)

        self.logger.info("Setting net/subnet/port/router "
                         "quota to unlimited")
        test_utils.update_nw_subnet_port_quota(
            neutron_client,
            tenant_id,
            COMMON_CONFIG.neutron_nw_quota,
            COMMON_CONFIG.neutron_subnet_quota,
            COMMON_CONFIG.neutron_port_quota,
            COMMON_CONFIG.neutron_router_quota)
        test_utils.create_default_flavor()

        # Workaround for
        # https://jira.opnfv.org/projects/SDNVPN/issues/SDNVPN-115
        self.logger.info("Setting instances quota class to unlimited")
        test_utils.update_instance_quota_class(
            nova_client,
            COMMON_CONFIG.nova_instances_quota_class)

        with open(COMMON_CONFIG.config_file) as f:
            config_yaml = yaml.safe_load(f)

        testcases = config_yaml.get("testcases")
        overall_status = "PASS"
        for tc in testcases:
            if testcases[tc]['enabled']:
                test_name = tc
                test_descr = testcases[tc]['description']
                title = ("Running '%s - %s'" %
                         (test_name, test_descr))
                self.logger.info(title)
                self.logger.info("%s\n" % ("=" * len(title)))
                try:
                    self.logger.info("Importing the testcase %s" % test_name)
                    t = importlib.import_module(test_name, package=None)
                    self.logger.info("Calling the testcase %s main method"
                                     % test_name)
                    result = t.main()
                    self.logger.info("Execution is complete for the"
                                     " testcase %s" % test_name)
                except Exception as ex:
                    result = -1
                    self.logger.info("Caught Exception in %s: %s Trace: %s"
                                     % (test_name, ex,
                                        traceback.format_exc()))
                if result < 0:
                    status = "FAIL"
                    overall_status = "FAIL"
                    self.logger.info("Testcase %s failed" % test_name)
                else:
                    status = result.get("status")
                    self.details.update(
                        {test_name: {'status': status,
                                     'details': result.get("details")}})
                    self.logger.info("Results of test case '%s - %s':\n%s\n"
                                     % (test_name, test_descr, result))

                    if status == "FAIL":
                        overall_status = "FAIL"

        self.logger.info("Resetting subnet/net/port quota")
        test_utils.update_nw_subnet_port_quota(neutron_client,
                                               tenant_id,
                                               neutron_nw_quota,
                                               neutron_subnet_quota,
                                               neutron_port_quota,
                                               neutron_router_quota)

        self.logger.info("Resetting instances quota class")
        test_utils.update_instance_quota_class(nova_client, instances_quota)

        try:
            installer_type = str(os.environ['INSTALLER_TYPE'].lower())
            if installer_type in ["fuel", "apex"]:
                gather_logs('overall')
            else:
                self.logger.info("Skipping log gathering because installer"
                                 "type %s is neither fuel nor apex" %
                                 installer_type)
        except Exception as ex:
            self.logger.error(('Something went wrong in the Log gathering.'
                               'Ex: %s, Trace: %s')
                              % (ex, traceback.format_exc()))

        if overall_status == "PASS":
            self.result = 100
            return feature.Feature.EX_OK

        return feature.Feature.EX_RUN_ERROR
Ejemplo n.º 6
0
def main():
    results = Results(COMMON_CONFIG.line_length)

    results.add_to_summary(0, "=")
    results.add_to_summary(2, "STATUS", "SUBTEST")
    results.add_to_summary(0, "=")

    nova_client = os_utils.get_nova_client()
    neutron_client = os_utils.get_neutron_client()
    glance_client = os_utils.get_glance_client()

    (floatingip_ids, instance_ids, router_ids, network_ids, image_ids,
     subnet_ids, interfaces, bgpvpn_ids) = ([] for i in range(8))

    try:
        image_id = os_utils.create_glance_image(
            glance_client, TESTCASE_CONFIG.image_name,
            COMMON_CONFIG.image_path, disk=COMMON_CONFIG.image_format,
            container="bare", public='public')
        image_ids.append(image_id)

        network_1_id, subnet_1_id, router_1_id = test_utils.create_network(
            neutron_client,
            TESTCASE_CONFIG.net_1_name,
            TESTCASE_CONFIG.subnet_1_name,
            TESTCASE_CONFIG.subnet_1_cidr,
            TESTCASE_CONFIG.router_1_name)

        network_2_id = test_utils.create_net(
            neutron_client,
            TESTCASE_CONFIG.net_2_name)

        subnet_2_id = test_utils.create_subnet(
            neutron_client,
            TESTCASE_CONFIG.subnet_2_name,
            TESTCASE_CONFIG.subnet_2_cidr,
            network_2_id)
        interfaces.append(tuple((router_1_id, subnet_1_id)))
        network_ids.extend([network_1_id, network_2_id])
        router_ids.append(router_1_id)
        subnet_ids.extend([subnet_1_id, subnet_2_id])

        sg_id = os_utils.create_security_group_full(
            neutron_client,
            TESTCASE_CONFIG.secgroup_name,
            TESTCASE_CONFIG.secgroup_descr)

        compute_nodes = test_utils.assert_and_get_compute_nodes(nova_client)

        av_zone_1 = "nova:" + compute_nodes[0]
        av_zone_2 = "nova:" + compute_nodes[1]

        # boot INTANCES
        vm_2 = test_utils.create_instance(
            nova_client,
            TESTCASE_CONFIG.instance_2_name,
            image_id,
            network_1_id,
            sg_id,
            secgroup_name=TESTCASE_CONFIG.secgroup_name,
            compute_node=av_zone_1)
        vm_2_ip = test_utils.get_instance_ip(vm_2)

        vm_3 = test_utils.create_instance(
            nova_client,
            TESTCASE_CONFIG.instance_3_name,
            image_id,
            network_1_id,
            sg_id,
            secgroup_name=TESTCASE_CONFIG.secgroup_name,
            compute_node=av_zone_2)
        vm_3_ip = test_utils.get_instance_ip(vm_3)

        vm_5 = test_utils.create_instance(
            nova_client,
            TESTCASE_CONFIG.instance_5_name,
            image_id,
            network_2_id,
            sg_id,
            secgroup_name=TESTCASE_CONFIG.secgroup_name,
            compute_node=av_zone_2)
        vm_5_ip = test_utils.get_instance_ip(vm_5)

        # We boot vm5 first because we need vm5_ip for vm4 userdata
        u4 = test_utils.generate_ping_userdata([vm_5_ip])
        vm_4 = test_utils.create_instance(
            nova_client,
            TESTCASE_CONFIG.instance_4_name,
            image_id,
            network_2_id,
            sg_id,
            secgroup_name=TESTCASE_CONFIG.secgroup_name,
            compute_node=av_zone_1,
            userdata=u4)
        vm_4_ip = test_utils.get_instance_ip(vm_4)

        # We boot VM1 at the end because we need to get the IPs
        # first to generate the userdata
        u1 = test_utils.generate_ping_userdata([vm_2_ip,
                                                vm_3_ip,
                                                vm_4_ip,
                                                vm_5_ip])
        vm_1 = test_utils.create_instance(
            nova_client,
            TESTCASE_CONFIG.instance_1_name,
            image_id,
            network_1_id,
            sg_id,
            secgroup_name=TESTCASE_CONFIG.secgroup_name,
            compute_node=av_zone_1,
            userdata=u1)

        instance_ids.extend([vm_1.id, vm_2.id, vm_3.id, vm_4.id, vm_5.id])

        msg = ("Create VPN with eRT<>iRT")
        results.record_action(msg)
        vpn_name = "sdnvpn-" + str(randint(100000, 999999))
        kwargs = {
            "import_targets": TESTCASE_CONFIG.targets1,
            "export_targets": TESTCASE_CONFIG.targets2,
            "route_distinguishers": TESTCASE_CONFIG.route_distinguishers,
            "name": vpn_name
        }
        bgpvpn = test_utils.create_bgpvpn(neutron_client, **kwargs)
        bgpvpn_id = bgpvpn['bgpvpn']['id']
        logger.debug("VPN created details: %s" % bgpvpn)
        bgpvpn_ids.append(bgpvpn_id)

        msg = ("Associate router '%s' to the VPN." %
               TESTCASE_CONFIG.router_1_name)
        results.record_action(msg)
        results.add_to_summary(0, "-")

        test_utils.create_router_association(
            neutron_client, bgpvpn_id, router_1_id)

        # Wait for VMs to get ips.
        instances_up = test_utils.wait_for_instances_up(vm_2, vm_3, vm_5)
        instances_dhcp_up = test_utils.wait_for_instances_get_dhcp(vm_1, vm_4)

        if (not instances_up or not instances_dhcp_up):
            logger.error("One or more instances are down")
            # TODO: Handle this appropriately

        results.get_ping_status(vm_1, vm_2, expected="PASS", timeout=200)
        results.get_ping_status(vm_1, vm_3, expected="PASS", timeout=30)
        results.get_ping_status(vm_1, vm_4, expected="FAIL", timeout=30)

        msg = ("Associate network '%s' to the VPN." %
               TESTCASE_CONFIG.net_2_name)
        results.add_to_summary(0, "-")
        results.record_action(msg)
        results.add_to_summary(0, "-")
        test_utils.create_network_association(
            neutron_client, bgpvpn_id, network_2_id)

        test_utils.wait_for_bgp_router_assoc(
            neutron_client, bgpvpn_id, router_1_id)
        test_utils.wait_for_bgp_net_assoc(
            neutron_client, bgpvpn_id, network_2_id)

        logger.info("Waiting for the VMs to connect to each other using the"
                    " updated network configuration")
        test_utils.wait_before_subtest()

        results.get_ping_status(vm_4, vm_5, expected="PASS", timeout=30)
        # TODO enable again when isolation in VPN with iRT != eRT works
        # results.get_ping_status(vm_1, vm_4, expected="FAIL", timeout=30)
        # results.get_ping_status(vm_1, vm_5, expected="FAIL", timeout=30)

        msg = ("Update VPN with eRT=iRT ...")
        results.add_to_summary(0, "-")
        results.record_action(msg)
        results.add_to_summary(0, "-")

        # use bgpvpn-create instead of update till NETVIRT-1067 bug is fixed
        # kwargs = {"import_targets": TESTCASE_CONFIG.targets1,
        #           "export_targets": TESTCASE_CONFIG.targets1,
        #           "name": vpn_name}
        # bgpvpn = test_utils.update_bgpvpn(neutron_client,
        #                                   bgpvpn_id, **kwargs)

        test_utils.delete_bgpvpn(neutron_client, bgpvpn_id)
        bgpvpn_ids.remove(bgpvpn_id)
        kwargs = {
            "import_targets": TESTCASE_CONFIG.targets1,
            "export_targets": TESTCASE_CONFIG.targets1,
            "route_distinguishers": TESTCASE_CONFIG.route_distinguishers,
            "name": vpn_name
        }

        test_utils.wait_before_subtest()

        bgpvpn = test_utils.create_bgpvpn(neutron_client, **kwargs)
        bgpvpn_id = bgpvpn['bgpvpn']['id']
        logger.debug("VPN re-created details: %s" % bgpvpn)
        bgpvpn_ids.append(bgpvpn_id)

        msg = ("Associate again network '%s' and router '%s 'to the VPN."
               % (TESTCASE_CONFIG.net_2_name,
                  TESTCASE_CONFIG.router_1_name))
        results.add_to_summary(0, "-")
        results.record_action(msg)
        results.add_to_summary(0, "-")

        test_utils.create_router_association(
            neutron_client, bgpvpn_id, router_1_id)

        test_utils.create_network_association(
            neutron_client, bgpvpn_id, network_2_id)

        test_utils.wait_for_bgp_router_assoc(
            neutron_client, bgpvpn_id, router_1_id)
        test_utils.wait_for_bgp_net_assoc(
            neutron_client, bgpvpn_id, network_2_id)
        # The above code has to be removed after re-enabling bgpvpn-update

        logger.info("Waiting for the VMs to connect to each other using the"
                    " updated network configuration")
        test_utils.wait_before_subtest()

        # TODO: uncomment the following once ODL netvirt fixes the following
        # bug: https://jira.opendaylight.org/browse/NETVIRT-932
        # results.get_ping_status(vm_1, vm_4, expected="PASS", timeout=30)
        # results.get_ping_status(vm_1, vm_5, expected="PASS", timeout=30)

        results.add_to_summary(0, "=")
        logger.info("\n%s" % results.summary)

    except Exception as e:
        logger.error("exception occurred while executing testcase_4: %s", e)
        raise
    finally:
        test_utils.cleanup_nova(nova_client, instance_ids)
        test_utils.cleanup_glance(glance_client, image_ids)
        test_utils.cleanup_neutron(neutron_client, floatingip_ids,
                                   bgpvpn_ids, interfaces, subnet_ids,
                                   router_ids, network_ids)

    return results.compile_summary()
Ejemplo n.º 7
0
def main():
    results = Results(COMMON_CONFIG.line_length)

    results.add_to_summary(0, "=")
    results.add_to_summary(2, "STATUS", "SUBTEST")
    results.add_to_summary(0, "=")

    nova_client = os_utils.get_nova_client()
    neutron_client = os_utils.get_neutron_client()
    glance_client = os_utils.get_glance_client()

    (floatingip_ids, instance_ids, router_ids, network_ids, image_ids,
     subnet_ids, interfaces, bgpvpn_ids) = ([] for i in range(8))

    try:
        image_id = os_utils.create_glance_image(
            glance_client, TESTCASE_CONFIG.image_name,
            COMMON_CONFIG.image_path, disk=COMMON_CONFIG.image_format,
            container="bare", public='public')
        image_ids.append(image_id)

        network_1_id, subnet_1_id, router_1_id = test_utils.create_network(
            neutron_client,
            TESTCASE_CONFIG.net_1_name,
            TESTCASE_CONFIG.subnet_1_name,
            TESTCASE_CONFIG.subnet_1_cidr,
            TESTCASE_CONFIG.router_1_name)

        network_2_id, subnet_2_id, router_1_id = test_utils.create_network(
            neutron_client,
            TESTCASE_CONFIG.net_2_name,
            TESTCASE_CONFIG.subnet_2_name,
            TESTCASE_CONFIG.subnet_2_cidr,
            TESTCASE_CONFIG.router_1_name)

        interfaces.append(tuple((router_1_id, subnet_1_id)))
        interfaces.append(tuple((router_1_id, subnet_2_id)))
        network_ids.extend([network_1_id, network_2_id])
        router_ids.append(router_1_id)
        subnet_ids.extend([subnet_1_id, subnet_2_id])

        sg_id = os_utils.create_security_group_full(
            neutron_client, TESTCASE_CONFIG.secgroup_name,
            TESTCASE_CONFIG.secgroup_descr)
        test_utils.open_icmp(neutron_client, sg_id)
        test_utils.open_http_port(neutron_client, sg_id)

        compute_nodes = test_utils.assert_and_get_compute_nodes(nova_client)
        av_zone_1 = "nova:" + compute_nodes[0]
        # spawning the VMs on the same compute because fib flow (21) entries
        # are not created properly if vm1 and vm2 are attached to two
        # different computes
        vm_2 = test_utils.create_instance(
            nova_client,
            TESTCASE_CONFIG.instance_2_name,
            image_id,
            network_2_id,
            sg_id,
            secgroup_name=TESTCASE_CONFIG.secgroup_name,
            compute_node=av_zone_1)
        vm_2_ip = test_utils.get_instance_ip(vm_2)

        u1 = test_utils.generate_ping_userdata([vm_2_ip])
        vm_1 = test_utils.create_instance(
            nova_client,
            TESTCASE_CONFIG.instance_1_name,
            image_id,
            network_1_id,
            sg_id,
            secgroup_name=TESTCASE_CONFIG.secgroup_name,
            compute_node=av_zone_1,
            userdata=u1)
        instance_ids.extend([vm_1.id, vm_2.id])
        # TODO: uncomment the lines 107-134 once ODL fixes
        # the bug https://jira.opendaylight.org/browse/NETVIRT-932
        # results.record_action("Create VPN with eRT==iRT")
        # vpn_name = "sdnvpn-8"
        # kwargs = {
        #     "import_targets": TESTCASE_CONFIG.targets,
        #     "export_targets": TESTCASE_CONFIG.targets,
        #     "route_distinguishers": TESTCASE_CONFIG.route_distinguishers,
        #     "name": vpn_name
        # }
        # bgpvpn = test_utils.create_bgpvpn(neutron_client, **kwargs)
        # bgpvpn_id = bgpvpn['bgpvpn']['id']
        # logger.debug("VPN created details: %s" % bgpvpn)
        # bgpvpn_ids.append(bgpvpn_id)

        # msg = ("Associate router '%s' and net '%s' to the VPN."
        #        % (TESTCASE_CONFIG.router_1_name,
        #           TESTCASE_CONFIG.net_2_name))
        # results.record_action(msg)
        # results.add_to_summary(0, "-")

        # test_utils.create_router_association(
        #     neutron_client, bgpvpn_id, router_1_id)
        # test_utils.create_network_association(
        #     neutron_client, bgpvpn_id, network_2_id)

        # test_utils.wait_for_bgp_router_assoc(
        #     neutron_client, bgpvpn_id, router_1_id)
        # test_utils.wait_for_bgp_net_assoc(
        #     neutron_client, bgpvpn_id, network_2_id)

        # Wait for VMs to get ips.
        instances_up = test_utils.wait_for_instances_up(vm_2)
        instances_dhcp_up = test_utils.wait_for_instances_get_dhcp(vm_1)

        if (not instances_up or not instances_dhcp_up):
            logger.error("One or more instances are down")
            # TODO: Handle this appropriately

        logger.info("Waiting for the VMs to connect to each other using the"
                    " updated network configuration")
        test_utils.wait_before_subtest()

        results.get_ping_status(vm_1, vm_2, expected="PASS", timeout=200)
        results.add_to_summary(0, "=")

        msg = "Assign a Floating IP to %s" % vm_1.name
        results.record_action(msg)

        fip = os_utils.create_floating_ip(neutron_client)

        fip_added = os_utils.add_floating_ip(nova_client,
                                             vm_1.id, fip['fip_addr'])
        if fip_added:
            results.add_success(msg)
        else:
            results.add_failure(msg)

        results.add_to_summary(0, "=")
        results.record_action("Ping %s via Floating IP" % vm_1.name)
        results.add_to_summary(0, "-")
        results.ping_ip_test(fip['fip_addr'])

        floatingip_ids.append(fip['fip_id'])

    except Exception as e:
        logger.error("exception occurred while executing testcase_8: %s", e)
        raise
    finally:
        test_utils.cleanup_nova(nova_client, instance_ids)
        test_utils.cleanup_glance(glance_client, image_ids)
        test_utils.cleanup_neutron(neutron_client, floatingip_ids,
                                   bgpvpn_ids, interfaces, subnet_ids,
                                   router_ids, network_ids)

    return results.compile_summary()
Ejemplo n.º 8
0
def main():
    results = Results(COMMON_CONFIG.line_length)

    results.add_to_summary(0, "=")
    results.add_to_summary(2, "STATUS", "SUBTEST")
    results.add_to_summary(0, "=")

    nova_client = os_utils.get_nova_client()
    neutron_client = os_utils.get_neutron_client()
    glance_client = os_utils.get_glance_client()

    (floatingip_ids, instance_ids, router_ids, network_ids, image_ids,
     subnet_ids, interfaces, bgpvpn_ids) = ([] for i in range(8))

    try:
        image_id = os_utils.create_glance_image(
            glance_client,
            TESTCASE_CONFIG.image_name,
            COMMON_CONFIG.image_path,
            disk=COMMON_CONFIG.image_format,
            container="bare",
            public='public')
        image_ids.append(image_id)

        network_1_id, subnet_1_id, router_1_id = test_utils.create_network(
            neutron_client, TESTCASE_CONFIG.net_1_name,
            TESTCASE_CONFIG.subnet_1_name, TESTCASE_CONFIG.subnet_1_cidr,
            TESTCASE_CONFIG.router_1_name)

        network_2_id, subnet_2_id, router_2_id = test_utils.create_network(
            neutron_client, TESTCASE_CONFIG.net_2_name,
            TESTCASE_CONFIG.subnet_2_name, TESTCASE_CONFIG.subnet_2_cidr,
            TESTCASE_CONFIG.router_2_name)

        interfaces.append(tuple((router_1_id, subnet_1_id)))
        interfaces.append(tuple((router_2_id, subnet_2_id)))
        network_ids.extend([network_1_id, network_2_id])
        router_ids.extend([router_1_id, router_2_id])
        subnet_ids.extend([subnet_1_id, subnet_2_id])

        sg_id = os_utils.create_security_group_full(
            neutron_client, TESTCASE_CONFIG.secgroup_name,
            TESTCASE_CONFIG.secgroup_descr)
        test_utils.open_icmp(neutron_client, sg_id)
        test_utils.open_http_port(neutron_client, sg_id)

        vm_2 = test_utils.create_instance(
            nova_client,
            TESTCASE_CONFIG.instance_2_name,
            image_id,
            network_2_id,
            sg_id,
            secgroup_name=TESTCASE_CONFIG.secgroup_name)
        vm_2_ip = test_utils.get_instance_ip(vm_2)

        u1 = test_utils.generate_ping_userdata([vm_2_ip])
        vm_1 = test_utils.create_instance(
            nova_client,
            TESTCASE_CONFIG.instance_1_name,
            image_id,
            network_1_id,
            sg_id,
            secgroup_name=TESTCASE_CONFIG.secgroup_name,
            userdata=u1)

        instance_ids.extend([vm_1.id, vm_2.id])

        msg = ("Create VPN with eRT==iRT")
        results.record_action(msg)
        vpn_name = "sdnvpn-7"
        kwargs = {
            "import_targets": TESTCASE_CONFIG.targets,
            "export_targets": TESTCASE_CONFIG.targets,
            "route_distinguishers": TESTCASE_CONFIG.route_distinguishers,
            "name": vpn_name
        }
        bgpvpn = test_utils.create_bgpvpn(neutron_client, **kwargs)
        bgpvpn_id = bgpvpn['bgpvpn']['id']
        logger.debug("VPN created details: %s" % bgpvpn)
        bgpvpn_ids.append(bgpvpn_id)

        msg = ("Associate networks '%s', '%s' to the VPN." %
               (TESTCASE_CONFIG.net_1_name, TESTCASE_CONFIG.net_2_name))
        results.record_action(msg)
        results.add_to_summary(0, "-")

        test_utils.create_network_association(neutron_client, bgpvpn_id,
                                              network_1_id)
        test_utils.create_network_association(neutron_client, bgpvpn_id,
                                              network_2_id)

        test_utils.wait_for_bgp_net_assoc(neutron_client, bgpvpn_id,
                                          network_1_id)
        test_utils.wait_for_bgp_net_assoc(neutron_client, bgpvpn_id,
                                          network_2_id)

        # Wait for VMs to get ips.
        instances_up = test_utils.wait_for_instances_up(vm_2)
        instances_dhcp_up = test_utils.wait_for_instances_get_dhcp(vm_1)

        if (not instances_up or not instances_dhcp_up):
            logger.error("One or more instances are down")
            # TODO: Handle this appropriately

        logger.info("Waiting for the VMs to connect to each other using the"
                    " updated network configuration")
        test_utils.wait_before_subtest()

        results.get_ping_status(vm_1, vm_2, expected="PASS", timeout=200)
        results.add_to_summary(0, "=")

        msg = "Assign a Floating IP to %s and ping it" % vm_2.name
        results.record_action(msg)
        results.add_to_summary(0, '-')

        fip = os_utils.create_floating_ip(neutron_client)
        fip_added = os_utils.add_floating_ip(nova_client, vm_2.id,
                                             fip['fip_addr'])
        if fip_added:
            results.add_success(msg)
        else:
            results.add_failure(msg)

        results.ping_ip_test(fip['fip_addr'])

        floatingip_ids.append(fip['fip_id'])

    except Exception as e:
        logger.error("exception occurred while executing testcase_7: %s", e)
        raise
    finally:
        test_utils.cleanup_nova(nova_client, instance_ids)
        test_utils.cleanup_glance(glance_client, image_ids)
        test_utils.cleanup_neutron(neutron_client, floatingip_ids, bgpvpn_ids,
                                   interfaces, subnet_ids, router_ids,
                                   network_ids)

    return results.compile_summary()
Ejemplo n.º 9
0
def main():
    results = Results(COMMON_CONFIG.line_length)

    results.add_to_summary(0, "=")
    results.add_to_summary(2, "STATUS", "SUBTEST")
    results.add_to_summary(0, "=")

    nova_client = os_utils.get_nova_client()
    neutron_client = os_utils.get_neutron_client()
    glance_client = os_utils.get_glance_client()

    (floatingip_ids, instance_ids, router_ids, network_ids, image_ids,
     subnet_ids, interfaces, bgpvpn_ids) = ([] for i in range(8))

    try:
        logger.debug("Using private key %s injected to the VMs."
                     % COMMON_CONFIG.keyfile_path)
        keyfile = open(COMMON_CONFIG.keyfile_path, 'r')
        key = keyfile.read()
        keyfile.close()
        files = {"/home/cirros/id_rsa": key}

        image_id = os_utils.create_glance_image(
            glance_client, TESTCASE_CONFIG.image_name,
            COMMON_CONFIG.image_path, disk=COMMON_CONFIG.image_format,
            container="bare", public='public')
        image_ids.append(image_id)

        network_1_id = test_utils.create_net(
            neutron_client,
            TESTCASE_CONFIG.net_1_name)
        subnet_1a_id = test_utils.create_subnet(
            neutron_client,
            TESTCASE_CONFIG.subnet_1a_name,
            TESTCASE_CONFIG.subnet_1a_cidr,
            network_1_id)
        # TODO: uncomment the commented lines once ODL has
        # support for mulitple subnets under same neutron network
        # subnet_1b_id = test_utils.create_subnet(
        #     neutron_client,
        #     TESTCASE_CONFIG.subnet_1b_name,
        #     TESTCASE_CONFIG.subnet_1b_cidr,
        #     network_1_id)

        network_2_id = test_utils.create_net(
            neutron_client,
            TESTCASE_CONFIG.net_2_name)
        # subnet_2a_id = test_utils.create_subnet(
        #     neutron_client,
        #     TESTCASE_CONFIG.subnet_2a_name,
        #     TESTCASE_CONFIG.subnet_2a_cidr,
        #     network_2_id)
        subnet_2b_id = test_utils.create_subnet(
            neutron_client,
            TESTCASE_CONFIG.subnet_2b_name,
            TESTCASE_CONFIG.subnet_2b_cidr,
            network_2_id)
        network_ids.extend([network_1_id, network_2_id])
        subnet_ids.extend([subnet_1a_id,
                           # subnet_1b_id,
                           # subnet_2a_id,
                           subnet_2b_id])

        sg_id = os_utils.create_security_group_full(
            neutron_client, TESTCASE_CONFIG.secgroup_name,
            TESTCASE_CONFIG.secgroup_descr)

        compute_nodes = test_utils.assert_and_get_compute_nodes(nova_client)

        av_zone_1 = "nova:" + compute_nodes[0]
        # av_zone_2 = "nova:" + compute_nodes[1]

        # boot INTANCES
        userdata_common = test_utils.generate_userdata_common()
        vm_2 = test_utils.create_instance(
            nova_client,
            TESTCASE_CONFIG.instance_2_name,
            image_id,
            network_1_id,
            sg_id,
            fixed_ip=TESTCASE_CONFIG.instance_2_ip,
            secgroup_name=TESTCASE_CONFIG.secgroup_name,
            compute_node=av_zone_1,
            userdata=userdata_common)


#         vm_3 = test_utils.create_instance(
#             nova_client,
#             TESTCASE_CONFIG.instance_3_name,
#             image_id,
#             network_1_id,
#             sg_id,
#             fixed_ip=TESTCASE_CONFIG.instance_3_ip,
#             secgroup_name=TESTCASE_CONFIG.secgroup_name,
#             compute_node=av_zone_2,
#             userdata=userdata_common)
#
#         vm_5 = test_utils.create_instance(
#             nova_client,
#             TESTCASE_CONFIG.instance_5_name,
#             image_id,
#             network_2_id,
#             sg_id,
#             fixed_ip=TESTCASE_CONFIG.instance_5_ip,
#             secgroup_name=TESTCASE_CONFIG.secgroup_name,
#             compute_node=av_zone_2,
#             userdata=userdata_common)

        # We boot vm5 first because we need vm5_ip for vm4 userdata
        u4 = test_utils.generate_userdata_with_ssh(
            [TESTCASE_CONFIG.instance_1_ip
             # TESTCASE_CONFIG.instance_3_ip,
             # TESTCASE_CONFIG.instance_5_ip
             ])
        vm_4 = test_utils.create_instance(
            nova_client,
            TESTCASE_CONFIG.instance_4_name,
            image_id,
            network_2_id,
            sg_id,
            fixed_ip=TESTCASE_CONFIG.instance_4_ip,
            secgroup_name=TESTCASE_CONFIG.secgroup_name,
            compute_node=av_zone_1,
            userdata=u4,
            files=files)

        # We boot VM1 at the end because we need to get the IPs first
        # to generate the userdata
        u1 = test_utils.generate_userdata_with_ssh(
            [TESTCASE_CONFIG.instance_2_ip,
             # TESTCASE_CONFIG.instance_3_ip,
             TESTCASE_CONFIG.instance_4_ip,
             # TESTCASE_CONFIG.instance_5_ip
             ])
        vm_1 = test_utils.create_instance(
            nova_client,
            TESTCASE_CONFIG.instance_1_name,
            image_id,
            network_1_id,
            sg_id,
            fixed_ip=TESTCASE_CONFIG.instance_1_ip,
            secgroup_name=TESTCASE_CONFIG.secgroup_name,
            compute_node=av_zone_1,
            userdata=u1,
            files=files)
        instance_ids.extend([vm_1.id,
                             vm_2.id,
                             # vm_3.id,
                             vm_4.id,
                             #  vm_5.id
                             ])

        msg = ("Create VPN1 with eRT=iRT")
        results.record_action(msg)
        vpn1_name = "sdnvpn-1-" + str(randint(100000, 999999))
        kwargs = {
            "import_targets": TESTCASE_CONFIG.targets2,
            "export_targets": TESTCASE_CONFIG.targets2,
            "route_targets": TESTCASE_CONFIG.targets2,
            "route_distinguishers": TESTCASE_CONFIG.route_distinguishers1,
            "name": vpn1_name
        }
        bgpvpn1 = test_utils.create_bgpvpn(neutron_client, **kwargs)
        bgpvpn1_id = bgpvpn1['bgpvpn']['id']
        logger.debug("VPN1 created details: %s" % bgpvpn1)
        bgpvpn_ids.append(bgpvpn1_id)

        msg = ("Associate network '%s' to the VPN." %
               TESTCASE_CONFIG.net_1_name)
        results.record_action(msg)
        results.add_to_summary(0, "-")

        test_utils.create_network_association(
            neutron_client, bgpvpn1_id, network_1_id)

        # Wait for VMs to get ips.
        instances_up = test_utils.wait_for_instances_up(vm_2)
        instances_dhcp_up = test_utils.wait_for_instances_get_dhcp(vm_1, vm_4)

        if (not instances_up or not instances_dhcp_up):
            logger.error("One or more instances are down")
            # TODO: Handle this appropriately

        logger.info("Waiting for the VMs to connect to each other using the"
                    " updated network configuration")
        test_utils.wait_before_subtest()

        # 10.10.10.12 should return sdnvpn-2 to sdnvpn-1
        results.check_ssh_output(vm_1, vm_2,
                                 expected=TESTCASE_CONFIG.instance_2_name,
                                 timeout=200)
        # 10.10.11.13 should return sdnvpn-3 to sdnvpn-1
        # results.check_ssh_output(vm_1, vm_3,
        #                          expected=TESTCASE_CONFIG.instance_3_name,
        #                          timeout=30)

        results.add_to_summary(0, "-")
        msg = ("Create VPN2 with eRT=iRT")
        results.record_action(msg)
        vpn2_name = "sdnvpn-2-" + str(randint(100000, 999999))
        kwargs = {
            "import_targets": TESTCASE_CONFIG.targets1,
            "export_targets": TESTCASE_CONFIG.targets1,
            "route_targets": TESTCASE_CONFIG.targets1,
            "route_distinguishers": TESTCASE_CONFIG.route_distinguishers2,
            "name": vpn2_name
        }
        bgpvpn2 = test_utils.create_bgpvpn(neutron_client, **kwargs)
        bgpvpn2_id = bgpvpn2['bgpvpn']['id']
        logger.debug("VPN created details: %s" % bgpvpn2)
        bgpvpn_ids.append(bgpvpn2_id)

        msg = ("Associate network '%s' to the VPN2." %
               TESTCASE_CONFIG.net_2_name)
        results.record_action(msg)
        results.add_to_summary(0, "-")

        test_utils.create_network_association(
            neutron_client, bgpvpn2_id, network_2_id)

        test_utils.wait_for_bgp_net_assoc(neutron_client,
                                          bgpvpn1_id, network_1_id)
        test_utils.wait_for_bgp_net_assoc(neutron_client,
                                          bgpvpn2_id, network_2_id)

        logger.info("Waiting for the VMs to connect to each other using the"
                    " updated network configuration")
        test_utils.wait_before_subtest()

        # 10.10.11.13 should return sdnvpn-5 to sdnvpn-4
        # results.check_ssh_output(vm_4, vm_5,
        #                          expected=TESTCASE_CONFIG.instance_5_name,
        #                          timeout=30)

        # 10.10.10.11 should return "not reachable" to sdnvpn-4
        results.check_ssh_output(vm_4, vm_1,
                                 expected="not reachable",
                                 timeout=30)

    except Exception as e:
        logger.error("exception occurred while executing testcase_2: %s", e)
        raise
    finally:
        test_utils.cleanup_nova(nova_client, instance_ids)
        test_utils.cleanup_glance(glance_client, image_ids)
        test_utils.cleanup_neutron(neutron_client, floatingip_ids,
                                   bgpvpn_ids, interfaces, subnet_ids,
                                   router_ids, network_ids)

    return results.compile_summary()
Ejemplo n.º 10
0
def main():
    results = Results(COMMON_CONFIG.line_length)

    results.add_to_summary(0, "=")
    results.add_to_summary(2, "STATUS", "SUBTEST")
    results.add_to_summary(0, "=")

    nova_client = os_utils.get_nova_client()
    neutron_client = os_utils.get_neutron_client()
    glance_client = os_utils.get_glance_client()

    (floatingip_ids, instance_ids, router_ids, network_ids, image_ids,
     subnet_ids, interfaces, bgpvpn_ids, flavor_ids) = ([] for i in range(9))

    try:
        image_id = os_utils.create_glance_image(
            glance_client,
            COMMON_CONFIG.ubuntu_image_name,
            COMMON_CONFIG.ubuntu_image_path,
            disk="qcow2",
            container="bare",
            public="public")
        image_ids.append(image_id)

        _, flavor_id = test_utils.create_custom_flavor()
        flavor_ids.append(flavor_id)

        network_1_id, subnet_1_id, router_1_id = test_utils.create_network(
            neutron_client, TESTCASE_CONFIG.net_1_name,
            TESTCASE_CONFIG.subnet_1_name, TESTCASE_CONFIG.subnet_1_cidr,
            TESTCASE_CONFIG.router_1_name)

        interfaces.append(tuple((router_1_id, subnet_1_id)))
        network_ids.extend([network_1_id])
        subnet_ids.extend([subnet_1_id])
        router_ids.extend([router_1_id])

        sg_id = os_utils.create_security_group_full(
            neutron_client, TESTCASE_CONFIG.secgroup_name,
            TESTCASE_CONFIG.secgroup_descr)

        compute_nodes = test_utils.assert_and_get_compute_nodes(nova_client)

        av_zone_1 = "nova:" + compute_nodes[0]
        av_zone_2 = "nova:" + compute_nodes[1]

        u1 = test_utils.generate_userdata_interface_create(
            TESTCASE_CONFIG.interface_name, TESTCASE_CONFIG.interface_number,
            TESTCASE_CONFIG.extra_route_ip,
            TESTCASE_CONFIG.extra_route_subnet_mask)
        # boot INTANCES
        vm_1 = test_utils.create_instance(
            nova_client,
            TESTCASE_CONFIG.instance_1_name,
            image_id,
            network_1_id,
            sg_id,
            flavor=COMMON_CONFIG.custom_flavor_name,
            secgroup_name=TESTCASE_CONFIG.secgroup_name,
            compute_node=av_zone_1,
            userdata=u1)
        vm_1_ip = test_utils.get_instance_ip(vm_1)

        vm1_port = test_utils.get_port(neutron_client, vm_1.id)
        test_utils.update_port_allowed_address_pairs(
            neutron_client, vm1_port['id'], [
                test_utils.AllowedAddressPair(TESTCASE_CONFIG.extra_route_cidr,
                                              vm1_port['mac_address'])
            ])

        vm_2 = test_utils.create_instance(
            nova_client,
            TESTCASE_CONFIG.instance_2_name,
            image_id,
            network_1_id,
            sg_id,
            flavor=COMMON_CONFIG.custom_flavor_name,
            secgroup_name=TESTCASE_CONFIG.secgroup_name,
            compute_node=av_zone_1,
            userdata=u1)
        vm_2_ip = test_utils.get_instance_ip(vm_2)

        vm2_port = test_utils.get_port(neutron_client, vm_2.id)
        test_utils.update_port_allowed_address_pairs(
            neutron_client, vm2_port['id'], [
                test_utils.AllowedAddressPair(TESTCASE_CONFIG.extra_route_cidr,
                                              vm2_port['mac_address'])
            ])

        test_utils.async_Wait_for_instances([vm_1, vm_2])

        image_2_id = os_utils.create_glance_image(
            glance_client,
            TESTCASE_CONFIG.image_name,
            COMMON_CONFIG.image_path,
            disk=COMMON_CONFIG.image_format,
            container="bare",
            public='public')
        image_ids.append(image_2_id)
        # Moved vm_3 creation before associating its network/router with
        # bgpvpn. If VM is created after its network is associated to bgpvpn
        # via router, then BGPVPN in ODL uses router's vrf id for newly created
        # VMs which causes testcase to fail.
        u3 = test_utils.generate_ping_userdata(
            [TESTCASE_CONFIG.extra_route_ip])
        vm_3 = test_utils.create_instance(
            nova_client,
            TESTCASE_CONFIG.instance_3_name,
            image_2_id,
            network_1_id,
            sg_id,
            flavor=COMMON_CONFIG.custom_flavor_name,
            secgroup_name=TESTCASE_CONFIG.secgroup_name,
            compute_node=av_zone_2,
            userdata=u3)

        instance_ids.extend([vm_1.id, vm_2.id, vm_3.id])

        instance_dhcp_up = test_utils.wait_for_instances_get_dhcp(vm_3)

        if (not instance_dhcp_up):
            logger.error("vm_3 instance is down")

        msg = ("Create VPN with multiple RDs")
        results.record_action(msg)
        vpn_name = "sdnvpn-" + str(randint(100000, 999999))
        kwargs = {
            "import_targets": TESTCASE_CONFIG.targets1,
            "export_targets": TESTCASE_CONFIG.targets2,
            "route_distinguishers": TESTCASE_CONFIG.route_distinguishers,
            "name": vpn_name
        }
        bgpvpn = test_utils.create_bgpvpn(neutron_client, **kwargs)
        bgpvpn_id = bgpvpn['bgpvpn']['id']
        logger.debug("VPN created details: %s" % bgpvpn)
        bgpvpn_ids.append(bgpvpn_id)

        msg = ("Associate router '%s' to the VPN." %
               TESTCASE_CONFIG.router_1_name)
        results.record_action(msg)
        results.add_to_summary(0, "-")

        test_utils.create_router_association(neutron_client, bgpvpn_id,
                                             router_1_id)

        test_utils.update_router_extra_route(neutron_client, router_1_id, [
            test_utils.ExtraRoute(TESTCASE_CONFIG.extra_route_cidr, vm_1_ip),
            test_utils.ExtraRoute(TESTCASE_CONFIG.extra_route_cidr, vm_2_ip)
        ])

        logger.info("Waiting for the VMs to connect to each other using the"
                    " updated network configuration")
        test_utils.wait_before_subtest()

        results.get_ping_status_target_ip(vm_3,
                                          TESTCASE_CONFIG.extra_route_name,
                                          TESTCASE_CONFIG.extra_route_ip,
                                          expected="PASS",
                                          timeout=300)

        results.add_to_summary(0, "=")
        logger.info("\n%s" % results.summary)

    except Exception as e:
        logger.error("exception occurred while executing testcase_13: %s", e)
        raise
    finally:
        test_utils.update_router_no_extra_route(neutron_client, router_ids)
        test_utils.cleanup_nova(nova_client, instance_ids, flavor_ids)
        test_utils.cleanup_glance(glance_client, image_ids)
        test_utils.cleanup_neutron(neutron_client, floatingip_ids, bgpvpn_ids,
                                   interfaces, subnet_ids, router_ids,
                                   network_ids)

    return results.compile_summary()