def seal_obj():
# params obj
params = EncryptionParameters()
# set params
params.set_poly_modulus("1x^4096 + 1")
params.set_coeff_modulus(seal.coeff_modulus_128(4096))
params.set_plain_modulus(1 << 16)
# get context
context = SEALContext(params)
# get evaluator
evaluator = Evaluator(context)
# gen keys
keygen = KeyGenerator(context)
public_key = keygen.public_key()
private_key = keygen.secret_key()
# evaluator keys
ev_keys = EvaluationKeys()
keygen.generate_evaluation_keys(30, ev_keys)
# get encryptor and decryptor
encryptor = Encryptor(context, public_key)
decryptor = Decryptor(context, private_key)
# float number encoder
encoder = FractionalEncoder(context.plain_modulus(),
context.poly_modulus(), 64, 32, 3)
return evaluator, encoder.encode, encoder.decode, encryptor.encrypt, decryptor.decrypt, ev_keys
def __init__(self):
# set parameters for encryption
parms = EncryptionParameters()
parms.set_poly_modulus("1x^2048 + 1")
parms.set_coeff_modulus(seal.coeff_modulus_128(2048))
parms.set_plain_modulus(1 << 8)
self.context = SEALContext(parms)
keygen = KeyGenerator(self.context)
self.encoder = IntegerEncoder(self.context.plain_modulus())
public_key = keygen.public_key()
self.encryptor = Encryptor(self.context, public_key)
secret_key = keygen.secret_key()
self.decryptor = Decryptor(self.context, secret_key)
def initialize_encryption():
print_example_banner("Example: Basics I");
parms = EncryptionParameters()
parms.set_poly_modulus("1x^2048 + 1")
# factor: 0xfffffffff00001.
parms.set_coeff_modulus(seal.coeff_modulus_128(2048))
parms.set_plain_modulus(1 << 8)
context = SEALContext(parms)
print_parameters(context);
# Here we choose to create an IntegerEncoder with base b=2.
encoder = IntegerEncoder(context.plain_modulus())
keygen = KeyGenerator(context)
public_key = keygen.public_key()
secret_key = keygen.secret_key()
encryptor = Encryptor(context, public_key)
evaluator = Evaluator(context)
decryptor = Decryptor(context, secret_key)
return encryptor, evaluator, decryptor, encoder, context
def __init__(self, poly_modulus = 2048 ,bit_strength = 128 ,plain_modulus = 1<<8, integral_coeffs = 64, fractional_coeffs = 32, fractional_base = 3):
parms = EncryptionParameters()
parms.set_poly_modulus("1x^{} + 1".format(poly_modulus))
if (bit_strength == 128):
parms.set_coeff_modulus(seal.coeff_modulus_128(poly_modulus))
else:
parms.set_coeff_modulus(seal.coeff_modulus_192(poly_modulus))
parms.set_plain_modulus(plain_modulus)
self.parms = parms
context = SEALContext(parms)
keygen = KeyGenerator(context)
public_key = keygen.public_key()
secret_key = keygen.secret_key()
self.encryptor = Encryptor(context, public_key)
self.evaluator = Evaluator(context)
self.decryptor = Decryptor(context, secret_key)
self.encoder = FractionalEncoder(context.plain_modulus(), context.poly_modulus(), integral_coeffs, fractional_coeffs, fractional_base)
def example_basics_ii():
print_example_banner("Example: Basics II")
# In this example we explain what relinearization is, how to use it, and how
# it affects noise budget consumption.
# First we set the parameters, create a SEALContext, and generate the public
# and secret keys. We use slightly larger parameters than be fore to be able
# to do more homomorphic multiplications.
parms = EncryptionParameters()
parms.set_poly_modulus("1x^8192 + 1")
# The default coefficient modulus consists of the following primes:
# 0x7fffffffba0001,
# 0x7fffffffaa0001,
# 0x7fffffff7e0001,
# 0x3fffffffd60001.
# The total size is 219 bits.
parms.set_coeff_modulus(seal.coeff_modulus_128(8192))
parms.set_plain_modulus(1 << 10)
context = SEALContext(parms)
print_parameters(context)
keygen = KeyGenerator(context)
public_key = keygen.public_key()
secret_key = keygen.secret_key()
# We also set up an Encryptor, Evaluator, and Decryptor here. We will
# encrypt polynomials directly in this example, so there is no need for
# an encoder.
encryptor = Encryptor(context, public_key)
evaluator = Evaluator(context)
decryptor = Decryptor(context, secret_key)
# There are actually two more types of keys in SEAL: `evaluation keys' and
# `Galois keys'. Here we will discuss evaluation keys, and Galois keys will
# be discussed later in example_batching().
# In SEAL, a valid ciphertext consists of two or more polynomials with
# coefficients integers modulo the product of the primes in coeff_modulus.
# The current size of a ciphertext can be found using Ciphertext::size().
# A freshly encrypted ciphertext always has size 2.
#plain1 = Plaintext("1x^2 + 2x^1 + 3")
plain1 = Plaintext("1x^2 + 2x^1 + 3")
encrypted = Ciphertext()
print("")
print("Encrypting " + plain1.to_string() + ": ")
encryptor.encrypt(plain1, encrypted)
print("Done")
print("Size of a fresh encryption: " + (str)(encrypted.size()))
print("Noise budget in fresh encryption: " +
(str)(decryptor.invariant_noise_budget(encrypted)) + " bits")
# Homomorphic multiplication results in the output ciphertext growing in size.
# More precisely, if the input ciphertexts have size M and N, then the output
# ciphertext after homomorphic multiplication will have size M+N-1. In this
# case we square encrypted twice to observe this growth (also observe noise
# budget consumption).
evaluator.square(encrypted)
print("Size after squaring: " + (str)(encrypted.size()))
print("Noise budget after squaring: " +
(str)(decryptor.invariant_noise_budget(encrypted)) + " bits")
plain2 = Plaintext()
decryptor.decrypt(encrypted, plain2)
print("Second power: " + plain2.to_string())
evaluator.square(encrypted)
print("Size after squaring: " + (str)(encrypted.size()))
print("Noise budget after squaring: " +
(str)(decryptor.invariant_noise_budget(encrypted)) + " bits")
# It does not matter that the size has grown -- decryption works as usual.
# Observe from the print-out that the coefficients in the plaintext have
# grown quite large. One more squaring would cause some of them to wrap
# around plain_modulus (0x400), and as a result we would no longer obtain
# the expected result as an integer-coefficient polynomial. We can fix this
# problem to some extent by increasing plain_modulus. This would make sense,
# since we still have plenty of noise budget left.
plain2 = Plaintext()
decryptor.decrypt(encrypted, plain2)
print("Fourth power: " + plain2.to_string())
# The problem here is that homomorphic operations on large ciphertexts are
# computationally much more costly than on small ciphertexts. Specifically,
# homomorphic multiplication on input ciphertexts of size M and N will require
# O(M*N) polynomial multiplications to be performed, and an addition will
# require O(M+N) additions. Relinearization reduces the size of the ciphertexts
# after multiplication back to the initial size (2). Thus, relinearizing one
# or both inputs before the next multiplication, or e.g. before serializing the
# ciphertexts, can have a huge positive impact on performance.
# Another problem is that the noise budget consumption in multiplication is
# bigger when the input ciphertexts sizes are bigger. In a complicated
# computation the contribution of the sizes to the noise budget consumption
# can actually become the dominant term. We will point this out again below
# once we get to our example.
# Relinearization itself has both a computational cost and a noise budget cost.
# These both depend on a parameter called `decomposition bit count', which can
# be any integer at least 1 [dbc_min()] and at most 60 [dbc_max()]. A large
# decomposition bit count makes relinearization fast, but consumes more noise
# budget. A small decomposition bit count can make relinearization slower, but
# might not change the noise budget by any observable amount.
# Relinearization requires a special type of key called `evaluation keys'.
# These can be created by the KeyGenerator for any decomposition bit count.
# To relinearize a ciphertext of size M >= 2 back to size 2, we actually need
# M-2 evaluation keys. Attempting to relinearize a too large ciphertext with
# too few evaluation keys will result in an exception being thrown.
# We repeat our computation, but this time relinearize after both squarings.
# Since our ciphertext never grows past size 3 (we relinearize after every
# multiplication), it suffices to generate only one evaluation key.
# First, we need to create evaluation keys. We use a decomposition bit count
# of 16 here, which can be thought of as quite small.
ev_keys16 = EvaluationKeys()
# This function generates one single evaluation key. Another overload takes
# the number of keys to be generated as an argument, but one is all we need
# in this example (see above).
keygen.generate_evaluation_keys(16, ev_keys16)
print("")
print("Encrypting " + plain1.to_string() + ": ")
encryptor.encrypt(plain1, encrypted)
print("Done")
print("Size of a fresh encryption: " + (str)(encrypted.size()))
print("Noise budget in fresh encryption: " +
(str)(decryptor.invariant_noise_budget(encrypted)) + " bits")
evaluator.square(encrypted)
print("Size after squaring: " + (str)(encrypted.size()))
print("Noise budget after squaring: " +
(str)(decryptor.invariant_noise_budget(encrypted)) + " bits")
evaluator.relinearize(encrypted, ev_keys16)
print("Size after relinearization: " + (str)(encrypted.size()))
print("Noise budget after relinearizing (dbs = " +
(str)(ev_keys16.decomposition_bit_count()) + "): " +
(str)(decryptor.invariant_noise_budget(encrypted)) + " bits")
evaluator.square(encrypted)
print("Size after second squaring: " + (str)(encrypted.size()) + " bits")
print("Noise budget after second squaring: " +
(str)(decryptor.invariant_noise_budget(encrypted)) + " bits")
evaluator.relinearize(encrypted, ev_keys16)
print("Size after relinearization: " + (str)(encrypted.size()))
print("Noise budget after relinearizing (dbs = " +
(str)(ev_keys16.decomposition_bit_count()) + "): " +
(str)(decryptor.invariant_noise_budget(encrypted)) + " bits")
decryptor.decrypt(encrypted, plain2)
print("Fourth power: " + plain2.to_string())
# Of course the result is still the same, but this time we actually
# used less of our noise budget. This is not surprising for two reasons:
# - We used a very small decomposition bit count, which is why
# relinearization itself did not consume the noise budget by any
# observable amount;
# - Since our ciphertext sizes remain small throughout the two
# squarings, the noise budget consumption rate in multiplication
# remains as small as possible. Recall from above that operations
# on larger ciphertexts actually cause more noise growth.
# To make matters even more clear, we repeat the computation a third time,
# now using the largest possible decomposition bit count (60). We are not
# measuring the time here, but relinearization with these evaluation keys
# is significantly faster than with ev_keys16.
ev_keys60 = EvaluationKeys()
keygen.generate_evaluation_keys(seal.dbc_max(), ev_keys60)
print("")
print("Encrypting " + plain1.to_string() + ": ")
encryptor.encrypt(plain1, encrypted)
print("Done")
print("Size of a fresh encryption: " + (str)(encrypted.size()))
print("Noise budget in fresh encryption: " +
(str)(decryptor.invariant_noise_budget(encrypted)) + " bits")
evaluator.square(encrypted)
print("Size after squaring: " + (str)(encrypted.size()))
print("Noise budget after squaring: " +
(str)(decryptor.invariant_noise_budget(encrypted)) + " bits")
evaluator.relinearize(encrypted, ev_keys60)
print("Size after relinearization: " + (str)(encrypted.size()))
print("Noise budget after relinearizing (dbc = " +
(str)(ev_keys60.decomposition_bit_count()) + "): " +
(str)(decryptor.invariant_noise_budget(encrypted)) + " bits")
evaluator.square(encrypted)
print("Size after second squaring: " + (str)(encrypted.size()))
print("Noise budget after second squaring: " +
(str)(decryptor.invariant_noise_budget) + " bits")
evaluator.relinearize(encrypted, ev_keys60)
print("Size after relinearization: " + (str)(encrypted.size()))
print("Noise budget after relinearizing (dbc = " +
(str)(ev_keys60.decomposition_bit_count()) + "): " +
(str)(decryptor.invariant_noise_budget(encrypted)) + " bits")
decryptor.decrypt(encrypted, plain2)
print("Fourth power: " + plain2.to_string())
# Observe from the print-out that we have now used significantly more of our
# noise budget than in the two previous runs. This is again not surprising,
# since the first relinearization chops off a huge part of the noise budget.
# However, note that the second relinearization does not change the noise
# budget by any observable amount. This is very important to understand when
# optimal performance is desired: relinearization always drops the noise
# budget from the maximum (freshly encrypted ciphertext) down to a fixed
# amount depending on the encryption parameters and the decomposition bit
# count. On the other hand, homomorphic multiplication always consumes the
# noise budget from its current level. This is why the second relinearization
# does not change the noise budget anymore: it is already consumed past the
# fixed amount determinted by the decomposition bit count and the encryption
# parameters.
# We now perform a third squaring and observe an even further compounded
# decrease in the noise budget. Again, relinearization does not consume the
# noise budget at this point by any observable amount, even with the largest
# possible decomposition bit count.
evaluator.square(encrypted)
print("Size after third squaring " + (str)(encrypted.size()))
print("Noise budget after third squaring: " +
(str)(decryptor.invariant_noise_budget(encrypted)) + " bits")
evaluator.relinearize(encrypted, ev_keys60)
print("Size after relinearization: " + (str)(encrypted.size()))
print("Noise budget after relinearizing (dbc = " +
(str)(ev_keys60.decomposition_bit_count()) + "): " +
(str)(decryptor.invariant_noise_budget(encrypted)) + " bits")
decryptor.decrypt(encrypted, plain2)
print("Eighth power: " + plain2.to_string())
def example_basics_i():
print_example_banner("Example: Basics I")
# In this example we demonstrate setting up encryption parameters and other
# relevant objects for performing simple computations on encrypted integers.
# SEAL uses the Fan-Vercauteren (FV) homomorphic encryption scheme. We refer to
# https://eprint.iacr.org/2012/144 for full details on how the FV scheme works.
# For better performance, SEAL implements the "FullRNS" optimization of FV, as
# described in https://eprint.iacr.org/2016/510.
# The first task is to set up an instance of the EncryptionParameters class.
# It is critical to understand how these different parameters behave, how they
# affect the encryption scheme, performance, and the security level. There are
# three encryption parameters that are necessary to set:
# - poly_modulus (polynomial modulus);
# - coeff_modulus ([ciphertext] coefficient modulus);
# - plain_modulus (plaintext modulus).
# A fourth parameter -- noise_standard_deviation -- has a default value of 3.19
# and should not be necessary to modify unless the user has a specific reason
# to and knows what they are doing.
# The encryption scheme implemented in SEAL cannot perform arbitrary computations
# on encrypted data. Instead, each ciphertext has a specific quantity called the
# `invariant noise budget' -- or `noise budget' for short -- measured in bits.
# The noise budget of a freshly encrypted ciphertext (initial noise budget) is
# determined by the encryption parameters. Homomorphic operations consume the
# noise budget at a rate also determined by the encryption parameters. In SEAL
# the two basic homomorphic operations are additions and multiplications, of
# which additions can generally be thought of as being nearly free in terms of
# noise budget consumption compared to multiplications. Since noise budget
# consumption is compounding in sequential multiplications, the most significant
# factor in choosing appropriate encryption parameters is the multiplicative
# depth of the arithmetic circuit that needs to be evaluated. Once the noise
# budget in a ciphertext reaches zero, it becomes too corrupted to be decrypted.
# Thus, it is essential to choose the parameters to be large enough to support
# the desired computation; otherwise the result is impossible to make sense of
# even with the secret key.
parms = EncryptionParameters()
# We first set the polynomial modulus. This must be a power-of-2 cyclotomic
# polynomial, i.e. a polynomial of the form "1x^(power-of-2) + 1". The polynomial
# modulus should be thought of mainly affecting the security level of the scheme;
# larger polynomial modulus makes the scheme more secure. At the same time, it
# makes ciphertext sizes larger, and consequently all operations slower.
# Recommended degrees for poly_modulus are 1024, 2048, 4096, 8192, 16384, 32768,
# but it is also possible to go beyond this. Since we perform only a very small
# computation in this example, it suffices to use a very small polynomial modulus
parms.set_poly_modulus("1x^2048 + 1")
# Next we choose the [ciphertext] coefficient modulus (coeff_modulus). The size
# of the coefficient modulus should be thought of as the most significant factor
# in determining the noise budget in a freshly encrypted ciphertext: bigger means
# more noise budget. Unfortunately, a larger coefficient modulus also lowers the
# security level of the scheme. Thus, if a large noise budget is required for
# complicated computations, a large coefficient modulus needs to be used, and the
# reduction in the security level must be countered by simultaneously increasing
# the polynomial modulus.
# To make parameter selection easier for the user, we have constructed sets of
# largest allowed coefficient moduli for 128-bit and 192-bit security levels
# for different choices of the polynomial modulus. These recommended parameters
# follow the Security white paper at http://HomomorphicEncryption.org. However,
# due to the complexity of this topic, we highly recommend the user to directly
# consult an expert in homomorphic encryption and RLWE-based encryption schemes
# to determine the security of their parameter choices.
# Our recommended values for the coefficient modulus can be easily accessed
# through the functions
# coeff_modulus_128bit(int)
# coeff_modulus_192bit(int)
# for 128-bit and 192-bit security levels. The integer parameter is the degree
# of the polynomial modulus.
# In SEAL the coefficient modulus is a positive composite number -- a product
# of distinct primes of size up to 60 bits. When we talk about the size of the
# coefficient modulus we mean the bit length of the product of the small primes.
# The small primes are represented by instances of the SmallModulus class; for
# example coeff_modulus_128bit(int) returns a vector of SmallModulus instances.
# It is possible for the user to select their own small primes. Since SEAL uses
# the Number Theoretic Transform (NTT) for polynomial multiplications modulo the
# factors of the coefficient modulus, the factors need to be prime numbers
# congruent to 1 modulo 2*degree(poly_modulus). We have generated a list of such
# prime numbers of various sizes, that the user can easily access through the
# functions
# small_mods_60bit(int)
# small_mods_50bit(int)
# small_mods_40bit(int)
# small_mods_30bit(int)
# each of which gives access to an array of primes of the denoted size. These
# primes are located in the source file util/globals.cpp.
# Performance is mainly affected by the size of the polynomial modulus, and the
# number of prime factors in the coefficient modulus. Thus, it is important to
# use as few factors in the coefficient modulus as possible.
# In this example we use the default coefficient modulus for a 128-bit security
# level. Concretely, this coefficient modulus consists of only one 56-bit prime
# factor: 0xfffffffff00001.
parms.set_coeff_modulus(seal.coeff_modulus_128(2048))
# The plaintext modulus can be any positive integer, even though here we take
# it to be a power of two. In fact, in many cases one might instead want it to
# be a prime number; we will see this in example_batching(). The plaintext
# modulus determines the size of the plaintext data type, but it also affects
# the noise budget in a freshly encrypted ciphertext, and the consumption of
# the noise budget in homomorphic multiplication. Thus, it is essential to try
# to keep the plaintext data type as small as possible for good performance.
# The noise budget in a freshly encrypted ciphertext is
# ~ log2(coeff_modulus/plain_modulus) (bits)
# and the noise budget consumption in a homomorphic multiplication is of the
# form log2(plain_modulus) + (other terms).
parms.set_plain_modulus(1 << 8)
# Now that all parameters are set, we are ready to construct a SEALContext
# object. This is a heavy class that checks the validity and properties of
# the parameters we just set, and performs and stores several important
# pre-computations.
context = SEALContext(parms)
# Print the parameters that we have chosen
print_parameters(context)
# Plaintexts in the FV scheme are polynomials with coefficients integers modulo
# plain_modulus. To encrypt for example integers instead, one can use an
# `encoding scheme' to represent the integers as such polynomials. SEAL comes
# with a few basic encoders:
# [IntegerEncoder]
# Given an integer base b, encodes integers as plaintext polynomials as follows.
# First, a base-b expansion of the integer is computed. This expansion uses
# a `balanced' set of representatives of integers modulo b as the coefficients.
# Namely, when b is odd the coefficients are integers between -(b-1)/2 and
# (b-1)/2. When b is even, the integers are between -b/2 and (b-1)/2, except
# when b is two and the usual binary expansion is used (coefficients 0 and 1).
# Decoding amounts to evaluating the polynomial at x=b. For example, if b=2,
# the integer
# 26 = 2^4 + 2^3 + 2^1
# is encoded as the polynomial 1x^4 + 1x^3 + 1x^1. When b=3,
# 26 = 3^3 - 3^0
# is encoded as the polynomial 1x^3 - 1. In memory polynomial coefficients are
# always stored as unsigned integers by storing their smallest non-negative
# representatives modulo plain_modulus. To create a base-b integer encoder,
# use the constructor IntegerEncoder(plain_modulus, b). If no b is given, b=2
# is used.
# [FractionalEncoder]
# The FractionalEncoder encodes fixed-precision rational numbers as follows.
# It expands the number in a given base b, possibly truncating an infinite
# fractional part to finite precision, e.g.
# 26.75 = 2^4 + 2^3 + 2^1 + 2^(-1) + 2^(-2)
# when b=2. For the sake of the example, suppose poly_modulus is 1x^1024 + 1.
# It then represents the integer part of the number in the same way as in
# IntegerEncoder (with b=2 here), and moves the fractional part instead to the
# highest degree part of the polynomial, but with signs of the coefficients
# changed. In this example we would represent 26.75 as the polynomial
# -1x^1023 - 1x^1022 + 1x^4 + 1x^3 + 1x^1.
# In memory the negative coefficients of the polynomial will be represented as
# their negatives modulo plain_modulus.
# [PolyCRTBuilder]
# If plain_modulus is a prime congruent to 1 modulo 2*degree(poly_modulus), the
# plaintext elements can be viewed as 2-by-(degree(poly_modulus) / 2) matrices
# with elements integers modulo plain_modulus. When a desired computation can be
# vectorized, using PolyCRTBuilder can result in massive performance improvements
# over naively encrypting and operating on each input number separately. Thus,
# in more complicated computations this is likely to be by far the most important
# and useful encoder. In example_batching() we show how to use and operate on
# encrypted matrix plaintexts.
# For performance reasons, in homomorphic encryption one typically wants to keep
# the plaintext data types as small as possible, which can make it challenging to
# prevent data type overflow in more complicated computations, especially when
# operating on rational numbers that have been scaled to integers. When using
# PolyCRTBuilder estimating whether an overflow occurs is a fairly standard task,
# as the matrix slots are integers modulo plain_modulus, and each slot is operated
# on independently of the others. When using IntegerEncoder or FractionalEncoder
# it is substantially more difficult to estimate when an overflow occurs in the
# plaintext, and choosing the plaintext modulus very carefully to be large enough
# is critical to avoid unexpected results. Specifically, one needs to estimate how
# large the largest coefficient in the polynomial view of all of the plaintext
# elements becomes, and choose the plaintext modulus to be larger than this value.
# SEAL comes with an automatic parameter selection tool that can help with this
# task, as is demonstrated in example_parameter_selection().
# Here we choose to create an IntegerEncoder with base b=2.
encoder = IntegerEncoder(context.plain_modulus())
# We are now ready to generate the secret and public keys. For this purpose we need
# an instance of the KeyGenerator class. Constructing a KeyGenerator automatically
# generates the public and secret key, which can then be read to local variables.
# To create a fresh pair of keys one can call KeyGenerator::generate() at any time.
keygen = KeyGenerator(context)
public_key = keygen.public_key()
secret_key = keygen.secret_key()
# To be able to encrypt, we need to construct an instance of Encryptor. Note that
# the Encryptor only requires the public key.
encryptor = Encryptor(context, public_key)
# Computations on the ciphertexts are performed with the Evaluator class.
evaluator = Evaluator(context)
# We will of course want to decrypt our results to verify that everything worked,
# so we need to also construct an instance of Decryptor. Note that the Decryptor
# requires the secret key.
decryptor = Decryptor(context, secret_key)
# We start by encoding two integers as plaintext polynomials.
value1 = 5
plain1 = encoder.encode(value1)
print("Encoded " + (str)(value1) + " as polynomial " + plain1.to_string() +
" (plain1)")
value2 = -7
plain2 = encoder.encode(value2)
print("Encoded " + (str)(value2) + " as polynomial " + plain2.to_string() +
" (plain2)")
# Encrypting the values is easy.
encrypted1 = Ciphertext()
encrypted2 = Ciphertext()
print("Encrypting plain1: ")
encryptor.encrypt(plain1, encrypted1)
print("Done (encrypted1)")
print("Encrypting plain2: ")
encryptor.encrypt(plain2, encrypted2)
print("Done (encrypted2)")
# To illustrate the concept of noise budget, we print the budgets in the fresh
# encryptions.
print("Noise budget in encrypted1: " +
(str)(decryptor.invariant_noise_budget(encrypted1)) + " bits")
print("Noise budget in encrypted2: " +
(str)(decryptor.invariant_noise_budget(encrypted2)) + " bits")
# As a simple example, we compute (-encrypted1 + encrypted2) * encrypted2.
# Negation is a unary operation.
evaluator.negate(encrypted1)
# Negation does not consume any noise budget.
print("Noise budget in -encrypted1: " +
(str)(decryptor.invariant_noise_budget(encrypted1)) + " bits")
# Addition can be done in-place (overwriting the first argument with the result,
# or alternatively a three-argument overload with a separate destination variable
# can be used. The in-place variants are always more efficient. Here we overwrite
# encrypted1 with the sum.
evaluator.add(encrypted1, encrypted2)
# It is instructive to think that addition sets the noise budget to the minimum
# of the input noise budgets. In this case both inputs had roughly the same
# budget going on, and the output (in encrypted1) has just slightly lower budget.
# Depending on probabilistic effects, the noise growth consumption may or may
# not be visible when measured in whole bits.
print("Noise budget in -encrypted1 + encrypted2: " +
(str)(decryptor.invariant_noise_budget(encrypted1)) + " bits")
# Finally multiply with encrypted2. Again, we use the in-place version of the
# function, overwriting encrypted1 with the product.
evaluator.multiply(encrypted1, encrypted2)
# Multiplication consumes a lot of noise budget. This is clearly seen in the
# print-out. The user can change the plain_modulus to see its effect on the
# rate of noise budget consumption.
print("Noise budget in (-encrypted1 + encrypted2) * encrypted2: " +
(str)(decryptor.invariant_noise_budget(encrypted1)) + " bits")
# Now we decrypt and decode our result.
plain_result = Plaintext()
print("Decrypting result: ")
decryptor.decrypt(encrypted1, plain_result)
print("Done")
# Print the result plaintext polynomial.
print("Plaintext polynomial: " + plain_result.to_string())
# Decode to obtain an integer result.
print("Decoded integer: " + (str)(encoder.decode_int32(plain_result)))
class encryption_handler(object):
"""
Methods:
set_encoder: sets specified encoder
encode_encrypt_2D: for encoding list of lists
decrypt_1D: for decoding list
Attributes:
params: seal encrpytion parameters object
batch: bool to batch operations
context: seal context object
secretkey: secret key kept on client side
publickey: public key for encryption
encoder: encoder for numerical inputs
"""
def __init__(
self,
security_level=128, #128 or 192 for now
poly_modulus_pwr2=12, # 11 through 15
coeff_modulus=None,
plain_modulus=2**8,
batch=False,
):
"""
security level: 128 or 192
poly_modulus_pwr2: 11,12,13,14,or 15 poly=x^(2^thisvariable)+1
will define our polynomial ring by Z[x]/poly. Larger
number means more security but longer computations.
coeff_modulus: default None, If set then security level
is ignored. This is important to set for batching as
it needs to be prime.
batch: default False, setting to true will design encryption
scheme to allow parallel predictions
"""
self.params = EncryptionParameters()
self.batch = batch
power = 2**poly_modulus_pwr2
self.params.set_poly_modulus(f"1x^{power} + 1")
if coeff_modulus != None:
st.write("Security level is ignored since coeff_modulus was set.")
self.params.set_coeff_modulus(coeff_modulus)
else:
if security_level == 128:
self.params.set_coeff_modulus(seal.coeff_modulus_128(power))
if security_level == 192:
self.params.set_coeff_modulus(seal.coeff_modulus_192(power))
try:
self.params.set_plain_modulus(plain_modulus)
except:
raise ValueError("There was a problem setting the plain modulus.")
try:
self._cont = SEALContext(self.params)
except Exception as e:
raise ValueError("There was a problem with your parameters.")
st.write(f"There was a problem with your parameters: {e}")
_keygen = KeyGenerator(self._cont)
self._secretkey = _keygen.secret_key()
self._publickey = _keygen.public_key()
@property
def secretkey(self):
return self._secretkey
@property
def publickey(self):
return self._publickey
@property
def context(self):
return self._cont
class FHECryptoEngine(CryptoEngine):
def __init__(self):
CryptoEngine.__init__(self, defs.ENC_MODE_FHE)
self.log_id = 'FHECryptoEngine'
self.encrypt_params = None
self.context = None
self.encryptor = None
self.evaluator = None
self.decryptor = None
return
def load_keys(self):
self.private_key = SecretKey()
self.private_key.load(defs.FN_FHE_PRIVATE_KEY)
self.public_key = PublicKey()
self.public_key.load(defs.FN_FHE_PUBLIC_KEY)
return True
def generate_keys(self):
if self.encrypt_params == None or \
self.context == None:
self.init_encrypt_params()
keygen = KeyGenerator(self.context)
# Generate the private key
self.private_key = keygen.secret_key()
self.private_key.save(defs.FN_FHE_PRIVATE_KEY)
# Generate the public key
self.public_key = keygen.public_key()
self.public_key.save(defs.FN_FHE_PUBLIC_KEY)
return True
def init_encrypt_params(self):
self.encrypt_params = EncryptionParameters()
self.encrypt_params.set_poly_modulus("1x^2048 + 1")
self.encrypt_params.set_coeff_modulus(seal.coeff_modulus_128(2048))
self.encrypt_params.set_plain_modulus(1 << 8)
self.context = SEALContext(self.encrypt_params)
return
def initialize(self, use_old_keys=False):
# Initialize encryption params
self.init_encrypt_params()
# Check if the public & private key files exist
if os.path.isfile(defs.FN_FHE_PUBLIC_KEY) and \
os.path.isfile(defs.FN_FHE_PRIVATE_KEY) and \
use_old_keys == True:
self.log("Keys already exist. Reusing them instead.")
if not self.load_keys():
self.log("Failed to load keys")
return False
else:
# If not, then attempt to generate new ones
if not self.generate_keys():
self.log("Failed to generate keys")
return False
# Setup the rest of the crypto engine
self.encryptor = Encryptor(self.context, self.public_key)
self.evaluator = Evaluator(self.context)
self.decryptor = Decryptor(self.context, self.private_key)
# Set the initialized flag
self.initialized = True
return True
def encrypt(self, data):
if not self.initialized:
self.log("Not initialized")
return False
# Setup the encoder
encoder = FractionalEncoder(self.context.plain_modulus(), self.context.poly_modulus(), 64, 32, 3)
# Create the array of encrypted data objects
encrypted_data = []
for raw_data in data:
encrypted_data.append(Ciphertext(self.encrypt_params))
self.encryptor.encrypt( encoder.encode(raw_data), encrypted_data[-1] )
# Pickle each Ciphertext, base64 encode it, and store it in the array
for i in range(0, len(encrypted_data)):
encrypted_data[i].save("fhe_enc.bin")
encrypted_data[i] = base64.b64encode( pickle.dumps(encrypted_data[i]) )
return encrypted_data
def evaluate(self, encrypted_data, lower_idx=0, higher_idx=-1):
result = Ciphertext()
# Setup the encoder
encoder = FractionalEncoder(self.context.plain_modulus(), self.context.poly_modulus(), 64, 32, 3)
# Unpack the data first
unpacked_data = []
for d in encrypted_data[lower_idx:higher_idx]:
unpacked_data.append(pickle.loads(base64.b64decode(d)))
# Perform operations
self.evaluator.add_many(unpacked_data, result)
div = encoder.encode(1/len(unpacked_data))
self.evaluator.multiply_plain(result, div)
# Pack the result
result = base64.b64encode( pickle.dumps(result) )
return result
def decrypt(self, raw_data):
if not self.initialized:
self.log("Not initialized")
return False
# Setup the encoder
encoder = FractionalEncoder(self.context.plain_modulus(), self.context.poly_modulus(), 64, 32, 3)
# Unpickle, base64 decode, and decrypt each ciphertext result
decrypted_data = []
for d in raw_data:
encrypted_data = pickle.loads( base64.b64decode(d) )
plain_data = Plaintext()
self.decryptor.decrypt(encrypted_data, plain_data)
decrypted_data.append( str(encoder.decode(plain_data)) )
return decrypted_data