def update(self, enabled, CS, frame, actuators, cruise_cancel, hud_alert,
left_line, right_line, left_lane_depart, right_lane_depart):
""" Controls thread """
# Send CAN commands.
can_sends = []
### STEER ###
acc_active = bool(CS.out.cruiseState.enabled)
lkas_hud_msg = CS.lkas_hud_msg
lkas_hud_info_msg = CS.lkas_hud_info_msg
apply_angle = actuators.steerAngle
steer_hud_alert = 1 if hud_alert == VisualAlert.steerRequired else 0
if enabled:
# # windup slower
if self.last_angle * apply_angle > 0. and abs(apply_angle) > abs(
self.last_angle):
angle_rate_lim = interp(CS.out.vEgo, ANGLE_DELTA_BP,
ANGLE_DELTA_V)
else:
angle_rate_lim = interp(CS.out.vEgo, ANGLE_DELTA_BP,
ANGLE_DELTA_VU)
apply_angle = clip(apply_angle, self.last_angle - angle_rate_lim,
self.last_angle + angle_rate_lim)
# Max torque from driver before EPS will give up and not apply torque
if not bool(CS.out.steeringPressed):
self.lkas_max_torque = LKAS_MAX_TORQUE
else:
# Scale max torque based on how much torque the driver is applying to the wheel
self.lkas_max_torque = max(
0, LKAS_MAX_TORQUE - 0.4 * abs(CS.out.steeringTorque))
else:
apply_angle = CS.out.steeringAngle
self.lkas_max_torque = 0
self.last_angle = apply_angle
if not enabled and acc_active:
# send acc cancel cmd if drive is disabled but pcm is still on, or if the system can't be activated
cruise_cancel = 1
if self.CP.carFingerprint == CAR.XTRAIL and cruise_cancel:
can_sends.append(
nissancan.create_acc_cancel_cmd(self.packer,
CS.cruise_throttle_msg, frame))
# TODO: Find better way to cancel!
# For some reason spamming the cancel button is unreliable on the Leaf
# We now cancel by making propilot think the seatbelt is unlatched,
# this generates a beep and a warning message every time you disengage
if self.CP.carFingerprint == CAR.LEAF and frame % 2 == 0:
can_sends.append(
nissancan.create_cancel_msg(self.packer, CS.cancel_msg,
cruise_cancel))
can_sends.append(
nissancan.create_steering_control(self.packer,
self.car_fingerprint,
apply_angle, frame, enabled,
self.lkas_max_torque))
if frame % 2 == 0:
can_sends.append(
nissancan.create_lkas_hud_msg(self.packer, lkas_hud_msg,
enabled, left_line, right_line,
left_lane_depart,
right_lane_depart))
if frame % 50 == 0:
can_sends.append(
nissancan.create_lkas_hud_info_msg(self.packer,
lkas_hud_info_msg,
steer_hud_alert))
return can_sends
def update(self, enabled, CS, frame, actuators, cruise_cancel, hud_alert,
left_line, right_line, left_lane_depart, right_lane_depart):
""" Controls thread """
# Send CAN commands.
can_sends = []
### STEER ###
acc_active = bool(CS.out.cruiseState.enabled)
cruise_throttle_msg = CS.cruise_throttle_msg
lkas_hud_msg = CS.lkas_hud_msg
lkas_hud_info_msg = CS.lkas_hud_info_msg
apply_angle = actuators.steerAngle
steer_hud_alert = 1 if hud_alert == VisualAlert.steerRequired else 0
if enabled:
# # windup slower
if self.last_angle * apply_angle > 0. and abs(apply_angle) > abs(
self.last_angle):
angle_rate_lim = interp(CS.out.vEgo, ANGLE_DELTA_BP,
ANGLE_DELTA_V)
else:
angle_rate_lim = interp(CS.out.vEgo, ANGLE_DELTA_BP,
ANGLE_DELTA_VU)
apply_angle = clip(apply_angle, self.last_angle - angle_rate_lim,
self.last_angle + angle_rate_lim)
# steer angle
angle_lim = interp(CS.out.vEgo, ANGLE_MAX_BP, ANGLE_MAX_V)
apply_angle = clip(apply_angle, -angle_lim, angle_lim)
# Max torque from driver before EPS will give up and not apply torque
if not bool(CS.out.steeringPressed):
self.lkas_max_torque = LKAS_MAX_TORQUE
else:
# Scale max torque based on how much torque the driver is applying to the wheel
self.lkas_max_torque = max(
0, LKAS_MAX_TORQUE - 0.4 * abs(CS.out.steeringTorque))
else:
apply_angle = CS.out.steeringAngle
self.lkas_max_torque = 0
self.last_angle = apply_angle
if not enabled and acc_active:
# send acc cancel cmd if drive is disabled but pcm is still on, or if the system can't be activated
cruise_cancel = 1
if cruise_cancel:
can_sends.append(
nissancan.create_acc_cancel_cmd(self.packer,
cruise_throttle_msg, frame))
can_sends.append(
nissancan.create_steering_control(self.packer,
self.car_fingerprint,
apply_angle, frame, acc_active,
self.lkas_max_torque))
if frame % 2 == 0:
can_sends.append(
nissancan.create_lkas_hud_msg(self.packer, lkas_hud_msg,
enabled, left_line, right_line,
left_lane_depart,
right_lane_depart))
if frame % 50 == 0:
can_sends.append(
nissancan.create_lkas_hud_info_msg(self.packer,
lkas_hud_info_msg,
steer_hud_alert))
return can_sends
def update(self, c, CS, frame, actuators, cruise_cancel, hud_alert,
left_line, right_line, left_lane_depart, right_lane_depart):
can_sends = []
### STEER ###
lkas_hud_msg = CS.lkas_hud_msg
lkas_hud_info_msg = CS.lkas_hud_info_msg
apply_angle = actuators.steeringAngleDeg
steer_hud_alert = 1 if hud_alert in (VisualAlert.steerRequired,
VisualAlert.ldw) else 0
if c.latActive:
# # windup slower
if self.last_angle * apply_angle > 0. and abs(apply_angle) > abs(
self.last_angle):
angle_rate_lim = interp(CS.out.vEgo,
CarControllerParams.ANGLE_DELTA_BP,
CarControllerParams.ANGLE_DELTA_V)
else:
angle_rate_lim = interp(CS.out.vEgo,
CarControllerParams.ANGLE_DELTA_BP,
CarControllerParams.ANGLE_DELTA_VU)
apply_angle = clip(apply_angle, self.last_angle - angle_rate_lim,
self.last_angle + angle_rate_lim)
# Max torque from driver before EPS will give up and not apply torque
if not bool(CS.out.steeringPressed):
self.lkas_max_torque = CarControllerParams.LKAS_MAX_TORQUE
else:
# Scale max torque based on how much torque the driver is applying to the wheel
self.lkas_max_torque = max(
# Scale max torque down to half LKAX_MAX_TORQUE as a minimum
CarControllerParams.LKAS_MAX_TORQUE * 0.5,
# Start scaling torque at STEER_THRESHOLD
CarControllerParams.LKAS_MAX_TORQUE - 0.6 * max(
0,
abs(CS.out.steeringTorque) -
CarControllerParams.STEER_THRESHOLD))
else:
apply_angle = CS.out.steeringAngleDeg
self.lkas_max_torque = 0
self.last_angle = apply_angle
if self.CP.carFingerprint in (CAR.ROGUE, CAR.XTRAIL,
CAR.ALTIMA) and cruise_cancel:
can_sends.append(
nissancan.create_acc_cancel_cmd(self.packer,
self.car_fingerprint,
CS.cruise_throttle_msg, frame))
# TODO: Find better way to cancel!
# For some reason spamming the cancel button is unreliable on the Leaf
# We now cancel by making propilot think the seatbelt is unlatched,
# this generates a beep and a warning message every time you disengage
if self.CP.carFingerprint in (CAR.LEAF,
CAR.LEAF_IC) and frame % 2 == 0:
can_sends.append(
nissancan.create_cancel_msg(self.packer, CS.cancel_msg,
cruise_cancel))
can_sends.append(
nissancan.create_steering_control(self.packer, apply_angle, frame,
c.enabled, self.lkas_max_torque))
if lkas_hud_msg and lkas_hud_info_msg:
if frame % 2 == 0:
can_sends.append(
nissancan.create_lkas_hud_msg(self.packer, lkas_hud_msg,
c.enabled, left_line,
right_line, left_lane_depart,
right_lane_depart))
if frame % 50 == 0:
can_sends.append(
nissancan.create_lkas_hud_info_msg(self.packer,
lkas_hud_info_msg,
steer_hud_alert))
new_actuators = actuators.copy()
new_actuators.steeringAngleDeg = apply_angle
return new_actuators, can_sends
def update(self, enabled, CS, frame, actuators, cruise_cancel, hud_alert,
left_line, right_line, left_lane_depart, right_lane_depart,
dragonconf):
""" Controls thread """
# Send CAN commands.
can_sends = []
### STEER ###
acc_active = bool(CS.out.cruiseState.enabled)
lkas_hud_msg = CS.lkas_hud_msg
lkas_hud_info_msg = CS.lkas_hud_info_msg
apply_angle = actuators.steeringAngleDeg
steer_hud_alert = 1 if hud_alert in [
VisualAlert.steerRequired, VisualAlert.ldw
] else 0
if enabled:
# # windup slower
if self.last_angle * apply_angle > 0. and abs(apply_angle) > abs(
self.last_angle):
angle_rate_lim = interp(CS.out.vEgo,
CarControllerParams.ANGLE_DELTA_BP,
CarControllerParams.ANGLE_DELTA_V)
else:
angle_rate_lim = interp(CS.out.vEgo,
CarControllerParams.ANGLE_DELTA_BP,
CarControllerParams.ANGLE_DELTA_VU)
apply_angle = clip(apply_angle, self.last_angle - angle_rate_lim,
self.last_angle + angle_rate_lim)
# Max torque from driver before EPS will give up and not apply torque
if not bool(CS.out.steeringPressed):
self.lkas_max_torque = CarControllerParams.LKAS_MAX_TORQUE
else:
# Scale max torque based on how much torque the driver is applying to the wheel
self.lkas_max_torque = max(
# Scale max torque down to half LKAX_MAX_TORQUE as a minimum
CarControllerParams.LKAS_MAX_TORQUE * 0.5,
# Start scaling torque at STEER_THRESHOLD
CarControllerParams.LKAS_MAX_TORQUE - 0.6 * max(
0,
abs(CS.out.steeringTorque) -
CarControllerParams.STEER_THRESHOLD))
else:
apply_angle = CS.out.steeringAngleDeg
self.lkas_max_torque = 0
# dp
blinker_on = CS.out.leftBlinker or CS.out.rightBlinker
if not enabled:
self.blinker_end_frame = 0
if self.last_blinker_on and not blinker_on:
self.blinker_end_frame = frame + dragonconf.dpSignalOffDelay
apply_angle = common_controller_ctrl(
enabled, dragonconf, blinker_on or frame < self.blinker_end_frame,
apply_angle, CS.out.vEgo)
self.last_blinker_on = blinker_on
self.last_angle = apply_angle
if not enabled and acc_active:
# send acc cancel cmd if drive is disabled but pcm is still on, or if the system can't be activated
cruise_cancel = 1
if self.CP.carFingerprint in [CAR.ROGUE, CAR.XTRAIL, CAR.ALTIMA
] and cruise_cancel:
can_sends.append(
nissancan.create_acc_cancel_cmd(self.packer,
self.car_fingerprint,
CS.cruise_throttle_msg, frame))
# TODO: Find better way to cancel!
# For some reason spamming the cancel button is unreliable on the Leaf
# We now cancel by making propilot think the seatbelt is unlatched,
# this generates a beep and a warning message every time you disengage
if self.CP.carFingerprint in [CAR.LEAF, CAR.LEAF_IC
] and frame % 2 == 0:
can_sends.append(
nissancan.create_cancel_msg(self.packer, CS.cancel_msg,
cruise_cancel))
can_sends.append(
nissancan.create_steering_control(self.packer, apply_angle, frame,
enabled, self.lkas_max_torque))
if lkas_hud_msg and lkas_hud_info_msg:
if frame % 2 == 0:
can_sends.append(
nissancan.create_lkas_hud_msg(self.packer, lkas_hud_msg,
enabled, left_line,
right_line, left_lane_depart,
right_lane_depart))
if frame % 50 == 0:
can_sends.append(
nissancan.create_lkas_hud_info_msg(self.packer,
lkas_hud_info_msg,
steer_hud_alert))
return can_sends
