def submit_numeric_value(self):
number = float(self.numeric_value_spinbox.get())
path = self.file_combobox.get()
option = get.option_names_in_file(path)[
self.select_setting_combobox.current()]
value = get.possible_value_by_number(
path, option, self.select_value_combobox.current())
diff_from_step = check.diff_to_step(value['min'], value['max'],
value['step'], number)
if value['max'] != None and value['max'] != '' and number > float(
value['max']):
tk.messagebox.showwarning(title='Out of range',
message="Number is bigger than max")
elif value['min'] != None and value['min'] != '' and number < float(
value['min']):
tk.messagebox.showwarning(title='Out of range',
message="Number is less than min")
elif value['step'] != None and value[
'step'] != '' and diff_from_step != 0:
tk.messagebox.showwarning(
title='Out of range',
message='Number fails the step constraint by ' +
str(diff_from_step))
else:
response = set.option_value(path, option, number)
if response == 200:
self.switch_to_before_set_value()
elif response == 701:
tk.messagebox.showwarning(title="Error", message="701 Error")
def submit_generic_value(self):
value = self.generic_value_entery.get()
check_value = check.general_value(value)
if check_value == 700:
tk.messagebox.showwarning(title='Bad Input',
message="Value must not contain ','")
elif check_value == 701:
tk.messagebox.showwarning(title='Bad Input',
message="Error: Value includes new line")
elif check_value != 200:
tk.messagebox.showwarning(title="Unspecified Error",
message="Unspecified Error")
else:
path = self.file_combobox.get()
option = get.option_names_in_file(path)[
self.select_setting_combobox.current()]
response = set.option_value(path, option, value)
if response == 200:
self.switch_to_before_set_value()
elif response == 701:
tk.messagebox.showwarning(title="Error", message="701 Error")
def switch_to_edit_file(self):
self.edit_option_frame.pack_forget()
self.new_option_frame.pack_forget()
self.new_file_frame.pack_forget()
self.main_frame.pack_forget()
self.file_description_frame.pack_forget()
file_description = get.file_description(self.current_path)
if file_description != None:
file_description = file_description.replace('\n', ' ')
file_description = textwrap.fill(file_description, width=80)
self.edit_file_description_label.configure(text=file_description)
options_list = get.option_names_in_file(self.current_path)
if options_list == []:
self.edit_file_list_combobox.config(state="disabled")
self.edit_file_edit_button.config(state="disabled")
self.edit_file_remove_button.config(state="disabled")
else:
self.edit_file_list_combobox.config(state="normal")
self.edit_file_edit_button.config(state="normal")
self.edit_file_remove_button.config(state="normal")
self.edit_file_list_combobox.configure(values=options_list)
self.edit_file_list_combobox.current(0)
self.edit_file_frame.pack(side='top')
def switch_to_possible_values(self):
path = self.file_combobox.get()
option = get.option_names_in_file(path)[
self.select_setting_combobox.current()]
self.possible_values_current_label.configure(
text=self.current_value_part_1 +
extract.get_value(path, option)['Value'])
self.possible_values = []
self.inside_file_frame.pack_forget()
if self.has_dot_xml:
i = 1
for value in get.option_values(path, option):
comment = get.possible_value_by_number(path, option,
i - 1)['comment']
if comment == None:
comment = ''
else:
comment = ': ' + comment
self.possible_values.append(value + comment)
i += 1
self.possible_values.append('Manual Value')
self.select_value_combobox.configure(values=self.possible_values)
self.select_value_combobox.current(0)
self.possible_values_frame.pack(side='top')
else:
self.generic_value_entery.delete(0, 'end')
self.generic_value_frame.pack(side='top')
def select_possible_value_event(self):
self.possible_values_frame.pack_forget()
if self.select_value_combobox.current() == len(
self.possible_values) - 1:
self.generic_value_entery.delete(0, 'end')
self.generic_value_frame.pack(side='top')
else:
path = self.file_combobox.get()
option = get.option_names_in_file(path)[
self.select_setting_combobox.current()]
value = get.possible_value_by_number(
path, option, self.select_value_combobox.current())
if 'min' in value: # Check if value is ranged
self.numeric_value_spinbox.delete(0, 'end')
min = max = step = initial = 0
style = ''
if value['min'] == None or value['min'] == '':
min = -sys.maxsize
else:
initial = min = float(value['min'])
if value['max'] == None or value['max'] == '':
max = sys.maxsize
else:
max = float(value['max'])
if value['step'] == None or value['step'] == '':
step = 1
else:
step = float(value['step'])
style = '% ' + str(len(str(step).split('.')[1])) + 'f'
self.numeric_value_spinbox.configure(from_=min,
to=max,
format=style,
increment=step)
self.numeric_value_spinbox.set(initial)
self.numeric_value_frame.pack(side='top')
elif 'name' in value: # Value is a single choice
response = set.option_value(path, option, value['name'])
if response == 200:
self.switch_to_before_set_value()
elif response == 701:
tk.messagebox.showwarning(title="Error",
message="701 Error")
def switch_to_inside_file(self):
self.possible_values_frame.pack_forget()
path = self.file_combobox.get()
option_list = get.option_names_in_file(path)
if len(option_list) == 0:
tk.messagebox.showwarning(title='No options',
message='This file has no options!')
else:
if os.path.isfile(path + '.xml'):
self.has_dot_xml = True
file_description = get.file_description(path)
if file_description != None:
file_description = self.file_description_part_1 + file_description
file_description = file_description.replace('\n', ' ')
file_description = textwrap.fill(file_description,
width=75)
else:
file_description = ''
self.file_description_label.configure(text=file_description)
else:
self.file_description_label.configure(
text=
'Caution: .setting.xml file missing, no additional data is provided for this setting!'
)
self.frame1.pack_forget()
for i in range(len(option_list)):
comment = get.option_comment(path, option_list[i])
if comment != None:
option_list[i] = option_list[i] + ': ' + comment
self.select_setting_combobox.configure(values=option_list)
self.select_setting_combobox.current(0)
self.inside_file_frame.pack(side='top')
def on_option_remove_event(self):
response = tk.messagebox.askquestion(
'Confirmation', 'Are you sure you want delete this option?')
if response == 'yes':
response = common.remove_option_from_file(
self.current_path, self.edit_file_list_combobox.get())
option_list = get.option_names_in_file(self.current_path)
if option_list == []:
self.edit_file_list_combobox.config(state="disabled")
self.edit_file_edit_button.config(state="disabled")
self.edit_file_remove_button.config(state="disabled")
else:
self.edit_file_list_combobox.config(state="normal")
self.edit_file_edit_button.config(state="normal")
self.edit_file_remove_button.config(state="normal")
self.edit_file_list_combobox.configure(values=option_list)
self.edit_file_list_combobox.current(0)
print(str(i+1) + '. ' + approved_dot_setting_list[i])
choice = input('\nEnter the number of file you want to edit (1 to ' + str(len(approved_dot_setting_list)) + ", 0 to exit): ").strip()
if choice == '0' or choice == '':
break
elif choice.isdecimal():
choice = int(choice)
if choice < 1 or choice > len(approved_dot_setting_list):
print('\nNumber is not in range!\n')
else:
path = approved_dot_setting_list[choice-1]
option_list = get.option_names_in_file(path)
if len(option_list) == 0:
print('\nThis file has no options\n')
continue
has_dot_xml = True
if not os.path.isfile(path + '.xml'):
has_dot_xml = False
print('\nCaution: .setting.xml file missing, no additional data is provided for this setting')
description = get.file_description(path)
if description != None:
print('\nSetting file description: ' + description + '\n')
def edit(path_to_dot_setting):
path = path_to_dot_setting
print('\nThis file contains these options: ' +
str(get.option_names_in_file(path)))
while True:
choice = input(
"\nEnter '1' to edit a option\nEnter '2' to add a new option\n"
"Enter '3' to remove a option\nEnter '4' to see the list of options in current file\n"
"Enter '5' to set description for this file\nEnter 0 to get back\n\n->"
).strip()
if choice == '0' or choice == '':
break
elif choice == '1':
while True:
name = input('Enter the option name: ').strip()
name_check = check.option_name(name)
if name_check == 701:
print("\nName must not contain ':'\n")
elif name_check == 702:
print("\nName must not contain ','\n")
elif name_check == 700:
break
elif name_check == 703:
print("\nName cannot start with '#'\n")
elif name_check == 704:
print("\nError: Name includes new line\n")
elif name_check != 200:
print("\nUnspecified Error\n")
elif not check.option_exists_in_file(path, name):
print('\nOption not found!\n')
else:
while True:
choice = input(
"\nEnter '1' to change option name\nEnter '2' to change default value\n"
"Enter '3' to change comment\nEnter '4' to manage possible values for this option\n"
"Enter 0 to get back\n\n->").strip()
if choice == '0' or choice == '':
break
elif choice == '1':
while True:
new_name = input(
'Enter new option name: ').strip()
name_check = check.option_name(new_name)
if name_check == 701:
print("\nName must not contain ':'\n")
elif name_check == 702:
print("\nName must not contain ','\n")
elif name_check == 703:
print("\nName cannot start with '#'\n")
elif name_check == 704:
print("\nError: Name includes new line\n")
elif name_check == 700:
break
elif name_check != 200:
print("\nUnspecified Error\n")
elif check.option_exists_in_file(
path, new_name):
print(
'\nThis option name already exists!\n')
else:
response = common.change_option_name(
path, name, new_name)
if response == 200:
print('\nName changed successfully.\n')
elif response == 201:
print(
'\nName changed successfully.\nCaution: Option name was not found in .setting.xml file, file could be corrupted\n'
)
break
elif choice == '2':
while True:
value = input('Enter default value: ').strip()
check_value = check.general_value(value)
if check_value == 700:
print("\nValue must not contain ','\n")
elif check_value == 701:
print("\nError: Value includes new line\n")
elif check_value != 200:
print("\nUnspecified Error\n")
elif value == '':
break
else:
response = set.default(path, name, value)
if response == 200:
print(
'\nDefault value set successfully.\n'
)
elif response == 201:
print(
'\nDefault value set successfully.\nCaution: Option name was not found in .setting.xml file, file could be corrupted\n'
)
break
elif choice == '3':
while True:
comment = input('Enter the comment: ').strip()
if '\n' in comment:
print(
"\nError: Comment includes new line\n")
elif comment == '':
break
else:
response = set.option_comment(
path, name, comment)
if response == 200:
print('\nComment set successfully.\n')
elif response == 201:
print(
'\nComment set successfully.\nCaution: Option name was not found in .setting.xml file, file could be corrupted\n'
)
break
elif choice == '4':
show_option_values(path, name)
while True:
choice = input(
"\nEnter '1' to add a value\nEnter '2' to edit a value\n"
"Enter '3' to remove a value\nEnter '4' to see a list of current values\n"
"Enter 0 to get back\n\n->").strip()
if choice == '0' or choice == '':
break
elif choice == '1':
while True:
choice = input(
"\nEnter '1' for simple value\nEnter '2' for number range value\n"
"Enter 0 to get back\n\n->")
if choice == '0' or choice == '':
break
elif choice == '1':
while True:
value = input(
'Enter the value: ').strip(
)
check_value = check.general_value(
value)
if check_value == 700:
print(
"\nValue must not contain ','\n"
)
elif check_value == 701:
print(
"\nError: Value includes new line\n"
)
elif check_value != 200:
print(
"\nUnspecified Error\n"
)
elif value == '':
break
elif check.option_simple_value_exists(
path, name, value):
print(
'\nThis value already exists!\n'
)
else:
while True:
comment = input(
'Enter the single line comment for option: '
).strip()
if '\n' in comment:
print(
"\nError: Comment includes new line\n"
)
else:
response = common.add_simple_value(
path, name,
value, comment)
if response == 200:
print(
'\nValue added successfully\n'
)
else:
print(
'\nSome error occured\n'
)
break
break
elif choice == '2':
while True:
min = input(
'Enter the minimum (Enter nothing to skip): '
).strip()
if min == '':
break
try:
float(min)
break
except:
print(
'\n' + min +
' is not a number!\n')
while True:
max = input(
'Enter the maximum (Enter nothing to skip): '
).strip()
if max == '':
break
try:
float(max)
break
except:
print(
'\n' + max +
' is not a number!\n')
while True:
step = input(
'Enter the step (Enter nothing to skip): '
).strip()
if step == '':
break
try:
float(step)
break
except:
print(
'\n' + step +
' is not a number!\n')
if min == max == step == '':
continue
elif check.option_renage_value_exists(
path, name, min, max,
step):
print(
'\nThis range is already added!\n'
)
else:
while True:
comment = input(
'Enter the single line comment for option: '
).strip()
if '\n' in comment:
print(
"\nError: Comment includes new line\n"
)
else:
response = common.add_range_value(
path, name, min,
max, step, comment)
if response == 200:
print(
'\nRange added successfully\n'
)
else:
print(
'\nSome error occured\n'
)
break
else:
print('\nCommand not found!\n')
elif choice == '2':
number_of_values = len(
get.option_values(path, name))
if number_of_values == 0:
print('\nOption has no values\n')
else:
choice = input(
'\nEnter the number of value you want to edit (1 to '
+ str(number_of_values) +
'): ').strip()
if choice.isdecimal():
choice = int(choice)
if choice < 1 or choice > number_of_values:
print(
'\nNumber is not in range\n'
)
else:
while True:
action = input(
"\nEnter '1' set comment\nEnter '2' edit value\n"
"Enter 0 to get back\n\n->"
)
if action == '0' or action == '':
break
elif action == '1':
while True:
comment = input(
'Enter the single line comment for option: '
).strip()
if '\n' in comment:
print(
"\nError: Comment includes new line\n"
)
else:
response = common.set_value_comment_by_number(
path, name,
choice - 1,
comment)
if response == 200:
print(
'\nCommented is set\n'
)
else:
print(
'\nSome error occured\n'
)
break
elif action == '2':
value = get.possible_value_by_number(
path, name,
choice - 1)
if 'min' in value: #Check if value is ranged
while True:
action = input(
"\nEnter '1' to set min\nEnter '2' to set max\nEnter '3' to set step\n"
"Enter 0 to get back\n\n->"
).strip()
if action == '0' or action == '':
break
elif action == '1':
while True:
min = input(
'Enter the min (Enter nothing for empty): '
).strip(
)
if min != '':
try:
float(
min
)
except:
print(
'\n'
+
min
+
' is not a number!\n'
)
continue
if min == value[
'max'] == value[
'step'] == '':
print(
'\nCannot have min, max and step empty\n'
)
elif check.option_renage_value_exists(
path,
name,
min,
value[
'max'],
value[
'step']
):
print(
'\nThis range is already added!\n'
)
else:
response = common.set_ranged_possible_value_by_number(
path,
name,
choice
-
1,
min,
value[
'max'],
value[
'step']
)
if response == 200:
print(
'\nValue is set\n'
)
else:
print(
'\nSome error occured\n'
)
break
break
elif action == '2':
while True:
max = input(
'Enter the max (Enter nothing for empty): '
).strip(
)
if max != '':
try:
float(
max
)
except:
print(
'\n'
+
max
+
' is not a number!\n'
)
continue
if value['min'] == max == value[
'step'] == '':
print(
'\nCannot have min, max and step empty\n'
)
elif check.option_renage_value_exists(
path,
name,
value[
'min'],
max,
value[
'step']
):
print(
'\nThis range is already added!\n'
)
else:
response = common.set_ranged_possible_value_by_number(
path,
name,
choice
-
1,
value[
'min'],
max,
value[
'step']
)
if response == 200:
print(
'\nValue is set\n'
)
else:
print(
'\nSome error occured\n'
)
break
break
elif action == '3':
while True:
step = input(
'Enter the step (Enter nothing for empty): '
).strip(
)
if step != '':
try:
float(
step
)
except:
print(
'\n'
+
step
+
' is not a number!\n'
)
continue
if value['min'] == value[
'max'] == step == '':
print(
'\nCannot have min, max and step empty\n'
)
elif check.option_renage_value_exists(
path,
name,
value[
'min'],
value[
'max'],
step
):
print(
'\nThis range is already added!\n'
)
else:
response = common.set_ranged_possible_value_by_number(
path,
name,
choice
-
1,
value[
'min'],
value[
'max'],
step
)
if response == 200:
print(
'\nValue is set\n'
)
else:
print(
'\nSome error occured\n'
)
break
break
else:
print(
'\nCommand not found!\n'
)
elif 'name' in value:
while True:
value = input(
'Enter the new value: '
).strip()
check_value = check.general_value(
value)
if check_value == 700:
print(
"\nValue must not contain ','\n"
)
elif check_value == 701:
print(
"\nError: Value includes new line\n"
)
elif check_value != 200:
print(
"\nUnspecified Error\n"
)
elif value == '':
break
elif check.option_simple_value_exists(
path,
name,
value):
print(
'\nThis value already exists!\n'
)
else:
response = common.set_simple_possible_value_by_number(
path,
name,
choice
- 1,
value)
if response == 200:
print(
'\nName has changed\n'
)
else:
print(
'\nSome error occured\n'
)
break
break
else:
print(
'\nCommand not found!\n'
)
else:
print('\nInput must be a number\n')
elif choice == '3':
number_of_values = len(
get.option_values(path, name))
if number_of_values == 0:
print('\nOption has no values\n')
else:
choice = input(
'\nEnter the number of value you want to be removed (1 to '
+ str(number_of_values) +
'): ').strip()
if choice.isdecimal():
choice = int(choice)
if choice < 1 or choice > number_of_values:
print(
'\nNumber is not in range\n'
)
else:
common.remove_possible_value_by_number(
path, name, choice - 1)
print(
'\nValue removed successfully\n'
)
else:
print('\nInput must be a number\n')
elif choice == '4':
show_option_values(path, name)
else:
print('\nCommand not found!\n')
else:
print('\nCommand not found!\n')
break
elif choice == '2':
while True:
name = input('Enter the option name: ').strip()
name_check = check.option_name(name)
if name_check == 701:
print("\nName must not contain ':'\n")
elif name_check == 702:
print("\nName must not contain ','\n")
elif name_check == 700:
break
elif name_check == 703:
print("\nName cannot start with '#'\n")
elif name_check == 704:
print("\nError: Name includes new line\n")
elif name_check != 200:
print("\nUnspecified Error\n")
elif check.option_exists_in_file(path, name):
print('\nThis option name already exists!\n')
else:
while True:
comment = input(
'Enter the single line comment for option: '
).strip()
if '\n' in comment:
print("\nError: Comment includes new line\n")
else:
response = common.add_option_to_file(
path, name, comment)
if response == 200:
print('\nOption created successfully\n')
elif response == 201:
print(
'\nCaution: Option created successfully! Definition for option '
+ name +
' already exists in setting.xml file\n')
break
break
elif choice == '3':
while True:
name = input('Enter the option name: ').strip()
name_check = check.option_name(name)
if name_check == 701:
print("\nName must not contain ':'\n")
elif name_check == 702:
print("\nName must not contain ','\n")
elif name_check == 700:
break
elif name_check == 703:
print("\nName cannot start with '#'\n")
elif name_check == 704:
print("\nError: Name includes new line\n")
elif name_check != 200:
print("\nUnspecified Error\n")
elif not check.option_exists_in_file(path, name):
print('\nOption with this name does not exist!\n')
else:
response = common.remove_option_from_file(path, name)
if response == 200:
print('\nOption removed successfully\n')
elif response == 201:
print(
"\nCaution: Option removed successfully but Option '"
+ name + "' didn't exist in setting.xml file.\n"
"It causes no problem in removing but means that your .setting.xml was corrupted.\n"
)
break
elif choice == '4':
print('\nThis file contains these options: ' +
str(get.option_names_in_file(path)))
elif choice == '5':
description = cli.get_multiline_input(
'\nEnter any description you may have for this file')
if description != '':
set.file_description(path, description)
print('\nDescription changed successfully\n')
else:
print('\nCommand not found!\n')
def new_option_save_event(self):
error_list = ''
success_list = ''
new_name = self.new_option_name_entry.get()
name_check = check.option_name(new_name)
if name_check == 701:
error_list += "Option name must not contain ':'\n"
elif name_check == 702:
error_list += "Option name must not contain ','\n"
elif name_check == 703:
error_list += "Option name cannot start with '#'\n"
elif name_check == 704:
error_list += "Error: Option name includes new line\n"
elif name_check == 700:
error_list += 'Option name cannot be empty!\n'
elif name_check != 200:
error_list += 'Unspecified Option Name Error\n'
elif check.option_exists_in_file(self.current_path, new_name):
error_list += 'This option name already exists!\n'
else:
comment = self.new_option_comment_entry.get()
if '\n' in comment:
error_list += 'Error: Comment includes new line\n'
comment = ''
response = common.add_option_to_file(self.current_path, new_name,
comment)
if response == 200:
success_list += 'Option created successfully\n'
elif response == 201:
error_list += 'Caution: Option created successfully! Definition for option ' + new_name + ' already exists in setting.xml file\n'
options_list = get.option_names_in_file(self.current_path)
self.edit_file_list_combobox.config(state="normal")
self.edit_file_edit_button.config(state="normal")
self.edit_file_remove_button.config(state="normal")
self.edit_file_list_combobox.configure(values=options_list)
self.edit_file_list_combobox.current(len(options_list) - 1)
new_default = self.new_option_default_value_entry.get()
check_value = check.general_value(new_default)
if check_value == 700:
error_list += "Default must not contain ','\n"
elif check_value == 701:
error_list += "Error: Default includes new line\n"
elif check_value != 200:
error_list += 'Unspecified Default Error\n'
else:
response = set.default(self.current_path, new_name,
new_default)
if success_list != '':
tk.messagebox.showinfo(title='Created Successfully',
message=success_list)
if error_list != '':
tk.messagebox.showerror(title='Error', message=error_list)
if success_list != '':
self.switch_to_edit_option()