def setup(hass, config):
"""Set up the Haiku SenseME platform."""
from senseme import discover
from senseme import SenseMe
# discover Haiku with SenseME fans
devices = discover(config[DOMAIN][CONF_MAX_NUMBER_FANS], 8)
hubs = []
include_list = config[DOMAIN].get(CONF_INCLUDE)
exclude_list = config[DOMAIN].get(CONF_EXCLUDE)
if len(include_list) > 0:
# add only included fans
for device in devices:
# _LOGGER.warning("Discovered fan: '%s'." % (device.name))
for include in include_list:
if include['name'] == device.name:
# _LOGGER.warning("Match include fan: '%s'.", device.name)
newDevice = SenseMe(ip=device.ip,
name=device.name,
monitor_frequency=SENSEME_UPDATE_DELAY,
monitor=True)
hubs.append(
SenseMeHub(newDevice, include.get('friendly_name'),
include['has_light']))
friendly_name = include.get('friendly_name')
if not friendly_name:
friendly_name = device.name
# _LOGGER.info("Added included fan: '%s' as '%s' %s." %
# (device.name, friendly_name, "with light" if
# include['has_light'] else "without light"))
# make sure all included fans were discovered
for include in include_list:
discovered = False
for hub in hubs:
if include['name'] == hub.name:
discovered = True
break
if discovered == False:
_LOGGER.error("Included fan not found: '%s'." %
(include['name']))
else:
# add only not excluded fans
for device in devices:
# add only if NOT excluded
if device.name not in exclude_list:
newDevice = SenseMe(ip=device.ip,
name=device.name,
monitor_frequency=SENSEME_UPDATE_DELAY,
monitor=True)
hubs.append(SenseMeHub(newDevice, None, HAS_LIGHT_DEFAULT))
# _LOGGER.debug("Added not excluded fan: '%s', %s." %
# (device.name, "with light" if
# HAS_LIGHT_DEFAULT else "without light"))
# SenseME fan and light platforms use hub to communicate with the fan
hass.data[DATA_HUBS] = hubs
# Add fan and light platform
load_platform(hass, 'fan', DOMAIN, {}, config)
load_platform(hass, 'light', DOMAIN, {}, config)
return True
def discover_and_getall():
print("Discovering...")
devices = discover()
print("Discovered:")
for device in devices:
print(device, "\n", repr(device))
for device in devices:
results = device.send_raw("<%s;GETALL>" % device.name)
print(len(results), "result strings.")
for result in results:
print(result)
def discover_and_getall():
print('Discovering...')
devices = discover()
print('Discovered:')
for device in devices:
print(device, '\n', repr(device))
for device in devices:
results = device.send_raw('<%s;GETALL>' % device.name)
print(len(results), 'result strings.')
for result in results:
print(result)
def main():
# discover devices, returns list of SenseMe devices
devices = discover()
fan = devices[0]
- install senseme
- install flask
- copy the examples/flask_app.py and templates directory somewhere, or clone
the repo
- python3 SenseMe/examples/flask_app.py
- In a browser go to http://localhost:5000
This is intended as an example, it is not feature complete.
I would gladly take contributions to extend this from an example to a proper
interface. My preference, however, would probably be a hug interface.
"""
import flask
from senseme import discover
fan = discover()[0]
app = flask.Flask(__name__)
app.secret_key = "12839-hidf;safng1jjdsgaklgxzcvzxdsfa125asklvnke1pht32532r"
@app.route("/")
def index():
# return flask.send_from_directory('./static/', 'index.html')
flask.flash(str((fan.speed, fan.brightness)))
return flask.render_template("index.html")
# Light Functions
@app.route("/light/toggle")
def toggle_light():
def main():
"""A script that exposes all of the senseme commands as a CLI to enable scripting"""
fan = None
parser = optparse.OptionParser()
fan_group = optparse.OptionGroup(parser, "Commands specific to the fan")
addon_light_group = optparse.OptionGroup(
parser, "Commands specific to the add on light to the fan")
wall_controller_group = optparse.OptionGroup(
parser, "Commands specific to the wall controller")
device_group = optparse.OptionGroup(parser,
"Commands generic to senseme devices")
device_group.add_option("--ip", default=None, help="IP Address of Fan")
device_group.add_option(
"--name",
default=None,
help="Name of SenseMe Device as from the Haiku App")
device_group.add_option("--model",
default="FAN",
help="Model of the SenseMe device")
device_group.add_option(
"--get-beeper-sound",
default=None,
action="store_true",
help="Returns if the beeper sound is ON or OFF",
)
device_group.add_option("--set-beeper-sound",
default=None,
help="Sets beepersound to ON or OFF")
device_group.add_option(
"--get-device-time",
default=None,
action="store_true",
help="Returns the present time on the device",
)
device_group.add_option(
"--get-firmware-name",
default=None,
action="store_true",
help="Returns the name of the presently running firmware",
)
device_group.add_option(
"--get-firmware-version",
default=None,
action="store_true",
help="Returns the version of the presently running firmware",
)
device_group.add_option(
"--list-devices",
default=None,
action="store_true",
help=
"listens on the local network for Haiku devices and prints information about them.",
)
device_group.add_option(
"--get-led-indicators",
default=None,
action="store_true",
help="Returns if the indicator leds are ON or OFF",
)
device_group.add_option(
"--set-led-indicators",
default=None,
help="Sets if the indicator leds are ON or OFF",
)
device_group.add_option(
"--get-network-apstatus",
default=None,
action="store_true",
help="Returns if the wireless access point is enabled on the device",
)
device_group.add_option(
"--get-network-dhcp-state",
default=None,
action="store_true",
help="Returns if the device is running a local dhcp service",
)
device_group.add_option(
"--get-network-parameters",
default=None,
action="store_true",
help="Return a string of all network settings for the device",
)
device_group.add_option(
"--get-network-ssid",
default=None,
action="store_true",
help="Return the wireless SSID the device is connected to",
)
device_group.add_option(
"--get-network-token",
default=None,
action="store_true",
help="Return the network token of the device",
)
fan_group.add_option(
"--get-fanmode",
default=None,
action="store_true",
help="Returns if the light is ON or OFF",
)
fan_group.add_option("--set-fanmode",
default=None,
help="Sets the fan to ON or OFF")
fan_group.add_option(
"--toggle-fanmode",
default=None,
action="store_true",
help="Toggles the fan mode between ON or OFF",
)
fan_group.add_option(
"--get-height",
default=None,
action="store_true",
help="retrieve the height of the fan in centimeters",
)
fan_group.add_option(
"--set-height",
default=None,
type=int,
help="Sets the height of the fan in centimeters (ex. 10ft=304)",
)
fan_group.add_option(
"--get-speed",
default=None,
action="store_true",
help="retrieve the speed of the fan (0-7)",
)
fan_group.add_option("--set-speed",
default=None,
type="int",
help="set the speed of the fan (0-7)")
fan_group.add_option(
"--get-minspeed",
default=None,
action="store_true",
help="Returns the fan's minimum speed setting (0-7)",
)
fan_group.add_option(
"--get-maxspeed",
default=None,
action="store_true",
help="Returns the fan's maximum speed setting (0-7)",
)
fan_group.add_option(
"--get-room-fanspeed-limits",
default=None,
action="store_true",
help="Returns the fans min and max speeds for the room settings.",
)
fan_group.add_option(
"--set-room-fanspeed-limits",
default=None,
nargs=2,
dest="roomfanspeedlimits",
help="Sets the fans min and max speeds for the room settings. "
"This take 2 arguments min max with each being (0-7)",
)
fan_group.add_option(
"--decrease-fanspeed",
default=None,
action="store_true",
help="Decreases the speed of the fan by 1",
)
fan_group.add_option(
"--increase-fanspeed",
default=None,
action="store_true",
help="increases the speed of the fan by 1",
)
fan_group.add_option(
"--get-learnmode",
default=None,
action="store_true",
help="Returns if the fan's learning mode is ON or OFF",
)
fan_group.add_option(
"--set-learnmode",
default=None,
help="Sets if the fan's learning mode is ON or OFF",
)
fan_group.add_option(
"--get-learnmode-zerotemp",
default=None,
action="store_true",
help="Returns the temp in fahrenheit where learning mode "
"auto-shuts off the fan (valid temps 50-90)",
)
fan_group.add_option(
"--set-learnmode-zerotemp",
default=None,
type="int",
help="Sets the temp in fahrenheit where learning mode "
"auto-shuts off the fan (valid temps 50-90)",
)
fan_group.add_option(
"--get-learnmode-minspeed",
default=None,
action="store_true",
help="Returns the minimum speed setting for learning mode (0-7)",
)
fan_group.add_option(
"--set-learnmode-minspeed",
default=None,
type="int",
help="Sets the minimum speed setting for learning mode (0-7)",
)
fan_group.add_option(
"--get-learnmode-maxspeed",
default=None,
action="store_true",
help="Sets the maximum speed setting for learning mode (0-7)",
)
fan_group.add_option(
"--set-learnmode-maxspeed",
default=None,
type="int",
help="Sets the maximum speed setting for learning mode (0-7)",
)
fan_group.add_option(
"--get-smartsleep-mode",
default=None,
action="store_true",
help="Returns if the fan's smartsleep mode is ON or OFF",
)
fan_group.add_option(
"--set-smartsleep-mode",
default=None,
help="Sets if the fan's smartsleep mode is ON or OFF",
)
fan_group.add_option(
"--get-smartsleep-idealtemp",
default=None,
action="store_true",
help="retrieve the smart sleep mode ideal temp in fahrenheit",
)
fan_group.add_option(
"--set-smartsleep-idealtemp",
default=None,
type="int",
help=
"Sets the smart sleep mode ideal temp in fahrenheit (valid temps 50-90)",
)
fan_group.add_option(
"--get-smartsleep-minspeed",
default=None,
action="store_true",
help=
"retrieve the minimum the speed of the fan (0-7) when in smartsleep mode",
)
fan_group.add_option(
"--set-smartsleep-minspeed",
default=None,
type="int",
help="set the minimum speed of the fan (0-7) when in smartsleep mode",
)
fan_group.add_option(
"--get-smartsleep-maxspeed",
default=None,
action="store_true",
help=
"retrieve the maximum the speed of the fan (0-7) when in smartsleep mode",
)
fan_group.add_option(
"--set-smartsleep-maxspeed",
default=None,
type="int",
help="set the maximum speed of the fan (0-7) when in smartsleep mode",
)
fan_group.add_option(
"--get-smartsleep-wakeup-brightness",
default=None,
action="store_true",
help="get the add-on light brightness in wakeup mode "
"(0-16) 0=off, 1-16 are the brightness levels",
)
fan_group.add_option(
"--set-smartsleep-wakeup-brightness",
default=None,
type="int",
help="set the add-on light brightness in wakeup mode "
"(0-16) 0=off, 1-16 are the brightness levels",
)
fan_group.add_option(
"--get-fan-direction",
default=None,
action="store_true",
help="Gets if the fan blades are spinning forward or reverse.",
)
fan_group.add_option(
"--set-fan-direction",
default=None,
help=
"Sets if the fan blades are spinning forward or reverse. DO NOT DO WITH BLADES SPINNING",
)
fan_group.add_option(
"--get-fan-motionmode",
default=None,
action="store_true",
help="Returns if the fan's motion sensor is ON or OFF",
)
fan_group.add_option(
"--set-fan-motionmode",
default=None,
help="Sets if the fan's motion sensor is ON or OFF",
)
fan_group.add_option(
"--get-motionmode-mintimer",
default=None,
action="store_true",
help="Returns the minimum number of minutes the timer "
"can be set to auto-shutoff the fan and/or add-on light",
)
fan_group.add_option(
"--get-motionmode-maxtimer",
default=None,
action="store_true",
help="Returns the maximum number of minutes the timer "
"can be set to auto-shutoff the fan and/or add-on light",
)
fan_group.add_option(
"--get-motionmode-currenttimer",
default=None,
action="store_true",
help="Returns the current number of minutes the timer "
"can be set to auto-shutoff the fan and/or add-on light",
)
fan_group.add_option(
"--set-motionmode-timer",
default=None,
help="Sets the the number of minutes the timer "
"will run prior to auto-shutoff of the fan and/or add-on light",
)
fan_group.add_option(
"--get-motionmode-occupied-status",
default=None,
action="store_true",
help="Returns if the room is presently occupied or "
"unoccupied based on the built in motion sensor.",
)
fan_group.add_option(
"--get-wintermode",
default=None,
action="store_true",
help="Returns if the wintermode state is ON or OFF",
)
fan_group.add_option("--set-wintermode",
default=None,
help="Sets wintermode to ON or OFF")
fan_group.add_option(
"--get-smartmode",
default=None,
action="store_true",
help="Returns if the smartmode is off, cooling or heating",
)
fan_group.add_option(
"--set-smartmode",
default=None,
help="Sets smart mode to off,cooling, or heating",
)
fan_group.add_option(
"--get-whooshmode",
default=None,
action="store_true",
help="Returns of whoosh mode is ON or OFF",
)
fan_group.add_option("--set-whooshmode",
default=None,
help="Sets whoosh mode to ON or OFF")
addon_light_group.add_option(
"--get-brightness",
default=None,
action="store_true",
help="retrieve the brightness of the fan (0-16)",
)
addon_light_group.add_option(
"--set-brightness",
default=None,
type="int",
help="Sets the brightness of the light on the fan (0-16)",
)
addon_light_group.add_option(
"--get-min-brightness",
default=None,
action="store_true",
help="Returns the add-on lights minimum brightness setting (0-16)",
)
addon_light_group.add_option(
"--get-max-brightness",
default=None,
action="store_true",
help="Returns the add-on lights maximum brightness setting (0-16)",
)
addon_light_group.add_option(
"--get-room-brightness-limits",
default=None,
action="store_true",
help=
"Returns the add-on lights min and max brightness for the room settings",
)
addon_light_group.add_option(
"--set-room-brightness-limits",
default=None,
type="int",
nargs=2,
dest="roombrightnesslimits",
help="Sets the add-on lights min and max brightness "
"for the room settings this takes 2 arguments min max with each being (0-16)",
)
addon_light_group.add_option(
"--decrease-brightness",
default=None,
action="store_true",
help="Decreases the brightness of the light by 1",
)
addon_light_group.add_option(
"--increase-brightness",
default=None,
action="store_true",
help="increase the brightnes of the light by 1",
)
addon_light_group.add_option(
"--is-fan-light-installed",
default=None,
action="store_true",
help="Returns if the optional light module is present",
)
addon_light_group.add_option(
"--get-light-motionmode",
default=None,
action="store_true",
help="Returns if the light's motion sensor is ON or OFF",
)
addon_light_group.add_option(
"--set-light-motionmode",
default=None,
help="Sets if the light's motion sensor is ON or OFF",
)
addon_light_group.add_option(
"--get-lightmode",
default=None,
action="store_true",
help="Returns if the light is ON or OFF",
)
addon_light_group.add_option("--set-lightmode",
default=None,
help="Sets the light to ON or OFF")
addon_light_group.add_option(
"--toggle-lightmode",
default=None,
action="store_true",
help="Toggles the light mode between ON or OFF",
)
parser.add_option_group(device_group)
parser.add_option_group(fan_group)
parser.add_option_group(addon_light_group)
parser.add_option_group(wall_controller_group)
opts, args = parser.parse_args()
if not all([opts.ip, opts.name]):
print("IP and the fan name are required to work")
return 1
elif len(args) != 0:
print("Unknown options specified: " + " ".join(args))
return 1
else:
fan = SenseMe(ip=opts.ip, name=opts.name, model=opts.model)
# Process all the command line arguments
# Device commands first
if opts.get_beeper_sound:
mode = fan.beeper_sound
print(mode)
return 0
elif opts.set_beeper_sound:
mode = opts.set_beeper_sound.upper()
if mode == "ON" or mode == "OFF":
fan.beeper_sound = mode
return 0
else:
print("Invalid beeper sound specified, valid option are ON or OFF")
return 1
elif opts.get_device_time:
print(fan.device_time)
return 0
elif opts.get_firmware_name:
print(fan.firmware_name)
return 0
elif opts.get_firmware_version:
print(fan.firmware_version)
return 0
elif opts.list_devices:
devices = discover()
for device in devices:
print('%s,%s,%s,%s,"%s"' % (device.name, device.ip, device.mac,
device.series, device.model))
return 0
elif opts.get_led_indicators:
mode = fan.led_indicators
print(mode)
return 0
elif opts.set_led_indicators:
mode = opts.set_led_indicators.upper()
if mode == "OFF" or mode == "ON":
fan.led_indicators = mode
return 0
else:
print(
"Invalid led indicator state specified, valid option are ON or OFF"
)
return 1
elif opts.get_network_apstatus:
print(fan.network_ap_status)
return 0
elif opts.get_network_dhcp_state:
print(fan.network_dhcp_state)
return 0
elif opts.get_network_parameters:
(ip, subnetmask, defaultgw) = fan.network_parameters
print(ip + "," + subnetmask + "," + defaultgw)
return 0
elif opts.get_network_ssid:
print(fan.network_ssid)
return 0
elif opts.get_network_token:
print(fan.network_token)
return 0
# Fan commands
elif opts.get_fanmode:
mode = fan.fan_powered_on
if mode:
print("ON")
else:
print("OFF")
return 0
elif opts.set_fanmode:
mode = opts.set_fanmode.upper()
if mode == "ON":
fan.fan_powered_on = True
else:
fan.fan_powered_on = False
return 0
elif opts.get_height:
print(fan.height)
return 0
elif opts.set_height:
if opts.set_height > 0:
fan.height = opts.set_height
return 0
elif opts.toggle_fanmode:
fan.fan_toggle()
return 0
elif opts.get_speed:
print(fan.speed)
return 0
elif opts.set_speed is not None:
if opts.set_speed >= 7:
fan.speed = 7
elif opts.set_speed <= 0:
fan.speed = 0
else:
fan.speed = opts.set_speed
return 0
elif opts.get_minspeed:
print(fan.min_speed)
return 0
elif opts.get_maxspeed:
print(fan.max_speed)
return 0
elif opts.get_room_fanspeed_limits:
(min_speed, max_speed) = fan.room_settings_fan_speed_limits
print("%d %d" % (min_speed, max_speed))
elif opts.roomfanspeedlimits:
min_speed = opts.roomfanspeedlimits[0]
max_speed = opts.roomfanspeedlimits[1]
fan.room_settings_fan_speed_limits = (min_speed, max_speed)
elif opts.decrease_fanspeed:
fan.dec_speed()
return 0
elif opts.increase_fanspeed:
fan.inc_speed()
return 0
elif opts.get_learnmode:
mode = fan.learnmode
print(mode.upper())
return 0
elif opts.set_learnmode:
mode = opts.set_learnmode.upper()
if mode == "OFF" or mode == "ON":
fan.learnmode = mode
return 0
else:
print("Invalid learn mode specified, valid option are ON or OFF")
return 1
elif opts.get_learnmode_zerotemp:
print(fan.learnmode_zerotemp)
return 0
elif opts.set_learnmode_zerotemp:
if opts.set_learnmode_zerotemp >= 90:
fan.learn_mode_zero_temp = 90
elif opts.set_learnmode_zerotemp <= 50:
fan.learnmode_zerotemp = 50
else:
fan.learnmode_zerotemp = opts.set_learnmode_zero_temp
return 0
elif opts.get_learnmode_minspeed:
print(fan.learnmode_minspeed)
return 0
elif opts.set_learnmode_minspeed is not None:
if opts.set_learnmode_minspeed >= 7:
fan.learnmode_minspeed = 7
elif opts.set_learnmode_minspeed <= 0:
fan.learnmode_minspeed = 0
else:
fan.learnmode_minspeed = opts.set_learnmode_minspeed
return 0
elif opts.get_learnmode_maxspeed:
print(fan.learnmode_maxspeed)
return 0
elif opts.set_learnmode_maxspeed is not None:
if opts.set_learnmode_maxspeed >= 7:
fan.learnmode_maxspeed = 7
elif opts.set_learnmode_maxspeed <= 0:
fan.learnmode_maxspeed = 0
else:
fan.learnmode_maxspeed = opts.set_learnmode_maxspeed
return 0
elif opts.get_smartsleep_mode:
mode = fan.smartsleep_mode
print(mode.upper())
return 0
elif opts.set_smartsleep_mode:
mode = opts.set_smartsleep_mode.upper()
if mode == "OFF" or mode == "ON":
fan.smartsleep_mode = mode
return 0
else:
print(
"Invalid smartsleep mode specified, valid option are ON or OFF"
)
return 1
elif opts.get_smartsleep_idealtemp:
print(fan.smartsleep_idealtemp)
return 0
elif opts.set_smartsleep_idealtemp:
if opts.set_smartsleep_idealtemp >= 90:
fan.smartsleep_idealtemp = 90
elif opts.set_smartsleep_idealtemp <= 50:
fan.smartsleep_idealtemp = 50
else:
fan.smartsleep_idealtemp = opts.set_smartsleep_idealtemp
return 0
elif opts.get_smartsleep_minspeed:
print(fan.smartsleep_minspeed)
return 0
elif opts.set_smartsleep_minspeed is not None:
if opts.set_smartsleep_minspeed >= 7:
fan.smartsleep_minspeed = 7
elif opts.set_smartsleep_minspeed <= 0:
fan.smartsleep_minspeed = 0
else:
fan.smartsleep_minspeed = opts.set_smartsleep_minspeed
return 0
elif opts.get_smartsleep_maxspeed:
print(fan.smartsleep_maxspeed)
return 0
elif opts.set_smartsleep_maxspeed is not None:
if opts.set_smartsleep_maxspeed >= 7:
fan.smartsleep_maxspeed = 7
elif opts.set_smartsleep_maxspeed <= 0:
fan.smartsleep_maxspeed = 0
else:
fan.smartsleep_maxspeed = opts.set_smartsleep_maxspeed
return 0
elif opts.get_smartsleep_wakeup_brightness:
print(fan.smartsleep_wakeup_brightness)
return 0
elif opts.set_smartsleep_wakeup_brightness is not None:
if opts.set_smartsleep_wakeup_brightness >= 16:
fan.smartsleep_wakeup_brightness = 16
elif opts.set_smartsleep_wakeup_brightness <= 0:
fan.smartsleep_wakeup_brightness = 0
else:
fan.smartsleep_wakeup_brightness = opts.set_smartsleep_wakeup_brightness
return 0
elif opts.get_fan_direction:
mode = fan.fan_direction
if mode.upper() == "FWD":
print("FORWARD")
else:
print("REVERSE")
return 0
elif opts.set_fan_direction:
mode = opts.set_fan_direction.upper()
if mode == "FORWARD":
fan.fan_direction = "FWD"
return 0
elif mode == "REVERSE":
fan.fan_direction = "REV"
return 0
else:
print(
"Invalid fan direction specified, valid option are FORWARD or REVERSE"
)
return 1
elif opts.get_fan_motionmode:
mode = fan.fan_motionmode
print(mode.upper())
return 0
elif opts.set_fan_motionmode:
mode = opts.set_fan_motionmode.upper()
if mode == "OFF" or mode == "ON":
fan.fan_motionmode = mode
return 0
else:
print(
"Invalid fan motion detection mode specified, valid option are ON or OFF"
)
return 1
elif opts.get_motionmode_mintimer:
print(fan.motionmode_mintimer)
return 0
elif opts.get_motionmode_maxtimer:
print(fan.motionmode_maxtimer)
return 0
elif opts.get_motionmode_currenttimer:
print(fan.motionmode_currenttimer)
return 0
elif opts.set_motionmode_timer:
fan.motionmode_currenttimer = opts.set_motionmode_timer
return 1
elif opts.get_motionmode_occupied_status:
mode = fan.motionmode_occupied_status
print(mode.upper())
return 0
elif opts.get_wintermode:
mode = fan.wintermode
print(mode)
return 0
elif opts.set_wintermode:
mode = opts.set_wintermode.upper()
if mode == "OFF" or mode == "ON":
fan.wintermode = mode
return 0
else:
print("Invalid winter mode specified, valid option are ON or OFF")
return 1
elif opts.get_smartmode:
mode = fan.smartmode
print(mode)
return 0
elif opts.set_smartmode:
mode = opts.set_smartmode.upper()
if mode == "OFF" or mode == "COOLING" or mode == "HEATING":
fan.smartmode = mode
return 0
else:
print(
"Invalid smart mode specified, valid option are OFF, COOLING or HEATING"
)
return 1
elif opts.get_whooshmode:
mode = fan.whoosh
if mode:
print("ON")
else:
print("OFF")
return 0
elif opts.set_whooshmode:
mode = opts.set_whooshmode.upper()
if mode == "ON":
fan.whoosh = True
else:
fan.whoosh = False
return 0
# Add-on Light Commands
elif opts.get_brightness:
print(fan.brightness)
return 0
elif opts.set_brightness is not None:
if opts.set_brightness >= 16:
fan.brightness = 16
elif opts.set_brightness <= 0:
fan.brightness = 0
else:
fan.brightness = opts.set_brightness
return 0
elif opts.get_min_brightness:
print(fan.min_brightness)
return 0
elif opts.get_max_brightness:
print(fan.max_brightness)
return 0
elif opts.get_room_brightness_limits:
(min_brightness, max_brightness) = fan.room_settings_brightness_limits
print("%d %d" % (min_brightness, max_brightness))
return 0
elif opts.roombrightnesslimits:
min_brightness = opts.room_brightness_limits[0]
max_brightness = opts.room_brightness_limits[1]
fan.room_settings_brightness_limits = (min_brightness, max_brightness)
return 0
elif opts.decrease_brightness:
fan.dec_brightness()
return 0
elif opts.increase_brightness:
fan.inc_brightness()
return 0
elif opts.is_fan_light_installed:
mode = fan.is_fan_light_installed
if mode:
print("INSTALLED")
return 1
else:
print("NOT INSTALLED")
return 0
elif opts.get_light_motionmode:
mode = fan.light_motionmode
print(mode.upper())
return 0
elif opts.set_light_motionmode:
mode = opts.set_light_motionmode.upper()
if mode == "OFF" or mode == "ON":
fan.light_motionmode = mode
return 0
else:
print(
"Invalid light motion detection mode specified, valid option are ON or OFF"
)
return 1
elif opts.get_lightmode:
mode = fan.light_powered_on
if mode:
print("ON")
else:
print("OFF")
return 0
elif opts.set_lightmode:
mode = opts.set_lightmode.upper()
if mode == "ON":
fan.light_powered_on = True
else:
fan.light_powered_on = False
return 0
elif opts.toggle_lightmode:
fan.light_toggle()
return 0
else:
print("Invalid argument specified")
return 1
