thread.start_new_thread(threadNetDiscovery, (qNDD, LANNetwork, dictMobileHosts) )
DiscoveryInProgress = True
else:
if vVerbose.startswith('test1'):
print 'Discovery running'
refreshTime_LANDevices = time.time() + INTERVAL_LANDEVICES
# get fritz actor data
if time.time() > refreshTime_fritzactors:
if vVerbose.startswith('test1'):
print str(time.time())+'while: refreshTime_fritzactors ('+str(refreshTime_fritzactors)+')'
if modules_fritzactors:
if vVerbose.startswith('test1'):
print str(time.time())+'while: refreshTime_fritzactors: modules_fritzactors'
dictActors = threadFritzActors2()
# On Startup stop running radiators
if vBoolLC:# and not FAInProgress:
dictActors[str(dictSensors[iControlSensor].GetFritzActor())].SetActor(False)
refreshTime_fritzactors = time.time() + INTERVAL_FRITZACTORS
# Check if there is a webradio setting change
if time.time() > refreshTime_webradio:
if vVerbose.startswith('test'):
print str(time.time())+'while: refreshTime_webradio ('+str(refreshTime_webradio)+')'
if modules_webradio:
if vVerbose.startswith('test'):
print str(time.time())+'while: refreshTime_webradio: modules_webradio'
(webradio_active1, webradio_changed, webradio_result) = threadWebradioService('/var/sensorTool/www/webradio.station', webradio_active)
else:
if vVerbose.startswith('test1'):
print 'Discovery running'
refreshTime_LANDevices = time.time() + INTERVAL_LANDEVICES
# get fritz actor data
if time.time() > refreshTime_fritzactors:
if vVerbose.startswith('test1'):
print str(time.time()) + 'while: refreshTime_fritzactors (' + str(
refreshTime_fritzactors) + ')'
if modules_fritzactors:
if vVerbose.startswith('test1'):
print str(time.time(
)) + 'while: refreshTime_fritzactors: modules_fritzactors'
dictActors = threadFritzActors2()
# On Startup stop running radiators
if vBoolLC: # and not FAInProgress:
dictActors[str(
dictSensors[iControlSensor].GetFritzActor())].SetActor(
False)
refreshTime_fritzactors = time.time() + INTERVAL_FRITZACTORS
# Check if there is a webradio setting change
if time.time() > refreshTime_webradio:
if vVerbose.startswith('test'):
print str(time.time()) + 'while: refreshTime_webradio (' + str(
refreshTime_webradio) + ')'
if modules_webradio:
def threadLogic(in_q, boolRunQ, vVerbose=''):
vVerbose = str(sys.argv[1])
if vVerbose.startswith('test'):
print 'sensorService starting'
sConfig = sensorConfig('/home/pi/sensorTool/sensorTool.conf', vVerbose)
sensorSwitches('/home/pi/sensorTool/switches.conf', vVerbose)
# GPIO Settings BCM Layout
#RelayIN1 = gpio.GPIOout(sConfig.getGPIORelayIN1())
#RelayIN2 = gpio.GPIOout(sConfig.getGPIORelayIN2())
#LedG = gpio.GPIOout(sConfig.getGPIOLedGreen())
#LedY = gpio.GPIOout(sConfig.getGPIOLedYellow())
#LedR = gpio.GPIOout(sConfig.getGPIOLedRed())
BMelder = gpio.GPIOin(sConfig.getGPIOmotion())
Leuchte = sensorLight(sConfig.getGPIOlight())
# Start state
#LedG.on()
#LedY.on()
#LedR.on()
boolLeuchte = False
# constants -------------------------------------------------------------------
sCrypt = sensorCrypt(sConfig.getCryptKey())
MAXTIME = sConfig.getMaxTime()
MINTIME = sConfig.getMinTime()
INTERVAL_SENSORS = sConfig.getIntervalSensors()
INTERVAL_FRITZACTORS = sConfig.getIntervalActors()
INTERVAL_WEBRADIO = sConfig.getIntervalWebradio()
INTERVAL_LANDEVICES = sConfig.getIntervalLANDevices()
SERVER = sConfig.getServer()
TriggerCountA = sConfig.getTriggerCountA()
TriggerCountB = sConfig.getTriggerCountB()
#dictInterval = {}
dictInterval = sensorInterval(sConfig.getDictIntervalle())
vTitel = sConfig.getTitel()
dictActors = {}
dictSensors = {}
dictSensors = sConfig.getDictSensors()
iControlSensor = sConfig.getiControlSensor()
iOutdoorSensor = sConfig.getiOutdoorSensor()
boolOutdoorSensor = False
if iOutdoorSensor is not None:
boolOutdoorSensor = True
sH_Log = sensorHistory('/var/sensorTool/www/loglatestentry.php',
'/var/sensorTool/www/logdata.php')
iLog = 0
modules_webradio = sConfig.getModuleWebradio() # ok
webradio_active = False
modules_webradiomotion = sConfig.getModuleWebradiomotion() # ok
webradio_motionTimeOut = sConfig.getIntervalWebradiomotion()
webradio_motionActive = True
modules_surveillance = sConfig.getModuleSurveillance() # ok
modules_motiondetector = sConfig.getModuleMotiondetector()
motion_detected = False
motion_detected_report = False
ledalarm = False
modules_radiators = sConfig.getModuleRadiators() # ok
RadiatorStarted = False
modules_relais = sConfig.getModuleRelais()
modules_fritzactors = sConfig.getModuleFritzActors() # ok
modules_LANDevices = sConfig.getModuleLANDevices() # ok
LANDevices_Present = False
LANNetwork = sConfig.getLANNetwork()
dictMobileHosts = sConfig.getdictMobileHosts()
sConfig.SetupDynamicConfig('/var/sensorTool/www/dynamic.conf')
dictActiveModules = {}
dictActiveModules['time'] = list()
dictActiveModules['Motiondetector'] = moduleDevice(20)
dictActiveModules['NetworkDeviceDetector'] = moduleDevice(30)
dictActiveModules['Webradio'] = moduleDevice(40)
dictActiveModules['Radiators'] = moduleDevice(60)
dictActiveModules['ledalarm'] = moduleDevice(90)
dictTemperature = {}
dictTemperature['time'] = list()
dictRelativeHumidity = {}
dictRelativeHumidity['time'] = list()
dictAbsoluteHumidity = {}
dictAbsoluteHumidity['time'] = list()
dictPressure = {}
dictPressure['time'] = list()
for vKey in dictSensors:
sSensorName = dictSensors[vKey].GetSensor()
dictTemperature[sSensorName] = moduleDevice(0)
dictRelativeHumidity[sSensorName] = moduleDevice(0)
dictAbsoluteHumidity[sSensorName] = moduleDevice(0)
if dictSensors[vKey].GetBME():
dictPressure[sSensorName] = moduleDevice(0)
if vVerbose == 'test':
print 'MAXTIME' + str(MAXTIME)
print 'MINTIME' + str(MINTIME)
print 'INTERVAL_SENSORS' + str(INTERVAL_SENSORS)
print 'INTERVAL_FRITZACTORS' + str(INTERVAL_FRITZACTORS)
print 'INTERVAL_WEBRADIO' + str(INTERVAL_WEBRADIO)
print 'INTERVAL_LANDEVICES' + str(INTERVAL_LANDEVICES)
print 'webradio_motionTimeOut' + str(webradio_motionTimeOut)
sleep(1)
# Config Variable leeren
sConfig = None
vBoolLC = True
# fritz off moved after first fritzactors call
degC = 0
hPa = 0
hRel = 0
degC1 = 0
hPa1 = 0
vBoolSensor1 = True
counterHigh = 0
counterLow = 0
timeDuration = 0
# functions for print out and WhatsApp
def getInfoText(vStatus):
vHeader = vTitel
if vVerbose.startswith('test'):
vHeader += ' Test\n'
else:
vHeader += '\n'
vNow = datetime.datetime.now().strftime(
'%Y-%m-%d %H:%M:%S') + ' ' + vStatus
vSensorPaket = ''
for vKey in dictSensors:
vSensorPaket += '\n ' + str(dictSensors[vKey].GetInfo(
False, False))
vActorsPaket = ''
for vAKey in dictActors:
vActorsPaket += '\n' + str(dictActors[vAKey].GetInfo(False, False))
vGPIOStatus = ''
# vGPIOStatus += '\n Relais: ' + str(RadiatorStarted) + ' (' + str(RelayIN1.isOn) + '|' + str(RelayIN2.isOn) + ')'
vGPIOStatus += '\n Code: ' + str(timeDuration) + ';' + str(
counterHigh) + ';' + str(counterLow)
# vGPIOStatus += '\n LED: ' + str(LedG.isOn) + str(LedY.isOn) + str(LedR.isOn)
vReturnText = vHeader + vNow + vSensorPaket + vActorsPaket + vGPIOStatus # + str(dictActors)
return vReturnText
# print CSV
# def getInfoCSV():
# vReturnText = datetime.datetime.now().strftime('%Y-%m-%d %H:%M:%S') + ';'
# vReturnText = vReturnText + str(RelaisStarted) + ';'
# vReturnText = vReturnText + str(timeDuration) + ';' + str(counterHigh) + ';' + str(counterLow) + ";"
# vReturnText = vReturnText + str(RelayIN1.isOn) + str(RelayIN2.isOn) + ";"
# vReturnText = vReturnText + str(LedG.isOn) + str(LedY.isOn) + str(LedR.isOn) + ";"
#
# for vKey in dictSensors:
# vReturnText = vReturnText + str(dictSensors[vKey].GetInfo(True, False))
# return vReturnText
# print html status output
def getHTML():
vhttpResult = ''
vhttpResult += 'echo "<DIV class=\\"sensor\\"><TABLE class=\\"sensor\\"><TR>\\n";\n'
vhttpResult += 'echo "<TD>\\n";\n'
for vKey in dictSensors:
vhttpResult += dictSensors[vKey].GetHttpTable()
vhttpResult += 'echo "</TD>\\n";\n'
vhttpResult += 'echo "<TD>\\n";\n'
for vKey in dictActiveModules:
if vKey <> 'time':
vhttpResult += dictActiveModules[vKey].GetHttpTable(vKey)
if modules_fritzactors:
for vAKey in dictActors:
vhttpResult += dictActors[vAKey].GetHttpTable()
vhttpResult += 'echo "</TD></TR></TABLE></DIV>\\n";\n'
return vhttpResult
# find out private ip address -------------------------------------------------
# ip = [(s.connect(('8.8.8.8', 80)), s.getsockname()[0], s.close()) for s in [socket.socket(socket.AF_INET, socket.SOCK_DGRAM)]][0][1]
# init -----------------------------------------------------------------------
# refresh for sensor data
refreshTime_sensors = time.time() + INTERVAL_SENSORS
# refresh for fritz actors
refreshTime_fritzactors = time.time()
refreshTime_webradio = time.time()
refreshTime_motiondetector = time.time()
# refresh for Queue
# if vVerbose.startswith('test'):
# INTERVAL_LANDEVICES = 3
refreshTime_LANDevices = time.time() + INTERVAL_LANDEVICES
qNDD = Queue.LifoQueue(maxsize=1)
DiscoveryInProgress = False
refreshTime_Queue = 5
INTERVAL_QUEUE = 5
refreshTime_webradioMotion = time.time() + webradio_motionTimeOut
qSensors = Queue.LifoQueue()
#qSensors = Queue.LifoQueue(maxsize=1)
thread.start_new_thread(threadSensors, (qSensors, vVerbose))
if vVerbose.startswith('test'):
print 'MT: Starting Thread1.Sensors'
# FAInProgress = False
# qFA = Queue.LifoQueue(maxsize=1)
# loop ------------------------------------------------------------------------
#LedR.off()
if vVerbose.startswith('test1'):
print 'Config loaded'
print str(refreshTime_sensors) + '##' + str(time.time())
while time.strftime('%H%M') < MAXTIME:
# Check NDD Queue every INTERVAL_LANDEVICES secs
if time.time() > refreshTime_Queue:
if vVerbose.startswith('test'):
print str(time.time()) + 'while: refreshTime_Queue (' + str(
refreshTime_Queue) + ')'
if not qNDD.empty():
#dictNetDevs = {}
#dictNetDevs = qNDD.get()
boolNDD = qNDD.get()
LANDevices_Present = boolNDD
if vVerbose.startswith('test'):
print str(
time.time()
) + 'while: refreshTime_Queue: NDD (True) : LANDevices_Present (' + str(
LANDevices_Present) + ')'
qNDD.task_done()
DiscoveryInProgress = False
refreshTime_Queue = time.time() + INTERVAL_QUEUE
if time.time() > refreshTime_motiondetector:
if vVerbose.startswith('test1'):
print str(
time.time()) + 'while: refreshTime_motiondetector (' + str(
refreshTime_motiondetector) + ')'
if modules_motiondetector:
if vVerbose.startswith('test1'):
print str(
time.time()
) + 'while: refreshTime_motiondetector: modules_motiondetector'
if BMelder.status() == 1:
motion_detected = True
motion_detected_report = True
else:
motion_detected = False
if vVerbose.startswith('test1'):
print str(
time.time()
) + 'while: refreshTime_motiondetector: modules_motiondetector: motion_detected_report(' + str(
motion_detected_report) + ')'
if modules_surveillance and modules_motiondetector:
if vVerbose.startswith('test1'):
print str(
time.time()
) + 'while: refreshTime_motiondetector: modules_surveillance, modules_motiondetector'
if not LANDevices_Present:
if motion_detected:
threadPICAM2('surveillance')
sH_Log.Add(' surveillance take picset ')
else:
threadPICAM2('low')
sH_Log.Add(' surveillance take pic low ')
refreshTime_motiondetector = time.time() + 1
if time.time() > refreshTime_LANDevices:
if vVerbose.startswith('test1'):
print str(
time.time()) + 'while: refreshTime_LANDevices (' + str(
refreshTime_LANDevices) + ')'
if modules_LANDevices:
if vVerbose.startswith('test1'):
print str(time.time(
)) + 'while: refreshTime_LANDevices: modules_LANDevices'
#parallel with threading and queue
if not DiscoveryInProgress:
if vVerbose.startswith('test1'):
print str(
time.time()
) + 'while: refreshTime_LANDevices: modules_LANDevices: Start Network Device Discovery!'
thread.start_new_thread(
threadNetDiscovery,
(qNDD, LANNetwork, dictMobileHosts))
DiscoveryInProgress = True
else:
if vVerbose.startswith('test1'):
print 'Discovery running'
refreshTime_LANDevices = time.time() + INTERVAL_LANDEVICES
# get fritz actor data
if time.time() > refreshTime_fritzactors:
if vVerbose.startswith('test1'):
print str(
time.time()) + 'while: refreshTime_fritzactors (' + str(
refreshTime_fritzactors) + ')'
if modules_fritzactors:
if vVerbose.startswith('test1'):
print str(time.time(
)) + 'while: refreshTime_fritzactors: modules_fritzactors'
dictActors = threadFritzActors2()
# On Startup stop running radiators
if vBoolLC: # and not FAInProgress:
dictActors[str(
dictSensors[iControlSensor].GetFritzActor())].SetActor(
False)
refreshTime_fritzactors = time.time() + INTERVAL_FRITZACTORS
# Check if there is a webradio setting change
if time.time() > refreshTime_webradio:
if vVerbose.startswith('test'):
print str(time.time()) + 'while: refreshTime_webradio (' + str(
refreshTime_webradio) + ')'
if modules_webradio:
if vVerbose.startswith('test'):
print str(time.time(
)) + 'while: refreshTime_webradio: modules_webradio'
(webradio_active1, webradio_changed,
webradio_result) = threadWebradioService(
'/var/sensorTool/www/webradio.station', webradio_active)
if webradio_changed:
if webradio_active <> webradio_active1:
webradio_active = webradio_active1
sH_Log.Add(' Webradio change: ' + str(webradio_result))
elif not modules_webradio and webradio_active:
if vVerbose.startswith('test'):
print str(
time.time()
) + 'while: refreshTime_webradio: not modules_webradio, webradio_active'
(webradio_active, webradio_changed,
webradio_result) = threadWebradioService(
'/var/sensorTool/www/webradio.station', webradio_active,
True)
sH_Log.Add(' Webradio stopped')
if webradio_motionActive and not webradio_active and modules_webradio and modules_webradiomotion:
if vVerbose.startswith('test'):
print str(
time.time()
) + 'while: refreshTime_webradio: webradio_motionActive, webradio_active, modules_webradio, modules_webradiomotion'
refreshTime_webradioMotion = time.time(
) + webradio_motionTimeOut
(webradio_active, webradio_changed,
webradio_result) = threadWebradioService(
'/var/sensorTool/www/webradio.station', webradio_active,
False, True)
sH_Log.Add(' Webradio started')
refreshTime_webradio = time.time() + INTERVAL_WEBRADIO
#print 'time '+str(time.time())+'>'+str(refreshTime_webradioMotion)+' refreshTime_webradioMotion'
# Timeout for webradio - stop when no motion is detected (active motioncontrol)
if time.time() > refreshTime_webradioMotion:
if vVerbose.startswith('test'):
print str(
time.time()) + 'while: refreshTime_webradioMotion (' + str(
refreshTime_webradioMotion) + ')'
#print str(time.time())+'while: refreshTime_webradioMotion: modules_webradio ('+str(modules_webradio)+'), modules_webradiomotion ('+str(modules_webradiomotion)+'), not webradio_motionActive('+str(webradio_motionActive)+')'
if modules_webradio and modules_webradiomotion and not webradio_motionActive and webradio_active:
if vVerbose.startswith('test'):
print str(
time.time()
) + 'while: refreshTime_webradioMotion: modules_webradio (' + str(
modules_webradio
) + '), modules_webradiomotion (' + str(
modules_webradiomotion
) + '), not webradio_motionActive(' + str(
webradio_motionActive) + '), webradio_active (' + str(
webradio_active) + ')'
(webradio_active, webradio_changed,
webradio_result) = threadWebradioService(
'/var/sensorTool/www/webradio.station', webradio_active,
True)
sH_Log.Add(' Webradio stopped, no motion')
refreshTime_webradioMotion = time.time() + INTERVAL_WEBRADIO
# every 10 seconds, try to send data to servers
if time.time() > refreshTime_sensors:
if vVerbose.startswith('test'):
print str(time.time()) + 'while: refreshTime_sensors (' + str(
refreshTime_sensors) + ')'
print str(refreshTime_sensors) + '##' + str(time.time())
# print str(refreshTime2) + '##' + str(time.time())
# Werte holen per http request ::D
try:
vR = None
if not in_q.empty():
vR = in_q.get()
in_q.task_done()
dictResponse = {}
dictResponse = ast.literal_eval(str(vR))
if vVerbose == 'test1':
print dictResponse
for vSensor in dictResponse:
dictTemp = {}
dictTemp['ID'] = vSensor
if 'Time' in dictResponse[vSensor]:
dictTemp['Time'] = dictResponse[vSensor]['Time']
if 'RH' in dictResponse[vSensor]:
dictTemp['RH'] = dictResponse[vSensor]['RH']
if 'T' in dictResponse[vSensor]:
dictTemp['T'] = dictResponse[vSensor]['T']
if 'hPa' in dictResponse[vSensor]:
dictTemp['hPa'] = dictResponse[vSensor]['hPa']
boolBME280 = False
if (vSensor == 'bme280'):
boolBME280 = True
for vKey in dictSensors:
if dictSensors[vKey].GetHex() == vSensor:
dictSensors[vKey].SetSensorData(
dictTemp, boolBME280)
#DeviceMotion.SetSensorData(motion_detected_report)
if modules_webradiomotion:
if motion_detected_report:
# if motion detected than increase refreshTime_webradioMotion by webradio_motionTimeOut
webradio_motionActive = True
refreshTime_webradioMotion = time.time(
) + webradio_motionTimeOut
print refreshTime_webradioMotion
else:
# no motion detected, but mobile device present, webradio must be acticve
if modules_LANDevices and LANDevices_Present:
webradio_motionActive = True
refreshTime_webradioMotion = time.time(
) + webradio_motionTimeOut
print refreshTime_webradioMotion
else:
webradio_motionActive = False
# Values for Diagramm
sPlottingTime = str(
datetime.datetime.now().strftime('%Y-%m-%d %H:%M:%S'))
dictTemperature['time'].append(sPlottingTime)
dictRelativeHumidity['time'].append(sPlottingTime)
dictAbsoluteHumidity['time'].append(sPlottingTime)
dictPressure['time'].append(sPlottingTime)
for vKey in dictSensors:
sSensorName = dictSensors[vKey].GetSensor()
dictTemperature[sSensorName].SetModuleValue(
dictSensors[vKey].GetT())
dictRelativeHumidity[sSensorName].SetModuleValue(
dictSensors[vKey].GetRH())
dictAbsoluteHumidity[sSensorName].SetModuleValue(
dictSensors[vKey].GetAH())
if dictSensors[vKey].GetBME():
dictPressure[sSensorName].SetModuleValue(
dictSensors[vKey].GetPA())
dictActiveModules['time'].append(sPlottingTime)
dictActiveModules['Motiondetector'].SetModuleStatus(
motion_detected_report)
dictActiveModules['NetworkDeviceDetector'].SetModuleStatus(
LANDevices_Present)
dictActiveModules['Webradio'].SetModuleStatus(webradio_active)
dictActiveModules['Radiators'].SetModuleStatus(RadiatorStarted)
dictActiveModules['ledalarm'].SetModuleStatus(ledalarm)
motion_detected_report = False
ledalarm = False
except Exception as e:
sH_Log.Add(str(e))
print e
# pass
# ############### Dynamic Config Start ###################
# Dynamische Config einlesen #soll ueber http request gesteuert werden.
dynamicConf = ConfigParser.ConfigParser()
dynamicConf.read('/var/sensorTool/www/dynamic.conf')
# Try to change the Relais Status
try:
if vVerbose.startswith('test'):
print str(time.time()
) + 'while: refreshTime_sensors: dynamicConf'
if dynamicConf.getboolean(
'modules', 'modules_radiators') != modules_radiators:
modules_radiators = dynamicConf.getboolean(
'modules', 'modules_radiators')
sH_Log.Add(' modules_radiators set to ' +
str(modules_radiators))
if vVerbose.startswith('test'):
print str(
time.time()
) + 'while: refreshTime_sensors: dynamicConf: modules_radiators(' + str(
modules_radiators) + ')'
if dynamicConf.getboolean(
'modules',
'modules_motiondetector') != modules_motiondetector:
modules_motiondetector = dynamicConf.getboolean(
'modules', 'modules_motiondetector')
sH_Log.Add(' modules_motiondetector set to ' +
str(modules_motiondetector))
if not modules_motiondetector and motion_detected:
motion_detected = False
motion_detected_report = False
if vVerbose.startswith('test'):
print str(
time.time()
) + 'while: refreshTime_sensors: dynamicConf: modules_motiondetector(' + str(
modules_motiondetector) + ')'
if dynamicConf.getboolean(
'modules',
'modules_surveillance') != modules_surveillance:
modules_surveillance = dynamicConf.getboolean(
'modules', 'modules_surveillance')
sH_Log.Add(' modules_surveillance set to ' +
str(modules_surveillance))
if not modules_surveillance and motion_detected:
motion_detected = False
if vVerbose.startswith('test'):
print str(
time.time()
) + 'while: refreshTime_sensors: dynamicConf: modules_surveillance(' + str(
modules_surveillance) + ')'
if modules_surveillance and not modules_motiondetector:
sH_Log.Add(' modules_motiondetector set to ' +
str(modules_motiondetector))
modules_motiondetector = True
if vVerbose.startswith('test'):
print str(
time.time()
) + 'while: refreshTime_sensors: dynamicConf: modules_surveillance: modules_motiondetector(' + str(
modules_motiondetector) + ')'
if dynamicConf.getboolean('modules',
'modules_relais') != modules_relais:
modules_relais = dynamicConf.getboolean(
'modules', 'modules_relais')
sH_Log.Add(' modules_relais set to ' + str(modules_relais))
if vVerbose.startswith('test'):
print str(
time.time()
) + 'while: refreshTime_sensors: dynamicConf: modules_relais(' + str(
modules_relais) + ')'
if dynamicConf.getboolean(
'modules',
'modules_fritzactors') != modules_fritzactors:
modules_fritzactors = dynamicConf.getboolean(
'modules', 'modules_fritzactors')
sH_Log.Add(' modules_fritzactors set to ' +
str(modules_fritzactors))
if vVerbose.startswith('test'):
print str(
time.time()
) + 'while: refreshTime_sensors: dynamicConf: modules_fritzactors(' + str(
modules_fritzactors) + ')'
if dynamicConf.getboolean(
'modules', 'modules_LANDevices') != modules_LANDevices:
modules_LANDevices = dynamicConf.getboolean(
'modules', 'modules_LANDevices')
sH_Log.Add(' modules_LANDevices set to ' +
str(modules_LANDevices))
if not modules_LANDevices and LANDevices_Present:
LANDevices_Present = False
if vVerbose.startswith('test'):
print str(
time.time()
) + 'while: refreshTime_sensors: dynamicConf: modules_LANDevices(' + str(
modules_LANDevices) + ')'
if dynamicConf.getboolean(
'modules', 'modules_webradio') != modules_webradio:
modules_webradio = dynamicConf.getboolean(
'modules', 'modules_webradio')
sH_Log.Add(' modules_webradio set to ' +
str(modules_webradio))
if vVerbose.startswith('test'):
print str(
time.time()
) + 'while: refreshTime_sensors: dynamicConf: modules_webradio(' + str(
modules_webradio) + ')'
if dynamicConf.getboolean(
'modules',
'modules_webradiomotion') != modules_webradiomotion:
modules_webradiomotion = dynamicConf.getboolean(
'modules', 'modules_webradiomotion')
sH_Log.Add(' modules_webradiomotion set to ' +
str(modules_webradiomotion))
if not modules_webradiomotion and not webradio_motionActive:
webradio_motionActive = True
if vVerbose.startswith('test'):
print str(
time.time()
) + 'while: refreshTime_sensors: dynamicConf: modules_webradiomotion(' + str(
modules_webradiomotion) + ')'
if modules_webradiomotion and not modules_webradio:
sH_Log.Add(' modules_webradio set to ' +
str(modules_webradio))
modules_webradio = True
if vVerbose.startswith('test'):
print str(
time.time()
) + 'while: refreshTime_sensors: dynamicConf: modules_webradiomotion: modules_webradio(' + str(
modules_webradio) + ')'
except Exception as e:
sH_Log.Add(str(e))
print e
pass
# iterate through sensor data
for vKey in dictSensors:
try:
vSetHighRH = False
if dictSensors[vKey].GetThresholdHighHumidity() == False:
vSetHighRH = True
elif dynamicConf.getfloat(
'Sensor' + str(vKey), 'threshold_high_humidity'
) != dictSensors[vKey].GetThresholdHighHumidity():
vSetHighRH = True
if vSetHighRH:
dictSensors[vKey].SetThresholdHighHumidity(
dynamicConf.getfloat('Sensor' + str(vKey),
'threshold_high_humidity'))
sH_Log.Add(
'Threshold High RH S' + str(vKey) + ':' +
str(dictSensors[vKey].GetThresholdHighHumidity()))
if vVerbose.startswith('test'):
print 'Threshold High RH S' + str(vKey) + ':' + str(
dictSensors[vKey].GetThresholdHighHumidity())
except:
pass # Exception, e:
try:
vSetLowT = False
if dictSensors[vKey].GetThresholdLowTemperature() == False:
vSetLowT = True
elif dynamicConf.getfloat(
'Sensor' + str(vKey), 'threshold_low_temperature'
) != dictSensors[vKey].GetThresholdLowTemperature():
vSetLowT = True
if vSetHighRH:
dictSensors[vKey].SetThresholdLowTemperature(
dynamicConf.getfloat('Sensor' + str(vKey),
'threshold_low_temperature'))
sH_Log.Add('Threshold Low T S' + str(vKey) + ':' + str(
dictSensors[vKey].GetThresholdLowTemperature()))
if vVerbose == 'test':
print 'Threshold Low T S' + str(vKey) + ':' + str(
dictSensors[vKey].GetThresholdLowTemperature())
except:
pass # Exception, e:
# ############### Dynamic Config Ende ###################
if vBoolLC == True:
sendWhatsApps(dictSensors[iControlSensor].GetMobiles(),
getInfoText("Active"))
sH_Log.Add('sensorTool started')
#LedY.off()
vBoolLC = False
# ############### Check for Radiator interval start ##################
vBoolInterval = dictInterval.isNowInInterval()
# ############### Check for Radiator interval Ende ##################
if vVerbose.startswith('test1'):
print('Threshold: ' +
str(dictSensors[iControlSensor].GetThreshold()) +
' RadiatorStarted: ' + str(RadiatorStarted) +
' vBoolInterval: ' + str(vBoolInterval) +
' modules_radiators: ' + str(modules_radiators))
boolTriggerOutdoor = True
if boolOutdoorSensor:
deltaAH = 0.5
if dictSensors[iControlSensor].GetAH(
) is not None and dictSensors[iOutdoorSensor].GetAH(
) is not None:
if (float(dictSensors[iControlSensor].GetAH())) < (float(
dictSensors[iOutdoorSensor].GetAH()) + deltaAH):
boolTriggerOutdoor = False
if dictSensors[iControlSensor].GetThreshold(
) and RadiatorStarted == False and vBoolInterval and modules_radiators and boolTriggerOutdoor:
counterHigh = counterHigh + 1
#if LedY.isOn == False:
# LedY.on()
# sH_Log.Add(dictSensors[iControlSensor].GetSensor() + ' Yellow LED (H)!')
else:
counterHigh = 0
if dictSensors[iControlSensor].GetThreshold(
) == False and RadiatorStarted and vBoolInterval and modules_radiators and boolTriggerOutdoor:
counterLow = counterLow + 1
#if LedY.isOn == False:
# LedY.on()
# sH_Log.Add(dictSensors[iControlSensor].GetSensor() + ' Yellow LED (L)!')
else:
counterLow = 0
if vVerbose.startswith('test1'):
print('counterLow: ' + str(counterLow) + ' counterHigh: ' +
str(counterHigh))
boolInfoLight = False
# Alle anderen Sensoren (außer Keller) durchgehen
for vKey in dictSensors:
# if dictSensors[vKey].GetBME() != True:
if iControlSensor <> vKey:
vBoolThreshold = dictSensors[vKey].GetThreshold()
# Grenzwert
if vBoolThreshold and dictSensors[vKey].GetSendMessage():
sendWhatsApps(dictSensors[vKey].GetMobiles(),
dictSensors[vKey].GetMessage())
dictSensors[vKey].SetSendMessage(False)
sH_Log.Add(dictSensors[vKey].GetSensor() +
dictSensors[vKey].GetMessage())
boolInfoLight = True
elif dictSensors[vKey].GetSendMessage() == False:
dictSensors[vKey].SetSendMessage(True)
# Delta
vBoolDelta = dictSensors[vKey].GetDelta()
counterDelta = dictSensors[vKey].GetDeltaCounter()
if vBoolDelta and dictSensors[vKey].GetDeltaCounter() == 0:
dictSensors[vKey].SetDeltaCounter(counterDelta + 1)
elif counterDelta > 0:
if counterDelta > dictSensors[vKey].GetTriggerCount():
sendWhatsApps(dictSensors[vKey].GetMobiles(),
dictSensors[vKey].GetDeltaMessage())
sH_Log.Add(dictSensors[vKey].GetDeltaMessage())
dictSensors[vKey].SetDeltaCounter(0)
boolInfoLight = True
else:
dictSensors[vKey].SetDeltaCounter(counterDelta + 1)
if boolInfoLight:
if not boolLeuchte:
boolLeuchte = Leuchte.activate(boolLeuchte)
ledalarm = True
else:
if boolLeuchte:
boolLeuchte = Leuchte.deactivate(boolLeuchte)
if counterHigh == TriggerCountA and RadiatorStarted == False and vBoolInterval and modules_radiators and boolTriggerOutdoor:
dictActors[
dictSensors[iControlSensor].GetFritzActor()].SetActor(True)
#LedR.on()
#LedY.off()
RadiatorStarted = True
sendWhatsApps(dictSensors[iControlSensor].GetMobiles(),
getInfoText("Started"))
sH_Log.Add('Radiator activated')
elif (counterLow == TriggerCountB or vBoolInterval == False
or modules_radiators == False
or boolTriggerOutdoor == False) and RadiatorStarted:
dictActors[dictSensors[iControlSensor].GetFritzActor(
)].SetActor(False)
#LedR.off()
#LedY.off()
RadiatorStarted = False
sendWhatsApps(dictSensors[iControlSensor].GetMobiles(),
getInfoText("Stopped"))
sH_Log.Add('Radiator deactivated')
if vVerbose.startswith('test'):
#print getInfoText("Status")
print '##### - #####'
threadCreatePHPFile('/var/sensorTool/www/sensor.php', getHTML())
# thread.start_new_thread(threadCreatePHPFile, ('/var/sensorTool/www/sensor.php', getHTML(),))
plotting_DeviceValues(dictActiveModules, '1_Modules', vVerbose)
plotting_DeviceValues(dictTemperature, '3_Temperature', vVerbose,
-20, 50)
plotting_DeviceValues(dictRelativeHumidity, '4_Relative_Humidity',
vVerbose)
plotting_DeviceValues(dictAbsoluteHumidity, '2_Absolute_Humidity',
vVerbose, 0, 30)
plotting_DeviceValues(dictPressure, '9_Pressure', vVerbose, 700,
1100)
# thread.start_new_thread(plotting, (dictPlotSens, dictPlotAussen, vVerbose,))
refreshTime_sensors = time.time() + INTERVAL_SENSORS
sleep(1) # 0.1
if RadiatorStarted:
dictActors[dictSensors[iControlSensor].GetFritzActor()].SetActor(False)
sendWhatsApps(dictSensors[iControlSensor].GetMobiles(),
getInfoText("Inactive - going down"))
if vVerbose.startswith('test'):
print 'GPIO Down'
#LedY.off()
#LedR.off()
#LedG.off()
if boolLeuchte:
Leuchte.deactivate(boolLeuchte)
if not vVerbose.startswith('test'):
os.system("sudo init 0")
else:
print ' - Ende - '
# vim: tabstop=8 expandtab shiftwidth=4 softtabstop=4
def threadLogic(in_q, boolRunQ, vVerbose=''):
vVerbose = str(sys.argv[1])
if vVerbose.startswith('test'):
print 'sensorService starting'
sConfig = sensorConfig('/home/pi/sensorTool/sensorTool.conf', vVerbose)
sensorSwitches('/home/pi/sensorTool/switches.conf', vVerbose);
# GPIO Settings BCM Layout
#RelayIN1 = gpio.GPIOout(sConfig.getGPIORelayIN1())
#RelayIN2 = gpio.GPIOout(sConfig.getGPIORelayIN2())
#LedG = gpio.GPIOout(sConfig.getGPIOLedGreen())
#LedY = gpio.GPIOout(sConfig.getGPIOLedYellow())
#LedR = gpio.GPIOout(sConfig.getGPIOLedRed())
BMelder = gpio.GPIOin(sConfig.getGPIOmotion())
Leuchte = sensorLight(sConfig.getGPIOlight())
# Start state
#LedG.on()
#LedY.on()
#LedR.on()
boolLeuchte = False
# constants -------------------------------------------------------------------
sCrypt = sensorCrypt(sConfig.getCryptKey())
MAXTIME = sConfig.getMaxTime()
MINTIME = sConfig.getMinTime()
INTERVAL_SENSORS = sConfig.getIntervalSensors()
INTERVAL_FRITZACTORS = sConfig.getIntervalActors()
INTERVAL_WEBRADIO = sConfig.getIntervalWebradio()
INTERVAL_LANDEVICES = sConfig.getIntervalLANDevices()
SERVER = sConfig.getServer()
TriggerCountA = sConfig.getTriggerCountA()
TriggerCountB = sConfig.getTriggerCountB()
#dictInterval = {}
dictInterval = sensorInterval(sConfig.getDictIntervalle())
vTitel = sConfig.getTitel()
dictActors = {}
dictSensors = {}
dictSensors = sConfig.getDictSensors()
iControlSensor = sConfig.getiControlSensor()
iOutdoorSensor = sConfig.getiOutdoorSensor()
boolOutdoorSensor = False
if iOutdoorSensor is not None:
boolOutdoorSensor = True
sH_Log = sensorHistory('/var/sensorTool/www/loglatestentry.php', '/var/sensorTool/www/logdata.php')
iLog = 0
modules_webradio = sConfig.getModuleWebradio() # ok
webradio_active = False
modules_webradiomotion = sConfig.getModuleWebradiomotion() # ok
webradio_motionTimeOut = sConfig.getIntervalWebradiomotion()
webradio_motionActive = True
modules_surveillance = sConfig.getModuleSurveillance() # ok
modules_motiondetector = sConfig.getModuleMotiondetector()
motion_detected = False
motion_detected_report = False
ledalarm = False
modules_radiators = sConfig.getModuleRadiators() # ok
RadiatorStarted = False
modules_relais = sConfig.getModuleRelais()
modules_fritzactors = sConfig.getModuleFritzActors() # ok
modules_LANDevices = sConfig.getModuleLANDevices() # ok
LANDevices_Present = False
LANNetwork = sConfig.getLANNetwork()
dictMobileHosts = sConfig.getdictMobileHosts()
sConfig.SetupDynamicConfig('/var/sensorTool/www/dynamic.conf')
dictActiveModules = {}
dictActiveModules['time'] = list()
dictActiveModules['Motiondetector'] = moduleDevice(20)
dictActiveModules['NetworkDeviceDetector'] = moduleDevice(30)
dictActiveModules['Webradio'] = moduleDevice(40)
dictActiveModules['Radiators'] = moduleDevice(60)
dictActiveModules['ledalarm'] = moduleDevice(90)
dictTemperature = {}
dictTemperature['time'] = list()
dictRelativeHumidity = {}
dictRelativeHumidity['time'] = list()
dictAbsoluteHumidity = {}
dictAbsoluteHumidity['time'] = list()
dictPressure = {}
dictPressure['time'] = list()
for vKey in dictSensors:
sSensorName = dictSensors[vKey].GetSensor()
dictTemperature[sSensorName] = moduleDevice(0)
dictRelativeHumidity[sSensorName] = moduleDevice(0)
dictAbsoluteHumidity[sSensorName] = moduleDevice(0)
if dictSensors[vKey].GetBME():
dictPressure[sSensorName] = moduleDevice(0)
if vVerbose == 'test':
print 'MAXTIME' + str(MAXTIME)
print 'MINTIME' + str(MINTIME)
print 'INTERVAL_SENSORS' + str(INTERVAL_SENSORS)
print 'INTERVAL_FRITZACTORS' + str(INTERVAL_FRITZACTORS)
print 'INTERVAL_WEBRADIO' + str(INTERVAL_WEBRADIO)
print 'INTERVAL_LANDEVICES' + str(INTERVAL_LANDEVICES)
print 'webradio_motionTimeOut' + str(webradio_motionTimeOut)
sleep(1)
# Config Variable leeren
sConfig = None
vBoolLC = True
# fritz off moved after first fritzactors call
degC = 0
hPa = 0
hRel = 0
degC1 = 0
hPa1 = 0
vBoolSensor1 = True
counterHigh = 0
counterLow = 0
timeDuration = 0
# functions for print out and WhatsApp
def getInfoText(vStatus):
vHeader = vTitel
if vVerbose.startswith('test'):
vHeader += ' Test\n'
else:
vHeader += '\n'
vNow = datetime.datetime.now().strftime('%Y-%m-%d %H:%M:%S') + ' ' + vStatus
vSensorPaket = ''
for vKey in dictSensors:
vSensorPaket += '\n ' + str(dictSensors[vKey].GetInfo(False, False))
vActorsPaket = ''
for vAKey in dictActors:
vActorsPaket += '\n' + str(dictActors[vAKey].GetInfo(False, False))
vGPIOStatus = ''
# vGPIOStatus += '\n Relais: ' + str(RadiatorStarted) + ' (' + str(RelayIN1.isOn) + '|' + str(RelayIN2.isOn) + ')'
vGPIOStatus += '\n Code: ' + str(timeDuration) + ';' + str(counterHigh) + ';' + str(counterLow)
# vGPIOStatus += '\n LED: ' + str(LedG.isOn) + str(LedY.isOn) + str(LedR.isOn)
vReturnText = vHeader + vNow + vSensorPaket + vActorsPaket + vGPIOStatus # + str(dictActors)
return vReturnText
# print CSV
# def getInfoCSV():
# vReturnText = datetime.datetime.now().strftime('%Y-%m-%d %H:%M:%S') + ';'
# vReturnText = vReturnText + str(RelaisStarted) + ';'
# vReturnText = vReturnText + str(timeDuration) + ';' + str(counterHigh) + ';' + str(counterLow) + ";"
# vReturnText = vReturnText + str(RelayIN1.isOn) + str(RelayIN2.isOn) + ";"
# vReturnText = vReturnText + str(LedG.isOn) + str(LedY.isOn) + str(LedR.isOn) + ";"
#
# for vKey in dictSensors:
# vReturnText = vReturnText + str(dictSensors[vKey].GetInfo(True, False))
# return vReturnText
# print html status output
def getHTML():
vhttpResult = ''
vhttpResult += 'echo "<DIV class=\\"sensor\\"><TABLE class=\\"sensor\\"><TR>\\n";\n'
vhttpResult += 'echo "<TD>\\n";\n'
for vKey in dictSensors:
vhttpResult += dictSensors[vKey].GetHttpTable()
vhttpResult += 'echo "</TD>\\n";\n'
vhttpResult += 'echo "<TD>\\n";\n'
for vKey in dictActiveModules:
if vKey <> 'time':
vhttpResult += dictActiveModules[vKey].GetHttpTable(vKey)
if modules_fritzactors:
for vAKey in dictActors:
vhttpResult += dictActors[vAKey].GetHttpTable()
vhttpResult += 'echo "</TD></TR></TABLE></DIV>\\n";\n'
return vhttpResult
# find out private ip address -------------------------------------------------
# ip = [(s.connect(('8.8.8.8', 80)), s.getsockname()[0], s.close()) for s in [socket.socket(socket.AF_INET, socket.SOCK_DGRAM)]][0][1]
# init -----------------------------------------------------------------------
# refresh for sensor data
refreshTime_sensors = time.time() + INTERVAL_SENSORS
# refresh for fritz actors
refreshTime_fritzactors = time.time()
refreshTime_webradio = time.time()
refreshTime_motiondetector = time.time()
# refresh for Queue
# if vVerbose.startswith('test'):
# INTERVAL_LANDEVICES = 3
refreshTime_LANDevices = time.time() + INTERVAL_LANDEVICES
qNDD = Queue.LifoQueue(maxsize=1)
DiscoveryInProgress = False
refreshTime_Queue = 5
INTERVAL_QUEUE = 5
refreshTime_webradioMotion = time.time() + webradio_motionTimeOut
qSensors = Queue.LifoQueue()
#qSensors = Queue.LifoQueue(maxsize=1)
thread.start_new_thread(threadSensors, (qSensors, vVerbose) )
if vVerbose.startswith('test'):
print 'MT: Starting Thread1.Sensors'
# FAInProgress = False
# qFA = Queue.LifoQueue(maxsize=1)
# loop ------------------------------------------------------------------------
#LedR.off()
if vVerbose.startswith('test1'):
print 'Config loaded'
print str(refreshTime_sensors) + '##' + str(time.time())
while time.strftime('%H%M') < MAXTIME:
# Check NDD Queue every INTERVAL_LANDEVICES secs
if time.time() > refreshTime_Queue:
if vVerbose.startswith('test'):
print str(time.time())+'while: refreshTime_Queue ('+str(refreshTime_Queue)+')'
if not qNDD.empty():
#dictNetDevs = {}
#dictNetDevs = qNDD.get()
boolNDD = qNDD.get()
LANDevices_Present = boolNDD
if vVerbose.startswith('test'):
print str(time.time())+'while: refreshTime_Queue: NDD (True) : LANDevices_Present ('+str(LANDevices_Present)+')'
qNDD.task_done()
DiscoveryInProgress = False
refreshTime_Queue = time.time() + INTERVAL_QUEUE
if time.time() > refreshTime_motiondetector:
if vVerbose.startswith('test1'):
print str(time.time())+'while: refreshTime_motiondetector ('+str(refreshTime_motiondetector)+')'
if modules_motiondetector:
if vVerbose.startswith('test1'):
print str(time.time())+'while: refreshTime_motiondetector: modules_motiondetector'
if BMelder.status() == 1:
motion_detected = True
motion_detected_report = True
else:
motion_detected = False
if vVerbose.startswith('test1'):
print str(time.time())+'while: refreshTime_motiondetector: modules_motiondetector: motion_detected_report('+str(motion_detected_report)+')'
if modules_surveillance and modules_motiondetector:
if vVerbose.startswith('test1'):
print str(time.time())+'while: refreshTime_motiondetector: modules_surveillance, modules_motiondetector'
if not LANDevices_Present:
if motion_detected:
threadPICAM2('surveillance')
sH_Log.Add(' surveillance take picset ')
else:
threadPICAM2('low')
sH_Log.Add(' surveillance take pic low ')
refreshTime_motiondetector = time.time() + 1
if time.time() > refreshTime_LANDevices:
if vVerbose.startswith('test1'):
print str(time.time())+'while: refreshTime_LANDevices ('+str(refreshTime_LANDevices)+')'
if modules_LANDevices:
if vVerbose.startswith('test1'):
print str(time.time())+'while: refreshTime_LANDevices: modules_LANDevices'
#parallel with threading and queue
if not DiscoveryInProgress:
if vVerbose.startswith('test1'):
print str(time.time())+'while: refreshTime_LANDevices: modules_LANDevices: Start Network Device Discovery!'
thread.start_new_thread(threadNetDiscovery, (qNDD, LANNetwork, dictMobileHosts) )
DiscoveryInProgress = True
else:
if vVerbose.startswith('test1'):
print 'Discovery running'
refreshTime_LANDevices = time.time() + INTERVAL_LANDEVICES
# get fritz actor data
if time.time() > refreshTime_fritzactors:
if vVerbose.startswith('test1'):
print str(time.time())+'while: refreshTime_fritzactors ('+str(refreshTime_fritzactors)+')'
if modules_fritzactors:
if vVerbose.startswith('test1'):
print str(time.time())+'while: refreshTime_fritzactors: modules_fritzactors'
dictActors = threadFritzActors2()
# On Startup stop running radiators
if vBoolLC:# and not FAInProgress:
dictActors[str(dictSensors[iControlSensor].GetFritzActor())].SetActor(False)
refreshTime_fritzactors = time.time() + INTERVAL_FRITZACTORS
# Check if there is a webradio setting change
if time.time() > refreshTime_webradio:
if vVerbose.startswith('test'):
print str(time.time())+'while: refreshTime_webradio ('+str(refreshTime_webradio)+')'
if modules_webradio:
if vVerbose.startswith('test'):
print str(time.time())+'while: refreshTime_webradio: modules_webradio'
(webradio_active1, webradio_changed, webradio_result) = threadWebradioService('/var/sensorTool/www/webradio.station', webradio_active)
if webradio_changed:
if webradio_active <> webradio_active1:
webradio_active = webradio_active1
sH_Log.Add(' Webradio change: ' + str(webradio_result))
elif not modules_webradio and webradio_active:
if vVerbose.startswith('test'):
print str(time.time())+'while: refreshTime_webradio: not modules_webradio, webradio_active'
(webradio_active, webradio_changed, webradio_result) = threadWebradioService('/var/sensorTool/www/webradio.station', webradio_active, True)
sH_Log.Add(' Webradio stopped')
if webradio_motionActive and not webradio_active and modules_webradio and modules_webradiomotion:
if vVerbose.startswith('test'):
print str(time.time())+'while: refreshTime_webradio: webradio_motionActive, webradio_active, modules_webradio, modules_webradiomotion'
refreshTime_webradioMotion = time.time() + webradio_motionTimeOut
(webradio_active, webradio_changed, webradio_result) = threadWebradioService('/var/sensorTool/www/webradio.station', webradio_active, False, True)
sH_Log.Add(' Webradio started')
refreshTime_webradio = time.time() + INTERVAL_WEBRADIO
#print 'time '+str(time.time())+'>'+str(refreshTime_webradioMotion)+' refreshTime_webradioMotion'
# Timeout for webradio - stop when no motion is detected (active motioncontrol)
if time.time() > refreshTime_webradioMotion:
if vVerbose.startswith('test'):
print str(time.time())+'while: refreshTime_webradioMotion ('+str(refreshTime_webradioMotion)+')'
#print str(time.time())+'while: refreshTime_webradioMotion: modules_webradio ('+str(modules_webradio)+'), modules_webradiomotion ('+str(modules_webradiomotion)+'), not webradio_motionActive('+str(webradio_motionActive)+')'
if modules_webradio and modules_webradiomotion and not webradio_motionActive and webradio_active:
if vVerbose.startswith('test'):
print str(time.time())+'while: refreshTime_webradioMotion: modules_webradio ('+str(modules_webradio)+'), modules_webradiomotion ('+str(modules_webradiomotion)+'), not webradio_motionActive('+str(webradio_motionActive)+'), webradio_active ('+str(webradio_active)+')'
(webradio_active, webradio_changed, webradio_result) = threadWebradioService('/var/sensorTool/www/webradio.station', webradio_active, True)
sH_Log.Add(' Webradio stopped, no motion')
refreshTime_webradioMotion = time.time() + INTERVAL_WEBRADIO
# every 10 seconds, try to send data to servers
if time.time() > refreshTime_sensors:
if vVerbose.startswith('test'):
print str(time.time())+'while: refreshTime_sensors ('+str(refreshTime_sensors)+')'
print str(refreshTime_sensors) + '##' + str(time.time())
# print str(refreshTime2) + '##' + str(time.time())
# Werte holen per http request ::D
try:
vR = None
if not in_q.empty():
vR = in_q.get()
in_q.task_done()
dictResponse = {}
dictResponse = ast.literal_eval(str(vR))
if vVerbose == 'test1':
print dictResponse
for vSensor in dictResponse:
dictTemp = {}
dictTemp['ID'] = vSensor
if 'Time' in dictResponse[vSensor]:
dictTemp['Time'] = dictResponse[vSensor]['Time']
if 'RH' in dictResponse[vSensor]:
dictTemp['RH'] = dictResponse[vSensor]['RH']
if 'T' in dictResponse[vSensor]:
dictTemp['T'] = dictResponse[vSensor]['T']
if 'hPa' in dictResponse[vSensor]:
dictTemp['hPa'] = dictResponse[vSensor]['hPa']
boolBME280 = False
if (vSensor == 'bme280') :
boolBME280 = True
for vKey in dictSensors:
if dictSensors[vKey].GetHex() == vSensor:
dictSensors[vKey].SetSensorData(dictTemp, boolBME280)
#DeviceMotion.SetSensorData(motion_detected_report)
if modules_webradiomotion:
if motion_detected_report:
# if motion detected than increase refreshTime_webradioMotion by webradio_motionTimeOut
webradio_motionActive = True
refreshTime_webradioMotion = time.time() + webradio_motionTimeOut
print refreshTime_webradioMotion
else:
# no motion detected, but mobile device present, webradio must be acticve
if modules_LANDevices and LANDevices_Present:
webradio_motionActive = True
refreshTime_webradioMotion = time.time() + webradio_motionTimeOut
print refreshTime_webradioMotion
else:
webradio_motionActive = False
# Values for Diagramm
sPlottingTime = str(datetime.datetime.now().strftime('%Y-%m-%d %H:%M:%S'))
dictTemperature['time'].append(sPlottingTime)
dictRelativeHumidity['time'].append(sPlottingTime)
dictAbsoluteHumidity['time'].append(sPlottingTime)
dictPressure['time'].append(sPlottingTime)
for vKey in dictSensors:
sSensorName = dictSensors[vKey].GetSensor()
dictTemperature[sSensorName].SetModuleValue(dictSensors[vKey].GetT())
dictRelativeHumidity[sSensorName] .SetModuleValue(dictSensors[vKey].GetRH())
dictAbsoluteHumidity[sSensorName].SetModuleValue(dictSensors[vKey].GetAH())
if dictSensors[vKey].GetBME():
dictPressure[sSensorName].SetModuleValue(dictSensors[vKey].GetPA())
dictActiveModules['time'].append(sPlottingTime)
dictActiveModules['Motiondetector'].SetModuleStatus(motion_detected_report)
dictActiveModules['NetworkDeviceDetector'].SetModuleStatus(LANDevices_Present)
dictActiveModules['Webradio'].SetModuleStatus(webradio_active)
dictActiveModules['Radiators'].SetModuleStatus(RadiatorStarted)
dictActiveModules['ledalarm'].SetModuleStatus(ledalarm)
motion_detected_report = False
ledalarm = False
except Exception as e:
sH_Log.Add(str(e))
print e
# pass
# ############### Dynamic Config Start ###################
# Dynamische Config einlesen #soll ueber http request gesteuert werden.
dynamicConf = ConfigParser.ConfigParser()
dynamicConf.read('/var/sensorTool/www/dynamic.conf')
# Try to change the Relais Status
try:
if vVerbose.startswith('test'):
print str(time.time())+'while: refreshTime_sensors: dynamicConf'
if dynamicConf.getboolean('modules', 'modules_radiators') != modules_radiators:
modules_radiators = dynamicConf.getboolean('modules', 'modules_radiators')
sH_Log.Add(' modules_radiators set to ' + str(modules_radiators))
if vVerbose.startswith('test'):
print str(time.time())+'while: refreshTime_sensors: dynamicConf: modules_radiators('+str(modules_radiators)+')'
if dynamicConf.getboolean('modules', 'modules_motiondetector') != modules_motiondetector:
modules_motiondetector = dynamicConf.getboolean('modules', 'modules_motiondetector')
sH_Log.Add(' modules_motiondetector set to ' + str(modules_motiondetector))
if not modules_motiondetector and motion_detected:
motion_detected = False
motion_detected_report = False
if vVerbose.startswith('test'):
print str(time.time())+'while: refreshTime_sensors: dynamicConf: modules_motiondetector('+str(modules_motiondetector)+')'
if dynamicConf.getboolean('modules', 'modules_surveillance') != modules_surveillance:
modules_surveillance = dynamicConf.getboolean('modules', 'modules_surveillance')
sH_Log.Add(' modules_surveillance set to ' + str(modules_surveillance))
if not modules_surveillance and motion_detected:
motion_detected = False
if vVerbose.startswith('test'):
print str(time.time())+'while: refreshTime_sensors: dynamicConf: modules_surveillance('+str(modules_surveillance)+')'
if modules_surveillance and not modules_motiondetector:
sH_Log.Add(' modules_motiondetector set to ' + str(modules_motiondetector))
modules_motiondetector = True
if vVerbose.startswith('test'):
print str(time.time())+'while: refreshTime_sensors: dynamicConf: modules_surveillance: modules_motiondetector('+str(modules_motiondetector)+')'
if dynamicConf.getboolean('modules', 'modules_relais') != modules_relais:
modules_relais = dynamicConf.getboolean('modules', 'modules_relais')
sH_Log.Add(' modules_relais set to ' + str(modules_relais))
if vVerbose.startswith('test'):
print str(time.time())+'while: refreshTime_sensors: dynamicConf: modules_relais('+str(modules_relais)+')'
if dynamicConf.getboolean('modules', 'modules_fritzactors') != modules_fritzactors:
modules_fritzactors = dynamicConf.getboolean('modules', 'modules_fritzactors')
sH_Log.Add(' modules_fritzactors set to ' + str(modules_fritzactors))
if vVerbose.startswith('test'):
print str(time.time())+'while: refreshTime_sensors: dynamicConf: modules_fritzactors('+str(modules_fritzactors)+')'
if dynamicConf.getboolean('modules', 'modules_LANDevices') != modules_LANDevices:
modules_LANDevices = dynamicConf.getboolean('modules', 'modules_LANDevices')
sH_Log.Add(' modules_LANDevices set to ' + str(modules_LANDevices))
if not modules_LANDevices and LANDevices_Present:
LANDevices_Present = False
if vVerbose.startswith('test'):
print str(time.time())+'while: refreshTime_sensors: dynamicConf: modules_LANDevices('+str(modules_LANDevices)+')'
if dynamicConf.getboolean('modules', 'modules_webradio') != modules_webradio:
modules_webradio = dynamicConf.getboolean('modules', 'modules_webradio')
sH_Log.Add(' modules_webradio set to ' + str(modules_webradio))
if vVerbose.startswith('test'):
print str(time.time())+'while: refreshTime_sensors: dynamicConf: modules_webradio('+str(modules_webradio)+')'
if dynamicConf.getboolean('modules', 'modules_webradiomotion') != modules_webradiomotion:
modules_webradiomotion = dynamicConf.getboolean('modules', 'modules_webradiomotion')
sH_Log.Add(' modules_webradiomotion set to ' + str(modules_webradiomotion))
if not modules_webradiomotion and not webradio_motionActive:
webradio_motionActive = True
if vVerbose.startswith('test'):
print str(time.time())+'while: refreshTime_sensors: dynamicConf: modules_webradiomotion('+str(modules_webradiomotion)+')'
if modules_webradiomotion and not modules_webradio:
sH_Log.Add(' modules_webradio set to ' + str(modules_webradio))
modules_webradio = True
if vVerbose.startswith('test'):
print str(time.time())+'while: refreshTime_sensors: dynamicConf: modules_webradiomotion: modules_webradio('+str(modules_webradio)+')'
except Exception as e:
sH_Log.Add(str(e))
print e
pass
# iterate through sensor data
for vKey in dictSensors:
try:
vSetHighRH = False
if dictSensors[vKey].GetThresholdHighHumidity() == False:
vSetHighRH = True
elif dynamicConf.getfloat('Sensor' + str(vKey), 'threshold_high_humidity') != dictSensors[vKey].GetThresholdHighHumidity():
vSetHighRH = True
if vSetHighRH:
dictSensors[vKey].SetThresholdHighHumidity(dynamicConf.getfloat('Sensor' + str(vKey), 'threshold_high_humidity'))
sH_Log.Add('Threshold High RH S' + str(vKey) + ':' + str(dictSensors[vKey].GetThresholdHighHumidity()))
if vVerbose.startswith('test'):
print 'Threshold High RH S' + str(vKey) + ':' + str(dictSensors[vKey].GetThresholdHighHumidity())
except:
pass # Exception, e:
try:
vSetLowT = False
if dictSensors[vKey].GetThresholdLowTemperature() == False:
vSetLowT = True
elif dynamicConf.getfloat('Sensor' + str(vKey), 'threshold_low_temperature') != dictSensors[vKey].GetThresholdLowTemperature():
vSetLowT = True
if vSetHighRH:
dictSensors[vKey].SetThresholdLowTemperature(dynamicConf.getfloat('Sensor' + str(vKey), 'threshold_low_temperature'))
sH_Log.Add('Threshold Low T S' + str(vKey) + ':' + str(dictSensors[vKey].GetThresholdLowTemperature()))
if vVerbose == 'test':
print 'Threshold Low T S' + str(vKey) + ':' + str(dictSensors[vKey].GetThresholdLowTemperature())
except:
pass # Exception, e:
# ############### Dynamic Config Ende ###################
if vBoolLC == True:
sendWhatsApps(dictSensors[iControlSensor].GetMobiles(), getInfoText("Active"))
sH_Log.Add('sensorTool started')
#LedY.off()
vBoolLC = False
# ############### Check for Radiator interval start ##################
vBoolInterval = dictInterval.isNowInInterval()
# ############### Check for Radiator interval Ende ##################
if vVerbose.startswith('test1'):
print( 'Threshold: ' + str(dictSensors[iControlSensor].GetThreshold()) + ' RadiatorStarted: ' + str(RadiatorStarted) + ' vBoolInterval: ' + str(vBoolInterval) +' modules_radiators: ' + str(modules_radiators))
boolTriggerOutdoor = True
if boolOutdoorSensor:
deltaAH = 0.5
if dictSensors[iControlSensor].GetAH() is not None and dictSensors[iOutdoorSensor].GetAH() is not None:
if (float(dictSensors[iControlSensor].GetAH())) < (float(dictSensors[iOutdoorSensor].GetAH())+ deltaAH):
boolTriggerOutdoor = False
if dictSensors[iControlSensor].GetThreshold() and RadiatorStarted == False and vBoolInterval and modules_radiators and boolTriggerOutdoor:
counterHigh = counterHigh + 1
#if LedY.isOn == False:
# LedY.on()
# sH_Log.Add(dictSensors[iControlSensor].GetSensor() + ' Yellow LED (H)!')
else:
counterHigh = 0
if dictSensors[iControlSensor].GetThreshold() == False and RadiatorStarted and vBoolInterval and modules_radiators and boolTriggerOutdoor:
counterLow = counterLow + 1
#if LedY.isOn == False:
# LedY.on()
# sH_Log.Add(dictSensors[iControlSensor].GetSensor() + ' Yellow LED (L)!')
else:
counterLow = 0
if vVerbose.startswith('test1'):
print( 'counterLow: ' + str(counterLow) + ' counterHigh: ' + str(counterHigh) )
boolInfoLight = False
# Alle anderen Sensoren (außer Keller) durchgehen
for vKey in dictSensors:
# if dictSensors[vKey].GetBME() != True:
if iControlSensor <> vKey:
vBoolThreshold = dictSensors[vKey].GetThreshold()
# Grenzwert
if vBoolThreshold and dictSensors[vKey].GetSendMessage():
sendWhatsApps(dictSensors[vKey].GetMobiles(), dictSensors[vKey].GetMessage())
dictSensors[vKey].SetSendMessage(False)
sH_Log.Add(dictSensors[vKey].GetSensor() + dictSensors[vKey].GetMessage())
boolInfoLight = True
elif dictSensors[vKey].GetSendMessage() == False:
dictSensors[vKey].SetSendMessage(True)
# Delta
vBoolDelta = dictSensors[vKey].GetDelta()
counterDelta = dictSensors[vKey].GetDeltaCounter()
if vBoolDelta and dictSensors[vKey].GetDeltaCounter() == 0:
dictSensors[vKey].SetDeltaCounter(counterDelta + 1)
elif counterDelta > 0:
if counterDelta > dictSensors[vKey].GetTriggerCount():
sendWhatsApps(dictSensors[vKey].GetMobiles(), dictSensors[vKey].GetDeltaMessage())
sH_Log.Add(dictSensors[vKey].GetDeltaMessage())
dictSensors[vKey].SetDeltaCounter(0)
boolInfoLight = True
else:
dictSensors[vKey].SetDeltaCounter(counterDelta + 1)
if boolInfoLight:
if not boolLeuchte:
boolLeuchte = Leuchte.activate(boolLeuchte)
ledalarm = True
else:
if boolLeuchte:
boolLeuchte = Leuchte.deactivate(boolLeuchte)
if counterHigh == TriggerCountA and RadiatorStarted == False and vBoolInterval and modules_radiators and boolTriggerOutdoor:
dictActors[dictSensors[iControlSensor].GetFritzActor()].SetActor(True)
#LedR.on()
#LedY.off()
RadiatorStarted = True
sendWhatsApps(dictSensors[iControlSensor].GetMobiles(), getInfoText("Started"))
sH_Log.Add('Radiator activated')
elif (counterLow == TriggerCountB or vBoolInterval == False or modules_radiators == False or boolTriggerOutdoor == False) and RadiatorStarted:
dictActors[dictSensors[iControlSensor].GetFritzActor()].SetActor(False)
#LedR.off()
#LedY.off()
RadiatorStarted = False
sendWhatsApps(dictSensors[iControlSensor].GetMobiles(), getInfoText("Stopped"))
sH_Log.Add('Radiator deactivated')
if vVerbose.startswith('test'):
#print getInfoText("Status")
print '##### - #####'
threadCreatePHPFile('/var/sensorTool/www/sensor.php', getHTML())
# thread.start_new_thread(threadCreatePHPFile, ('/var/sensorTool/www/sensor.php', getHTML(),))
plotting_DeviceValues(dictActiveModules, '1_Modules', vVerbose)
plotting_DeviceValues(dictTemperature, '3_Temperature', vVerbose, -20, 50)
plotting_DeviceValues(dictRelativeHumidity, '4_Relative_Humidity', vVerbose)
plotting_DeviceValues(dictAbsoluteHumidity, '2_Absolute_Humidity', vVerbose, 0, 30)
plotting_DeviceValues(dictPressure, '9_Pressure', vVerbose, 700, 1100)
# thread.start_new_thread(plotting, (dictPlotSens, dictPlotAussen, vVerbose,))
refreshTime_sensors = time.time() + INTERVAL_SENSORS
sleep(1) # 0.1
if RadiatorStarted:
dictActors[dictSensors[iControlSensor].GetFritzActor()].SetActor(False)
sendWhatsApps(dictSensors[iControlSensor].GetMobiles(), getInfoText("Inactive - going down"))
if vVerbose.startswith('test'):
print 'GPIO Down'
#LedY.off()
#LedR.off()
#LedG.off()
if boolLeuchte:
Leuchte.deactivate(boolLeuchte)
if not vVerbose.startswith('test'):
os.system("sudo init 0")
else:
print ' - Ende - '
# vim: tabstop=8 expandtab shiftwidth=4 softtabstop=4