def dump_to_vtk(filename, output_filename_trunk=None, step0=0, steps=None,
fields=None, linearization=None):
"""Dump a multi-time-step results file into a sequence of VTK files."""
def _save_step(suffix, out, mesh):
if linearization is not None:
output('linearizing...')
out = _linearize(out, fields, linearization)
output('...done')
for key, val in out.iteritems():
lmesh = val.get('mesh', mesh)
lmesh.write(output_filename_trunk + '_' + key + suffix,
io='auto', out={key : val})
if hasattr(val, 'levels'):
output('max. refinement per group:', val.levels)
else:
mesh.write(output_filename_trunk + suffix, io='auto', out=out)
output('dumping to VTK...')
io = MeshIO.any_from_filename(filename)
mesh = Mesh.from_file(filename, io=io)
if output_filename_trunk is None:
output_filename_trunk = get_trunk(filename)
try:
ts = TimeStepper(*io.read_time_stepper())
times, nts, dts = extract_times(filename)
except ValueError:
output('no time stepping info found, assuming single step')
out = io.read_data(0)
if out is not None:
_save_step('.vtk', out, mesh)
ret = None
else:
ts.times = times
ts.n_step = times.shape[0]
if steps is None:
iterator = ts.iter_from(step0)
else:
iterator = [(step, ts.times[step]) for step in steps]
for step, time in iterator:
output(ts.format % (step, ts.n_step - 1))
out = io.read_data(step)
if out is None: break
_save_step('.' + ts.suffix % step + '.vtk', out, mesh)
ret = ts.suffix
output('...done')
return ret
def dump_to_vtk(filename, output_filename_trunk=None, step0=0, steps=None,
fields=None, linearization=None):
"""Dump a multi-time-step results file into a sequence of VTK files."""
def _save_step(suffix, out, mesh):
if linearization is not None:
output('linearizing...')
out = _linearize(out, fields, linearization)
output('...done')
for key, val in out.iteritems():
lmesh = val.get('mesh', mesh)
lmesh.write(output_filename_trunk + '_' + key + suffix,
io='auto', out={key : val})
if hasattr(val, 'levels'):
output('max. refinement per group:', val.levels)
else:
mesh.write(output_filename_trunk + suffix, io='auto', out=out)
output('dumping to VTK...')
io = MeshIO.any_from_filename(filename)
mesh = Mesh.from_file(filename, io=io)
if output_filename_trunk is None:
output_filename_trunk = get_trunk(filename)
try:
ts = TimeStepper(*io.read_time_stepper())
all_steps, times, nts, dts = extract_times(filename)
except ValueError:
output('no time stepping info found, assuming single step')
out = io.read_data(0)
if out is not None:
_save_step('.vtk', out, mesh)
ret = None
else:
ts.times = times
ts.n_step = times.shape[0]
if steps is None:
ii0 = nm.searchsorted(all_steps, step0)
iterator = ((all_steps[ii], times[ii])
for ii in xrange(ii0, len(times)))
else:
iterator = [(step, ts.times[step]) for step in steps]
max_step = all_steps.max()
for step, time in iterator:
output(ts.format % (step, max_step))
out = io.read_data(step)
if out is None: break
_save_step('.' + ts.suffix % step + '.vtk', out, mesh)
ret = ts.suffix
output('...done')
return ret
def extract_time_history(filename, extract, verbose=True):
"""Extract time history of a variable from a multi-time-step results file.
Parameters
----------
filename : str
The name of file to extract from.
extract : str
The description of what to extract in a string of comma-separated
description items. A description item consists of: name of the variable
to extract, mode ('e' for elements, 'n' for nodes), ids of the nodes or
elements (given by the mode). Example: 'u n 10 15, p e 0' means
variable 'u' in nodes 10, 15 and variable 'p' in element 0.
verbose : bool
Verbosity control.
Returns
-------
ths : dict
The time histories in a dict with variable names as keys. If a nodal
variable is requested in elements, its value is a dict of histories in
the element nodes.
ts : TimeStepper instance
The time stepping information.
"""
output('extracting selected data...', verbose=verbose)
output('selection:', extract, verbose=verbose)
##
# Parse extractions.
pes = OneTypeList(Struct)
for chunk in extract.split(','):
aux = chunk.strip().split()
pes.append(Struct(var=aux[0], mode=aux[1], indx=map(int, aux[2:])))
##
# Verify array limits.
mesh = Mesh.from_file(filename)
for pe in pes:
if pe.mode == 'n':
for ii in pe.indx:
if (ii < 0) or (ii >= mesh.n_nod):
raise ValueError('node index 0 <= %d < %d!' %
(ii, mesh.n_nod))
if pe.mode == 'e':
for ii, ie in enumerate(pe.indx[:]):
if (ie < 0) or (ie >= mesh.n_el):
raise ValueError('element index 0 <= %d < %d!' %
(ie, mesh.n_el))
pe.indx[ii] = ie
##
# Extract data.
io = MeshIO.any_from_filename(filename)
ths = {}
for pe in pes:
mode, nname = io.read_data_header(pe.var)
output(mode, nname, verbose=verbose)
if ((pe.mode == 'n' and mode == 'vertex')
or (pe.mode == 'e' and mode == 'cell')):
th = io.read_time_history(nname, pe.indx)
elif pe.mode == 'e' and mode == 'vertex':
conn = mesh.conns[0]
th = {}
for iel in pe.indx:
ips = conn[iel]
th[iel] = io.read_time_history(nname, ips)
else:
raise ValueError('cannot extract cell data %s in nodes!' % pe.var)
ths[pe.var] = th
output('...done', verbose=verbose)
ts = TimeStepper(*io.read_time_stepper())
# Force actual times.
steps, times, nts, dts = extract_times(filename)
ts.times = times
ts.nt = nts
return ths, ts
def extract_time_history(filename, extract, verbose=True):
"""Extract time history of a variable from a multi-time-step results file.
Parameters
----------
filename : str
The name of file to extract from.
extract : str
The description of what to extract in a string of comma-separated
description items. A description item consists of: name of the variable
to extract, mode ('e' for elements, 'n' for nodes), ids of the nodes or
elements (given by the mode). Example: 'u n 10 15, p e 0' means
variable 'u' in nodes 10, 15 and variable 'p' in element 0.
verbose : bool
Verbosity control.
Returns
-------
ths : dict
The time histories in a dict with variable names as keys. If a nodal
variable is requested in elements, its value is a dict of histories in
the element nodes.
ts : TimeStepper instance
The time stepping information.
"""
output('extracting selected data...', verbose=verbose)
output('selection:', extract, verbose=verbose)
##
# Parse extractions.
pes = OneTypeList(Struct)
for chunk in extract.split(','):
aux = chunk.strip().split()
pes.append(Struct(var=aux[0],
mode=aux[1],
indx=map(int, aux[2:])))
##
# Verify array limits.
mesh = Mesh.from_file(filename)
for pe in pes:
if pe.mode == 'n':
for ii in pe.indx:
if (ii < 0) or (ii >= mesh.n_nod):
raise ValueError('node index 0 <= %d < %d!'
% (ii, mesh.n_nod))
if pe.mode == 'e':
for ii, ie in enumerate(pe.indx[:]):
if (ie < 0) or (ie >= mesh.n_el):
raise ValueError('element index 0 <= %d < %d!'
% (ie, mesh.n_el))
pe.indx[ii] = ie
##
# Extract data.
io = MeshIO.any_from_filename(filename)
ths = {}
for pe in pes:
mode, nname = io.read_data_header(pe.var)
output(mode, nname, verbose=verbose)
if ((pe.mode == 'n' and mode == 'vertex') or
(pe.mode == 'e' and mode == 'cell')):
th = io.read_time_history(nname, pe.indx)
elif pe.mode == 'e' and mode == 'vertex':
conn = mesh.conns[0]
th = {}
for iel in pe.indx:
ips = conn[iel]
th[iel] = io.read_time_history(nname, ips)
else:
raise ValueError('cannot extract cell data %s in nodes!' % pe.var)
ths[pe.var] = th
output('...done', verbose=verbose)
ts = TimeStepper(*io.read_time_stepper())
# Force actual times.
steps, times, nts, dts = extract_times(filename)
ts.times = times
ts.nt = nts
return ths, ts
