def zbxsend(connectnum):
zbx_host = getiniConfig.getConfig('/tools/config/nsconfig',
'monitorlinenumber.ini', 'zabbixConfig',
'zbx_host')
zbx_port = int(
getiniConfig.getConfig('/tools/config/nsconfig',
'monitorlinenumber.ini', 'zabbixConfig',
'zbx_port'))
zbx_host = eval(zbx_host)
innerIP = str(get_ip_address('eth1'))
innerIPPart = '.'.join(innerIP.split('.')[0:-1])
zbx_ip = ''
for host in zbx_host:
for inIP in host['innerIP']:
inIP = '.'.join(inIP.split('.')[0:-1])
if innerIPPart == inIP:
zbx_ip = host['zbx_ip']
continue
if not zbx_ip:
zbx_ip = "127.0.0.1"
zbxdata = []
zbxdata.append({
"host": str(get_ip_address('eth1')),
"key": "monitor_linenumber.status",
"value": int(connectnum)
})
zbxsender = zabbix_sender(zbx_ip, zbx_port)
zbxsender.send(zbxdata, datarecv_print)
getiniConfig.write_config('/home/config', 'monitorNewlinenumber.ini',
'lastNumConfig', 'lastLineNum', str(connectnum))
def line(socketconfig='/tools/config/nsconfig/collect.ini:line',
port='2888[0-6]'):
try:
logName = 'lineNum' + str(
time.strftime('%Y%m%d', time.localtime(time.time())))
log = getLogger(logName)
area, group, oid, ctime = gethostinfo()
connectnum = getconnectnum(port)
connectnum_json = {
'zone': area,
'group': group,
'time': ctime,
'num': connectnum,
'oid': oid
}
lastLineNum = getiniConfig.getConfig('/tools/config/nsconfig',
'monitorlinenumber.ini',
'lastNumConfig', 'lastLineNum')
if str(lastLineNum) == '0':
getiniConfig.write_config('/tools/config/nsconfig',
'monitorlinenumber.ini', 'lastNumConfig',
'lastLineNum', str(connectnum))
else:
zbxsend(connectnum)
log.info(str(connectnum_json))
except Exception, e:
log.error("monitor line error: %s" % str(e))
try:
connectnum = getconnectnum(port)
zbxsend(connectnum)
except Exception, e:
log.error("monitor line error: %s" % str(e))
def line(socketconfig='/tools/config/nsconfig/collectNew.ini:line',port='2888[0-6]'):
try:
connectnum_json = ''
connectnum = '1'
logName = 'lineNum'+str(time.strftime('%Y%m%d',time.localtime(time.time())))
log = getLogger(logName)
area,group,oid,ctime = gethostinfo()
connectnum = getconnectnum(port)
headJson = ''
senderNodeId,logTime,limitNum,headJson = getNodeIdAndType('line','')
if senderNodeId:
connectnum_json = headJson+'''{"zone":"%s","group":"%s","time":"%s","num":"%s","oid":"%s"}}'''
connectnum_json = connectnum_json %(
str(senderNodeId),str(logTime),str(limitNum),'p1-line','1',str(area),str(group),str(ctime),str(connectnum),str(oid)
)
#print connectnum_json,' dddd'
# connectnum_json = {'zone':area,'group':group,'time':ctime,'num':connectnum,'oid':oid}
lastLineNum = getiniConfig.getConfig('/home/config','monitorNewlinenumber.ini','lastNumConfig','lastLineNum')
if str(lastLineNum) == '0':
getiniConfig.write_config('/home/config','monitorNewlinenumber.ini','lastNumConfig','lastLineNum',str(connectnum))
else:
zbxsend(connectnum)
log.info('Newinfo :'+str(connectnum_json))
except Exception,e:
print str(e)
log.error("monitor lineNew error: %s, onlineNum is %s"%(str(e),str(connectnum)))
try:
connectnum = getconnectnum(port)
zbxsend(connectnum)
except Exception,e:
log.error("monitor lineNew error1: %s"%str(e))
def send_zabbix(zbxdata=[]):
zbx_host = getiniConfig.getConfig('/tools/config/nsconfig',
'monitorlinenumber.ini', 'zabbixConfig',
'zbx_host')
zbx_port = int(
getiniConfig.getConfig('/tools/config/nsconfig',
'monitorlinenumber.ini', 'zabbixConfig',
'zbx_port'))
zbx_hosts = eval(zbx_host)
innerIP = str(get_ip_address('eth1'))
innerIPPart = '.'.join(innerIP.split('.')[0:-1])
zbx_ip = ''
for host in zbx_hosts:
for inIP in host['innerIP']:
inIP = '.'.join(inIP.split('.')[0:-1])
if innerIPPart == inIP:
zbx_ip = host['zbx_ip']
continue
if not zbx_ip:
zbx_ip = "127.0.0.1"
zbxsender = zabbix_sender(zbx_ip, zbx_port)
zbxsender.send(zbxdata, datarecv_print)
def line(port='2888[0-6]'):
try:
connectnum = getconnectnum(port)
endtime = datetime.datetime.now()
lastLineNum = getiniConfig.getConfig('/home/config',
'monitoronline.ini',
'lastNumConfig', 'lastLineNum')
if not int(lastLineNum):
getiniConfig.write_config('/home/config', 'monitoronline.ini',
'lastNumConfig', 'lastLineNum',
str(connectnum))
getiniConfig.write_config('/home/config', 'monitoronline.ini',
'lastNumConfig', 'starttime',
str(endtime))
getiniConfig.write_config('/home/config', 'monitoronline.ini',
'lastNumConfig', 'deltatime1', '0')
getiniConfig.write_config('/home/config', 'monitoronline.ini',
'lastNumConfig', 'deltatime2', '0')
else:
starttime_str = getiniConfig.getConfig('/home/config',
'monitoronline.ini',
'lastNumConfig',
'starttime')
starttime = datetime.datetime(
*time.strptime(starttime_str[:19], "%Y-%m-%d %H:%M:%S")[:6])
if int(connectnum) - int(lastLineNum) > 500:
print '在线人数突然上升大于500人'
time_delta = endtime - starttime
if int(time_delta.seconds) < 300: #时间差小于5分钟，每次发送
print '5分钟内间隔一分钟报警!'
zbxsend(1)
elif int(time_delta.seconds) < 1800: #时间差大于5分钟小于30分钟，每5分钟发送报警
deltatime = getiniConfig.getConfig('/home/config',
'monitoronline.ini',
'lastNumConfig',
'deltatime1')
if deltatime != '0':
starttime = datetime.datetime(*time.strptime(
deltatime[:19], "%Y-%m-%d %H:%M:%S")[:6])
time_delta = endtime - starttime
if int(time_delta.seconds) > 300:
print '时间差大于5分钟小于30分钟，每5分钟发送报警'
zbxsend(1)
getiniConfig.write_config('/home/config',
'monitoronline.ini',
'lastNumConfig',
'deltatime1',
str(endtime))
else:
print '时间差大于5分钟小于30分钟，没有超过5分钟不发送报警'
zbxsend(0)
else:
print '时间差大于5分钟小于30分钟,第一次报警'
zbxsend(1)
getiniConfig.write_config('/home/config',
'monitoronline.ini',
'lastNumConfig',
'deltatime1', str(endtime))
elif int(
time_delta.seconds) < 3600: #时间差大于30分钟小于60分钟，每10分钟发送报警
deltatime = getiniConfig.getConfig('/home/config',
'monitoronline.ini',
'lastNumConfig',
'deltatime2')
if deltatime:
starttime = datetime.datetime(*time.strptime(
deltatime[:19], "%Y-%m-%d %H:%M:%S")[:6])
time_delta = endtime - starttime
if int(time_delta.seconds) > 600:
print '时间差大于30分钟小于60分钟，每10分钟发送报警'
zbxsend(1)
getiniConfig.write_config('/home/config',
'monitoronline.ini',
'lastNumConfig',
'deltatime2',
str(endtime))
else:
print '时间差大于30分钟小于60分钟，没有超过10分钟不发送报警'
zbxsend(0)
else:
print '时间差大于30分钟小于60分钟,第一次报警'
zbxsend(1)
getiniConfig.write_config('/home/config',
'monitoronline.ini',
'lastNumConfig',
'deltatime2', str(endtime))
else: #时间差大于60分钟，不报警
print '时间差大于60分钟，不报警'
zbxsend(0)
getiniConfig.write_config('/home/config', 'monitoronline.ini',
'lastNumConfig', 'lastLineNum',
str(connectnum))
elif abs(int(connectnum) - int(lastLineNum)) > 0:
print '人数监控正常'
zbxsend(0)
getiniConfig.write_config('/home/config', 'monitoronline.ini',
'lastNumConfig', 'lastLineNum',
str(connectnum))
getiniConfig.write_config('/home/config', 'monitoronline.ini',
'lastNumConfig', 'starttime',
str(endtime))
getiniConfig.write_config('/home/config', 'monitoronline.ini',
'lastNumConfig', 'deltatime1', '0')
getiniConfig.write_config('/home/config', 'monitoronline.ini',
'lastNumConfig', 'deltatime2', '0')
return
if int(connectnum) - int(lastLineNum) < -200:
print '在线人数下降大于200人'
time_delta = endtime - starttime
if int(time_delta.seconds) < 300: #时间差小于5分钟，每次发送
print '5分钟内间隔一分钟报警!'
zbxsend(2)
elif int(time_delta.seconds) < 1800: #时间差大于5分钟小于30分钟，每5分钟发送报警
deltatime = getiniConfig.getConfig('/home/config',
'monitoronline.ini',
'lastNumConfig',
'deltatime1')
if deltatime != '0':
starttime = datetime.datetime(*time.strptime(
deltatime[:19], "%Y-%m-%d %H:%M:%S")[:6])
time_delta = endtime - starttime
if int(time_delta.seconds) > 300:
print '时间差大于5分钟小于30分钟，每5分钟发送报警'
zbxsend(2)
getiniConfig.write_config('/home/config',
'monitoronline.ini',
'lastNumConfig',
'deltatime1',
str(endtime))
else:
print '时间差大于5分钟小于30分钟，没有超过5分钟不发送报警'
zbxsend(0)
else:
print '时间差大于5分钟小于30分钟,第一次报警'
zbxsend(2)
getiniConfig.write_config('/home/config',
'monitoronline.ini',
'lastNumConfig',
'deltatime1', str(endtime))
elif int(
time_delta.seconds) < 3600: #时间差大于30分钟小于60分钟，每10分钟发送报警
deltatime = getiniConfig.getConfig('/home/config',
'monitoronline.ini',
'lastNumConfig',
'deltatime2')
if deltatime:
starttime = datetime.datetime(*time.strptime(
deltatime[:19], "%Y-%m-%d %H:%M:%S")[:6])
time_delta = endtime - starttime
if int(time_delta.seconds) > 600:
print '时间差大于30分钟小于60分钟，每10分钟发送报警'
zbxsend(2)
getiniConfig.write_config('/home/config',
'monitoronline.ini',
'lastNumConfig',
'deltatime2',
str(endtime))
else:
print '时间差大于30分钟小于60分钟，没有超过10分钟不发送报警'
zbxsend(0)
else:
print '时间差大于30分钟小于60分钟,第一次报警'
zbxsend(2)
getiniConfig.write_config('/home/config',
'monitoronline.ini',
'lastNumConfig',
'deltatime2', str(endtime))
else: #时间差大于60分钟，不报警
print '时间差大于60分钟，不报警'
zbxsend(0)
getiniConfig.write_config('/home/config', 'monitoronline.ini',
'lastNumConfig', 'lastLineNum',
str(connectnum))
elif int(connectnum) - int(lastLineNum) <= 0:
print '人数监控正常'
zbxsend(0)
getiniConfig.write_config('/home/config', 'monitoronline.ini',
'lastNumConfig', 'lastLineNum',
str(connectnum))
getiniConfig.write_config('/home/config', 'monitoronline.ini',
'lastNumConfig', 'starttime',
str(endtime))
getiniConfig.write_config('/home/config', 'monitoronline.ini',
'lastNumConfig', 'deltatime1', '0')
getiniConfig.write_config('/home/config', 'monitoronline.ini',
'lastNumConfig', 'deltatime2', '0')
except Exception, e:
print str(e)