def _fit_sherpa(self):
"""Wrapper around sherpa minimizer."""
from sherpa.fit import Fit
from sherpa.data import Data1DInt
from sherpa.optmethods import NelderMead
from .sherpa_utils import SherpaModel, SherpaStat
binning = self.obs_list[0].e_reco
# The sherpa data object is not usued in the fit. It is set to the
# first observation for debugging purposes, see below
data = self.obs_list[0].on_vector.data.data.value
data = Data1DInt('Dummy data', binning[:-1].value, binning[1:].value,
data)
# DEBUG
# from sherpa.models import PowLaw1D
# from sherpa.stats import Cash
# model = PowLaw1D('sherpa')
# model.ref = 0.1
# fit = Fit(data, model, Cash(), NelderMead())
# NOTE: We cannot use the Levenbergr-Marquart optimizer in Sherpa
# because it relies on the fvec return value of the fit statistic (we
# return None). The computation of fvec is not straightforwad, not just
# stats per bin. E.g. for a cash fit the sherpa stat computes it
# according to cstat
# see https://github.com/sherpa/sherpa/blob/master/sherpa/include/sherpa/stats.hh#L122
self._sherpa_fit = Fit(data, SherpaModel(self), SherpaStat(self),
NelderMead())
fitresult = self._sherpa_fit.fit()
log.debug(fitresult)
self._make_fit_result(self.model.parameters)
def setup_data(elo=0.1, ehi=10.0, ebin=0.01):
"""Return a data set.
Parameters
----------
elo, ehi : number, optional
The start and end energy of the grid, in keV.
ebin : number, optional
The bin width, in keV.
Returns
-------
data : Data1DInt
The data object. The Y values are not expected to be used,
so are set to 1.
"""
if elo >= ehi:
raise ValueError("elo >= ehi")
if elo <= 0:
raise ValueError("elo <= 0")
if ebin <= 0:
raise ValueError("ebin <= 0")
x = np.arange(elo, ehi + ebin, ebin)
if x.size < 2:
raise ValueError("elo, ehi, ebin not sensible")
y = np.ones(x.size - 1)
return Data1DInt('dummy', x[:-1], x[1:], y)
def make_data(data_class):
"""Create a test data object of the given class.
Using a string means it is easier to support the various PHA
"types" - eg basic, grouping, grouping+quality.
"""
x0 = np.asarray([1, 3, 7, 12])
y = np.asarray([2, 3, 4, 5])
if data_class == "1d":
return Data1D('x1', x0, y)
if data_class == "1dint":
return Data1DInt('xint1', x0, np.asarray([3, 5, 8, 15]), y)
chans = np.arange(1, 5)
if data_class == "pha":
return DataPHA('pha', chans, y)
# We want to provide PHA tests that check out the grouping and
# quality handling (but it is not worth trying all different
# variants), so we have "grp" for grouping and no quality [*], and
# "qual" for grouping and quality.
#
# [*] by which I mean we have not called ignore_bad, not that
# there is no quality array.
#
grp = np.asarray([1, -1, 1, 1])
qual = np.asarray([0, 0, 2, 0])
pha = DataPHA('pha', chans, y, grouping=grp, quality=qual)
if data_class == "grp":
return pha
if data_class == "qual":
pha.ignore_bad()
return pha
x0 = np.asarray([1, 2, 3] * 2)
x1 = np.asarray([1, 1, 1, 2, 2, 2])
y = np.asarray([2, 3, 4, 5, 6, 7])
if data_class == "2d":
return Data2D('x2', x0, x1, y, shape=(2, 3))
if data_class == "2dint":
return Data2DInt('xint2', x0, x1, x0 + 1, x1 + 1, y, shape=(2, 3))
if data_class == "img":
return DataIMG('img', x0, x1, y, shape=(2, 3))
if data_class == "imgint":
return DataIMGInt('imgi', x0, x1, x0 + 1, x1 + 1, y, shape=(2, 3))
assert False
def test_histogram_can_not_set_x():
"""We cannot change the x accessor"""
xlo = [10, 20, 40, 80]
xhi = [20, 40, 60, 90]
y = [1, 2, 3, 4]
d = Data1DInt('xx', xlo, xhi, y)
dp = sherpaplot.DataHistogramPlot()
dp.prepare(d)
with pytest.raises(AttributeError):
dp.x = xlo
def test_low_level_regrid1d_non_overlapping_not_allowed():
"""Integrated data space must not overlap"""
tmp = np.linspace(1, 100, 10)
y = np.ones((9, ))
d = Data1DInt('tst', tmp[:-1], tmp[1:], np.ones((9, )))
c = Box1D()
lo = np.linspace(1, 100, 600)
hi = np.linspace(2, 101, 600)
with pytest.raises(ModelErr) as excinfo:
c.regrid(lo, hi)
assert ModelErr.dict['needsint'] in str(excinfo.value)
def test_warning_plot_hist_linecolor(caplog):
"""We get a warning when using linecolor: ModelHistogramPlot"""
data = Data1DInt('tst', np.asarray([1, 2, 3]), np.array([2, 2.5, 4]),
np.asarray([10, 12, 10.5]))
mdl = Const1D()
plot = ModelHistogramPlot()
plot.prepare(data, mdl, stat=None)
with caplog.at_level(logging.INFO, logger='sherpa'):
plot.plot(linecolor='mousey')
assert len(caplog.records) == 1
lname, lvl, msg = caplog.record_tuples[0]
assert lname == 'sherpa.plot.pylab_backend'
assert lvl == logging.WARNING
assert msg == 'The linecolor attribute (mousey) is unused.'
def setup_single_1dint(stat, sys):
"""Return a single data set and model.
Parameters
----------
stat, sys : bool
Should statistical and systematic errors be explicitly set
(True) or taken from the statistic (False)?
Returns
-------
data, model
Data1DInt and Model objects.
"""
xlo = np.asarray([-10, -5, 3, 4])
xhi = np.asarray([-5, 2, 4, 7])
y = np.asarray([16.3, 2.4, 4.3, 5.6])
if stat:
# pick values close to sqrt(y)
staterr = np.asarray([4.0, 1.6, 2.1, 2.4])
else:
staterr = None
if sys:
syserr = 0.05 * y
else:
syserr = None
data = Data1DInt('tst1', xlo, xhi, y, staterror=staterr, syserror=syserr)
# As the model is integrated, the normalization values need to
# be divided by the bin width, but the bins are not constant
# width, so pick a value which gives reasonable values.
#
mdl = Polynom1D('mdl1')
mdl.c0 = 0
mdl.c2 = 0.08
mdl.offset = -1
mdl.offset.frozen = False
mdl.c2.frozen = False
return data, mdl
def test_low_level_regrid1d_int_full_overlap(requested, tol):
"""Base case of test_low_level_regrid1d_int_partial_overlap
"""
# The range over which we want the model evaluated
dx = 0.1
xgrid = np.arange(2, 6, dx)
xlo = xgrid[:-1]
xhi = xgrid[1:]
d = Data1DInt('tst', xlo, xhi, np.ones_like(xlo))
mdl = Box1D()
mdl.xlow = 3.1
mdl.xhi = 4.2
mdl.ampl = 0.4
yexpected = d.eval_model(mdl)
assert yexpected.min() == pytest.approx(0.0)
assert yexpected.max() == pytest.approx(0.4 * dx)
ygot = d.eval_model(mdl.regrid(requested[:-1], requested[1:]))
assert ygot == pytest.approx(yexpected, abs=tol)
def test_histogram_returns_x():
"""We support x accessor for histogram plots."""
xlo = [10, 20, 40, 80]
xhi = [20, 40, 60, 90]
y = [1, 2, 3, 4]
d = Data1DInt('xx', xlo, xhi, y)
dp = sherpaplot.DataHistogramPlot()
dp.prepare(d)
xlo = numpy.asarray(xlo)
xhi = numpy.asarray(xhi)
assert dp.xlo == pytest.approx(xlo)
assert dp.xhi == pytest.approx(xhi)
assert dp.x == pytest.approx(0.5 * (xlo + xhi))
# check x is not in the str output
#
for line in str(dp).split('\n'):
toks = line.split()
assert len(toks) > 2
assert toks[0] != 'x'
def test_low_level_regrid1d_int_partial_overlap(requested, tol):
"""What happens if there is partial overlap of the grid?
See test_low_level_regrid1d_partial_overlap.
See the comments for when the tol value is used (only for
edges, not "flat" sections of the model).
"""
# The range over which we want the model evaluated
dx = 0.1
xgrid = np.arange(2, 6, dx)
xlo = xgrid[:-1]
xhi = xgrid[1:]
d = Data1DInt('tst', xlo, xhi, np.ones_like(xlo))
mdl = Box1D()
mdl.xlow = 3.1
mdl.xhi = 4.2
mdl.ampl = 0.4
yexpected = d.eval_model(mdl)
assert yexpected.min() == pytest.approx(0.0)
assert yexpected.max() == pytest.approx(0.4 * dx)
rlo = requested[:-1]
rhi = requested[1:]
ygot = d.eval_model(mdl.regrid(rlo, rhi))
# Note that due to the different bin widths of the input and
# output bins, the start and end bins of the integrated box
# model will not line up nicely, and so the rising and falling
# edges may cause differences for more than a single bin. We
# can think of there being five regions (going from left to
# right along the grid):
#
# before
# rising edge
# middle of box
# falling edge
# after
#
# The expected bin values for the middle are 0.4 * dx = 0.04
# and before and after should be 0. The edges depend on the
# bin widths, so the tolerance here had been adjusted until
# the tests pass.
#
before = np.arange(0, 10)
rising = np.arange(10, 12)
middle = np.arange(12, 21)
trailing = np.arange(21, 23)
after = np.arange(23, 39)
# This ensures that if xgrid is changed (in length at least) we
# have a reminder to check the above ranges.
#
assert len(xlo) == 39
for idxs in [before, middle, after]:
assert ygot[idxs] == pytest.approx(yexpected[idxs])
for idxs in [rising, trailing]:
assert ygot[idxs] == pytest.approx(yexpected[idxs], abs=tol)
def _make_dataset(n_dim, x, y, z=None, xbinsize=None, ybinsize=None, err=None, bkg=None, bkg_scale=1, n=0):
"""
Parameters
----------
n_dim: int
Used to veirfy required number of dimentions.
x : array
input coordinates
y : array
input coordinates
z : array (optional)
input coordinatesbkg
xbinsize : array (optional)
an array of errors in x
ybinsize : array (optional)
an array of errors in y
err : array (optional)
an array of errors in z
n : int
used in error reporting
Returns
-------
_data: a sherpa dataset
"""
if (z is None and n_dim > 1) or (z is not None and n_dim == 1):
raise ValueError("Model and data dimentions don't match in dataset %i" % n)
if z is None:
assert x.shape == y.shape, "shape of x and y don't match in dataset %i" % n
else:
z = np.asarray(z)
assert x.shape == y.shape == z.shape, "shapes x,y and z don't match in dataset %i" % n
if xbinsize is not None:
xbinsize = np.array(xbinsize)
assert x.shape == xbinsize.shape, "x's and xbinsize's shapes do not match in dataset %i" % n
if z is not None and err is not None:
err = np.array(err)
assert z.shape == err.shape, "z's and err's shapes do not match in dataset %i" % n
if ybinsize is not None:
ybinsize = np.array(ybinsize)
assert y.shape == ybinsize.shape, "y's and ybinsize's shapes do not match in dataset %i" % n
else:
if err is not None:
err = np.array(err)
assert y.shape == err.shape, "y's and err's shapes do not match in dataset %i" % n
if xbinsize is not None:
bs = xbinsize / 2.0
if z is None:
if xbinsize is None:
if err is None:
if bkg is None:
data = Data1D("wrapped_data", x=x, y=y)
else:
data = Data1DBkg("wrapped_data", x=x, y=y, bkg=bkg, bkg_scale=bkg_scale)
else:
if bkg is None:
data = Data1D("wrapped_data", x=x, y=y, staterror=err)
else:
data = Data1DBkg("wrapped_data", x=x, y=y, staterror=err, bkg=bkg, bkg_scale=bkg_scale)
else:
if err is None:
if bkg is None:
data = Data1DInt("wrapped_data", xlo=x - bs, xhi=x + bs, y=y)
else:
data = Data1DIntBkg("wrapped_data", xlo=x - bs, xhi=x + bs, y=y, bkg=bkg, bkg_scale=bkg_scale)
else:
if bkg is None:
data = Data1DInt("wrapped_data", xlo=x - bs, xhi=x + bs, y=y, staterror=err)
else:
data = Data1DIntBkg("wrapped_data", xlo=x - bs, xhi=x + bs, y=y, staterror=err, bkg=bkg, bkg_scale=bkg_scale)
else:
if xbinsize is None and ybinsize is None:
if err is None:
if bkg is None:
data = Data2D("wrapped_data", x0=x, x1=y, y=z)
else:
data = Data2DBkg("wrapped_data", x0=x, x1=y, y=z, bkg=bkg, bkg_scale=bkg_scale)
else:
if bkg is None:
data = Data2D("wrapped_data", x0=x, x1=y, y=z, staterror=err)
else:
data = Data2DBkg("wrapped_data", x0=x, x1=y, y=z, staterror=err, bkg=bkg, bkg_scale=bkg_scale)
elif xbinsize is not None and ybinsize is not None:
ys = ybinsize / 2.0
if err is None:
if bkg is None:
data = Data2DInt("wrapped_data", x0lo=x - bs, x0hi=x + bs, x1lo=y - ys, x1hi=y + ys, y=z)
else:
data = Data2DIntBkg("wrapped_data", x0lo=x - bs, x0hi=x + bs, x1lo=y - ys, x1hi=y + ys, y=z, bkg=bkg, bkg_scale=bkg_scale)
else:
if bkg is None:
data = Data2DInt("wrapped_data", x0lo=x - bs, x0hi=x + bs, x1lo=y - ys, x1hi=y + ys, y=z, staterror=err)
else:
data = Data2DIntBkg("wrapped_data", x0lo=x - bs, x0hi=x + bs, x1lo=y - ys, x1hi=y + ys, y=z, staterror=err, bkg=bkg, bkg_scale=bkg_scale)
else:
raise ValueError("Set xbinsize and ybinsize, or set neither!")
return data
print(eval(name))
print("----------------------------------------")
def dump(name):
print("# dump")
print("{}".format(name))
print(repr(eval(name)))
print("----------------------------------------")
edges = np.asarray([-10, -5, 5, 12, 17, 20, 30, 56, 60])
y = np.asarray([28, 62, 17, 4, 2, 4, 125, 55])
from sherpa.data import Data1DInt
d = Data1DInt('example histogram', edges[:-1], edges[1:], y)
from sherpa.plot import DataPlot
dplot = DataPlot()
dplot.prepare(d)
dplot.plot()
savefig('dataplot_histogram.png')
from sherpa.plot import Histogram
hplot = Histogram()
hplot.overplot(d.xlo, d.xhi, d.y)
savefig('dataplot_histogram_overplot.png')
from sherpa.models.basic import Const1D, Gauss1D
