def addInitializationToOutput(self):
"Add initialization gcode to the output."
self.addFromUpperLowerFile(self.repository.nameOfStartFile.value) # Add a start file if it exists.
self.distanceFeedRate.addTagBracketedLine('creation', 'skeinforge') # GCode formatted comment
absoluteFilePathUntilDot = os.path.abspath(__file__)[: os.path.abspath(__file__).rfind('.')]
if absoluteFilePathUntilDot == '/home/enrique/Desktop/backup/babbleold/script/reprap/fabmetheus/skeinforge_application/skeinforge_plugins/craft_plugins/preface': #is this script on Enrique's computer?
archive.writeFileText(archive.getVersionFileName(), date.today().isoformat().replace('-', '.')[2 :])
versionText = archive.getFileText(archive.getVersionFileName())
self.distanceFeedRate.addTagBracketedLine('version', versionText) # GCode formatted comment
self.distanceFeedRate.addLine('(<extruderInitialization>)') # GCode formatted comment
if self.repository.setPositioningToAbsolute.value:
self.distanceFeedRate.addLine('G90 ;set positioning to absolute') # Set positioning to absolute.
if self.repository.setUnitsToMillimeters.value:
self.distanceFeedRate.addLine('G21 ;set units to millimeters') # Set units to millimeters.
if self.repository.startAtHome.value:
self.distanceFeedRate.addLine('G28 ;start at home') # Start at home.
if self.repository.turnExtruderOffAtStartUp.value:
self.distanceFeedRate.addLine('M103') # Turn extruder off.
craftTypeName = skeinforge_profile.getCraftTypeName()
self.distanceFeedRate.addTagBracketedLine('craftTypeName', craftTypeName)
self.distanceFeedRate.addTagBracketedLine('decimalPlacesCarried', self.distanceFeedRate.decimalPlacesCarried)
layerThickness = float(self.svgReader.sliceDictionary['layerThickness'])
self.distanceFeedRate.addTagRoundedLine('layerThickness', layerThickness)
if self.repository.meta.value:
self.distanceFeedRate.addTagBracketedLine('meta', self.repository.meta.value)
perimeterWidth = float(self.svgReader.sliceDictionary['perimeterWidth'])
self.distanceFeedRate.addTagRoundedLine('perimeterWidth', perimeterWidth)
self.distanceFeedRate.addTagBracketedLine('profileName', skeinforge_profile.getProfileName(craftTypeName))
procedureNames = self.svgReader.sliceDictionary['procedureName'].replace(',', ' ').split()
for procedureName in procedureNames:
self.distanceFeedRate.addTagBracketedLine('procedureName', procedureName)
self.distanceFeedRate.addTagBracketedLine('procedureName', 'preface')
self.distanceFeedRate.addLine('(</extruderInitialization>)') # Initialization is finished, extrusion is starting.
self.distanceFeedRate.addLine('(<crafting>)') # Initialization is finished, crafting is starting.
def addInitializationToOutput( self ): "Add initialization gcode to the output." self.addFromUpperLowerFile( self.prefaceRepository.nameOfStartFile.value ) # Add a start file if it exists. self.distanceFeedRate.addTagBracketedLine( 'creation', 'skeinforge' ) # GCode formatted comment absoluteFilePathUntilDot = os.path.abspath( __file__ )[ : os.path.abspath( __file__ ).rfind( '.' ) ] if absoluteFilePathUntilDot == '/home/enrique/Desktop/backup/babbleold/script/reprap/fabmetheus/skeinforge_application/skeinforge_plugins/craft_plugins/preface': #is this script on Enrique's computer? gcodec.writeFileText( gcodec.getVersionFileName(), date.today().isoformat() ) versionText = gcodec.getFileText( gcodec.getVersionFileName() ) self.distanceFeedRate.addTagBracketedLine( 'version', versionText ) # GCode formatted comment self.distanceFeedRate.addLine( '(<extruderInitialization>)' ) # GCode formatted comment if self.prefaceRepository.setPositioningToAbsolute.value: self.distanceFeedRate.addLine( 'G90' ) # Set positioning to absolute. if self.prefaceRepository.setUnitsToMillimeters.value: self.distanceFeedRate.addLine( 'G21' ) # Set units to millimeters. if self.prefaceRepository.startAtHome.value: self.distanceFeedRate.addLine( 'G28' ) # Start at home. if self.prefaceRepository.turnExtruderOffAtStartUp.value: self.distanceFeedRate.addLine( 'M103' ) # Turn extruder off. craftTypeName = skeinforge_profile.getCraftTypeName() self.distanceFeedRate.addTagBracketedLine( 'craftTypeName', craftTypeName ) self.distanceFeedRate.addTagBracketedLine( 'decimalPlacesCarried', self.distanceFeedRate.decimalPlacesCarried ) self.distanceFeedRate.addTagBracketedLine( 'layerThickness', self.distanceFeedRate.getRounded( self.layerThickness ) ) if self.prefaceRepository.meta.value: self.distanceFeedRate.addTagBracketedLine( 'meta', self.prefaceRepository.meta.value ) self.distanceFeedRate.addTagBracketedLine( 'perimeterWidth', self.distanceFeedRate.getRounded( self.perimeterWidth ) ) self.distanceFeedRate.addTagBracketedLine( 'profileName', skeinforge_profile.getProfileName( craftTypeName ) ) self.distanceFeedRate.addTagBracketedLine( 'procedureDone', 'carve' ) self.distanceFeedRate.addTagBracketedLine( 'procedureDone', 'preface' ) self.distanceFeedRate.addLine( '(</extruderInitialization>)' ) # Initialization is finished, extrusion is starting. self.distanceFeedRate.addLine( '(<extrusion>)' ) # Initialization is finished, extrusion is starting.
def addInitializationToOutput(self):
"""Add initialization gcode to the output."""
self.addFromUpperLowerFile(self.repository.nameOfStartFile.value) # Add a start file if it exists.
self.distanceFeedRate.addTagBracketedLine('creation', 'skeinforge') # GCode formatted comment
absoluteFilePathUntilDot = os.path.abspath(__file__)[: os.path.abspath(__file__).rfind('.')]
if absoluteFilePathUntilDot == '/home/enrique/Desktop/backup/babbleold/script/reprap/fabmetheus/skeinforge_application/skeinforge_plugins/craft_plugins/preface': #is this script on Enrique's computer?
archive.writeFileText(archive.getVersionFileName(), date.today().isoformat().replace('-', '.')[2 :])
versionText = archive.getFileText(archive.getVersionFileName())
self.distanceFeedRate.addTagBracketedLine('version', versionText) # GCode formatted comment
self.distanceFeedRate.addLine('(<extruderInitialization>)') # GCode formatted comment
if self.repository.setPositioningToAbsolute.value:
self.distanceFeedRate.addLine('G90 ;set positioning to absolute') # Set positioning to absolute.
if self.repository.setUnitsToMillimeters.value:
self.distanceFeedRate.addLine('G21 ;set units to millimeters') # Set units to millimeters.
if self.repository.startAtHome.value:
self.distanceFeedRate.addLine('G28 ;start at home') # Start at home.
if self.repository.resetExtruder.value:
self.distanceFeedRate.addLine('G92 E0 ;reset extruder distance') # Start at home.
craftTypeName = skeinforge_profile.getCraftTypeName()
self.distanceFeedRate.addTagBracketedLine('craftTypeName', craftTypeName)
self.distanceFeedRate.addTagBracketedLine('decimalPlacesCarried', self.distanceFeedRate.decimalPlacesCarried)
extrusionHeight = float(self.svgReader.sliceDictionary['extrusionHeight'])
self.distanceFeedRate.addTagRoundedLine('extrusionHeight', extrusionHeight)
if self.repository.meta.value:
self.distanceFeedRate.addTagBracketedLine('meta', self.repository.meta.value)
extrusionWidth = float(self.svgReader.sliceDictionary['extrusionWidth'])
self.distanceFeedRate.addTagRoundedLine('extrusionWidth', extrusionWidth)
self.distanceFeedRate.addTagBracketedLine('profileName', skeinforge_profile.getProfileName(craftTypeName))
procedureNames = self.svgReader.sliceDictionary['procedureName'].replace(',', ' ').split()
for procedureName in procedureNames:
self.distanceFeedRate.addTagBracketedLine('procedureName', procedureName)
self.distanceFeedRate.addTagBracketedLine('procedureName', 'preface')
self.distanceFeedRate.addLine('(</extruderInitialization>)') # Initialization is finished, extrusion is starting.
self.distanceFeedRate.addLine('(<crafting>)') # Initialization is finished, crafting is starting.
def writeOutput(fileName, shouldAnalyze=True):
"Export a gcode linear move file."
if fileName == "":
return None
repository = ExportRepository()
settings.getReadRepository(repository)
startTime = time.time()
print("File " + archive.getSummarizedFileName(fileName) + " is being chain exported.")
fileNameSuffix = fileName[: fileName.rfind(".")]
if repository.addExportSuffix.value:
fileNameSuffix += "_export"
gcodeText = gcodec.getGcodeFileText(fileName, "")
if repository.addProfileExtension.value:
profileName = skeinforge_profile.getProfileName(skeinforge_profile.getCraftTypeName())
if profileName:
fileNameSuffix += "." + string.replace(profileName, " ", "_")
if repository.addDescriptiveExtension.value:
fileNameSuffix += getDescriptiveExtension(gcodeText)
if repository.addTimestampExtension.value:
fileNameSuffix += "." + getFirstValue(gcodeText, "(<timeStampPreface>")
fileNameSuffix += "." + repository.fileExtension.value
procedures = skeinforge_craft.getProcedures("export", gcodeText)
gcodeText = skeinforge_craft.getChainTextFromProcedures(fileName, procedures[:-1], gcodeText)
if gcodeText == "":
return None
fileNamePenultimate = fileName[: fileName.rfind(".")] + "_penultimate.gcode"
filePenultimateWritten = False
if repository.savePenultimateGcode.value:
archive.writeFileText(fileNamePenultimate, gcodeText)
filePenultimateWritten = True
print("The penultimate file is saved as " + archive.getSummarizedFileName(fileNamePenultimate))
exportGcode = getCraftedTextFromText(gcodeText, repository)
window = None
if shouldAnalyze:
window = skeinforge_analyze.writeOutput(
fileName, fileNamePenultimate, fileNameSuffix, filePenultimateWritten, gcodeText
)
replaceableExportGcode = None
selectedPluginModule = getSelectedPluginModule(repository.exportPlugins)
if selectedPluginModule == None:
replaceableExportGcode = exportGcode
else:
if selectedPluginModule.globalIsReplaceable:
replaceableExportGcode = selectedPluginModule.getOutput(exportGcode)
else:
selectedPluginModule.writeOutput(fileNameSuffix, exportGcode)
if replaceableExportGcode != None:
replaceableExportGcode = getReplaceableExportGcode(repository.nameOfReplaceFile.value, replaceableExportGcode)
archive.writeFileText(fileNameSuffix, replaceableExportGcode)
print("The exported file is saved as " + archive.getSummarizedFileName(fileNameSuffix))
if repository.alsoSendOutputTo.value != "":
if replaceableExportGcode == None:
replaceableExportGcode = selectedPluginModule.getOutput(exportGcode)
sendOutputTo(repository.alsoSendOutputTo.value, replaceableExportGcode)
print("It took %s to export the file." % euclidean.getDurationString(time.time() - startTime))
return window
def addInitializationToOutput(self):
"Add initialization gcode to the output."
self.addFromUpperLowerFile(self.repository.nameOfStartFile.value) # Add a start file if it exists.
self.distanceFeedRate.addTagBracketedLine('creation', 'skeinforge') # GCode formatted comment
# absoluteFilePathUntilDot = os.path.abspath(__file__)[: os.path.abspath(__file__).rfind('.')]
# if absoluteFilePathUntilDot == '/home/enrique/Desktop/backup/babbleold/script/reprap/fabmetheus/skeinforge_application/skeinforge_plugins/craft_plugins/preface': #is this script on Enrique's computer?
# archive.writeFileText(archive.getVersionFileName(), date.today().isoformat().replace('-', '.')[2 :])
versionText = archive.getFileText(archive.getVersionFileName())
self.distanceFeedRate.addTagBracketedLine('version', versionText) # GCode formatted comment
self.distanceFeedRate.addLine('(<extruderInitialization>)') # GCode formatted comment
if self.repository.setPositioningToAbsolute.value:
self.distanceFeedRate.addLine('G90 ;set positioning to absolute') # Set positioning to absolute.
if self.repository.setUnitsToMillimeters.value:
self.distanceFeedRate.addLine('G21 ;set units to millimeters') # Set units to millimeters.
if self.repository.startAtHome.value:
self.distanceFeedRate.addLine('G28 ;start at home') # Start at home.
if self.repository.resetExtruder.value:
self.distanceFeedRate.addLine('G92 E0 ;reset extruder distance') # Start at home.
# if self.repository.turnExtruderOffAtStartUp.value:
# self.distanceFeedRate.addLine('M103') # Turn extruder off.
craftTypeName = skeinforge_profile.getCraftTypeName()
self.distanceFeedRate.addTagBracketedLine('craftTypeName', craftTypeName)
self.distanceFeedRate.addTagBracketedLine('decimalPlacesCarried', self.distanceFeedRate.decimalPlacesCarried)
layerThickness = float(self.svgReader.sliceDictionary['layerThickness'])
self.distanceFeedRate.addTagRoundedLine('layerThickness', layerThickness)
if self.repository.meta.value:
self.distanceFeedRate.addTagBracketedLine('meta', self.repository.meta.value)
if self.repository.extraLineOne.value:
self.distanceFeedRate.addLine( self.repository.extraLineOne.value)
if self.repository.extraLineTwo.value:
self.distanceFeedRate.addLine( self.repository.extraLineTwo.value)
if self.repository.extraLineThree.value:
self.distanceFeedRate.addLine( self.repository.extraLineThree.value)
if self.repository.extraLineFour.value:
self.distanceFeedRate.addLine( self.repository.extraLineFour.value)
if self.repository.extraLineFive.value:
self.distanceFeedRate.addLine( self.repository.extraLineFive.value)
perimeterWidth = float(self.svgReader.sliceDictionary['perimeterWidth'])
self.distanceFeedRate.addTagRoundedLine('perimeterWidth', perimeterWidth)
self.distanceFeedRate.addTagBracketedLine('profileName', skeinforge_profile.getProfileName(craftTypeName))
self.distanceFeedRate.addLine('(<settings>)')
pluginFileNames = skeinforge_craft.getPluginFileNames()
for pluginFileName in pluginFileNames:
self.addToolSettingLines(pluginFileName)
self.distanceFeedRate.addLine('(</settings>)')
self.distanceFeedRate.addTagBracketedLine('timeStampPreface', strftime('%Y%m%d_%H%M%S'))
procedureNames = self.svgReader.sliceDictionary['procedureName'].replace(',', ' ').split()
for procedureName in procedureNames:
self.distanceFeedRate.addTagBracketedLine('procedureName', procedureName)
self.distanceFeedRate.addTagBracketedLine('procedureName', 'preface')
self.distanceFeedRate.addLine('(</extruderInitialization>)') # Initialization is finished, extrusion is starting.
self.distanceFeedRate.addLine('(<crafting>)') # Initialization is finished, crafting is starting.
def addInitializationToOutput(self):
"Add initialization gcode to the output."
self.distanceFeedRate.addTagBracketedLine("format", "skeinforge gcode")
absoluteFilePathUntilDot = archive.getUntilDot(archive.getCraftPluginsDirectoryPath("preface.py"))
dateTodayString = date.today().isoformat().replace("-", ".")[2:]
if (
absoluteFilePathUntilDot
== "/home/enrique/Desktop/backup/babbleold/script/reprap/fabmetheus/skeinforge_application/skeinforge_plugins/craft_plugins/preface"
): # is this script on Enrique's computer?
archive.writeFileText(archive.getVersionFileName(), dateTodayString)
versionText = archive.getFileText(archive.getVersionFileName())
self.distanceFeedRate.addTagBracketedLine("version", versionText)
dateTimeTuple = datetime.now().timetuple()
created = dateTodayString + "|%s:%s" % (dateTimeTuple[3], dateTimeTuple[4])
self.distanceFeedRate.addTagBracketedLine("created", created)
self.distanceFeedRate.addLine("(<extruderInitialization>)")
if self.repository.setPositioningToAbsolute.value:
self.distanceFeedRate.addLine("G90 ;set positioning to absolute") # Set positioning to absolute.
if self.repository.setUnitsToMillimeters.value:
self.distanceFeedRate.addLine("G21 ;set units to millimeters") # Set units to millimeters.
if self.repository.startAtHome.value:
self.distanceFeedRate.addLine("G28 ;start at home") # Start at home.
if self.repository.turnExtruderOffAtStartUp.value:
self.distanceFeedRate.addLine("M103") # Turn extruder off.
craftTypeName = skeinforge_profile.getCraftTypeName()
self.distanceFeedRate.addTagBracketedLine("craftTypeName", craftTypeName)
self.distanceFeedRate.addTagBracketedLine("decimalPlacesCarried", self.distanceFeedRate.decimalPlacesCarried)
layerHeight = float(self.svgReader.sliceDictionary["layerHeight"])
self.distanceFeedRate.addTagRoundedLine("layerThickness", layerHeight)
self.distanceFeedRate.addTagRoundedLine("layerHeight", layerHeight)
if self.repository.meta.value:
self.distanceFeedRate.addTagBracketedLine("meta", self.repository.meta.value)
edgeWidth = float(self.svgReader.sliceDictionary["edgeWidth"])
self.distanceFeedRate.addTagRoundedLine("edgeWidth", edgeWidth)
self.distanceFeedRate.addTagRoundedLine("perimeterWidth", edgeWidth)
self.distanceFeedRate.addTagBracketedLine("profileName", skeinforge_profile.getProfileName(craftTypeName))
self.distanceFeedRate.addLine("(<settings>)")
pluginFileNames = skeinforge_craft.getPluginFileNames()
for pluginFileName in pluginFileNames:
self.addToolSettingLines(pluginFileName)
self.distanceFeedRate.addLine("(</settings>)")
self.distanceFeedRate.addTagBracketedLine("timeStampPreface", strftime("%Y%m%d_%H%M%S"))
procedureNames = self.svgReader.sliceDictionary["procedureName"].replace(",", " ").split()
for procedureName in procedureNames:
self.distanceFeedRate.addTagBracketedProcedure(procedureName)
self.distanceFeedRate.addTagBracketedProcedure("preface")
self.distanceFeedRate.addLine(
"(</extruderInitialization>)"
) # Initialization is finished, extrusion is starting.
self.distanceFeedRate.addLine("(<crafting>)") # Initialization is finished, crafting is starting.
def addInitializationToOutput(self):
"Add initialization gcode to the output."
self.distanceFeedRate.addTagBracketedLine('format', 'skeinforge gcode')
absoluteFilePathUntilDot = archive.getUntilDot(archive.getCraftPluginsDirectoryPath('preface.py'))
dateTodayString = date.today().isoformat().replace('-', '.')[2 :]
if absoluteFilePathUntilDot == '/home/enrique/Desktop/backup/babbleold/script/reprap/fabmetheus/skeinforge_application/skeinforge_plugins/craft_plugins/preface': #is this script on Enrique's computer?
archive.writeFileText(archive.getVersionFileName(), dateTodayString)
versionText = archive.getFileText(archive.getVersionFileName())
self.distanceFeedRate.addTagBracketedLine('version', versionText)
dateTimeTuple = datetime.now().timetuple()
created = dateTodayString + '|%s:%s' % (dateTimeTuple[3], dateTimeTuple[4])
self.distanceFeedRate.addTagBracketedLine('created', created)
self.distanceFeedRate.addLine('(<extruderInitialization>)')
if self.repository.setPositioningToAbsolute.value:
self.distanceFeedRate.addLine('G90 ;set positioning to absolute') # Set positioning to absolute.
if self.repository.setUnitsToMillimeters.value:
self.distanceFeedRate.addLine('G21 ;set units to millimeters') # Set units to millimeters.
if self.repository.startAtHome.value:
self.distanceFeedRate.addLine('G28 ;start at home') # Start at home.
if self.repository.resetExtruder.value:
self.distanceFeedRate.addLine('G92 E0 ;reset extruder distance') # Start at home.
if self.repository.turnExtruderOffAtStartUp.value:
self.distanceFeedRate.addLine('M103') # Turn extruder off.
craftTypeName = skeinforge_profile.getCraftTypeName()
self.distanceFeedRate.addTagBracketedLine('craftTypeName', craftTypeName)
self.distanceFeedRate.addTagBracketedLine('decimalPlacesCarried', self.distanceFeedRate.decimalPlacesCarried)
layerHeight = float(self.svgReader.sliceDictionary['layerHeight'])
self.distanceFeedRate.addTagRoundedLine('layerThickness', layerHeight)
self.distanceFeedRate.addTagRoundedLine('layerHeight', layerHeight)
if self.repository.meta.value:
self.distanceFeedRate.addTagBracketedLine('meta', self.repository.meta.value)
edgeWidth = float(self.svgReader.sliceDictionary['edgeWidth'])
self.distanceFeedRate.addTagRoundedLine('edgeWidth', edgeWidth)
self.distanceFeedRate.addTagRoundedLine('perimeterWidth', edgeWidth)
self.distanceFeedRate.addTagBracketedLine('profileName', skeinforge_profile.getProfileName(craftTypeName))
self.distanceFeedRate.addLine('(<settings>)')
pluginFileNames = skeinforge_craft.getPluginFileNames()
for pluginFileName in pluginFileNames:
self.addToolSettingLines(pluginFileName)
self.distanceFeedRate.addLine('(</settings>)')
self.distanceFeedRate.addTagBracketedLine('timeStampPreface', strftime('%Y%m%d_%H%M%S'))
procedureNames = self.svgReader.sliceDictionary['procedureName'].replace(',', ' ').split()
for procedureName in procedureNames:
self.distanceFeedRate.addTagBracketedProcedure(procedureName)
self.distanceFeedRate.addTagBracketedProcedure('preface')
self.distanceFeedRate.addLine('(</extruderInitialization>)') # Initialization is finished, extrusion is starting.
self.distanceFeedRate.addLine('(<crafting>)') # Initialization is finished, crafting is starting.
def addInitializationToOutput(self):
"Add initialization gcode to the output."
self.distanceFeedRate.addTagBracketedLine('format', 'skeinforge gcode')
absoluteFilePathUntilDot = archive.getUntilDot(archive.getCraftPluginsDirectoryPath('preface.py'))
dateTodayString = date.today().isoformat().replace('-', '.')[2 :]
if absoluteFilePathUntilDot == '/home/enrique/Desktop/backup/babbleold/script/reprap/fabmetheus/skeinforge_application/skeinforge_plugins/craft_plugins/preface': #is this script on Enrique's computer?
archive.writeFileText(archive.getVersionFileName(), dateTodayString)
versionText = archive.getFileText(archive.getVersionFileName())
self.distanceFeedRate.addTagBracketedLine('version', versionText)
dateTimeTuple = datetime.now().timetuple()
created = dateTodayString + '|%s:%s' % (dateTimeTuple[3], dateTimeTuple[4])
self.distanceFeedRate.addTagBracketedLine('created', created)
self.distanceFeedRate.addLine('(<extruderInitialization>)')
if self.repository.setPositioningToAbsolute.value:
self.distanceFeedRate.addLine('G90 ;set positioning to absolute') # Set positioning to absolute.
if self.repository.setUnitsToMillimeters.value:
self.distanceFeedRate.addLine('G21 ;set units to millimeters') # Set units to millimeters.
if self.repository.startAtHome.value:
self.distanceFeedRate.addLine('G28 ;start at home') # Start at home.
if self.repository.turnExtruderOffAtStartUp.value:
self.distanceFeedRate.addLine('M103') # Turn extruder off.
craftTypeName = skeinforge_profile.getCraftTypeName()
self.distanceFeedRate.addTagBracketedLine('craftTypeName', craftTypeName)
self.distanceFeedRate.addTagBracketedLine('decimalPlacesCarried', self.distanceFeedRate.decimalPlacesCarried)
layerHeight = float(self.svgReader.sliceDictionary['layerHeight'])
self.distanceFeedRate.addTagRoundedLine('layerThickness', layerHeight)
self.distanceFeedRate.addTagRoundedLine('layerHeight', layerHeight)
if self.repository.meta.value:
self.distanceFeedRate.addTagBracketedLine('meta', self.repository.meta.value)
edgeWidth = float(self.svgReader.sliceDictionary['edgeWidth'])
self.distanceFeedRate.addTagRoundedLine('edgeWidth', edgeWidth)
self.distanceFeedRate.addTagRoundedLine('perimeterWidth', edgeWidth)
self.distanceFeedRate.addTagBracketedLine('profileName', skeinforge_profile.getProfileName(craftTypeName))
self.distanceFeedRate.addLine('(<settings>)')
pluginFileNames = skeinforge_craft.getPluginFileNames()
for pluginFileName in pluginFileNames:
self.addToolSettingLines(pluginFileName)
self.distanceFeedRate.addLine('(</settings>)')
self.distanceFeedRate.addTagBracketedLine('timeStampPreface', strftime('%Y%m%d_%H%M%S'))
procedureNames = self.svgReader.sliceDictionary['procedureName'].replace(',', ' ').split()
for procedureName in procedureNames:
self.distanceFeedRate.addTagBracketedProcedure(procedureName)
self.distanceFeedRate.addTagBracketedProcedure('preface')
self.distanceFeedRate.addLine('(</extruderInitialization>)') # Initialization is finished, extrusion is starting.
self.distanceFeedRate.addLine('(<crafting>)') # Initialization is finished, crafting is starting.
def writeOutput(fileName, shouldAnalyze=True):
'Export a gcode linear move file.'
if fileName == '':
return None
repository = ExportRepository()
settings.getReadRepository(repository)
startTime = time.time()
print('File ' + archive.getSummarizedFileName(fileName) +
' is being chain exported.')
fileNameSuffix = fileName[:fileName.rfind('.')]
if repository.addExportSuffix.value:
fileNameSuffix += '_export'
if (repository.profileFileExtension.value == True):
profileName = skeinforge_profile.getProfileName(
skeinforge_profile.getCraftTypeName())
if profileName:
fileNameSuffix += '.' + string.replace(profileName, ' ', '_')
if (repository.descriptiveExtension.value == True):
fileNameSuffix += descriptiveExtension()
if (repository.timestampExtension.value == True):
fileNameSuffix += '.' + strftime("%Y%m%d_%H%M%S")
if (repository.archiveProfile.value == True):
profileName = skeinforge_profile.getProfileName(
skeinforge_profile.getCraftTypeName())
if profileName:
profileZipFileName = fileNameSuffix + '.zip'
zipper(
archive.getProfilesPath(
skeinforge_profile.getProfileDirectory()),
profileName + '/', profileZipFileName)
print('Profile archived to ' + profileZipFileName)
if (repository.exportProfileAsCsv.value == True):
csvExportFilename = fileNameSuffix + '.csv'
archive.writeFileText(csvExportFilename, Condenser().readSettings())
fileNameSuffix += '.' + repository.fileExtension.value
gcodeText = gcodec.getGcodeFileText(fileName, '')
procedures = skeinforge_craft.getProcedures('export', gcodeText)
gcodeText = skeinforge_craft.getChainTextFromProcedures(
fileName, procedures[:-1], gcodeText)
if gcodeText == '':
return None
if repository.savePenultimateGcode.value:
penultimateFileName = fileName[:fileName.
rfind('.')] + '_penultimate.gcode'
archive.writeFileText(penultimateFileName, gcodeText)
print('The penultimate file is saved as ' +
archive.getSummarizedFileName(penultimateFileName))
exportGcode = getCraftedTextFromText(gcodeText, repository)
window = None
if shouldAnalyze:
window = skeinforge_analyze.writeOutput(fileName, fileNameSuffix,
gcodeText)
replaceableExportGcode = None
selectedPluginModule = getSelectedPluginModule(repository.exportPlugins)
if selectedPluginModule == None:
replaceableExportGcode = exportGcode
else:
if selectedPluginModule.globalIsReplaceable:
replaceableExportGcode = selectedPluginModule.getOutput(
exportGcode)
else:
selectedPluginModule.writeOutput(fileNameSuffix, exportGcode)
if replaceableExportGcode != None:
replaceableExportGcode = getReplaceableExportGcode(
repository.nameOfReplaceFile.value, replaceableExportGcode)
archive.writeFileText(fileNameSuffix, replaceableExportGcode)
print('The exported file is saved as ' +
archive.getSummarizedFileName(fileNameSuffix))
if repository.alsoSendOutputTo.value != '':
if replaceableExportGcode == None:
replaceableExportGcode = selectedPluginModule.getOutput(
exportGcode)
sendOutputTo(replaceableExportGcode, repository.alsoSendOutputTo.value)
print('It took %s to export the file.' %
euclidean.getDurationString(time.time() - startTime))
return window
def writeOutput(fileName, shouldAnalyze=True):
"""Export a gcode linear move file."""
if fileName == '':
return None
repository = ExportRepository()
settings.getReadRepository(repository)
startTime = time.time()
print('File ' + archive.getSummarizedFileName(fileName) + ' is being chain exported.')
fileNameSuffix = fileName[: fileName.rfind('.')]
if repository.addExportSuffix.value:
fileNameSuffix += '_export'
if repository.profileFileExtension.value:
profileName = skeinforge_profile.getProfileName(skeinforge_profile.getCraftTypeName())
if profileName:
fileNameSuffix += '.' + string.replace(profileName, ' ', '_')
if repository.descriptiveExtension.value:
fileNameSuffix += descriptiveExtension()
if repository.timestampExtension.value:
fileNameSuffix += '.'+strftime("%Y%m%d_%H%M%S")
if repository.archiveProfile.value:
profileName = skeinforge_profile.getProfileName(skeinforge_profile.getCraftTypeName())
if profileName:
profileZipFileName = fileNameSuffix + '.zip'
zipper(archive.getProfilesPath(skeinforge_profile.getProfileDirectory()), profileName+'/', profileZipFileName)
print('Profile archived to ' + profileZipFileName)
if repository.exportProfileAsCsv.value:
csvExportFilename = fileNameSuffix + '.csv'
archive.writeFileText(csvExportFilename, Condenser().readSettings())
fileNameSuffix += '.' + repository.fileExtension.value
gcodeText = gcodec.getGcodeFileText(fileName, '')
procedures = skeinforge_craft.getProcedures('export', gcodeText)
gcodeText = skeinforge_craft.getChainTextFromProcedures(fileName, procedures[ : - 1 ], gcodeText)
if gcodeText == '':
return None
fileNamePenultimate = fileName[: fileName.rfind('.')] + '_penultimate.gcode'
filePenultimateWritten = False
if repository.savePenultimateGcode.value:
archive.writeFileText(fileNamePenultimate, gcodeText)
filePenultimateWritten = True
print('The penultimate file is saved as ' + archive.getSummarizedFileName(fileNamePenultimate))
exportGcode = getCraftedTextFromText(gcodeText, repository)
window = None
if shouldAnalyze:
window = skeinforge_analyze.writeOutput(fileName, fileNamePenultimate, fileNameSuffix,
filePenultimateWritten, gcodeText)
replaceableExportGcode = None
selectedPluginModule = getSelectedPluginModule(repository.exportPlugins)
if selectedPluginModule is None:
replaceableExportGcode = exportGcode
else:
if selectedPluginModule.globalIsReplaceable:
replaceableExportGcode = selectedPluginModule.getOutput(exportGcode)
else:
selectedPluginModule.writeOutput(fileNameSuffix, exportGcode)
if replaceableExportGcode is not None:
replaceableExportGcode = getReplaceableExportGcode(repository.nameOfReplaceFile.value, replaceableExportGcode)
archive.writeFileText( fileNameSuffix, replaceableExportGcode )
print('The exported file is saved as ' + archive.getSummarizedFileName(fileNameSuffix))
if repository.alsoSendOutputTo.value != '':
if replaceableExportGcode is None:
replaceableExportGcode = selectedPluginModule.getOutput(exportGcode)
sendOutputTo(replaceableExportGcode, repository.alsoSendOutputTo.value)
print('It took %s to export the file.' % euclidean.getDurationString(time.time() - startTime))
return window