def main():
if len(sys.argv) != 3:
usage()
# Get the name of the interface to capture on
cfg_file = sys.argv[1]
src_intf = sys.argv[2]
optlist = BPFOptions(cfg_file)
bpf_instances = []
writer_instances = []
# pipe to handle kill signal. This uses the fd_reader node to signal
# to solarcapture when the process has been terminated.
r_fd, w_fd = os.pipe()
# used to handle end-of-capture signals (Ctrl-C)
def signal_handler(signum, frame):
try:
os.close(w_fd)
except OSError as ex:
if ex.errno != errno.EBADF:
raise
# Create a new session
# A session is an association between components that together form
# a single SolarCapture topology. This allows the application to
# start and stop the topology as a unit.
scs = sc.new_session()
# Create a thread to do the capture and writeout on
cthread = scs.new_thread()
# Create a VI on the capture thread.
vi = cthread.new_vi(src_intf)
# add the streams we want to capture to the VI. In this example, the VI
# will steal all traffic arriving on the interface
vi.add_stream(scs.new_stream("all"))
# Now, for each specified filter, create a filter node and a writer node
for bpf_filter, target_file in optlist.filters:
bpf_args = dict(bpf=bpf_filter)
bpf_instances.append(cthread.new_node("sc_filter", args=bpf_args))
writer_args = dict(filename=target_file, snap=SNAP_LEN)
writer_instances.append(cthread.new_node('sc_writer',
args=writer_args))
if optlist.unmatched_file:
# Create a writer node to catch all unmatched packets
unmatched_writer_args = dict(filename=optlist.unmatched_file,
snap=SNAP_LEN)
unmatched_writer = cthread.new_node('sc_writer',
args=unmatched_writer_args)
# Create signal handling and cleanup nodes
signal_vi = cthread.new_node('sc_signal_vi')
exiter = cthread.new_node('sc_exit')
reader = cthread.new_node('sc_fd_reader', args={'fd': r_fd})
# Connect nodes together to form node graph. Note that the i+1st filter
# is filtering on the packets rejected by the the ith filter:
# Connect Vi and signal handler
vi.connect(signal_vi)
reader.connect(signal_vi, 'ctl')
# Add in the first filter node and its associated writer
signal_vi.connect(bpf_instances[0])
bpf_instances[0].connect(writer_instances[0])
writer_instances[0].connect(exiter)
# If there is more than one BPF filter specified, then this section will
# handle chaining these together
n_instances = len(bpf_instances)
for i in range(1, (n_instances)):
bpf_instances[i - 1].connect("not_matched", bpf_instances[i])
bpf_instances[i].connect(writer_instances[i]).connect(exiter)
if optlist.unmatched_file:
sc.connect(bpf_instances[n_instances - 1], "not_matched",
unmatched_writer)
sc.connect(unmatched_writer, exiter)
# Kick off packet handling
scs.go()
# Add some signal handling
for signum in [signal.SIGINT, signal.SIGTERM, signal.SIGQUIT]:
signal.signal(signum, signal_handler)
while True:
time.sleep(1)
# main()
# Get command line arguments.
args = sys.argv[1:]
while args and args[0] and args[0][0] == '-':
if args[0] == '-h' or args[0] == '--help':
usage_msg(sys.stdout)
sys.exit(0)
else:
usage_err()
if len(args) != 3:
usage_err()
if_in = args[0]
if_out = args[1]
bpf_filter = args[2]
scs = sc.new_session()
thrd = scs.new_thread()
# Create a VI to capture received packets. Forward them via an sc_filter
# node to the destination interface.
vi = thrd.new_vi(if_in)
vi.add_stream(scs.new_stream("all"))
filter = thrd.new_node('sc_filter', args=dict(bpf=bpf_filter))
sc.connect(vi, filter)
sc.connect(filter, 'not_matched', to_interface=if_out)
scs.go()
while True:
time.sleep(10000)
def main():
if len(sys.argv) != 3:
usage()
# Get the name of the interface to capture on
cfg_file = sys.argv[1]
src_intf = sys.argv[2]
optlist = BPFOptions(cfg_file)
bpf_instances = []
writer_instances = []
# pipe to handle kill signal. This uses the fd_reader node to signal
# to solarcapture when the process has been terminated.
r_fd, w_fd = os.pipe()
# used to handle end-of-capture signals (Ctrl-C)
def signal_handler(signum, frame):
try:
os.close(w_fd)
except OSError as ex:
if ex.errno != errno.EBADF:
raise
# Create a new session
# A session is an association between components that together form
# a single SolarCapture topology. This allows the application to
# start and stop the topology as a unit.
scs = sc.new_session()
# Create a thread to do the capture and writeout on
cthread = scs.new_thread()
# Create a VI on the capture thread.
vi = cthread.new_vi(src_intf)
# add the streams we want to capture to the VI. In this example, the VI
# will steal all traffic arriving on the interface
vi.add_stream(scs.new_stream("all"))
# Now, for each specified filter, create a filter node and a writer node
for bpf_filter, target_file in optlist.filters:
bpf_args = dict(bpf=bpf_filter)
bpf_instances.append(cthread.new_node("sc_filter", args=bpf_args))
writer_args = dict(filename=target_file, snap=SNAP_LEN)
writer_instances.append(cthread.new_node('sc_writer',
args=writer_args))
if optlist.unmatched_file:
# Create a writer node to catch all unmatched packets
unmatched_writer_args = dict(filename=optlist.unmatched_file,
snap=SNAP_LEN)
unmatched_writer = cthread.new_node('sc_writer',
args=unmatched_writer_args)
# Create signal handling and cleanup nodes
signal_vi = cthread.new_node('sc_signal_vi')
exiter = cthread.new_node('sc_exit')
reader = cthread.new_node('sc_fd_reader', args={'fd': r_fd})
# Connect nodes together to form node graph. Note that the i+1st filter
# is filtering on the packets rejected by the the ith filter:
# Connect Vi and signal handler
vi.connect(signal_vi)
reader.connect(signal_vi, 'ctl')
# Add in the first filter node and its associated writer
signal_vi.connect(bpf_instances[0])
bpf_instances[0].connect(writer_instances[0])
writer_instances[0].connect(exiter)
# If there is more than one BPF filter specified, then this section will
# handle chaining these together
n_instances = len(bpf_instances)
for i in range(1, (n_instances)):
bpf_instances[i-1].connect("not_matched", bpf_instances[i])
bpf_instances[i].connect(writer_instances[i]).connect(exiter)
if optlist.unmatched_file:
sc.connect(bpf_instances[n_instances-1], "not_matched",
unmatched_writer)
sc.connect(unmatched_writer, exiter)
# Kick off packet handling
scs.go()
# Add some signal handling
for signum in [signal.SIGINT, signal.SIGTERM, signal.SIGQUIT]:
signal.signal(signum, signal_handler)
while True:
time.sleep(1)
# main()
# Get command line arguments.
args = sys.argv[1:]
while args and args[0] and args[0][0] == '-':
if args[0] == '-h' or args[0] == '--help':
usage_msg(sys.stdout)
sys.exit(0)
else:
usage_err()
if len(args) != 3:
usage_err()
if_in = args[0]
if_out = args[1]
bpf_filter = args[2]
scs = sc.new_session()
thrd = scs.new_thread()
# Create a VI to capture received packets. Forward them via an sc_filter
# node to the destination interface.
vi = thrd.new_vi(if_in)
vi.add_stream(scs.new_stream("all"))
filter = thrd.new_node('sc_filter', args=dict(bpf=bpf_filter))
sc.connect(vi, filter)
sc.connect(filter, 'not_matched', to_interface=if_out)
scs.go()
while True:
time.sleep(10000)
# Get command line arguments.
args = sys.argv[1:]
while args and args[0] and args[0][0] == '-':
if args[0] == '-h' or args[0] == '--help':
usage_msg(sys.stdout)
sys.exit(0)
else:
usage_err()
if len(args) != 1:
usage_err()
interface = args[0]
scs = sc.new_session()
thrd = scs.new_thread()
# Create a VI to capture received packets. Filter out multicast and
# broadcast, and forward unicast to a reflect node and then back out of the
# same interface.
vi = thrd.new_vi(interface)
vi.add_stream(scs.new_stream("all"))
pipeline = vi
pipeline = sc.connect(
pipeline, thrd.new_node('sc_filter', args=dict(bpf='not multicast')))
pipeline = sc.connect(pipeline, thrd.new_node('reflect'))
pipeline = sc.connect(pipeline, to_interface=interface)
scs.go()
while True:
time.sleep(10000)
if_pairs = []
for arg in args:
if arg == '-h' or arg == '--help':
usage_msg(sys.stdout)
sys.exit(0)
ifs = arg.split(':')
if len(ifs) != 2:
usage_err()
if_pairs.append(ifs)
if not if_pairs:
usage_err()
# Create a session and a thread.
scs = sc.new_session()
thrd = scs.new_thread()
for intf_a, intf_b in if_pairs:
# Create a VI on each interface to capture received packets.
vi_a = thrd.new_vi(intf_a)
vi_a.add_stream(scs.new_stream("all"))
vi_b = thrd.new_vi(intf_b)
vi_b.add_stream(scs.new_stream("all"))
# Forward packets to the other interface.
sc.connect(vi_a, to_interface=intf_b)
sc.connect(vi_b, to_interface=intf_a)
scs.go()
while True:
time.sleep(10000)
if_pairs = []
for arg in args:
if arg == '-h' or arg == '--help':
usage_msg(sys.stdout)
sys.exit(0)
ifs = arg.split(':')
if len(ifs) != 2:
usage_err()
if_pairs.append(ifs)
if not if_pairs:
usage_err()
# Create a session and a thread.
scs = sc.new_session()
thrd = scs.new_thread()
for intf_a, intf_b in if_pairs:
# Create a VI on each interface to capture received packets.
vi_a = thrd.new_vi(intf_a)
vi_a.add_stream(scs.new_stream("all"))
vi_b = thrd.new_vi(intf_b)
vi_b.add_stream(scs.new_stream("all"))
# Forward packets to the other interface.
sc.connect(vi_a, to_interface=intf_b)
sc.connect(vi_b, to_interface=intf_a)
scs.go()
while True:
time.sleep(10000)
# Get command line arguments.
args = sys.argv[1:]
while args and args[0] and args[0][0] == '-':
if args[0] == '-h' or args[0] == '--help':
usage_msg(sys.stdout)
sys.exit(0)
else:
usage_err()
if len(args) != 1:
usage_err()
interface = args[0]
scs = sc.new_session()
thrd = scs.new_thread()
# Create a VI to capture received packets. Filter out multicast and
# broadcast, and forward unicast to a reflect node and then back out of the
# same interface.
vi = thrd.new_vi(interface)
vi.add_stream(scs.new_stream("all"))
pipeline = vi
pipeline = sc.connect(pipeline, thrd.new_node('sc_filter',
args=dict(bpf='not multicast')))
pipeline = sc.connect(pipeline, thrd.new_node('reflect'))
pipeline = sc.connect(pipeline, to_interface=interface)
scs.go()
while True:
time.sleep(10000)
def main(args):
# Get command line arguments.
two_threads = True
while args and args[0] and args[0][0] == '-':
if args[0] == '-h' or args[0] == '--help':
usage_msg(sys.stdout)
sys.exit(0)
elif args[0] == '--single-thread':
two_threads = False
args.pop(0)
else:
usage_err()
if len(args) != 2:
usage_err()
intf = args[0]
filename = args[1]
# A SolarCapture session binds together a set of threads and components
# that are doing a particular job.
scs = sc.new_session()
# Create the threads that will be used for capture and writing to disk.
# It is usually a good idea to keep these in separate threads, as
# otherwise writing to disk can block capture for long periods of time,
# leading to packet loss in some configurations.
cap_thread = scs.new_thread()
if two_threads:
writer_thread = scs.new_thread()
else:
writer_thread = cap_thread
# Create a VI, which is used to receive packets from the network
# adapter.
vi = cap_thread.new_vi(intf)
# Add the streams we want to capture. This VI will capture all packets
# arriving at the interface (except for any streams explicitly steered
# elsewhere).
vi.add_stream(scs.new_stream('all'))
# SolarCapture nodes perform packet processing functions such as
# monitoring, packet modification, writing to disk, I/O etc. When
# allocating nodes you can specify node-specific arguments, which may
# be required or optional.
#
# The 'sc_writer' node writes packets to disk in pcap format. The
# 'snap' argument indicates the maximum number of bytes of each packet
# that should be saved in the capture file.
writer_args = dict(filename=filename, snap=60)
writer = writer_thread.new_node('sc_writer', args=writer_args)
# Connect the VI to the writer node.
sc.connect(vi, writer)
# Once we have created the necessary components, and linked them
# together as desired, we kick off the actual packet handling. This
# call starts the managed threads and begins packet processing.
scs.go()
# Stop python from swallowing SIGINT!
signal.signal(signal.SIGINT, signal.SIG_DFL)
while True:
time.sleep(10000)
def main(args):
# Get command line arguments.
two_threads = True
while args and args[0] and args[0][0] == '-':
if args[0] == '-h' or args[0] == '--help':
usage_msg(sys.stdout)
sys.exit(0)
elif args[0] == '--single-thread':
two_threads = False
args.pop(0)
else:
usage_err()
if len(args) != 2:
usage_err()
intf = args[0]
filename = args[1]
# A SolarCapture session binds together a set of threads and components
# that are doing a particular job.
scs = sc.new_session()
# Create the threads that will be used for capture and writing to disk.
# It is usually a good idea to keep these in separate threads, as
# otherwise writing to disk can block capture for long periods of time,
# leading to packet loss in some configurations.
cap_thread = scs.new_thread()
if two_threads:
writer_thread = scs.new_thread()
else:
writer_thread = cap_thread
# Create a VI, which is used to receive packets from the network
# adapter.
vi = cap_thread.new_vi(intf)
# Add the streams we want to capture. This VI will capture all packets
# arriving at the interface (except for any streams explicitly steered
# elsewhere).
vi.add_stream(scs.new_stream('all'))
# SolarCapture nodes perform packet processing functions such as
# monitoring, packet modification, writing to disk, I/O etc. When
# allocating nodes you can specify node-specific arguments, which may
# be required or optional.
#
# The 'sc_writer' node writes packets to disk in pcap format. The
# 'snap' argument indicates the maximum number of bytes of each packet
# that should be saved in the capture file.
writer_args = dict(filename=filename, snap=60)
writer = writer_thread.new_node('sc_writer', args=writer_args)
# Connect the VI to the writer node.
sc.connect(vi, writer)
# Once we have created the necessary components, and linked them
# together as desired, we kick off the actual packet handling. This
# call starts the managed threads and begins packet processing.
scs.go()
# Stop python from swallowing SIGINT!
signal.signal(signal.SIGINT, signal.SIG_DFL)
while True:
time.sleep(10000)