def slice_callback(unused_addr, args, the_OSC_message_argument):
D("SliceCallback")
#print("{} {} {} ".format(unused_addr, args, the_obj))
message_ok = True
if (len(unused_addr) != 15):
message_ok = False
loop_i = -1
slice_i = -1
new_mode = 'NOT-SET'
the_status_obj = args[0]
#probably should do a type() check here on the_status_obj
try:
loop_s = unused_addr[6]
slice_s = unused_addr[14]
loop_i = int(loop_s)
slice_i = int(slice_s)
except Exception as jeje:
L("exception in handling OSC message {}".format(unused_addr))
L("Exception: {}".format(jeje))
L("{}".format(repr(jeje)))
message_ok = False
if (loop_i > 4 or loop_i < 1):
D("Loop value out of range {} ".format(loop_i))
#do nothing
message_ok = False
if (slice_i < 0 or slice_i > 7):
D("slice value out of range {} ".format(slice_i))
#do nothing
message_ok = False
#check is the_OSC_message_argument is a correct slice mode
new_slice_mode = the_OSC_message_argument
if not MODES.is_valid_mode(new_slice_mode):
message_ok = False
if (message_ok):
set_slice_mode(loop_i, slice_i, new_slice_mode, the_status_obj)
the_status_obj.set_osc_message("{} : {} DONE".format(
unused_addr, the_OSC_message_argument))
else:
# log error message
#TODO fix this error message
L("unable to parse message {} {} ".format(unused_addr,
the_OSC_message_argument))
the_status_obj.set_osc_message("{} : {} FAIL".format(
unused_addr, the_OSC_message_argument))
return
#print("Loop:{} slice:{}".format(loop_i,slice_i))
return
def stop_audio(self):
""" Stop the audio callback. we want to exit cleanly using this"""
L("Stopping Audio Engine")
self.stream.stop_stream()
self.stream.close()
p.terminate()
return
def start_audio(self):
"""Start the audio stream. setup the callbacks then enter a loop. """
L("Starting Audio Engine")
self.stream = p.open(
format=pyaudio.paFloat32, channels=2, rate=44100,
output=True, stream_callback=self.audio_callback)
self.stream.start_stream()
return
def loop_mode_callback(unused_addr, args, the_OSC_message_argument):
D("LoopCallback")
#print("{} {} {} ".format(unused_addr, args, the_obj))
message_ok = True
if (len(unused_addr) != 12):
message_ok = False
loop_i = -1
new_mode = 'NOT-SET'
the_status_obj = args[0]
try:
loop_s = unused_addr[6]
loop_i = int(loop_s)
except Exception as jeje:
L("exception in handling OSC message {}".format(unused_addr))
L("Exception: {}".format(jeje))
L("{}".format(repr(jeje)))
message_ok = False
if (loop_i > 4 or loop_i < 1):
D("Loop value out of range {} ".format(loop_i))
#do nothing
message_ok = False
new_slice_mode = the_OSC_message_argument
if not LM.is_valid_mode(new_slice_mode):
message_ok = False
if (message_ok):
set_loop_mode(loop_i, new_slice_mode, the_status_obj)
the_status_obj.set_osc_message("{} : {} DONE".format(
unused_addr, the_OSC_message_argument))
else:
# log error message
#TODO fix this error message
L("unable to parse message {} {} ".format(unused_addr,
the_OSC_message_argument))
the_status_obj.set_osc_message("{} : {} FAIL".format(
unused_addr, the_OSC_message_argument))
return
#print("Loop:{} slice:{}".format(loop_i,slice_i))
return
def loop_volume_callback(unused_addr, args, the_OSC_message_argument):
D("loop_volume_callback")
#set the volume level of a loop.
#.set_volume(float)
#range 0.0 - 1.0
# if(len(unused_addr) != 12):
# message_ok = False
loop_i = -1
new_volume_level = -1.0
message_ok = True
the_status_obj = args[0]
#get the loop id. /loop/*
try:
loop_s = unused_addr[6]
loop_i = int(loop_s)
except Exception as jeje:
L("exception in handling OSC message {}".format(unused_addr))
L("Exception: {}".format(jeje))
L("{}".format(repr(jeje)))
message_ok = False
if (loop_i > 4 or loop_i < 1):
D("Loop value out of range {} ".format(loop_i))
#do nothing
message_ok = False
#convert the argument to a float.
try:
new_volume_level = float(the_OSC_message_argument)
if (new_volume_level < 0.0):
message_ok = False
#float parsing error handling.
except Exception as flt_error:
L("exception handing OSC message {}".format(unused_addr))
L("exception parsing {}".format(the_OSC_message_argument))
L("Exception: {}".format(flt_error))
L("{}".format(rep(flt_error)))
message_ok = False
if (message_ok):
set_loop_volume(loop_i, new_volume_level, the_status_obj)
the_status_obj.set_osc_message("{} : {} DONE".format(
unused_addr, the_OSC_message_argument))
else:
# log error message
#TODO fix this error message
L("unable to parse message {} {} ".format(unused_addr,
the_OSC_message_argument))
the_status_obj.set_osc_message("{} : {} FAIL".format(
unused_addr, the_OSC_message_argument))
return
def loop_file_callback(unused_addr, args, the_OSC_message_argument):
D("loop file callback")
# has an argument of an int.
message_ok = True
the_status_obj = args[0]
#get the loop id. /loop/*
try:
loop_s = unused_addr[6]
loop_i = int(loop_s)
# get the track index
new_track_index = int(the_OSC_message_argument)
except Exception as errerr:
L("exception with loop_file_callback ")
L("Error: {}".format(errerr))
message_ok = False
return
if (loop_i not in range(1, 5)):
message_ok = False
if (message_ok):
try_load_new_file_by_int(loop_i, new_track_index, the_status_obj)
the_status_obj.set_osc_message("{} : {} DONE".format(
unused_addr, the_OSC_message_argument))
D("loop_file_callback {} {}".format(loop_i, new_track_index))
else:
L("message not processed. loop_file_callback")
L("Message received {}".format(the_OSC_message_argument))
L("Message Received {} ".format(unused_addr))
L("Message Received {}".format(args))
the_status_obj.set_osc_message("{} : {} FAIL".format(
unused_addr, the_OSC_message_argument))
return
def loop_jump_callback(unused_addr, args, the_OSC_message_argument):
D("loop jump callback")
message_ok = True
if (len(unused_addr) != 12):
message_ok = False
the_status_obj = args[0]
try:
loop_s = unused_addr[6]
loop_i = int(loop_s)
jump_i = int(the_OSC_message_argument)
except Exception as jj:
L("Exception parsing {} {}".format(unused_addr),
the_OSC_message_argument)
L("Exception {} ".format(jj))
message_ok = False
loop_i = -1
jump_i = -1
if (loop_i > 4 or loop_i < 1):
D("Loop value out of range {} ".format(loop_i))
message_ok = False
if (jump_i > 7 or jump_i < 0):
D("jump value out of range {}".format(jump_i))
message_ok = False
if (message_ok):
set_loop_jump(loop_i, jump_i, the_status_obj)
the_status_obj.set_osc_message("{} : {} DONE".format(
unused_addr, the_OSC_message_argument))
else:
# log error message
#TODO fix this error message
L("unable to parse message {} {} ".format(unused_addr,
the_OSC_message_argument))
the_status_obj.set_osc_message("{} : {} FAIL".format(
unused_addr, the_OSC_message_argument))
return
def start_OSC_server(spoon_status_object):
disp = dispatcher.Dispatcher()
disp.map("/loop/*/slice/*", slice_callback, spoon_status_object)
disp.map("/loop/*/mode", loop_mode_callback, spoon_status_object)
disp.set_default_handler(default_callback)
new_osc_port = spoon_status_object.osc_port
server = osc_server.ThreadingOSCUDPServer( ("127.0.0.1", new_osc_port), disp)
server_thread = threading.Thread(target=server.serve_forever)
server_thread.start()
L("Serving on {}".format(server.server_address))
#return the server and thread so we can shut it down when we quit
# server.shutdown()
return server , server_thread
def test_file_correctness(audio_file_path):
#TODO make this actually test the file
#returns true if the file is OK. false otherwise
# D("trying to open: {}".format(audio_file_path))
try:
j = soundfile.info(audio_file_path)
# D("{} : soundfile info {}".format(audio_file_path, str(j)))
#TODO add more supported formats in a future time
if (j.samplerate == 44100 and j.channels == 2):
L("File {} is OK.".format(audio_file_path))
return True
else:
W("File {} is NOT OK. Sample rate is {} and channels are {}".
format(audio_file_path, j.samplerate, j.channels))
return False
except Exception as e:
W("Error opening file {}. Message was {}".format(
audio_file_path, repr(e)))
#if we have got to this point, we've failed the try/except so there is a filepath or permissions problem. return False
return False
def toggle_mute(self):
# toggles the mute state
# returns the new mute state.
self.mute = (not self.mute)
L("Mute state toggled. new state {}".format(str(self.mute)))
return self.mute
def default_callback(unused_addr, args):
L("unknown message {} {}".format(unused_addr, args))
return