def __init__(self, sputtergun):
super(SimplePlot, self).__init__()
self.sputtergun = sputtergun
# Set up the user interface from Designer.
self.gui = Ui_Specs()
self.gui.setupUi(self)
# Init local variables
self.scale = 1E-8
self.active = False
self.start = None
self.plot_length = 200
# Set up plot (using pretty much all the possible options)
self.plots_l = ['filament_current', 'emission_current']
self.plots_r = ['sputter_current']
self.plotter = DataPlotter(self.plots_l,
right_plotlist=self.plots_r,
parent=self,
left_log=False,
title='Ion Gun Data',
yaxis_left_label='Currents',
yaxis_right_label='Noisy line',
xaxis_label='Time since start [s]',
legend='right',
left_thickness=[2, 8],
right_thickness=6,
left_colors=['firebrick', 'darkolivegreen'],
right_colors=['darksalmon'])
self.gui.horizontalLayout.removeWidget(self.gui.place_holder_qwt)
self.gui.place_holder_qwt.setParent(None)
self.gui.horizontalLayout.addWidget(self.plotter.plot)
# Connect signals
QtCore.QObject.connect(self.gui.operate_button,
QtCore.SIGNAL('clicked()'), self.on_operate)
QtCore.QObject.connect(self.gui.standby_button,
QtCore.SIGNAL('clicked()'), self.on_standby)
QtCore.QObject.connect(self.gui.start_button,
QtCore.SIGNAL('clicked()'), self.on_start)
QtCore.QObject.connect(self.gui.stop_button,
QtCore.SIGNAL('clicked()'), self.on_stop)
QtCore.QObject.connect(self.gui.quit_button,
QtCore.SIGNAL('clicked()'),
QtCore.QCoreApplication.instance().quit)
def __init__(self, sputtergun):
super(SimplePlot, self).__init__()
self.sputtergun = sputtergun
# Set up the user interface from Designer.
self.gui = Ui_Specs()
self.gui.setupUi(self)
# Init local variables
self.scale = 1E-8
self.active = False
self.start = None
self.plot_length = 200
# Set up plot (using pretty much all the possible options)
self.plots_l = ['filament_current', 'emission_current']
self.plots_r = ['sputter_current']
self.plotter = DataPlotter(
self.plots_l, right_plotlist=self.plots_r, parent=self,
left_log=False, title='Ion Gun Data',
yaxis_left_label='Currents', yaxis_right_label='Noisy line',
xaxis_label='Time since start [s]',
legend='right', left_thickness=[2, 8], right_thickness=6,
left_colors=['firebrick', 'darkolivegreen'],
right_colors=['darksalmon'])
self.gui.horizontalLayout.removeWidget(self.gui.place_holder_qwt)
self.gui.place_holder_qwt.setParent(None)
self.gui.horizontalLayout.addWidget(self.plotter.plot)
# Connect signals
QtCore.QObject.connect(self.gui.operate_button,
QtCore.SIGNAL('clicked()'),
self.on_operate)
QtCore.QObject.connect(self.gui.standby_button,
QtCore.SIGNAL('clicked()'),
self.on_standby)
QtCore.QObject.connect(self.gui.start_button,
QtCore.SIGNAL('clicked()'),
self.on_start)
QtCore.QObject.connect(self.gui.stop_button,
QtCore.SIGNAL('clicked()'),
self.on_stop)
QtCore.QObject.connect(self.gui.quit_button,
QtCore.SIGNAL('clicked()'),
QtCore.QCoreApplication.instance().quit)
class SimplePlot(QWidget):
"""Simple example with a Qwt plot in a Qt GUI"""
def __init__(self, sputtergun):
super(SimplePlot, self).__init__()
self.sputtergun = sputtergun
# Set up the user interface from Designer.
self.gui = Ui_Specs()
self.gui.setupUi(self)
# Init local variables
self.scale = 1E-8
self.active = False
self.start = None
self.plot_length = 200
# Set up plot (using pretty much all the possible options)
self.plots_l = ['filament_current', 'emission_current']
self.plots_r = ['sputter_current']
self.plotter = DataPlotter(self.plots_l,
right_plotlist=self.plots_r,
parent=self,
left_log=False,
title='Ion Gun Data',
yaxis_left_label='Currents',
yaxis_right_label='Noisy line',
xaxis_label='Time since start [s]',
legend='right',
left_thickness=[2, 8],
right_thickness=6,
left_colors=['firebrick', 'darkolivegreen'],
right_colors=['darksalmon'])
self.gui.horizontalLayout.removeWidget(self.gui.place_holder_qwt)
self.gui.place_holder_qwt.setParent(None)
self.gui.horizontalLayout.addWidget(self.plotter.plot)
# Connect signals
QtCore.QObject.connect(self.gui.operate_button,
QtCore.SIGNAL('clicked()'), self.on_operate)
QtCore.QObject.connect(self.gui.standby_button,
QtCore.SIGNAL('clicked()'), self.on_standby)
QtCore.QObject.connect(self.gui.start_button,
QtCore.SIGNAL('clicked()'), self.on_start)
QtCore.QObject.connect(self.gui.stop_button,
QtCore.SIGNAL('clicked()'), self.on_stop)
QtCore.QObject.connect(self.gui.quit_button,
QtCore.SIGNAL('clicked()'),
QtCore.QCoreApplication.instance().quit)
def on_start(self):
"""Start button method"""
print 'start pressed'
if not self.active:
self.start = time.time()
self.active = True
# Reset plot
for key in self.plotter.data.keys():
self.plotter.data[key] = []
QtCore.QTimer.singleShot(0, self.plot_iteration)
def on_standby(self):
"""Standby button method"""
self.sputtergun.goto_standby = True
def on_operate(self):
"""Standby button method"""
self.sputtergun.goto_operate = True
print "!"
def on_stop(self):
"""Stop button method"""
print 'stop pressed'
self.active = False
def plot_iteration(self):
"""method that emulates a single data gathering and plot update"""
elapsed = time.time() - self.start
#print str(elapsed) + ' current ' + str(self.sputtergun.status['sputter_current'])
#print str(elapsed) + ' bias ' + str(self.sputtergun.status['filament_bias'])
if self.sputtergun.status['sputter_current'] is not None:
self.gui.sputter_current.setProperty(
"text",
str(self.sputtergun.status['sputter_current']) + 'mA')
self.gui.filament_bias.setProperty(
"text",
str(self.sputtergun.status['filament_bias']) + 'V')
self.gui.temp_energy_module.setProperty(
"text",
str(self.sputtergun.status['temperature']) + 'C')
self.gui.filament_current.setProperty(
"text",
str(self.sputtergun.status['filament_current']) + 'mA')
self.gui.accel_voltage.setProperty(
"text",
str(self.sputtergun.status['accel_voltage']) + 'V')
self.gui.emission_current.setProperty(
"text",
str(self.sputtergun.status['emission_current']) + 'mA')
else:
self.gui.sputter_current.setProperty("value", '-')
self.gui.filament_bias.setProperty("text", '-')
self.gui.temp_energy_module.setProperty("text", '-')
self.gui.filament_current.setProperty("text", '-')
self.gui.accel_voltage.setProperty("text", '-')
self.gui.emission_current.setProperty("text", '-')
self.gui.operate_button.setProperty('checked',
self.sputtergun.status['operate'])
print self.sputtergun.status['operate']
self.gui.standby_button.setProperty('checked',
self.sputtergun.status['standby'])
if elapsed <= self.plot_length:
try:
self.plotter.add_point(
'sputter_current',
(elapsed, self.sputtergun.status['sputter_current']))
self.plotter.add_point(
'filament_current',
(elapsed, self.sputtergun.status['filament_current']))
self.plotter.add_point(
'emission_current',
(elapsed, self.sputtergun.status['emission_current']))
except TypeError:
pass
else:
self.active = False
if self.active:
# Under normal curcumstances we would not add a delay
QtCore.QTimer.singleShot(500, self.plot_iteration)
class SimplePlot(QWidget):
"""Simple example with a Qwt plot in a Qt GUI"""
def __init__(self, sputtergun):
super(SimplePlot, self).__init__()
self.sputtergun = sputtergun
# Set up the user interface from Designer.
self.gui = Ui_Specs()
self.gui.setupUi(self)
# Init local variables
self.scale = 1E-8
self.active = False
self.start = None
self.plot_length = 200
# Set up plot (using pretty much all the possible options)
self.plots_l = ['filament_current', 'emission_current']
self.plots_r = ['sputter_current']
self.plotter = DataPlotter(
self.plots_l, right_plotlist=self.plots_r, parent=self,
left_log=False, title='Ion Gun Data',
yaxis_left_label='Currents', yaxis_right_label='Noisy line',
xaxis_label='Time since start [s]',
legend='right', left_thickness=[2, 8], right_thickness=6,
left_colors=['firebrick', 'darkolivegreen'],
right_colors=['darksalmon'])
self.gui.horizontalLayout.removeWidget(self.gui.place_holder_qwt)
self.gui.place_holder_qwt.setParent(None)
self.gui.horizontalLayout.addWidget(self.plotter.plot)
# Connect signals
QtCore.QObject.connect(self.gui.operate_button,
QtCore.SIGNAL('clicked()'),
self.on_operate)
QtCore.QObject.connect(self.gui.standby_button,
QtCore.SIGNAL('clicked()'),
self.on_standby)
QtCore.QObject.connect(self.gui.start_button,
QtCore.SIGNAL('clicked()'),
self.on_start)
QtCore.QObject.connect(self.gui.stop_button,
QtCore.SIGNAL('clicked()'),
self.on_stop)
QtCore.QObject.connect(self.gui.quit_button,
QtCore.SIGNAL('clicked()'),
QtCore.QCoreApplication.instance().quit)
def on_start(self):
"""Start button method"""
print 'start pressed'
if not self.active:
self.start = time.time()
self.active = True
# Reset plot
for key in self.plotter.data.keys():
self.plotter.data[key] = []
QtCore.QTimer.singleShot(0, self.plot_iteration)
def on_standby(self):
"""Standby button method"""
self.sputtergun.goto_standby = True
def on_operate(self):
"""Standby button method"""
self.sputtergun.goto_operate = True
print "!"
def on_stop(self):
"""Stop button method"""
print 'stop pressed'
self.active = False
def plot_iteration(self):
"""method that emulates a single data gathering and plot update"""
elapsed = time.time() - self.start
#print str(elapsed) + ' current ' + str(self.sputtergun.status['sputter_current'])
#print str(elapsed) + ' bias ' + str(self.sputtergun.status['filament_bias'])
if self.sputtergun.status['sputter_current'] is not None:
self.gui.sputter_current.setProperty("text", str(self.sputtergun.status['sputter_current']) + 'mA')
self.gui.filament_bias.setProperty("text", str(self.sputtergun.status['filament_bias']) + 'V')
self.gui.temp_energy_module.setProperty("text", str(self.sputtergun.status['temperature']) + 'C')
self.gui.filament_current.setProperty("text", str(self.sputtergun.status['filament_current']) + 'mA')
self.gui.accel_voltage.setProperty("text", str(self.sputtergun.status['accel_voltage']) + 'V')
self.gui.emission_current.setProperty("text", str(self.sputtergun.status['emission_current']) + 'mA')
else:
self.gui.sputter_current.setProperty("value", '-')
self.gui.filament_bias.setProperty("text", '-')
self.gui.temp_energy_module.setProperty("text", '-')
self.gui.filament_current.setProperty("text", '-')
self.gui.accel_voltage.setProperty("text", '-')
self.gui.emission_current.setProperty("text", '-')
self.gui.operate_button.setProperty('checked', self.sputtergun.status['operate'])
print self.sputtergun.status['operate']
self.gui.standby_button.setProperty('checked', self.sputtergun.status['standby'])
if elapsed <= self.plot_length:
try:
self.plotter.add_point('sputter_current', (elapsed, self.sputtergun.status['sputter_current']))
self.plotter.add_point('filament_current', (elapsed, self.sputtergun.status['filament_current']))
self.plotter.add_point('emission_current', (elapsed, self.sputtergun.status['emission_current']))
except TypeError:
pass
else:
self.active = False
if self.active:
# Under normal curcumstances we would not add a delay
QtCore.QTimer.singleShot(500, self.plot_iteration)