def simulate_example(I_e):
simTime = 1000. # ms
my_nest.ResetKernel()
model_list, model_dict = models()
my_nest.MyLoadModels(model_list, NEURON_MODELS)
I_e0 = my_nest.GetDefaults(NEURON_MODELS[0])['I_e']
SNR = MyGroup(NEURON_MODELS[0],
1,
sd=True,
mm=True,
mm_dt=1.,
params={'I_e': I_e + I_e0})
my_nest.MySimulate(simTime)
SNR.get_signal('v', 'V_m', stop=simTime) # retrieve signal
SNR.get_signal('s') # retrieve signal
meanRate = round(SNR.signals['spikes'].mean_rate(0, 1000), 1)
print SNR.signals['spikes'].isi()
SNR.signals['V_m'].my_set_spike_peak(21, spkSignal=SNR.signals['spikes'])
s = '\n'
s = s + 'Example:\n'
s = s + ' %s %5s %3s %s %5s %3s \n' % ('Mean rate:', meanRate, 'Hz', 'I_e',
I_e, 'pA')
infoString = s
return SNR, infoString
def simulate_response_example_clamped_spiking(I_e):
'''
Response when SNR is clamped to a voltage for strong and weak synapse
'''
spike_at = 500. # ms
simTime = 700. # ms
my_nest.ResetKernel()
model_list = models()
my_nest.MyLoadModels(model_list, NEURON_MODELS)
my_nest.MyLoadModels(model_list, SYNAPES_MODELS)
SNR = MyGroup(NEURON_MODELS[0],
len(SYNAPES_MODELS) + 1,
mm=True,
mm_dt=0.1,
params={'I_e': I_e})
SG = my_nest.Create('spike_generator', params={'spike_times': [spike_at]})
for i in range(len(SYNAPES_MODELS)):
my_nest.Connect(SG, [SNR[i]], model=SYNAPES_MODELS[i])
my_nest.MySimulate(simTime)
SNR.get_signal('v', 'V_m', stop=simTime) # retrieve signal
SNR.signals['V_m'] = SNR.signals['V_m'].my_time_slice(500, 560)
return SNR
def simulate_steady_state_freq(frequencies, flag='ss'):
global sname_nb
relativeFacilitation=[]
model_list=models()
data={}
n=len(frequencies)
for syn in synapseModels:
my_nest.ResetKernel()
my_nest.MyLoadModels( model_list, neuronModels )
my_nest.MyLoadModels( model_list, [syn])
ss=my_nest.GetDefaults(syn)
synapticEficacy = ss['weight']*ss['U']
SNR = MyGroup( neuronModels[0], n, mm_dt = .1, params={'I_e':-150.},
record_from=['g_GABAA_2'], spath=spath,
sname_nb=sname_nb )
sname_nb+=1
tSim=3*1000/frequencies[0]
spikeTimes=[]
for f in frequencies :
isi = 1000./f
spikeTimes.append(numpy.arange(1,tSim,isi))
if not LOAD:
for target, st in zip(SNR, spikeTimes ) :
source = my_nest.Create('spike_generator',
params={'spike_times':st} )
my_nest.SetDefaults(syn, params={'delay':1.})
my_nest.Connect(source, [target], model=syn)
my_nest.MySimulate(tSim)
SNR.get_signal( 'g','g_GABAA_2', stop=tSim ) # retrieve signal
SNR.save_signal( 'g','g_GABAA_2', stop=tSim )
elif LOAD:
SNR.load_signal( 'g','g_GABAA_2')
signal=SNR.signals['g_GABAA_2']
tmpSteadyState=[]
for i, st in enumerate(spikeTimes, start=1):
if SNR.mm_dt==0.1: indecies=numpy.int64(numpy.ceil(st*10))+9
elif SNR.mm_dt==1.: indecies=numpy.int64(numpy.ceil(st))
values=signal[i].signal[indecies]-signal[i].signal[indecies-1]
if flag=='ss': tmpSteadyState.append(values[-1]/synapticEficacy)
if flag=='max': tmpSteadyState.append(max(values)/synapticEficacy)
relativeFacilitation.append(tmpSteadyState)
relativeFacilitation=numpy.array(relativeFacilitation)
return frequencies, relativeFacilitation
def simulate_recovery(revoceryTimes):
global sname_nb
relativeRecovery=[]
model_list=models()
data={}
n=len(revoceryTimes)
for syn in synapseModels:
my_nest.ResetKernel()
my_nest.MyLoadModels( model_list, neuronModels )
my_nest.MyLoadModels( model_list, [syn])
ss=my_nest.GetDefaults(syn)
synapticEficacy = ss['weight']*ss['U']
SNR = MyGroup( neuronModels[0], n, mm_dt = .1, params={'I_e':-150.},
record_from=['g_GABAA_2'], spath=spath,
sname_nb=sname_nb)
sname_nb+=1
tSim=5000
spikeTimes=[]
for rt in revoceryTimes:
spikeTimes.append(numpy.array([1.,11.,21.,31.,41.,41+rt]))
if not LOAD:
for target, st in zip(SNR, spikeTimes ) :
source = my_nest.Create('spike_generator',
params={'spike_times':st} )
my_nest.SetDefaults(syn, params={'delay':1.})
my_nest.Connect(source, [target], model=syn)
my_nest.MySimulate(tSim)
SNR.get_signal( 'g','g_GABAA_2', stop=tSim ) # retrieve signal
SNR.save_signal( 'g','g_GABAA_2', stop=tSim )
elif LOAD:
SNR.load_signal( 'g','g_GABAA_2')
signal=SNR.signals['g_GABAA_2']
tmpSteadyState=[]
for i, st in enumerate(spikeTimes, start=1):
if SNR.mm_dt==0.1: indecies=numpy.int64(numpy.ceil(st*10))+9
elif SNR.mm_dt==1.: indecies=numpy.int64(numpy.ceil(st))
values=signal[i].signal[indecies]-signal[i].signal[indecies-1]
tmpSteadyState.append(values[-1]/synapticEficacy)
#tmpSteadyState.append(max(values)/synapticEficacy)
relativeRecovery.append(tmpSteadyState)
relativeRecovery=numpy.array(relativeRecovery)
return revoceryTimes, relativeRecovery
def simulate_basa_line_STN(ctx_rate,
gpe_rate,
n_ctx,
n_gpe,
neuron_model,
syn_models,
stn_current,
sim_time=1000,
threads=8,
w_GPE_STN=0):
Params_in = {}
if w_GPE_STN: Params_in['GPE_STN_gaba_s'] = w_GPE_STN
model_list, model_dict = models(Params_in)
my_nest.ResetKernel(threads=threads)
my_nest.MyLoadModels(model_dict, neuron_model)
my_nest.MyLoadModels(model_dict, syn_models)
SNR_list = [] # List with SNR groups for synapse.
if n_ctx > 0: CTX = MyPoissonInput(n=n_ctx, sd=True)
if n_gpe > 0: GPE = MyPoissonInput(n=n_gpe, sd=False)
if n_ctx > 0:
CTX.set_spike_times(rates=[ctx_rate],
times=[1],
t_stop=sim_time,
seed=0)
if n_gpe > 0:
GPE.set_spike_times(rates=[gpe_rate],
times=[1],
t_stop=sim_time,
seed=0)
I_e = my_nest.GetDefaults(neuron_model[0])['I_e'] + stn_current
STN = MyGroup(neuron_model[0],
n=1,
sd=True,
params={'I_e': I_e},
mm_dt=.1,
mm=True)
if n_ctx > 0:
my_nest.Connect(CTX[:], STN[:] * len(CTX[:]), model=syn_models[0])
if n_gpe > 0:
my_nest.Connect(GPE[:], STN[:] * len(GPE[:]), model=syn_models[1])
my_nest.MySimulate(sim_time)
STN.get_signal('s', start=0, stop=sim_time)
STN.get_signal('v', recordable='V_m', start=0, stop=sim_time)
return STN
def simulate_voltage_ipsp(I_vec):
simTime = 700. # ms
spikes_at = numpy.arange(500., len(I_vec) * simTime, simTime) # ms
voltage = [] # mV
ipsp_weak = [] # mV
ipsp_strong = [] # mV
my_nest.ResetKernel()
model_list = models()
my_nest.MyLoadModels(model_list, NEURON_MODELS)
my_nest.MyLoadModels(model_list, SYNAPES_MODELS)
SNR = MyGroup(NEURON_MODELS[0], len(SYNAPES_MODELS), mm=True, mm_dt=0.1)
SG = my_nest.Create('spike_generator', params={'spike_times': spikes_at})
for i in range(len(SYNAPES_MODELS)):
my_nest.Connect(SG, [SNR[i]], model=SYNAPES_MODELS[i])
simTimeTot = 0
for I_e in I_vec:
my_nest.SetStatus(SNR[:], params={'I_e': float(I_e)})
my_nest.MySimulate(simTime)
simTimeTot += simTime
SNR.get_signal('v', 'V_m', stop=simTimeTot) # retrieve signal
simTimeAcum = 0
for I_e in I_vec:
signal = SNR.signals['V_m'].my_time_slice(400 + simTimeAcum,
700 + simTimeAcum)
simTimeAcum += simTime
clamped_at = signal[1].signal[-1]
minV = min(signal[1].signal)
maxV = max(signal[1].signal)
if abs(minV - clamped_at) < abs(maxV - clamped_at):
size_weak = max(signal[1].signal) - clamped_at
size_strong = max(signal[2].signal) - clamped_at
else:
size_weak = min(signal[1].signal) - clamped_at
size_strong = min(signal[2].signal) - clamped_at
voltage.append(clamped_at)
ipsp_weak.append(size_weak)
ipsp_strong.append(size_strong)
ipsp = numpy.array([ipsp_weak, ipsp_strong])
return voltage, ipsp
def simulate_output_example(Input, Output, simTime, synapses):
for synapse, target in zip(synapses, Output):
my_nest.CC(Input[:], [target], model=synapse)
Output.gaussian_model_par(sead=1) # model param gaussian distributed
Output.gaussian_conn_par(sead=1) # connection param gaussian distributed
my_nest.MySimulate(simTime)
return Output
def simulate_example_inh_current(I_vec):
simTime = 1000. # ms
my_nest.ResetKernel()
model_list, model_dict = models()
my_nest.MyLoadModels(model_list, NEURON_MODELS)
df = my_nest.GetDefaults(NEURON_MODELS[0])
n = len(I_vec)
STN = MyGroup(NEURON_MODELS[0],
n,
sd=True,
mm=True,
mm_dt=1.0,
record_from=['V_m', 'u'])
I_e0 = my_nest.GetStatus(STN[:])[0]['I_e']
my_nest.SetStatus(STN[:], params={'I_e': I_e0 + I_E + 50}) # Set I_e
I_e = my_nest.GetStatus(STN.ids, 'I_e')[0]
scg = my_nest.Create('step_current_generator', n=n)
rec = my_nest.GetStatus(STN[:])[0]['receptor_types']
for source, target, I in zip(scg, STN[:], I_vec):
my_nest.SetStatus([source], {
'amplitude_times': [280., 700.],
'amplitude_values': [float(I), 0.]
})
my_nest.Connect([source], [target],
params={'receptor_type': rec['CURR']})
my_nest.MySimulate(simTime)
STN.get_signal('v', 'V_m', stop=simTime) # retrieve signal
STN.get_signal('s') # retrieve signal
STN.signals['V_m'].my_set_spike_peak(21, spkSignal=STN.signals['spikes'])
e = my_nest.GetStatus(STN.mm)[0]['events'] # get events
#pylab.plot(e['u'])
#pylab.show()
meanRate = round(STN.signals['spikes'].mean_rate(0, 500), 1)
s = '\n'
s = s + 'Example inhibitory current:\n'
s = s + ' %s %5s %3s %s %5s %3s \n' % ('Mean rate:', meanRate, 'Hz', 'I_e',
I_e, 'pA')
s = s + 'Steps:\n'
s = s + ' %5s %3s \n' % (I_vec, 'pA')
infoString = s
return STN, infoString
def simulate_ahp(I_vec):
simTime = 3000. # ms
my_nest.ResetKernel()
model_list, model_dict = models()
my_nest.MyLoadModels(model_list, NEURON_MODELS)
n = len(I_vec)
STN = MyGroup(NEURON_MODELS[0], n, sd=True, mm=True, mm_dt=1.0)
I_e0 = my_nest.GetStatus(STN[:])[0]['I_e']
#my_nest.SetStatus(STN[:], params={'I_e':-10.}) # Set I_e
my_nest.SetStatus(STN[:], params={'I_e': 1.0}) # Set I_e
I_e = my_nest.GetStatus(STN.ids, 'I_e')[0]
scg = my_nest.Create('step_current_generator', n=n)
rec = my_nest.GetStatus(STN[:])[0]['receptor_types']
for source, target, I in zip(scg, STN[:], I_vec):
my_nest.SetStatus([source], {
'amplitude_times': [500., 1000.],
'amplitude_values': [float(I), 0.]
})
my_nest.Connect([source], [target],
params={'receptor_type': rec['CURR']})
my_nest.MySimulate(simTime)
STN.get_signal('s') # retrieve signal
STN.signals['spikes'] = STN.signals['spikes'].time_slice(700, 2000)
delays = []
for i, curr in enumerate(I_vec):
delays.append(
max(
numpy.diff(
STN.signals['spikes'].spiketrains[i + 1.0].spike_times)))
meanRate = round(STN.signals['spikes'].mean_rate(0, 500), 1)
s = '\n'
s = s + 'Example inhibitory current:\n'
s = s + ' %s %5s %3s %s %5s %3s \n' % ('Mean rate:', meanRate, 'Hz', 'I_e',
I_e, 'pA')
s = s + 'Steps:\n'
s = s + ' %5s %3s \n' % (I_vec, 'pA')
infoString = s
return I_vec, delays
def simulate_output_mean_rate(Input, Output, nOutputPerSynapse, simTime,
synapses):
nSynapses = len(synapses)
for i in range(nSynapses):
# connect input and output
my_nest.CC(Input,
Output[i * nOutputPerSynapse:(i + 1) * nOutputPerSynapse],
model=synapses[i])
Output.gaussian_model_par(sead=1) # model param gaussian distributed
Output.gaussian_conn_par(sead=1) # connection param gaussian distributed
my_nest.MySimulate(simTime)
return Output
def simulate_basa_line_SNr_multiple(msn_rate,
gpe_rate,
stn_rate,
n_msn,
n_gpe,
n_stn,
neuron_model,
syn_models,
snr_current,
sim_time=1000,
threads=8,
w_STN_SNR=0,
seed=0,
record_vm=True,
n_neurons=1):
Params_in = {}
if w_STN_SNR: Params_in['STN_SNR_ampa_s'] = w_STN_SNR
model_list, model_dict = models(Params_in)
my_nest.ResetKernel(threads=threads)
my_nest.MyLoadModels(model_dict, neuron_model)
my_nest.MyLoadModels(model_dict, syn_models)
SNR_list = []
for i in range(int(n_neurons)):
seed = seed + i
SNR_list.append(
simulate_basa_line_SNr(msn_rate, gpe_rate, stn_rate, n_msn, n_gpe,
n_stn, neuron_model, syn_models,
snr_current, sim_time, threads, w_STN_SNR,
seed, record_vm, True))
my_nest.MySimulate(sim_time)
for i in range(int(n_neurons)):
SNR_list[i].get_signal('s', start=0, stop=sim_time)
if record_vm:
SNR_list[i].get_signal('v',
recordable='V_m',
start=0,
stop=sim_time)
return SNR_list
def simulate_response_example_clamped_silent(I_e):
'''
Response when SNR is clamped to a voltage for Ref 2 and Ref 1 synapse
'''
spike_at = 500. # ms
simTime = 700. # ms
my_nest.ResetKernel()
model_list, model_dict = models()
my_nest.MyLoadModels(model_list, NEURON_MODELS)
my_nest.MyLoadModels(model_list, SYNAPSE_MODELS)
SNR = MyGroup(NEURON_MODELS[0],
len(SYNAPSE_MODELS),
mm=True,
mm_dt=0.1,
params={'I_e': I_e})
SG = my_nest.Create('spike_generator', params={'spike_times': [spike_at]})
for i in range(len(SYNAPSE_MODELS)):
my_nest.Connect(SG, [SNR[i]], model=SYNAPSE_MODELS[i])
my_nest.MySimulate(simTime)
SNR.get_signal('v', 'V_m', stop=simTime) # retrieve signal
SNR.signals['V_m'] = SNR.signals['V_m'].my_time_slice(400, 700)
clamped_at = SNR.signals['V_m'][1].signal[-1]
size_MSN_weak = min(SNR.signals['V_m'][1].signal) - clamped_at
size_MSN_strong = min(SNR.signals['V_m'][2].signal) - clamped_at
size_GPE_ref = min(SNR.signals['V_m'][3].signal) - clamped_at
s = ''
s = s + ' %s %5s %3s \n' % ('Clamped at:', str(round(clamped_at, 1)), 'mV')
s = s + ' %s %5s %3s \n' % (r'$\delta_w^{MSN}$',
str(round(size_MSN_weak, 1)), 'mV')
s = s + ' %s %5s %3s \n' % (r'$\delta_s^{MSN}$',
str(round(size_MSN_strong, 1)), 'mV')
s = s + ' %s %5s %3s \n' % (r'$\delta_s^{MSN}$', str(round(
size_GPE_ref, 1)), 'mV')
infoString = s
return SNR, infoString
def simulate_example(I_e):
simTime = 3000. # ms
my_nest.ResetKernel()
model_list, model_dict = models()
my_nest.MyLoadModels(model_list, NEURON_MODELS)
I_e0 = my_nest.GetDefaults(NEURON_MODELS[0])['I_e']
STN = MyGroup(NEURON_MODELS[0],
1,
sd=True,
mm=True,
mm_dt=1.,
params={'I_e': I_e + I_e0})
'''
scg = my_nest.Create( 'step_current_generator',n=1 )
rec=my_nest.GetStatus(STN[:])[0]['receptor_types']
my_nest.SetStatus(scg, {'amplitude_times':[280.,1700.],
'amplitude_values':[100.0,0.]})
my_nest.Connect( scg, STN.ids,
params = { 'receptor_type' : rec['CURR'] } )
'''
my_nest.MySimulate(simTime)
STN.get_signal('v', 'V_m', stop=simTime) # retrieve signal
STN.get_signal('s') # retrieve signal
meanRate = round(STN.signals['spikes'].mean_rate(0, 1000), 1)
print STN.signals['spikes'].isi()
STN.signals['V_m'].my_set_spike_peak(21, spkSignal=STN.signals['spikes'])
s = '\n'
s = s + 'Example:\n'
s = s + ' %s %5s %3s %s %5s %3s \n' % ('Mean rate:', meanRate, 'Hz', 'I_e',
I_e, 'pA')
infoString = s
return STN, infoString
def simulate_example_rebound_spike(I_vec):
simTime = 5000. # ms
my_nest.ResetKernel()
model_list, model_dict=models()
my_nest.MyLoadModels( model_list, NEURON_MODELS )
n=len(I_vec)
GPE = MyGroup( NEURON_MODELS[0], n, sd=True, mm=True, mm_dt = 1.0 )
I_e0=my_nest.GetStatus(GPE[:])[0]['I_e']
#my_nest.SetStatus(GPE[:], params={'I_e':-10.}) # Set I_e
my_nest.SetStatus(GPE[:], params={'I_e':-10.}) # Set I_e
I_e = my_nest.GetStatus(GPE.ids,'I_e')[0]
scg = my_nest.Create( 'step_current_generator',n=n )
rec=my_nest.GetStatus(GPE[:])[0]['receptor_types']
for source, target, I in zip(scg, GPE[:], I_vec):
my_nest.SetStatus([source], {'amplitude_times':[500.,700.],
'amplitude_values':[float(I),0.]})
my_nest.Connect( [source], [target],
params = { 'receptor_type' : rec['CURR'] } )
my_nest.MySimulate(simTime)
GPE.get_signal( 'v','V_m', stop=simTime ) # retrieve signal
GPE.get_signal( 's') # retrieve signal
GPE.signals['V_m'].my_set_spike_peak( 21, spkSignal= GPE.signals['spikes'] )
meanRate=round(GPE.signals['spikes'].mean_rate(0,500),1)
s='\n'
s =s + 'Example inhibitory current:\n'
s = s + ' %s %5s %3s %s %5s %3s \n' % ( 'Mean rate:', meanRate, 'Hz',
'I_e', I_e,'pA' )
s = s + 'Steps:\n'
s = s + ' %5s %3s \n' % ( I_vec, 'pA' )
infoString=s
return GPE, infoString
def simulate_basa_line_SNr(msn_rate,
gpe_rate,
stn_rate,
n_msn,
n_gpe,
n_stn,
neuron_model,
snr_current,
sim_time=1000,
threads=8,
stn_syn='STN_SNR_ampa_s'):
SNR_INJECTED_CURRENT = snr_current
SYNAPSE_MODEL_BACKROUND_STN = [stn_syn]
model_list, model_dict = models()
my_nest.ResetKernel(threads=threads)
my_nest.MyLoadModels(model_dict, neuron_model)
my_nest.MyLoadModels(model_dict, SYNAPSE_MODEL_BACKROUND_MSN)
my_nest.MyLoadModels(model_dict, SYNAPSE_MODEL_BACKROUND_GPE)
my_nest.MyLoadModels(model_dict, SYNAPSE_MODEL_BACKROUND_STN)
SNR_list = [] # List with SNR groups for synapse.
if n_msn > 0: MSN_base = MyPoissonInput(n=n_msn, sd=True)
if n_gpe > 0: GPE = MyPoissonInput(n=n_gpe, sd=False)
if n_stn > 0: STN = MyPoissonInput(n=n_stn, sd=False)
if n_msn > 0:
MSN_base.set_spike_times(rates=[msn_rate],
times=[1],
t_stop=sim_time,
seed=0)
if n_gpe > 0:
GPE.set_spike_times(rates=[gpe_rate],
times=[1],
t_stop=sim_time,
seed=0)
if n_stn > 0:
STN.set_spike_times(rates=[stn_rate],
times=[1],
t_stop=sim_time,
seed=0)
I_e = my_nest.GetDefaults(neuron_model[0])['I_e'] + SNR_INJECTED_CURRENT
SNR = MyGroup(neuron_model[0],
n=1,
sd=True,
params={'I_e': I_e},
mm_dt=.1,
mm=True)
if n_msn > 0:
my_nest.Connect(MSN_base[:],
SNR[:] * len(MSN_base[:]),
model=SYNAPSE_MODEL_BACKROUND_MSN[0])
if n_gpe > 0:
my_nest.Connect(GPE[:],
SNR[:] * len(GPE[:]),
model=SYNAPSE_MODEL_BACKROUND_GPE[0])
if n_stn > 0:
my_nest.Connect(STN[:],
SNR[:] * len(STN[:]),
model=SYNAPSE_MODEL_BACKROUND_STN[0])
my_nest.MySimulate(sim_time)
SNR.get_signal('s', start=0, stop=sim_time)
meanRate = round(SNR.signals['spikes'].mean_rate(1000, sim_time), 1)
spk = SNR.signals['spikes'].time_slice(1000, sim_time).raw_data()
CV = numpy.std(numpy.diff(spk[:, 0], axis=0)) / numpy.mean(
numpy.diff(spk[:, 0], axis=0))
SNR.get_signal('v', recordable='V_m', start=0, stop=sim_time)
SNR.signals['V_m'].my_set_spike_peak(15, spkSignal=SNR.signals['spikes'])
pylab.rcParams.update({'path.simplify': False})
SNR.signals['V_m'].plot()
pylab.title(str(meanRate) + 'Hz, CV=' + str(CV))
pylab.show()
return
def simulate_basa_line_GPe(msn_rate,
stn_rate,
gpe_rate,
n_msn,
n_stn,
n_gpe,
neuron_model,
syn_models,
gpe_current,
sim_time=1000,
threads=8):
model_list, model_dict = models()
my_nest.ResetKernel(threads=threads)
my_nest.MyLoadModels(model_dict, neuron_model)
my_nest.MyLoadModels(model_dict, syn_models)
SNR_list = [] # List with SNR groups for synapse.
if n_msn > 0: MSN = MyPoissonInput(n=n_msn, sd=False)
if n_stn > 0: STN = MyPoissonInput(n=n_stn, sd=False)
if n_gpe > 0: GPE = MyPoissonInput(n=n_gpe, sd=False)
if n_msn > 0:
MSN.set_spike_times(rates=[msn_rate],
times=[1],
t_stop=sim_time,
seed=0)
if n_stn > 0:
STN.set_spike_times(rates=[stn_rate],
times=[1],
t_stop=sim_time,
seed=0)
if n_gpe > 0:
GPE.set_spike_times(rates=[gpe_rate],
times=[1],
t_stop=sim_time,
seed=0)
I_e = my_nest.GetDefaults(neuron_model[0])['I_e'] + gpe_current
GPE_target = MyGroup(neuron_model[0],
n=1,
sd=True,
params={'I_e': I_e},
mm_dt=.1,
mm=True)
if n_msn > 0:
my_nest.Connect(MSN[:],
GPE_target[:] * len(MSN[:]),
model=syn_models[0])
if n_stn > 0:
my_nest.Connect(STN[:],
GPE_target[:] * len(STN[:]),
model=syn_models[1])
if n_gpe > 0:
my_nest.Connect(GPE[:],
GPE_target[:] * len(GPE[:]),
model=syn_models[2])
my_nest.MySimulate(sim_time)
GPE_target.get_signal('s', start=0, stop=sim_time)
meanRate = round(GPE_target.signals['spikes'].mean_rate(1000, sim_time), 1)
spk = GPE_target.signals['spikes'].time_slice(1000, sim_time).raw_data()
CV = numpy.std(numpy.diff(spk[:, 0], axis=0)) / numpy.mean(
numpy.diff(spk[:, 0], axis=0))
GPE_target.get_signal('v', recordable='V_m', start=0, stop=sim_time)
GPE_target.signals['V_m'].my_set_spike_peak(
15, spkSignal=GPE_target.signals['spikes'])
pylab.rcParams.update({'path.simplify': False})
GPE_target.signals['V_m'].plot()
pylab.title(str(meanRate) + 'Hz, CV=' + str(CV))
pylab.show()
return
def simulate_network(params_msn_d1,
params_msn_d2,
params_stn,
synapse_models,
sim_time,
seed,
I_e_add,
threads=1,
start_rec=0,
model_params={}):
'''
params_msn_d1 - dictionary with timing and burst freq setup for msn
{'base_rates':[0.1, 0.1, ..., 0.1], #Size number of actions
'mod_rates': [[20,0,...,0],
[0,20,...,0],...[0,0,...,20]] #size number of actions times number of events
'mod_times':[[500,1000],[1500,2000],[9500,10000]] # size number of events
'n_neurons':500}
params_msn_d2 - dictionary with timing and burst freq setup for gpe
params_stn - dictionary {'rate':50}
same as params_msn
neuron_model - string, the neuron model to use
synapse_models - dict, {'MSN':'...', 'GPE':,'...', 'STN':'...'}
sim_time - simulation time
seed - seed for random generator
I_e_add - diabled
start_rec - start recording from
model_params - general model paramters
'''
I_e_add = {'SNR': 300, 'STN': 0, 'GPE': 30}
f = 0.01 #0.01#0.5
I_e_variation = {'GPE': 25 * f, 'SNR': 100 * f, 'STN': 10 * f}
my_nest.ResetKernel(threads=8)
numpy.random.seed(seed)
params = {
'conns': {
'MSN_D1_SNR': {
'syn': synapse_models[0]
},
'GPE_SNR': {
'syn': synapse_models[1]
}
}
}
params = misc.dict_merge(model_params, params)
model_list, model_dict = models()
group_list, group_dict, connect_list, connect_params = network(
model_dict, params)
print connect_params
groups = {}
for name, model, setup in group_list:
# Update input current
my_nest.MyLoadModels(model_dict, [model])
if name in I_e_add.keys():
I_e = my_nest.GetDefaults(model)['I_e'] + I_e_add[name]
my_nest.SetDefaults(model, {'I_e': I_e})
groups[name] = []
for action in range(connect_params['misc']['n_actions']):
if model in ['MSN_D1_spk_gen', 'MSN_D2_spk_gen']:
group = MyPoissonInput(params=setup,
sd=True,
sd_params={
'start': start_rec,
'stop': sim_time
})
else:
group = MyGroup(params=setup,
sd=True,
mm=False,
mm_dt=0.1,
sd_params={
'start': start_rec,
'stop': sim_time
})
groups[name].append(group)
for action in range(connect_params['misc']['n_actions']):
groups['MSN_D1'][action].set_spike_times(
list(params_msn_d1['mod_rates'][action]),
list(params_msn_d1['mod_times']),
sim_time,
ids=groups['MSN_D1'][action].ids)
groups['MSN_D2'][action].set_spike_times(
params_msn_d2['mod_rates'][action],
params_msn_d2['mod_times'],
sim_time,
ids=groups['MSN_D2'][action].ids)
# Create neurons and synapses
for source, target, props in connect_list:
my_nest.MyLoadModels(model_dict, [props['model']])
for action in range(connect_params['misc']['n_actions']):
pre = list(groups[source][action].ids)
post = list(groups[target][action].ids)
my_nest.MyRandomConvergentConnect(pre, post, params=props)
STN_CTX_input_base = my_nest.Create('poisson_generator',
params={
'rate': params_stn['rate'],
'start': 0.,
'stop': sim_time
})
my_nest.MyLoadModels(model_dict, ['CTX_STN_ampa_s'])
for action in range(connect_params['misc']['n_actions']):
my_nest.DivergentConnect(STN_CTX_input_base,
groups['STN'][action].ids,
model='CTX_STN_ampa_s')
my_nest.MySimulate(sim_time)
for action in range(connect_params['misc']['n_actions']):
groups['MSN_D1'][action].get_signal('s',
start=start_rec,
stop=sim_time)
groups['MSN_D2'][action].get_signal('s',
start=start_rec,
stop=sim_time)
groups['GPE'][action].get_signal('s', start=start_rec, stop=sim_time)
groups['SNR'][action].get_signal('s', start=start_rec, stop=sim_time)
groups['STN'][action].get_signal('s', start=start_rec, stop=sim_time)
return groups
def simulate_example(load=True):
global SNR_INJECTED_CURRENT
global NEURON_MODELS
global N_GPE
global N_MSN_BURST
global N_MSN
global GPE_BASE_RATE
global FILE_NAME
global OUTPUT_PATH
global SYNAPSE_MODELS_TESTED
global SEL_ONSET
#n_exp =200 # number of experiments
n_exp = 20 # number of experiments
# Path were raw data is saved. For example the spike trains.
save_result_at = OUTPUT_PATH + '/' + FILE_NAME + '-simulate_example.pkl'
save_header_at = OUTPUT_PATH + '/' + FILE_NAME + '-simulate_example_header'
burst_time = 500.
sim_time = burst_time + SEL_ONSET + 1000.
MODEL_LIST = models()
my_nest.ResetKernel()
my_nest.MyLoadModels(MODEL_LIST, NEURON_MODELS)
my_nest.MyLoadModels(MODEL_LIST, SYNAPSE_MODELS_TESTED)
my_nest.MyLoadModels(MODEL_LIST, SYNAPSE_MODELS_BACKGROUND)
SNR_list = [] # List with SNR groups for synapse.
if not load:
MSN_base = MyPoissonInput(n=N_MSN_BASE * n_exp, sd=True)
MSN_burst = MyPoissonInput(n=N_MSN_BURST * n_exp, sd=True)
GPE = MyPoissonInput(n=N_GPE * n_exp, sd=True)
# Set spike times MSN and GPe
# Non bursting MSNs
for id in MSN_base[:]:
seed = numpy.random.random_integers(0, 1000000.0)
MSN_base.set_spike_times(id=id,
rates=[MSN_BASE_RATE],
times=[1],
t_stop=sim_time,
seed=seed)
# Background GPe
for id in GPE[:]:
seed = numpy.random.random_integers(0, 1000000.0)
GPE.set_spike_times(id=id,
rates=[GPE_BASE_RATE],
times=[1],
t_stop=sim_time,
seed=seed)
# Bursting MSNs
for id in MSN_burst[:]:
rates = [MSN_BASE_RATE, MSN_BURST_RATE, MSN_BASE_RATE]
times = [1, SEL_ONSET, burst_time + SEL_ONSET]
t_stop = sim_time
seed = numpy.random.random_integers(0, 1000000.0)
MSN_burst.set_spike_times(id=id,
rates=rates,
times=times,
t_stop=t_stop,
seed=seed)
for i_syn in range(len(SYNAPSE_MODELS_TESTED)):
params = []
I_e = my_nest.GetDefaults(
NEURON_MODELS[0])['I_e'] + SNR_INJECTED_CURRENT
for i in range(n_exp):
#params.append({'I_e':numpy.random.normal(I_e,
# 0.1*I_e)})
params.append({'I_e': I_e})
#{'I_e':SNR_INJECTED_CURRENT}
SNR = MyGroup(NEURON_MODELS[0],
n=n_exp,
sd=True,
params=params,
mm_dt=.1,
record_from=[''])
SNR_list.append(SNR)
# Connect, experiment specific
sources_MSN_SNR_base = numpy.arange(0, n_exp * N_MSN_BASE)
sources_MSN_SNR_burst = numpy.arange(0, n_exp * N_MSN_BURST)
targets_MSN_SNR_base = numpy.mgrid[0:n_exp, 0:N_MSN_BASE][0].reshape(
1, N_MSN_BASE * n_exp)[0]
targets_MSN_SNR_burst = numpy.mgrid[0:n_exp, 0:N_MSN_BURST][0].reshape(
1, N_MSN_BURST * n_exp)[0]
sources_GPE_SNR = numpy.arange(0, n_exp * N_GPE)
targets_GPE_SNR = numpy.mgrid[0:n_exp,
0:N_GPE][0].reshape(1, N_GPE * n_exp)[0]
for i_syn, syn in enumerate(SYNAPSE_MODELS_TESTED):
syn = SYNAPSE_MODELS_TESTED[i_syn]
SNR = SNR_list[i_syn]
my_nest.Connect(MSN_base[sources_MSN_SNR_base],
SNR[targets_MSN_SNR_base],
model=syn)
my_nest.Connect(MSN_burst[sources_MSN_SNR_burst],
SNR[targets_MSN_SNR_burst],
model=syn)
my_nest.Connect(GPE[sources_GPE_SNR],
SNR[targets_GPE_SNR],
model=SYNAPSE_MODELS_BACKGROUND[0])
my_nest.MySimulate(sim_time)
MSN_base.get_signal('s', start=0, stop=sim_time)
MSN_burst.get_signal('s', start=0, stop=sim_time)
for SNR in SNR_list:
SNR.get_signal('s', start=0, stop=sim_time)
# Get firing rates of MSNs
MSN_firing_rates = []
MSN_all = copy.deepcopy(MSN_base)
MSN_all.merge(MSN_burst)
time_bin = 20.
groups = [MSN_base, MSN_burst, MSN_all]
for group in groups:
timeAxis, firingRates = group.signals['spikes'].my_firing_rate(
bin=time_bin, display=False)
MSN_firing_rates.append([timeAxis, firingRates])
# Pick out spikes for burst, base and all to use in scatter plot
MSN_spikes_and_ids = []
g1 = MSN_burst.slice(MSN_burst[0:N_MSN_BURST])
g2 = MSN_base.slice(MSN_base[0:N_MSN_BASE])
ids_MSN_burst = range(450, 450 + N_MSN_BURST)
ids_MSN_base = [id for id in range(N_MSN) if id not in IDS_MSN_BURST]
# Rename ids for plotting purpose
g1_dict = dict([[id1, id2] for id1, id2 in zip(g1.ids, ids_MSN_burst)])
g2_dict = dict([[id1, id2] for id1, id2 in zip(g2.ids, ids_MSN_base)])
groups = [g1, g2]
dics = [g1_dict, g2_dict]
for group, dic in zip(groups, dics):
raw_data = group.signals['spikes'].raw_data()
for i in range(raw_data.shape[0]):
raw_data[i, 1] = dic[raw_data[i, 1]]
MSN_spikes_and_ids.append(raw_data)
#times, binned_data=MSN_base.signals['spikes'].binned_raw_data(0, sim_time, res=1, clip=0)
#filtered_binned_data=misc.time_resolved_rate(binned_data, 100, kernel_type='triangle', res=1)
pre_ref_1 = str(SNR_list[0].signals['spikes'].mean_rate(
SEL_ONSET - 500, SEL_ONSET))
pre_ref_2 = str(SNR_list[1].signals['spikes'].mean_rate(
SEL_ONSET - 500, SEL_ONSET))
pre_dyn = str(SNR_list[2].signals['spikes'].mean_rate(
SEL_ONSET - 500, SEL_ONSET))
s = '\n'
s = s + 'Simulate example:\n'
s = s + '%s %5s %3s \n' % ('N experiments:', str(n_exp), '#')
s = s + '%s %5s %3s \n' % ('Bin size MSN hz:', str(time_bin), 'ms')
s = s + '%s %5s %3s \n' % ('MSN base rate:', str(MSN_BASE_RATE), 'Hz')
s = s + '%s %5s %3s \n' % ('MSN burst rate:', str(MSN_BURST_RATE),
'Hz')
s = s + '%s %5s %3s \n' % ('GPe rate:', str(GPE_BASE_RATE), 'Hz')
s = s + '%s %5s %3s \n' % ('Burst time:', str(burst_time), 'ms')
s = s + '%s %5s %3s \n' % ('Pre sel rate Ref:', pre_ref_1[0:4], 'Hz')
s = s + '%s %5s %3s \n' % ('Pre sel rate Ref:', pre_ref_2[0:4], 'Hz')
s = s + '%s %5s %3s \n' % ('Pre sel rate Dyn:', pre_dyn[0:4], 'Hz')
header = HEADER_SIMULATION_SETUP + s
misc.pickle_save([MSN_firing_rates, MSN_spikes_and_ids, SNR_list, s],
save_result_at)
misc.text_save(header, save_header_at)
else:
MSN_firing_rates, MSN_spikes_and_ids, SNR_list, s = misc.pickle_load(
save_result_at)
return MSN_firing_rates, MSN_spikes_and_ids, SNR_list, s
def simulate_selection_vs_neurons(selection_intervals=[0.0, 500.0],
hz=20,
load=True):
global SNR_INJECTED_CURRENT
global NEURON_MODELS
global N_GPE
global N_MSN_BURST
global N_MSN
global GPE_BASE_RATE
global FILE_NAME
global OUTPUT_PATH
global SYNAPSE_MODELS_TESTED
global SEL_ONSET
#n_exp=100
n_exp = 2
if hz > 7:
n_max_sel = 60
if hz > 20:
n_max_sel = 30
else:
n_max_sel = 100
RATE_BASE = 0.1
RATE_SELE = hz
save_result_at = (OUTPUT_PATH + '/' + FILE_NAME +
'-simulate_selection_vs_neurons' + str(hz) + '-hz.pkl')
save_header_at = (OUTPUT_PATH + '/' + FILE_NAME +
'-simulate_selection_vs_neurons' + str(hz) +
'-hz_header')
burst_time = 500.
sim_time = burst_time + SEL_ONSET + 500.
EXPERIMENTS = range(n_exp)
MODEL_LIST = models()
my_nest.ResetKernel()
my_nest.MyLoadModels(MODEL_LIST, NEURON_MODELS)
my_nest.MyLoadModels(MODEL_LIST, SYNAPSE_MODELS_TESTED)
my_nest.MyLoadModels(MODEL_LIST, SYNAPSE_MODELS_BACKGROUND)
MSN_list = [] # MSN input for each experiment
for i_exp in EXPERIMENTS:
MSN = MyPoissonInput(n=N_MSN + n_max_sel, sd=True)
MSN_list.append(MSN)
GPE_list = [] # GPE input for each experiment
for i_exp in EXPERIMENTS:
GPE = MyPoissonInput(n=N_GPE, sd=True)
GPE_list.append(GPE)
SNR_list = [] # SNR groups for each synapse and number of selected MSN
SNR_list_experiments = []
for i_syn, syn in enumerate(SYNAPSE_MODELS_TESTED):
SNR = []
for i_sel in range(n_max_sel + 1): # Plus one to get no burst point
I_e = my_nest.GetDefaults(
NEURON_MODELS[0])['I_e'] + SNR_INJECTED_CURRENT
SNR.append(
MyGroup(NEURON_MODELS[0],
n=n_exp,
sd=True,
params={'I_e': I_e}))
SNR_list.append(SNR)
if not load:
for i_exp in EXPERIMENTS:
MSN = MSN_list[i_exp]
GPE = GPE_list[i_exp]
# Set spike times
# Base rate
for id in MSN[1:N_MSN]:
MSN.set_spike_times(id=id,
rates=[RATE_BASE],
times=[1],
t_stop=sim_time,
seed=int(numpy.random.random() * 10000.0))
# Selection
for id in MSN[N_MSN:N_MSN + n_max_sel]:
rates = [RATE_BASE, RATE_SELE, RATE_BASE]
times = [1, SEL_ONSET, burst_time + SEL_ONSET]
t_stop = sim_time
MSN.set_spike_times(id=id,
rates=rates,
times=times,
t_stop=t_stop,
seed=int(numpy.random.random() * 10000.0))
# Base rate GPE
for id in GPE[:]:
GPE.set_spike_times(id=id,
rates=[GPE_BASE_RATE],
times=[1],
t_stop=sim_time,
seed=int(numpy.random.random() * 10000.0))
# Connect
for i_syn, syn in enumerate(SYNAPSE_MODELS_TESTED):
# i_sel goes over 0,..., n_max_sel
for i_sel in range(0, n_max_sel + 1):
target = SNR_list[i_syn][i_sel][i_exp]
my_nest.ConvergentConnect(MSN[0:N_MSN - i_sel], [target],
model=syn)
my_nest.ConvergentConnect(MSN[N_MSN:N_MSN + i_sel],
[target],
model=syn)
my_nest.ConvergentConnect(
GPE[:], [target], model=SYNAPSE_MODELS_BACKGROUND[0])
my_nest.MySimulate(sim_time)
for SNR_sel in SNR_list:
for SNR in SNR_sel:
SNR.get_signal('s')
sel_interval_mean_rates = []
sel_interval_mean_rates_std = []
for i_interval, interval in enumerate(selection_intervals):
t1 = selection_intervals[i_interval][0]
t2 = selection_intervals[i_interval][1]
mean_rates = []
mean_rates_std = []
# Time until arrival of spikes in SNr
delay = my_nest.GetDefaults(SYNAPSE_MODELS_BACKGROUND[0])['delay']
for SNR_sel in SNR_list:
m_r = []
m_r_std = []
for SNR in SNR_sel:
m_r.append(SNR.signals['spikes'].mean_rate(
SEL_ONSET + t1 + delay, SEL_ONSET + t2 + delay))
m_r_std.append(SNR.signals['spikes'].mean_rate_std(
SEL_ONSET + t1 + delay, SEL_ONSET + t2 + delay))
mean_rates.append(m_r)
mean_rates_std.append(m_r_std)
mean_rates = numpy.array(mean_rates)
mean_rates_std = numpy.array(mean_rates_std)
sel_interval_mean_rates.append(mean_rates)
sel_interval_mean_rates_std.append(mean_rates_std)
nb_neurons = numpy.arange(0, n_max_sel + 1, 1)
s = '\n'
s = s + ' %s %5s %3s \n' % ('N MSNs:', str(N_MSN), '#')
s = s + ' %s %5s %3s \n' % ('N experiments:', str(n_exp), '#')
s = s + ' %s %5s %3s \n' % ('MSN base rate:', str(MSN_BASE_RATE), 'Hz')
s = s + ' %s %5s %3s \n' % ('MSN burst rate:', str(MSN_BURST_RATE),
'Hz')
s = s + ' %s %5s %3s \n' % ('GPe rate:', str(GPE_BASE_RATE), 'Hz')
s = s + ' %s %5s %3s \n' % ('Burst time:', str(burst_time), 'ms')
s = s + ' %s %5s %3s \n' % ('SNR_INJECTED_CURRENT:',
str(SNR_INJECTED_CURRENT), 'pA')
for i_interval, interval in enumerate(selection_intervals):
s = s + ' %s %5s %3s \n' % ('Sel interval ' + str(i_interval) +
':', str(selection_intervals), 'ms')
info_string = s
header = HEADER_SIMULATION_SETUP + s
misc.text_save(header, save_header_at)
misc.pickle_save([
nb_neurons, sel_interval_mean_rates, sel_interval_mean_rates_std,
info_string
], save_result_at)
elif load:
nb_neurons, sel_interval_mean_rates, sel_interval_mean_rates_std, info_string = misc.pickle_load(
save_result_at)
return nb_neurons, sel_interval_mean_rates, sel_interval_mean_rates_std, info_string
def simulate_network_test(params_msn_d1,
params_msn_d2,
params_stn,
synapse_models,
sim_time,
seed,
I_e_add,
threads=1,
start_rec=0,
model_params={},
params_in={},
dis_conn_GPE_STN=False):
'''
params_msn_d1 - dictionary with timing and burst freq setup for msn
{'base_rates':0.1,
'base_times':[1],
'mod_rates': 20,
'mod_times':[1,200],
'mod_units':list()
'n_tot':500,
n_mod=20}
params_msn_d2 - dictionary with timing and burst freq setup for gpe
params_stn - dictionary {'rate':50}
same as params_msn
neuron_model - string, the neuron model to use
synapse_models - dict, {'MSN':'...', 'GPE':,'...', 'STN':'...'}
sim_time - simulation time
seed - seed for random generator
I_e_add - diabled
start_rec - start recording from
model_params - general model paramters
'''
my_nest.ResetKernel(threads=8)
numpy.random.seed(seed)
params = {
'conns': {
'MSN_D1_SNR': {
'syn': synapse_models[0]
},
'GPE_SNR': {
'syn': synapse_models[1]
}
}
}
params = misc.dict_merge(model_params, params)
params = misc.dict_merge({'neurons': {'GPE': {'paused': 0}}}, params)
model_list, model_dict = models(params_in)
layer_list, connect_list = network(model_dict, params)
# Create neurons and synapses
layer_dic = {}
for name, model, props in layer_list:
# Update input current
my_nest.MyLoadModels(model_dict, [model[1]])
if name in I_IN_VIVO.keys():
I_e = my_nest.GetDefaults(model[1])['I_e'] + I_IN_VIVO[name]
my_nest.SetDefaults(model[1], {'I_e': I_e})
#! Create layer, retrieve neurons ids per elements and p
if model[0] == 'spike_generator':
layer = MyLayerPoissonInput(layer_props=props,
sd=True,
sd_params={
'start': start_rec,
'stop': sim_time
})
else:
layer = MyLayerGroup(layer_props=props,
sd=True,
mm=False,
mm_dt=0.1,
sd_params={
'start': start_rec,
'stop': sim_time
})
for iter, id in enumerate(layer[:]):
if name == 'GPE' and params_msn_d2[
'n_mod'] and iter < params['neurons']['GPE']['paused']:
scg = my_nest.Create('step_current_generator', n=1)
rec = my_nest.GetStatus([id])[0]['receptor_types']
my_nest.SetStatus(
scg, {
'amplitude_times': params_msn_d2['mod_times'],
'amplitude_values': [0., -300., 0.]
})
my_nest.Connect(scg, [id],
params={'receptor_type': rec['CURR']})
I_e = my_nest.GetDefaults(model[1])['I_e']
if I_E_VARIATION[name]:
I = numpy.random.normal(I_e, I_E_VARIATION[name])
else:
I = I_e
#I=I_e
my_nest.SetStatus([id], {'I_e': I})
layer_dic[name] = layer
mm = nest.Create('multimeter', 1)
recodables = ['V_m', 'I', 'g_AMPA', 'g_NMDA', 'g_GABAA_1', 'g_GABAA_2']
my_nest.SetStatus(mm, {'interval': 0.1, 'record_from': recodables})
my_nest.Connect(mm, [layer_dic['STN'].ids[0]])
# Connect populations
for conn in connect_list:
name = conn[0] + '_' + conn[1]
my_nest.MyLoadModels(model_dict, [conn[2]['synapse_model']])
if dis_conn_GPE_STN == 'GPE' and (name in ['GPE_SNR']):
r, syn = 32 * 30.0, 'GPE_SNR_gaba_s_ref'
if not syn in my_nest.Models():
my_nest.MyLoadModels(model_dict, [syn])
pg = my_nest.Create('poisson_generator', 1, {
'rate': r,
'start': 1.
})
my_nest.DivergentConnect(pg, layer_dic[conn[1]].ids, model=syn)
elif dis_conn_GPE_STN == 'STN' and (name in ['STN_SNR']):
r, syn = 30 * 10.0, 'STN_SNR_ampa_s'
if not syn in my_nest.Models():
my_nest.MyLoadModels(model_dict, [syn])
pg = my_nest.Create('poisson_generator', 1, {
'rate': r,
'start': 1.
})
my_nest.DivergentConnect(pg, layer_dic[conn[1]].ids, model=syn)
else:
name = name + '_' + conn[3]
tp.ConnectLayers(layer_dic[conn[0]].layer_id,
layer_dic[conn[1]].layer_id, conn[2])
layer_dic[conn[1]].add_connection(source=layer_dic[conn[0]],
type=conn[3],
props=conn[2])
# Sort MSN D2 such that the closest to center is first in ids list.
# Do this to we can get focused inhibition in GPe
if params_msn_d2['focus']:
MSN_D2_idx = layer_dic['MSN_D2'].sort_ids()
else:
MSN_D2_idx = range(len(numpy.array(layer_dic['MSN_D2'].ids)))
n_mod_msn_d1 = params_msn_d1['n_mod']
n_mod_msn_d2 = params_msn_d2['n_mod']
MSN_D1_ids = layer_dic['MSN_D1'].ids
MSN_D2_ids = layer_dic['MSN_D2'].ids
MSN_D1_mod, MSN_D2_mod = [], []
if params_msn_d1['n_mod']: MSN_D1_mod = MSN_D1_ids[0:n_mod_msn_d1]
if params_msn_d2['n_mod']:
MSN_D2_mod = MSN_D2_ids[0:n_mod_msn_d2 *
params_msn_d2['skip']:params_msn_d2['skip']]
MSN_D1_base = list(set(MSN_D1_ids).difference(MSN_D1_mod))
MSN_D2_base = list(set(MSN_D2_ids).difference(MSN_D2_mod))
#layer_dic['MSN_D1'].ids[0:n_base_msn_d1]
#MSN_D2_ids=numpy.array(layer_dic['MSN_D2'].ids)
#MSN_D2_base=MSN_D2_ids#[MSN_D2_idx[0:n_base_msn_d1]]
#set().difference(t)
layer_dic['MSN_D1'].set_spike_times(params_msn_d1['base_rates'],
params_msn_d1['base_times'],
sim_time,
ids=MSN_D1_base)
layer_dic['MSN_D2'].set_spike_times(params_msn_d2['base_rates'],
params_msn_d2['base_times'],
sim_time,
ids=MSN_D2_base)
if params_msn_d1['n_mod']:
layer_dic['MSN_D1'].set_spike_times(params_msn_d1['mod_rates'],
params_msn_d1['mod_times'],
sim_time,
ids=MSN_D1_mod)
if params_msn_d2['n_mod']:
layer_dic['MSN_D2'].set_spike_times(params_msn_d2['mod_rates'],
params_msn_d2['mod_times'],
sim_time,
ids=MSN_D2_mod)
STN_CTX_input_base = my_nest.Create('poisson_generator',
params={
'rate': BASE_RATE_CTX_STN,
'start': 0.,
'stop': sim_time
})
my_nest.MyLoadModels(model_dict, ['CTX_STN_ampa_s'])
my_nest.DivergentConnect(STN_CTX_input_base,
layer_dic['STN'].ids,
model='CTX_STN_ampa_s')
if params_stn['mod']:
STN_CTX_input_mod = my_nest.Create('poisson_generator',
params={
'rate': params_stn['mod_rate'],
'start':
params_stn['mod_times'][0],
'stop':
params_stn['mod_times'][1]
})
my_nest.DivergentConnect(STN_CTX_input_mod,
layer_dic['STN'].ids,
model='CTX_STN_ampa_s')
#tar=[]
#for id in layer_dic['MSN_D1'].ids:
# tar.extend(sorted(nest.GetStatus(my_nest.FindConnections([id]),'target'))[:-1])
#pylab.subplot(211).hist(tar, 1500)
#
# tar=[]
# for id in layer_dic['MSN_D2'].ids:
# tar.extend(sorted(nest.GetStatus(my_nest.FindConnections([id]),'target'))[1:])
#
# pylab.subplot(212).hist(tar, 1500)
#pylab.show()
#
#
my_nest.MySimulate(sim_time)
if params_msn_d1['n_mod']: layer_dic['MSN_D1'].id_mod = MSN_D1_mod
if params_msn_d2['n_mod']: layer_dic['MSN_D2'].id_mod = MSN_D2_mod
#layer_dic['MSN_D1'].get_signal( 's', start=start_rec, stop=sim_time )
#layer_dic['MSN_D2'].get_signal( 's', start=start_rec, stop=sim_time )
#layer_dic['GPE'].get_signal( 's', start=start_rec, stop=sim_time )
#layer_dic['SNR'].get_signal( 's', start=start_rec, stop=sim_time )
#layer_dic['STN'].get_signal( 's', start=start_rec, stop=sim_time )
st_mm = my_nest.GetStatus(mm)[0]
pylab.plot(st_mm['events']['g_AMPA'])
pylab.plot(st_mm['events']['g_GABAA_1'])
pylab.plot(st_mm['events']['g_NMDA'])
pylab.plot(st_mm['events']['g_GABAA_2'])
m_ampa = numpy.mean(st_mm['events']['g_AMPA'])
m_gaba = numpy.mean(st_mm['events']['g_GABAA_1'])
pylab.title("{0} m_ampa:{1:2.1f} m_gaba:{2:2.1f}".format(
my_nest.version(), m_ampa, m_gaba))
pylab.show()
return layer_dic
def simulate_network_poisson(params_msn_d1,
params_msn_d2,
params_stn,
synapse_models,
sim_time,
seed,
I_e_add,
threads=1,
start_rec=0,
model_params={},
params_in={},
p_weights=False,
p_conn=False,
p_I_e=False):
'''
Assume that the background MSN are static weak, then can use poisson process
for them,
params_msn_d1 - dictionary with timing and burst freq setup for msn
{'base_rates':0.1,
'base_times':[1],
'mod_rates': 20,
'mod_times':[1,200],
'mod_units':list()
'n_tot':500,
n_mod=20}
params_msn_d2 - dictionary with timing and burst freq setup for gpe
params_stn - dictionary {'rate':50}
same as params_msn
neuron_model - string, the neuron model to use
synapse_models - dict, {'MSN':'...', 'GPE':,'...', 'STN':'...'}
sim_time - simulation time
seed - seed for random generator
I_e_add - diabled
start_rec - start recording from
model_params - general model paramters
'''
params = {
'conns': {
'MSN_D1_SNR': {
'syn': synapse_models[0]
},
'GPE_SNR': {
'syn': synapse_models[1]
}
}
}
my_nest.ResetKernel(threads=8)
numpy.random.seed(seed)
params = misc.dict_merge(model_params, params)
params = misc.dict_merge({'neurons': {'GPE': {'paused': 0}}}, params)
model_list, model_dict = models({}, p_weights)
layer_list, connect_list = network(model_dict, params, p_conn)
dic_p_I_e = {'SNR': 1., 'GPE': 1., 'STN': 1.}
if p_I_e is not False:
dic_p_I_e['SNR'] *= p_I_e[0]
dic_p_I_e['GPE'] *= p_I_e[1]
dic_p_I_e['STN'] *= p_I_e[2]
# Create neurons and synapses
layer_dic = {}
for name, model, props in layer_list:
# Update input current
my_nest.MyLoadModels(model_dict, [model[1]])
if name in I_IN_VIVO.keys():
I_in_vitro = my_nest.GetDefaults(model[1])['I_e']
I_e = I_in_vitro + I_IN_VIVO[name]
my_nest.SetDefaults(model[1], {'I_e': I_e * dic_p_I_e[name]})
#! Create layer, retrieve neurons ids per elements and p
if model[0] == 'spike_generator':
layer = MyLayerPoissonInput(layer_props=props,
sd=True,
sd_params={
'start': start_rec,
'stop': sim_time
})
elif model[0] == 'poisson_generator':
layer = MyPoissonInput(model[0],
props['columns'],
sd=True,
sd_params={
'start': start_rec,
'stop': sim_time
})
else:
layer = MyLayerGroup(layer_props=props,
sd=True,
mm=False,
mm_dt=0.1,
sd_params={
'start': start_rec,
'stop': sim_time
})
for iter, id in enumerate(layer[:]):
if name == 'GPE' and params_msn_d2[
'n_mod'] and iter < params['neurons']['GPE']['paused']:
scg = my_nest.Create('step_current_generator', n=1)
rec = my_nest.GetStatus([id])[0]['receptor_types']
my_nest.SetStatus(
scg, {
'amplitude_times': params_msn_d2['mod_times'],
'amplitude_values': [0., -300., 0.]
})
my_nest.Connect(scg, [id],
params={'receptor_type': rec['CURR']})
I_e = my_nest.GetDefaults(model[1])['I_e']
if I_E_VARIATION[name]:
I = numpy.random.normal(
I_e, I_E_VARIATION[name]) #I_E_VARIATION[name])
else:
I = I_e
my_nest.SetStatus([id], {'I_e': I})
layer_dic[name] = layer
# Connect populations
for conn in connect_list:
print[conn[2]['synapse_model']]
if not conn[2]['synapse_model'] in nest.Models():
my_nest.MyLoadModels(model_dict, [conn[2]['synapse_model']])
if layer_dic[conn[0]].model == 'poisson_generator':
my_nest.Connect(layer_dic[conn[0]].ids,
layer_dic[conn[1]].ids,
model=conn[2]['synapse_model'])
else:
name = conn[0] + '_' + conn[1] + '_' + conn[3]
tp.ConnectLayers(layer_dic[conn[0]].layer_id,
layer_dic[conn[1]].layer_id, conn[2])
layer_dic[conn[1]].add_connection(source=layer_dic[conn[0]],
type=conn[3],
props=conn[2])
# Sort MSN D2 such that the closest to center is first in ids list.
# Do this to we can get focused inhibition in GPe
if params_msn_d2['focus']:
MSN_D2_idx = layer_dic['MSN_D2'].sort_ids()
else:
MSN_D2_idx = range(len(numpy.array(layer_dic['MSN_D2'].ids)))
n_mod_msn_d1 = params_msn_d1['n_mod']
n_mod_msn_d2 = params_msn_d2['n_mod']
MSN_D1_ids = layer_dic['MSN_D1'].ids
MSN_D2_ids = layer_dic['MSN_D2'].ids
MSN_D1_mod, MSN_D2_mod = [], []
if params_msn_d1['n_mod']: MSN_D1_mod = MSN_D1_ids[0:n_mod_msn_d1]
if params_msn_d2['n_mod']:
MSN_D2_mod = MSN_D2_ids[0:n_mod_msn_d2 *
params_msn_d2['skip']:params_msn_d2['skip']]
MSN_D1_base = list(set(MSN_D1_ids).difference(MSN_D1_mod))
MSN_D2_base = list(set(MSN_D2_ids).difference(MSN_D2_mod))
layer_dic['MSN_D1'].set_spike_times(params_msn_d1['base_rates'],
params_msn_d1['base_times'],
sim_time,
ids=MSN_D1_base)
layer_dic['MSN_D2'].set_spike_times(params_msn_d2['base_rates'],
params_msn_d2['base_times'],
sim_time,
ids=MSN_D2_base)
if params_msn_d1['n_mod']:
layer_dic['MSN_D1'].set_spike_times(params_msn_d1['mod_rates'],
params_msn_d1['mod_times'],
sim_time)
if params_msn_d2['n_mod']:
layer_dic['MSN_D2'].set_spike_times(params_msn_d2['mod_rates'],
params_msn_d2['mod_times'],
sim_time,
ids=MSN_D2_mod)
# If background poisson are use
if params_msn_d1['bg_rate']:
layer_dic['MSN_D1_bg'].set_spike_times(params_msn_d1['bg_rate'], [1.],
sim_time)
if params_msn_d2['bg_rate']:
layer_dic['MSN_D2_bg'].set_spike_times(params_msn_d2['bg_rate'], [1.],
sim_time)
STN_CTX_input_base = my_nest.Create('poisson_generator',
params={
'rate': BASE_RATE_CTX_STN,
'start': 0.,
'stop': sim_time
})
my_nest.MyLoadModels(model_dict, ['CTX_STN_ampa_s'])
if 'STN' in layer_dic.keys():
my_nest.DivergentConnect(STN_CTX_input_base,
layer_dic['STN'].ids,
model='CTX_STN_ampa_s')
if params_stn['mod'] and 'STN' in layer_dic.keys():
STN_CTX_input_mod = my_nest.Create('poisson_generator',
params={
'rate': params_stn['mod_rate'],
'start':
params_stn['mod_times'][0],
'stop':
params_stn['mod_times'][1]
})
my_nest.DivergentConnect(STN_CTX_input_mod,
layer_dic['STN'].ids,
model='CTX_STN_ampa_s')
my_nest.MySimulate(sim_time)
if params_msn_d1['n_mod']: layer_dic['MSN_D1'].id_mod = MSN_D1_mod
if params_msn_d2['n_mod']: layer_dic['MSN_D2'].id_mod = MSN_D2_mod
if 'MSN_D1' in layer_dic.keys():
layer_dic['MSN_D1'].get_signal('s', start=start_rec, stop=sim_time)
if 'MSN_D2' in layer_dic.keys():
layer_dic['MSN_D2'].get_signal('s', start=start_rec, stop=sim_time)
if 'GPE' in layer_dic.keys():
layer_dic['GPE'].get_signal('s', start=start_rec, stop=sim_time)
if 'SNR' in layer_dic.keys():
layer_dic['SNR'].get_signal('s', start=start_rec, stop=sim_time)
if 'STN' in layer_dic.keys():
layer_dic['STN'].get_signal('s', start=start_rec, stop=sim_time)
return layer_dic
def simulate_example_msn_snr():
nFun=0 # Function number
nSim=0 # Simulation number within function
rates=numpy.array([.1,.1])
times=numpy.array([0.,25000.])
nMSN =500
simTime=100000.
I_e=0.
my_nest.ResetKernel()
model_list=models()
my_nest.MyLoadModels( model_list, neuronModels )
my_nest.MyLoadModels( model_list, synapseModels )
MSN = MyGroup( 'spike_generator', nMSN, mm_dt=1.0, mm=False, sd=False,
spath=spath,
sname_nb=str(nFun)+str(nSim))
SNR = MyGroup( neuronModels[0], n=len(synapseModels), params={'I_e':I_e},
sd=True,
mm_dt = .1, mm=False, spath=spath,
sname_nb=str(nFun)+str(nSim) )
nSim+=1
spikeTimes=[]
for i in range(nMSN):
spikes=misc.inh_poisson_spikes( rates, times,
t_stop=simTime,
n_rep=1, seed=i )
my_nest.SetStatus([MSN[i]], params={ 'spike_times':spikes } )
for spk in spikes: spikeTimes.append((i,spk))
# add spike list for MSN to MSN spike list
MSN.signals['spikes'] = my_signals.MySpikeList(spikeTimes, MSN.ids)
MSN.save_signal( 's')
noise=my_nest.Create('noise_generator', params={'std':100.})
my_nest.Connect(noise,[SNR[0]],params={'receptor_type':5})
my_nest.Connect(noise,[SNR[1]],params={'receptor_type':5})
my_nest.Connect(noise,[SNR[2]],params={'receptor_type':5})
for i, syn in enumerate(synapseModels):
my_nest.ConvergentConnect(MSN[:],[SNR[i]], model=syn)
my_nest.MySimulate( simTime )
SNR.get_signal( 's' ) # retrieve signal
SNR_rates=[SNR.signals['spikes'].mean_rates(0,5000),
SNR.signals['spikes'].mean_rates(5000, 10000)]
for i in range(0, len(SNR_rates)):
for j in range(0, len(SNR_rates[0])):
SNR_rates[i][j]=int(SNR_rates[i][j])
s='\n'
s =s + 'Example plot MSN and SNr:\n'
s =s + 'Synapse models:\n'
for syn in synapseModels:
s = s + ' %s\n' % (syn )
s = s + ' %s %5s %3s \n' % ( 'N MSN:', str ( nMSN ), '#' )
s = s + ' %s %5s %3s \n' % ( 'MSN Rates:', str ( [str(round(r,1))
for r in rates]),'Hz' )
s = s + ' %s %5s %3s \n' % ( '\nSNR Rates 0-5000:\n',
str ( SNR_rates [0]) ,'Hz' )
s = s + ' %s %5s %3s \n' % ( '\nSNR Rates 10000-5000:\n',
str ( SNR_rates [1]) ,'Hz' )
s = s + ' %s %5s %3s \n' % ( '\nTimes:', str ( times), 'ms' )
s = s + ' %s %5s %3s \n' % ( 'I_e:', str ( I_e ), 'pA' )
infoString=s
return MSN, SNR, infoString
def simulate_basa_line_GPe(msn_rate,
stn_rate,
gpe_rate,
n_msn,
n_stn,
n_gpe,
neuron_model,
syn_models,
gpe_current,
sim_time=1000,
threads=8,
w_GPE_GPE=False,
w_STN_GPE=False):
Params_in = {}
if w_GPE_GPE: Params_in['GPE_GPE_gaba_s'] = w_GPE_GPE
if w_STN_GPE: Params_in['STN_GPE_ampa_s'] = w_STN_GPE
model_list, model_dict = models(Params_in)
my_nest.ResetKernel(threads=threads)
my_nest.MyLoadModels(model_dict, neuron_model)
my_nest.MyLoadModels(model_dict, syn_models)
SNR_list = [] # List with SNR groups for synapse.
if n_msn > 0: MSN = MyPoissonInput(n=n_msn, sd=False)
if n_stn > 0: STN = MyPoissonInput(n=n_stn, sd=False)
if n_gpe > 0: GPE = MyPoissonInput(n=n_gpe, sd=False)
if n_msn > 0:
MSN.set_spike_times(rates=[msn_rate],
times=[1],
t_stop=sim_time,
seed=0)
if n_stn > 0:
STN.set_spike_times(rates=[stn_rate],
times=[1],
t_stop=sim_time,
seed=0)
if n_gpe > 0:
GPE.set_spike_times(rates=[gpe_rate],
times=[1],
t_stop=sim_time,
seed=0)
I_e = my_nest.GetDefaults(neuron_model[0])['I_e'] + gpe_current
GPE_target = MyGroup(neuron_model[0],
n=1,
sd=True,
params={'I_e': I_e},
mm_dt=.1,
mm=True)
if n_msn > 0:
my_nest.Connect(MSN[:],
GPE_target[:] * len(MSN[:]),
model=syn_models[0])
if n_stn > 0:
my_nest.Connect(STN[:],
GPE_target[:] * len(STN[:]),
model=syn_models[1])
if n_gpe > 0:
my_nest.Connect(GPE[:],
GPE_target[:] * len(GPE[:]),
model=syn_models[2])
my_nest.MySimulate(sim_time)
GPE_target.get_signal('s', start=0, stop=sim_time)
GPE_target.get_signal('v', recordable='V_m', start=0, stop=sim_time)
return GPE_target
def simulate_get_rates(msn_burst_rate=20, load=True, len_ms=500.):
n_exp = 50
sim_time = DP['SEL_TIME'] + DP['SEL_ONSET'] + 1000.
experiments = range(n_exp)
model_list = models()
my_nest.ResetKernel()
my_nest.MyLoadModels(model_list, DP['NEURON_MODELS'])
my_nest.MyLoadModels(model_list, DP['SYNAPSE_MODELS_TESTED'])
my_nest.MyLoadModels(model_list, DP['SYNAPSE_MODELS_BACKGROUND'])
MSN_list = [] # MSN input for each experiment
for i_exp in experiments:
MSN = MyPoissonInput(n=DP['N_MSN'], sd=True)
MSN_list.append(MSN)
GPE_list = [] # GPE input for each experiment
for i_exp in experiments:
GPE = MyPoissonInput(n=DP['N_GPE'], sd=True)
GPE_list.append(GPE)
SNR_list = [] # SNR groups for each synapse
for i_syn, syn in enumerate(DP['SYNAPSE_MODELS_TESTED']):
I_e = my_nest.GetDefaults(
DP['NEURON_MODELS'][0])['I_e'] + DP['SNR_INJECTED_CURRENT'][i_syn]
SNR = MyGroup(DP['NEURON_MODELS'][0],
n=n_exp,
sd=True,
params={'I_e': I_e})
SNR_list.append(SNR)
for i_exp in experiments:
MSN = MSN_list[i_exp]
GPE = GPE_list[i_exp]
# Set spike times
# Base rate
for id in MSN[1:DP['N_MSN']]:
MSN.set_spike_times(id=id,
rates=[DP['MSN_BASE_RATE']],
times=[1],
t_stop=sim_time,
seed=int(numpy.random.random() * 10000.0))
# Set spike times
# Base rate
for id in GPE[:]:
GPE.set_spike_times(id=id,
rates=[DP['GPE_BASE_RATE']],
times=[1],
t_stop=sim_time,
seed=int(numpy.random.random() * 10000.0))
# Selection
for id in MSN[DP['N_MSN'] - DP['N_MSN_BURST'] - 50:DP['N_MSN'] - 50]:
rates = [DP['MSN_BASE_RATE'], msn_burst_rate, DP['MSN_BASE_RATE']]
times = [1, DP['SEL_ONSET'], DP['SEL_TIME'] + DP['SEL_ONSET']]
t_stop = sim_time
MSN.set_spike_times(id=id,
rates=rates,
times=times,
t_stop=t_stop,
seed=int(numpy.random.random() * 10000.0))
# Connect
for i_syn, syn in enumerate(DP['SYNAPSE_MODELS_TESTED']):
target = SNR_list[i_syn][i_exp]
my_nest.ConvergentConnect(MSN[:], [target], model=syn)
my_nest.ConvergentConnect(GPE[:], [target],
model=DP['SYNAPSE_MODELS_BACKGROUND'][0])
my_nest.MySimulate(sim_time)
for SNR in SNR_list:
SNR.get_signal('s')
rate_ref_1 = str(SNR_list[0].signals['spikes'].mean_rate(
DP['SEL_ONSET'], DP['SEL_ONSET'] + len_ms))
rate_ref_2 = str(SNR_list[1].signals['spikes'].mean_rate(
DP['SEL_ONSET'], DP['SEL_ONSET'] + len_ms))
rate_dyn = str(SNR_list[2].signals['spikes'].mean_rate(
DP['SEL_ONSET'], DP['SEL_ONSET'] + len_ms))
return [rate_ref_1, rate_ref_2, rate_dyn]
def simulate_example(MSN_hz=20, GPE_hz=0, load=True, n_gpe_sel=3, sel_time_GPE=500):
global GPE_BASE_RATE
global STN_BASE_RATE
global MSN_BASE_RATE
global MSN_BURST_TIME
global NEURON_MODELS
global N_GPE
global N_STN
global N_MSN
global N_MSN_BURST
global SNAME
global SPATH
global SYNAPSE_MODELS
global SEL_ONSET
global SNR_INJECTED_CURRENT
n_exp = 200
msn_rate_sel = MSN_hz # Selection rate
gpe_sel_rate = GPE_hz # Selection rate
sel_time_MSN = MSN_BURST_TIME
sim_time = sel_time_MSN+SEL_ONSET+500.
EXPERIMENTS=range(n_exp)
MODEL_LIST=models()
my_nest.ResetKernel()
my_nest.MyLoadModels( MODEL_LIST, NEURON_MODELS )
my_nest.MyLoadModels( MODEL_LIST, SYNAPSE_MODELS)
my_nest.MyLoadModels( MODEL_LIST, SYNAPSE_MODELS_BACKGROUND)
MSN_list=[] # MSN input for each experiment
for i_exp in EXPERIMENTS:
MSN = MyPoissonInput( n=N_MSN+N_MSN_BURST, sd=True)
MSN_list.append(MSN)
GPE_list=[] # GPE input for each experiment
for i_exp in EXPERIMENTS:
GPE = MyPoissonInput( n=N_GPE+n_gpe_sel, sd=True)
GPE_list.append(GPE)
STN_list=[] # GPE input for each experiment
for i_exp in EXPERIMENTS:
STN = MyPoissonInput( n=N_STN, sd=True)
STN_list.append(GPE)
SNR_list=[] # SNR groups for each synapse
for i, SNR_i_c in enumerate(SNR_INJECTED_CURRENT):
I_e=my_nest.GetDefaults(NEURON_MODELS[0])['I_e']+SNR_i_c
SNR = MyGroup( NEURON_MODELS[0], n=n_exp, params={'I_e':I_e},
sd=True, mm=False,
mm_dt=.1, record_from=[''])
SNR_list.append(SNR)
if not load:
for i_exp in EXPERIMENTS:
# MSN
MSN = MSN_list[i_exp]
# Set spike times
# Base rate
for id in MSN[0:N_MSN]:
MSN.set_spike_times(id=id, rates=[MSN_BASE_RATE], times=[1],
t_stop=sim_time,
seed=int(numpy.random.random()*10000.0))
# Selection MSN
for id in MSN[N_MSN:N_MSN+N_MSN_BURST]:
rates = [MSN_BASE_RATE, msn_rate_sel, MSN_BASE_RATE]
times = [1, SEL_ONSET, sel_time_MSN + SEL_ONSET]
t_stop = sim_time
MSN.set_spike_times(id=id, rates=rates, times=times,
t_stop=t_stop,
seed=int(numpy.random.random()*10000.0))
# GPE
GPE = GPE_list[i_exp]
# Set spike times
# Base rate
for id in GPE[:]:
GPE.set_spike_times(id=id, rates=[GPE_BASE_RATE], times=[1],
t_stop=sim_time,
seed=int(numpy.random.random()*10000.0))
# Selection GPE
for id in GPE[N_GPE:N_GPE+n_gpe_sel]:
rates = [GPE_BASE_RATE, gpe_sel_rate, GPE_BASE_RATE]
# If GPe excited smaller selection time
times = [1, SEL_ONSET, sel_time_GPE + SEL_ONSET]
t_stop = sim_time
GPE.set_spike_times(id=id, rates=rates, times=times,
t_stop=t_stop, seed=int(numpy.random.random()*100000.0))
# Base rate STN
for id in STN[:]:
STN.set_spike_times(id=id, rates=[STN_BASE_RATE], times=[1],
t_stop=sim_time,
seed=int(numpy.random.random()*10000.0))
idx_MSN_s=range(0,N_MSN-N_MSN_BURST)
idx_MSN_s.extend(range(N_MSN,N_MSN+N_MSN_BURST))
idx_GPE_s=range(0,N_GPE-n_gpe_sel)
idx_GPE_s.extend(range(N_GPE,N_GPE+n_gpe_sel))
# Connect with MSN burst
target=SNR_list[0][i_exp]
my_nest.ConvergentConnect(MSN[idx_MSN_s], [target], model=SYNAPSE_MODELS[0])
my_nest.ConvergentConnect(GPE[0:N_GPE], [target], model=SYNAPSE_MODELS[1])
my_nest.ConvergentConnect(STN[:], [target], model=SYNAPSE_MODELS_BACKGROUND[0])
# With GPe pause
target=SNR_list[1][i_exp]
my_nest.ConvergentConnect(MSN[0:N_MSN], [target], model=SYNAPSE_MODELS[0])
my_nest.ConvergentConnect(GPE[idx_GPE_s], [target], model=SYNAPSE_MODELS[1])
my_nest.ConvergentConnect(STN[:], [target], model=SYNAPSE_MODELS_BACKGROUND[0])
# With MSN burst and GPe pause
target=SNR_list[2][i_exp]
my_nest.ConvergentConnect(MSN[idx_MSN_s], [target], model=SYNAPSE_MODELS[0])
my_nest.ConvergentConnect(GPE[idx_GPE_s], [target], model=SYNAPSE_MODELS[1])
my_nest.ConvergentConnect(STN[:], [target], model=SYNAPSE_MODELS_BACKGROUND[0])
my_nest.MySimulate( sim_time )
for MSN in MSN_list:
MSN.get_signal( 's' )
for GPE in GPE_list:
GPE.get_signal( 's' )
for SNR in SNR_list:
SNR.get_signal( 's' )
misc.pickle_save([MSN_list, GPE_list,SNR_list] , save_at)
if load:
MSN_list, GPE_list, SNR_list=misc.pickle_load(save_at)
pre_dyn_MSN=str(SNR_list[0].signals['spikes'].mean_rate(SEL_ONSET-500,
SEL_ONSET))
pre_dyn_GPE=str(SNR_list[1].signals['spikes'].mean_rate(SEL_ONSET-500,
SEL_ONSET))
s='\n'
s=s+'Example:\n'
s = s + ' %s %5s %3s \n' % ( 'N experiments:', str ( len(EXPERIMENTS) ), '#' )
s = s + ' %s %5s %3s \n' % ( 'N MSN:', str ( N_MSN ), '#' )
s = s + ' %s %5s %3s \n' % ( 'N GPE:', str ( N_GPE ), '#' )
s='\n'
s = s + ' %s %5s %3s \n' % ( 'Base rate MSN:', str ( MSN_BASE_RATE),'spikes/s' )
s = s + ' %s %5s %3s \n' % ( 'Sel rate MSN:', str ( msn_rate_sel ), 'spikes/s' )
s = s + ' %s %5s %3s \n' % ( 'Sel time MSN:', str ( sel_time_MSN ), 'ms' )
s='\n'
s = s + ' %s %5s %3s \n' % ( 'Base rate GPe:', str ( GPE_BASE_RATE),'spikes/s' )
s = s + ' %s %5s %3s \n' % ( 'Sel rate GPe:', str ( gpe_sel_rate ), 'spikes/s' )
s = s + ' %s %5s %3s \n' % ( 'Sel time GPe:', str ( sel_time_GPE ), 'ms' )
s = s + ' %s %5s %3s \n' % ( 'Pre sel rate Dyn MSN:', pre_dyn_MSN[0:4], 'spikes/s' )
s = s + ' %s %5s %3s \n' % ( 'Pre sel rate Dyn GPe:', pre_dyn_GPE[0:4], 'spikes/s' )
return MSN_list, GPE_list, SNR_list, s
info_string=s
return MSN_hzs, GPE_hzs, data, info_string
def simulate_example(hz_1=0., hz_2=100., load=True):
global I_E
global NEURON_MODELS
global N_GPE
global N_SEL
global N_MSN
global N_STN
global MSN_RATE_BASE
global STN_RATE_BASE
global SNAME
global SPATH
global SYNAPSE_MODELS
global SEL_ONSET
N_EXP = 200
RATE_BASE = 25 # Base rate
RATE_SELE_1 = hz_1
RATE_SELE_2 = hz_2 # Selection rate
SAVE_AT = SPATH + '/' + NEURON_MODELS[0] + '-example.pkl'
SEL_TIME_1 = 500.
SEL_TIME_2 = 200.
sim_time = SEL_TIME_1 + SEL_TIME_2 + SEL_ONSET + 500.
SNAME_NB = hz_1 + hz_2 + 1000
EXPERIMENTS = range(N_EXP)
MODEL_LIST = models()
my_nest.ResetKernel()
my_nest.MyLoadModels(MODEL_LIST, NEURON_MODELS)
my_nest.MyLoadModels(MODEL_LIST, SYNAPSE_MODELS_TESTED)
my_nest.MyLoadModels(MODEL_LIST, SYNAPSE_MODELS_BACKGROUND)
GPE_list = [] # GPE input for each experiment
for i_exp in EXPERIMENTS:
GPE = MyPoissonInput(n=N_GPE, sd=True)
GPE_list.append(GPE)
MSN_list = [] # MSN input for each experiment
for i_exp in EXPERIMENTS:
MSN = MyPoissonInput(n=N_MSN, sd=True)
MSN_list.append(MSN)
STN_list = [] # MSN input for each experiment
for i_exp in EXPERIMENTS:
STN = MyPoissonInput(n=N_STN, sd=True)
STN_list.append(STN)
SNR_list = [] # SNR groups for each synapse
for i_syn in SYNAPSE_MODELS_TESTED:
I_e = my_nest.GetDefaults(NEURON_MODELS[0])['I_e'] + I_E
SNR = MyGroup(NEURON_MODELS[0],
n=N_EXP,
params={'I_e': I_e},
sd=True,
mm=False,
mm_dt=.1,
record_from=[''])
SNR_list.append(SNR)
if not load:
for i_exp in EXPERIMENTS:
GPE = GPE_list[i_exp]
MSN = MSN_list[i_exp]
STN = STN_list[i_exp]
# Set spike times
# Base rate MSN
for id in MSN[:]:
MSN.set_spike_times(id=id,
rates=[MSN_RATE_BASE],
times=[1],
t_stop=sim_time,
seed=int(numpy.random.random() * 10000.0))
# Base rate
for id in GPE[0:N_GPE - N_SEL]:
GPE.set_spike_times(id=id,
rates=[RATE_BASE],
times=[1],
t_stop=sim_time,
seed=int(numpy.random.random() * 10000.0))
# Base rate STN
for id in STN[:]:
STN.set_spike_times(id=id,
rates=[STN_RATE_BASE],
times=[1],
t_stop=sim_time,
seed=int(numpy.random.random() * 10000.0))
# Selection
for id in GPE[N_GPE - N_SEL:N_GPE]:
rates = [RATE_BASE, RATE_SELE_1, RATE_SELE_2, RATE_BASE]
times = [
1, SEL_ONSET, SEL_ONSET + SEL_TIME_1,
SEL_ONSET + SEL_TIME_1 + SEL_TIME_2
]
t_stop = sim_time
GPE.set_spike_times(id=id,
rates=rates,
times=times,
t_stop=t_stop,
seed=int(numpy.random.random() * 10000.0))
# Connect
for i, syn in enumerate(SYNAPSE_MODELS_TESTED):
target = SNR_list[i][i_exp]
my_nest.ConvergentConnect(GPE[:], [target], model=syn)
my_nest.ConvergentConnect(MSN[:], [target],
model=SYNAPSE_MODELS_BACKGROUND[0])
my_nest.ConvergentConnect(STN[:], [target],
model=SYNAPSE_MODELS_BACKGROUND[1])
my_nest.MySimulate(sim_time)
for GPE in GPE_list:
GPE.get_signal('s')
for SNR in SNR_list:
SNR.get_signal('s')
misc.pickle_save([GPE_list, SNR_list], SAVE_AT)
elif load:
GPE_list, SNR_list = misc.pickle_load(SAVE_AT)
pre_ref = str(SNR_list[0].signals['spikes'].mean_rate(
SEL_ONSET - 500, SEL_ONSET))
pre_dyn = str(SNR_list[1].signals['spikes'].mean_rate(
SEL_ONSET - 500, SEL_ONSET))
statusSynapes = []
for syn in SYNAPSE_MODELS_TESTED:
statusSynapes.append(my_nest.GetDefaults(syn))
s = '\n'
s = s + 'Example:\n'
s = s + ' %s %5s %3s \n' % ('N experiments:', str(len(EXPERIMENTS)), '#')
s = s + ' %s %5s %3s \n' % ('N GPEs:', str(N_GPE), '#')
s = s + ' %s %5s %3s \n' % ('Base rate:', str(RATE_BASE), 'spikes/s')
s = s + ' %s %5s %3s \n' % ('Selection rate:', str(RATE_SELE_1),
'spikes/s')
s = s + ' %s %5s %3s \n' % ('Selection time:', str(SEL_TIME_1), 'ms')
s = s + ' %s %5s %3s \n' % ('Selection rate:', str(RATE_SELE_2),
'spikes/s')
s = s + ' %s %5s %3s \n' % ('Selection time:', str(SEL_TIME_2), 'ms')
s = s + ' %s %5s %3s \n' % ('Pre sel rate Ref:', pre_ref[0:4], 'spikes/s')
s = s + ' %s %5s %3s \n' % ('Pre sel rate Dyn:', pre_dyn[0:4], 'spikes/s')
for ss in statusSynapes:
s = s + '\n'
s = s + ' %s %10s\n' % ('Synapse', ss['synapsemodel'])
s = s + ' %s %5s %3s\n' % ('Weight', str(round(ss['weight'], 1)), 'nS')
return GPE_list, SNR_list, s
def simulate_example(hz=0, load=True):
global SNR_INJECTED_CURRENT
global NEURON_MODELS
global N_GPE
global N_SEL
global N_MSN
global N_STN
global MSN_RATE_BASE
global STN_BASE_RATE
global SNAME
global SPATH
global SYNAPSE_MODELS
global SEL_ONSET
global GPE_BASE_RATE
#n_exp = 20
n_exp = 200
RATE_SELE = hz # Selection rate
save_at = SPATH + '/' + NEURON_MODELS[0] + '-example.pkl'
sim_time = SEL_TIME + SEL_ONSET + 500.
SNAME_NB = hz + 1000
experiments = range(n_exp)
MODEL_LIST = models()
my_nest.ResetKernel()
my_nest.MyLoadModels(MODEL_LIST, NEURON_MODELS)
my_nest.MyLoadModels(MODEL_LIST, SYNAPSE_MODELS_TESTED)
my_nest.MyLoadModels(MODEL_LIST, SYNAPSE_MODELS_BACKGROUND)
GPE_list = [] # GPE input for each experiment
for i_exp in experiments:
GPE = MyPoissonInput(n=N_GPE,
sd=True,
spath=SPATH,
sname_nb=SNAME_NB + i_exp)
GPE_list.append(GPE)
MSN_list = [] # MSN input for each experiment
for i_exp in experiments:
MSN = MyPoissonInput(n=N_MSN, sd=False)
MSN_list.append(MSN)
STN_list = [] # MSN input for each experiment
for i_exp in experiments:
STN = MyPoissonInput(n=N_STN, sd=False)
STN_list.append(STN)
SNR_list = [] # SNR groups for each synapse
I_e = my_nest.GetDefaults(NEURON_MODELS[0])['I_e'] + SNR_INJECTED_CURRENT
for i_syn in range(len(SYNAPSE_MODELS_TESTED)):
SNR = MyGroup(NEURON_MODELS[0], n=n_exp, params={'I_e': I_e}, sd=True)
SNR_list.append(SNR)
if not load:
for i_exp in experiments:
GPE = GPE_list[i_exp]
MSN = MSN_list[i_exp]
STN = STN_list[i_exp]
# Set spike times
# Base rate MSN
for id in MSN[:]:
MSN.set_spike_times(id=id,
rates=[MSN_RATE_BASE],
times=[1],
t_stop=sim_time,
seed=int(numpy.random.random() * 10000.0))
# Base rate STN
for id in STN[:]:
STN.set_spike_times(id=id,
rates=[STN_BASE_RATE],
times=[1],
t_stop=sim_time,
seed=int(numpy.random.random() * 10000.0))
# Set spike times
# Base rate
for id in GPE[0:N_GPE - N_SEL]:
GPE.set_spike_times(id=id,
rates=[GPE_BASE_RATE],
times=[1],
t_stop=sim_time,
seed=int(numpy.random.random() * 10000.0))
# Selection
for id in GPE[N_GPE - N_SEL:N_GPE]:
rates = [GPE_BASE_RATE, RATE_SELE, GPE_BASE_RATE]
times = [1, SEL_ONSET, SEL_TIME + SEL_ONSET]
t_stop = sim_time
GPE.set_spike_times(id=id,
rates=rates,
times=times,
t_stop=t_stop,
seed=int(numpy.random.random() * 10000.0))
# Connect
for i_syn, syn in enumerate(SYNAPSE_MODELS_TESTED):
target = SNR_list[i_syn][i_exp]
my_nest.ConvergentConnect(GPE[:], [target], model=syn)
my_nest.ConvergentConnect(MSN[:], [target],
model=SYNAPSE_MODELS_BACKGROUND[0])
my_nest.ConvergentConnect(STN[:], [target],
model=SYNAPSE_MODELS_BACKGROUND[1])
my_nest.MySimulate(sim_time)
for GPE in GPE_list:
GPE.get_signal('s')
for SNR in SNR_list:
SNR.get_signal('s')
misc.pickle_save([GPE_list, SNR_list], save_at)
elif load:
GPE_list, SNR_list = misc.pickle_load(save_at)
pre_ref = str(SNR_list[0].signals['spikes'].mean_rate(
SEL_ONSET - 5000, SEL_ONSET))
pre_dyn = str(SNR_list[1].signals['spikes'].mean_rate(
SEL_ONSET - 500, SEL_ONSET))
statusSynapes = []
for syn in SYNAPSE_MODELS_TESTED:
statusSynapes.append(my_nest.GetDefaults(syn))
s = '\n'
s = s + 'Example:\n'
s = s + ' %s %5s %3s \n' % ('N experiments:', str(len(experiments)), '#')
s = s + ' %s %5s %3s \n' % ('N GPEs:', str(N_GPE), '#')
s = s + ' %s %5s %3s \n' % ('Base rate:', str(GPE_BASE_RATE), 'spikes/s')
s = s + ' %s %5s %3s \n' % ('Selection rate:', str(RATE_SELE), 'spikes/s')
s = s + ' %s %5s %3s \n' % ('Selection time:', str(SEL_TIME), 'ms')
s = s + ' %s %5s %3s \n' % ('Pre sel rate Ref:', pre_ref[0:4], 'spikes/s')
s = s + ' %s %5s %3s \n' % ('Pre sel rate Dyn:', pre_dyn[0:4], 'spikes/s')
for ss in statusSynapes:
s = s + '\n'
s = s + ' %s %10s\n' % ('Synapse', ss['synapsemodel'])
s = s + ' %s %5s %3s\n' % ('Weight', str(round(ss['weight'], 1)), 'nS')
return GPE_list, SNR_list, s
def simulate_selection_vs_neurons(selRateInterval=[0.0, 500.0],
hz=0,
load=True):
global SEL_ONSET
global SNR_INJECTED_CURRENT
global N_GPE
global N_STN
global MSN_RATE_BASE
global GPE_BASE_RATE
global STN_BASE_RATE
SNAME_NB = hz
#n_exp=200
n_exp = 20
N_MAX_SEL = N_GPE + 1 # Plus one to account for the case when all GPe have stopped
RATE_SELE = hz
save_at = (SPATH + '/' + NEURON_MODELS[0] + '-' + str(SNAME_NB) +
'-hz.pkl')
#SEL_TIME = 1000.
sim_time = SEL_TIME + SEL_ONSET + 500.
experiments = range(n_exp)
MODEL_LIST = models()
my_nest.ResetKernel()
my_nest.MyLoadModels(MODEL_LIST, NEURON_MODELS)
my_nest.MyLoadModels(MODEL_LIST, SYNAPSE_MODELS_TESTED)
my_nest.MyLoadModels(MODEL_LIST, SYNAPSE_MODELS_BACKGROUND)
GPE_list = [] # GPE input for each experiment
for i_exp in experiments:
GPE = MyPoissonInput(n=N_GPE + N_MAX_SEL)
GPE_list.append(GPE)
MSN_list = [] # MSN input for each experiment
for i_exp in experiments:
MSN = MyPoissonInput(n=N_MSN, sd=True)
MSN_list.append(MSN)
STN_list = [] # STN input for each experiment
for i_exp in experiments:
STN = MyPoissonInput(n=N_STN, sd=True)
STN_list.append(STN)
SNR_list = [] # SNR groups for each synapse and number of selected GPE
I_e = my_nest.GetDefaults(NEURON_MODELS[0])['I_e'] + SNR_INJECTED_CURRENT
for i, i_syn in enumerate(SYNAPSE_MODELS_TESTED):
SNR = []
for i_sel in range(N_MAX_SEL):
SNR.append(
MyGroup(NEURON_MODELS[0],
n=n_exp,
params={'I_e': I_e},
sd=True,
sd_params={
'start': 0.,
'stop': sim_time
}))
SNR_list.append(SNR)
if not load:
for i_exp in experiments:
GPE = GPE_list[i_exp]
MSN = MSN_list[i_exp]
STN = STN_list[i_exp]
# Set spike times
# Base rate
for id in MSN[:]:
MSN.set_spike_times(id=id,
rates=[MSN_RATE_BASE],
times=[1],
t_stop=sim_time,
seed=int(numpy.random.random() * 10000.0))
# Base rate STN
for id in STN[:]:
STN.set_spike_times(id=id,
rates=[STN_BASE_RATE],
times=[1],
t_stop=sim_time,
seed=int(numpy.random.random() * 10000.0))
# Set spike times
# Base rate
for id in GPE[0:N_GPE]:
GPE.set_spike_times(id=id,
rates=[GPE_BASE_RATE],
times=[1],
t_stop=sim_time,
seed=int(numpy.random.random() * 10000.0))
# Selection
for id in GPE[N_GPE:N_GPE + N_MAX_SEL]:
rates = [GPE_BASE_RATE, RATE_SELE, GPE_BASE_RATE]
times = [1, SEL_ONSET, SEL_TIME + SEL_ONSET]
t_stop = sim_time
GPE.set_spike_times(id=id,
rates=rates,
times=times,
t_stop=t_stop,
seed=int(numpy.random.random() * 10000.0))
# Connect
for i, syn in enumerate(SYNAPSE_MODELS_TESTED):
for i_sel in range(N_MAX_SEL):
target = SNR_list[i][i_sel][i_exp]
my_nest.ConvergentConnect(GPE[0:N_GPE - i_sel], [target],
model=syn)
my_nest.ConvergentConnect(GPE[N_GPE:N_GPE + i_sel],
[target],
model=syn)
my_nest.ConvergentConnect(
MSN[:], [target], model=SYNAPSE_MODELS_BACKGROUND[0])
my_nest.ConvergentConnect(
STN[:], [target], model=SYNAPSE_MODELS_BACKGROUND[1])
my_nest.MySimulate(sim_time)
for SNR_sel in SNR_list:
for SNR in SNR_sel:
SNR.get_signal('s')
misc.pickle_save_groups(SNR_list, save_at)
elif load:
SNR_list = misc.pickle_load_groups(save_at)
t1 = selRateInterval[0]
t2 = selRateInterval[1]
mean_rates = []
delay = my_nest.GetDefaults(SYNAPSE_MODELS_TESTED[0])['delay']
for SNR_sel in SNR_list:
m_r = []
for SNR in SNR_sel:
m_r_pre = SNR.signals['spikes'].mean_rate(SEL_ONSET - (t2 - t1),
SEL_ONSET)
m_r_post = SNR.signals['spikes'].mean_rate(SEL_ONSET + t1 + delay,
SEL_ONSET + t2 + delay)
m_r.append(m_r_post)
mean_rates.append(m_r)
mean_rates = numpy.array(mean_rates)
nb_neurons = numpy.arange(0, N_MAX_SEL, 1)
s = '\n'
s = s + ' %s %5s %3s \n' % ('N GPEs:', str(N_GPE), '#')
s = s + ' %s %5s %3s \n' % ('N experiments:', str(n_exp), '#')
s = s + ' %s %5s %3s \n' % ('Base rate:', str(GPE_BASE_RATE), 'spikes/s')
s = s + ' %s %5s %3s \n' % ('Selection rate:', str(RATE_SELE), 'spikes/s')
s = s + ' %s %5s %3s \n' % ('Selection time:', str(SEL_TIME), 'ms')
s = s + ' %s %5s %3s \n' % ('SNR_INJECTED_CURRENT:',
str(SNR_INJECTED_CURRENT), 'pA')
info_string = s
return nb_neurons, mean_rates, info_string
def simulate_steady_state_freq(frequencies, flag='ss', load=True):
# Path were raw data is saved. For example the spike trains.
save_result_at=OUTPUT_PATH+'/simulate_steady_state_freq.pkl'
save_header_at=OUTPUT_PATH+'/simulate_steady_state_freq_header'
relativeFacilitation=[]
n=len(frequencies)
if not load:
for syn in SYNAPSE_MODELS:
my_nest.ResetKernel()
model_list, model_dict=models()
my_nest.MyLoadModels( model_list, NEURON_MODELS )
my_nest.MyLoadModels( model_list, [syn])
SNR = MyGroup( NEURON_MODELS[0], n, mm=True, mm_dt = .1,
params={'I_e':-150.},
record_from=['g_AMPA'] )
tSim=5*1000/frequencies[0]
spikeTimes=[]
tmpSteadyState=[]
for f in frequencies :
isi = 1000./f
spikeTimes.append(numpy.arange(1,tSim,isi))
for target, st in zip(SNR, spikeTimes ) :
source = my_nest.Create('spike_generator',
params={'spike_times':st} )
my_nest.SetDefaults(syn, params={'delay':1.})
my_nest.Connect(source, [target], model=syn)
my_nest.MySimulate(tSim)
SNR.get_signal( 'g','g_AMPA', stop=tSim ) # retrieve signal
signal=SNR.signals['g_AMPA']
for i, st in enumerate(spikeTimes, start=1):
if SNR.mm_dt==0.1: indecies=numpy.int64(numpy.ceil(st*10))+9
elif SNR.mm_dt==1.: indecies=numpy.int64(numpy.ceil(st))
values=signal[i].signal[indecies]-signal[i].signal[indecies-1]
ss=my_nest.GetDefaults(syn)
synapticEficacy = ss['weight']*ss['U']
if flag=='ss': tmpSteadyState.append(values[-1]/synapticEficacy)
if flag=='max': tmpSteadyState.append(max(values)/synapticEficacy)
relativeFacilitation.append(tmpSteadyState)
relativeFacilitation=numpy.array(relativeFacilitation)
header=HEADER_SIMULATION_SETUP
misc.text_save(header, save_header_at)
misc.pickle_save([frequencies, relativeFacilitation], save_result_at)
elif load:
frequencies, relativeFacilitation=misc.pickle_load(save_result_at)
return frequencies, relativeFacilitation
def simulate_recovery(revoceryTimes, load=True):
# Path were raw data is saved. For example the spike trains.
save_result_at=OUTPUT_PATH+'/simulate_recovery.pkl'
save_header_at=OUTPUT_PATH+'/simulate_recovery_header'
relativeRecovery=[]
n=len(revoceryTimes)
if not load:
for syn in SYNAPSE_MODELS:
my_nest.ResetKernel()
model_list, model_dict=models()
my_nest.MyLoadModels( model_list, NEURON_MODELS )
my_nest.MyLoadModels( model_list, [syn])
ss=my_nest.GetDefaults(syn)
synapticEficacy = ss['weight']*ss['U']
SNR = MyGroup( NEURON_MODELS[0], n, mm=True, mm_dt = .1,
params={'I_e':-150.}, record_from=['g_AMPA'])
tSim=10000
spikeTimes=[]
for rt in revoceryTimes:
#spikeTimes.append(numpy.array([1.,11.,21.,31.,41.,41+rt]))
# Choosen so that it starts at a pairpulse ration of 0.2
spikeTimes.append(numpy.array([1.,11.,21.,31.,41.,
51.,61.,71.,81.,91.,
101.,111.,121.,131.,141.,
151.,161.,171.,181.,191.,
191+rt]))
for target, st in zip(SNR, spikeTimes ) :
source = my_nest.Create('spike_generator',
params={'spike_times':st} )
my_nest.SetDefaults(syn, params={'delay':1.})
my_nest.Connect(source, [target], model=syn)
my_nest.MySimulate(tSim)
SNR.get_signal( 'g','g_AMPA', stop=tSim ) # retrieve signal
signal=SNR.signals['g_AMPA']
tmpSteadyState=[]
for i, st in enumerate(spikeTimes, start=1):
if SNR.mm_dt==0.1: indecies=numpy.int64(numpy.ceil(st*10))+9
elif SNR.mm_dt==1.: indecies=numpy.int64(numpy.ceil(st))
values=signal[i].signal[indecies]-signal[i].signal[indecies-1]
tmpSteadyState.append(values[-1]/synapticEficacy)
#tmpSteadyState.append(max(values)/synapticEficacy)
relativeRecovery.append(tmpSteadyState)
relativeRecovery=numpy.array(relativeRecovery)
header=HEADER_SIMULATION_SETUP
misc.text_save(header, save_header_at)
misc.pickle_save([revoceryTimes, relativeRecovery], save_result_at)
elif load:
revoceryTimes, relativeRecovery=misc.pickle_load(save_result_at)
return revoceryTimes, relativeRecovery
