def test_v6_basic_message_unicast_local_solicit():
# Server MUST discard any Solicit it receives with
# a unicast address destination
# Message details Client Server
# LINK_LOCAL_UNICAST dest SOLICIT -->
# X ADVERTISE
# correct message SOLICIT -->
# <-- ADVERTISE
misc.test_setup()
srv_control.config_srv_subnet('3000::/64', '3000::1-3000::ff')
srv_control.build_and_send_config_files('SSH', 'config-file')
srv_control.start_srv('DHCP', 'started')
misc.test_procedure()
srv_msg.client_requests_option('7')
srv_msg.unicast_addres(None, 'LINK_LOCAL')
srv_msg.client_does_include('Client', None, 'client-id')
srv_msg.client_does_include('Client', None, 'IA-NA')
srv_msg.client_send_msg('SOLICIT')
misc.pass_criteria()
srv_msg.send_dont_wait_for_message()
misc.test_procedure()
srv_msg.client_requests_option('7')
srv_msg.client_does_include('Client', None, 'client-id')
srv_msg.client_does_include('Client', None, 'IA-NA')
srv_msg.client_send_msg('SOLICIT')
misc.pass_criteria()
srv_msg.send_wait_for_message('MUST', None, 'ADVERTISE')
srv_msg.response_check_include_option('Response', None, '3')
srv_msg.response_check_option_content('Response', '3', None, 'sub-option', '5')
references.references_check('RFC3315')
def test_v6_basic_message_unicast_local_solicit():
# Server MUST discard any Solicit it receives with
# a unicast address destination
# Message details Client Server
# LINK_LOCAL_UNICAST dest SOLICIT -->
# X ADVERTISE
# correct message SOLICIT -->
# <-- ADVERTISE
misc.test_setup()
srv_control.config_srv_subnet('3000::/64', '3000::1-3000::ff')
srv_control.build_and_send_config_files()
srv_control.start_srv('DHCP', 'started')
misc.test_procedure()
srv_msg.client_requests_option(7)
srv_msg.unicast_addres(None, 'LINK_LOCAL')
srv_msg.client_does_include('Client', 'client-id')
srv_msg.client_does_include('Client', 'IA-NA')
srv_msg.client_send_msg('SOLICIT')
misc.pass_criteria()
srv_msg.send_dont_wait_for_message()
misc.test_procedure()
srv_msg.client_requests_option(7)
srv_msg.client_does_include('Client', 'client-id')
srv_msg.client_does_include('Client', 'IA-NA')
srv_msg.client_send_msg('SOLICIT')
misc.pass_criteria()
srv_msg.send_wait_for_message('MUST', 'ADVERTISE')
srv_msg.response_check_include_option(3)
srv_msg.response_check_option_content(3, 'sub-option', 5)
references.references_check('RFC3315')
def test_v6_relay_message_unicast_global():
misc.test_setup()
srv_control.config_srv_subnet_with_iface('$(SERVER_IFACE)',
'$(SRV_IPV6_ADDR_GLOBAL)',
'3000::/64', '3000::1-3000::ff')
srv_control.build_and_send_config_files()
srv_control.start_srv('DHCP', 'started')
misc.test_procedure()
srv_msg.client_requests_option(7)
srv_msg.client_does_include('Client', 'client-id')
srv_msg.client_does_include('Client', 'IA-NA')
srv_msg.client_send_msg('SOLICIT')
srv_msg.unicast_addres('GLOBAL', None)
srv_msg.client_does_include('RelayAgent', 'interface-id')
srv_msg.create_relay_forward()
misc.pass_criteria()
srv_msg.send_wait_for_message('MUST', 'RELAYREPLY')
srv_msg.response_check_include_option(18)
srv_msg.response_check_include_option(9)
references.references_check('RFC3315')
def test_v6_relay_message_unicast_global():
misc.test_setup()
srv_control.config_srv_subnet_with_iface('$(SERVER_IFACE)',
'$(SRV_IPV6_ADDR_GLOBAL)',
'3000::/64',
'3000::1-3000::ff')
srv_control.build_and_send_config_files('SSH', 'config-file')
srv_control.start_srv('DHCP', 'started')
misc.test_procedure()
srv_msg.client_requests_option('7')
srv_msg.client_does_include('Client', None, 'client-id')
srv_msg.client_does_include('Client', None, 'IA-NA')
srv_msg.client_send_msg('SOLICIT')
srv_msg.unicast_addres('GLOBAL', None)
srv_msg.client_does_include('RelayAgent', None, 'interface-id')
srv_msg.create_relay_forward()
misc.pass_criteria()
srv_msg.send_wait_for_message('MUST', None, 'RELAYREPLY')
srv_msg.response_check_include_option('Response', None, '18')
srv_msg.response_check_include_option('Response', None, '9')
references.references_check('RFC3315')
def test_v6_basic_message_unicast_global_inforequest():
# Server MUST discard any Information-Request it receives with
# a unicast address destination.
# Message details Client Server
# GLOBAL_UNICAST dest INFOREQUEST -->
# X REPLY
# correct message INFOREQUEST -->
# <-- REPLY
# Pass Criteria:
# REPLY MUST include option:
# client-id
# server-id
misc.test_setup()
srv_control.config_srv_subnet_with_iface('$(SERVER_IFACE)',
'$(SRV_IPV6_ADDR_GLOBAL)',
'3000::/64',
'3000::1-3000::ff')
srv_control.config_srv_opt('preference', '123')
srv_control.build_and_send_config_files('SSH', 'config-file')
srv_control.start_srv('DHCP', 'started')
misc.test_procedure()
srv_msg.client_requests_option('7')
srv_msg.unicast_addres('GLOBAL', None)
# message wont contain client-id option
srv_msg.client_send_msg('INFOREQUEST')
misc.pass_criteria()
srv_msg.send_dont_wait_for_message()
misc.test_procedure()
# message wont contain client-id option
srv_msg.client_requests_option('7')
srv_msg.client_send_msg('INFOREQUEST')
misc.pass_criteria()
srv_msg.send_wait_for_message('MUST', None, 'REPLY')
srv_msg.response_check_include_option('Response', 'NOT ', '1')
srv_msg.response_check_include_option('Response', None, '2')
srv_msg.response_check_include_option('Response', None, '7')
references.references_check('RFC3315')
def test_v6_basic_message_unicast_global_inforequest():
# Server MUST discard any Information-Request it receives with
# a unicast address destination.
# Message details Client Server
# GLOBAL_UNICAST dest INFOREQUEST -->
# X REPLY
# correct message INFOREQUEST -->
# <-- REPLY
# Pass Criteria:
# REPLY MUST include option:
# client-id
# server-id
misc.test_setup()
srv_control.config_srv_subnet_with_iface('$(SERVER_IFACE)',
'$(SRV_IPV6_ADDR_GLOBAL)',
'3000::/64',
'3000::1-3000::ff')
srv_control.config_srv_opt('preference', '123')
srv_control.build_and_send_config_files()
srv_control.start_srv('DHCP', 'started')
misc.test_procedure()
srv_msg.client_requests_option(7)
srv_msg.unicast_addres('GLOBAL', None)
# message wont contain client-id option
srv_msg.client_send_msg('INFOREQUEST')
misc.pass_criteria()
srv_msg.send_dont_wait_for_message()
misc.test_procedure()
# message wont contain client-id option
srv_msg.client_requests_option(7)
srv_msg.client_send_msg('INFOREQUEST')
misc.pass_criteria()
srv_msg.send_wait_for_message('MUST', 'REPLY')
srv_msg.response_check_include_option(1, expect_include=False)
srv_msg.response_check_include_option(2)
srv_msg.response_check_include_option(7)
references.references_check('RFC3315')
def test_v6_basic_message_unicast_local_inforequest():
# Server MUST discard any Information-Request it receives with
# a unicast address destination.
# Message details Client Server
# LINK_LOCAL
# UNICAST dest INFOREQUEST -->
# X REPLY
# correct message INFOREQUEST -->
# <-- REPLY
# Pass Criteria:
# REPLY MUST include option:
# client-id
# server-id
misc.test_setup()
srv_control.config_srv_subnet('3000::/64', '3000::1-3000::ff')
srv_control.config_srv_opt('preference', '123')
srv_control.build_and_send_config_files('SSH', 'config-file')
srv_control.start_srv('DHCP', 'started')
misc.test_procedure()
srv_msg.client_requests_option('7')
srv_msg.unicast_addres(None, 'LINK_LOCAL')
# message wont contain client-id option
srv_msg.client_send_msg('INFOREQUEST')
misc.pass_criteria()
srv_msg.send_dont_wait_for_message()
misc.test_procedure()
srv_msg.client_requests_option('7')
# message wont contain client-id option
srv_msg.client_send_msg('INFOREQUEST')
misc.pass_criteria()
srv_msg.send_wait_for_message('MUST', None, 'REPLY')
srv_msg.response_check_include_option('Response', 'NOT ', '1')
srv_msg.response_check_include_option('Response', None, '2')
srv_msg.response_check_include_option('Response', None, '7')
references.references_check('RFC3315')
def test_v6_basic_message_unicast_global_solicit():
# Server MUST discard any Solicit it receives with
# a unicast address destination
# Message details Client Server
# GLOBAL_UNICAST dest SOLICIT -->
# X ADVERTISE
# correct message SOLICIT -->
# <-- ADVERTISE
misc.test_setup()
srv_control.config_srv_subnet_with_iface('$(SERVER_IFACE)',
'$(SRV_IPV6_ADDR_GLOBAL)',
'3000::/64', '3000::1-3000::ff')
# Server is configured with
srv_control.build_and_send_config_files('SSH', 'config-file')
srv_control.start_srv('DHCP', 'started')
misc.test_procedure()
srv_msg.client_requests_option('7')
srv_msg.unicast_addres('GLOBAL', None)
srv_msg.client_does_include('Client', None, 'client-id')
srv_msg.client_does_include('Client', None, 'IA-NA')
srv_msg.client_send_msg('SOLICIT')
misc.pass_criteria()
srv_msg.send_dont_wait_for_message()
misc.test_procedure()
srv_msg.client_requests_option('7')
srv_msg.client_does_include('Client', None, 'client-id')
srv_msg.client_does_include('Client', None, 'IA-NA')
srv_msg.client_send_msg('SOLICIT')
misc.pass_criteria()
srv_msg.send_wait_for_message('MUST', None, 'ADVERTISE')
srv_msg.response_check_include_option('Response', None, '3')
srv_msg.response_check_option_content('Response', '3', None, 'sub-option',
'5')
references.references_check('RFC3315')
def test_v6_relay_message_unicast_local():
misc.test_setup()
# Server is configured with 3000::/64 subnet with 3000::1-3000::ff pool.
srv_control.config_srv_subnet_with_iface('$(SERVER_IFACE)',
'$(SRV_IPV6_ADDR_LINK_LOCAL)',
'3000::/64',
'3000::1-3000::ff')
srv_control.build_and_send_config_files('SSH', 'config-file')
srv_control.start_srv('DHCP', 'started')
misc.test_procedure()
srv_msg.client_does_include('Client', None, 'client-id')
srv_msg.client_does_include('Client', None, 'IA-NA')
srv_msg.client_send_msg('SOLICIT')
srv_msg.unicast_addres(None, 'LINK_LOCAL')
srv_msg.client_does_include('RelayAgent', None, 'interface-id')
srv_msg.create_relay_forward()
misc.pass_criteria()
srv_msg.send_dont_wait_for_message()
srv_msg.response_check_include_option('Response', None, '9')
misc.test_procedure()
srv_msg.client_does_include('Client', None, 'client-id')
srv_msg.client_does_include('Client', None, 'IA-NA')
srv_msg.client_send_msg('SOLICIT')
srv_msg.client_does_include('RelayAgent', None, 'interface-id')
srv_msg.create_relay_forward()
misc.pass_criteria()
srv_msg.send_wait_for_message('MUST', None, 'RELAYREPLY')
srv_msg.response_check_include_option('Response', None, '18')
srv_msg.response_check_include_option('Response', None, '9')
references.references_check('RFC3315')
def test_v6_basic_message_unicast_global_confirm():
# Server MUST discard any Confirm it receives with
# a unicast address destination
# Message details Client Server
# SOLICIT -->
# <-- ADVERTISE
# REQUEST -->
# <-- REPLY
# GLOBAL_UNICAST dest CONFIRM -->
# X REPLY
# correct message CONFIRM -->
# <-- REPLY
# Pass Criteria:
# REPLY MUST include option:
# client-id
# server-id
misc.test_setup()
# Server is configured with 3000::/64 subnet with 3000::1-3000::ff pool.
srv_control.config_srv_subnet_with_iface('$(SERVER_IFACE)',
'$(SRV_IPV6_ADDR_GLOBAL)',
'3000::/64',
'3000::1-3000::ff')
srv_control.build_and_send_config_files('SSH', 'config-file')
srv_control.start_srv('DHCP', 'started')
misc.test_procedure()
srv_msg.client_requests_option('7')
srv_msg.client_does_include('Client', None, 'client-id')
srv_msg.client_does_include('Client', None, 'IA-NA')
srv_msg.client_send_msg('SOLICIT')
misc.pass_criteria()
srv_msg.send_wait_for_message('MUST', None, 'ADVERTISE')
srv_msg.response_check_include_option('Response', None, '3')
srv_msg.response_check_option_content('Response', '3', None, 'sub-option', '5')
misc.test_procedure()
srv_msg.client_copy_option('IA_NA')
srv_msg.client_copy_option('server-id')
srv_msg.client_requests_option('7')
srv_msg.client_does_include('Client', None, 'client-id')
srv_msg.client_send_msg('REQUEST')
misc.pass_criteria()
srv_msg.send_wait_for_message('MUST', None, 'REPLY')
misc.test_procedure()
srv_msg.client_save_option('IA_NA')
srv_msg.client_add_saved_option('DONT ')
srv_msg.unicast_addres('GLOBAL', None)
srv_msg.client_does_include('Client', None, 'client-id')
srv_msg.client_send_msg('CONFIRM')
misc.pass_criteria()
srv_msg.send_dont_wait_for_message()
misc.test_procedure()
srv_msg.client_add_saved_option(None)
srv_msg.client_does_include('Client', None, 'client-id')
srv_msg.client_send_msg('CONFIRM')
misc.pass_criteria()
srv_msg.send_wait_for_message('MUST', None, 'REPLY')
srv_msg.response_check_include_option('Response', None, '1')
srv_msg.response_check_include_option('Response', None, '2')
srv_msg.response_check_include_option('Response', None, '13')
references.references_check('RFC3315')
def test_v6_basic_message_unicast_local_release():
# Server MUST discard any RELEASE message it receives with
# a unicast address destination, and send back REPLY with
# UseMulticast status code.
#
# Message details Client Server
# SOLICIT -->
# <-- ADVERTISE
# REQUEST -->
# <-- REPLY
# LINK_LOCAL
# UNICAST dest RELEASE -->
# <-- REPLY
# Pass Criteria:
# REPLY MUST include option:
# client-id
# server-id
# status-code with UseMulticast
# correct message RELEASE -->
# <-- REPLY
# Pass Criteria:
# REPLY MUST include option:
# client-id
# server-id
# status-code with Success
misc.test_setup()
srv_control.config_srv_subnet('3000::/64', '3000::1-3000::ff')
srv_control.build_and_send_config_files('SSH', 'config-file')
srv_control.start_srv('DHCP', 'started')
misc.test_procedure()
srv_msg.client_requests_option('7')
srv_msg.client_does_include('Client', None, 'client-id')
srv_msg.client_does_include('Client', None, 'IA-NA')
srv_msg.client_send_msg('SOLICIT')
misc.pass_criteria()
srv_msg.send_wait_for_message('MUST', None, 'ADVERTISE')
misc.test_procedure()
srv_msg.client_copy_option('IA_NA')
srv_msg.client_copy_option('server-id')
srv_msg.client_does_include('Client', None, 'client-id')
srv_msg.client_send_msg('REQUEST')
misc.pass_criteria()
srv_msg.send_wait_for_message('MUST', None, 'REPLY')
misc.test_procedure()
srv_msg.unicast_addres(None, 'LINK_LOCAL')
srv_msg.client_save_option('IA_NA')
srv_msg.client_save_option('server-id')
srv_msg.client_add_saved_option('DONT ')
srv_msg.client_does_include('Client', None, 'client-id')
srv_msg.client_send_msg('RELEASE')
misc.pass_criteria()
srv_msg.send_wait_for_message('MUST', None, 'REPLY')
srv_msg.response_check_include_option('Response', None, '13')
srv_msg.response_check_option_content('Response', '13', None, 'statuscode',
'5')
misc.test_procedure()
srv_msg.client_add_saved_option(None)
srv_msg.client_does_include('Client', None, 'client-id')
srv_msg.client_send_msg('RELEASE')
misc.pass_criteria()
srv_msg.send_wait_for_message('MUST', None, 'REPLY')
srv_msg.response_check_include_option('Response', None, '1')
srv_msg.response_check_include_option('Response', None, '2')
srv_msg.response_check_include_option('Response', None, '13')
references.references_check('RFC3315')
def test_v6_basic_message_unicast_local_request():
# Server MUST discard any Request message it receives with
# a unicast address destination, and send back REPLY with
# UseMulticast status code.
# In this test if it fails with 'NoAddrAvail' at the end
# it means that server has send back REPLY with UseMulticast
# status code but also assigned address.
# Message details Client Server
# SOLICIT -->
# <-- ADVERTISE
# LINK_LOCAL
# UNICAST dest REQUEST -->
# <-- REPLY
# Pass Criteria:
# REPLY MUST include option:
# client-id
# server-id
# status code option with UseMulticast
#
# SOLICIT -->
# <-- ADVERTISE
# correct message REQUEST -->
# <-- REPLY
# REPLY MUST include option:
# client-id
# server-id
# IA_NA
# IA_Address with address 3000::1.
misc.test_setup()
srv_control.config_srv_subnet('3000::/64', '3000::1-3000::1')
srv_control.build_and_send_config_files('SSH', 'config-file')
srv_control.start_srv('DHCP', 'started')
misc.test_procedure()
srv_msg.client_requests_option('7')
srv_msg.client_does_include('Client', None, 'client-id')
srv_msg.client_does_include('Client', None, 'IA-NA')
srv_msg.client_send_msg('SOLICIT')
misc.pass_criteria()
srv_msg.send_wait_for_message('MUST', None, 'ADVERTISE')
srv_msg.response_check_include_option('Response', None, '3')
srv_msg.response_check_option_content('Response', '3', None, 'sub-option',
'5')
misc.test_procedure()
srv_msg.client_save_option('server-id')
srv_msg.client_save_option('IA_NA')
srv_msg.client_add_saved_option('DONT ')
srv_msg.unicast_addres(None, 'LINK_LOCAL')
srv_msg.client_does_include('Client', None, 'client-id')
srv_msg.client_send_msg('REQUEST')
misc.pass_criteria()
srv_msg.send_wait_for_message('MUST', None, 'REPLY')
srv_msg.response_check_include_option('Response', None, '13')
srv_msg.response_check_option_content('Response', '13', None, 'statuscode',
'5')
misc.test_procedure()
srv_msg.client_add_saved_option('DONT ')
srv_msg.client_does_include('Client', None, 'client-id')
srv_msg.client_send_msg('REQUEST')
misc.pass_criteria()
srv_msg.send_wait_for_message('MUST', None, 'REPLY')
srv_msg.response_check_include_option('Response', None, '3')
srv_msg.response_check_option_content('Response', '3', None, 'sub-option',
'5')
srv_msg.response_check_suboption_content('Response', '5', '3', None,
'address', '3000::1')
references.references_check('RFC3315')
def test_v6_basic_message_unicast_local_rebind():
# Server MUST discard any Rebind it receives with
# a unicast address destination.
# Message details Client Server
# SOLICIT -->
# <-- ADVERTISE
# REQUEST -->
# <-- REPLY
# LINK_LOCAL
# UNICAST dest REBIND -->
# X REPLY
# correct message REBIND -->
# <-- REPLY
# Pass Criteria:
# REPLY MUST include option:
# client-id
# server-id
# IA-NA
misc.test_setup()
srv_control.config_srv_subnet('3000::/64', '3000::1-3000::ff')
srv_control.build_and_send_config_files()
srv_control.start_srv('DHCP', 'started')
misc.test_procedure()
srv_msg.client_requests_option(7)
srv_msg.client_does_include('Client', 'client-id')
srv_msg.client_does_include('Client', 'IA-NA')
srv_msg.client_send_msg('SOLICIT')
misc.pass_criteria()
srv_msg.send_wait_for_message('MUST', 'ADVERTISE')
srv_msg.response_check_include_option(3)
srv_msg.response_check_option_content(3, 'sub-option', 5)
misc.test_procedure()
srv_msg.client_copy_option('IA_NA')
srv_msg.client_copy_option('server-id')
srv_msg.client_does_include('Client', 'client-id')
srv_msg.client_send_msg('REQUEST')
misc.pass_criteria()
srv_msg.send_wait_for_message('MUST', 'REPLY')
misc.test_procedure()
srv_msg.unicast_addres(None, 'LINK_LOCAL')
srv_msg.client_save_option('IA_NA')
srv_msg.client_add_saved_option('DONT ')
srv_msg.client_does_include('Client', 'client-id')
srv_msg.client_send_msg('REBIND')
misc.pass_criteria()
srv_msg.send_dont_wait_for_message()
misc.test_procedure()
srv_msg.client_add_saved_option(None)
srv_msg.client_does_include('Client', 'client-id')
srv_msg.client_send_msg('REBIND')
misc.pass_criteria()
srv_msg.send_wait_for_message('MUST', 'REPLY')
srv_msg.response_check_include_option(1)
srv_msg.response_check_include_option(2)
srv_msg.response_check_include_option(3)
references.references_check('RFC3315')
def test_v6_basic_message_unicast_global_release():
# Server MUST discard any RELEASE message it receives with
# a unicast address destination, and send back REPLY with
# UseMulticast status code.
#
# Message details Client Server
# SOLICIT -->
# <-- ADVERTISE
# REQUEST -->
# <-- REPLY
# GLOBAL UNICAST dest RELEASE -->
# <-- REPLY
# Pass Criteria:
# REPLY MUST include option:
# client-id
# server-id
# status-code with UseMulticast
# correct message RELEASE -->
# <-- REPLY
# Pass Criteria:
# REPLY MUST include option:
# client-id
# server-id
# status-code with Success
misc.test_setup()
# Server is configured with 3000::/64 subnet with 3000::1-3000::ff pool.
srv_control.config_srv_subnet_with_iface('$(SERVER_IFACE)',
'$(SRV_IPV6_ADDR_GLOBAL)',
'3000::/64',
'3000::1-3000::ff')
srv_control.build_and_send_config_files()
srv_control.start_srv('DHCP', 'started')
misc.test_procedure()
srv_msg.client_requests_option(7)
srv_msg.client_does_include('Client', 'client-id')
srv_msg.client_does_include('Client', 'IA-NA')
srv_msg.client_send_msg('SOLICIT')
misc.pass_criteria()
srv_msg.send_wait_for_message('MUST', 'ADVERTISE')
misc.test_procedure()
srv_msg.client_copy_option('IA_NA')
srv_msg.client_copy_option('server-id')
srv_msg.client_does_include('Client', 'client-id')
srv_msg.client_send_msg('REQUEST')
misc.pass_criteria()
srv_msg.send_wait_for_message('MUST', 'REPLY')
misc.test_procedure()
srv_msg.unicast_addres('GLOBAL', None)
srv_msg.client_save_option('IA_NA')
srv_msg.client_save_option('server-id')
srv_msg.client_add_saved_option('DONT ')
srv_msg.client_does_include('Client', 'client-id')
srv_msg.client_send_msg('RELEASE')
misc.pass_criteria()
srv_msg.send_wait_for_message('MUST', 'REPLY')
srv_msg.response_check_include_option(13)
srv_msg.response_check_option_content(13, 'statuscode', 5)
misc.test_procedure()
srv_msg.client_add_saved_option(None)
srv_msg.client_does_include('Client', 'client-id')
srv_msg.client_send_msg('RELEASE')
misc.pass_criteria()
srv_msg.send_wait_for_message('MUST', 'REPLY')
srv_msg.response_check_include_option(1)
srv_msg.response_check_include_option(2)
srv_msg.response_check_include_option(13)
references.references_check('RFC3315')
def test_v6_basic_message_unicast_local_request():
# Server MUST discard any Request message it receives with
# a unicast address destination, and send back REPLY with
# UseMulticast status code.
# In this test if it fails with 'NoAddrAvail' at the end
# it means that server has send back REPLY with UseMulticast
# status code but also assigned address.
# Message details Client Server
# SOLICIT -->
# <-- ADVERTISE
# LINK_LOCAL
# UNICAST dest REQUEST -->
# <-- REPLY
# Pass Criteria:
# REPLY MUST include option:
# client-id
# server-id
# status code option with UseMulticast
#
# SOLICIT -->
# <-- ADVERTISE
# correct message REQUEST -->
# <-- REPLY
# REPLY MUST include option:
# client-id
# server-id
# IA_NA
# IA_Address with address 3000::1.
misc.test_setup()
srv_control.config_srv_subnet('3000::/64', '3000::1-3000::1')
srv_control.build_and_send_config_files('SSH', 'config-file')
srv_control.start_srv('DHCP', 'started')
misc.test_procedure()
srv_msg.client_requests_option('7')
srv_msg.client_does_include('Client', None, 'client-id')
srv_msg.client_does_include('Client', None, 'IA-NA')
srv_msg.client_send_msg('SOLICIT')
misc.pass_criteria()
srv_msg.send_wait_for_message('MUST', None, 'ADVERTISE')
srv_msg.response_check_include_option('Response', None, '3')
srv_msg.response_check_option_content('Response', '3', None, 'sub-option', '5')
misc.test_procedure()
srv_msg.client_save_option('server-id')
srv_msg.client_save_option('IA_NA')
srv_msg.client_add_saved_option('DONT ')
srv_msg.unicast_addres(None, 'LINK_LOCAL')
srv_msg.client_does_include('Client', None, 'client-id')
srv_msg.client_send_msg('REQUEST')
misc.pass_criteria()
srv_msg.send_wait_for_message('MUST', None, 'REPLY')
srv_msg.response_check_include_option('Response', None, '13')
srv_msg.response_check_option_content('Response', '13', None, 'statuscode', '5')
misc.test_procedure()
srv_msg.client_add_saved_option('DONT ')
srv_msg.client_does_include('Client', None, 'client-id')
srv_msg.client_send_msg('REQUEST')
misc.pass_criteria()
srv_msg.send_wait_for_message('MUST', None, 'REPLY')
srv_msg.response_check_include_option('Response', None, '3')
srv_msg.response_check_option_content('Response', '3', None, 'sub-option', '5')
srv_msg.response_check_suboption_content('Response', '5', '3', None, 'address', '3000::1')
references.references_check('RFC3315')
def test_v6_basic_message_unicast_local_release():
# Server MUST discard any RELEASE message it receives with
# a unicast address destination, and send back REPLY with
# UseMulticast status code.
#
# Message details Client Server
# SOLICIT -->
# <-- ADVERTISE
# REQUEST -->
# <-- REPLY
# LINK_LOCAL
# UNICAST dest RELEASE -->
# <-- REPLY
# Pass Criteria:
# REPLY MUST include option:
# client-id
# server-id
# status-code with UseMulticast
# correct message RELEASE -->
# <-- REPLY
# Pass Criteria:
# REPLY MUST include option:
# client-id
# server-id
# status-code with Success
misc.test_setup()
srv_control.config_srv_subnet('3000::/64', '3000::1-3000::ff')
srv_control.build_and_send_config_files('SSH', 'config-file')
srv_control.start_srv('DHCP', 'started')
misc.test_procedure()
srv_msg.client_requests_option('7')
srv_msg.client_does_include('Client', None, 'client-id')
srv_msg.client_does_include('Client', None, 'IA-NA')
srv_msg.client_send_msg('SOLICIT')
misc.pass_criteria()
srv_msg.send_wait_for_message('MUST', None, 'ADVERTISE')
misc.test_procedure()
srv_msg.client_copy_option('IA_NA')
srv_msg.client_copy_option('server-id')
srv_msg.client_does_include('Client', None, 'client-id')
srv_msg.client_send_msg('REQUEST')
misc.pass_criteria()
srv_msg.send_wait_for_message('MUST', None, 'REPLY')
misc.test_procedure()
srv_msg.unicast_addres(None, 'LINK_LOCAL')
srv_msg.client_save_option('IA_NA')
srv_msg.client_save_option('server-id')
srv_msg.client_add_saved_option('DONT ')
srv_msg.client_does_include('Client', None, 'client-id')
srv_msg.client_send_msg('RELEASE')
misc.pass_criteria()
srv_msg.send_wait_for_message('MUST', None, 'REPLY')
srv_msg.response_check_include_option('Response', None, '13')
srv_msg.response_check_option_content('Response', '13', None, 'statuscode', '5')
misc.test_procedure()
srv_msg.client_add_saved_option(None)
srv_msg.client_does_include('Client', None, 'client-id')
srv_msg.client_send_msg('RELEASE')
misc.pass_criteria()
srv_msg.send_wait_for_message('MUST', None, 'REPLY')
srv_msg.response_check_include_option('Response', None, '1')
srv_msg.response_check_include_option('Response', None, '2')
srv_msg.response_check_include_option('Response', None, '13')
references.references_check('RFC3315')
def test_v6_basic_message_unicast_global_confirm():
# Server MUST discard any Confirm it receives with
# a unicast address destination
# Message details Client Server
# SOLICIT -->
# <-- ADVERTISE
# REQUEST -->
# <-- REPLY
# GLOBAL_UNICAST dest CONFIRM -->
# X REPLY
# correct message CONFIRM -->
# <-- REPLY
# Pass Criteria:
# REPLY MUST include option:
# client-id
# server-id
misc.test_setup()
# Server is configured with 3000::/64 subnet with 3000::1-3000::ff pool.
srv_control.config_srv_subnet_with_iface('$(SERVER_IFACE)',
'$(SRV_IPV6_ADDR_GLOBAL)',
'3000::/64', '3000::1-3000::ff')
srv_control.build_and_send_config_files('SSH', 'config-file')
srv_control.start_srv('DHCP', 'started')
misc.test_procedure()
srv_msg.client_requests_option('7')
srv_msg.client_does_include('Client', None, 'client-id')
srv_msg.client_does_include('Client', None, 'IA-NA')
srv_msg.client_send_msg('SOLICIT')
misc.pass_criteria()
srv_msg.send_wait_for_message('MUST', None, 'ADVERTISE')
srv_msg.response_check_include_option('Response', None, '3')
srv_msg.response_check_option_content('Response', '3', None, 'sub-option',
'5')
misc.test_procedure()
srv_msg.client_copy_option('IA_NA')
srv_msg.client_copy_option('server-id')
srv_msg.client_requests_option('7')
srv_msg.client_does_include('Client', None, 'client-id')
srv_msg.client_send_msg('REQUEST')
misc.pass_criteria()
srv_msg.send_wait_for_message('MUST', None, 'REPLY')
misc.test_procedure()
srv_msg.client_save_option('IA_NA')
srv_msg.client_add_saved_option('DONT ')
srv_msg.unicast_addres('GLOBAL', None)
srv_msg.client_does_include('Client', None, 'client-id')
srv_msg.client_send_msg('CONFIRM')
misc.pass_criteria()
srv_msg.send_dont_wait_for_message()
misc.test_procedure()
srv_msg.client_add_saved_option(None)
srv_msg.client_does_include('Client', None, 'client-id')
srv_msg.client_send_msg('CONFIRM')
misc.pass_criteria()
srv_msg.send_wait_for_message('MUST', None, 'REPLY')
srv_msg.response_check_include_option('Response', None, '1')
srv_msg.response_check_include_option('Response', None, '2')
srv_msg.response_check_include_option('Response', None, '13')
references.references_check('RFC3315')
