def doEnableSwap(self):
if self.param.runMode not in ["normal", "setup"]:
print("Operation is not supported in \"%s\" mode." %
(self.param.runMode),
file=sys.stderr)
return 1
layout = strict_hdds.get_storage_layout()
if layout is None:
print("Invalid storage layout.", file=sys.stderr)
return 1
self.param.swapManager.enableSwap(layout)
if layout.name in ["bios-ext4", "efi-ext4"]:
swapSizeStr = FmUtil.formatSize(os.path.getsize(layout.dev_swap))
print("Swap File: %s (size:%s)" % (layout.dev_swap, swapSizeStr))
elif layout.name in ["efi-bcache-btrfs", "efi-bcachefs"]:
uuid = pyudev.Device.from_device_file(
pyudev.Context(), layout.dev_swap).get("ID_FS_UUID")
swapSizeStr = FmUtil.formatSize(
FmUtil.getBlkDevSize(layout.dev_swap))
print("Swap Partition: %s (UUID:%s, size:%s)" %
(layout.dev_swap, uuid, swapSizeStr))
else:
assert False
return 0
def uninstallRescueOs(self):
if self.param.runMode not in ["normal", "setup"]:
print("Operation is not supported in \"%s\" mode." %
(self.param.runMode),
file=sys.stderr)
return 1
self.param.sysChecker.basicCheckWithOverlayContent()
layout = strict_hdds.get_storage_layout()
bbkiObj = BbkiWrapper(layout)
if not bbkiObj.isRescueOsInstalled():
print("Rescue OS is not installed.", file=sys.stderr)
return 1
with BootDirWriter(layout):
self.infoPrinter.printInfo(">> Uninstalling Rescue OS...")
robust_layer.simple_fops.rm(bbkiObj.rescue_os_spec.root_dir)
print("")
self.infoPrinter.printInfo(">> Updating boot-loader...")
bbkiObj.updateBootloaderAfterRescueOsChange()
print("")
return 0
def doHddRemove(self, devpath):
if self.param.runMode not in ["normal", "setup"]:
print("Operation is not supported in \"%s\" mode." %
(self.param.runMode),
file=sys.stderr)
return 1
layout = strict_hdds.get_storage_layout()
if layout is None:
print("Invalid storage layout.", file=sys.stderr)
return 1
if layout.name in ["bios-ext4", "efi-ext4"]:
raise Exception(
"storage layout \"%s\" does not support this operation" %
(layout.name))
elif layout.name in ["efi-btrfs", "efi-bcache-btrfs", "efi-bcachefs"]:
self.infoPrinter.printInfo(">> Removing harddisk...")
layout.remove_disk(devpath)
print("")
else:
assert False
self.param.sysUpdater.updateAfterHddAddOrRemove(
self.param.machineInfoGetter.hwInfo(), layout, BbkiWrapper())
return 0
def installRescueOs(self):
if self.param.runMode not in ["normal", "setup"]:
print("Operation is not supported in \"%s\" mode." %
(self.param.runMode),
file=sys.stderr)
return 1
self.param.sysChecker.basicCheckWithOverlayContent()
# modify dynamic config
self.infoPrinter.printInfo(">> Preparing...")
if True:
dcm = DynCfgModifier()
dcm.updateMirrors()
dcm.updateDownloadCommand()
dcm.updateParallelism(self.param.machineInfoGetter.hwInfo())
dcm.updateCcache()
print("")
# build
layout = strict_hdds.get_storage_layout()
bbkiObj = BbkiWrapper(layout)
builder = RescueCdBuilder(RescueCdBuilder.DEV_TYPE_RESCUE_OS,
self.param.tmpDirOnHdd,
self.param.machineInfoGetter.hwInfo(),
rescue_os_spec=bbkiObj.rescue_os_spec)
self.infoPrinter.printInfo(">> Downloading files...")
builder.downloadFiles()
print("")
self.infoPrinter.printInfo(">> Building Rescue OS...")
builder.buildTargetSystem("amd64")
print("")
# install
with BootDirWriter(layout):
try:
self.infoPrinter.printInfo(
">> Installing Rescue OS into /boot...")
builder.exportTargetSystem()
print("")
self.infoPrinter.printInfo(">> Updating boot-loader...")
bbkiObj.updateBootloaderAfterRescueOsChange()
print("")
except Exception:
shutil.rmtree(bbkiObj.rescue_os_spec.root_dir)
raise
return 0
def doDisableSwap(self):
if self.param.runMode not in ["normal", "setup"]:
print("Operation is not supported in \"%s\" mode." %
(self.param.runMode),
file=sys.stderr)
return 1
layout = strict_hdds.get_storage_layout()
if layout is None:
print("Invalid storage layout.", file=sys.stderr)
return 1
if layout.dev_swap is None:
return 0
self.param.swapManager.disableSwap(layout)
return 0
def stablize(self):
layout = strict_hdds.get_storage_layout()
bbkiObj = BbkiWrapper(layout)
self.infoPrinter.printInfo(">> Stablizing...")
with BootDirWriter(layout):
bbkiObj.setStable(True)
print("")
if layout.name in ["efi-btrfs", "efi-bcache-btrfs", "efi-bcachefs"]:
dstList = layout.get_pending_esp_list()
if len(dstList) > 0:
with self.infoPrinter.printInfoAndIndent(
">> Synchronizing boot partitions..."):
for dst in dstList:
self.infoPrinter.printInfo(" - %s to %s..." %
(layout.get_esp(), dst))
layout.sync_esp(dst)
print("")
def update(self, bSync, bFetchAndBuild):
if self.param.runMode in ["normal", "setup"]:
layout = strict_hdds.get_storage_layout()
else:
layout = None
bbkiObj = BbkiWrapper(layout)
pkgwh = PkgWarehouse()
overlayDb = CloudOverlayDb()
# set system to unstable status
if self.param.runMode in ["normal", "setup"]:
if bbkiObj.isStable():
with BootDirWriter(layout):
bbkiObj.setStable(False)
# modify dynamic config
self.infoPrinter.printInfo(">> Preparing...")
if True:
dcm = DynCfgModifier()
dcm.updateMirrors()
dcm.updateDownloadCommand()
dcm.updateParallelism(self.param.machineInfoGetter.hwInfo())
dcm.updateCcache()
print("")
# get build server
if BuildServerSelector.hasBuildServerCfgFile():
self.infoPrinter.printInfo(">> Selecting build server...")
buildServer = BuildServerSelector.selectBuildServer()
print("")
else:
buildServer = None
# sync up and start working
if buildServer is not None:
self.infoPrinter.printInfo(">> Synchronizing up...")
buildServer.syncUp()
buildServer.startWorking()
print("")
# do sync
if bSync:
# sync bbki repositories
with ParallelRunSequencialPrint() as prspObj:
if buildServer is not None:
startCoro = buildServer.asyncStartSshExec
waitCoro = buildServer.asyncWaitSshExec
else:
startCoro = FmUtil.asyncStartCmdExec
waitCoro = FmUtil.asyncWaitCmdExec
for repo in bbkiObj.repositories:
prspObj.add_task(
startCoro,
[
self.opSync, self.param.runMode, "sync-bbki-repo",
repo.name
],
waitCoro,
pre_func=lambda x=repo.name: self.infoPrinter.
printInfo(">> Synchronizing BBKI repository \"%s\"..."
% (x)),
post_func=lambda: print(""),
)
# FIXME: there should be no sync down after realtime network filesystem support is done
if buildServer is not None:
buildServer.syncDownDirectory(FmConst.portageDataDir)
# sync repository directories
for repoName in pkgwh.repoman.getRepositoryList():
repoDir = pkgwh.repoman.getRepoDir(repoName)
self.infoPrinter.printInfo(
">> Synchronizing repository \"%s\"..." % (repoName))
self._execAndSyncDownQuietly(buildServer,
self.opSync,
self.param.runMode,
"sync-repo",
repoName,
directory=repoDir)
print("")
# update cloud overlay db
self.infoPrinter.printInfo(
">> Synchronizing cloud overlay database...")
overlayDb.update()
print("")
# sync overlay directories
with ParallelRunSequencialPrint() as prspObj:
if buildServer is not None:
startCoro = buildServer.asyncStartSshExec
waitCoro = buildServer.asyncWaitSshExec
else:
startCoro = FmUtil.asyncStartCmdExec
waitCoro = FmUtil.asyncWaitCmdExec
for repo in pkgwh.layman.getOverlayList():
if pkgwh.layman.getOverlayType(repo) == "static":
continue
prspObj.add_task(
startCoro,
[
self.opSync, self.param.runMode, "sync-overlay",
repo
],
waitCoro,
pre_func=lambda x=repo: self.infoPrinter.printInfo(
">> Synchronizing overlay \"%s\"..." % (x)),
post_func=lambda: print(""),
)
# FIXME: there should be no sync down after realtime network filesystem support is done
if buildServer is not None:
buildServer.syncDownDirectory(FmConst.portageDataDir)
# add pre-enabled overlays
for repo, ourl in pkgwh.getPreEnableOverlays().items():
if not pkgwh.layman.isOverlayExist(repo):
self.infoPrinter.printInfo(
">> Installing overlay \"%s\"..." % repo)
vcsType = "git"
if overlayDb.hasOverlay(repo):
vcsType, ourl = overlayDb.getOverlayVcsTypeAndUrl(repo)
if ourl is None:
raise Exception("no URL for overlay %s" % repo)
if buildServer is None:
FmUtil.cmdExec(self.opSync, self.param.runMode,
"add-trusted-overlay", repo, vcsType,
ourl)
else:
buildServer.sshExec(self.opSync, "add-trusted-overlay",
repo, vcsType, ourl)
buildServer.syncDownWildcardList([
os.path.join(pkgwh.layman.getOverlayFilesDir(repo),
"***"),
pkgwh.layman.getOverlayDir(repo),
pkgwh.layman.getOverlayCfgReposFile(repo),
],
quiet=True)
print("")
# add pre-enabled overlays by pre-enabled package
for repo, data in pkgwh.getPreEnablePackages().items():
ourl = data[0]
if not pkgwh.layman.isOverlayExist(repo):
self.infoPrinter.printInfo(
">> Installing overlay \"%s\"..." % repo)
vcsType = "git"
if overlayDb.hasOverlay(repo):
vcsType, ourl = overlayDb.getOverlayVcsTypeAndUrl(repo)
if ourl is None:
raise Exception("no URL for overlay %s" % repo)
if buildServer is None:
FmUtil.cmdExec(self.opSync, self.param.runMode,
"add-transient-overlay", repo, vcsType,
ourl)
else:
buildServer.sshExec(self.opSync, self.param.runMode,
"add-transient-overlay", repo,
vcsType, ourl)
buildServer.syncDownWildcardList([
os.path.join(pkgwh.layman.getOverlayFilesDir(repo),
"***"),
pkgwh.layman.getOverlayDir(repo),
pkgwh.layman.getOverlayCfgReposFile(repo),
],
quiet=True)
print("")
# add pre-enabled packages
for repo, data in pkgwh.getPreEnablePackages().items():
tlist = [
x for x in data[1]
if not pkgwh.layman.isOverlayPackageEnabled(repo, x)
]
if tlist != []:
self.infoPrinter.printInfo(
">> Enabling packages in overlay \"%s\"..." % repo)
self._exec(buildServer, self.opSync, self.param.runMode,
"enable-overlay-package", repo, *tlist)
print("")
if buildServer is not None:
buildServer.syncDownDirectory(os.path.join(
FmConst.portageDataDir, "overlay-*"),
quiet=True)
# refresh package related stuff
self._execAndSyncDownQuietly(buildServer,
self.opSync,
self.param.runMode,
"refresh-package-related-stuff",
directory=FmConst.portageCfgDir)
# eliminate "Performing Global Updates"
self._execAndSyncDownQuietly(
buildServer,
self.opSync,
self.param.runMode,
"touch-portage-tree",
directory=FmConst.portageDbDir) # FIXME
# do fetch and build
if True:
resultFile = os.path.join(self.param.tmpDir, "result.txt")
kernelCfgRules = json.dumps(
self.param.machineInfoGetter.hwInfo().kernelCfgRules)
# install kernel, initramfs and bootloader
with BootDirWriter(layout):
self.infoPrinter.printInfo(">> Installing %s-%s..." %
(bbkiObj.get_kernel_atom().fullname,
bbkiObj.get_kernel_atom().ver))
if True:
self._exec(buildServer, self.opInstallKernel,
self.param.runMode, kernelCfgRules, resultFile)
# kernelBuilt, postfix = self._parseKernelBuildResult(self._readResultFile(buildServer, resultFile))
print("")
if buildServer is not None:
self.infoPrinter.printInfo(
">> Synchronizing down /boot, /lib/modules and /lib/firmware..."
)
buildServer.syncDownKernel()
print("")
self.infoPrinter.printInfo(">> Creating initramfs...")
if True:
if self.param.runMode in ["normal", "setup"]:
bbkiObj.installInitramfs()
else:
print(
"WARNING: Running in \"%s\" mode, do NOT create initramfs!!!"
% (self.param.runMode))
print("")
self.infoPrinter.printInfo(">> Updating boot-loader...")
if self.param.runMode in ["normal", "setup"]:
bbkiObj.updateBootloader()
else:
print(
"WARNING: Running in \"%s\" mode, do NOT maniplate boot-loader!!!"
% (self.param.runMode))
print("")
# synchronize boot partitions
if layout.name in [
"efi-btrfs", "efi-bcache-btrfs", "efi-bcachefs"
]:
dstList = layout.get_pending_esp_list()
if len(dstList) > 0:
with self.infoPrinter.printInfoAndIndent(
">> Synchronizing boot partitions..."):
for dst in dstList:
self.infoPrinter.printInfo(
" - %s to %s..." %
(layout.get_esp(), dst))
layout.sync_esp(dst)
print("")
# emerge @world
self.infoPrinter.printInfo(">> Updating @world...")
if buildServer is not None:
try:
buildServer.sshExec(self.opEmergeWorld)
finally:
self.infoPrinter.printInfo(
">> Synchronizing down system files...")
buildServer.syncDownSystem()
print("")
else:
FmUtil.cmdExec(self.opEmergeWorld)
# re-emerge all "-9999" packages
self.infoPrinter.printInfo(">> Updating all \"-9999\" packages...")
if buildServer is not None:
try:
buildServer.sshExec(self.opEmerge9999)
finally:
self.infoPrinter.printInfo(
">> Synchronizing down system files...")
buildServer.syncDownSystem()
print("")
else:
FmUtil.cmdExec(self.opEmerge9999)
# end remote build
if buildServer is not None:
buildServer.dispose()
def clean(self, bPretend):
# modify dynamic config
self.infoPrinter.printInfo(">> Preparing...")
if True:
dcm = DynCfgModifier()
dcm.updateMirrors()
dcm.updateDownloadCommand()
dcm.updateParallelism(self.param.machineInfoGetter.hwInfo())
dcm.updateCcache()
print("")
# get build server
if BuildServerSelector.hasBuildServerCfgFile():
self.infoPrinter.printInfo(">> Selecting build server...")
buildServer = BuildServerSelector.selectBuildServer()
print("")
else:
buildServer = None
# sync up and start working
if buildServer is not None:
self.infoPrinter.printInfo(">> Synchronizing up...")
buildServer.syncUp()
buildServer.startWorking()
print("")
# clean old kernel files
self.infoPrinter.printInfo(">> Removing old kernel files...")
if True:
if self.param.runMode in ["normal", "setup"]:
layout = strict_hdds.get_storage_layout()
else:
layout = None
bbkiObj = BbkiWrapper(layout)
resultFile = os.path.join(self.param.tmpDir, "result.txt")
bFileRemoved = False
with BootDirWriter(layout):
self._exec(buildServer, self.opCleanKernel,
"%s %d" % (self.param.runMode, bPretend),
resultFile)
if buildServer is None:
with open(resultFile, "r", encoding="iso8859-1") as f:
data = f.read()
else:
data = buildServer.getFile(resultFile).decode("iso8859-1")
bFileRemoved = self._parseKernelCleanResult(data)
print("")
if bFileRemoved:
if buildServer is not None:
self.infoPrinter.printInfo(
">> Synchronizing down /boot, /lib/modules and /lib/firmware..."
)
buildServer.syncDownKernel()
print("")
self.infoPrinter.printInfo(">> Updating boot-loader...")
if self.param.runMode in ["normal", "setup"]:
bbkiObj.updateBootloaderAfterCleaning()
else:
print(
"WARNING: Running in \"%s\" mode, do NOT maniplate boot-loader!!!"
% (self.param.runMode))
print("")
if layout is not None and layout.name in [
"efi-btrfs", "efi-bcache-btrfs", "efi-bcachefs"
]:
dstList = layout.get_pending_esp_list()
if bFileRemoved and len(dstList) > 0:
with self.infoPrinter.printInfoAndIndent(
">> Synchronizing boot partitions..."):
for dst in dstList:
self.infoPrinter.printInfo(
" - %s to %s..." %
(layout.get_esp(), dst))
layout.sync_esp(dst)
print("")
# clean kcache
self.infoPrinter.printInfo(">> Cleaning %s..." % (FmConst.kcacheDir))
self._execAndSyncDownQuietly(buildServer,
self.opCleanKcache,
"%s %d" % (self.param.runMode, bPretend),
directory=FmConst.kcacheDir)
print("")
# clean not-used packages and USE flags
self.infoPrinter.printInfo(">> Cleaning packages...")
self._exec(buildServer, self.opCleanPkgAndUse, "%d" % (bPretend))
print("")
# sync down system files
if not bPretend and buildServer is not None:
self.infoPrinter.printInfo(">> Synchronizing down system files...")
buildServer.syncDownSystem()
print("")
# clean distfiles
# sync down distfiles directory quietly since there's only deletion
self.infoPrinter.printInfo(">> Cleaning %s..." % (FmConst.distDir))
self._execAndSyncDownQuietly(buildServer,
"eclean-dist",
directory=FmConst.distDir)
print("")
# end remote build
if buildServer is not None:
buildServer.dispose()
def doShow(self):
'''
>>> Example:
System status: unstable
Hardware:
Unknown hardware
Boot mode:
UEFI
Main OS:
Linux (kernel-x86_64-4.4.6)
Rescue OS:
Installed
Auxillary OSes:
None
Storage layout:
Name: efi-bcache-lvm
ESP partition: /dev/sdc1
Swap partition: /dev/sdc2 (16.0GiB)
Cache partition: /dev/sdc3 (102.7GiB)
LVM PVs: /dev/sda,bcache0 /dev/sdb,bcache16 (total: 8.2TiB)
Swap:
Disabled
Logging:
To harddisk (/var/log)
Backend graphics devices:
/dev/dri/card1 /dev/dri/card2 (total: 16GiB 14.3TFLOPs)
System users: root, nobody
System groups: root, nobody, nogroup, wheel, users
Repositories:
fpemud-overlay [Dirty] (Last Update: 2016-01-01 00:00:00)
local [Not Exist]
Overlays:
wrobel [Subversion] (https://overlays.gentoo.org/svn/dev/wrobel )
Selected packages:
app-admin/ansible (repo-gentoo)
app-misc/sway (overlay-uly55e5)
'''
if self.param.runMode != "normal":
print("WARNING: Running in \"%s\" mode!!!" % (self.param.runMode))
print("")
self.param.sysChecker.basicCheckWithOverlayContent()
if self.param.runMode in ["normal", "setup"]:
layout = strict_hdds.get_storage_layout()
bbkiObj = BbkiWrapper(layout)
s = "System status: "
if bbkiObj.isStable():
s += "stable"
else:
s += "unstable"
print(s)
print("")
print("Hardware:")
hwInfo = self.param.machineInfoGetter.hwInfo()
if isinstance(hwInfo, HwInfoPcBranded):
print(" %s %s" % (hwInfo.vendor, hwInfo.model))
elif isinstance(hwInfo, HwInfoPcAssembled):
print(" DIY PC")
else:
assert False
print("")
if True:
print("Main OS:")
be = bbkiObj.get_pending_boot_entry()
if be is None:
be = "None"
else:
be = "Linux (%s)" % (be.postfix)
print(" %s" % (be))
print("Rescue OS:")
if bbkiObj.isRescueOsInstalled():
print(" Installed")
else:
print(" Not installed")
auxOsInfo = bbkiObj.getAuxOsInfo()
if len(auxOsInfo) > 0:
print("Auxillary OSes:")
for item in auxOsInfo:
sys.stdout.write(" %s:" % (item.name))
for i in range(0, 20 - len(item.name)):
sys.stdout.write(" ")
print(item.partition_path)
print("")
if True:
def __partSize(devpath):
sz = FmUtil.getBlkDevSize(devpath)
return FmUtil.formatSize(sz)
print("Boot mode:")
if layout.boot_mode == strict_hdds.StorageLayout.BOOT_MODE_EFI:
print(" UEFI")
elif layout.boot_mode == strict_hdds.StorageLayout.BOOT_MODE_BIOS:
print(" BIOS")
else:
assert False
print("Storage layout:")
print(" Name: %s" % (layout.name))
print(" State: ready")
if layout.name == "bios-ext4":
print(" Boot disk: %s" % (layout.boot_disk))
print(" Root partititon: %s (%s)" %
(layout.dev_rootfs, __partSize(layout.dev_rootfs)))
elif layout.name == "efi-ext4":
print(" Boot disk: %s" % (layout.boot_disk))
print(" Root partititon: %s (%s)" %
(layout.dev_rootfs, __partSize(layout.dev_rootfs)))
elif layout.name in ["efi-btrfs"]:
print(" Boot disk: %s" % (layout.boot_disk))
totalSize = 0
pvStrList = []
for hddDevPath in layout.get_hdd_list():
parti = layout.get_hdd_data_partition(hddDevPath)
pvStrList.append("%s" % (parti))
totalSize += FmUtil.getBlkDevSize(parti)
print(" HDDs: %s (total: %s)" %
(" ".join(pvStrList), FmUtil.formatSize(totalSize)))
elif layout.name == "efi-bcache-btrfs":
if layout.get_ssd() is not None:
print(" SSD: %s (boot disk)" % (layout.get_ssd()))
if layout.get_ssd_swap_partition() is not None:
print(
" Swap partition: %s (%s)" %
(layout.get_ssd_swap_partition(),
__partSize(layout.get_ssd_swap_partition())))
else:
print(" Swap partition: None")
print(" Cache partition: %s (%s)" %
(layout.get_ssd_cache_partition(),
__partSize(layout.get_ssd_cache_partition())))
else:
print(" SSD: None")
print(" Boot disk: %s" % (layout.boot_disk))
totalSize = 0
pvStrList = []
for hddDevPath in layout.get_hdd_list():
bcacheDevPath = layout.get_hdd_bcache_dev(hddDevPath)
pvStrList.append(
"%s,%s" %
(hddDevPath, bcacheDevPath.replace("/dev/", "")))
totalSize += FmUtil.getBlkDevSize(bcacheDevPath)
print(" HDDs: %s (total: %s)" %
(" ".join(pvStrList), FmUtil.formatSize(totalSize)))
elif layout.name == "efi-bcachefs":
if layout.get_ssd() is not None:
print(" SSD: %s (boot disk)" % (layout.get_ssd()))
if layout.get_ssd_swap_partition() is not None:
print(
" Swap partition: %s (%s)" %
(layout.get_ssd_swap_partition(),
__partSize(layout.get_ssd_swap_partition())))
else:
print(" Swap partition: None")
print(" Cache partition: %s (%s)" %
(layout.get_ssd_cache_partition(),
__partSize(layout.get_ssd_cache_partition())))
else:
print(" SSD: None")
print(" Boot disk: %s" % (layout.boot_disk))
totalSize = 0
pvStrList = []
for hddDevPath in layout.get_hdd_list():
parti = layout.get_hdd_data_partition(hddDevPath)
pvStrList.append("%s" % (parti))
totalSize += FmUtil.getBlkDevSize(parti)
print(" HDDs: %s (total: %s)" %
(" ".join(pvStrList), FmUtil.formatSize(totalSize)))
else:
assert False
print("Swap:")
if self.param.runMode == "normal":
if layout.dev_swap is None:
print(" Disabled")
else:
serviceName = FmUtil.systemdFindSwapServiceInDirectory(
"/etc/systemd/system", layout.dev_swap)
if serviceName is None or not FmUtil.systemdIsServiceEnabled(
serviceName):
print(" Disabled")
else:
print(" Enabled (%s)" %
(FmUtil.formatSize(layout.get_swap_size())))
elif self.param.runMode == "setup":
print(" Disabled")
else:
assert False
# FIXME
print("Logging:")
if True:
print(" To harddisk (/var/log)")
print("")
if True:
ret = FmUtil.findBackendGraphicsDevices()
if len(ret) > 0:
totalMem = 0
totalFlopsForFp32 = 0
for path in ret:
rc = FmUtil.getVendorIdAndDeviceIdByDevNode(path)
if rc is None:
totalMem = None
break
info = DevHwInfoDb.getDevHwInfo(rc[0], rc[1])
if info is None:
totalMem = None
break
if "mem" not in info or not isinstance(
info["mem"], int):
totalMem = None
break
if "fp32" not in info or not isinstance(
info["fp32"], int):
totalMem = None
break
totalMem += info["mem"]
totalFlopsForFp32 += info["fp32"]
totalStr = "unknown"
if totalMem is not None:
totalStr = "%s %s" % (FmUtil.formatSize(
totalMem), FmUtil.formatFlops(totalFlopsForFp32))
print("Backend graphics devices:")
print(" %s (total: %s)" % (" ".join(ret), totalStr))
print("")
elif self.param.runMode == "prepare":
bbkiObj = BbkiWrapper(None)
print("Main OS:")
be = bbkiObj.get_newest_boot_entry()
if be is None:
be = "None"
else:
be = "Linux (%s)" % (be.postfix)
print(" %s" % (be))
print("")
else:
assert False
with strict_pgs.PasswdGroupShadow() as pgs:
print("System users: %s" %
(", ".join(pgs.getSystemUserList())))
print("System groups: %s" %
(", ".join(pgs.getSystemGroupList())))
print("")
print("Repositories:")
repoman = EbuildRepositories()
repoList = repoman.getRepositoryList()
if len(repoList) > 0:
maxLen = FmUtil.strListMaxLen(repoList)
for repoName in repoList:
s1 = FmUtil.pad(repoName, maxLen)
if repoman.isRepoExist(repoName):
print(" %s [Good ] Last Update: %s" %
(s1,
FmUtil.getDirLastUpdateTime(
repoman.getRepoDir(repoName))))
else:
print(" %s [Not Exist]" % (s1))
else:
print(" None")
print("")
print("Overlays:")
layman = EbuildOverlays()
overlayList = layman.getOverlayList()
if len(overlayList) > 0:
tlist2 = []
tlist3 = []
for lname in overlayList:
if layman.getOverlayType(lname) == "static":
ltype = "Static"
lurl = ""
else:
ltype, lurl = layman.getOverlayVcsTypeAndUrl(lname)
if ltype == "git":
ltype = "Git"
elif ltype == "svn":
ltype = "Subversion"
else:
assert False
tlist2.append(ltype)
tlist3.append(lurl)
maxLen1 = FmUtil.strListMaxLen(overlayList)
maxLen2 = FmUtil.strListMaxLen(tlist2)
maxLen3 = FmUtil.strListMaxLen(tlist3)
for i in range(0, len(overlayList)):
s1 = FmUtil.pad(overlayList[i], maxLen1)
s2 = FmUtil.pad(tlist2[i], maxLen2)
s3 = FmUtil.pad(tlist3[i], maxLen3)
print(" %s [%s %s] Last Update: %s" %
(s1, s2, s3,
FmUtil.getDirLastUpdateTime(
layman.getOverlayDir(overlayList[i]))))
else:
print(" None")
print("")
print("Selected packages:")
if True:
pkgList = FmUtil.portageReadWorldFile(FmConst.worldFile)
maxLen = max([len(x) for x in pkgList])
for repoName in repoman.getRepositoryList():
tempList = []
for pkg in pkgList:
if os.path.exists(
os.path.join(repoman.getRepoDir(repoName), pkg)):
print(" %s (repo-%s)" %
(FmUtil.pad(pkg, maxLen), repoName))
else:
tempList.append(pkg)
pkgList = tempList
for overlayName in layman.getOverlayList():
tempList = []
for pkg in pkgList:
if os.path.exists(
os.path.join(layman.getOverlayDir(overlayName),
pkg)):
print(" %s (overlay-%s)" %
(FmUtil.pad(pkg, maxLen), overlayName))
else:
tempList.append(pkg)
pkgList = tempList
for pkg in pkgList:
print(" %s" % (pkg))
return 0
import strict_hdds
sys.path.append('/usr/lib64/fpemud-os-sysman')
from helper_bbki import BbkiWrapper
from helper_pkg_warehouse import PkgWarehouse
from helper_pkg_warehouse import EbuildRepositories
from helper_pkg_warehouse import EbuildOverlays
from helper_pkg_merger import PkgMerger
runMode = sys.argv[1]
item = sys.argv[2]
if item == "sync-bbki-repo":
repoName = sys.argv[3]
assert repoName == "main"
if runMode in ["normal", "setup"]:
layout = strict_hdds.get_storage_layout()
else:
layout = None
repo = BbkiWrapper(layout).repositories[0]
repo.sync()
sys.exit(0)
if item == "sync-repo":
repoName = sys.argv[3]
repoman = EbuildRepositories()
repoman.syncRepository(repoName)
sys.exit(0)
if item == "sync-overlay":
overlayName = sys.argv[3]
EbuildOverlays().syncOverlay(overlayName)