def shift(input_file, output_file, shift_by, shift_start, shift_end,
multiplier):
"""Shift all lines in a script by defined amount and/or change speed.
\b
You can use one of the following formats to specify the time for shift:
- "1.5s" or just "1.5" means 1 second 500 milliseconds
- "150ms" means 150 milliseconds
- "1:7:12.55" means 1 hour, 7 minutes, 12 seconds and 550 milliseconds. All parts are optional.
Every format allows a negative sign before the value, which means "shift back", like "-12s"
\b
Optionally, specify multiplier to change speed:
- 1.2 makes subs 20% faster
- 7/8 makes subs 12.5% slower
\b
To shift both start end end time by one minute and 15 seconds:
$ prass shift input.ass --by 1:15 -o output.ass
To shift only start time by half a second back:
$ prass shift input.ass --start --by -0.5s -o output.ass
"""
if not shift_start and not shift_end:
shift_start = shift_end = True
shift_ms = parse_shift_string(shift_by)
multiplier = parse_fps_string(multiplier)
if multiplier < 0:
raise PrassError('Speed multiplier should be a positive number')
script = AssScript.from_ass_stream(input_file)
script.shift(shift_ms, shift_start, shift_end, multiplier)
script.to_ass_stream(output_file)
def copy_styles(dst_file, src_file, output_file, clean, resample, forced_resolution):
"""Copy styles from one ASS script to another, write the result as a third script.
You always have to provide the "from" argument, "to" defaults to stdin and "output" defaults to stdout.
\b
Simple usage:
$ prass copy-styles --from template.ass --to unstyled.ass -o styled.ass
With pipes:
$ cat unstyled.ass | prass copy-styles --from template.ass | prass cleanup --comments -o out.ass
"""
src_script = AssScript.from_ass_stream(src_file)
dst_script = AssScript.from_ass_stream(dst_file)
if forced_resolution:
forced_resolution = parse_resolution_string(forced_resolution)
dst_script.append_styles(src_script, clean, resample, forced_resolution)
dst_script.to_ass_stream(output_file)
def copy_styles(dst_file, src_file, output_file, clean, resample, forced_resolution):
"""Copy styles from one ASS script to another, write the result as a third script.
You always have to provide the "from" argument, "to" defaults to stdin and "output" defaults to stdout.
\b
Simple usage:
$ prass copy-styles --from template.ass --to unstyled.ass -o styled.ass
With pipes:
$ cat unstyled.ass | prass copy-styles --from template.ass | prass cleanup --comments -o out.ass
"""
src_script = AssScript.from_ass_stream(src_file)
dst_script = AssScript.from_ass_stream(dst_file)
if forced_resolution:
forced_resolution = parse_resolution_string(forced_resolution)
dst_script.append_styles(src_script, clean, resample, forced_resolution)
dst_script.to_ass_stream(output_file)
def tpp(input_file, output_file, styles, lead_in, lead_out, max_overlap,
max_gap, adjacent_bias, keyframes_path, timecodes_path, fps,
kf_before_start, kf_after_start, kf_before_end, kf_after_end):
"""Timing post-processor.
It's a pretty straightforward port from Aegisub so you should be familiar with it.
You have to specify keyframes and timecodes (either as a CFR value or a timecodes file) if you want keyframe snapping.
All parameters default to zero so if you don't want something - just don't put it in the command line.
\b
To add lead-in and lead-out:
$ prass tpp input.ass --lead-in 50 --lead-out 150 -o output.ass
To make adjacent lines continuous, with 80% bias to changing end time of the first line:
$ prass tpp input.ass --overlap 50 --gap 200 --bias 80 -o output.ass
To snap events to keyframes without a timecodes file:
$ prass tpp input.ass --keyframes kfs.txt --fps 23.976 --kf-before-end 150 --kf-after-end 150 --kf-before-start 150 --kf-after-start 150 -o output.ass
"""
if fps and timecodes_path:
raise PrassError(
'Timecodes file and fps cannot be specified at the same time')
if fps:
timecodes = Timecodes.cfr(parse_fps_string(fps))
elif timecodes_path:
timecodes = Timecodes.from_file(timecodes_path)
elif any((kf_before_start, kf_after_start, kf_before_end, kf_after_end)):
raise PrassError(
'You have to provide either fps or timecodes file for keyframes processing'
)
else:
timecodes = None
if timecodes and not keyframes_path:
raise PrassError(
'You have to specify keyframes file for keyframes processing')
keyframes_list = parse_keyframes(
keyframes_path) if keyframes_path else None
actual_styles = []
for style in styles:
actual_styles.extend(x.strip() for x in style.split(','))
script = AssScript.from_ass_stream(input_file)
script.tpp(actual_styles, lead_in, lead_out, max_overlap, max_gap,
adjacent_bias, keyframes_list, timecodes, kf_before_start,
kf_after_start, kf_before_end, kf_after_end)
script.to_ass_stream(output_file)
def cleanup(input_file, output_file, drop_comments, drop_empty_lines, drop_unused_styles,
drop_actors, drop_effects, drop_spacing, drop_sections):
"""Remove junk data from ASS script
\b
To remove commented and empty lines plus clear unused styles:
$ prass cleanup input.ass --comments --empty-lines --styles output.ass
"""
sections_map = {
"fonts": "[Fonts]",
"graphics": "[Graphics]",
"aegi": "[Aegisub Project Garbage]",
"extradata": "[Aegisub Extradata]"
}
drop_sections = [sections_map[x] for x in drop_sections]
script = AssScript.from_ass_stream(input_file)
script.cleanup(drop_comments, drop_empty_lines, drop_unused_styles, drop_actors, drop_effects, drop_spacing, drop_sections)
script.to_ass_stream(output_file)
def cleanup(input_file, output_file, drop_comments, drop_empty_lines, drop_unused_styles,
drop_actors, drop_effects, drop_spacing, drop_sections):
"""Remove junk data from ASS script
\b
To remove commented and empty lines plus clear unused styles:
$ prass cleanup input.ass --comments --empty-lines --styles output.ass
"""
sections_map = {
"fonts": "[Fonts]",
"graphics": "[Graphics]",
"aegi": "[Aegisub Project Garbage]",
"extradata": "[Aegisub Extradata]"
}
drop_sections = [sections_map[x] for x in drop_sections]
script = AssScript.from_ass_stream(input_file)
script.cleanup(drop_comments, drop_empty_lines, drop_unused_styles, drop_actors, drop_effects, drop_spacing, drop_sections)
script.to_ass_stream(output_file)
def tpp(input_file, output_file, styles, lead_in, lead_out, max_overlap, max_gap, adjacent_bias,
keyframes_path, timecodes_path, fps, kf_before_start, kf_after_start, kf_before_end, kf_after_end):
"""Timing post-processor.
It's a pretty straightforward port from Aegisub so you should be familiar with it.
You have to specify keyframes and timecodes (either as a CFR value or a timecodes file) if you want keyframe snapping.
All parameters default to zero so if you don't want something - just don't put it in the command line.
\b
To add lead-in and lead-out:
$ prass tpp input.ass --lead-in 50 --lead-out 150 -o output.ass
To make adjacent lines continuous, with 80% bias to changing end time of the first line:
$ prass tpp input.ass --overlap 50 --gap 200 --bias 80 -o output.ass
To snap events to keyframes without a timecodes file:
$ prass tpp input.ass --keyframes kfs.txt --fps 23.976 --kf-before-end 150 --kf-after-end 150 --kf-before-start 150 --kf-after-start 150 -o output.ass
"""
if fps and timecodes_path:
raise PrassError('Timecodes file and fps cannot be specified at the same time')
if fps:
timecodes = Timecodes.cfr(parse_fps_string(fps))
elif timecodes_path:
timecodes = Timecodes.from_file(timecodes_path)
elif any((kf_before_start, kf_after_start, kf_before_end, kf_after_end)):
raise PrassError('You have to provide either fps or timecodes file for keyframes processing')
else:
timecodes = None
if timecodes and not keyframes_path:
raise PrassError('You have to specify keyframes file for keyframes processing')
keyframes_list = parse_keyframes(keyframes_path) if keyframes_path else None
actual_styles = []
for style in styles:
actual_styles.extend(x.strip() for x in style.split(','))
script = AssScript.from_ass_stream(input_file)
script.tpp(actual_styles, lead_in, lead_out, max_overlap, max_gap, adjacent_bias,
keyframes_list, timecodes, kf_before_start, kf_after_start, kf_before_end, kf_after_end)
script.to_ass_stream(output_file)
def sort_script(input_file, output_file, sort_by, descending):
"""Sort script by one or more parameters.
\b
Sorting by time:
$ prass sort input.ass --by time -o output.ass
Sorting by time and then by layer, both in descending order:
$ prass sort input.ass --by time --by layer --desc -o output.ass
"""
script = AssScript.from_ass_stream(input_file)
attrs_map = {
"start": "start",
"time": "start",
"end": "end",
"style": "style",
"actor": "actor",
"effect": "effect",
"layer": "layer"
}
getter = attrgetter(*[attrs_map[x] for x in sort_by])
script.sort_events(getter, descending)
script.to_ass_stream(output_file)
def shift(input_file, output_file, shift_by, shift_start, shift_end):
"""Shift all lines in a script by defined amount.
\b
You can use one of the following formats to specify the time:
- "1.5s" or just "1.5" means 1 second 500 milliseconds
- "150ms" means 150 milliseconds
- "1:7:12.55" means 1 hour, 7 minutes, 12 seconds and 550 milliseconds. All parts are optional.
Every format allows a negative sign before the value, which means "shift back", like "-12s"
\b
To shift both start end end time by one minute and 15 seconds:
$ prass shift input.ass --by 1:15 -o output.ass
To shift only start time by half a second back:
$ prass shift input.ass --start --by -0.5s -o output.ass
"""
if not shift_start and not shift_end:
shift_start = shift_end = True
shift_ms = parse_shift_string(shift_by)
script = AssScript.from_ass_stream(input_file)
script.shift(shift_ms, shift_start, shift_end)
script.to_ass_stream(output_file)
def sort_script(input_file, output_file, sort_by, descending):
"""Sort script by one or more parameters.
\b
Sorting by time:
$ prass sort input.ass --by time -o output.ass
Sorting by time and then by layer, both in descending order:
$ prass sort input.ass --by time --by layer --desc -o output.ass
"""
script = AssScript.from_ass_stream(input_file)
attrs_map = {
"start": "start",
"time": "start",
"end": "end",
"style": "style",
"actor": "actor",
"effect": "effect",
"layer": "layer"
}
getter = attrgetter(*[attrs_map[x] for x in sort_by])
script.sort_events(getter, descending)
script.to_ass_stream(output_file)
