def initValues(self):
self.objs = None
self.dir = Vector(0.0,0.0,1.0)
self.r = 0.0
self.face = None
self.selObj = Geometry.getSelectedObj()
if not self.selObj:
msg = Translator.translate("At least 1 surface must be selected (Any selected object)")
App.Console.PrintError(msg)
return True
self.face = Geometry.getFaces()
if not self.face:
msg = Translator.translate("At least 1 surface must be selected (Any face object found into selected objects)")
App.Console.PrintError(msg)
return True
bound = self.face[0].BoundBox
self.bound = [bound.XMin, bound.XMax, bound.YMin, bound.YMax, bound.ZMin, bound.ZMax]
for i in range(1,len(self.face)):
face = self.face[i]
bound = face.BoundBox
self.bound[0] = min(self.bound[0],bound.XMin)
self.bound[1] = min(self.bound[1],bound.XMax)
self.bound[2] = min(self.bound[2],bound.YMin)
self.bound[3] = min(self.bound[3],bound.YMax)
self.bound[4] = min(self.bound[4],bound.ZMin)
self.bound[5] = min(self.bound[5],bound.ZMax)
self.r = max(self.r, self.bound[4])
self.r = min(self.r, self.bound[5])
msg = Translator.translate("Ready to work")
App.Console.PrintMessage(msg)
return False
def initValues(self):
""" Setup initial values. """
# Objects to work
self.objs = Gui.Selection.getSelection()
if not self.objs:
msg = Translator.translate("4 connected edges and at least 1 surface must be selected (Any object has been selected)")
App.Console.PrintError(msg)
return True
if len(self.objs) < 5:
msg = Translator.translate("4 connected edges and at least 1 surface must be selected (Less than 5 objects selected)")
App.Console.PrintError(msg)
return True
# Separate edge objects and face objects to work with them separately.
if self.getEdgesFaces():
return True
# Ensure that closed edges given
if not self.isClosed():
return True
# Sort edges (as connect chain)
if self.sortEdges():
return True
# First surface draft
if self.getPoints():
return True
if self.createSurface():
return True
# On screen data
self.preview = Preview.Preview(self.edges[0],self.edges[1])
msg = Translator.translate("Ready to work\n")
App.Console.PrintMessage(msg)
return False
def retranslateUi(self):
""" Set user interface locale strings.
"""
self.form.setWindowTitle(Translator.translate("Convert to 4 side surface"))
nUString = Translator.translate("Points at U")
self.form.findChild(QtGui.QLabel, "nULabel").setText("<font color=#0000ff>" + nUString + "</font>")
nVString = Translator.translate("Points at V2")
self.form.findChild(QtGui.QLabel, "nVLabel").setText("<font color=#ff0000>" + nVString + "</font>")
self.form.findChild(QtGui.QLabel, "degLabel").setText(Translator.translate("Surface degree"))
def selectDirection(self):
self.dirId = self.form.direction.currentIndex()
self.obj = self.preview.update(self.surf, self.dirId, self.uv)
if not self.obj:
msg = Translator.translate(
"Can't get the curve from selected object")
App.Console.PrintWarning(msg)
class SurfWorkbench ( Workbench ):
""" @brief Workbench of Ship design module. Here toolbars & icons are append. """
from surfUtils import Paths, Translator
import SurfGui
Icon = Paths.iconsPath() + "/Ico.png"
MenuText = str(Translator.translate("Surface tools"))
ToolTip = str(Translator.translate("Surface tools"))
def Initialize(self):
# ToolBar
list = ["Surf_IsoCurve", "Surf_SliceCurve", "Surf_Border", "Surf_Convert"]
self.appendToolbar("Surface tools",list)
# Menu
list = ["Surf_IsoCurve", "Surf_SliceCurve", "Surf_Border", "Surf_Convert"]
self.appendMenu("Surface tools",list)
def initValues(self):
self.obj = None
self.dirId = 0
self.uv = 0
self.surf = None
self.selObj = Geometry.getSelectedObj()
if not self.selObj:
msg = Translator.translate("1 surface must be selected (Any object has been selected)")
App.Console.PrintError(msg)
return True
self.surf = Geometry.getSelectedSurface()
if not self.surf:
msg = Translator.translate("1 surface must be selected (Any face object found into selected objects)")
App.Console.PrintError(msg)
return True
msg = Translator.translate("Ready to work")
App.Console.PrintMessage(msg)
return False
def setUV(self, uv):
self.form.uv.setValue(uv*self.form.uv.maximum())
self.form.uvText.setValue(uv)
self.uv = uv
if not self.surf:
return
self.obj = self.preview.update(self.surf, self.dirId, self.uv)
if not self.obj:
msg = Translator.translate("Can't get the curve from selected object")
App.Console.PrintWarning(msg)
def setUV(self, uv):
self.form.uv.setValue(uv * self.form.uv.maximum())
self.form.uvText.setValue(uv)
self.uv = uv
if not self.surf:
return
self.obj = self.preview.update(self.surf, self.dirId, self.uv)
if not self.obj:
msg = Translator.translate(
"Can't get the curve from selected object")
App.Console.PrintWarning(msg)
def setR(self, r):
self.form.rText.setValue(r)
self.r = max(self.form.rText.minimum(), min(self.form.rText.maximum(), r))
dr = self.form.rText.maximum()-self.form.rText.minimum()
r = (r - self.form.rText.minimum())/dr*self.form.r.maximum()
self.form.r.setValue(r)
if not self.face:
return
self.objs = self.preview.update(self.face, self.dir, self.r)
if not self.objs:
msg = Translator.translate("Can't calculate section")
App.Console.PrintWarning(msg)
def initValues(self):
self.obj = None
self.dirId = 0
self.uv = 0
self.surf = None
self.selObj = Geometry.getSelectedObj()
if not self.selObj:
msg = Translator.translate(
"1 surface must be selected (Any object has been selected)")
App.Console.PrintError(msg)
return True
self.surf = Geometry.getSelectedSurface()
if not self.surf:
msg = Translator.translate(
"1 surface must be selected (Any face object found into selected objects)"
)
App.Console.PrintError(msg)
return True
msg = Translator.translate("Ready to work")
App.Console.PrintMessage(msg)
return False
def setR(self, r):
self.form.rText.setValue(r)
self.r = max(self.form.rText.minimum(),
min(self.form.rText.maximum(), r))
dr = self.form.rText.maximum() - self.form.rText.minimum()
r = (r - self.form.rText.minimum()) / dr * self.form.r.maximum()
self.form.r.setValue(r)
if not self.face:
return
self.objs = self.preview.update(self.face, self.dir, self.r)
if not self.objs:
msg = Translator.translate("Can't calculate section")
App.Console.PrintWarning(msg)
def initValues(self):
self.objs = None
self.dir = Vector(0.0, 0.0, 1.0)
self.r = 0.0
self.face = None
self.selObj = Geometry.getSelectedObj()
if not self.selObj:
msg = Translator.translate(
"At least 1 surface must be selected (Any selected object)")
App.Console.PrintError(msg)
return True
self.face = Geometry.getFaces()
if not self.face:
msg = Translator.translate(
"At least 1 surface must be selected (Any face object found into selected objects)"
)
App.Console.PrintError(msg)
return True
bound = self.face[0].BoundBox
self.bound = [
bound.XMin, bound.XMax, bound.YMin, bound.YMax, bound.ZMin,
bound.ZMax
]
for i in range(1, len(self.face)):
face = self.face[i]
bound = face.BoundBox
self.bound[0] = min(self.bound[0], bound.XMin)
self.bound[1] = min(self.bound[1], bound.XMax)
self.bound[2] = min(self.bound[2], bound.YMin)
self.bound[3] = min(self.bound[3], bound.YMax)
self.bound[4] = min(self.bound[4], bound.ZMin)
self.bound[5] = min(self.bound[5], bound.ZMax)
self.r = max(self.r, self.bound[4])
self.r = min(self.r, self.bound[5])
msg = Translator.translate("Ready to work")
App.Console.PrintMessage(msg)
return False
def getEdgesFaces(self):
""" Returns two arrays filled with the edges and faces selected.
@return True if error happens. False otherwise
"""
self.edges = []
self.faces = []
for i in range(0,len(self.objs)):
objFaces = Geometry.getFaces(self.objs[i])
if not objFaces:
objEdges = Geometry.getEdges([self.objs[i]])
if not objEdges:
msg = Translator.translate("4 connected edges and at least 1 surface must be selected (Any edge found)")
App.Console.PrintError(msg)
return True
for j in range(0, len(objEdges)):
self.edges.append(objEdges[j])
else:
for j in range(0, len(objFaces)):
self.faces.append(objFaces[j])
if len(self.edges) != 4:
msg = Translator.translate("4 connected edges and at least 1 surface must be selected (More/less edges not allowed)")
App.Console.PrintError(msg)
return True
return False
def load():
""" Loads the tool. Getting the border don't require any
option, so can be executed directly without any task panel. """
edges = Geometry.getBorders()
if not edges:
wrn = Translator.translate("Can't get any edge from selected objects")
FreeCAD.Console.PrintWarning(wrn)
return
obj = edges[0]
for i in range(0,len(edges)):
obj = obj.oldFuse(edges[i])
Part.show(obj)
objs = FreeCAD.ActiveDocument.Objects
obj = objs[len(objs)-1]
obj.Label = 'Border'
def load():
""" Loads the tool. Getting the border don't require any
option, so can be executed directly without any task panel. """
edges = Geometry.getBorders()
if not edges:
wrn = Translator.translate("Can't get any edge from selected objects")
FreeCAD.Console.PrintWarning(wrn)
return
obj = edges[0]
for i in range(0, len(edges)):
obj = obj.oldFuse(edges[i])
Part.show(obj)
objs = FreeCAD.ActiveDocument.Objects
obj = objs[len(objs) - 1]
obj.Label = 'Border'
def selectDirection(self):
if(self.form.direction.currentIndex() == 0): # XY
self.dir = Vector(0.0,0.0,1.0)
self.r = max(self.r, self.bound[4])
self.r = min(self.r, self.bound[5])
self.form.rText.setMinimum(self.bound[4])
self.form.rText.setMaximum(self.bound[5])
if(self.form.direction.currentIndex() == 1): # XZ
self.dir = Vector(0.0,1.0,0.0)
self.r = max(self.r, self.bound[2])
self.r = min(self.r, self.bound[3])
self.form.rText.setMinimum(self.bound[2])
self.form.rText.setMaximum(self.bound[3])
if(self.form.direction.currentIndex() == 2): # YZ
self.dir = Vector(1.0,0.0,0.0)
self.r = max(self.r, self.bound[0])
self.r = min(self.r, self.bound[1])
self.form.rText.setMinimum(self.bound[0])
self.form.rText.setMaximum(self.bound[1])
self.objs = self.preview.update(self.face, self.dir, self.r)
if not self.objs:
msg = Translator.translate("Can't calculate section")
App.Console.PrintWarning(msg)
def selectDirection(self):
if (self.form.direction.currentIndex() == 0): # XY
self.dir = Vector(0.0, 0.0, 1.0)
self.r = max(self.r, self.bound[4])
self.r = min(self.r, self.bound[5])
self.form.rText.setMinimum(self.bound[4])
self.form.rText.setMaximum(self.bound[5])
if (self.form.direction.currentIndex() == 1): # XZ
self.dir = Vector(0.0, 1.0, 0.0)
self.r = max(self.r, self.bound[2])
self.r = min(self.r, self.bound[3])
self.form.rText.setMinimum(self.bound[2])
self.form.rText.setMaximum(self.bound[3])
if (self.form.direction.currentIndex() == 2): # YZ
self.dir = Vector(1.0, 0.0, 0.0)
self.r = max(self.r, self.bound[0])
self.r = min(self.r, self.bound[1])
self.form.rText.setMinimum(self.bound[0])
self.form.rText.setMaximum(self.bound[1])
self.objs = self.preview.update(self.face, self.dir, self.r)
if not self.objs:
msg = Translator.translate("Can't calculate section")
App.Console.PrintWarning(msg)
def isClosed(self):
""" Returns if the edges objects are a closed curve.
@return True if a closed curve can be built with edge objects.
False otherwise
"""
edges = self.edges
for i in range(0,len(edges)):
edge = edges[i]
vertex1 = edge.Vertexes
count = [0,0]
for j in range(0,len(edges)):
if j== i:
continue
vertex2 = edges[j].Vertexes
for k in range(0,2):
if Math.isSameVertex(vertex1[0],vertex2[k]):
count[0] = count[0]+1
if Math.isSameVertex(vertex1[1],vertex2[k]):
count[1] = count[1]+1
if count != [1,1]:
msg = Translator.translate("4 Edges curve must be closed")
App.Console.PrintError(msg)
return False
return True
def selectDirection(self):
self.dirId = self.form.direction.currentIndex()
self.obj = self.preview.update(self.surf, self.dirId, self.uv)
if not self.obj:
msg = Translator.translate("Can't get the curve from selected object")
App.Console.PrintWarning(msg)
def GetResources(self):
from surfUtils import Paths, Translator
IconPath = Paths.iconsPath() + "/ConvertIco.png"
MenuText = str(Translator.translate('Convert to 4 sides surface'))
ToolTip = str(Translator.translate('Convert a surface (or couple of them) into 4 sides surface'))
return {'Pixmap' : IconPath, 'MenuText': MenuText, 'ToolTip': ToolTip}
def GetResources(self):
from surfUtils import Paths, Translator
IconPath = Paths.iconsPath() + "/BorderIco.png"
MenuText = str(Translator.translate('Get border'))
ToolTip = str(Translator.translate('Get edges from objects'))
return {'Pixmap' : IconPath, 'MenuText': MenuText, 'ToolTip': ToolTip}
def GetResources(self):
from surfUtils import Paths, Translator
IconPath = Paths.iconsPath() + "/SliceIco.png"
MenuText = str(Translator.translate('Get surface slice'))
ToolTip = str(Translator.translate('Get surface intersection with coordinates planes'))
return {'Pixmap' : IconPath, 'MenuText': MenuText, 'ToolTip': ToolTip}
def GetResources(self):
from surfUtils import Paths, Translator
IconPath = Paths.iconsPath() + "/IsoCurveIco.png"
MenuText = str(Translator.translate('Get ISO curve'))
ToolTip = str(Translator.translate('Get ISO curve from surface'))
return {'Pixmap' : IconPath, 'MenuText': MenuText, 'ToolTip': ToolTip}
def retranslateUi(self):
""" Set user interface locale strings.
"""
self.form.setWindowTitle(Translator.translate("Get surface slice"))
def retranslateUi(self):
""" Set user interface locale strings.
"""
self.form.setWindowTitle(Translator.translate("Get surface slice"))
def retranslateUi(self):
""" Set user interface locale strings.
"""
self.form.setWindowTitle(Translator.translate("Get surface ISO curve"))
self.form.direction.setItemText(0, Translator.translate("U direction"))
self.form.direction.setItemText(1, Translator.translate("V direction"))
def retranslateUi(self):
""" Set user interface locale strings.
"""
self.form.setWindowTitle(Translator.translate("Get surface ISO curve"))
self.form.direction.setItemText(0, Translator.translate("U direction"))
self.form.direction.setItemText(1, Translator.translate("V direction"))