def filesystem(_, target):
'''
Filesystem tests. This creates a filesystem image with the test file fstest.txt
in it, the compiles the program fs.c to perform operations on it. The program
will print 'PASS' if it is successful.
'''
test_harness.build_program(['fs.c'])
subprocess.check_output([
test_harness.BIN_DIR + 'mkfs', test_harness.WORK_DIR + '/fsimage.bin',
'fstest.txt'
],
stderr=subprocess.STDOUT)
result = test_harness.run_program(target=target,
block_device=test_harness.WORK_DIR +
'/fsimage.bin')
if 'PASS' not in result or 'FAIL' in result:
raise test_harness.TestException(
'test program did not indicate pass\n' + result)
def recv_serial(self):
"""Receive a single byte from the serial loader program.
The byte is meant to be sent to the dev board.
Args:
None
Returns:
integer byte value
Raises:
TestException if nothing can be read for over RECEIVE_TIMEOUT_S
seconds.
"""
r, _w, _e = select.select([self.pipe], [], [], RECEIVE_TIMEOUT_S)
if self.pipe in r:
return ord(os.read(self.pipe, 1))
else:
raise test_harness.TestException('serial read timed out')
def uart_echo_test(*unused):
'''Validate UART transfers in both directions.
The emulator direct all UART traffic through the terminal that
it is launched from.
'''
executable = test_harness.build_program(['uart_echo_test.c'])
args = [test_harness.EMULATOR_PATH, executable]
in_str = 'THE QUICK brOwn FOX jumPED Over THE LAZY DOG\n'
process = subprocess.Popen(args,
stdin=subprocess.PIPE,
stdout=subprocess.PIPE)
out_str, _ = test_harness.TimedProcessRunner().communicate(
process=process, timeout=10, input=in_str.encode('ascii'))
out_str = out_str.decode()
if 'the quick brown fox jumped over the lazy dog' not in out_str:
raise test_harness.TestException(
'Subprocess returned incorrect result \"' + out_str + '"')
def filesystem(_, target):
"""Test the filesystem implementation in libos.
This creates a filesystem image with the test file fstest.txt
in it, the compiles the program fs.c to perform operations on it. The program
will print 'PASS' if it is successful.
"""
hex_file = test_harness.build_program(['fs.c'])
subprocess.check_output([
os.path.join(test_harness.TOOL_BIN_DIR, 'mkfs'), FS_IMAGE_PATH,
'fstest.txt'
],
stderr=subprocess.STDOUT)
result = test_harness.run_program(hex_file,
target,
block_device=FS_IMAGE_PATH)
if 'PASS' not in result or 'FAIL' in result:
raise test_harness.TestException(
'test program did not indicate pass\n' + result)
def expect_serial_bytes(self, expect_sequence):
"""Receive a sequence of bytes from the serial loader and check them.
Args:
expect_sequence: list of int
The sequence of byte values that are expected to be received.
Returns:
Nothing
Raises:
TestException if the program doesn't send_serial this sequence of bytes
"""
if test_harness.DEBUG:
print('expect bytes: ' + str(expect_sequence))
for index, expect_byte in enumerate(expect_sequence):
got = self.recv_serial()
if got != expect_byte:
raise test_harness.TestException('serial mismatch @{}: expected {} got {}'.format(
index, expect_byte, got))
def recv_host_interrupt(_, target):
try:
os.remove(RECV_PIPE_NAME)
except OSError:
pass # Ignore if pipe doesn't exist
test_harness.build_program(['recv_host_interrupt.S'])
os.mknod(RECV_PIPE_NAME, stat.S_IFIFO | 0o666)
args = [
test_harness.BIN_DIR + 'emulator', '-i', RECV_PIPE_NAME,
test_harness.HEX_FILE
]
emulator_process = subprocess.Popen(args,
stdout=subprocess.PIPE,
stderr=subprocess.STDOUT)
try:
interrupt_pipe = os.open(RECV_PIPE_NAME, os.O_WRONLY)
# Send periodic interrupts to process'
try:
for intnum in range(5):
os.write(interrupt_pipe, str.encode(chr(intnum)))
time.sleep(0.2)
except OSError:
# Broken pipe will occur if the emulator exits early.
# We'll flag an error after communicate if we don't see a PASS.
pass
# Wait for completion
result, _ = test_harness.TimedProcessRunner().communicate(
emulator_process, 60)
strresult = str(result)
if 'PASS' not in strresult or 'FAIL' in strresult:
raise test_harness.TestException('Test failed ' + strresult)
finally:
os.close(interrupt_pipe)
os.unlink(RECV_PIPE_NAME)
def expect_serial_int(self, expected):
"""Check a 32-bit value received from the serial port.
The value is four bytes in little endian order.
Args:
expected: int
The value that should be received
Returns:
Nothing
Raises:
TestException if the number doesn't match.
"""
if test_harness.DEBUG:
print('expect int: ' + str(expected))
intval = self.recv_serial()
intval |= self.recv_serial() << 8
intval |= self.recv_serial() << 16
intval |= self.recv_serial() << 24
if intval != expected:
raise test_harness.TestException('Int value mismatch: wanted {} got {}'.format(
expected, intval))
def perf_counters(_):
test_harness.build_program(['perf_counters.c'])
result = test_harness.run_program(environment='verilator')
if 'PASS' not in result:
raise test_harness.TestException(
'test program did not indicate pass\n' + result)
def ps2(_, target):
test_harness.build_program(['ps2.c'])
result = test_harness.run_program(target)
if 'PASS' not in result:
raise test_harness.TestException('program did not indicate pass\n' +
result)
def multicore(_):
test_harness.build_program(['multicore.c'])
result = test_harness.run_program(environment='verilator')
if '012345678910111213141516171819202122232425262728293031' not in result.replace('\n', ''):
raise test_harness.TestException('Output mismatch:\n' + result)
def test_fill_emulator(name):
test_harness.compile_test(['fill_test.c', 'wrap_tlb_miss_handler.s'])
result = test_harness.run_emulator()
if result.find('FAIL') != -1 or result.find('PASS') == -1:
raise test_harness.TestException(result + '\ntest did not signal pass')
def uart_hw_test(*unused):
test_harness.build_program(['uart_hw_test.c'])
result = test_harness.run_program(target='verilator')
if 'PASS' not in result:
raise test_harness.TestException('test did not indicate pass\n' +
result)
def iinvalidate(_, target):
hex_file = test_harness.build_program(['iinvalidate.S'])
output = test_harness.run_program(hex_file, target)
if 'PASS' not in output:
raise test_harness.TestException('Test did not signal pass: ' + output)
def dflush_wait(_, target):
hex_file = test_harness.build_program(['dflush_wait.S'])
output = test_harness.run_program(hex_file, target)
if 'PASS' not in output:
raise test_harness.TestException('Test did not signal pass: ' + output)
def perf_counters(_, target):
test_harness.build_program(['perf_counters.c'])
result = test_harness.run_program(target)
if 'PASS' not in result:
raise test_harness.TestException(
'test program did not indicate pass\n' + result)
def multicore(_, target):
hex_file = test_harness.build_program(['multicore.S'])
result = test_harness.run_program(hex_file, target)
if 'ABCDEFGHIJKLMNOPQRSTUVWXYZ[\\]^_`' not in result:
raise test_harness.TestException('Output mismatch:\n' + result)
def uart(_):
test_harness.build_program(['uart.c'])
result = test_harness.run_program(environment='verilator')
if 'PASS' not in result:
raise test_harness.TestException(
'test did not indicate pass\n' + result)
def iinvalidate(_):
test_harness.build_program(['iinvalidate.S'])
output = test_harness.run_program(environment='verilator')
if 'PASS' not in output:
raise test_harness.TestException('Test did not signal pass: ' + output)
def dflush_wait(_):
test_harness.build_program(['dflush_wait.S'])
output = test_harness.run_program(environment='verilator')
if 'PASS' not in output:
raise test_harness.TestException('Test did not signal pass: ' + output)
