Ejemplos de set_country en Python

Ejemplo n.º 1

def test_wpas_ap_open_vht80(dev):
    """wpa_supplicant AP mode - VHT 80 MHz"""
    id = dev[0].add_network()
    dev[0].set("country", "FI")
    try:
        dev[0].set_network(id, "mode", "2")
        dev[0].set_network_quoted(id, "ssid", "wpas-ap-open")
        dev[0].set_network(id, "key_mgmt", "NONE")
        dev[0].set_network(id, "frequency", "5180")
        dev[0].set_network(id, "scan_freq", "5180")
        dev[0].set_network(id, "vht", "1")
        dev[0].set_network(id, "vht_center_freq1", "5210")
        dev[0].set_network(id, "max_oper_chwidth", "1")
        dev[0].set_network(id, "ht40", "1")
        dev[0].select_network(id)
        wait_ap_ready(dev[0])

        dev[1].connect("wpas-ap-open", key_mgmt="NONE", scan_freq="5180")
        sig = dev[1].request("SIGNAL_POLL").splitlines()
        hwsim_utils.test_connectivity(dev[0], dev[1])
        dev[1].request("DISCONNECT")
        dev[1].wait_disconnected()
        if "FREQUENCY=5180" not in sig:
            raise Exception("Unexpected SIGNAL_POLL value(1): " + str(sig))
        if "WIDTH=80 MHz" not in sig:
            raise Exception("Unexpected SIGNAL_POLL value(2): " + str(sig))
    finally:
        set_country("00")
        dev[0].set("country", "00")
        dev[1].flush_scan_cache()

Ejemplo n.º 2

Archivo: test_wpas_ap.py Proyecto: janetuk/mech_eap

def test_wpas_ap_open_vht80(dev):
    """wpa_supplicant AP mode - VHT 80 MHz"""
    id = dev[0].add_network()
    dev[0].set("country", "FI")
    try:
        dev[0].set_network(id, "mode", "2")
        dev[0].set_network_quoted(id, "ssid", "wpas-ap-open")
        dev[0].set_network(id, "key_mgmt", "NONE")
        dev[0].set_network(id, "frequency", "5180")
        dev[0].set_network(id, "scan_freq", "5180")
        dev[0].set_network(id, "vht", "1")
        dev[0].set_network(id, "vht_center_freq1", "5210")
        dev[0].set_network(id, "max_oper_chwidth", "1")
        dev[0].set_network(id, "ht40", "1")
        dev[0].select_network(id)
        wait_ap_ready(dev[0])

        dev[1].connect("wpas-ap-open", key_mgmt="NONE", scan_freq="5180")
        sig = dev[1].request("SIGNAL_POLL").splitlines()
        hwsim_utils.test_connectivity(dev[0], dev[1])
        dev[1].request("DISCONNECT")
        dev[1].wait_disconnected()
        if "FREQUENCY=5180" not in sig:
            raise Exception("Unexpected SIGNAL_POLL value(1): " + str(sig))
        if "WIDTH=80 MHz" not in sig:
            raise Exception("Unexpected SIGNAL_POLL value(2): " + str(sig))
    finally:
        set_country("00")
        dev[0].set("country", "00")
        dev[1].flush_scan_cache()

Ejemplo n.º 3

def _test_wpas_ap_dfs(dev):
    set_country("US")
    dev[0].request("SET country US")
    id = dev[0].add_network()
    dev[0].set_network(id, "mode", "2")
    dev[0].set_network_quoted(id, "ssid", "wpas-ap-dfs")
    dev[0].set_network(id, "key_mgmt", "NONE")
    dev[0].set_network(id, "frequency", "5260")
    dev[0].set_network(id, "scan_freq", "5260")
    dev[0].select_network(id)

    ev = dev[0].wait_event(["DFS-CAC-START"])
    if ev is None:
        # For now, assume DFS is not supported by all kernel builds.
        raise HwsimSkip("CAC did not start - assume not supported")

    ev = dev[0].wait_event(["DFS-CAC-COMPLETED"], timeout=70)
    if ev is None:
        raise Exception("CAC did not complete")
    if "success=1" not in ev:
        raise Exception("CAC failed")
    if "freq=5260" not in ev:
        raise Exception("Unexpected DFS freq result")

    ev = dev[0].wait_event(["CTRL-EVENT-CONNECTED"])
    if ev is None:
        raise Exception("AP failed to start")

    dev[1].connect("wpas-ap-dfs", key_mgmt="NONE")
    dev[1].wait_regdom(country_ie=True)
    dev[0].request("DISCONNECT")
    dev[1].disconnect_and_stop_scan()

Ejemplo n.º 4

Archivo: test_wpas_ap.py Proyecto: cococorp/hostap-upstream

def _test_wpas_ap_dfs(dev):
    set_country("US")
    dev[0].request("SET country US")
    id = dev[0].add_network()
    dev[0].set_network(id, "mode", "2")
    dev[0].set_network_quoted(id, "ssid", "wpas-ap-dfs")
    dev[0].set_network(id, "key_mgmt", "NONE")
    dev[0].set_network(id, "frequency", "5260")
    dev[0].set_network(id, "scan_freq", "5260")
    dev[0].select_network(id)

    ev = dev[0].wait_event(["DFS-CAC-START"])
    if ev is None:
        # For now, assume DFS is not supported by all kernel builds.
        raise HwsimSkip("CAC did not start - assume not supported")

    ev = dev[0].wait_event(["DFS-CAC-COMPLETED"], timeout=70)
    if ev is None:
        raise Exception("CAC did not complete")
    if "success=1" not in ev:
        raise Exception("CAC failed")
    if "freq=5260" not in ev:
        raise Exception("Unexpected DFS freq result")

    ev = dev[0].wait_event(["CTRL-EVENT-CONNECTED"])
    if ev is None:
        raise Exception("AP failed to start")

    dev[1].connect("wpas-ap-dfs", key_mgmt="NONE")

Ejemplo n.º 5

def test_wpas_ap_5ghz(dev):
    """wpa_supplicant AP mode - 5 GHz"""
    try:
        _test_wpas_ap_5ghz(dev)
    finally:
        set_country("00")
        dev[0].request("SET country 00")
        dev[1].flush_scan_cache()

Ejemplo n.º 6

Archivo: test_wpas_ap.py Proyecto: fuyajun1983cn/wpa_supplicant

def test_wpas_ap_dfs(dev):
    """wpa_supplicant AP mode - DFS"""
    try:
        _test_wpas_ap_dfs(dev)
    finally:
        set_country("00")
        dev[0].request("SET country 00")
        dev[1].flush_scan_cache()

Ejemplo n.º 7

def test_wpas_ap_dfs(dev):
    """wpa_supplicant AP mode - DFS"""
    if dev[0].get_mcc() > 1:
        raise HwsimSkip("DFS is not supported with multi channel contexts")

    try:
        _test_wpas_ap_dfs(dev)
    finally:
        set_country("00")
        dev[0].request("SET country 00")
        dev[1].flush_scan_cache()

Ejemplo n.º 8

Archivo: test_wpas_ap.py Proyecto: cococorp/hostap-upstream

def test_wpas_ap_dfs(dev):
    """wpa_supplicant AP mode - DFS"""
    if dev[0].get_mcc() > 1:
        raise HwsimSkip("DFS is not supported with multi channel contexts")

    try:
        _test_wpas_ap_dfs(dev)
    finally:
        set_country("00")
        dev[0].request("SET country 00")
        dev[1].flush_scan_cache()

Ejemplo n.º 9

def _test_wpas_ap_5ghz(dev):
    set_country("US")
    dev[0].request("SET country US")
    id = dev[0].add_network()
    dev[0].set_network(id, "mode", "2")
    dev[0].set_network_quoted(id, "ssid", "wpas-ap-5ghz")
    dev[0].set_network(id, "key_mgmt", "NONE")
    dev[0].set_network(id, "frequency", "5180")
    dev[0].set_network(id, "scan_freq", "5180")
    dev[0].select_network(id)
    wait_ap_ready(dev[0])

    dev[1].connect("wpas-ap-5ghz", key_mgmt="NONE", scan_freq="5180")
    dev[1].request("DISCONNECT")
    dev[1].wait_disconnected()

Ejemplo n.º 10

Archivo: test_p2p_discovery.py Proyecto: swathiramya/hostapd

def test_discovery_restart_progressive(dev):
    """P2P device discovery and p2p_find type=progressive restart"""
    try:
        set_country("US", dev[1])
        autogo(dev[1], freq=5805)
        dev[0].p2p_find(social=True)
        dev[0].p2p_stop_find()
        dev[0].p2p_find(progressive=True)
        ev = dev[0].wait_global_event(["P2P-DEVICE-FOUND"], timeout=20)
        dev[1].remove_group()
        if ev is None:
            raise Exception("Peer not found")
    finally:
        set_country("00")
        dev[1].flush_scan_cache()

Ejemplo n.º 11

Archivo: test_p2p_discovery.py Proyecto: janetuk/mech_eap

def test_discovery_restart_progressive(dev):
    """P2P device discovery and p2p_find type=progressive restart"""
    try:
        set_country("US", dev[1])
        autogo(dev[1], freq=5805)
        dev[0].p2p_find(social=True)
        dev[0].p2p_stop_find()
        dev[0].p2p_find(progressive=True)
        ev = dev[0].wait_global_event(["P2P-DEVICE-FOUND"], timeout=20)
        dev[1].remove_group()
        if ev is None:
            raise Exception("Peer not found")
    finally:
        set_country("00")
        dev[1].flush_scan_cache()

Ejemplo n.º 12

Archivo: test_wpas_ap.py Proyecto: janetuk/mech_eap

def _test_wpas_ap_5ghz(dev):
    set_country("US")
    dev[0].request("SET country US")
    id = dev[0].add_network()
    dev[0].set_network(id, "mode", "2")
    dev[0].set_network_quoted(id, "ssid", "wpas-ap-5ghz")
    dev[0].set_network(id, "key_mgmt", "NONE")
    dev[0].set_network(id, "frequency", "5180")
    dev[0].set_network(id, "scan_freq", "5180")
    dev[0].select_network(id)
    wait_ap_ready(dev[0])

    dev[1].connect("wpas-ap-5ghz", key_mgmt="NONE", scan_freq="5180")
    dev[1].request("DISCONNECT")
    dev[1].wait_disconnected()

Ejemplo n.º 13

Archivo: test_wpas_ap.py Proyecto: Frank0223/hostap-ct

def test_wpas_ap_async_fail(dev):
    """wpa_supplicant AP mode - Async failure"""
    id = dev[0].add_network()
    dev[0].set("country", "FI")
    try:
        dev[0].set_network(id, "mode", "2")
        dev[0].set_network_quoted(id, "ssid", "wpas-ap-open")
        dev[0].set_network(id, "key_mgmt", "NONE")
        dev[0].set_network(id, "frequency", "5180")
        dev[0].set_network(id, "scan_freq", "5180")
        dev[0].set_network(id, "vht", "1")
        dev[0].set_network(id, "vht_center_freq1", "5210")
        dev[0].set_network(id, "max_oper_chwidth", "1")
        dev[0].set_network(id, "ht40", "1")

        with alloc_fail(dev[0], 1,
                        "nl80211_get_scan_results;ieee80211n_check_scan"):
            dev[0].select_network(id)
            dev[0].wait_disconnected()
    finally:
        set_country("00")
        dev[0].set("country", "00")

Ejemplo n.º 14

Archivo: test_wpas_ap.py Proyecto: janetuk/mech_eap

def test_wpas_ap_async_fail(dev):
    """wpa_supplicant AP mode - Async failure"""
    id = dev[0].add_network()
    dev[0].set("country", "FI")
    try:
        dev[0].set_network(id, "mode", "2")
        dev[0].set_network_quoted(id, "ssid", "wpas-ap-open")
        dev[0].set_network(id, "key_mgmt", "NONE")
        dev[0].set_network(id, "frequency", "5180")
        dev[0].set_network(id, "scan_freq", "5180")
        dev[0].set_network(id, "vht", "1")
        dev[0].set_network(id, "vht_center_freq1", "5210")
        dev[0].set_network(id, "max_oper_chwidth", "1")
        dev[0].set_network(id, "ht40", "1")

        with alloc_fail(dev[0], 1,
                        "nl80211_get_scan_results;ieee80211n_check_scan"):
            dev[0].select_network(id)
            dev[0].wait_disconnected()
    finally:
        set_country("00")
        dev[0].set("country", "00")