def guiSetup():
global bar, operator_id, bdframe
cfg.print_cfg()
cfgframe = ConfigFrame(tkroot, cfg)
cfgframe.grid(padx=3, pady=3)
bdframe = BoardFrame(tkroot, bd)
bdframe.grid(padx=3, pady=3)
max = 6 * 60 + 30
bar = ProgressFrame(tkroot, max)
# Center the Window
tkroot.update_idletasks()
xp = (tkroot.winfo_screenwidth() / 2) - (tkroot.winfo_width() / 2) - 8
yp = (tkroot.winfo_screenheight() / 4) - (tkroot.winfo_height() / 2) - 20
tkroot.geometry('{0}x{1}+{2}+{3}'.format(tkroot.winfo_width(),
tkroot.winfo_height(), xp, yp))
tkroot.update()
# get operator ID
operator_id = ''
while len(operator_id) == 0:
pw = EntryWindow(tkroot, "Scan or Enter Operator ID ",
'Scan or Enter Operator ID', '')
operator_id = pw.answer.get()
cfgframe.SetOperator(operator_id)
def guiSetup():
global bar, operator_id, bdframe
cfg.print_cfg()
cfgframe = ConfigFrame(tkroot, cfg)
cfgframe.grid(padx=3, pady=3)
bdframe = BoardFrame(tkroot, bd)
bdframe.grid(padx=3, pady=3)
max = 6 * 60 + 30
bar = ProgressFrame(tkroot, max)
# Center the Window
tkroot.update_idletasks()
xp = (tkroot.winfo_screenwidth() / 2) - (tkroot.winfo_width() / 2) - 8
yp = (tkroot.winfo_screenheight() / 4) - (tkroot.winfo_height() / 2) - 20
tkroot.geometry('{0}x{1}+{2}+{3}'.format(tkroot.winfo_width(), tkroot.winfo_height(), xp, yp))
tkroot.update()
# get operator ID
operator_id = ''
while len(operator_id) == 0:
pw = EntryWindow( tkroot, "Scan or Enter Operator ID ", 'Scan or Enter Operator ID','')
operator_id = pw.answer.get()
cfgframe.SetOperator(operator_id)
class GUI(Tk):
def __init__(self, title, odo_name='GUItest', icon=None):
Tk.__init__(self)
# tkroot.geometry("1000x500+450+350")
s = Style()
s.configure('Title.TLabel', font="ariel 20 bold")
s.configure('TButton', font="ariel 14 bold")
# s.configure('TLabel',font="ariel 10 normal")
self.option_add("*TButton.Font", "ariel 12 bold")
self.option_add("*Label.Font", "Helvetica 12 bold")
self.title(title)
self.tk.call('wm', 'iconbitmap', self._w, '-default',
'c:/airfiber/airview.ico')
# init the test ConfigFrame
self.cfgframe = ConfigFrame(self, title, odo_name)
self.cfgframe.grid(padx=3, pady=3)
# init Progress Bar
max = 60 * 12
self.bar = ProgressFrame(self, max)
# init board.conf configuration
self.boardframe = BoardFrame(self)
self.boardframe.grid(padx=5, pady=5)
#
# Center the Window
self.update_idletasks()
xp = (self.winfo_screenwidth() / 2) - (self.winfo_width() / 2) - 8
yp = (self.winfo_screenheight() / 4) - (self.winfo_height() / 2) - 20
self.geometry('{0}x{1}+{2}+{3}'.format(self.winfo_width(),
self.winfo_height(), xp, yp))
self.update()
#====================================================================
# Progress bar update routines
#====================================================================
basetime = 0.0
def elapsedTime(self, flag):
if flag == 0:
self.basetime = clock()
now = clock()
return (now - self.basetime)
def updProgressBar(self, msg=''):
elapsed = self.elapsedTime(1)
self.bar.settime(elapsed)
if msg != '':
self.bar.activity.set(msg)
self.bar.update()
def closeProgressBar(self):
self.bar.config(text='Test Progress ')
self.bar.settime(0)
self.elapsedTime(0)
self.bar.activity.set(" ")
self.bar.update()
def setProgressBarTitle(self, title):
self.bar.config(text='Test Progress ' + title)
self.bar.update()
def completeProgressBar(self):
elapsed = self.elapsedTime(1)
self.bar.settimecomplete(elapsed)
self.bar.activity.set("Test Complete")
self.bar.update()
#====================================================================
# bump odometer count
#====================================================================
def BumpOdometer(self):
self.cfgframe.BumpOdometer()
def openOdometer(self, odo_name):
self.cfgframe.openOdometer(odo_name)
#====================================================================
# Prompt Window
#====================================================================
def Prompt_Window(self, title, question, yestxt="Yes", notxt='No'):
pw = PromptWindow(self, title, question, yestxt=yestxt, notxt=notxt)
return pw.answer.get()
#====================================================================
# INFO Window
#====================================================================
def Info_Window(self, title, info_text):
pw = InfoWindow(self, title, info_text)
return pw.answer.get()
#====================================================================
# Scan or Enter Operator ID
#====================================================================
def EnterOperatorID(self):
operator_id = ''
while len(operator_id) == 0:
pw = EntryWindow(self, "Scan or Enter Operator ID ",
'Scan or Enter Operator ID', '')
operator_id = pw.answer.get()
self.cfgframe.SetOperator(operator_id)
return operator_id
#====================================================================
# scan part number
#
# return
# PartNumber: 13-00218-XX CCC
# HWREV: XX
# CCODE: CCC
#====================================================================
def scan_part_number(self):
default_pn = '13-02042-' #'13-00218-'
default_field1 = '13'
default_field2 = '00218'
raw_input = ''
while True:
pw = EntryWindow(self, "Scan Part Number barcode ",
'Enter UUT Part Number', '')
raw_input = pw.answer.get()
if raw_input == '':
print "Null imput"
continue
valid, pn, hwrev, ssid, ccode = PartNumber(raw_input)
if valid == False:
continue
print "PartNumber: %s" % pn
print "HWREV %s" % hwrev
print "CCODE %s" % ccode
print "SSID %s" % ssid
self.boardframe.set_ccode(ccode)
self.boardframe.set_hwrev(hwrev)
self.boardframe.set_ssid(ssid)
break
return pn, hwrev, ccode, ssid
def InputWindow(self, title, prompt):
pw = EntryWindow(self, title, prompt)
return rw.answer.get()
def set_ccode(self, ccode):
self.boardframe.set_ccode(ccode)
def set_hwrev(self, hwrev):
self.boardframe.set_hwrev(hwrev)
def set_ssid(self, ssid):
self.boardframe.set_ssid(ssid)
#====================================================================
# get MAC address and generate MAC0 and MAC1 addresses
#====================================================================
def input_mac(self):
default_mac = '002722DA0000'
rawmac = default_mac
while rawmac == default_mac or len(rawmac) != 12 or rawmac.isalnum(
) == False:
pw = EntryWindow(self, "Scan Serial Number ",
'Enter UUT serial number', default_mac)
rawmac = pw.answer.get()
rawmac = rawmac.upper()
print rawmac
mac0 = \
rawmac[0:2] + ":" +\
rawmac[2:4] + ":" +\
rawmac[4:6] + ":" +\
rawmac[6:8] + ":" +\
rawmac[8:10] + ":" + \
rawmac[10:12]
hex = int(rawmac[0:2], 16)
hex = hex | 0x02
mac1 = \
'%02X:' % hex +\
rawmac[2:4] + ":" +\
rawmac[4:6] + ":" +\
rawmac[6:8] + ":" +\
rawmac[8:10] + ":" + \
rawmac[10:12]
return mac0, mac1
class GUI( Tk ):
def __init__( self, title, odo_name = 'GUItest', icon = None ):
Tk.__init__(self)
# tkroot.geometry("1000x500+450+350")
s = Style()
s.configure('Title.TLabel', font="ariel 20 bold")
s.configure('TButton', font="ariel 14 bold")
# s.configure('TLabel',font="ariel 10 normal")
self.option_add("*TButton.Font", "ariel 12 bold")
self.option_add("*Label.Font", "Helvetica 12 bold")
self.title(title)
self.tk.call('wm', 'iconbitmap', self._w, '-default', 'c:/airfiber/airview.ico')
# init the test ConfigFrame
self.cfgframe = ConfigFrame(self, title, odo_name )
self.cfgframe.grid(padx=3, pady=3)
# init Progress Bar
max = 60 * 12
self.bar = ProgressFrame(self, max)
# init board.conf configuration
self.boardframe = BoardFrame(self)
self.boardframe.grid(padx=5, pady=5)
#
# Center the Window
self.update_idletasks()
xp = (self.winfo_screenwidth() / 2) - (self.winfo_width() / 2) - 8
yp = (self.winfo_screenheight() / 4) - (self.winfo_height() / 2) - 20
self.geometry('{0}x{1}+{2}+{3}'.format(self.winfo_width(), self.winfo_height(), xp, yp))
self.update()
#====================================================================
# Progress bar update routines
#====================================================================
basetime = 0.0
def elapsedTime( self, flag ):
if flag == 0:
self.basetime = clock()
now = clock()
return (now - self.basetime)
def updProgressBar( self, msg=''):
elapsed = self.elapsedTime(1)
self.bar.settime( elapsed )
if msg != '':
self.bar.activity.set(msg)
self.bar.update()
def closeProgressBar( self ):
self.bar.config( text='Test Progress ')
self.bar.settime(0)
self.elapsedTime(0)
self.bar.activity.set(" ")
self.bar.update()
def setProgressBarTitle( self, title ):
self.bar.config( text='Test Progress ' + title)
self.bar.update()
def completeProgressBar( self ):
elapsed = self.elapsedTime(1)
self.bar.settimecomplete( elapsed )
self.bar.activity.set("Test Complete")
self.bar.update()
#====================================================================
# bump odometer count
#====================================================================
def BumpOdometer( self ):
self.cfgframe.BumpOdometer()
def openOdometer( self, odo_name):
self.cfgframe.openOdometer( odo_name )
#====================================================================
# Prompt Window
#====================================================================
def Prompt_Window( self, title, question , yestxt = "Yes", notxt = 'No' ):
pw = PromptWindow( self, title, question , yestxt = yestxt, notxt = notxt);
return pw.answer.get()
#====================================================================
# INFO Window
#====================================================================
def Info_Window( self, title, info_text ):
pw = InfoWindow( self, title, info_text);
return pw.answer.get()
#====================================================================
# Scan or Enter Operator ID
#====================================================================
def EnterOperatorID( self ):
operator_id = ''
while len(operator_id) == 0:
pw = EntryWindow( self, "Scan or Enter Operator ID ", 'Scan or Enter Operator ID','')
operator_id = pw.answer.get()
self.cfgframe.SetOperator(operator_id)
return operator_id
#====================================================================
# scan part number
#
# return
# PartNumber: 13-00218-XX CCC
# HWREV: XX
# CCODE: CCC
#====================================================================
def scan_part_number( self ):
default_pn = '13-02042-' #'13-00218-'
default_field1 = '13'
default_field2 = '00218'
raw_input = ''
while True:
pw = EntryWindow( self, "Scan Part Number barcode ", 'Enter UUT Part Number', '')
raw_input = pw.answer.get()
if raw_input == '':
print "Null imput"
continue
valid, pn, hwrev, ssid, ccode = PartNumber( raw_input )
if valid == False:
continue
print "PartNumber: %s" % pn
print "HWREV %s" % hwrev
print "CCODE %s" % ccode
print "SSID %s" % ssid
self.boardframe.set_ccode(ccode)
self.boardframe.set_hwrev(hwrev)
self.boardframe.set_ssid(ssid)
break
return pn, hwrev, ccode, ssid
def InputWindow( self, title, prompt ):
pw = EntryWindow( self, title, prompt );
return rw.answer.get()
def set_ccode(self, ccode):
self.boardframe.set_ccode(ccode)
def set_hwrev( self, hwrev):
self.boardframe.set_hwrev(hwrev)
def set_ssid( self, ssid ):
self.boardframe.set_ssid(ssid)
#====================================================================
# get MAC address and generate MAC0 and MAC1 addresses
#====================================================================
def input_mac( self ):
default_mac = '002722DA0000'
rawmac = default_mac
while rawmac == default_mac or len(rawmac) != 12 or rawmac.isalnum() == False:
pw = EntryWindow( self, "Scan Serial Number ", 'Enter UUT serial number', default_mac)
rawmac = pw.answer.get()
rawmac = rawmac.upper()
print rawmac
mac0 = \
rawmac[0:2] + ":" +\
rawmac[2:4] + ":" +\
rawmac[4:6] + ":" +\
rawmac[6:8] + ":" +\
rawmac[8:10] + ":" + \
rawmac[10:12]
hex = int(rawmac[0:2],16)
hex = hex | 0x02
mac1 = \
'%02X:' % hex +\
rawmac[2:4] + ":" +\
rawmac[4:6] + ":" +\
rawmac[6:8] + ":" +\
rawmac[8:10] + ":" + \
rawmac[10:12]
return mac0,mac1