def run(ceph_cluster, **kw):
"""
Test Cases Covered :
CEPH-83573405 Test to validate the removal of quota_max_files
Create a FS and create 10 directories and mount them on kernel client and fuse client(5 mounts each)
Set max files quota to a number(say 50) and add up to that number of files to that directory and
verify if the set quota limit is working fine. Remove the quota once it reaches the max number of
files and try adding more files, verify if set quota is removed. Repeat the procedure for few more
times.
Pre-requisites :
1. We need atleast one client node to execute this test case
2. create fs volume create cephfs if the volume is not there
3. ceph fs subvolumegroup create <vol_name> <group_name> --pool_layout <data_pool_name>
Ex : ceph fs subvolumegroup create cephfs subvolgroup_clone_attr_vol_1
4. ceph fs subvolume create <vol_name> <subvol_name> [--size <size_in_bytes>] [--group_name <subvol_group_name>]
[--pool_layout <data_pool_name>] [--uid <uid>] [--gid <gid>] [--mode <octal_mode>] [--namespace-isolated]
Ex: ceph fs subvolume create cephfs subvol_1 --size 5368706371 --group_name subvolgroup_1
5. ceph fs subvolume create <vol_name> <subvol_name> [--size <size_in_bytes>] [--group_name <subvol_group_name>]
[--pool_layout <data_pool_name>] [--uid <uid>] [--gid <gid>] [--mode <octal_mode>] [--namespace-isolated]
Ex: ceph fs subvolume create cephfs subvol_2 --size 5368706371 --group_name subvolgroup_1
Test Case Flow:
1. Mount the subvolume_1 on the client using fuse
2. Mount the subvolume_2 on the client using kernel
3. set file attribute 10 on both mount points
4. Create 11 files and check it fails at 11 iteration
5. Perform same on kernel mount
6. Create a directory inside fuse mount and set file attribute and verify
7. Create a directory inside kernel mount and set file attribute and verify
8. Remove the quota of files and try creating the files on the same directory used in step 3 ie., set files to 0
9. Perorm same on Kernel mount
"""
try:
fs_util = FsUtils(ceph_cluster)
config = kw.get("config")
clients = ceph_cluster.get_ceph_objects("client")
build = config.get("build", config.get("rhbuild"))
fs_util.prepare_clients(clients, build)
fs_util.auth_list(clients)
log.info("checking Pre-requisites")
if not clients:
log.info(
f"This test requires minimum 1 client nodes.This has only {len(clients)} clients"
)
return 1
default_fs = "cephfs"
mounting_dir = "".join(
random.choice(string.ascii_lowercase + string.digits)
for _ in list(range(10)))
client1 = clients[0]
fs_details = fs_util.get_fs_info(client1)
if not fs_details:
fs_util.create_fs(client1, "cephfs")
subvolumegroup_list = [
{
"vol_name": default_fs,
"group_name": "subvolgroup_quota_file_remove_1"
},
]
for subvolumegroup in subvolumegroup_list:
fs_util.create_subvolumegroup(client1, **subvolumegroup)
subvolume_list = [
{
"vol_name": default_fs,
"subvol_name": "subvol_file_remove_fuse",
"group_name": "subvolgroup_quota_file_remove_1",
"size": "5368706371",
},
{
"vol_name": default_fs,
"subvol_name": "subvol_file_remove_kernel",
"group_name": "subvolgroup_quota_file_remove_1",
"size": "5368706371",
},
]
for subvolume in subvolume_list:
fs_util.create_subvolume(clients[0], **subvolume)
kernel_mounting_dir_1 = f"/mnt/cephfs_kernel{mounting_dir}_1/"
mon_node_ips = fs_util.get_mon_node_ips()
log.info("Get the path of sub volume")
subvol_path, rc = clients[0].exec_command(
sudo=True,
cmd=
f"ceph fs subvolume getpath {default_fs} subvol_file_remove_kernel subvolgroup_quota_file_remove_1",
)
fs_util.kernel_mount(
[clients[0]],
kernel_mounting_dir_1,
",".join(mon_node_ips),
sub_dir=f"{subvol_path.read().decode().strip()}",
)
subvol_path, rc = clients[0].exec_command(
sudo=True,
cmd=
f"ceph fs subvolume getpath {default_fs} subvol_file_remove_fuse subvolgroup_quota_file_remove_1",
)
fuse_mounting_dir_1 = f"/mnt/cephfs_fuse{mounting_dir}_1/"
fs_util.fuse_mount(
[clients[0]],
fuse_mounting_dir_1,
extra_params=f" -r {subvol_path.read().decode().strip()}",
)
fs_util.set_quota_attrs(clients[0], 100, 10000000, fuse_mounting_dir_1)
quota_attrs = fs_util.get_quota_attrs(clients[0], fuse_mounting_dir_1)
fs_util.file_quota_test(clients[0], fuse_mounting_dir_1, quota_attrs)
log.info("Removing the quota to 0 and validating file quota attr")
fs_util.set_quota_attrs(clients[0], "0", "10000000",
fuse_mounting_dir_1)
quota_attrs = fs_util.get_quota_attrs(clients[0], fuse_mounting_dir_1)
fs_util.file_quota_test(clients[0], fuse_mounting_dir_1, quota_attrs)
fs_util.set_quota_attrs(clients[0], 100, 10000000,
kernel_mounting_dir_1)
quota_attrs = fs_util.get_quota_attrs(clients[0],
kernel_mounting_dir_1)
fs_util.file_quota_test(clients[0], kernel_mounting_dir_1, quota_attrs)
log.info("Increasing the quota to 0 and validating file quota attr")
fs_util.set_quota_attrs(clients[0], "0", 10000000,
kernel_mounting_dir_1)
quota_attrs = fs_util.get_quota_attrs(clients[0],
kernel_mounting_dir_1)
fs_util.file_quota_test(clients[0], kernel_mounting_dir_1, quota_attrs)
return 0
except Exception as e:
log.info(e)
log.info(traceback.format_exc())
return 1
finally:
log.info("Clean Up in progess")
for subvolume in subvolume_list:
fs_util.remove_subvolume(client1, **subvolume)
for subvolumegroup in subvolumegroup_list:
fs_util.remove_subvolumegroup(client1,
**subvolumegroup,
force=True)
def run(ceph_cluster, **kw):
"""
Test Cases Covered :
CEPH-83573401 Test to validate the increase in quota limit once it reaches the max limit. (bytes)
Create a FS and create 10 directories and mount them on kernel client and fuse client(5 mounts
each).
Set max bytes quota to a number(say 1Gb) and fill data until it reaches the limit and verify if
the set quota limit is working fine. Increase the set quota limit to more that what was set
earlier and fill more data and verify. Similarly set different limit on different directories,
increase the limit and verify it’s functionality and verify quota.
Pre-requisites :
1. We need atleast one client node to execute this test case
2. create fs volume create cephfs if the volume is not there
3. ceph fs subvolumegroup create <vol_name> <group_name> --pool_layout <data_pool_name>
Ex : ceph fs subvolumegroup create cephfs subvolgroup_clone_attr_vol_1
4. ceph fs subvolume create <vol_name> <subvol_name> [--size <size_in_bytes>] [--group_name <subvol_group_name>]
[--pool_layout <data_pool_name>] [--uid <uid>] [--gid <gid>] [--mode <octal_mode>] [--namespace-isolated]
Ex: ceph fs subvolume create cephfs subvol_1 --size 5368706371 --group_name subvolgroup_1
5. ceph fs subvolume create <vol_name> <subvol_name> [--size <size_in_bytes>] [--group_name <subvol_group_name>]
[--pool_layout <data_pool_name>] [--uid <uid>] [--gid <gid>] [--mode <octal_mode>] [--namespace-isolated]
Ex: ceph fs subvolume create cephfs subvol_2 --size 5368706371 --group_name subvolgroup_1
Test Case Flow:
1. Mount the subvolume_1 on the client using fuse
2. Mount the subvolume_2 on the client using kernel
3. set quota attribute 1gb on both mount points
4. Create 3gb bytes and check it fails
5. Perform same on kernel mount
6 Increase the quota of bytes to 3gb and try creating the files on the same directory used in step 3
7. Perform same on Kernel mount
"""
try:
fs_util = FsUtils(ceph_cluster)
config = kw.get("config")
clients = ceph_cluster.get_ceph_objects("client")
build = config.get("build", config.get("rhbuild"))
fs_util.prepare_clients(clients, build)
fs_util.auth_list(clients)
log.info("checking Pre-requisites")
if not clients:
log.info(
f"This test requires minimum 1 client nodes.This has only {len(clients)} clients"
)
return 1
default_fs = "cephfs"
mounting_dir = "".join(
random.choice(string.ascii_lowercase + string.digits)
for _ in list(range(10)))
client1 = clients[0]
fs_details = fs_util.get_fs_info(client1)
if not fs_details:
fs_util.create_fs(client1, "cephfs")
subvolumegroup_list = [
{
"vol_name": default_fs,
"group_name": "subvolgroup_quota_byte_increase_1"
},
]
for subvolumegroup in subvolumegroup_list:
fs_util.create_subvolumegroup(client1, **subvolumegroup)
subvolume_list = [
{
"vol_name": default_fs,
"subvol_name": "subvol_byte_incr_fuse",
"group_name": "subvolgroup_quota_byte_increase_1",
"size": "5368706371",
},
{
"vol_name": default_fs,
"subvol_name": "subvol_byte_incr_kernel",
"group_name": "subvolgroup_quota_byte_increase_1",
"size": "5368706371",
},
]
for subvolume in subvolume_list:
fs_util.create_subvolume(clients[0], **subvolume)
kernel_mounting_dir_1 = f"/mnt/cephfs_kernel{mounting_dir}_1/"
mon_node_ips = fs_util.get_mon_node_ips()
log.info("Get the path of sub volume")
subvol_path, rc = clients[0].exec_command(
sudo=True,
cmd=
f"ceph fs subvolume getpath {default_fs} subvol_byte_incr_kernel subvolgroup_quota_byte_increase_1",
)
fs_util.kernel_mount(
[clients[0]],
kernel_mounting_dir_1,
",".join(mon_node_ips),
sub_dir=f"{subvol_path.read().decode().strip()}",
)
subvol_path, rc = clients[0].exec_command(
sudo=True,
cmd=
f"ceph fs subvolume getpath {default_fs} subvol_byte_incr_fuse subvolgroup_quota_byte_increase_1",
)
fuse_mounting_dir_1 = f"/mnt/cephfs_fuse{mounting_dir}_1/"
fs_util.fuse_mount(
[clients[0]],
fuse_mounting_dir_1,
extra_params=f" -r {subvol_path.read().decode().strip()}",
)
fs_util.set_quota_attrs(clients[0], 50, 1073741824,
fuse_mounting_dir_1)
quota_attrs = fs_util.get_quota_attrs(clients[0], fuse_mounting_dir_1)
fs_util.byte_quota_test(clients[0], fuse_mounting_dir_1, quota_attrs)
log.info("Increasing the quota to 100 and validating file quota attr")
fs_util.set_quota_attrs(clients[0], 100, 3221225472,
fuse_mounting_dir_1)
quota_attrs = fs_util.get_quota_attrs(clients[0], fuse_mounting_dir_1)
fs_util.byte_quota_test(clients[0], fuse_mounting_dir_1, quota_attrs)
fs_util.set_quota_attrs(clients[0], 50, 1073741824,
kernel_mounting_dir_1)
quota_attrs = fs_util.get_quota_attrs(clients[0],
kernel_mounting_dir_1)
fs_util.byte_quota_test(clients[0], kernel_mounting_dir_1, quota_attrs)
log.info("Increasing the quota to 100 and validating file quota attr")
fs_util.set_quota_attrs(clients[0], 100, 3221225472,
kernel_mounting_dir_1)
quota_attrs = fs_util.get_quota_attrs(clients[0],
kernel_mounting_dir_1)
fs_util.byte_quota_test(clients[0], kernel_mounting_dir_1, quota_attrs)
return 0
except Exception as e:
log.info(e)
log.info(traceback.format_exc())
return 1
finally:
log.info("Clean Up in progess")
for subvolume in subvolume_list:
fs_util.remove_subvolume(client1, **subvolume)
for subvolumegroup in subvolumegroup_list:
fs_util.remove_subvolumegroup(client1,
**subvolumegroup,
force=True)
def run(ceph_cluster, **kw):
"""
Pre-requisites :
1. create fs volume create cephfs and cephfs-ec
Subvolume Group Operations :
1. ceph fs subvolumegroup create <vol_name> <group_name>
2. ceph fs subvolume create <vol_name> <subvol_name> [--size <size_in_bytes>] [--group_name <subvol_group_name>]
3. Mount subvolume on both fuse and kernel clients and run IO's
4. ceph fs subvolume resize <vol_name> <subvolume_name> <new_size> [--group_name <subvol_group>]
5. Mount subvolume on both fuse and kernel clients and run IO's
6. Validate the resize.
Clean-up:
1. Remove files from mountpoint, Unmount subvolumes.
2. Remove the pools added as part of pool_layout
3. ceph fs subvolume rm <vol_name> <subvol_name> [--group_name <subvol_group_name>]
4. ceph fs subvolumegroup rm <vol_name> <group_name>
"""
try:
fs_util = FsUtils(ceph_cluster)
config = kw.get("config")
build = config.get("build", config.get("rhbuild"))
clients = ceph_cluster.get_ceph_objects("client")
log.info("checking Pre-requisites")
if len(clients) < 2:
log.info(
f"This test requires minimum 2 client nodes.This has only {len(clients)} clients"
)
return 1
fs_util.prepare_clients(clients, build)
fs_util.auth_list(clients)
default_fs = "cephfs"
if build.startswith("4"):
# create EC pool
list_cmds = [
"ceph fs flag set enable_multiple true",
"ceph osd pool create cephfs-data-ec 64 erasure",
"ceph osd pool create cephfs-metadata 64",
"ceph osd pool set cephfs-data-ec allow_ec_overwrites true",
"ceph fs new cephfs-ec cephfs-metadata cephfs-data-ec --force",
]
if fs_util.get_fs_info(clients[0], "cephfs_new"):
default_fs = "cephfs_new"
list_cmds.append("ceph fs volume create cephfs")
for cmd in list_cmds:
clients[0].exec_command(sudo=True, cmd=cmd)
log.info("Create SubVolumeGroups on each filesystem")
subvolumegroup_list = [
{
"vol_name": default_fs,
"group_name": "subvolgroup_1"
},
{
"vol_name": "cephfs-ec",
"group_name": "subvolgroup_ec1"
},
]
for subvolumegroup in subvolumegroup_list:
fs_util.create_subvolumegroup(clients[0], **subvolumegroup)
log.info(
"Create 2 Sub volumes on each of the subvolume group with Size 2GB"
)
subvolume_list = [
{
"vol_name": default_fs,
"subvol_name": "subvol_1",
"group_name": "subvolgroup_1",
"size": "2147483648",
},
{
"vol_name": default_fs,
"subvol_name": "subvol_2",
"group_name": "subvolgroup_1",
"size": "2147483648",
},
{
"vol_name": "cephfs-ec",
"subvol_name": "subvol_3",
"group_name": "subvolgroup_ec1",
"size": "2147483648",
},
{
"vol_name": "cephfs-ec",
"subvol_name": "subvol_4",
"group_name": "subvolgroup_ec1",
"size": "2147483648",
},
]
for subvolume in subvolume_list:
fs_util.create_subvolume(clients[0], **subvolume)
log.info("Validate the Subvolume Size")
for subvolume in subvolume_list:
subvolume_size_subvol = fs_util.get_subvolume_info(
client=clients[0], **subvolume)
if int(subvolume.get("size", "infinite")) != int(
subvolume_size_subvol["bytes_quota"]):
log.error(
f"Size mismatchiing for {subvolume.get('subvol_name')} "
f"Expected size is : {subvolume.get('size', 'infinite')}"
f"Actual Size: {subvolume_size_subvol['bytes_quota']}")
return 1
mounting_dir = "".join(
random.choice(string.ascii_lowercase + string.digits)
for _ in list(range(10)))
log.info(
"Mount 1 subvolumegroup/subvolume on kernel and 1 subvloume on Fuse → Client1"
)
kernel_mounting_dir_1 = f"/mnt/cephfs_kernel{mounting_dir}_1/"
mon_node_ips = fs_util.get_mon_node_ips()
log.info("Get the path of sub volume")
subvol_path, rc = clients[0].exec_command(
sudo=True,
cmd=
f"ceph fs subvolume getpath {default_fs} subvol_1 subvolgroup_1",
)
fs_util.kernel_mount(
[clients[0]],
kernel_mounting_dir_1,
",".join(mon_node_ips),
sub_dir=f"{subvol_path.read().decode().strip()}",
)
subvol_path, rc = clients[0].exec_command(
sudo=True,
cmd=
f"ceph fs subvolume getpath {default_fs} subvol_2 subvolgroup_1",
)
fuse_mounting_dir_1 = f"/mnt/cephfs_fuse{mounting_dir}_1/"
fs_util.fuse_mount(
[clients[0]],
fuse_mounting_dir_1,
extra_params=f" -r {subvol_path.read().decode().strip()}",
)
log.info(
"On EC,Mount 1 subvolumegroup/subvolume on kernal and 1 subvloume on Fuse → Client2"
)
if build.startswith("5"):
kernel_mounting_dir_2 = f"/mnt/cephfs_kernel{mounting_dir}_EC_1/"
mon_node_ips = fs_util.get_mon_node_ips()
log.info("Get the path of sub volume")
subvol_path, rc = clients[1].exec_command(
sudo=True,
cmd=
"ceph fs subvolume getpath cephfs-ec subvol_3 subvolgroup_ec1",
)
fs_util.kernel_mount(
[clients[1]],
kernel_mounting_dir_2,
",".join(mon_node_ips),
sub_dir=f"{subvol_path.read().decode().strip()}",
extra_params=",fs=cephfs-ec",
)
subvol_path, rc = clients[0].exec_command(
sudo=True,
cmd=
"ceph fs subvolume getpath cephfs-ec subvol_4 subvolgroup_ec1",
)
fuse_mounting_dir_2 = f"/mnt/cephfs_fuse{mounting_dir}_EC_1/"
fs_util.fuse_mount(
[clients[1]],
fuse_mounting_dir_2,
extra_params=
f" -r {subvol_path.read().decode().strip()} --client_fs cephfs-ec",
)
run_ios(
clients[0],
kernel_mounting_dir_1,
file_name="dd_before",
bs="100M",
count=20,
)
run_ios(clients[0],
fuse_mounting_dir_1,
file_name="dd_before",
bs="100M",
count=20)
run_ios(
clients[1],
kernel_mounting_dir_2,
file_name="dd_before",
bs="100M",
count=20,
)
run_ios(clients[1],
fuse_mounting_dir_2,
file_name="dd_before",
bs="100M",
count=20)
log.info("Resize the subvolumes to 5GB and add data more than 2GB")
resize_subvolumes = [
f"ceph fs subvolume resize {default_fs} subvol_1 5368709120 --group_name subvolgroup_1",
f"ceph fs subvolume resize {default_fs} subvol_2 5368709120 --group_name subvolgroup_1",
"ceph fs subvolume resize cephfs-ec subvol_3 5368709120 --group_name subvolgroup_ec1",
"ceph fs subvolume resize cephfs-ec subvol_4 5368709120 --group_name subvolgroup_ec1",
]
for cmd in resize_subvolumes:
clients[0].exec_command(sudo=True, cmd=cmd)
log.info("Validate the Subvolume after Resize")
for subvolume in subvolume_list:
subvolume_size_subvol = fs_util.get_subvolume_info(
client=clients[0], **subvolume)
if 5368709120 != int(subvolume_size_subvol["bytes_quota"]):
log.error(
f"Size mismatchiing for {subvolume.get('subvol_name')} Expected size is : 5368709120"
f"Actual Size: {subvolume_size_subvol['bytes_quota']}")
return 1
run_ios(clients[0],
kernel_mounting_dir_1,
file_name="dd_after",
bs="100M",
count=30)
run_ios(clients[0],
fuse_mounting_dir_1,
file_name="dd_after",
bs="100M",
count=30)
run_ios(clients[1],
kernel_mounting_dir_2,
file_name="dd_after",
bs="100M",
count=30)
run_ios(clients[1],
fuse_mounting_dir_2,
file_name="dd_after",
bs="100M",
count=30)
log.info("Clean up the system")
fs_util.client_clean_up("umount",
kernel_clients=[clients[0]],
mounting_dir=kernel_mounting_dir_1)
fs_util.client_clean_up("umount",
kernel_clients=[clients[1]],
mounting_dir=kernel_mounting_dir_2)
fs_util.client_clean_up("umount",
fuse_clients=[clients[0]],
mounting_dir=fuse_mounting_dir_1)
fs_util.client_clean_up("umount",
fuse_clients=[clients[1]],
mounting_dir=fuse_mounting_dir_2)
clients[1].exec_command(
sudo=True, cmd="ceph config set mon mon_allow_pool_delete true")
for subvolume in subvolume_list:
fs_util.remove_subvolume(clients[0], **subvolume)
for subvolumegroup in subvolumegroup_list:
fs_util.remove_subvolumegroup(clients[0], **subvolumegroup)
return 0
except Exception as e:
log.info(e)
log.info(traceback.format_exc())
return 1
def run(ceph_cluster, **kw):
"""
Test Cases Covered:
CEPH-83573420 Try writing the data to snap directory
Pre-requisites :
1. We need atleast one client node to execute this test case
1. creats fs volume create cephfs if the volume is not there
2. ceph fs subvolumegroup create <vol_name> <group_name> --pool_layout <data_pool_name>
Ex : ceph fs subvolumegroup create cephfs subvolgroup_write_snapshot_1
3. ceph fs subvolume create <vol_name> <subvol_name> [--size <size_in_bytes>] [--group_name <subvol_group_name>]
[--pool_layout <data_pool_name>] [--uid <uid>] [--gid <gid>] [--mode <octal_mode>] [--namespace-isolated]
Ex: ceph fs subvolume create cephfs subvol_2 --size 5368706371 --group_name subvolgroup_
Script Flow:
1. Mount the subvolume on the client using Kernel
2. Write data into the mount point
3. Try creating directory and file inside the mount_point/.snap directory(CEPH-83573420)
"""
try:
fs_util = FsUtils(ceph_cluster)
config = kw.get("config")
clients = ceph_cluster.get_ceph_objects("client")
build = config.get("build", config.get("rhbuild"))
fs_util.prepare_clients(clients, build)
fs_util.auth_list(clients)
log.info("checking Pre-requisites")
if len(clients) < 1:
log.info(
f"This test requires minimum 1 client nodes.This has only {len(clients)} clients"
)
return 1
default_fs = "cephfs"
mounting_dir = "".join(
random.choice(string.ascii_lowercase + string.digits)
for _ in list(range(10)))
client1 = clients[0]
fs_details = fs_util.get_fs_info(client1)
if not fs_details:
fs_util.create_fs(client1, "cephfs")
subvolumegroup_list = [
{
"vol_name": default_fs,
"group_name": "subvolgroup_write_snapshot_1"
},
]
for subvolumegroup in subvolumegroup_list:
fs_util.create_subvolumegroup(client1, **subvolumegroup)
subvolume = {
"vol_name": default_fs,
"subvol_name": "subvol_write_snapshot",
"group_name": "subvolgroup_write_snapshot_1",
"size": "5368706371",
}
fs_util.create_subvolume(client1, **subvolume)
log.info("Get the path of sub volume")
subvol_path, rc = client1.exec_command(
sudo=True,
cmd=
f"ceph fs subvolume getpath {default_fs} subvol_write_snapshot subvolgroup_write_snapshot_1",
)
kernel_mounting_dir_1 = f"/mnt/cephfs_kernel{mounting_dir}_1/"
mon_node_ips = fs_util.get_mon_node_ips()
fs_util.kernel_mount(
[clients[0]],
kernel_mounting_dir_1,
",".join(mon_node_ips),
sub_dir=f"{subvol_path.read().decode().strip()}",
)
fs_util.create_file_data(client1, kernel_mounting_dir_1, 3, "snap1",
"snap_1_data ")
snapshot = {
"vol_name": default_fs,
"subvol_name": "subvol_write_snapshot",
"snap_name": "snap_1",
"group_name": "subvolgroup_write_snapshot_1",
}
fs_util.create_snapshot(client1, **snapshot)
out, rc = client1.exec_command(
sudo=True,
cmd=f"mkdir /mnt/cephfs_kernel{mounting_dir}_1/.snap/test",
check_ec=False,
)
if rc == 0:
raise CommandFailed("Mkdir is working in .snap directory")
out, rc = client1.exec_command(
sudo=True,
cmd=f"touch /mnt/cephfs_kernel{mounting_dir}_1/.snap/test",
check_ec=False,
)
if rc == 0:
raise CommandFailed("touch is working in .snap directory")
return 0
except Exception as e:
log.info(e)
log.info(traceback.format_exc())
return 1
finally:
log.info("Clean Up in progess")
fs_util.remove_snapshot(client1, **snapshot)
fs_util.remove_subvolume(client1, **subvolume)
def run(ceph_cluster, **kw):
"""
Test Cases Covered:
CEPH-83573255 Try renaming the snapshot directory and rollbackCreate a FS and
create 10 directories and mount them on kernel client and fuse client(5 mounts each)
Add data (~ 100 GB). Create a Snapshot and verify the content in snap directory.
Try modifying the snapshot name.
Pre-requisites :
1. We need atleast one client node to execute this test case
2. creats fs volume create cephfs if the volume is not there
3. ceph fs subvolumegroup create <vol_name> <group_name> --pool_layout <data_pool_name>
Ex : ceph fs subvolumegroup create cephfs subvol_rename_sanp_1
4. ceph fs subvolume create <vol_name> <subvol_name> [--size <size_in_bytes>] [--group_name <subvol_group_name>]
[--pool_layout <data_pool_name>] [--uid <uid>] [--gid <gid>] [--mode <octal_mode>] [--namespace-isolated]
Ex: ceph fs subvolume create cephfs subvol_2 --size 5368706371 --group_name subvolgroup_
5. Create snapshot of the subvolume
Ex: ceph fs subvolume snapshot create cephfs subvol_2 snap_1 --group_name subvol_rename_sanp_1
Script Flow:
1. Mount the subvolume on the client using fuse mount.
2. Rename the snapshot snap/_snap_1 to snap/_snap_rename.
"""
try:
fs_util = FsUtils(ceph_cluster)
config = kw.get("config")
clients = ceph_cluster.get_ceph_objects("client")
build = config.get("build", config.get("rhbuild"))
fs_util.prepare_clients(clients, build)
fs_util.auth_list(clients)
log.info("checking Pre-requisites")
if len(clients) < 1:
log.info(
f"This test requires minimum 1 client nodes.This has only {len(clients)} clients"
)
return 1
default_fs = "cephfs"
mounting_dir = "".join(
random.choice(string.ascii_lowercase + string.digits)
for _ in list(range(10)))
client1 = clients[0]
fs_details = fs_util.get_fs_info(client1)
if not fs_details:
fs_util.create_fs(client1, "cephfs")
subvolumegroup_list = [
{
"vol_name": default_fs,
"group_name": "subvol_rename_sanp_1"
},
]
for subvolumegroup in subvolumegroup_list:
fs_util.create_subvolumegroup(client1, **subvolumegroup)
subvolume = {
"vol_name": default_fs,
"subvol_name": "subvol_rename_sanp",
"group_name": "subvol_rename_sanp_1",
"size": "5368706371",
}
fs_util.create_subvolume(client1, **subvolume)
log.info("Get the path of sub volume")
subvol_path, rc = client1.exec_command(
sudo=True,
cmd=
f"ceph fs subvolume getpath {default_fs} subvol_rename_sanp subvol_rename_sanp_1",
)
subvol_path = subvol_path.read().decode().strip()
fuse_mounting_dir_1 = f"/mnt/cephfs_fuse{mounting_dir}_1/"
fs_util.fuse_mount(
[client1],
fuse_mounting_dir_1,
extra_params=f" -r {subvol_path}",
)
fs_util.create_file_data(client1, fuse_mounting_dir_1, 3, "snap1",
"data_from_fuse_mount ")
fuse_snapshot = {
"vol_name": default_fs,
"subvol_name": "subvol_rename_sanp",
"snap_name": "snap_1",
"group_name": "subvol_rename_sanp_1",
}
fs_util.create_snapshot(client1, **fuse_snapshot)
out, rc = client1.exec_command(
sudo=True,
cmd=
f"cd {fuse_mounting_dir_1};mv .snap/_snap_1_* .snap/_snap_rename_",
check_ec=False,
)
if rc == 0:
raise CommandFailed(
"we are able to rename the snap directory.. which is not correct"
)
return 0
except Exception as e:
log.info(e)
log.info(traceback.format_exc())
return 1
finally:
log.info("Clean Up in progess")
fs_util.remove_snapshot(client1, **fuse_snapshot)
fs_util.remove_subvolume(client1, **subvolume)
for subvolumegroup in subvolumegroup_list:
fs_util.remove_subvolumegroup(client1,
**subvolumegroup,
force=True)
def run(ceph_cluster, **kw):
"""
Pre-requisites :
1. We need atleast one client node to execute this test case
1. creats fs volume create cephfs if the volume is not there
2. ceph fs subvolumegroup create <vol_name> <group_name> --pool_layout <data_pool_name>
Ex : ceph fs subvolumegroup create cephfs subvolgroup_1
3. ceph fs subvolume create <vol_name> <subvol_name> [--size <size_in_bytes>] [--group_name <subvol_group_name>]
[--pool_layout <data_pool_name>] [--uid <uid>] [--gid <gid>] [--mode <octal_mode>] [--namespace-isolated]
Ex: ceph fs subvolume create cephfs subvol_2 --size 5368706371 --group_name subvolgroup_
4. Create Data on the subvolume
Ex: python3 /home/cephuser/smallfile/smallfile_cli.py --operation create --threads 10 --file-size 400 --files
100 --files-per-dir 10 --dirs-per-dir 2 --top /mnt/cephfs_fuse1baxgbpaia_1/
5. Create snapshot of the subvolume
Ex: ceph fs subvolume snapshot create cephfs subvol_2 snap_1 --group_name subvolgroup_1
Concurrent Clone Operations:
1. Validate default value foe the clones i.e., 4
2. Create 5 clones of the snap_1
Ex: ceph fs subvolume snapshot clone cephfs subvol_2 snap_1 clone_1 --group_name subvolgroup_1
ceph fs subvolume snapshot clone cephfs subvol_2 snap_1 clone_2 --group_name subvolgroup_1
ceph fs subvolume snapshot clone cephfs subvol_2 snap_1 clone_3 --group_name subvolgroup_1
ceph fs subvolume snapshot clone cephfs subvol_2 snap_1 clone_4 --group_name subvolgroup_1
ceph fs subvolume snapshot clone cephfs subvol_2 snap_1 clone_5 --group_name subvolgroup_1
3. Get the status of each clone using below command
Ex: ceph fs clone status cephfs clone_1
ceph fs clone status cephfs clone_2
ceph fs clone status cephfs clone_3
ceph fs clone status cephfs clone_4
ceph fs clone status cephfs clone_5
4. We are validating the total clones in_progress should not be greater than 4
5. Once all the clones moved to complete state we are deleting all the clones
6. Set the concurrent threads to 2
Ex: ceph config set mgr mgr/volumes/max_concurrent_clones 2
7. Create 5 clones of the snap_1
Ex: ceph fs subvolume snapshot clone cephfs subvol_2 snap_1 clone_1 --group_name subvolgroup_1
ceph fs subvolume snapshot clone cephfs subvol_2 snap_1 clone_2 --group_name subvolgroup_1
ceph fs subvolume snapshot clone cephfs subvol_2 snap_1 clone_3 --group_name subvolgroup_1
ceph fs subvolume snapshot clone cephfs subvol_2 snap_1 clone_4 --group_name subvolgroup_1
ceph fs subvolume snapshot clone cephfs subvol_2 snap_1 clone_5 --group_name subvolgroup_1
8. Get the status of each clone using below command
Ex: ceph fs clone status cephfs clone_1
ceph fs clone status cephfs clone_2
ceph fs clone status cephfs clone_3
ceph fs clone status cephfs clone_4
ceph fs clone status cephfs clone_5
9. We are validating the total clones in_progress should not be greater than 2
10.Once all the clones moved to complete state we are deleting all the clones
Clean-up:
1. ceph fs snapshot rm <vol_name> <subvol_name> snap_name [--group_name <subvol_group_name>]
2. ceph fs subvolume rm <vol_name> <subvol_name> [--group_name <subvol_group_name>]
3. ceph fs subvolumegroup rm <vol_name> <group_name>
"""
try:
fs_util = FsUtils(ceph_cluster)
config = kw.get("config")
clients = ceph_cluster.get_ceph_objects("client")
build = config.get("build", config.get("rhbuild"))
fs_util.prepare_clients(clients, build)
fs_util.auth_list(clients)
log.info("checking Pre-requisites")
if len(clients) < 1:
log.info(
f"This test requires minimum 1 client nodes.This has only {len(clients)} clients"
)
return 1
default_fs = "cephfs"
mounting_dir = "".join(
random.choice(string.ascii_lowercase + string.digits)
for _ in list(range(10))
)
client1 = clients[0]
fs_details = fs_util.get_fs_info(client1)
if not fs_details:
fs_util.create_fs(client1, "cephfs")
subvolumegroup = {"vol_name": default_fs, "group_name": "subvolgroup_1"}
fs_util.create_subvolumegroup(client1, **subvolumegroup)
subvolume = {
"vol_name": default_fs,
"subvol_name": "subvol_2",
"group_name": "subvolgroup_1",
"size": "5368706371",
}
fs_util.create_subvolume(client1, **subvolume)
log.info("Get the path of sub volume")
subvol_path, rc = client1.exec_command(
sudo=True,
cmd=f"ceph fs subvolume getpath {default_fs} subvol_2 subvolgroup_1",
)
fuse_mounting_dir_1 = f"/mnt/cephfs_fuse{mounting_dir}_1/"
fs_util.fuse_mount(
[client1],
fuse_mounting_dir_1,
extra_params=f" -r {subvol_path.strip()}",
)
client1.exec_command(
sudo=True,
cmd=f"python3 /home/cephuser/smallfile/smallfile_cli.py --operation create --threads 10 --file-size 400 "
f"--files 100 --files-per-dir 10 --dirs-per-dir 2 --top "
f"{fuse_mounting_dir_1}",
long_running=True,
)
snapshot = {
"vol_name": default_fs,
"subvol_name": "subvol_2",
"snap_name": "snap_1",
"group_name": "subvolgroup_1",
}
fs_util.create_snapshot(client1, **snapshot)
clone_list = [
{
"vol_name": default_fs,
"subvol_name": "subvol_2",
"snap_name": "snap_1",
"target_subvol_name": f"clone_{x}",
"group_name": "subvolgroup_1",
}
for x in range(1, 6)
]
with parallel() as p:
for clone in clone_list:
p.spawn(fs_util.create_clone, client1, **clone, validate=False)
status_list = []
iteration = 0
while status_list.count("complete") < len(clone_list):
status_list.clear()
iteration += 1
for clone in clone_list:
cmd_out, cmd_rc = fs_util.get_clone_status(
client1, clone["vol_name"], clone["target_subvol_name"]
)
status = json.loads(cmd_out)
status_list.append(status["status"]["state"])
log.info(
f"{clone['target_subvol_name']} status is {status['status']['state']}"
)
if status_list.count("in-progress") > 4:
return 1
else:
log.info(
f"cloneing is in progress for {status_list.count('in-progress')} out of {len(clone_list)}"
)
log.info(f"Iteration {iteration} has been completed")
rmclone_list = [
{"vol_name": default_fs, "subvol_name": f"clone_{x}"} for x in range(1, 6)
]
for clonevolume in rmclone_list:
fs_util.remove_subvolume(client1, **clonevolume)
log.info("Set clone threads to 2 and verify only 2 clones are in progress")
client1.exec_command(
sudo=True, cmd="ceph config set mgr mgr/volumes/max_concurrent_clones 2"
)
for clone in clone_list:
fs_util.create_clone(client1, **clone)
status_list = []
iteration = 0
while status_list.count("complete") < len(clone_list):
iteration += 1
status_list.clear()
for clone in clone_list:
cmd_out, cmd_rc = fs_util.get_clone_status(
client1, clone["vol_name"], clone["target_subvol_name"]
)
status = json.loads(cmd_out)
status_list.append(status["status"]["state"])
log.info(
f"{clone['target_subvol_name']} status is {status['status']['state']}"
)
if status_list.count("in-progress") > 2:
return 1
else:
log.info(
f"cloneing is in progress for {status_list.count('in-progress')} out of {len(clone_list)}"
)
log.info(f"Iteration {iteration} has been completed")
for clonevolume in rmclone_list:
fs_util.remove_subvolume(client1, **clonevolume)
log.info("Clean Up in progess")
fs_util.remove_snapshot(client1, **snapshot)
fs_util.remove_subvolume(client1, **subvolume)
return 0
except Exception as e:
log.info(e)
log.info(traceback.format_exc())
return 1
def run(ceph_cluster, **kw):
"""
Test Cases Covered:
CEPH-83573502 Interrupt the cloning operation in-between and observe the behavior..
Pre-requisites :
1. We need atleast one client node to execute this test case
1. creats fs volume create cephfs if the volume is not there
2. Create 1 sub volume groups
Ex : ceph fs subvolumegroup create cephfs subvolgroup_1
3. ceph fs subvolume create <vol_name> <subvol_name> [--size <size_in_bytes>] [--group_name <subvol_group_name>]
[--pool_layout <data_pool_name>] [--uid <uid>] [--gid <gid>] [--mode <octal_mode>] [--namespace-isolated]
Ex: ceph fs subvolume create cephfs subvol_clone_cancel --size 5368706371 --group_name subvolgroup_
4. Create Data on the subvolume
Ex: python3 /home/cephuser/smallfile/smallfile_cli.py --operation create --threads 10 --file-size 400 --files
100 --files-per-dir 10 --dirs-per-dir 2 --top /mnt/cephfs_fuse1baxgbpaia_1/
5. Create snapshot of the subvolume
Ex: ceph fs subvolume snapshot create cephfs subvol_clone_cancel snap_1 --group_name subvolgroup_1
Clone Operations and Clone States:
1. Create a clone in default locaction.
ceph fs subvolume snapshot clone cephfs subvol_clone_cancel snap_1 clone_status_1 --group_name subvolgroup_1
2. Create a clone and Cancel the Operation and check the state is in "canceled".
3. Clone state should move to canceled state
Clean-up:
1. ceph fs snapshot rm <vol_name> <subvol_name> snap_name [--group_name <subvol_group_name>]
2. ceph fs subvolume rm <vol_name> <subvol_name> [--group_name <subvol_group_name>]
3. ceph fs subvolumegroup rm <vol_name> <group_name>
"""
try:
fs_util = FsUtils(ceph_cluster)
config = kw.get("config")
clients = ceph_cluster.get_ceph_objects("client")
build = config.get("build", config.get("rhbuild"))
fs_util.prepare_clients(clients, build)
fs_util.auth_list(clients)
log.info("checking Pre-requisites")
if len(clients) < 1:
log.info(
f"This test requires minimum 1 client nodes.This has only {len(clients)} clients"
)
return 1
default_fs = "cephfs"
mounting_dir = "".join(
random.choice(string.ascii_lowercase + string.digits)
for _ in list(range(10)))
client1 = clients[0]
fs_details = fs_util.get_fs_info(client1)
if not fs_details:
fs_util.create_fs(client1, "cephfs")
subvolumegroup_list = [{
"vol_name": default_fs,
"group_name": "subvolgroup_clone_cancel_1"
}]
for subvolumegroup in subvolumegroup_list:
fs_util.create_subvolumegroup(client1, **subvolumegroup)
subvolume = {
"vol_name": default_fs,
"subvol_name": "subvol_clone_cancel",
"group_name": "subvolgroup_clone_cancel_1",
"size": "5368706371",
}
fs_util.create_subvolume(client1, **subvolume)
log.info("Get the path of sub volume")
subvol_path, rc = client1.exec_command(
sudo=True,
cmd=
f"ceph fs subvolume getpath {default_fs} subvol_clone_cancel subvolgroup_clone_cancel_1",
)
kernel_mounting_dir_1 = f"/mnt/cephfs_kernel{mounting_dir}_1/"
mon_node_ips = fs_util.get_mon_node_ips()
fs_util.kernel_mount(
[clients[0]],
kernel_mounting_dir_1,
",".join(mon_node_ips),
sub_dir=f"{subvol_path.read().decode().strip()}",
)
client1.exec_command(
sudo=True,
cmd=
f"python3 /home/cephuser/smallfile/smallfile_cli.py --operation create --threads 10 --file-size 400 "
f"--files 100 --files-per-dir 10 --dirs-per-dir 2 --top "
f"{kernel_mounting_dir_1}",
long_running=True,
)
snapshot = {
"vol_name": default_fs,
"subvol_name": "subvol_clone_cancel",
"snap_name": "snap_1",
"group_name": "subvolgroup_clone_cancel_1",
}
fs_util.create_snapshot(client1, **snapshot)
clone_status_3 = {
"vol_name": default_fs,
"subvol_name": "subvol_clone_cancel",
"snap_name": "snap_1",
"target_subvol_name": "clone_status_3",
"group_name": "subvolgroup_clone_cancel_1",
}
fs_util.create_clone(client1, **clone_status_3)
fs_util.clone_cancel(
client1,
clone_status_3["vol_name"],
clone_status_3["target_subvol_name"],
group_name=clone_status_3.get("target_group_name", ""),
)
fs_util.validate_clone_state(client1, clone_status_3, "canceled")
return 0
except Exception as e:
log.info(e)
log.info(traceback.format_exc())
return 1
finally:
log.info("Clean Up in progess")
rmclone_list = [
{
"vol_name": default_fs,
"subvol_name": "clone_status_3",
"force": True
},
]
for clone_vol in rmclone_list:
fs_util.remove_subvolume(client1, **clone_vol)
fs_util.remove_snapshot(client1, **snapshot)
fs_util.remove_subvolume(client1, **subvolume)
for subvolumegroup in subvolumegroup_list:
fs_util.remove_subvolumegroup(client1,
**subvolumegroup,
force=True)
