def initGui(self):
if not valid:
return
if int(self.QgisVersion) < 1:
QMessageBox.warning(
self.iface.getMainWindow(), "Gdal Tools",
QCoreApplication.translate("GdalTools",
"QGIS version detected: ") +
unicode(self.QgisVersion) + ".xx\n" +
QCoreApplication.translate(
"GdalTools",
"This version of Gdal Tools requires at least QGIS version 1.0.0\nPlugin will not be enabled."
))
return None
from tools.GdalTools_utils import GdalConfig, LayerRegistry
self.GdalVersionNum = GdalConfig.versionNum()
LayerRegistry.setIface(self.iface)
# find the Raster menu
rasterMenu = None
menu_bar = self.iface.mainWindow().menuBar()
actions = menu_bar.actions()
rasterText = QCoreApplication.translate("QgisApp", "&Raster")
for a in actions:
if a.menu() is not None and a.menu().title() == rasterText:
rasterMenu = a.menu()
break
if rasterMenu is None:
# no Raster menu, create and insert it before the Help menu
self.menu = QMenu(rasterText, self.iface.mainWindow())
lastAction = actions[len(actions) - 1]
menu_bar.insertMenu(lastAction, self.menu)
else:
self.menu = rasterMenu
self.menu.addSeparator()
# projections menu (Warp (Reproject), Assign projection)
self.projectionsMenu = QMenu(
QCoreApplication.translate("GdalTools", "Projections"),
self.iface.mainWindow())
self.projectionsMenu.setObjectName("projectionsMenu")
self.warp = QAction(
QIcon(":/icons/warp.png"),
QCoreApplication.translate("GdalTools", "Warp (Reproject)..."),
self.iface.mainWindow())
self.warp.setObjectName("warp")
self.warp.setStatusTip(
QCoreApplication.translate(
"GdalTools", "Warp an image into a new coordinate system"))
QObject.connect(self.warp, SIGNAL("triggered()"), self.doWarp)
self.projection = QAction(
QIcon(":icons/projection-add.png"),
QCoreApplication.translate("GdalTools", "Assign Projection..."),
self.iface.mainWindow())
self.projection.setObjectName("projection")
self.projection.setStatusTip(
QCoreApplication.translate("GdalTools",
"Add projection info to the raster"))
QObject.connect(self.projection, SIGNAL("triggered()"),
self.doProjection)
self.extractProj = QAction(
QIcon(":icons/projection-export.png"),
QCoreApplication.translate("GdalTools", "Extract Projection..."),
self.iface.mainWindow())
self.extractProj.setObjectName("extractProj")
self.extractProj.setStatusTip(
QCoreApplication.translate(
"GdalTools", "Extract projection information from raster(s)"))
QObject.connect(self.extractProj, SIGNAL("triggered()"),
self.doExtractProj)
self.projectionsMenu.addActions(
[self.warp, self.projection, self.extractProj])
# conversion menu (Rasterize (Vector to raster), Polygonize (Raster to vector), Translate, RGB to PCT, PCT to RGB)
self.conversionMenu = QMenu(
QCoreApplication.translate("GdalTools", "Conversion"),
self.iface.mainWindow())
self.conversionMenu.setObjectName("conversionMenu")
if self.GdalVersionNum >= 1300:
self.rasterize = QAction(
QIcon(":/icons/rasterize.png"),
QCoreApplication.translate("GdalTools",
"Rasterize (Vector to Raster)..."),
self.iface.mainWindow())
self.rasterize.setObjectName("rasterize")
self.rasterize.setStatusTip(
QCoreApplication.translate(
"GdalTools", "Burns vector geometries into a raster"))
QObject.connect(self.rasterize, SIGNAL("triggered()"),
self.doRasterize)
self.conversionMenu.addAction(self.rasterize)
if self.GdalVersionNum >= 1600:
self.polygonize = QAction(
QIcon(":/icons/polygonize.png"),
QCoreApplication.translate("GdalTools",
"Polygonize (Raster to Vector)..."),
self.iface.mainWindow())
self.polygonize.setObjectName("polygonize")
self.polygonize.setStatusTip(
QCoreApplication.translate(
"GdalTools",
"Produces a polygon feature layer from a raster"))
QObject.connect(self.polygonize, SIGNAL("triggered()"),
self.doPolygonize)
self.conversionMenu.addAction(self.polygonize)
self.translate = QAction(
QIcon(":/icons/translate.png"),
QCoreApplication.translate("GdalTools",
"Translate (Convert Format)..."),
self.iface.mainWindow())
self.translate.setObjectName("translate")
self.translate.setStatusTip(
QCoreApplication.translate(
"GdalTools", "Converts raster data between different formats"))
QObject.connect(self.translate, SIGNAL("triggered()"),
self.doTranslate)
self.paletted = QAction(
QIcon(":icons/24-to-8-bits.png"),
QCoreApplication.translate("GdalTools", "RGB to PCT..."),
self.iface.mainWindow())
self.paletted.setObjectName("paletted")
self.paletted.setStatusTip(
QCoreApplication.translate(
"GdalTools", "Convert a 24bit RGB image to 8bit paletted"))
QObject.connect(self.paletted, SIGNAL("triggered()"), self.doPaletted)
self.rgb = QAction(
QIcon(":icons/8-to-24-bits.png"),
QCoreApplication.translate("GdalTools", "PCT to RGB..."),
self.iface.mainWindow())
self.rgb.setObjectName("rgb")
self.rgb.setStatusTip(
QCoreApplication.translate(
"GdalTools", "Convert an 8bit paletted image to 24bit RGB"))
QObject.connect(self.rgb, SIGNAL("triggered()"), self.doRGB)
self.conversionMenu.addActions(
[self.translate, self.paletted, self.rgb])
# extraction menu (Clipper, Contour)
self.extractionMenu = QMenu(
QCoreApplication.translate("GdalTools", "Extraction"),
self.iface.mainWindow())
self.extractionMenu.setObjectName("extractionMenu")
if self.GdalVersionNum >= 1600:
self.contour = QAction(
QIcon(":/icons/contour.png"),
QCoreApplication.translate("GdalTools", "Contour..."),
self.iface.mainWindow())
self.contour.setObjectName("contour")
self.contour.setStatusTip(
QCoreApplication.translate(
"GdalTools", "Builds vector contour lines from a DEM"))
QObject.connect(self.contour, SIGNAL("triggered()"),
self.doContour)
self.extractionMenu.addAction(self.contour)
self.clipper = QAction(
QIcon(":icons/raster-clip.png"),
QCoreApplication.translate("GdalTools", "Clipper..."),
self.iface.mainWindow())
self.clipper.setObjectName("clipper")
#self.clipper.setStatusTip( QCoreApplication.translate( "GdalTools", "Converts raster data between different formats") )
QObject.connect(self.clipper, SIGNAL("triggered()"), self.doClipper)
self.extractionMenu.addActions([self.clipper])
# analysis menu (DEM (Terrain model), Grid (Interpolation), Near black, Proximity (Raster distance), Sieve)
self.analysisMenu = QMenu(
QCoreApplication.translate("GdalTools", "Analysis"),
self.iface.mainWindow())
self.analysisMenu.setObjectName("analysisMenu")
if self.GdalVersionNum >= 1600:
self.sieve = QAction(
QIcon(":/icons/sieve.png"),
QCoreApplication.translate("GdalTools", "Sieve..."),
self.iface.mainWindow())
self.sieve.setObjectName("sieve")
self.sieve.setStatusTip(
QCoreApplication.translate("GdalTools",
"Removes small raster polygons"))
QObject.connect(self.sieve, SIGNAL("triggered()"), self.doSieve)
self.analysisMenu.addAction(self.sieve)
if self.GdalVersionNum >= 1500:
self.nearBlack = QAction(
QIcon(":/icons/nearblack.png"),
QCoreApplication.translate("GdalTools", "Near Black..."),
self.iface.mainWindow())
self.nearBlack.setObjectName("nearBlack")
self.nearBlack.setStatusTip(
QCoreApplication.translate(
"GdalTools",
"Convert nearly black/white borders to exact value"))
QObject.connect(self.nearBlack, SIGNAL("triggered()"),
self.doNearBlack)
self.analysisMenu.addAction(self.nearBlack)
if self.GdalVersionNum >= 1700:
self.fillNodata = QAction(
QIcon(":/icons/fillnodata.png"),
QCoreApplication.translate("GdalTools", "Fill nodata..."),
self.iface.mainWindow())
self.fillNodata.setObjectName("fillNodata")
self.fillNodata.setStatusTip(
QCoreApplication.translate(
"GdalTools",
"Fill raster regions by interpolation from edges"))
QObject.connect(self.fillNodata, SIGNAL("triggered()"),
self.doFillNodata)
self.analysisMenu.addAction(self.fillNodata)
if self.GdalVersionNum >= 1600:
self.proximity = QAction(
QIcon(":/icons/proximity.png"),
QCoreApplication.translate("GdalTools",
"Proximity (Raster Distance)..."),
self.iface.mainWindow())
self.proximity.setObjectName("proximity")
self.proximity.setStatusTip(
QCoreApplication.translate("GdalTools",
"Produces a raster proximity map"))
QObject.connect(self.proximity, SIGNAL("triggered()"),
self.doProximity)
self.analysisMenu.addAction(self.proximity)
if self.GdalVersionNum >= 1500:
self.grid = QAction(
QIcon(":/icons/grid.png"),
QCoreApplication.translate("GdalTools",
"Grid (Interpolation)..."),
self.iface.mainWindow())
self.grid.setObjectName("grid")
self.grid.setStatusTip(
QCoreApplication.translate(
"GdalTools", "Create raster from the scattered data"))
QObject.connect(self.grid, SIGNAL("triggered()"), self.doGrid)
self.analysisMenu.addAction(self.grid)
if self.GdalVersionNum >= 1700:
self.dem = QAction(
QIcon(":icons/dem.png"),
QCoreApplication.translate("GdalTools",
"DEM (Terrain Models)..."),
self.iface.mainWindow())
self.dem.setObjectName("dem")
self.dem.setStatusTip(
QCoreApplication.translate(
"GdalTools", "Tool to analyze and visualize DEMs"))
QObject.connect(self.dem, SIGNAL("triggered()"), self.doDEM)
self.analysisMenu.addAction(self.dem)
#self.analysisMenu.addActions( [ ] )
# miscellaneous menu (Build overviews (Pyramids), Tile index, Information, Merge, Build Virtual Raster (Catalog))
self.miscellaneousMenu = QMenu(
QCoreApplication.translate("GdalTools", "Miscellaneous"),
self.iface.mainWindow())
self.miscellaneousMenu.setObjectName("miscellaneousMenu")
if self.GdalVersionNum >= 1600:
self.buildVRT = QAction(
QIcon(":/icons/vrt.png"),
QCoreApplication.translate(
"GdalTools", "Build Virtual Raster (Catalog)..."),
self.iface.mainWindow())
self.buildVRT.setObjectName("buildVRT")
self.buildVRT.setStatusTip(
QCoreApplication.translate(
"GdalTools", "Builds a VRT from a list of datasets"))
QObject.connect(self.buildVRT, SIGNAL("triggered()"),
self.doBuildVRT)
self.miscellaneousMenu.addAction(self.buildVRT)
self.merge = QAction(
QIcon(":/icons/merge.png"),
QCoreApplication.translate("GdalTools", "Merge..."),
self.iface.mainWindow())
self.merge.setObjectName("merge")
self.merge.setStatusTip(
QCoreApplication.translate(
"GdalTools", "Build a quick mosaic from a set of images"))
QObject.connect(self.merge, SIGNAL("triggered()"), self.doMerge)
self.info = QAction(
QIcon(":/icons/raster-info.png"),
QCoreApplication.translate("GdalTools", "Information..."),
self.iface.mainWindow())
self.info.setObjectName("info")
self.info.setStatusTip(
QCoreApplication.translate(
"GdalTools", "Lists information about raster dataset"))
QObject.connect(self.info, SIGNAL("triggered()"), self.doInfo)
self.overview = QAction(
QIcon(":icons/raster-overview.png"),
QCoreApplication.translate("GdalTools",
"Build Overviews (Pyramids)..."),
self.iface.mainWindow())
self.overview.setObjectName("overview")
self.overview.setStatusTip(
QCoreApplication.translate("GdalTools",
"Builds or rebuilds overview images"))
QObject.connect(self.overview, SIGNAL("triggered()"), self.doOverview)
self.tileindex = QAction(
QIcon(":icons/tiles.png"),
QCoreApplication.translate("GdalTools", "Tile Index..."),
self.iface.mainWindow())
self.tileindex.setObjectName("tileindex")
self.tileindex.setStatusTip(
QCoreApplication.translate(
"GdalTools", "Build a shapefile as a raster tileindex"))
QObject.connect(self.tileindex, SIGNAL("triggered()"),
self.doTileIndex)
self.miscellaneousMenu.addActions(
[self.merge, self.info, self.overview, self.tileindex])
self.menu.addMenu(self.projectionsMenu)
self.menu.addMenu(self.conversionMenu)
self.menu.addMenu(self.extractionMenu)
if not self.analysisMenu.isEmpty():
self.menu.addMenu(self.analysisMenu)
self.menu.addMenu(self.miscellaneousMenu)
self.settings = QAction(
QCoreApplication.translate("GdalTools", "GdalTools Settings..."),
self.iface.mainWindow())
self.settings.setObjectName("settings")
self.settings.setStatusTip(
QCoreApplication.translate("GdalTools",
"Various settings for Gdal Tools"))
QObject.connect(self.settings, SIGNAL("triggered()"), self.doSettings)
self.menu.addAction(self.settings)
def initGui( self ):
if int( self.QgisVersion ) < 1:
QMessageBox.warning( self.iface.getMainWindow(), "Gdal Tools",
QCoreApplication.translate( "GdalTools", "Quantum GIS version detected: " ) +unicode( self.QgisVersion )+".xx\n"
+ QCoreApplication.translate( "GdalTools", "This version of Gdal Tools requires at least QGIS version 1.0.0\nPlugin will not be enabled." ) )
return None
from tools.GdalTools_utils import Version, GdalConfig, LayerRegistry
self.GdalVersion = Version( GdalConfig.version() )
LayerRegistry.setIface( self.iface )
# find the Raster menu
rasterMenu = None
menu_bar = self.iface.mainWindow().menuBar()
actions = menu_bar.actions()
rasterText = QCoreApplication.translate( "QgisApp", "&Raster" )
for a in actions:
if a.menu() != None and a.menu().title() == rasterText:
rasterMenu = a.menu()
break
if rasterMenu == None:
# no Raster menu, create and insert it before the Help menu
self.menu = QMenu()
self.menu.setTitle( rasterText )
lastAction = actions[ len( actions ) - 1 ]
menu_bar.insertMenu( lastAction, self.menu )
else:
self.menu = rasterMenu
self.menu.addSeparator()
# projections menu (Warp (Reproject), Assign projection)
self.projectionsMenu = QMenu( QCoreApplication.translate( "GdalTools", "Projections" ) )
self.warp = QAction( QIcon(":/icons/warp.png"), QCoreApplication.translate( "GdalTools", "Warp (Reproject)" ), self.iface.mainWindow() )
self.warp.setStatusTip( QCoreApplication.translate( "GdalTools", "Warp an image into a new coordinate system") )
QObject.connect( self.warp, SIGNAL( "triggered()" ), self.doWarp )
self.projection = QAction( QIcon( ":icons/projection-add.png" ), QCoreApplication.translate( "GdalTools", "Assign projection" ), self.iface.mainWindow() )
self.projection.setStatusTip( QCoreApplication.translate( "GdalTools", "Add projection info to the raster" ) )
QObject.connect( self.projection, SIGNAL( "triggered()" ), self.doProjection )
self.extractProj = QAction( QIcon( ":icons/projection-export.png" ), QCoreApplication.translate( "GdalTools", "Extract projection" ), self.iface.mainWindow() )
self.extractProj.setStatusTip( QCoreApplication.translate( "GdalTools", "Extract projection information from raster(s)" ) )
QObject.connect( self.extractProj, SIGNAL( "triggered()" ), self.doExtractProj )
self.projectionsMenu.addActions( [ self.warp, self.projection, self.extractProj ] )
# conversion menu (Rasterize (Vector to raster), Polygonize (Raster to vector), Translate, RGB to PCT, PCT to RGB)
self.conversionMenu = QMenu( QCoreApplication.translate( "GdalTools", "Conversion" ) )
if self.GdalVersion >= "1.3":
self.rasterize = QAction( QIcon(":/icons/rasterize.png"), QCoreApplication.translate( "GdalTools", "Rasterize (Vector to raster)" ), self.iface.mainWindow() )
self.rasterize.setStatusTip( QCoreApplication.translate( "GdalTools", "Burns vector geometries into a raster") )
QObject.connect( self.rasterize, SIGNAL( "triggered()" ), self.doRasterize )
self.conversionMenu.addAction( self.rasterize )
if self.GdalVersion >= "1.6":
self.polygonize = QAction( QIcon(":/icons/polygonize.png"), QCoreApplication.translate( "GdalTools", "Polygonize (Raster to vector)" ), self.iface.mainWindow() )
self.polygonize.setStatusTip( QCoreApplication.translate( "GdalTools", "Produces a polygon feature layer from a raster") )
QObject.connect( self.polygonize, SIGNAL( "triggered()" ), self.doPolygonize )
self.conversionMenu.addAction( self.polygonize )
self.translate = QAction( QIcon(":/icons/translate.png"), QCoreApplication.translate( "GdalTools", "Translate (Convert format)" ), self.iface.mainWindow() )
self.translate.setStatusTip( QCoreApplication.translate( "GdalTools", "Converts raster data between different formats") )
QObject.connect( self.translate, SIGNAL( "triggered()" ), self.doTranslate )
self.paletted = QAction( QIcon( ":icons/24-to-8-bits.png" ), QCoreApplication.translate( "GdalTools", "RGB to PCT" ), self.iface.mainWindow() )
self.paletted.setStatusTip( QCoreApplication.translate( "GdalTools", "Convert a 24bit RGB image to 8bit paletted" ) )
QObject.connect( self.paletted, SIGNAL( "triggered()" ), self.doPaletted )
self.rgb = QAction( QIcon( ":icons/8-to-24-bits.png" ), QCoreApplication.translate( "GdalTools", "PCT to RGB" ), self.iface.mainWindow() )
self.rgb.setStatusTip( QCoreApplication.translate( "GdalTools", "Convert an 8bit paletted image to 24bit RGB" ) )
QObject.connect( self.rgb, SIGNAL( "triggered()" ), self.doRGB )
self.conversionMenu.addActions( [ self.translate, self.paletted, self.rgb ] )
# extraction menu (Clipper, Contour)
self.extractionMenu = QMenu( QCoreApplication.translate( "GdalTools", "Extraction" ) )
if self.GdalVersion >= "1.6":
self.contour = QAction( QIcon(":/icons/contour.png"), QCoreApplication.translate( "GdalTools", "Contour" ), self.iface.mainWindow() )
self.contour.setStatusTip( QCoreApplication.translate( "GdalTools", "Builds vector contour lines from a DEM") )
QObject.connect( self.contour, SIGNAL( "triggered()" ), self.doContour )
self.extractionMenu.addAction( self.contour )
self.clipper = QAction( QIcon( ":icons/raster-clip.png" ), QCoreApplication.translate( "GdalTools", "Clipper" ), self.iface.mainWindow() )
#self.clipper.setStatusTip( QCoreApplication.translate( "GdalTools", "Converts raster data between different formats") )
QObject.connect( self.clipper, SIGNAL( "triggered()" ), self.doClipper )
self.extractionMenu.addActions( [ self.clipper ] )
# analysis menu (DEM (Terrain model), Grid (Interpolation), Near black, Proximity (Raster distance), Sieve)
self.analysisMenu = QMenu( QCoreApplication.translate( "GdalTools", "Analysis" ) )
if self.GdalVersion >= "1.6":
self.sieve = QAction( QIcon(":/icons/sieve.png"), QCoreApplication.translate( "GdalTools", "Sieve" ), self.iface.mainWindow() )
self.sieve.setStatusTip( QCoreApplication.translate( "GdalTools", "Removes small raster polygons") )
QObject.connect( self.sieve, SIGNAL( "triggered()" ), self.doSieve )
self.analysisMenu.addAction( self.sieve )
if self.GdalVersion >= "1.5":
self.nearBlack = QAction( QIcon(":/icons/nearblack.png"), QCoreApplication.translate( "GdalTools", "Near black" ), self.iface.mainWindow() )
self.nearBlack.setStatusTip( QCoreApplication.translate( "GdalTools", "Convert nearly black/white borders to exact value") )
QObject.connect( self.nearBlack, SIGNAL( "triggered()" ), self.doNearBlack )
self.analysisMenu.addAction( self.nearBlack )
if self.GdalVersion >= "1.7":
self.fillNodata = QAction( QIcon(":/icons/fillnodata.png"), QCoreApplication.translate( "GdalTools", "Fill nodata" ), self.iface.mainWindow() )
self.fillNodata.setStatusTip( QCoreApplication.translate( "GdalTools", "Fill raster regions by interpolation from edges") )
QObject.connect( self.fillNodata, SIGNAL( "triggered()" ), self.doFillNodata )
self.analysisMenu.addAction( self.fillNodata )
if self.GdalVersion >= "1.6":
self.proximity = QAction( QIcon(":/icons/proximity.png"), QCoreApplication.translate( "GdalTools", "Proximity (Raster distance)" ), self.iface.mainWindow() )
self.proximity.setStatusTip( QCoreApplication.translate( "GdalTools", "Produces a raster proximity map") )
QObject.connect( self.proximity, SIGNAL( "triggered()" ), self.doProximity )
self.analysisMenu.addAction( self.proximity )
if self.GdalVersion >= "1.5":
self.grid = QAction( QIcon(":/icons/grid.png"), QCoreApplication.translate( "GdalTools", "Grid (Interpolation)" ), self.iface.mainWindow() )
self.grid.setStatusTip( QCoreApplication.translate( "GdalTools", "Create raster from the scattered data") )
QObject.connect( self.grid, SIGNAL( "triggered()" ), self.doGrid )
self.analysisMenu.addAction( self.grid )
if self.GdalVersion >= "1.7":
self.dem = QAction( QIcon( ":icons/dem.png" ), QCoreApplication.translate( "GdalTools", "DEM (Terrain models)" ), self.iface.mainWindow() )
self.dem.setStatusTip( QCoreApplication.translate( "GdalTools", "Tool to analyze and visualize DEMs" ) )
QObject.connect( self.dem, SIGNAL( "triggered()" ), self.doDEM )
self.analysisMenu.addAction( self.dem )
#self.analysisMenu.addActions( [ ] )
# miscellaneous menu (Build overviews (Pyramids), Tile index, Information, Merge, Build Virtual Raster (Catalog))
self.miscellaneousMenu = QMenu( QCoreApplication.translate( "GdalTools", "Miscellaneous" ) )
if self.GdalVersion >= "1.6":
self.buildVRT = QAction( QIcon(":/icons/vrt.png"), QCoreApplication.translate( "GdalTools", "Build Virtual Raster (Catalog)" ), self.iface.mainWindow() )
self.buildVRT.setStatusTip( QCoreApplication.translate( "GdalTools", "Builds a VRT from a list of datasets") )
QObject.connect( self.buildVRT, SIGNAL( "triggered()" ), self.doBuildVRT )
self.miscellaneousMenu.addAction( self.buildVRT )
self.merge = QAction( QIcon(":/icons/merge.png"), QCoreApplication.translate( "GdalTools", "Merge" ), self.iface.mainWindow() )
self.merge.setStatusTip( QCoreApplication.translate( "GdalTools", "Build a quick mosaic from a set of images") )
QObject.connect( self.merge, SIGNAL( "triggered()" ), self.doMerge )
self.info = QAction( QIcon( ":/icons/raster-info.png" ), QCoreApplication.translate( "GdalTools", "Information" ), self.iface.mainWindow() )
self.info.setStatusTip( QCoreApplication.translate( "GdalTools", "Lists information about raster dataset" ) )
QObject.connect( self.info, SIGNAL("triggered()"), self.doInfo )
self.overview = QAction( QIcon( ":icons/raster-overview.png" ), QCoreApplication.translate( "GdalTools", "Build overviews (Pyramids)" ), self.iface.mainWindow() )
self.overview.setStatusTip( QCoreApplication.translate( "GdalTools", "Builds or rebuilds overview images" ) )
QObject.connect( self.overview, SIGNAL( "triggered()" ), self.doOverview )
self.tileindex = QAction( QIcon( ":icons/tileindex.png" ), QCoreApplication.translate( "GdalTools", "Tile index" ), self.iface.mainWindow() )
self.tileindex.setStatusTip( QCoreApplication.translate( "GdalTools", "Build a shapefile as a raster tileindex" ) )
QObject.connect( self.tileindex, SIGNAL( "triggered()" ), self.doTileIndex )
self.miscellaneousMenu.addActions( [ self.merge, self.info, self.overview, self.tileindex ] )
self.menu.addMenu( self.projectionsMenu )
self.menu.addMenu( self.conversionMenu )
self.menu.addMenu( self.extractionMenu )
if not self.analysisMenu.isEmpty():
self.menu.addMenu( self.analysisMenu )
self.menu.addMenu( self.miscellaneousMenu )
self.settings = QAction( QCoreApplication.translate( "GdalTools", "GdalTools settings" ), self.iface.mainWindow() )
self.settings.setStatusTip( QCoreApplication.translate( "GdalTools", "Various settings for Gdal Tools" ) )
QObject.connect( self.settings, SIGNAL( "triggered()" ), self.doSettings )
self.menu.addAction( self.settings )
self.about = QAction( QIcon( ":icons/about.png" ), QCoreApplication.translate( "GdalTools", "About GdalTools" ), self.iface.mainWindow() )
self.about.setStatusTip( QCoreApplication.translate( "GdalTools", "Displays information about Gdal Tools" ) )
QObject.connect( self.about, SIGNAL( "triggered()" ), self.doAbout )
self.menu.addSeparator()
self.menu.addAction( self.about )
menu_bar = self.iface.mainWindow().menuBar()
actions = menu_bar.actions()
lastAction = actions[ len( actions ) - 1 ]
menu_bar.insertMenu( lastAction, self.menu )
def initGui(self):
if int(self.QgisVersion) < 1:
QMessageBox.warning(
self.iface.getMainWindow(), "Gdal Tools",
QCoreApplication.translate("GdalTools",
"Quantum GIS version detected: ") +
unicode(self.QgisVersion) + ".xx\n" +
QCoreApplication.translate(
"GdalTools",
"This version of Gdal Tools requires at least QGIS version 1.0.0\nPlugin will not be enabled."
))
return None
from tools.GdalTools_utils import Version, GdalConfig, LayerRegistry
self.GdalVersion = Version(GdalConfig.version())
LayerRegistry.setIface(self.iface)
# find the Raster menu
rasterMenu = None
menu_bar = self.iface.mainWindow().menuBar()
actions = menu_bar.actions()
rasterText = QCoreApplication.translate("QgisApp", "&Raster")
for a in actions:
if a.menu() != None and a.menu().title() == rasterText:
rasterMenu = a.menu()
break
if rasterMenu == None:
# no Raster menu, create and insert it before the Help menu
self.menu = QMenu()
self.menu.setTitle(rasterText)
lastAction = actions[len(actions) - 1]
menu_bar.insertMenu(lastAction, self.menu)
else:
self.menu = rasterMenu
self.menu.addSeparator()
if self.GdalVersion >= "1.6":
self.buildVRT = QAction(
QIcon(":/icons/vrt.png"),
QCoreApplication.translate("GdalTools",
"Build Virtual Raster (Catalog)"),
self.iface.mainWindow())
self.buildVRT.setStatusTip(
QCoreApplication.translate(
"GdalTools", "Builds a VRT from a list of datasets"))
QObject.connect(self.buildVRT, SIGNAL("triggered()"),
self.doBuildVRT)
self.menu.addAction(self.buildVRT)
if self.GdalVersion >= "1.6":
self.contour = QAction(
QIcon(":/icons/contour.png"),
QCoreApplication.translate("GdalTools", "Contour"),
self.iface.mainWindow())
self.contour.setStatusTip(
QCoreApplication.translate(
"GdalTools", "Builds vector contour lines from a DEM"))
QObject.connect(self.contour, SIGNAL("triggered()"),
self.doContour)
self.menu.addAction(self.contour)
if self.GdalVersion >= "1.3":
self.rasterize = QAction(
QIcon(":/icons/rasterize.png"),
QCoreApplication.translate("GdalTools",
"Rasterize (Vector to raster)"),
self.iface.mainWindow())
self.rasterize.setStatusTip(
QCoreApplication.translate(
"GdalTools", "Burns vector geometries into a raster"))
QObject.connect(self.rasterize, SIGNAL("triggered()"),
self.doRasterize)
self.menu.addAction(self.rasterize)
if self.GdalVersion >= "1.6":
self.polygonize = QAction(
QIcon(":/icons/polygonize.png"),
QCoreApplication.translate("GdalTools",
"Polygonize (Raster to vector)"),
self.iface.mainWindow())
self.polygonize.setStatusTip(
QCoreApplication.translate(
"GdalTools",
"Produces a polygon feature layer from a raster"))
QObject.connect(self.polygonize, SIGNAL("triggered()"),
self.doPolygonize)
self.menu.addAction(self.polygonize)
self.merge = QAction(QIcon(":/icons/merge.png"),
QCoreApplication.translate("GdalTools", "Merge"),
self.iface.mainWindow())
self.merge.setStatusTip(
QCoreApplication.translate(
"GdalTools", "Build a quick mosaic from a set of images"))
QObject.connect(self.merge, SIGNAL("triggered()"), self.doMerge)
self.menu.addAction(self.merge)
if self.GdalVersion >= "1.6":
self.sieve = QAction(
QIcon(":/icons/sieve.png"),
QCoreApplication.translate("GdalTools", "Sieve"),
self.iface.mainWindow())
self.sieve.setStatusTip(
QCoreApplication.translate("GdalTools",
"Removes small raster polygons"))
QObject.connect(self.sieve, SIGNAL("triggered()"), self.doSieve)
self.menu.addAction(self.sieve)
if self.GdalVersion >= "1.6":
self.proximity = QAction(
QIcon(":/icons/proximity.png"),
QCoreApplication.translate("GdalTools",
"Proximity (Raster distance)"),
self.iface.mainWindow())
self.proximity.setStatusTip(
QCoreApplication.translate("GdalTools",
"Produces a raster proximity map"))
QObject.connect(self.proximity, SIGNAL("triggered()"),
self.doProximity)
self.menu.addAction(self.proximity)
if self.GdalVersion >= "1.5":
self.nearBlack = QAction(
QIcon(":/icons/nearblack.png"),
QCoreApplication.translate("GdalTools", "Near black"),
self.iface.mainWindow())
self.nearBlack.setStatusTip(
QCoreApplication.translate(
"GdalTools",
"Convert nearly black/white borders to exact value"))
QObject.connect(self.nearBlack, SIGNAL("triggered()"),
self.doNearBlack)
self.menu.addAction(self.nearBlack)
self.warp = QAction(
QIcon(":/icons/warp.png"),
QCoreApplication.translate("GdalTools", "Warp (Reproject)"),
self.iface.mainWindow())
self.warp.setStatusTip(
QCoreApplication.translate(
"GdalTools", "Warp an image into a new coordinate system"))
QObject.connect(self.warp, SIGNAL("triggered()"), self.doWarp)
self.menu.addAction(self.warp)
if self.GdalVersion >= "1.5":
self.grid = QAction(
QIcon(":/icons/grid.png"),
QCoreApplication.translate("GdalTools",
"Grid (Interpolation)"),
self.iface.mainWindow())
self.grid.setStatusTip(
QCoreApplication.translate(
"GdalTools", "Create raster from the scattered data"))
QObject.connect(self.grid, SIGNAL("triggered()"), self.doGrid)
self.menu.addAction(self.grid)
self.translate = QAction(
QIcon(":/icons/translate.png"),
QCoreApplication.translate("GdalTools",
"Translate (Convert format)"),
self.iface.mainWindow())
self.translate.setStatusTip(
QCoreApplication.translate(
"GdalTools", "Converts raster data between different formats"))
QObject.connect(self.translate, SIGNAL("triggered()"),
self.doTranslate)
self.menu.addAction(self.translate)
self.info = QAction(
QIcon(":/icons/raster-info.png"),
QCoreApplication.translate("GdalTools", "Information"),
self.iface.mainWindow())
self.info.setStatusTip(
QCoreApplication.translate(
"GdalTools", "Lists information about raster dataset"))
QObject.connect(self.info, SIGNAL("triggered()"), self.doInfo)
self.menu.addAction(self.info)
self.projection = QAction(
QIcon(":icons/projection-add.png"),
QCoreApplication.translate("GdalTools", "Assign projection"),
self.iface.mainWindow())
self.projection.setStatusTip(
QCoreApplication.translate("GdalTools",
"Add projection info to the raster"))
QObject.connect(self.projection, SIGNAL("triggered()"),
self.doProjection)
self.menu.addAction(self.projection)
self.overview = QAction(
QIcon(":icons/raster-overview.png"),
QCoreApplication.translate("GdalTools",
"Build overviews (Pyramids)"),
self.iface.mainWindow())
self.overview.setStatusTip(
QCoreApplication.translate("GdalTools",
"Builds or rebuilds overview images"))
QObject.connect(self.overview, SIGNAL("triggered()"), self.doOverview)
self.menu.addAction(self.overview)
self.clipper = QAction(
QIcon(":icons/raster-clip.png"),
QCoreApplication.translate("GdalTools", "Clipper"),
self.iface.mainWindow())
#self.clipper.setStatusTip( QCoreApplication.translate( "GdalTools", "Converts raster data between different formats") )
QObject.connect(self.clipper, SIGNAL("triggered()"), self.doClipper)
self.menu.addAction(self.clipper)
self.paletted = QAction(
QIcon(":icons/raster-paletted.png"),
QCoreApplication.translate("GdalTools", "RGB to PCT"),
self.iface.mainWindow())
self.paletted.setStatusTip(
QCoreApplication.translate(
"GdalTools", "Convert a 24bit RGB image to 8bit paletted"))
QObject.connect(self.paletted, SIGNAL("triggered()"), self.doPaletted)
self.menu.addAction(self.paletted)
self.rgb = QAction(
QIcon(":icons/raster-paletted.png"),
QCoreApplication.translate("GdalTools", "PCT to RGB"),
self.iface.mainWindow())
self.rgb.setStatusTip(
QCoreApplication.translate(
"GdalTools", "Convert an 8bit paletted image to 24bit RGB"))
QObject.connect(self.rgb, SIGNAL("triggered()"), self.doRGB)
self.menu.addAction(self.rgb)
self.tileindex = QAction(
QIcon(":icons/tileindex.png"),
QCoreApplication.translate("GdalTools", "Tile index"),
self.iface.mainWindow())
self.tileindex.setStatusTip(
QCoreApplication.translate(
"GdalTools", "Build a shapefile as a raster tileindex"))
QObject.connect(self.tileindex, SIGNAL("triggered()"),
self.doTileIndex)
self.menu.addAction(self.tileindex)
if self.GdalVersion >= "1.7":
self.dem = QAction(
QIcon(":icons/dem.png"),
QCoreApplication.translate("GdalTools",
"DEM (Terrain models)"),
self.iface.mainWindow())
self.dem.setStatusTip(
QCoreApplication.translate(
"GdalTools", "Tool to analyze and visualize DEMs"))
QObject.connect(self.dem, SIGNAL("triggered()"), self.doDEM)
self.menu.addAction(self.dem)
self.settings = QAction(
QCoreApplication.translate("GdalTools", "GdalTools settings"),
self.iface.mainWindow())
self.settings.setStatusTip(
QCoreApplication.translate("GdalTools",
"Various settings for Gdal Tools"))
QObject.connect(self.settings, SIGNAL("triggered()"), self.doSettings)
self.menu.addAction(self.settings)
self.about = QAction(
QIcon(":icons/about.png"),
QCoreApplication.translate("GdalTools", "About GdalTools"),
self.iface.mainWindow())
self.about.setStatusTip(
QCoreApplication.translate(
"GdalTools", "Displays information about Gdal Tools"))
QObject.connect(self.about, SIGNAL("triggered()"), self.doAbout)
self.menu.addSeparator()
self.menu.addAction(self.about)
menu_bar = self.iface.mainWindow().menuBar()
actions = menu_bar.actions()
lastAction = actions[len(actions) - 1]
menu_bar.insertMenu(lastAction, self.menu)
