def test_modify_slider_log_range_slider(self):
model = RangeModel()
view = View(
Item(
"float_value",
editor=RangeEditor(low=.1, high=1000000000, mode='logslider')
)
)
tester = UITester()
with tester.create_ui(model, dict(view=view)) as ui:
number_field = tester.find_by_name(ui, "float_value")
slider = number_field.locate(Slider())
text = number_field.locate(Textbox())
# 10 steps is equivalent to 1 page step
# on this scale either of those is equivalent to increasing the
# trait's value from 10^n to 10^(n+1)
for _ in range(10):
slider.perform(KeyClick("Right"))
displayed = text.inspect(DisplayedText())
self.assertEqual(model.float_value, 1.0)
self.assertEqual(displayed, str(model.float_value))
slider.perform(KeyClick("Page Up"))
displayed = text.inspect(DisplayedText())
self.assertEqual(model.float_value, 10.0)
self.assertEqual(displayed, str(model.float_value))
def check_modify_slider(self, mode):
model = RangeModel(value=0)
view = View(
Item(
"value",
editor=RangeEditor(low=0, high=10, mode=mode)
)
)
tester = UITester()
with tester.create_ui(model, dict(view=view)) as ui:
number_field = tester.find_by_name(ui, "value")
slider = number_field.locate(Slider())
text = number_field.locate(Textbox())
# slider values are converted to a [0, 10000] scale. A single
# step is a change of 100 on that scale and a page step is 1000.
# Our range in [0, 10] so these correspond to changes of .1 and 1.
# Note: when tested manually, the step size seen on OSX and Wx is
# different.
for _ in range(10):
slider.perform(KeyClick("Right"))
displayed = text.inspect(DisplayedText())
self.assertEqual(model.value, 1)
self.assertEqual(displayed, str(model.value))
slider.perform(KeyClick("Page Up"))
displayed = text.inspect(DisplayedText())
self.assertEqual(model.value, 2)
self.assertEqual(displayed, str(model.value))
def test_useful_err_message(self):
obj = ListTraitTest(people=get_people(), style="simple")
tester = UITester()
with tester.create_ui(obj) as ui:
with self.assertRaises(LocationNotSupported) as exc:
people_list = tester.find_by_name(ui, "people")
people_list.locate(Textbox())
self.assertIn(Index, exc.exception.supported)
def check_slider_set_with_text_valid(self, mode):
model = RangeModel()
view = View(
Item("value", editor=RangeEditor(low=1, high=12, mode=mode)))
tester = UITester()
with tester.create_ui(model, dict(view=view)) as ui:
# sanity check
self.assertEqual(model.value, 1)
number_field = tester.find_by_name(ui, "value")
text = number_field.locate(Textbox())
text.perform(KeyClick("0"))
text.perform(KeyClick("Enter"))
displayed = text.inspect(DisplayedText())
self.assertEqual(model.value, 10)
self.assertEqual(displayed, str(model.value))
def test_modify_out_of_range(self):
obj = RangeExcludeLow()
tester = UITester(auto_process_events=False)
with tester.create_ui(obj) as ui:
number_field = tester.find_by_name(ui, "x")
text = number_field.locate(Textbox())
# should not fail
def set_out_of_range():
text.perform(KeyClick("Backspace"))
text.perform(KeyClick("0"))
text.perform(KeyClick("Enter"))
mdtester = ModalDialogTester(set_out_of_range)
mdtester.open_and_run(lambda x: x.close(accept=True))
def test_editor_factory_format(self):
"""
format trait on RangeEditor editor factory has been deprecated in
favor of format_str. However, behavior should be unchanged.
"""
model = RangeModel()
with self.assertWarns(DeprecationWarning):
view = View(
Item("float_value", editor=RangeEditor(format="%s ...")))
tester = UITester()
with tester.create_ui(model, dict(view=view)) as ui:
float_value_field = tester.find_by_name(ui, "float_value")
float_value_text = float_value_field.locate(Textbox())
self.assertEqual(float_value_text.inspect(DisplayedText()),
"0.1 ...")
def check_slider_set_with_text_after_empty(self, mode):
model = RangeModel()
view = View(
Item("value", editor=RangeEditor(low=1, high=12, mode=mode)))
tester = UITester()
with tester.create_ui(model, dict(view=view)) as ui:
number_field = tester.find_by_name(ui, "value")
text = number_field.locate(Textbox())
# Delete all contents of textbox
for _ in range(5):
text.perform(KeyClick("Backspace"))
text.perform(KeySequence("11"))
text.perform(KeyClick("Enter"))
displayed = text.inspect(DisplayedText())
self.assertEqual(model.value, 11)
self.assertEqual(displayed, str(model.value))
def test_editor_format(self):
"""
The format trait on an Editor instance previously potentially
could override the factory. Now that is not the case.
"""
model = RangeModel()
with self.assertWarns(DeprecationWarning):
view = View(
Item("float_value", editor=RangeEditor(format="%s ...")))
tester = UITester()
with tester.create_ui(model, dict(view=view)) as ui:
float_value_field = tester.find_by_name(ui, "float_value")
float_value_field._target.format = "%s +++"
model.float_value = 0.2
float_value_text = float_value_field.locate(Textbox())
self.assertEqual(float_value_text.inspect(DisplayedText()),
"0.2 ...")
def test_editor_error_msg(self):
from pyface.qt import QtCore, QtGui
class Foo(HasTraits):
x = Range(low=0.0, high=1.0, value=0.5, exclude_low=True)
foo = Foo()
tester = UITester(auto_process_events=False)
with tester.create_ui(foo) as ui:
x_range = tester.find_by_name(ui, "x")
x_range_textbox = x_range.locate(Textbox())
x_range_textbox.perform(KeyClick('Backspace'))
x_range_textbox.perform(KeySequence('0'))
def trigger_error():
x_range_textbox.perform(KeyClick('Enter'))
def check_and_close(mdtester):
try:
with mdtester.capture_error():
self.assertTrue(
mdtester.has_widget(
text="The 'x' trait of a Foo instance must be "
"0.0 < a floating point number <= 1.0, "
"but a value of 0.0 <class 'float'> was "
"specified.",
type_=QtGui.QMessageBox,
)
)
self.assertEqual(
mdtester.get_dialog_widget().textFormat(),
QtCore.Qt.TextFormat.PlainText,
)
finally:
mdtester.close(accept=True)
self.assertTrue(mdtester.dialog_was_opened)
mdtester = ModalDialogTester(trigger_error)
mdtester.open_and_run(check_and_close)
self.assertTrue(mdtester.dialog_was_opened)
def test_format_func(self):
def num_to_time(num):
minutes = int(num / 60)
if minutes < 10:
minutes_str = '0' + str(minutes)
else:
minutes_str = str(minutes)
seconds = num % 60
if seconds < 10:
seconds_str = '0' + str(seconds)
else:
seconds_str = str(seconds)
return minutes_str + ':' + seconds_str
model = RangeModel()
view = View(
Item("float_value", editor=RangeEditor(format_func=num_to_time)))
tester = UITester()
with tester.create_ui(model, dict(view=view)) as ui:
float_value_field = tester.find_by_name(ui, "float_value")
float_value_text = float_value_field.locate(Textbox())
self.assertEqual(float_value_text.inspect(DisplayedText()),
"00:00.1")
def test_run_demo(self):
demo = runpy.run_path(DEMO_PATH)["demo"]
tester = UITester()
with tester.create_ui(demo) as ui:
simple_small = tester.find_by_id(ui, 'simple_small')
custom_small = tester.find_by_id(ui, 'custom_small')
text_small = tester.find_by_id(ui, 'text_small')
readonly_small = tester.find_by_id(ui, 'readonly_small')
simple_medium = tester.find_by_id(ui, 'simple_medium')
custom_medium = tester.find_by_id(ui, 'custom_medium')
text_medium = tester.find_by_id(ui, 'text_medium')
readonly_medium = tester.find_by_id(ui, 'readonly_medium')
# Testing for SimpleSpinEditor is not supported yet so the simple
# and custom styles for the large_range_int are not included here
text_large = tester.find_by_id(ui, 'text_large')
readonly_large = tester.find_by_id(ui, 'readonly_large')
simple_float = tester.find_by_id(ui, 'simple_float')
custom_float = tester.find_by_id(ui, 'custom_float')
text_float = tester.find_by_id(ui, 'text_float')
readonly_float = tester.find_by_id(ui, 'readonly_float')
# Tests for the small_int_range ##################################
simple_small_slider = simple_small.locate(Slider())
simple_small_slider.perform(KeyClick("Page Up"))
self.assertEqual(demo.small_int_range, 2)
simple_small_text = simple_small.locate(Textbox())
simple_small_text.perform(KeyClick("Backspace"))
simple_small_text.perform(KeyClick("3"))
simple_small_text.perform(KeyClick("Enter"))
self.assertEqual(demo.small_int_range, 3)
custom_small.locate(Index(0)).perform(MouseClick())
self.assertEqual(demo.small_int_range, 1)
text_small.perform(KeyClick("0"))
text_small.perform(KeyClick("Enter"))
self.assertEqual(demo.small_int_range, 10)
demo.small_int_range = 7
displayed_small = readonly_small.inspect(DisplayedText())
self.assertEqual(displayed_small, '7')
# Tests for the medium_int_range #################################
simple_medium_slider = simple_medium.locate(Slider())
# on this range, page up/down corresponds to a change of 2.
simple_medium_slider.perform(KeyClick("Page Up"))
self.assertEqual(demo.medium_int_range, 3)
simple_medium_text = simple_medium.locate(Textbox())
simple_medium_text.perform(KeyClick("Backspace"))
simple_medium_text.perform(KeyClick("4"))
simple_medium_text.perform(KeyClick("Enter"))
self.assertEqual(demo.medium_int_range, 4)
custom_medium_slider = custom_medium.locate(Slider())
custom_medium_slider.perform(KeyClick("Page Down"))
self.assertEqual(demo.medium_int_range, 2)
custom_medium_text = custom_medium.locate(Textbox())
custom_medium_text.perform(KeyClick("Backspace"))
custom_medium_text.perform(KeyClick("1"))
custom_medium_text.perform(KeyClick("Enter"))
self.assertEqual(demo.medium_int_range, 1)
text_medium.perform(KeyClick("0"))
text_medium.perform(KeyClick("Enter"))
self.assertEqual(demo.medium_int_range, 10)
demo.medium_int_range = 7
displayed_medium = readonly_medium.inspect(DisplayedText())
self.assertEqual(displayed_medium, '7')
# Tests for the large_int_range ##################################
# Testing for SimpleSpinEditor is not supported yet
text_large.perform(KeySequence("00"))
text_large.perform(KeyClick("Enter"))
self.assertEqual(demo.large_int_range, 100)
demo.large_int_range = 77
displayed_large = readonly_large.inspect(DisplayedText())
self.assertEqual(displayed_large, '77')
# Tests for the float_range ######################################
simple_float_slider = simple_float.locate(Slider())
# on this range, page up/down corresponds to a change of 1.000.
simple_float_slider.perform(KeyClick("Page Up"))
self.assertEqual(demo.float_range, 1.000)
simple_float_text = simple_float.locate(Textbox())
for _ in range(3):
simple_float_text.perform(KeyClick("Backspace"))
simple_float_text.perform(KeyClick("5"))
simple_float_text.perform(KeyClick("Enter"))
self.assertEqual(demo.float_range, 1.5)
custom_float_slider = custom_float.locate(Slider())
# after the trait is set to 1.5 above, the active range shown by
# the LargeRangeSliderEditor for the custom style is [0,11.500]
# so a page down is now a decrement of 1.15
custom_float_slider.perform(KeyClick("Page Down"))
self.assertEqual(round(demo.float_range, 2), 0.35)
custom_float_text = custom_float.locate(Textbox())
for _ in range(5):
custom_float_text.perform(KeyClick("Backspace"))
custom_float_text.perform(KeySequence("50.0"))
custom_float_text.perform(KeyClick("Enter"))
self.assertEqual(demo.float_range, 50.0)
text_float.perform(KeyClick("5"))
text_float.perform(KeyClick("Enter"))
self.assertEqual(demo.float_range, 50.05)
demo.float_range = 72.0
displayed_float = readonly_float.inspect(DisplayedText())
self.assertEqual(displayed_float, '72.0')
