Ejemplo n.º 1
0
 def test_reload_credentials_nondefault(self):
     dev = Connection(
         hostname='',
         start=['mock_device_cli --os nxos --state n5k_exec'],
         os='nxos',
         series='n5k',
         credentials=dict(default=dict(
             username='******', password='******'),
             alt=dict(
             username='******', password='******')),
     )
     dev.connect()
     dev.reload(reload_command="reload2", reload_creds='alt')
     dev.disconnect()
Ejemplo n.º 2
0
 def test_reload(self):
     c = Connection(
         hostname='ASA',
         start=[
             'mock_device_cli --os asa --state asa_fp2k_console_disable'
         ],
         os='asa',
         platform='fp2k',
         credentials=dict(default=dict(username='******', password='******'),
                          enable=dict(password='******')),
     )
     c.connect()
     c.reload()
     c.disconnect()
Ejemplo n.º 3
0
 def test_reload_credentials_nondefault(self):
     dev = Connection(hostname='',
                      start=['mock_device_cli --os nxos --state n5k_exec'],
                      os='nxos',
                      platform='n5k',
                      credentials=dict(default=dict(username='******',
                                                    password='******'),
                                       alt=dict(username='******',
                                                password='******')),
                      mit=True)
     dev.connect()
     dev.settings.RELOAD_RECONNECT_WAIT = 1
     dev.reload(reload_command="reload2", reload_creds='alt')
     dev.disconnect()
Ejemplo n.º 4
0
    def test_stack_config(self):
        c = Connection(
            hostname='Router',
            start=['mock_device_cli --os iosxe --state stack_login'] * 5,
            os='iosxe',
            chassis_type='stack',
            username='******',
            tacacs_password='******',
            enable_password='******')
        c.connect()

        c.configure('no logging console', target='standby')
        c.configure('no logging console', target='peer_3')
        c.peer_1.configure('no logging console')
Ejemplo n.º 5
0
 def test_config_prompt(self):
     c = Connection(
         hostname='APC',
         start=['mock_device_cli --os apic --state apic_connect'],
         os='apic',
         credentials={
             'default': {
                 'username': '******',
                 'password': '******'
             }
         })
     c.connect()
     c.configure('tenant test')
     c.disconnect()
 def test_ha_connect_with_custom_auth_prompt(self):
     d = Connection(hostname='Router', start=['mock_device_cli --os ios --state custom_login,exec_standby'],
                      username='******', tacacs_password='******', os='ios', enable_password='******')
     d.settings.LOGIN_PROMPT = r'Identifier:'
     d.settings.PASSWORD_PROMPT = r'Passe:'
     d.connect()
     d.disconnect()
Ejemplo n.º 7
0
 def test_slow_config_mode(self):
     c = Connection(
         hostname='Switch',
         start=['mock_device_cli --os iosxe --state slow_config_mode'],
         os='iosxe',
         mit=True,
         init_exec_commands=[],
         init_config_commands=[],
         settings=dict(POST_DISCONNECT_WAIT_SEC=0,
                       GRACEFUL_DISCONNECT_WAIT_SEC=0.2),
         log_buffer=True)
     c.connect()
     c.configure(['no logging console'])
     c.disconnect()
Ejemplo n.º 8
0
    def test_juniper_to_cisco_config_clistyle(self):
        c = Connection(
            hostname='ncs',
            start=['mock_device_cli --os confd --state juniper_config'],
            os='confd',
            username='******',
            tacacs_password='******')
        c.connect()
        c.execute('configure')
        c.cli_style(style='c')
        self.assertEqual("\n".join(c.spawn.match.match_output.splitlines()),
                         """\
switch cli
user@ncs(config)# """)
Ejemplo n.º 9
0
 def test_rommon_enable_break(self):
     c = Connection(hostname='switch',
                    start=['mock_device_cli --os iosxe --state cat9k_enable_reload_to_rommon_break'],
                    os='iosxe',
                    platform='cat9k',
                    mit=True,
                    credentials=dict(default=dict(username='******', password='******'),
                                     alt=dict(username='******', password='******')),
                    settings=dict(POST_DISCONNECT_WAIT_SEC=0, GRACEFUL_DISCONNECT_WAIT_SEC=0.2),
                    log_buffer=True)
     c.connect()
     c.rommon()
     self.assertEqual(c.state_machine.current_state, 'rommon')
     c.disconnect()
Ejemplo n.º 10
0
 def test_enable_secret(self):
     c = Connection(
         hostname='R1',
         start=[
             'mock_device_cli --os iosxe --state initial_config_dialog --hostname R1'
         ],
         os='iosxe',
         init_exec_commands=[],
         init_config_commands=[],
         credentials=dict(default=dict(password='******')),
         log_buffer=True)
     c.connect()
     c.configure(['no logging console'])
     c.disconnect()
Ejemplo n.º 11
0
 def test_config_no_service_prompt_config(self):
     c = Connection(
         hostname='Switch',
         start=[
             'mock_device_cli --os iosxe --state enable_no_service_prompt_config'
         ],
         os='iosxe',
         mit=True,
         init_exec_commands=[],
         init_config_commands=[],
         log_buffer=True)
     c.connect()
     c.configure(['no logging console'])
     c.disconnect()
Ejemplo n.º 12
0
 def setUpClass(cls):
     cls.c1 = Connection(hostname='Router1',
                         start=['mock_device_cli --os ios --state enable'],
                         os='ios',
                         username='******',
                         tacacs_password='******',
                         enable_password='******')
     cls.c2 = Connection(hostname='Router2',
                         start=['mock_device_cli --os ios --state enable'],
                         os='ios',
                         username='******',
                         tacacs_password='******',
                         enable_password='******')
     cls.c3 = Connection(hostname='Router3',
                         start=['mock_device_cli --os ios --state enable'],
                         os='ios',
                         username='******',
                         tacacs_password='******',
                         enable_password='******')
     cls.c1.connect()
     cls.c2.connect()
     cls.c3.connect()
Ejemplo n.º 13
0
 def setUpClass(cls):
     cls.c = Connection(hostname='Router',
                        start=['mock_device_cli --os ios --state exec'],
                        os='ios',
                        username='******',
                        tacacs_password='******',
                        enable_password='******',
                        init_exec_commands=[],
                        init_config_commands=[])
     cls.c.connect()
     with open(os.path.join(mockdata_path, 'ios/ios_mock_data.yaml'),
               'rb') as datafile:
         cls.command_data = yaml.safe_load(datafile.read())
Ejemplo n.º 14
0
 def test_connect_shell(self):
     c = Connection(
         hostname='APC',
         start=['mock_device_cli --os apic --state apic_shell_connect'],
         os='apic',
         credentials=dict(default=dict(username='******', password='******')))
     c.connect()
     self.assertEqual(c.state_machine.current_state, 'shell')
     out = c.execute('pwd')
     self.assertEqual(out, '/root')
     c.disconnect()
Ejemplo n.º 15
0
 def test_multi_thread_connect(self):
     dev_dic = {
         'os': 'ios',
         'hostname': 'Router',
         'start': ['mock_device_cli --os ios --state login'],
         'username': '******',
         'tacacs_password': '******',
         'enable_password': '******'
     }
     with ThreadPoolExecutor(max_workers=3) as executor:
         all_task = [executor.submit(Connection(**dev_dic).connect)
                     for _ in range(3)]
         results = [task.result() for task in all_task]
Ejemplo n.º 16
0
 def setUpClass(cls):
     cls.c = Connection(
         hostname='iosxrv-1',
         start=['mock_device_cli --os iosxr --state iosxrv9k_connect'],
         os='iosxr',
         platform='iosxrv9k',
         username='******',
         enable_password='******',
         learn_hostname=True,
         init_exec_commands=[],
         init_config_commands=[],
         connection_timeout=1,
     )
Ejemplo n.º 17
0
    def setUpClass(cls):
        cls.c = Connection(
            hostname='switch',
            start=['mock_device_cli --os iosxe --state cat3k_exec'],
            os='iosxe',
            platform='cat3k',
            credentials=dict(default=dict(username='******', password='******'),
                             alt=dict(username='******', password='******')),
            settings=dict(POST_DISCONNECT_WAIT_SEC=0,
                          GRACEFUL_DISCONNECT_WAIT_SEC=0.2),
            log_buffer=True)

        cls.c.connect()
    def test_ping_options(self):
        c = Connection(hostname='Router',
                            start=['mock_device_cli --os ios --state exec'],
                            os='ios',
                            username='******',
                            tacacs_password='******',
                            enable_password='******')
        r = c.ping('3.3.3.3', size=1500, count=5, ping_packet_timeout=2)
        self.assertEqual(r, "\r\n".join("""ping
Protocol [ip]: 
Target IP address: 3.3.3.3
Repeat count [5]: 5
Datagram size [100]: 1500
Timeout in seconds [2]: 2
Extended commands [n]: n
Sweep range of sizes [n]: n
Type escape sequence to abort.
Sending 5, 1500-byte ICMP Echos to 3.3.3.3, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/1 ms

""".splitlines()))
Ejemplo n.º 19
0
    def test_ping_success_vrf(self):
        c = Connection(hostname='Router',
                       start=['mock_device_cli --os iosxr --state enable'],
                       os='iosxr',
                       username='******',
                       tacacs_password='******',
                       enable_password='******')
        r = c.ping('10.0.0.2', vrf='management')
        self.assertEqual(r.strip(), "\r\n".join("""ping vrf management
Protocol [ip]: 
Target IP address: 10.0.0.2
Repeat count [5]: 
Datagram size [100]: 
Timeout in seconds [2]: 
Extended commands? [no]: n
Sweep range of sizes? [no]: n
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.0.0.2, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/3 ms
RP/0/RP0/CPU0:""".\
splitlines()))
Ejemplo n.º 20
0
    def test_log_message_before_prompt(self):
        c = Connection(hostname='R1',
                            start=['mock_device_cli --hostname R1 --os iosxr --state enable'],
                            os='iosxr',
                            username='******',
                            enable_password='******',
                            init_config_commands=[],
                            init_exec_commands=[]
                            )
        c.connect()

        c.settings.IGNORE_CHATTY_TERM_OUTPUT = False
        c.sendline('process_restart_msg')
        r = c.execute('show telemetry | inc ACTIVE')
        self.assertIn("""process_restart_msg
0/RP0/ADMIN0:Jul 7 10:07:42.979 UTC: pm[2890]: %INFRA-Process_Manager-3-PROCESS_RESTART : Process tams (IID: 0) restarted""",
                      r.replace('\r', ''))

        c.settings.IGNORE_CHATTY_TERM_OUTPUT = True
        c.sendline('process_restart_msg')
        r = c.execute('show telemetry | inc ACTIVE')
        self.assertEqual(r, 'Sat Jul 7 10:08:02.976 UTC\r\nState: ACTIVE')
Ejemplo n.º 21
0
    def test_mpls_ping_success(self):
        c = Connection(hostname='mlx8',
                       start=['mock_device_cli --os ironware --state exec'],
                       os='ironware',
                       credentials={
                           'default': {
                               'username': '******',
                               'password': '******'
                           },
                           'enable': {
                               'password': '******'
                           }
                       })
        c.mpls_ping(lsp='mlx8.1_to_ces.2')
        self.assertEqual(
            "\n".join(c.spawn.match.match_output.splitlines()),
            """ping mpls rsvp lsp mlx8.1_to_ces.2
Send 5 96-byte MPLS Echo Requests over RSVP LSP mlx8.1_to_ces.2, timeout 5000 msec
Type Control-c to abort
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max=0/1/3 ms
SSH@mlx8#""")
Ejemplo n.º 22
0
 def setUpClass(cls):
     cls.ha = MockDeviceTcpWrapperIOS(port=0, state='login,exec_standby')
     md = unicon.mock.mock_device.MockDevice(device_os='ios', state='exec')
     cls.expected_output = md.mock_data['reload_confirm_prompt']['commands']['']['response']
     cls.ha.start()
     cls.ha_device = Connection(
         hostname='Router',
         start=['telnet 127.0.0.1 ' + str(cls.ha.ports[0]),
                'telnet 127.0.0.1 ' + str(cls.ha.ports[1])],
         os='ios', username='******', tacacs_password='******',
         enable_password='******'
     )
     cls.ha_device.connect()
Ejemplo n.º 23
0
 def test_admin_configure3(self):
     conn = Connection(hostname='Router',
                       start=['mock_device_cli --os iosxr --state enable2'],
                       os='iosxr',
                       enable_password='******')
     conn.connect()
     out = conn.admin_configure('username root\nsecret 123\ngroup cisco-support\nexit')
     self.assertEqual('username root\r\nRP/0/0/CPU0:secret 123\r\nRP/0/0/CPU0:group cisco-support\r\n'
         'RP/0/0/CPU0:exit\r\nRP/0/0/CPU0:commit\r\nRP/0/0/CPU0:', out)
     self.assertEqual(conn.state_machine.current_state, 'enable')
     conn.disconnect()
Ejemplo n.º 24
0
    def test_ping_success_no_vrf(self):
        c = Connection(hostname='Router',
                       start=['mock_device_cli --os iosxe --state isr_exec'],
                       os='iosxe',
                       username='******',
                       tacacs_password='******',
                       enable_password='******')
        r = c.ping('192.0.0.5', count=30)
        self.maxDiff = None
        self.assertEqual(r.strip(), "\r\n".join("""ping
Protocol [ip]: 
Target IP address: 192.0.0.5
Repeat count [5]: 30
Datagram size [100]: 
Timeout in seconds [2]: 
Extended commands [n]: n
Sweep range of sizes [n]: n
Type escape sequence to abort.
Sending 30, 100-byte ICMP Echos to 192.0.0.5, timeout is 2 seconds:
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Success rate is 100 percent (30/30), round-trip min/avg/max = 1/1/3 ms""".\
splitlines()))
 def setUpClass(cls):
     cls.c = Connection(
         hostname='Router',
         start=['mock_device_cli --os iosxr --state connect_ssh'],
         os='iosxr',
         platform='asr9k',
         username='******',
         enable_password='******',
         line_password='******',
         init_exec_commands=[],
         init_config_commands=[],
     )
     cls.c.connect()
Ejemplo n.º 26
0
 def setUpClass(cls):
     cls.d = Connection(hostname='Router',
                        start=['mock_device_cli --os ios --state exec'],
                        os='ios',
                        enable_password='******',
                        username='******',
                        tacacs_password='******')
     cls.d.connect()
     cls.md = MockDevice(device_os='ios', state='exec')
     cls.ha = MockDeviceTcpWrapperIOS(port=0, state='login,exec_standby')
     cls.ha.start()
     cls.ha_device = Connection(
         hostname='Router',
         start=[
             'telnet 127.0.0.1 ' + str(cls.ha.ports[0]),
             'telnet 127.0.0.1 ' + str(cls.ha.ports[1])
         ],
         os='ios',
         username='******',
         tacacs_password='******',
         enable_password='******')
     cls.ha_device.connect()
Ejemplo n.º 27
0
    def test_connect_different_prompt_format(self):
        c = Connection(hostname='KLMER02-SU1',
            start=['mock_device_cli --os iosxr --state enable4'],
            os='iosxr')

        c.connect()
        self.assertEqual(c.spawn.match.match_output,'end\r\nRP/B0/CB0/CPU0:KLMER02-SU1#')
        c.disconnect()
Ejemplo n.º 28
0
 def test_console_execute(self):
     c = Connection(
         hostname='Firepower',
         start=['mock_device_cli --os fxos --state chassis_exec'],
         os='fxos',
         series='ftd',
         username='******',
         tacacs_password='******',
         enable_password='******',
         line_password='******')
     c.connect()
     c.switchto('ftd expert')
     c.execute(['sudo su -'],
               reply=Dialog([password_stmt, escape_char_stmt]),
               allow_state_change=True)
Ejemplo n.º 29
0
 def test_reload_credentails(self):
     c = Connection(
         hostname='APC',
         start=['mock_device_cli --os apic --state apic_connect'],
         os='apic',
         credentials={
             'default': {
                 'username': '******',
                 'password': '******'
             }
         })
     c.connect()
     c.settings.POST_RELOAD_WAIT = 1
     c.reload()
     c.disconnect()
Ejemplo n.º 30
0
 def test_asav_reload(self):
     c = Connection(hostname='ASA',
                         start=['mock_device_cli --os asa --state asa_reload'],
                         os='asa',
                         platform='asav',
                         credentials=dict(default=dict(username='******', password='******')))
     c.connect()
     c.reload()