def main():
# Instantiate a BMP250E instance using default i2c bus and address
sensor = sensorObj.BMA250E()
# For SPI, bus 0, you would pass -1 as the address, and a valid pin for CS:
# BMA250E(0, -1, 10);
## Exit handlers ##
# This function stops python from printing a stacktrace when you hit control-C
def SIGINTHandler(signum, frame):
raise SystemExit
# This function lets you run code on exit
def exitHandler():
print("Exiting")
sys.exit(0)
# Register exit handlers
atexit.register(exitHandler)
signal.signal(signal.SIGINT, SIGINTHandler)
x = sensorObj.new_floatp()
y = sensorObj.new_floatp()
z = sensorObj.new_floatp()
# now output data every 250 milliseconds
while (1):
sensor.update()
sensor.getAccelerometer(x, y, z)
print("Accelerometer x:", sensorObj.floatp_value(x), end=' ')
print(" y:", sensorObj.floatp_value(y), end=' ')
print(" z:", sensorObj.floatp_value(z), end=' ')
print(" g")
# we show both C and F for temperature
print("Compensation Temperature:",
sensor.getTemperature(),
"C /",
end=' ')
print(sensor.getTemperature(True), "F")
print()
time.sleep(.250)
def main():
# Instantiate a BMX055 instance using default i2c bus and address
sensor = sensorObj.BMX055()
## Exit handlers ##
# This function stops python from printing a stacktrace when you hit control-C
def SIGINTHandler(signum, frame):
raise SystemExit
# This function lets you run code on exit
def exitHandler():
print("Exiting")
sys.exit(0)
# Register exit handlers
atexit.register(exitHandler)
signal.signal(signal.SIGINT, SIGINTHandler)
x = sensorObj.new_floatp()
y = sensorObj.new_floatp()
z = sensorObj.new_floatp()
# now output data every 250 milliseconds
while (1):
sensor.update()
sensor.getAccelerometer(x, y, z)
print("Accelerometer x:", sensorObj.floatp_value(x), end=' ')
print(" y:", sensorObj.floatp_value(y), end=' ')
print(" z:", sensorObj.floatp_value(z), end=' ')
print(" g")
sensor.getGyroscope(x, y, z)
print("Gyroscope x:", sensorObj.floatp_value(x), end=' ')
print(" y:", sensorObj.floatp_value(y), end=' ')
print(" z:", sensorObj.floatp_value(z), end=' ')
print(" degrees/s")
sensor.getMagnetometer(x, y, z)
print("Magnetometer x:", sensorObj.floatp_value(x), end=' ')
print(" y:", sensorObj.floatp_value(y), end=' ')
print(" z:", sensorObj.floatp_value(z), end=' ')
print(" uT")
print()
time.sleep(.250)
def main():
# Instantiate a BMP250E instance using default i2c bus and address
sensor = sensorObj.BMG160()
# For SPI, bus 0, you would pass -1 as the address, and a valid pin for CS:
# BMG160(0, -1, 10);
## Exit handlers ##
# This function stops python from printing a stacktrace when you hit control-C
def SIGINTHandler(signum, frame):
raise SystemExit
# This function lets you run code on exit
def exitHandler():
print("Exiting")
sys.exit(0)
# Register exit handlers
atexit.register(exitHandler)
signal.signal(signal.SIGINT, SIGINTHandler)
x = sensorObj.new_floatp()
y = sensorObj.new_floatp()
z = sensorObj.new_floatp()
# now output data every 250 milliseconds
while (1):
sensor.update()
sensor.getGyroscope(x, y, z)
print("Gyroscope x:", sensorObj.floatp_value(x), end=' ')
print(" y:", sensorObj.floatp_value(y), end=' ')
print(" z:", sensorObj.floatp_value(z), end=' ')
print(" degrees/s")
# we show both C and F for temperature
print("Compensation Temperature:", sensor.getTemperature(), "C /", end=' ')
print(sensor.getTemperature(True), "F")
print()
time.sleep(.250)
def main():
# Instantiate a BMX055 instance using default i2c bus and address
sensor = sensorObj.BMX055()
## Exit handlers ##
# This function stops python from printing a stacktrace when you hit control-C
def SIGINTHandler(signum, frame):
raise SystemExit
# This function lets you run code on exit
def exitHandler():
print("Exiting")
sys.exit(0)
# Register exit handlers
atexit.register(exitHandler)
signal.signal(signal.SIGINT, SIGINTHandler)
x = sensorObj.new_floatp()
y = sensorObj.new_floatp()
z = sensorObj.new_floatp()
# now output data every 250 milliseconds
while (1):
sensor.update()
sensor.getAccelerometer(x, y, z)
print("Accelerometer x:", sensorObj.floatp_value(x), end=' ')
print(" y:", sensorObj.floatp_value(y), end=' ')
print(" z:", sensorObj.floatp_value(z), end=' ')
print(" g")
sensor.getGyroscope(x, y, z)
print("Gyroscope x:", sensorObj.floatp_value(x), end=' ')
print(" y:", sensorObj.floatp_value(y), end=' ')
print(" z:", sensorObj.floatp_value(z), end=' ')
print(" degrees/s")
sensor.getMagnetometer(x, y, z)
print("Magnetometer x:", sensorObj.floatp_value(x), end=' ')
print(" y:", sensorObj.floatp_value(y), end=' ')
print(" z:", sensorObj.floatp_value(z), end=' ')
print(" uT")
print()
time.sleep(.250)
def main():
# Instantiate a BMP250E instance using default i2c bus and address
sensor = sensorObj.BMM150()
# For SPI, bus 0, you would pass -1 as the address, and a valid pin for CS:
# BMM150(0, -1, 10);
## Exit handlers ##
# This function stops python from printing a stacktrace when you hit control-C
def SIGINTHandler(signum, frame):
raise SystemExit
# This function lets you run code on exit
def exitHandler():
print("Exiting")
sys.exit(0)
# Register exit handlers
atexit.register(exitHandler)
signal.signal(signal.SIGINT, SIGINTHandler)
x = sensorObj.new_floatp()
y = sensorObj.new_floatp()
z = sensorObj.new_floatp()
# now output data every 250 milliseconds
while (1):
sensor.update()
sensor.getMagnetometer(x, y, z)
print("Magnetometer x:", sensorObj.floatp_value(x), end=' ')
print(" y:", sensorObj.floatp_value(y), end=' ')
print(" z:", sensorObj.floatp_value(z), end=' ')
print(" uT")
print()
time.sleep(.250)
