def wifi(comm="on"):
global _wc
if _wc is None:
from util.wifi_connect import WiFiConnect
_wc = WiFiConnect()
if comm == "on":
if _wc.connect():
print("WiFi: OK")
else:
print("WiFi: Connect error, check configuration")
if comm == "scan":
staactive = _wc.sta_if.active()
if not staactive:
_wc.sta_if.active(True)
from ubinascii import hexlify
print("networks:")
print('-' * SEPARATOR_WIDTH)
nets = [[item[0].decode('utf-8'), hexlify(item[1], ":").decode(), item[2], item[3], item[4]] for item in _wc.sta_if.scan()]
for net in nets:
print(str(net))
print('-' * SEPARATOR_WIDTH)
_wc.sta_if.active(staactive)
if comm == "off":
try:
_wc.sta_if.disconnect()
_wc.sta_if.active(False)
except Exception as e:
print("Exception: {0}".format(e))
def w_connect():
led.value(1)
from util.wifi_connect import WiFiConnect
sleep(1)
w = WiFiConnect()
if w.connect():
print("WiFi: OK")
else:
print("WiFi: Connect error, check configuration")
led.value(0)
print('Network config:', w.sta_if.ifconfig())
return w
def w_connect():
global wifi
time.sleep_ms(1000)
wifi_config = read_wifi_config()
if Debug: print("config for: " + wifi_config["wifi_ssid"])
wifi = WiFiConnect(wifi_config["wifi_retries"] if "wifi_retries" in
wifi_config else wifi_retries)
wifi.events_add_connecting(connecting_callback)
wifi.events_add_connected(connected_callback)
wifi.events_add_timeout(connecting_timeout_callback)
wifi.events_add_disconnected(disconnected_callback)
wifi_status = wifi.connect(wifi_config["wifi_ssid"],
wifi_config["wifi_pass"])
if Debug: print("WiFi: OK" if wifi_status else "WiFi: Error")
def w_connect():
global _is_wifi_connect
# led.value(1)
from util.wifi_connect import WiFiConnect
sleep(1)
w = WiFiConnect()
if w.connect():
print("*")
_is_wifi_connect = True
else:
print("WiFi: Connect error, check configuration")
# led.value(0)
return w
def w_connect():
from network import WLAN, STA_IF
led.value(1)
from util.wifi_connect import WiFiConnect
sleep(1)
w = WiFiConnect()
if w.connect():
print("WiFi: OK")
else:
print("WiFi: Connect error, check configuration")
led.value(0)
wlan = WLAN(STA_IF)
print('network config:', wlan.ifconfig())
return wlan
y = int(data)
lcd.move_to(x, y)
except Exception as e:
print("Error parse message")
print(e)
print("wifi_config >")
wifi_config = read_wifi_config()
wifi = WiFiConnect(wifi_config["wifi_retries"] if "wifi_retries" in
wifi_config else 250)
wifi.events_add_connecting(connecting_callback)
wifi.events_add_connected(connected_callback)
wifi_status = wifi.connect(wifi_config["wifi_ssid"], wifi_config["wifi_pass"])
print("mqtt_config >")
mqtt_clientid_prefix = read_mqtt_config()["mqtt_clientid_prefix"]
mqtt_host = read_mqtt_config()["mqtt_broker_ip"]
mqtt_root_topic = read_mqtt_config()["mqtt_root_topic"]
mqtt_clientid = mqtt_clientid_prefix + esp_id
c = MQTTClient(mqtt_clientid, mqtt_host, ssl=mqtt_ssl)
c.set_callback(mqtt_sub)
lcd.move_to(14, 0)
try:
if c.connect() == 0:
def setup():
printOctopus()
print("Hello, this will help you initialize your ESP")
print("ver: " + ver + " (c)octopusLAB")
print("Press Ctrl+C to abort")
# TODO improve this
# prepare directory
if 'config' not in uos.listdir():
uos.mkdir('config')
run = True
while run:
sele = setupMenu()
if sele == "x":
print("Setup - exit >")
time.sleep_ms(2000)
print("all OK, press CTRL+D to soft reboot")
run = False
if sele == "w":
from util.wifi_connect import WiFiConnect
w = WiFiConnect()
sel_w = wifiMenu()
if sel_w == "a":
wifi_ssid = input("SSID: ")
wifi_pass = input("PASSWORD: "******"r":
wifi_ssid = input("SSID: ")
w.remove_network(wifi_ssid)
if sel_w == "s":
print("Saved wifi networks")
for k, v in w.config['networks'].items():
print("SSID: {0}".format(k))
if sele == "cw":
print("Connect WiFi >")
from util.wifi_connect import WiFiConnect
w = WiFiConnect()
if w.connect():
print("WiFi: OK")
else:
print("WiFi: Connect error, check configuration")
if sele == "cl":
print("Connect LAN >")
import network
lan = network.LAN(mdc=machine.Pin(23),
mdio=machine.Pin(18),
phy_type=network.PHY_LAN8720,
phy_addr=1,
clock_mode=network.ETH_CLOCK_GPIO17_OUT)
lan.active(1)
retry = 0
while not lan.isconnected() or lan.ifconfig()[0] is '0.0.0.0':
retry += 1
time.sleep_ms(500)
if retry > 20:
break
if lan.isconnected():
print("LAN: OK")
else:
print("LAN: Connect error, check cable or DHCP server")
if sele == "sd":
shutil()
deplUrl = "https://octopusengine.org/download/micropython/stable.tar"
deploy(deplUrl)
if iurl is None:
raise Exception(
"Config error: InfluxDB URL is not set. Check configuration")
if idb is None:
raise Exception(
"Config error: InfluxDB Database is not set. Check configuration")
if imetric is None:
raise Exception("Config error: InfluxDB Metric is not set")
influx = InfluxDB(iurl, idb, iusr, ipsw, imetric, place=iplace)
print("influx: ", iurl, idb)
except Exception as e:
print("config Exception: {0}".format(e))
print("Use config.setup()")
exit(1)
display = disp7_init()
display.show("wifiConn")
net = WiFiConnect()
net.connect()
display.show("timer on")
tim1 = Timer(0) # for main 10 sec timer
timer_init(tim1)
# --- run ---
print("--- run --- RAM free: " + str(mem_free()))
f = open('config/wifi.json', 'r')
d = f.read()
f.close()
j = json.loads(d)
ssid = j["wifi_ssid"]
time.sleep_ms(1000)
simple_blink_pause()
oled.text("wifi_conf OK", x0, y1)
oled.show()
oled.text("wifi_conn", x0, y2)
oled.show()
w = WiFiConnect()
w.connect(ssid, j["wifi_pass"])
time.sleep_ms(1000)
simple_blink_pause()
oled.text("wifi_conn OK", x0, y2)
oled.show()
i = 0
while True:
r3 = urequests.post(wwwserver)
j = json.loads(r3.text)
time.sleep_ms(3000)
rgb = j["led"]
oled.fill(0)
oled.text("octopusLAB", x0, y0)
kp = keypad(i2c, KP_ADDRESS)
if isButton:
print("Initializing Button, delay {0}".format(BTN_Delay))
btn = Pin(pinout.DEV2_PIN, Pin.IN, Pin.PULL_UP)
#btn.irq(trigger=Pin.IRQ_FALLING | Pin.IRQ_RISING, handler=handleButton)
printLog(4, "wifi and mqtt >")
printFree()
print("wifi_config >")
wifi = WiFiConnect(wifi_retries)
wifi.events_add_connecting(connecting_callback)
wifi.events_add_connected(connected_callback)
print("wifi.connect")
wifi_status = wifi.connect()
# url config: TODO > extern.
if isMqtt:
from umqtt.simple import MQTTClient
print("mqtt_config >")
mqtt_clientid_prefix = read_mqtt_config()["mqtt_clientid_prefix"]
mqtt_host = read_mqtt_config()["mqtt_broker_ip"]
mqtt_root_topic = read_mqtt_config()["mqtt_root_topic"]
#mqtt_ssl = False # Consider to use TLS!
mqtt_ssl = read_mqtt_config()["mqtt_ssl"]
mqtt_clientid = mqtt_clientid_prefix + esp_id
c = MQTTClient(mqtt_clientid, mqtt_host, ssl=mqtt_ssl)
c.set_callback(mqtt_sub)
def setup():
mainOctopus()
print("Hello, this will help you initialize your ESP")
print(ver)
print("Press Ctrl+C to abort")
# TODO improve this
# prepare directory
if 'config' not in uos.listdir():
uos.makedirs('config')
run= True
while run:
sele = setupMenu()
if sele == "e":
print("Setup - exit >")
time.sleep_ms(2000)
print("all OK, press CTRL+D to soft reboot")
run = False
if sele == "si": #system_info()
from util.sys_info import sys_info
sys_info()
if sele == "ds":
print("Device setting:")
print(" board_type | soc_type (system on the board)")
i=0
for di in devices:
print(str(i)+": "+str(di[0]) + " | " + str(di[1]))
i=i+1
print()
sd = input("select: ")
#print(str(devices[int(sd)]))
print("> " + str(devices[int(sd)][0]) + " | " + str(devices[int(sd)][1]))
dc = {}
dc['board_type'] = str(devices[int(sd)][0]) #input("Board type ('oLAB RobotBoard1' or 'oLAB IoTBoard1'): ")
dc['soc_type'] = str(devices[int(sd)][1]) #input("SoC type ('esp32' or 'esp8266'): ")
print("Writing to file config/device.json")
with open('config/device.json', 'w') as f:
ujson.dump(dc, f)
# ujson.dump(wc, f, ensure_ascii=False, indent=4)
if sele == "sw":
print("Set WiFi >")
print()
wc = {}
wc['wifi_ssid'] = input("SSID: ")
wc['wifi_pass'] = input("PASSWORD: "******"Writing to file config/wifi.json")
with open('config/wifi.json', 'w') as f:
ujson.dump(wc, f)
# ujson.dump(wc, f, ensure_ascii=False, indent=4)
if sele == "cw":
print("Connect WiFi >")
from util.wifi_connect import read_wifi_config, WiFiConnect
time.sleep_ms(1000)
wifi_config = read_wifi_config()
print("config for: " + wifi_config["wifi_ssid"])
w = WiFiConnect()
w.connect(wifi_config["wifi_ssid"], wifi_config["wifi_pass"])
print("WiFi: OK")
if sele == "mq":
print("Set mqtt >")
print()
mq = {}
mq['mqtt_broker_ip'] = input("BROKER IP: ")
mq['mqtt_ssl'] = input("> SSL (0/1): ")
mq['mqtt_port'] = input("> PORT (1883/8883/?): ")
mq['mqtt_clientid_prefix'] = input("CLIENT PREFIX: ")
mq['mqtt_root_topic'] = input("ROOT TOPIC: ")
# TODO improve this
if 'config' not in uos.listdir():
uos.makedirs('config')
print("Writing to file config/mqtt.json")
with open('config/mqtt.json', 'w') as f:
ujson.dump(mq, f)
if sele == "st":
print("Time setting >")
rtc = machine.RTC()
print(str(rtc.datetime()))
setdatetime = input("input 6 numbers - format: RRRRR,M,D,wd,h,m > ")+(",0,0")
dt_str = setdatetime.split(",")
print(str(dt_str))
dt_int = [int(numeric_string) for numeric_string in dt_str]
rtc.init(dt_int)
print(str(rtc.datetime()))
if sele == "sdp":
shutil()
deplUrl = "http://iot.petrkr.net/olab/latest.tar"
deploy(deplUrl)
if sele == "sdo":
shutil()
#deplUrl = "http://octopuslab.cz/download/latest.tar"
deplUrl = "http://octopusengine.org/download/latest.tar"
deploy(deplUrl)
if sele == "o":
from util.octopus import octopus
octopus()
def setup():
mainOctopus()
print("Hello, this will help you initialize your ESP")
print("ver: " + ver + " (c)octopusLAB")
print("Press Ctrl+C to abort")
# TODO improve this
# prepare directory
if 'config' not in uos.listdir():
uos.mkdir('config')
run = True
while run:
sele = setupMenu()
if sele == "q":
print("Setup - quit >")
time.sleep_ms(1000)
print("all OK, press CTRL+D to soft reboot")
run = False
if sele == "si": #system_info()
from util.sys_info import sys_info
sys_info()
if sele == "ds":
print("Device setting:")
print(" board_type | soc_type (system on the board)")
i = 0
for di in devices:
print(str(i) + ": " + str(di[0]) + " | " + str(di[1]))
i = i + 1
print()
sd = input("select: ")
#print(str(devices[int(sd)]))
print("> " + str(devices[int(sd)][0]) + " | " +
str(devices[int(sd)][1]))
dc = {}
dc['board_type'] = str(
devices[int(sd)][0]
) #input("Board type ('oLAB RobotBoard1' or 'oLAB IoTBoard1'): ")
dc['soc_type'] = str(devices[int(
sd)][1]) #input("SoC type ('esp32' or 'esp8266'): ")
print("Writing to file config/device.json")
with open('config/device.json', 'w') as f:
ujson.dump(dc, f)
# ujson.dump(wc, f, ensure_ascii=False, indent=4)
if sele == "ios":
print("I/O setting:")
# io menu
ioMenu()
if sele == "iot":
print("Testing I/O")
from util import io_test
io_test.all()
if sele == "w":
from util.wifi_connect import WiFiConnect
w = WiFiConnect()
sel_w = wifiMenu()
if sel_w == "a":
wifi_ssid = input("SSID: ")
wifi_pass = input("PASSWORD: "******"r":
wifi_ssid = input("SSID: ")
w.remove_network(wifi_ssid)
if sel_w == "s":
print("Saved wifi networks")
for k, v in w.config['networks'].items():
print("SSID: {0}".format(k))
if sele == "cw":
print("Connect WiFi >")
from util.wifi_connect import WiFiConnect
w = WiFiConnect()
if w.connect():
print("WiFi: OK")
else:
print("WiFi: Connect error, check configuration")
if sele == "cl":
print("Connect LAN >")
import network
lan = network.LAN(mdc=machine.Pin(23),
mdio=machine.Pin(18),
phy_type=network.PHY_LAN8720,
phy_addr=1,
clock_mode=network.ETH_CLOCK_GPIO17_OUT)
lan.active(1)
retry = 0
while not lan.isconnected() or lan.ifconfig()[0] is '0.0.0.0':
retry += 1
time.sleep_ms(500)
if retry > 20:
break
if lan.isconnected():
print("LAN: OK")
else:
print("LAN: Connect error, check cable or DHCP server")
if sele == "mq":
print("mqtt setup >")
try:
print()
from util.mqtt import mqtt
mqtt()
except:
print("Err.mqtt() or 'util.mqtt.py' does not exist")
if sele == "st":
print("Time setting >")
rtc = machine.RTC()
print(str(rtc.datetime()))
setdatetime = input(
"input 6 numbers - format: RRRRR,M,D,wd,h,m > ") + (",0,0")
dt_str = setdatetime.split(",")
print(str(dt_str))
dt_int = [int(numeric_string) for numeric_string in dt_str]
rtc.init(dt_int)
print(str(rtc.datetime()))
if sele == "sd":
shutil()
deplUrl = "https://octopusengine.org/download/micropython/stable.tar"
deploy(deplUrl)
if sele == "sde":
shutil()
deplUrl = "https://octopusengine.org/download/micropython/examples.tar"
deploy(deplUrl)
if sele == "sdp":
shutil()
deplUrl = "http://iot.petrkr.net/olab/latest.tar"
deploy(deplUrl)
if sele == "sdo":
shutil()
deplUrl = "https://octopusengine.org/download/latest.tar"
deploy(deplUrl)
if sele == "sdh":
shutil()
deplUrl = "https://octopusengine.org/download/hydroponics.tar"
deploy(deplUrl)
if sele == "wr":
print("under reconstruction <")
import esp
esp.osdebug(None)
import webrepl
webrepl.start()
def mqtt():
mainOctopus()
print("Hello, this will help you initialize MQTT client")
print("ver: " + ver + " (c)octopusLAB")
print("id: " + esp_id)
print("Press Ctrl+C to abort")
# TODO improve this
# prepare directory
if 'config' not in uos.listdir():
uos.makedirs('config')
run = True
while run:
sele = setupMenu()
if sele == "x":
print("Setup - exit >")
time.sleep_ms(2000)
print("all OK, press CTRL+D to soft reboot")
run = False
if sele == "si": #system_info()
from util.sys_info import sys_info
sys_info()
if sele == "cv":
print("------- Set 0/1/str for settings ------")
wc = {}
wc['name'] = input("device (host)name/describe: ")
wc['time'] = int(input("get time from server? [1/0]: "))
wc['mysql'] = int(input("send data to mysql db [1/0]: "))
if wc['mysql']: wc['mysqlURL'] = input("mysql Write URL: ")
wc['mqtt'] = int(input("mqtt client [1/0]: "))
wc['influx'] = int(input("send data to influx db [1/0]: "))
if wc['influx']: wc['influxWriteURL'] = input("influx Write URL: ")
wc['timer'] = int(input("timer: "))
print("Writing to file config/mqtt_io.json")
with open('config/mqtt_io.json', 'w') as f:
ujson.dump(wc, f)
if sele == "ms":
print("Set mqtt >")
print()
mq = {}
mq['mqtt_broker_ip'] = input("BROKER IP: ")
mq['mqtt_ssl'] = int(input("> SSL (0/1): "))
mq['mqtt_port'] = int(input("> PORT (1883/8883/?): "))
mq['mqtt_clientid_prefix'] = input("CLIENT PREFIX: ")
mq_user = input("Username: "******"" else mq_user
mq_pass = input("Password: "******"" else mq_pass
mq['mqtt_root_topic'] = input("ROOT TOPIC: ")
print("Writing to file config/mqtt.json")
with open('config/mqtt.json', 'w') as f:
ujson.dump(mq, f)
def mqtt_sub(topic, msg):
print("MQTT Topic {0}: {1}".format(topic, msg))
if sele == "mt":
print("mqtt simple test:")
print("wifi_config >")
wifi = WiFiConnect(250)
wifi.events_add_connecting(connecting_callback)
wifi.events_add_connected(connected_callback)
print("wifi.connect")
wifi_status = wifi.connect()
# url config: TODO > extern.
print("mqtt_config >")
mqtt_clientid_prefix = read_mqtt_config()["mqtt_clientid_prefix"]
mqtt_host = read_mqtt_config()["mqtt_broker_ip"]
mqtt_root_topic = read_mqtt_config()["mqtt_root_topic"]
mqtt_ssl = read_mqtt_config()["mqtt_ssl"]
mqtt_user = read_mqtt_config()["mqtt_user"]
mqtt_pass = read_mqtt_config()["mqtt_pass"]
mqtt_clientid = mqtt_clientid_prefix + esp_id
c = MQTTClient(mqtt_clientid,
mqtt_host,
ssl=mqtt_ssl,
user=mqtt_user,
password=mqtt_pass)
c.set_callback(mqtt_sub)
print("mqtt.connect to " + mqtt_host)
c.connect()
"""
# c.subscribe("/octopus/device/{0}/#".format(esp_id))
subStr = mqtt_root_topic+"/"+esp_id+"/#"
print("subscribe (root topic + esp id):" + subStr)
c.subscribe(subStr)
"""
mqtt_log_topic = mqtt_root_topic + "/log"
print("mqtt log > " + mqtt_log_topic)
print(mqtt_log_topic)
# mqtt_root_topic_temp = "octopus/device"
c.publish(mqtt_log_topic,
esp_id) # topic, message (value) to publish
def setup():
print("Hello, this will help you initialize your ESP")
print("Press Ctrl+C to abort")
print()
# TODO improve this
# prepare directory
if 'config' not in uos.listdir():
uos.makedirs('config')
run= True
while run:
sele = setupMenu()
if sele == "e":
print("Setup - exit >")
time.sleep_ms(2000)
print("all OK, press CTRL+D to soft reboot")
run = False
if sele == "si": #system_info()
from util.sys_info import sys_info
sys_info()
if sele == "ds":
print("Device setting:")
print(" board_type | soc_type (system on the board)")
i=0
for di in devices:
print(str(i)+": "+str(di[0]) + " | " + str(di[1]))
i=i+1
print()
sd = input("select: ")
#print(str(devices[int(sd)]))
print("> " + str(devices[int(sd)][0]) + " | " + str(devices[int(sd)][1]))
dc = {}
dc['board_type'] = str(devices[int(sd)][0]) #input("Board type ('oLAB RobotBoard1' or 'oLAB IoTBoard1'): ")
dc['soc_type'] = str(devices[int(sd)][1]) #input("SoC type ('esp32' or 'esp8266'): ")
print("Writing to file config/device.json")
with open('config/device.json', 'w') as f:
ujson.dump(dc, f)
# ujson.dump(wc, f, ensure_ascii=False, indent=4)
if sele == "sw":
print("Set WiFi >")
print()
wc = {}
wc['wifi_ssid'] = input("SSID: ")
wc['wifi_pass'] = input("PASSWORD: "******"Writing to file config/wifi.json")
with open('config/wifi.json', 'w') as f:
ujson.dump(wc, f)
# ujson.dump(wc, f, ensure_ascii=False, indent=4)
if sele == "cw":
print("Connect WiFi >")
from util.wifi_connect import read_wifi_config, WiFiConnect
time.sleep_ms(1000)
wifi_config = read_wifi_config()
print("config for: " + wifi_config["wifi_ssid"])
w = WiFiConnect()
w.connect(wifi_config["wifi_ssid"], wifi_config["wifi_pass"])
print("WiFi: OK")
if sele == "st":
print("Time setting >")
rtc = machine.RTC()
print(str(rtc.datetime()))
setdatetime = input("input 6 numbers - format: RRRRR,M,D,wd,h,m > ")+(",0,0")
dt_str = setdatetime.split(",")
print(str(dt_str))
dt_int = [int(numeric_string) for numeric_string in dt_str]
rtc.init(dt_int)
print(str(rtc.datetime()))
if sele == "sd":
print("System download > (initial octopus modules)")
import upip
print("Installing shutil")
upip.install("micropython-shutil")
print("Running deploy")
#deplUrl = "http://iot.petrkr.net/olab/latest.tar"
#deplUrl = "http://octopuslab.cz/download/latest.tar"
deplUrl = "http://octopusengine.org/download/latest.tar"
deploy(deplUrl)
# print(sta.ifconfig())
def connecting_callback():
simple_blink(0.2)
# Load config
# TODO move to separate module
def load_wifi_config():
# TODO check format
try:
with open("config/wifi.json", "r") as entry:
result = ujson.load(entry)
except OSError as ex:
return None
else:
entry.close()
return result
w = WiFiConnect()
w.events_add_connecting(connecting_callback)
w.events_add_connected(connected_callback)
wc = load_wifi_config()
if wc:
w.connect(wc['wifi_ssid'], wc['wifi_pass'])
else:
oled.text("No wifi config. Run setup().", 2, 50)
oled.show()