def drive_APMrover2(viewerip=None):
'''drive APMrover2 in SIL
you can pass viewerip as an IP address to optionally send fg and
mavproxy packets too for local viewing of the mission in real time
'''
global homeloc
options = '--sitl=127.0.0.1:5501 --out=127.0.0.1:19550 --streamrate=10'
if viewerip:
options += " --out=%s:14550" % viewerip
sil = util.start_SIL('APMrover2', wipe=True)
mavproxy = util.start_MAVProxy_SIL('APMrover2', options=options)
mavproxy.expect('Received [0-9]+ parameters')
# setup test parameters
mavproxy.send('param set SYSID_THISMAV %u\n' % random.randint(100, 200))
mavproxy.send("param load %s/Rover.parm\n" % testdir)
mavproxy.expect('Loaded [0-9]+ parameters')
# restart with new parms
util.pexpect_close(mavproxy)
util.pexpect_close(sil)
sim_cmd = util.reltopdir('Tools/autotest/pysim/sim_rover.py') + ' --rate=50 --home=%f,%f,%u,%u' % (
HOME.lat, HOME.lng, HOME.alt, HOME.heading)
runsim = pexpect.spawn(sim_cmd, logfile=sys.stdout, timeout=10)
runsim.delaybeforesend = 0
util.pexpect_autoclose(runsim)
runsim.expect('Starting at lat')
sil = util.start_SIL('APMrover2')
mavproxy = util.start_MAVProxy_SIL('APMrover2', options=options)
mavproxy.expect('Logging to (\S+)')
logfile = mavproxy.match.group(1)
print("LOGFILE %s" % logfile)
buildlog = util.reltopdir("../buildlogs/APMrover2-test.mavlog")
print("buildlog=%s" % buildlog)
if os.path.exists(buildlog):
os.unlink(buildlog)
os.link(logfile, buildlog)
mavproxy.expect('Received [0-9]+ parameters')
util.expect_setup_callback(mavproxy, expect_callback)
expect_list_clear()
expect_list_extend([runsim, sil, mavproxy])
print("Started simulator")
# get a mavlink connection going
try:
mav = mavutil.mavlink_connection('127.0.0.1:19550', robust_parsing=True)
except Exception, msg:
print("Failed to start mavlink connection on 127.0.0.1:19550" % msg)
raise
def build_examples():
'''run the build_examples.sh script'''
print("Running build_examples.sh")
if util.run_cmd(util.reltopdir('Tools/scripts/build_examples.sh'), dir=util.reltopdir('.')) != 0:
print("Failed build_examples.sh")
return False
return True
def build_examples():
"""run the build_examples.sh script"""
print("Running build_examples.sh")
if util.run_cmd(util.reltopdir("Tools/scripts/build_examples.sh"), dir=util.reltopdir(".")) != 0:
print("Failed build_examples.sh")
return False
return True
def write_XMLresults(atype, results):
'''write XML JUnit results'''
from pymavlink.generator import mavtemplate
t = mavtemplate.MAVTemplate()
for x in glob.glob(util.reltopdir('Tools/autotest/junit.xml')):
junit_xml = util.loadfile(x)
f = open(util.reltopdir("../buildlogs/%s-%s" % (atype, os.path.basename(x))), mode='w')
t.write(f, junit_xml, results)
f.close()
def fly_ArduCopter_scripted(testname):
'''fly ArduCopter in SIL
'''
global homeloc
sim_cmd = util.reltopdir('Tools/autotest/pysim/sim_multicopter.py') + ' --frame=%s --rate=400 --home=%f,%f,%u,%u' % (
FRAME, HOME.lat, HOME.lng, HOME.alt, HOME.heading)
sim_cmd += ' --wind=6,45,.3'
sil = util.start_SIL('ArduCopter', wipe=True)
mavproxy = util.start_MAVProxy_SIL('ArduCopter', options='--sitl=127.0.0.1:5501 --out=127.0.0.1:19550 --quadcopter')
mavproxy.expect('Received [0-9]+ parameters')
# setup test parameters
mavproxy.send('param set SYSID_THISMAV %u\n' % random.randint(100, 200))
mavproxy.send("param load %s/ArduCopter.parm\n" % testdir)
mavproxy.expect('Loaded [0-9]+ parameters')
# reboot with new parameters
util.pexpect_close(mavproxy)
util.pexpect_close(sil)
sil = util.start_SIL('ArduCopter', height=HOME.alt)
sim = pexpect.spawn(sim_cmd, logfile=sys.stdout, timeout=10)
sim.delaybeforesend = 0
util.pexpect_autoclose(sim)
options = '--sitl=127.0.0.1:5501 --out=127.0.0.1:19550 --quadcopter --streamrate=5'
mavproxy = util.start_MAVProxy_SIL('ArduCopter', options=options)
mavproxy.expect('Logging to (\S+)')
logfile = mavproxy.match.group(1)
print("LOGFILE %s" % logfile)
buildlog = util.reltopdir("../buildlogs/ArduCopter-test.tlog")
print("buildlog=%s" % buildlog)
if os.path.exists(buildlog):
os.unlink(buildlog)
os.link(logfile, buildlog)
# the received parameters can come before or after the ready to fly message
mavproxy.expect(['Received [0-9]+ parameters', 'Ready to FLY'])
mavproxy.expect(['Received [0-9]+ parameters', 'Ready to FLY'])
util.expect_setup_callback(mavproxy, arducopter.expect_callback)
expect_list_clear()
expect_list_extend([sim, sil, mavproxy])
# get a mavlink connection going
try:
mav = mavutil.mavlink_connection('127.0.0.1:19550', robust_parsing=True)
except Exception, msg:
print("Failed to start mavlink connection on 127.0.0.1:19550" % msg)
raise
def build_all():
'''run the build_all.sh script'''
print("Running build_all.sh")
flags = ""
if opts.incremental == True:
print("Building for incremental")
flags = "-i"
if util.run_cmd(util.reltopdir('Tools/scripts/build_all.sh') + " " + flags , dir=util.reltopdir('.')) != 0:
print("Failed build_all.sh")
return False
return True
def write_webresults(results):
'''write webpage results'''
from pymavlink.generator import mavtemplate
t = mavtemplate.MAVTemplate()
for h in glob.glob(util.reltopdir('Tools/autotest/web/*.html')):
html = util.loadfile(h)
f = open("buildlogs/%s" % os.path.basename(h), mode='w')
t.write(f, html, results)
f.close()
for f in glob.glob(util.reltopdir('Tools/autotest/web/*.png')):
shutil.copy(f, 'buildlogs/%s' % os.path.basename(f))
def convert_gpx():
'''convert any mavlog files to GPX and KML'''
import glob
mavlog = glob.glob(util.reltopdir("../buildlogs/*.mavlog"))
for m in mavlog:
util.run_cmd(util.reltopdir("../mavlink/pymavlink/examples/mavtogpx.py") + " --nofixcheck " + m)
gpx = m + '.gpx'
kml = m + '.kml'
util.run_cmd('gpsbabel -i gpx -f %s -o kml,units=m,floating=1,extrude=1 -F %s' % (gpx, kml), checkfail=False)
util.run_cmd('zip %s.kmz %s.kml' % (m, m), checkfail=False)
return True
def write_webresults(results):
'''write webpage results'''
from pymavlink.generator import mavtemplate
t = mavtemplate.MAVTemplate()
for h in glob.glob(util.reltopdir('Tools/autotest/web/*.html')):
html = util.loadfile(h)
f = open(util.reltopdir("../buildlogs/%s" % os.path.basename(h)),
mode='w')
t.write(f, html, results)
f.close()
for f in glob.glob(util.reltopdir('Tools/autotest/web/*.png')):
shutil.copy(f, util.reltopdir('../buildlogs/%s' % os.path.basename(f)))
def write_webresults(results):
"""write webpage results"""
from pymavlink.generator import mavtemplate
t = mavtemplate.MAVTemplate()
for h in glob.glob(util.reltopdir("Tools/autotest/web/*.html")):
html = util.loadfile(h)
f = open(util.reltopdir("../buildlogs/%s" % os.path.basename(h)), mode="w")
t.write(f, html, results)
f.close()
for f in glob.glob(util.reltopdir("Tools/autotest/web/*.png")):
shutil.copy(f, util.reltopdir("../buildlogs/%s" % os.path.basename(f)))
def write_webresults(results):
'''write webpage results'''
sys.path.insert(0, os.path.join(util.reltopdir("../mavlink/pymavlink/generator")))
import mavtemplate
t = mavtemplate.MAVTemplate()
for h in glob.glob(util.reltopdir('Tools/autotest/web/*.html')):
html = util.loadfile(h)
f = open(util.reltopdir("../buildlogs/%s" % os.path.basename(h)), mode='w')
t.write(f, html, results)
f.close()
for f in glob.glob(util.reltopdir('Tools/autotest/web/*.png')):
shutil.copy(f, util.reltopdir('../buildlogs/%s' % os.path.basename(f)))
def convert_gpx():
'''convert any tlog files to GPX and KML'''
import glob
mavlog = glob.glob(util.reltopdir("../buildlogs/*.tlog"))
for m in mavlog:
util.run_cmd(util.reltopdir("modules/mavlink/pymavlink/tools/mavtogpx.py") + " --nofixcheck " + m)
gpx = m + '.gpx'
kml = m + '.kml'
util.run_cmd('gpsbabel -i gpx -f %s -o kml,units=m,floating=1,extrude=1 -F %s' % (gpx, kml), checkfail=False)
util.run_cmd('zip %s.kmz %s.kml' % (m, m), checkfail=False)
util.run_cmd("mavflightview.py --imagefile=%s.png %s" % (m,m))
return True
def convert_gpx():
"""convert any tlog files to GPX and KML"""
import glob
mavlog = glob.glob(util.reltopdir("../buildlogs/*.tlog"))
for m in mavlog:
util.run_cmd(util.reltopdir("modules/mavlink/pymavlink/tools/mavtogpx.py") + " --nofixcheck " + m)
gpx = m + ".gpx"
kml = m + ".kml"
util.run_cmd("gpsbabel -i gpx -f %s -o kml,units=m,floating=1,extrude=1 -F %s" % (gpx, kml), checkfail=False)
util.run_cmd("zip %s.kmz %s.kml" % (m, m), checkfail=False)
util.run_cmd("mavflightview.py --imagefile=%s.png %s" % (m, m))
return True
def build_devrelease():
'''run the build_devrelease.sh script'''
print("Running build_devrelease.sh")
import shutil
# copy the script as it changes git branch, which can change the script while running
orig=util.reltopdir('Tools/scripts/build_devrelease.sh')
copy=util.reltopdir('./build_devrelease.sh')
shutil.copyfile(orig, copy)
shutil.copymode(orig, copy)
if util.run_cmd(copy, dir=util.reltopdir('.')) != 0:
print("Failed build_devrelease.sh")
return False
return True
def convert_gpx():
print( "===== Converting buildlogs/*.tlog ====" )
'''convert any tlog files to GPX and KML'''
import glob
mavlog = glob.glob(util.reltopdir("../buildlogs/*.tlog"))
for m in mavlog:
util.run_cmd(util.reltopdir("../mavlink/pymavlink/tools/mavtogpx.py") + " --nofixcheck " + m)
gpx = m + '.gpx'
kml = m + '.kml'
util.run_cmd('gpsbabel -i gpx -f %s -o kml,units=m,floating=1,extrude=1 -F %s' % (gpx, kml), checkfail=False)
util.run_cmd('zip %s.kmz %s.kml' % (m, m), checkfail=False)
util.run_cmd("mavflightview.py --imagefile=%s.png %s" % (m,m))
return True
def test_prerequesites():
'''check we have the right directories and tools to run tests'''
print("Testing prerequesites")
util.mkdir_p(util.reltopdir('../buildlogs'))
if not os.path.exists(util.reltopdir('../HILTest/hil_quad.py')):
print('''
You need to install HILTest in %s
You can get it from git://git.samba.org/tridge/UAV/HILTest.git
''' % util.reltopdir('../HILTest'))
return False
return True
def build_devrelease():
'''run the build_devrelease.sh script'''
print("Running build_devrelease.sh")
import shutil
# copy the script as it changes git branch, which can change the script while running
orig=util.reltopdir('Tools/scripts/build_devrelease.sh')
copy=util.reltopdir('./build_devrelease.sh')
shutil.copyfile(orig, copy)
shutil.copymode(orig, copy)
if util.run_cmd(copy, dir=util.reltopdir('.')) != 0:
print("Failed build_devrelease.sh")
return False
return True
def test_prerequesites():
'''check we have the right directories and tools to run tests'''
print("Testing prerequesites")
util.mkdir_p(util.reltopdir('../buildlogs'))
if not os.path.exists(util.reltopdir('../HILTest/hil_quad.py')):
print('''
You need to install HILTest in %s
You can get it from git://git.samba.org/tridge/UAV/HILTest.git
''' % util.reltopdir('../HILTest'))
return False
return True
def write_XMLresults(atype, results):
'''write XML JUnit results'''
sys.path.insert(
0, os.path.join(util.reltopdir("../mavlink/pymavlink/generator")))
import mavtemplate
t = mavtemplate.MAVTemplate()
for x in glob.glob(util.reltopdir('Tools/autotest/junit.xml')):
junit_xml = util.loadfile(x)
f = open(util.reltopdir("../buildlogs/%s-%s" %
(atype, os.path.basename(x))),
mode='w')
t.write(f, junit_xml, results)
f.close()
def build_binaries():
"""run the build_binaries.sh script"""
print("Running build_binaries.sh")
import shutil
# copy the script as it changes git branch, which can change the script while running
orig = util.reltopdir("Tools/scripts/build_binaries.sh")
copy = util.reltopdir("./build_binaries.sh")
shutil.copyfile(orig, copy)
shutil.copymode(orig, copy)
if util.run_cmd(copy, dir=util.reltopdir(".")) != 0:
print("Failed build_binaries.sh")
return False
return True
def binary_path(step, debug=False):
if step.find("ArduCopter") != -1:
binary_name = "arducopter-quad"
elif step.find("ArduPlane") != -1:
binary_name = "arduplane"
elif step.find("APMrover2") != -1:
binary_name = "ardurover"
elif step.find("AntennaTracker") != -1:
binary_name = "antennatracker"
elif step.find("CopterAVC") != -1:
binary_name = "arducopter-heli"
elif step.find("QuadPlane") != -1:
binary_name = "arduplane"
else:
# cope with builds that don't have a specific binary
return None
if debug:
binary_basedir = "sitl-debug"
else:
binary_basedir = "sitl"
binary = util.reltopdir(os.path.join('build', binary_basedir, 'bin', binary_name))
if not os.path.exists(binary):
if os.path.exists(binary + ".exe"):
binary_path += ".exe"
else:
raise ValueError("Binary (%s) does not exist" % (binary,))
return binary
def get_default_params(atype, binary):
'''get default parameters'''
# use rover simulator so SITL is not starved of input
from pymavlink import mavutil
HOME=mavutil.location(40.071374969556928,-105.22978898137808,1583.702759,246)
if binary.find("plane") != -1 or binary.find("rover") != -1:
frame = "rover"
else:
frame = "+"
home = "%f,%f,%u,%u" % (HOME.lat, HOME.lng, HOME.alt, HOME.heading)
sil = util.start_SIL(binary, wipe=True, model=frame, home=home, speedup=10)
mavproxy = util.start_MAVProxy_SIL(atype)
print("Dumping defaults")
idx = mavproxy.expect(['Please Run Setup', 'Saved [0-9]+ parameters to (\S+)'])
if idx == 0:
# we need to restart it after eeprom erase
util.pexpect_close(mavproxy)
util.pexpect_close(sil)
sil = util.start_SIL(binary, model=frame, home=home, speedup=10)
mavproxy = util.start_MAVProxy_SIL(atype)
idx = mavproxy.expect('Saved [0-9]+ parameters to (\S+)')
parmfile = mavproxy.match.group(1)
dest = util.reltopdir('../buildlogs/%s-defaults.parm' % atype)
shutil.copy(parmfile, dest)
util.pexpect_close(mavproxy)
util.pexpect_close(sil)
print("Saved defaults for %s to %s" % (atype, dest))
return True
def dump_logs(atype):
'''dump DataFlash logs'''
print("Dumping logs for %s" % atype)
sil = util.start_SIL(atype)
logfile = util.reltopdir('../buildlogs/%s.flashlog' % atype)
log = open(logfile, mode='w')
mavproxy = util.start_MAVProxy_SIL(atype, setup=True, logfile=log)
mavproxy.send('\n\n\n')
print("navigating menus")
mavproxy.expect(']')
mavproxy.send("logs\n")
mavproxy.expect("logs enabled:")
lognums = []
i = mavproxy.expect(["No logs", "(\d+) logs"])
if i == 0:
numlogs = 0
else:
numlogs = int(mavproxy.match.group(1))
for i in range(numlogs):
mavproxy.expect("Log (\d+)")
lognums.append(int(mavproxy.match.group(1)))
mavproxy.expect("Log]")
for i in range(numlogs):
print("Dumping log %u (i=%u)" % (lognums[i], i))
mavproxy.send("dump %u\n" % lognums[i])
mavproxy.expect("logs enabled:", timeout=120)
mavproxy.expect("Log]")
util.pexpect_close(mavproxy)
util.pexpect_close(sil)
log.close()
print("Saved log for %s to %s" % (atype, logfile))
return True
def dump_logs(atype):
'''dump DataFlash logs'''
print("Dumping logs for %s" % atype)
sil = util.start_SIL(atype)
logfile = util.reltopdir('../buildlogs/%s.flashlog' % atype)
log = open(logfile, mode='w')
mavproxy = util.start_MAVProxy_SIL(atype, setup=True, logfile=log)
mavproxy.send('\n\n\n')
print("navigating menus")
mavproxy.expect(']')
mavproxy.send("logs\n")
mavproxy.expect("logs enabled:")
lognums = []
i = mavproxy.expect(["No logs", "(\d+) logs"])
if i == 0:
numlogs = 0
else:
numlogs = int(mavproxy.match.group(1))
for i in range(numlogs):
mavproxy.expect("Log (\d+),")
lognums.append(int(mavproxy.match.group(1)))
mavproxy.expect("Log]")
for i in range(numlogs):
print("Dumping log %u (i=%u)" % (lognums[i], i))
mavproxy.send("dump %u\n" % lognums[i])
mavproxy.expect("logs enabled:", timeout=120)
mavproxy.expect("Log]")
util.pexpect_close(mavproxy)
util.pexpect_close(sil)
log.close()
print("Saved log for %s to %s" % (atype, logfile))
return True
def fly_CopterAVC(binary, viewerip=None, map=False, valgrind=False, gdb=False):
"""fly ArduCopter in SIL for AVC2013 mission
"""
global homeloc
home = "%f,%f,%u,%u" % (AVCHOME.lat, AVCHOME.lng, AVCHOME.alt, AVCHOME.heading)
sil = util.start_SIL(binary, wipe=True, model="heli", home=home, speedup=speedup_default)
mavproxy = util.start_MAVProxy_SIL("ArduCopter", options="--sitl=127.0.0.1:5501 --out=127.0.0.1:19550")
mavproxy.expect("Received [0-9]+ parameters")
# setup test parameters
mavproxy.send("param load %s/Helicopter.parm\n" % testdir)
mavproxy.expect("Loaded [0-9]+ parameters")
mavproxy.send("param set LOG_REPLAY 1\n")
mavproxy.send("param set LOG_DISARMED 1\n")
time.sleep(3)
# reboot with new parameters
util.pexpect_close(mavproxy)
util.pexpect_close(sil)
sil = util.start_SIL(binary, model="heli", home=home, speedup=speedup_default, valgrind=valgrind, gdb=gdb)
options = "--sitl=127.0.0.1:5501 --out=127.0.0.1:19550 --streamrate=5"
if viewerip:
options += " --out=%s:14550" % viewerip
if map:
options += " --map"
mavproxy = util.start_MAVProxy_SIL("ArduCopter", options=options)
mavproxy.expect("Telemetry log: (\S+)")
logfile = mavproxy.match.group(1)
print("LOGFILE %s" % logfile)
buildlog = util.reltopdir("../buildlogs/CopterAVC-test.tlog")
print("buildlog=%s" % buildlog)
if os.path.exists(buildlog):
os.unlink(buildlog)
try:
os.link(logfile, buildlog)
except Exception:
pass
# the received parameters can come before or after the ready to fly message
mavproxy.expect(["Received [0-9]+ parameters", "Ready to FLY"])
mavproxy.expect(["Received [0-9]+ parameters", "Ready to FLY"])
util.expect_setup_callback(mavproxy, expect_callback)
expect_list_clear()
expect_list_extend([sil, mavproxy])
if map:
mavproxy.send("map icon 40.072467969730496 -105.2314389590174\n")
mavproxy.send("map icon 40.072600990533829 -105.23146100342274\n")
# get a mavlink connection going
try:
mav = mavutil.mavlink_connection("127.0.0.1:19550", robust_parsing=True)
except Exception, msg:
print("Failed to start mavlink connection on 127.0.0.1:19550" % msg)
raise
def fly_CopterAVC(viewerip=None, map=False):
'''fly ArduCopter in SIL for AVC2013 mission
'''
global homeloc
if TARGET != 'sitl':
util.build_SIL('ArduCopter', target=TARGET)
home = "%f,%f,%u,%u" % (AVCHOME.lat, AVCHOME.lng, AVCHOME.alt, AVCHOME.heading)
sil = util.start_SIL('ArduCopter', wipe=True, model='heli', home=home, speedup=speedup_default)
mavproxy = util.start_MAVProxy_SIL('ArduCopter', options='--sitl=127.0.0.1:5501 --out=127.0.0.1:19550')
mavproxy.expect('Received [0-9]+ parameters')
# setup test parameters
mavproxy.send("param load %s/Helicopter.parm\n" % testdir)
mavproxy.expect('Loaded [0-9]+ parameters')
# reboot with new parameters
util.pexpect_close(mavproxy)
util.pexpect_close(sil)
sil = util.start_SIL('ArduCopter', model='heli', home=home, speedup=speedup_default)
options = '--sitl=127.0.0.1:5501 --out=127.0.0.1:19550 --streamrate=5'
if viewerip:
options += ' --out=%s:14550' % viewerip
if map:
options += ' --map'
mavproxy = util.start_MAVProxy_SIL('ArduCopter', options=options)
mavproxy.expect('Telemetry log: (\S+)')
logfile = mavproxy.match.group(1)
print("LOGFILE %s" % logfile)
buildlog = util.reltopdir("../buildlogs/CopterAVC-test.tlog")
print("buildlog=%s" % buildlog)
if os.path.exists(buildlog):
os.unlink(buildlog)
try:
os.link(logfile, buildlog)
except Exception:
pass
# the received parameters can come before or after the ready to fly message
mavproxy.expect(['Received [0-9]+ parameters', 'Ready to FLY'])
mavproxy.expect(['Received [0-9]+ parameters', 'Ready to FLY'])
util.expect_setup_callback(mavproxy, expect_callback)
expect_list_clear()
expect_list_extend([sil, mavproxy])
if map:
mavproxy.send('map icon 40.072467969730496 -105.2314389590174\n')
mavproxy.send('map icon 40.072600990533829 -105.23146100342274\n')
# get a mavlink connection going
try:
mav = mavutil.mavlink_connection('127.0.0.1:19550', robust_parsing=True)
except Exception, msg:
print("Failed to start mavlink connection on 127.0.0.1:19550" % msg)
raise
def build_parameters():
'''run the param_parse.py script'''
print("Running param_parse.py")
if util.run_cmd(util.reltopdir('Tools/autotest/param_metadata/param_parse.py'), dir=util.reltopdir('.')) != 0:
print("Failed param_parse.py")
return False
return True
def fly_CopterAVC(viewerip=None, map=False):
'''fly ArduCopter in SIL for AVC2013 mission
'''
global homeloc
if TARGET != 'sitl':
util.build_SIL('ArduCopter', target=TARGET)
home = "%f,%f,%u,%u" % (AVCHOME.lat, AVCHOME.lng, AVCHOME.alt, AVCHOME.heading)
sil = util.start_SIL('ArduCopter', wipe=True, model='heli', home=home, speedup=speedup_default)
mavproxy = util.start_MAVProxy_SIL('ArduCopter', options='--sitl=127.0.0.1:5501 --out=127.0.0.1:19550')
mavproxy.expect('Received [0-9]+ parameters')
# setup test parameters
mavproxy.send("param load %s/Helicopter.parm\n" % testdir)
mavproxy.expect('Loaded [0-9]+ parameters')
# reboot with new parameters
util.pexpect_close(mavproxy)
util.pexpect_close(sil)
sil = util.start_SIL('ArduCopter', model='heli', home=home, speedup=speedup_default)
options = '--sitl=127.0.0.1:5501 --out=127.0.0.1:19550 --streamrate=5'
if viewerip:
options += ' --out=%s:14550' % viewerip
if map:
options += ' --map'
mavproxy = util.start_MAVProxy_SIL('ArduCopter', options=options)
mavproxy.expect('Telemetry log: (\S+)')
logfile = mavproxy.match.group(1)
print("LOGFILE %s" % logfile)
buildlog = util.reltopdir("../buildlogs/CopterAVC-test.tlog")
print("buildlog=%s" % buildlog)
if os.path.exists(buildlog):
os.unlink(buildlog)
try:
os.link(logfile, buildlog)
except Exception:
pass
# the received parameters can come before or after the ready to fly message
mavproxy.expect(['Received [0-9]+ parameters', 'Ready to FLY'])
mavproxy.expect(['Received [0-9]+ parameters', 'Ready to FLY'])
util.expect_setup_callback(mavproxy, expect_callback)
expect_list_clear()
expect_list_extend([sil, mavproxy])
if map:
mavproxy.send('map icon 40.072467969730496 -105.2314389590174\n')
mavproxy.send('map icon 40.072600990533829 -105.23146100342274\n')
# get a mavlink connection going
try:
mav = mavutil.mavlink_connection('127.0.0.1:19550', robust_parsing=True)
except Exception, msg:
print("Failed to start mavlink connection on 127.0.0.1:19550" % msg)
raise
def build_parameters():
"""run the param_parse.py script"""
print("Running param_parse.py")
if util.run_cmd(util.reltopdir("Tools/autotest/param_metadata/param_parse.py"), dir=util.reltopdir(".")) != 0:
print("Failed param_parse.py")
return False
return True
def binary_path(step, debug=False):
if step.find("ArduCopter") != -1:
binary_name = "arducopter-quad"
elif step.find("ArduPlane") != -1:
binary_name = "arduplane"
elif step.find("APMrover2") != -1:
binary_name = "ardurover"
elif step.find("AntennaTracker") != -1:
binary_name = "antennatracker"
elif step.find("CopterAVC") != -1:
binary_name = "arducopter-heli"
elif step.find("QuadPlane") != -1:
binary_name = "arduplane"
else:
# cope with builds that don't have a specific binary
return None
if debug:
binary_basedir = "sitl-debug"
else:
binary_basedir = "sitl"
binary = util.reltopdir(os.path.join('build', binary_basedir, 'bin', binary_name))
if not os.path.exists(binary):
if os.path.exists(binary + ".exe"):
binary_path += ".exe"
else:
raise ValueError("Binary (%s) does not exist" % (binary,))
return binary
def get_default_params(atype):
'''get default parameters'''
# use rover simulator so SITL is not starved of input
from pymavlink import mavutil
HOME=mavutil.location(40.071374969556928,-105.22978898137808,1583.702759,246)
sim_cmd = util.reltopdir('Tools/autotest/pysim/sim_rover.py') + ' --rate=200 --speedup=100 --home=%f,%f,%u,%u' % (
HOME.lat, HOME.lng, HOME.alt, HOME.heading)
runsim = pexpect.spawn(sim_cmd, logfile=sys.stdout, timeout=10)
runsim.delaybeforesend = 0
runsim.expect('Starting at lat')
sil = util.start_SIL(atype, wipe=True)
mavproxy = util.start_MAVProxy_SIL(atype)
print("Dumping defaults")
idx = mavproxy.expect(['Please Run Setup', 'Saved [0-9]+ parameters to (\S+)'])
if idx == 0:
# we need to restart it after eeprom erase
util.pexpect_close(mavproxy)
util.pexpect_close(sil)
sil = util.start_SIL(atype)
mavproxy = util.start_MAVProxy_SIL(atype)
idx = mavproxy.expect('Saved [0-9]+ parameters to (\S+)')
parmfile = mavproxy.match.group(1)
dest = 'buildlogs/%s-defaults.parm' % atype
shutil.copy(parmfile, dest)
util.pexpect_close(mavproxy)
util.pexpect_close(sil)
util.pexpect_close(runsim)
print("Saved defaults for %s to %s" % (atype, dest))
return True
def __init__(self):
self.date = time.asctime()
self.githash = util.run_cmd('git rev-parse HEAD',
output=True,
dir=util.reltopdir('.')).strip()
self.tests = []
self.files = []
def build_parameters():
'''run the param_parse.py script'''
print("Running param_parse.py")
if util.run_cmd(util.reltopdir('Tools/autotest/param_metadata/param_parse.py'), dir=util.reltopdir('.')) != 0:
print("Failed param_parse.py")
return False
return True
def binary_path(step, debug=False):
if step.find("ArduCopter") != -1:
binary_name = "arducopter-quad"
elif step.find("ArduPlane") != -1:
binary_name = "arduplane"
elif step.find("APMrover2") != -1:
binary_name = "ardurover"
elif step.find("AntennaTracker") != -1:
binary_name = "antennatracker"
elif step.find("CopterAVC") != -1:
binary_name = "arducopter-heli"
elif step.find("QuadPlane") != -1:
binary_name = "arduplane"
else:
raise(ValueError("Unable to determine binary name for step %s" % (step,)))
if debug:
binary_basedir = "sitl-debug"
else:
binary_basedir = "sitl"
binary = util.reltopdir(os.path.join('build', binary_basedir, 'bin', binary_name))
if not os.path.exists(binary):
if os.path.exists(binary + ".exe"):
binary_path += ".exe"
else:
raise ValueError("Binary (%s) does not exist" % (binary,))
return binary
def get_default_params(atype, binary):
'''get default parameters'''
# use rover simulator so SITL is not starved of input
from pymavlink import mavutil
HOME=mavutil.location(40.071374969556928,-105.22978898137808,1583.702759,246)
if binary.find("plane") != -1 or binary.find("rover") != -1:
frame = "rover"
else:
frame = "+"
home = "%f,%f,%u,%u" % (HOME.lat, HOME.lng, HOME.alt, HOME.heading)
sil = util.start_SIL(binary, wipe=True, model=frame, home=home, speedup=10)
mavproxy = util.start_MAVProxy_SIL(atype)
print("Dumping defaults")
idx = mavproxy.expect(['Please Run Setup', 'Saved [0-9]+ parameters to (\S+)'])
if idx == 0:
# we need to restart it after eeprom erase
util.pexpect_close(mavproxy)
util.pexpect_close(sil)
sil = util.start_SIL(binary, model=frame, home=home, speedup=10)
mavproxy = util.start_MAVProxy_SIL(atype)
idx = mavproxy.expect('Saved [0-9]+ parameters to (\S+)')
parmfile = mavproxy.match.group(1)
dest = util.reltopdir('../buildlogs/%s-defaults.parm' % atype)
shutil.copy(parmfile, dest)
util.pexpect_close(mavproxy)
util.pexpect_close(sil)
print("Saved defaults for %s to %s" % (atype, dest))
return True
def drive_APMrover2(viewerip=None, map=False):
'''drive APMrover2 in SIL
you can pass viewerip as an IP address to optionally send fg and
mavproxy packets too for local viewing of the mission in real time
'''
global homeloc
options = '--sitl=127.0.0.1:5501 --out=127.0.0.1:19550 --streamrate=10'
if viewerip:
options += " --out=%s:14550" % viewerip
if map:
options += ' --map'
home = "%f,%f,%u,%u" % (HOME.lat, HOME.lng, HOME.alt, HOME.heading)
sil = util.start_SIL('APMrover2', wipe=True, model='rover', home=home, speedup=10)
mavproxy = util.start_MAVProxy_SIL('APMrover2', options=options)
print("WAITING FOR PARAMETERS")
mavproxy.expect('Received [0-9]+ parameters')
# setup test parameters
mavproxy.send("param load %s/Rover.parm\n" % testdir)
mavproxy.expect('Loaded [0-9]+ parameters')
# restart with new parms
util.pexpect_close(mavproxy)
util.pexpect_close(sil)
sil = util.start_SIL('APMrover2', model='rover', home=home, speedup=10)
mavproxy = util.start_MAVProxy_SIL('APMrover2', options=options)
mavproxy.expect('Telemetry log: (\S+)')
logfile = mavproxy.match.group(1)
print("LOGFILE %s" % logfile)
buildlog = util.reltopdir("../buildlogs/APMrover2-test.tlog")
print("buildlog=%s" % buildlog)
if os.path.exists(buildlog):
os.unlink(buildlog)
try:
os.link(logfile, buildlog)
except Exception:
pass
mavproxy.expect('Received [0-9]+ parameters')
util.expect_setup_callback(mavproxy, expect_callback)
expect_list_clear()
expect_list_extend([sil, mavproxy])
print("Started simulator")
# get a mavlink connection going
try:
mav = mavutil.mavlink_connection('127.0.0.1:19550', robust_parsing=True)
except Exception, msg:
print("Failed to start mavlink connection on 127.0.0.1:19550" % msg)
raise
def drive_APMrover2(viewerip=None, map=False, valgrind=False):
'''drive APMrover2 in SIL
you can pass viewerip as an IP address to optionally send fg and
mavproxy packets too for local viewing of the mission in real time
'''
global homeloc
options = '--sitl=127.0.0.1:5501 --out=127.0.0.1:19550 --streamrate=10'
if viewerip:
options += " --out=%s:14550" % viewerip
if map:
options += ' --map'
home = "%f,%f,%u,%u" % (HOME.lat, HOME.lng, HOME.alt, HOME.heading)
sil = util.start_SIL('APMrover2', wipe=True, model='rover', home=home, speedup=10)
mavproxy = util.start_MAVProxy_SIL('APMrover2', options=options)
print("WAITING FOR PARAMETERS")
mavproxy.expect('Received [0-9]+ parameters')
# setup test parameters
mavproxy.send("param load %s/Rover.parm\n" % testdir)
mavproxy.expect('Loaded [0-9]+ parameters')
# restart with new parms
util.pexpect_close(mavproxy)
util.pexpect_close(sil)
sil = util.start_SIL('APMrover2', model='rover', home=home, speedup=10, valgrind=valgrind)
mavproxy = util.start_MAVProxy_SIL('APMrover2', options=options)
mavproxy.expect('Telemetry log: (\S+)')
logfile = mavproxy.match.group(1)
print("LOGFILE %s" % logfile)
buildlog = util.reltopdir("../buildlogs/APMrover2-test.tlog")
print("buildlog=%s" % buildlog)
if os.path.exists(buildlog):
os.unlink(buildlog)
try:
os.link(logfile, buildlog)
except Exception:
pass
mavproxy.expect('Received [0-9]+ parameters')
util.expect_setup_callback(mavproxy, expect_callback)
expect_list_clear()
expect_list_extend([sil, mavproxy])
print("Started simulator")
# get a mavlink connection going
try:
mav = mavutil.mavlink_connection('127.0.0.1:19550', robust_parsing=True)
except Exception, msg:
print("Failed to start mavlink connection on 127.0.0.1:19550" % msg)
raise
def run_mission(mission_path, frame, home, viewerip=None):
sim_cmd = util.reltopdir('Tools/autotest/pysim/sim_multicopter.py')
sim_cmd += ' --frame=%s --rate=400 --home=%f,%f,%u,%u' % (
frame, home.lat, home.lng, home.alt, home.heading)
sim_cmd += ' --wind=6,45,.3'
if viewerip:
sim_cmd += ' --fgout=%s:5503' % viewerip
sil = util.start_SIL('ArduCopter', wipe=True)
mavproxy = util.start_MAVProxy_SIL(
'ArduCopter',
options='--sitl=127.0.0.1:5501 --out=127.0.0.1:19550 --quadcopter')
mavproxy.expect('Received [0-9]+ parameters')
# setup test parameters
mavproxy.send('param set SYSID_THISMAV %u\n' % random.randint(100, 200))
mavproxy.send("param load %s/autotest/ArduCopter.parm\n" % testdir)
mavproxy.expect('Loaded [0-9]+ parameters')
mavproxy.send('module load mmap\n')
# reboot with new parameters
util.pexpect_close(mavproxy)
util.pexpect_close(sil)
sil = util.start_SIL('ArduCopter', height=home.alt)
print 'Executing command %s' % (sim_cmd,)
sim = pexpect.spawn(sim_cmd, logfile=sys.stdout, timeout=10)
sim.delaybeforesend = 0
util.pexpect_autoclose(sim)
options = ('--sitl=127.0.0.1:5501 --out=127.0.0.1:19550 --quadcopter '
'--streamrate=5')
if viewerip:
options += ' --out=%s:14550' % viewerip
mavproxy = util.start_MAVProxy_SIL('ArduCopter', options=options)
mavproxy.expect('Logging to (\S+)')
logfile = mavproxy.match.group(1)
print 'Saving log %s' % (logfile,)
# the received parameters can come before or after the ready to fly message
mavproxy.expect(['Received [0-9]+ parameters', 'Ready to FLY'])
mavproxy.expect(['Received [0-9]+ parameters', 'Ready to FLY'])
mavproxy.send('module load mmap\n')
util.expect_setup_callback(mavproxy, common.expect_callback)
common.expect_list_clear()
common.expect_list_extend([sim, sil, mavproxy])
# get a mavlink connection going
try:
mav = mavutil.mavlink_connection('127.0.0.1:19550', robust_parsing=True)
except Exception, msg:
error("Failed to start mavlink connection on 127.0.0.1:19550" % msg)
raise
def fly_QuadPlane(binary, viewerip=None, map=False, valgrind=False, gdb=False):
'''fly QuadPlane in SIL
you can pass viewerip as an IP address to optionally send fg and
mavproxy packets too for local viewing of the flight in real time
'''
global homeloc
options = '--sitl=127.0.0.1:5501 --out=127.0.0.1:19550 --streamrate=10'
if viewerip:
options += " --out=%s:14550" % viewerip
if map:
options += ' --map'
sil = util.start_SIL(binary,
model='quadplane',
wipe=True,
home=HOME_LOCATION,
speedup=10,
defaults_file=os.path.join(
testdir, 'default_params/quadplane.parm'),
valgrind=valgrind,
gdb=gdb)
mavproxy = util.start_MAVProxy_SIL('QuadPlane', options=options)
mavproxy.expect('Telemetry log: (\S+)')
logfile = mavproxy.match.group(1)
print("LOGFILE %s" % logfile)
buildlog = util.reltopdir("../buildlogs/QuadPlane-test.tlog")
print("buildlog=%s" % buildlog)
if os.path.exists(buildlog):
os.unlink(buildlog)
try:
os.link(logfile, buildlog)
except Exception:
pass
util.expect_setup_callback(mavproxy, expect_callback)
mavproxy.expect('Received [0-9]+ parameters')
expect_list_clear()
expect_list_extend([sil, mavproxy])
print("Started simulator")
# get a mavlink connection going
try:
mav = mavutil.mavlink_connection('127.0.0.1:19550',
robust_parsing=True)
except Exception, msg:
print("Failed to start mavlink connection on 127.0.0.1:19550" % msg)
raise
def check_logs(step):
'''check for log files from a step'''
print("check step: ", step)
if step.startswith('fly.'):
vehicle = step[4:]
elif step.startswith('drive.'):
vehicle = step[6:]
else:
return
logs = glob.glob("logs/*.BIN")
for log in logs:
bname = os.path.basename(log)
newname = util.reltopdir("../buildlogs/%s-%s" % (vehicle, bname))
print("Renaming %s to %s" % (log, newname))
os.rename(log, newname)
corefile = "core"
if os.path.exists(corefile):
newname = util.reltopdir("../buildlogs/%s.core" % vehicle)
print("Renaming %s to %s" % (corefile, newname))
os.rename(corefile, newname)
util.run_cmd('/bin/cp A*/A*.elf ../buildlogs', dir=util.reltopdir('.'))
def check_logs(step):
'''check for log files from a step'''
print("check step: ", step)
if step.startswith('fly.'):
vehicle = step[4:]
elif step.startswith('drive.'):
vehicle = step[6:]
else:
return
logs = glob.glob("logs/*.BIN")
for log in logs:
bname = os.path.basename(log)
newname = util.reltopdir("../buildlogs/%s-%s" % (vehicle, bname))
print("Renaming %s to %s" % (log, newname))
os.rename(log, newname)
corefile = "core"
if os.path.exists(corefile):
newname = util.reltopdir("../buildlogs/%s.core" % vehicle)
print("Renaming %s to %s" % (corefile, newname))
os.rename(corefile, newname)
util.run_cmd('/bin/cp A*/A*.elf ../buildlogs', dir=util.reltopdir('.'))
def fly_ArduPlane(binary, viewerip=None, map=False, valgrind=False, gdb=False):
'''fly ArduPlane in SIL
you can pass viewerip as an IP address to optionally send fg and
mavproxy packets too for local viewing of the flight in real time
'''
global homeloc
options = '--sitl=127.0.0.1:5501 --out=127.0.0.1:19550 --streamrate=10'
if viewerip:
options += " --out=%s:14550" % viewerip
if map:
options += ' --map'
sil = util.start_SIL(binary, model='plane-elevrev', home=HOME_LOCATION, speedup=10,
valgrind=valgrind, gdb=gdb,
defaults_file=os.path.join(testdir, 'default_params/ArduPlane.parm'))
mavproxy = util.start_MAVProxy_SIL('ArduPlane', options=options)
mavproxy.expect('Telemetry log: (\S+)')
logfile = mavproxy.match.group(1)
print("LOGFILE %s" % logfile)
buildlog = util.reltopdir("../buildlogs/ArduPlane-test.tlog")
print("buildlog=%s" % buildlog)
if os.path.exists(buildlog):
os.unlink(buildlog)
try:
os.link(logfile, buildlog)
except Exception:
pass
util.expect_setup_callback(mavproxy, expect_callback)
mavproxy.expect('Received [0-9]+ parameters')
expect_list_clear()
expect_list_extend([sil, mavproxy])
print("Started simulator")
# get a mavlink connection going
try:
mav = mavutil.mavlink_connection('127.0.0.1:19550', robust_parsing=True)
except Exception, msg:
print("Failed to start mavlink connection on 127.0.0.1:19550" % msg)
raise
def get_default_params(atype):
'''get default parameters'''
sil = util.start_SIL(atype, wipe=True)
mavproxy = util.start_MAVProxy_SIL(atype)
print("Dumping defaults")
idx = mavproxy.expect(['Please Run Setup', 'Saved [0-9]+ parameters to (\S+)'])
if idx == 0:
# we need to restart it after eeprom erase
util.pexpect_close(mavproxy)
util.pexpect_close(sil)
sil = util.start_SIL(atype)
mavproxy = util.start_MAVProxy_SIL(atype)
idx = mavproxy.expect('Saved [0-9]+ parameters to (\S+)')
parmfile = mavproxy.match.group(1)
dest = util.reltopdir('../buildlogs/%s.defaults.txt' % atype)
shutil.copy(parmfile, dest)
util.pexpect_close(mavproxy)
util.pexpect_close(sil)
print("Saved defaults for %s to %s" % (atype, dest))
return True
def get_default_params(atype):
'''get default parameters'''
sil = util.start_SIL(atype, wipe=True)
mavproxy = util.start_MAVProxy_SIL(atype)
print("Dumping defaults")
idx = mavproxy.expect(['Please Run Setup', 'Saved [0-9]+ parameters to (\S+)'])
if idx == 0:
# we need to restart it after eeprom erase
util.pexpect_close(mavproxy)
util.pexpect_close(sil)
sil = util.start_SIL(atype)
mavproxy = util.start_MAVProxy_SIL(atype)
idx = mavproxy.expect('Saved [0-9]+ parameters to (\S+)')
parmfile = mavproxy.match.group(1)
dest = util.reltopdir('../buildlogs/%s.defaults.txt' % atype)
shutil.copy(parmfile, dest)
util.pexpect_close(mavproxy)
util.pexpect_close(sil)
print("Saved defaults for %s to %s" % (atype, dest))
return True
def get_default_params(atype):
'''get default parameters'''
# use rover simulator so SITL is not starved of input
from pymavlink import mavutil
HOME = mavutil.location(40.071374969556928, -105.22978898137808,
1583.702759, 246)
sim_cmd = util.reltopdir(
'Tools/autotest/pysim/sim_rover.py'
) + ' --rate=200 --speedup=100 --home=%f,%f,%u,%u' % (
HOME.lat, HOME.lng, HOME.alt, HOME.heading)
runsim = pexpect.spawn(sim_cmd, logfile=sys.stdout, timeout=10)
runsim.delaybeforesend = 0
runsim.expect('Starting at lat')
sil = util.start_SIL(atype, wipe=True)
mavproxy = util.start_MAVProxy_SIL(atype)
print("Dumping defaults")
idx = mavproxy.expect(
['Please Run Setup', 'Saved [0-9]+ parameters to (\S+)'])
if idx == 0:
# we need to restart it after eeprom erase
util.pexpect_close(mavproxy)
util.pexpect_close(sil)
sil = util.start_SIL(atype)
mavproxy = util.start_MAVProxy_SIL(atype)
idx = mavproxy.expect('Saved [0-9]+ parameters to (\S+)')
parmfile = mavproxy.match.group(1)
dest = 'buildlogs/%s-defaults.parm' % atype
shutil.copy(parmfile, dest)
util.pexpect_close(mavproxy)
util.pexpect_close(sil)
util.pexpect_close(runsim)
print("Saved defaults for %s to %s" % (atype, dest))
return True
failed = True
if not fly_LOITER(mavproxy, mav):
print("Failed LOITER")
failed = True
if not fly_CIRCLE(mavproxy, mav):
print("Failed CIRCLE")
failed = True
if not fly_mission(mavproxy,
mav,
os.path.join(testdir, "ap1.txt"),
height_accuracy=10,
target_altitude=homeloc.alt + 100):
print("Failed mission")
failed = True
if not log_download(mavproxy, mav,
util.reltopdir("../buildlogs/ArduPlane-log.bin")):
print("Failed log download")
failed = True
except pexpect.TIMEOUT, e:
print("Failed with timeout")
failed = True
mav.close()
util.pexpect_close(mavproxy)
util.pexpect_close(sil)
util.pexpect_close(runsim)
if os.path.exists('ArduPlane-valgrind.log'):
os.chmod('ArduPlane-valgrind.log', 0644)
shutil.copy("ArduPlane-valgrind.log",
util.reltopdir("../buildlogs/ArduPlane-valgrind.log"))
def fly_ArduCopter(viewerip=None, map=False):
'''fly ArduCopter in SIL
you can pass viewerip as an IP address to optionally send fg and
mavproxy packets too for local viewing of the flight in real time
'''
global homeloc
if TARGET != 'sitl':
util.build_SIL('ArduCopter', target=TARGET)
home = "%f,%f,%u,%u" % (HOME.lat, HOME.lng, HOME.alt, HOME.heading)
sil = util.start_SIL('ArduCopter', wipe=True, model='+', home=home, speedup=speedup_default)
mavproxy = util.start_MAVProxy_SIL('ArduCopter', options='--sitl=127.0.0.1:5501 --out=127.0.0.1:19550 --quadcopter')
mavproxy.expect('Received [0-9]+ parameters')
# setup test parameters
mavproxy.send("param load %s/copter_params.parm\n" % testdir)
mavproxy.expect('Loaded [0-9]+ parameters')
# reboot with new parameters
util.pexpect_close(mavproxy)
util.pexpect_close(sil)
sil = util.start_SIL('ArduCopter', model='+', home=home, speedup=speedup_default)
options = '--sitl=127.0.0.1:5501 --out=127.0.0.1:19550 --quadcopter --streamrate=5'
if viewerip:
options += ' --out=%s:14550' % viewerip
if map:
options += ' --map'
mavproxy = util.start_MAVProxy_SIL('ArduCopter', options=options)
mavproxy.expect('Telemetry log: (\S+)')
logfile = mavproxy.match.group(1)
print("LOGFILE %s" % logfile)
buildlog = util.reltopdir("../buildlogs/ArduCopter-test.tlog")
print("buildlog=%s" % buildlog)
copyTLog = False
if os.path.exists(buildlog):
os.unlink(buildlog)
try:
os.link(logfile, buildlog)
except Exception:
print( "WARN: Failed to create symlink: " + logfile + " => " + buildlog + ", Will copy tlog manually to target location" )
copyTLog = True
# the received parameters can come before or after the ready to fly message
mavproxy.expect(['Received [0-9]+ parameters', 'Ready to FLY'])
mavproxy.expect(['Received [0-9]+ parameters', 'Ready to FLY'])
util.expect_setup_callback(mavproxy, expect_callback)
expect_list_clear()
expect_list_extend([sil, mavproxy])
# get a mavlink connection going
try:
mav = mavutil.mavlink_connection('127.0.0.1:19550', robust_parsing=True)
except Exception, msg:
print("Failed to start mavlink connection on 127.0.0.1:19550" % msg)
raise
def setup_class(cls):
#Set this to False to enable logging.
DEBUG = False
CONSOLE = False
cls.TIMEOUT = 5
cls.DELAY = 2
cls.resource_path = os.path.join(
os.path.join(os.path.dirname(os.path.abspath(__file__)),
'TestGroupLib/'), 'Resources/')
#start MAVLink, etc
try:
os.remove('eeprom.bin')
except OSError:
pass
try:
os.remove('jsb_pipe')
os.remove('mavproxy_pipe')
except Exception:
pass
util.run_cmd('mkfifo mavproxy_pipe')
util.run_cmd('mkfifo jsb_pipe')
if DEBUG:
util.run_cmd('xterm -e tail -f jsb_pipe &')
util.run_cmd('xterm -e tail -f mavproxy_pipe &')
util.run_cmd('echo "INITIALIZED MAVPROXY PIPE" > mavproxy_pipe &')
util.run_cmd('echo "INITIALIZED JSBSIM PIPE" > jsb_pipe &')
cls.homeloc = None
HOME_LOCATION = '35.7168007,-120.7644466,275,295' #McMillan Lat/Lon/Alt/Heading
WIND = "0,180,0.0" # speed,direction,variance
options = '--sitl=127.0.0.1:5501 --out=127.0.0.1:19550 --streamrate=100 '
#Start SITL
cls.sil = util.start_SIL('ArduPlane', wipe=True)
cls.mavproxy = util.start_MAVProxy_SIL('ArduPlane', options=options)
cls.mavproxy.expect('Received [0-9]+ parameters')
#Load SITL params
cls.mavproxy.send("param load %ssitl.parm\n" % cls.resource_path)
cls.mavproxy.expect('Loaded [0-9]+ parameters')
#Fetch list of params
cls.mavproxy.send("param fetch\n")
#TODO: Optimize this. Is it necessary to start and close it?
util.pexpect_close(cls.mavproxy)
util.pexpect_close(cls.sil)
#Start JSBSim simulation
cmd = util.reltopdir("Tools/autotest/jsbsim/runsim.py")
cmd += " --home=%s --wind=%s" % (HOME_LOCATION, WIND)
#cls.runsim = pexpect.spawn(cmd, logfile=sys.stdout, timeout=10)
cls.runsim = pexpect.spawn(cmd,
logfile=file('jsb_pipe', 'w+', 0),
timeout=10)
cls.runsim.delaybeforesend = 0
util.pexpect_autoclose(cls.runsim)
cls.runsim.expect('Simulator ready to fly.')
cls.sil = util.start_SIL('ArduPlane', valgrind=True)
options += ' --map'
if CONSOLE:
options += ' --console'
cls.mavproxy = util.start_MAVProxy_SIL('ArduPlane',
logfile=file(
'mavproxy_pipe', 'w+', 0),
options=options)
#TODO: Make these easier to find
cls.mavproxy.expect('Logging to (\S+)')
logfile = cls.mavproxy.match.group(1)
print("LOGFILE %s" % logfile)
#TODO: Make these easier to find
buildlog = util.reltopdir("../buildlogs/ArduPlane-test.tlog")
print("buildlog=%s" % buildlog)
if os.path.exists(buildlog):
os.unlink(buildlog)
try:
os.link(logfile, buildlog)
except Exception:
pass
cls.mavproxy.expect('Received [0-9]+ parameters')
util.expect_setup_callback(cls.mavproxy, expect_callback)
expect_list_clear()
expect_list_extend([cls.runsim, cls.sil, cls.mavproxy])
print("Started simulator.")
#Get a mavlink connection started.
try:
cls.mav = mavutil.mavlink_connection('127.0.0.1:19550',
robust_parsing=True)
except Exception, msg:
print("Failed to start mavlink connection on 127.0.0.1:19550" %
msg)
raise
print("########## Test RTL ##########")
print("#")
if not fly_RTL(mavproxy, mav):
failed_test_msg = "fly_RTL failed"
print(failed_test_msg)
failed = True
print("# Fly copter mission")
if not fly_auto_test(mavproxy, mav):
failed_test_msg = "fly_auto_test failed"
print(failed_test_msg)
failed = True
else:
print("Flew copter mission OK")
if not log_download(mavproxy, mav, util.reltopdir("../buildlogs/ArduCopter-log.bin")):
failed_test_msg = "log_download failed"
print(failed_test_msg)
failed = True
except pexpect.TIMEOUT, failed_test_msg:
failed_test_msg = "Timeout"
failed = True
mav.close()
util.pexpect_close(mavproxy)
util.pexpect_close(sil)
util.pexpect_close(sim)
if os.path.exists('ArduCopter-valgrind.log'):
os.chmod('ArduCopter-valgrind.log', 0644)
#!/usr/bin/env python
# APM automatic test suite
# Andrew Tridgell, October 2011
import pexpect, os, sys, shutil, atexit
import optparse, fnmatch, time, glob, traceback, signal
sys.path.insert(0, os.path.join(os.path.dirname(os.path.realpath(__file__)), 'pysim'))
import util
os.environ['PYTHONUNBUFFERED'] = '1'
os.putenv('TMPDIR', util.reltopdir('tmp'))
def get_default_params(atype, binary):
'''get default parameters'''
# use rover simulator so SITL is not starved of input
from pymavlink import mavutil
HOME=mavutil.location(40.071374969556928,-105.22978898137808,1583.702759,246)
if binary.find("plane") != -1 or binary.find("rover") != -1:
frame = "rover"
else:
frame = "+"
home = "%f,%f,%u,%u" % (HOME.lat, HOME.lng, HOME.alt, HOME.heading)
sil = util.start_SIL(binary, wipe=True, model=frame, home=home, speedup=10)
mavproxy = util.start_MAVProxy_SIL(atype)
print("Dumping defaults")
idx = mavproxy.expect(['Please Run Setup', 'Saved [0-9]+ parameters to (\S+)'])
def test_prerequisites():
'''check we have the right directories and tools to run tests'''
print("Testing prerequisites")
util.mkdir_p(util.reltopdir('../buildlogs'))
return True
def fly_CopterAVC(viewerip=None, map=False):
'''fly ArduCopter in SIL for AVC2013 mission
'''
global homeloc
if TARGET != 'sitl':
util.build_SIL('ArduCopter', target=TARGET)
sim_cmd = util.reltopdir('Tools/autotest/pysim/sim_multicopter.py') + ' --frame=%s --rate=400 --home=%f,%f,%u,%u' % (
FRAME, AVCHOME.lat, AVCHOME.lng, AVCHOME.alt, AVCHOME.heading)
if viewerip:
sim_cmd += ' --fgout=%s:5503' % viewerip
sil = util.start_SIL('ArduCopter', wipe=True)
mavproxy = util.start_MAVProxy_SIL('ArduCopter', options='--sitl=127.0.0.1:5501 --out=127.0.0.1:19550 --quadcopter')
mavproxy.expect('Received [0-9]+ parameters')
# setup test parameters
mavproxy.send("param load %s/copter_AVC2013_params.parm\n" % testdir)
mavproxy.expect('Loaded [0-9]+ parameters')
# reboot with new parameters
util.pexpect_close(mavproxy)
util.pexpect_close(sil)
sil = util.start_SIL('ArduCopter', height=HOME.alt)
sim = pexpect.spawn(sim_cmd, logfile=sys.stdout, timeout=10)
sim.delaybeforesend = 0
util.pexpect_autoclose(sim)
options = '--sitl=127.0.0.1:5501 --out=127.0.0.1:19550 --quadcopter --streamrate=5'
if viewerip:
options += ' --out=%s:14550' % viewerip
if map:
options += ' --map'
mavproxy = util.start_MAVProxy_SIL('ArduCopter', options=options)
mavproxy.expect('Logging to (\S+)')
logfile = mavproxy.match.group(1)
print("LOGFILE %s" % logfile)
buildlog = util.reltopdir("../buildlogs/CopterAVC-test.tlog")
print("buildlog=%s" % buildlog)
if os.path.exists(buildlog):
os.unlink(buildlog)
try:
os.link(logfile, buildlog)
except Exception:
pass
# the received parameters can come before or after the ready to fly message
mavproxy.expect(['Received [0-9]+ parameters', 'Ready to FLY'])
mavproxy.expect(['Received [0-9]+ parameters', 'Ready to FLY'])
util.expect_setup_callback(mavproxy, expect_callback)
expect_list_clear()
expect_list_extend([sim, sil, mavproxy])
if map:
mavproxy.send('map icon 40.072467969730496 -105.2314389590174\n')
mavproxy.send('map icon 40.072600990533829 -105.23146100342274\n')
# get a mavlink connection going
try:
mav = mavutil.mavlink_connection('127.0.0.1:19550', robust_parsing=True)
except Exception, msg:
print("Failed to start mavlink connection on 127.0.0.1:19550" % msg)
raise
failed = True
else:
print("Flew mission2 OK")
print("# Land")
if not land(mavproxy, mav):
print("land failed")
failed = True
#print("# disarm motors")
#if not disarm_motors(mavproxy, mav):
# print("disarm_motors failed")
# failed = True
except pexpect.TIMEOUT, e:
failed = True
mav.close()
util.pexpect_close(mavproxy)
util.pexpect_close(sil)
util.pexpect_close(sim)
if os.path.exists('ArduCopter-valgrind.log'):
os.chmod('ArduCopter-valgrind.log', 0644)
shutil.copy("ArduCopter-valgrind.log",
util.reltopdir("../buildlogs/ArduCopter-valgrind.log"))
if failed:
print("FAILED: %s" % e)
return False
return True
def fly_ArduCopter(viewerip=None):
'''fly ArduCopter in SIL
you can pass viewerip as an IP address to optionally send fg and
mavproxy packets too for local viewing of the flight in real time
'''
global homeloc
if TARGET != 'sitl':
util.build_SIL('ArduCopter', target=TARGET)
sim_cmd = util.reltopdir(
'Tools/autotest/pysim/sim_multicopter.py'
) + ' --frame=%s --rate=400 --home=%f,%f,%u,%u' % (
FRAME, HOME.lat, HOME.lng, HOME.alt, HOME.heading)
sim_cmd += ' --wind=6,45,.3'
if viewerip:
sim_cmd += ' --fgout=%s:5503' % viewerip
sil = util.start_SIL('ArduCopter', wipe=True)
mavproxy = util.start_MAVProxy_SIL(
'ArduCopter',
options='--sitl=127.0.0.1:5501 --out=127.0.0.1:19550 --quadcopter')
mavproxy.expect('Received [0-9]+ parameters')
# setup test parameters
mavproxy.send('param set SYSID_THISMAV %u\n' % random.randint(100, 200))
mavproxy.send("param load %s/ArduCopter.parm\n" % testdir)
mavproxy.expect('Loaded [0-9]+ parameters')
# reboot with new parameters
util.pexpect_close(mavproxy)
util.pexpect_close(sil)
sil = util.start_SIL('ArduCopter', height=HOME.alt)
sim = pexpect.spawn(sim_cmd, logfile=sys.stdout, timeout=10)
sim.delaybeforesend = 0
util.pexpect_autoclose(sim)
options = '--sitl=127.0.0.1:5501 --out=127.0.0.1:19550 --quadcopter --streamrate=5'
if viewerip:
options += ' --out=%s:14550' % viewerip
mavproxy = util.start_MAVProxy_SIL('ArduCopter', options=options)
mavproxy.expect('Logging to (\S+)')
logfile = mavproxy.match.group(1)
print("LOGFILE %s" % logfile)
buildlog = util.reltopdir("../buildlogs/ArduCopter-test.mavlog")
print("buildlog=%s" % buildlog)
if os.path.exists(buildlog):
os.unlink(buildlog)
os.link(logfile, buildlog)
# the received parameters can come before or after the ready to fly message
mavproxy.expect(['Received [0-9]+ parameters', 'Ready to FLY'])
mavproxy.expect(['Received [0-9]+ parameters', 'Ready to FLY'])
util.expect_setup_callback(mavproxy, expect_callback)
expect_list_clear()
expect_list_extend([sim, sil, mavproxy])
# get a mavlink connection going
try:
mav = mavutil.mavlink_connection('127.0.0.1:19550',
robust_parsing=True)
except Exception, msg:
print("Failed to start mavlink connection on 127.0.0.1:19550" % msg)
raise
def fly_ArduPlane(viewerip=None, map=False):
'''fly ArduPlane in SIL
you can pass viewerip as an IP address to optionally send fg and
mavproxy packets too for local viewing of the flight in real time
'''
global homeloc
options = '--sitl=127.0.0.1:5501 --out=127.0.0.1:19550 --streamrate=10'
if viewerip:
options += " --out=%s:14550" % viewerip
if map:
options += ' --map'
sil = util.start_SIL('ArduPlane', wipe=True)
mavproxy = util.start_MAVProxy_SIL('ArduPlane', options=options)
mavproxy.expect('Received [0-9]+ parameters')
# setup test parameters
mavproxy.send("param load %s/ArduPlane.parm\n" % testdir)
mavproxy.expect('Loaded [0-9]+ parameters')
mavproxy.send("param fetch\n")
# restart with new parms
util.pexpect_close(mavproxy)
util.pexpect_close(sil)
cmd = util.reltopdir("Tools/autotest/jsbsim/runsim.py")
cmd += " --home=%s --wind=%s" % (HOME_LOCATION, WIND)
if viewerip:
cmd += " --fgout=%s:5503" % viewerip
runsim = pexpect.spawn(cmd, logfile=sys.stdout, timeout=10)
runsim.delaybeforesend = 0
util.pexpect_autoclose(runsim)
runsim.expect('Simulator ready to fly')
sil = util.start_SIL('ArduPlane')
mavproxy = util.start_MAVProxy_SIL('ArduPlane', options=options)
mavproxy.expect('Logging to (\S+)')
logfile = mavproxy.match.group(1)
print("LOGFILE %s" % logfile)
buildlog = util.reltopdir("../buildlogs/ArduPlane-test.tlog")
print("buildlog=%s" % buildlog)
if os.path.exists(buildlog):
os.unlink(buildlog)
try:
os.link(logfile, buildlog)
except Exception:
pass
mavproxy.expect('Received [0-9]+ parameters')
util.expect_setup_callback(mavproxy, expect_callback)
expect_list_clear()
expect_list_extend([runsim, sil, mavproxy])
print("Started simulator")
# get a mavlink connection going
try:
mav = mavutil.mavlink_connection('127.0.0.1:19550',
robust_parsing=True)
except Exception, msg:
print("Failed to start mavlink connection on 127.0.0.1:19550" % msg)
raise
def addglobimage(self, name, pattern):
'''add a set of images'''
import glob
for f in glob.glob(util.reltopdir('../buildlogs/%s' % pattern)):
self.addimage(name, os.path.basename(f))
parser.add_option("--elevon", action='store_true', default=False, help='assume elevon input')
parser.add_option("--revthr", action='store_true', default=False, help='reverse throttle')
parser.add_option("--vtail", action='store_true', default=False, help='assume vtail input')
parser.add_option("--wind", dest="wind", help="Simulate wind (speed,direction,turbulance)", default='0,0,0')
parser.add_option("--rate", type='int', help="Simulation rate (Hz)", default=1000)
parser.add_option("--speedup", type='float', default=1.0, help="speedup from realtime")
(opts, args) = parser.parse_args()
for m in [ 'home', 'script' ]:
if not opts.__dict__[m]:
print("Missing required option '%s'" % m)
parser.print_help()
sys.exit(1)
os.chdir(util.reltopdir('Tools/autotest'))
# kill off child when we exit
atexit.register(util.pexpect_close_all)
setup_template(opts.home)
# start child
cmd = "JSBSim --realtime --suspend --nice --simulation-rate=%u --logdirectivefile=jsb_sim/fgout.xml --script=%s" % (opts.rate, opts.script)
if opts.options:
cmd += ' %s' % opts.options
jsb = pexpect.spawn(cmd, logfile=sys.stdout, timeout=10)
jsb.delaybeforesend = 0
util.pexpect_autoclose(jsb)
i = jsb.expect(["Successfully bound to socket for input on port (\d+)",
try:
print("Waiting for a heartbeat with mavlink protocol %s" % mav.WIRE_PROTOCOL_VERSION)
mav.wait_heartbeat()
print("Setting up RC parameters")
setup_rc(mavproxy)
print("Waiting for GPS fix")
mav.wait_gps_fix()
homeloc = mav.location()
print("Home location: %s" % homeloc)
if not arm_rover(mavproxy, mav):
print("Failed to ARM")
failed = True
if not drive_mission(mavproxy, mav, os.path.join(testdir, "rover1.txt")):
print("Failed mission")
failed = True
if not log_download(mavproxy, mav, util.reltopdir("../buildlogs/APMrover2-log.bin")):
print("Failed log download")
failed = True
# if not drive_left_circuit(mavproxy, mav):
# print("Failed left circuit")
# failed = True
# if not drive_RTL(mavproxy, mav):
# print("Failed RTL")
# failed = True
except pexpect.TIMEOUT, e:
print("Failed with timeout")
failed = True
mav.close()
util.pexpect_close(mavproxy)
util.pexpect_close(sil)
