class SimpleBlockMeshGenerator:
def __init__(self,
mesh_config: SimpleBlockMeshConfig,
fragmentation_config: FragmentationConfig,
execution_config: ExecutionConfig = ExecutionConfig()):
self.mesh_config = mesh_config
self.fragmentation_config = fragmentation_config
self.exec_config = execution_config
self.out_file = "system/blockMeshDict"
if self.exec_config is not None:
self.out_file = os.path.join(execution_config.execution_folder,
self.out_file)
self._profiler = Profiler(enable_profiler)
def __del__(self):
self._profiler.print_report()
def create(self, custom_out_file=None):
_logger.info("\n\n===== Run geometry generating")
self._profiler.start("Geometry creating")
self._print_configuration()
self._calculate_points()
self._calculate_fragmentation()
self._calculate_boundary()
text = self._format_text()
file_to_write = self.out_file
if custom_out_file != 0 and (custom_out_file
is not None) and (len(custom_out_file)):
file_to_write = custom_out_file
if custom_out_file == 0:
file_to_write = 0
self.save_geometry(text, file_to_write)
self._profiler.stop("Geometry creating")
_logger.info("===== End geometry generating\n\n")
def generate(self):
_logger.info("\n\n===== Run block mesh generating")
self._profiler.start("Mesh generating")
self.generate_mesh()
self._profiler.stop("Mesh generating")
# Just because there a lots of logs from blockMesh command
_logger.info("===== End block mesh generating\n\n")
def _print_configuration(self):
_logger.log(LogLvl.LOG_INFO, "Generate mesh with size:")
_logger.log(
LogLvl.LOG_INFO,
"width_mm: {}\theight_mm: {}\tlength_mm: {}".format(
self.mesh_config.width_mm, self.mesh_config.height_mm,
self.mesh_config.length_mm))
_logger.log(LogLvl.LOG_INFO, "Generate mesh with fragmentation:")
_logger.log(
LogLvl.LOG_INFO, "{:>25}{:>25}{:>25}\n".format(
"width_fragmentation: " + str(self.fragmentation_config.width),
"height_fragmentation: " +
str(self.fragmentation_config.height),
"length_fragmentation: " +
str(self.fragmentation_config.length)))
def _calculate_points(self):
# TODO add check, that convertToMeters is 0.001 (m to mm)
width_mm = self.mesh_config.width_mm
height_mm = self.mesh_config.height_mm
length_mm = self.mesh_config.length_mm
p1 = [0, 0, 0]
p2 = [width_mm, 0, 0]
p3 = [width_mm, height_mm, 0]
p4 = [0, height_mm, 0]
p5 = [0, 0, length_mm]
p6 = [width_mm, 0, length_mm]
p7 = [width_mm, height_mm, length_mm]
p8 = [0, height_mm, length_mm]
arr = [p1, p2, p3, p4, p5, p6, p7, p8]
self.points = ""
for i in range(len(arr)):
self.points += " ({} {} {})".format(arr[i][0], arr[i][1],
arr[i][2])
if i + 1 != len(arr):
self.points += "\n"
def _calculate_fragmentation(self):
mesh_elem_size_mm = self.fragmentation_config.elem_size_mm
assert (self.mesh_config.width_mm >= mesh_elem_size_mm)
assert (self.mesh_config.height_mm >= mesh_elem_size_mm)
assert (self.mesh_config.length_mm >= mesh_elem_size_mm)
# TODO enable dynamic fragmentation
# length_fragmentation = int(float(length_mm) / mesh_elem_size_mm)
# height_fragmentation = int(float(height_mm) / mesh_elem_size_mm)
# width_fragmentation = int(float(width_mm) / mesh_elem_size_mm)
# TODO try to use 6 2 1 (default in tutorial)
# x - width, y - height, z - length
self.fragmentation = " hex (0 1 2 3 4 5 6 7) ({} {} {}) simpleGrading (1.0 1.0 1.0)".format(
self.fragmentation_config.width, self.fragmentation_config.height,
self.fragmentation_config.length)
def _calculate_boundary(self):
_logger.error("Not implemented")
def _format_text(self):
t = Template(MESH_FILE_TEMPLATE)
boundary = """ topSurface
{
type patch;
faces
(
(2 3 7 6)
);
}
bottomSurface
{
type patch;
faces
(
(0 1 5 4)
);
}
rearFixedEnd
{
type patch;
faces
(
(4 5 6 7)
);
}
frontTractionEnd
{
type patch;
faces
(
(0 1 2 3)
);
}
leftSurface
{
type patch;
faces
(
(0 3 7 4)
);
}
rightSurface
{
type patch;
faces
(
(1 2 6 5)
);
}"""
return t.substitute(points=self.points,
fragmentation=self.fragmentation,
boundary=boundary)
@staticmethod
def save_geometry(text, filename):
if filename != 0:
_logger.debug("Save file to: {}".format(filename))
f = open(filename, "w+")
f.writelines(text)
f.close()
else:
print(text)
def generate_mesh(self):
# FIXME temporary solution
# FIXME Not check that is not None
openfoam_folder = "OPENFOAM FOLDER NOT SPECIFIED"
if self.exec_config is not None:
if self.exec_config.openfoam_folder is not None:
openfoam_folder = self.exec_config.openfoam_folder
env_script = "ENV SCRIPT NOT SPECIFIED"
if self.exec_config is not None:
if self.exec_config.prepare_env_script is not None:
env_script = self.exec_config.prepare_env_script
# Make sure script have commented lines, where FOAM_INST_DIR is set
prepare_call = "export FOAM_INST_DIR=" + openfoam_folder
prepare_call += "; "
prepare_call += ". " + env_script
prepare_call += "; "
prepare_call += "cd " + self.exec_config.execution_folder
try:
command = "{}; {}".format(prepare_call, "blockMesh")
_logger.info(command)
if _logger.log_lvl == LogLvl.LOG_DEBUG or print_mesh_stats:
subprocess.call("{}".format(command), shell=True)
else:
subprocess.call("{} > /dev/null".format(command), shell=True)
except OSError:
raise OSError(
"blockMesh not found. Please check that you have prepared OpenFOAM environment"
)
class Executor:
# openfoam_solver = "solidEquilibriumDisplacementFoamMod"
openfoam_solver = "solidDisplacementFoamMod"
def __init__(self, exec_conf: ExecutionConfig, mesh_conf, fragmentation_conf: FragmentationConfig):
self._profiler = Profiler(enable_profiler)
_logger.info("Solver: {}".format(self.openfoam_solver))
self.exec_config = exec_conf
self.result_dir = exec_conf.output_dir
files.create_directory(self.result_dir)
self.results = {}
result_file_geom_prefix = None
if type(mesh_conf) is SimpleBlockMeshConfig:
result_file_geom_prefix = "gw{}_gh{}_gl{}".format(
mesh_conf.width_mm,
mesh_conf.height_mm,
mesh_conf.length_mm)
self.geom_values = "{}\t{}\t{}".format(
mesh_conf.width_mm,
mesh_conf.height_mm,
mesh_conf.length_mm)
self.geom_titles = "Geometry width\tGeometry height\tGeometry length"
else:
result_file_geom_prefix = ""
self.geom_values = ""
self.geom_titles = ""
for line_idx in range(len(mesh_conf.width_lines)):
result_file_geom_prefix += "w{}={}_".format(line_idx, mesh_conf.width_lines[line_idx])
self.geom_titles += "{} {}\t".format("Width line", line_idx)
self.geom_values += "{}\t".format(mesh_conf.width_lines[line_idx])
for line_idx in range(len(mesh_conf.height_distance)):
result_file_geom_prefix += "h{}={}_".format(line_idx, mesh_conf.height_distance[line_idx])
self.geom_titles += "{} {}\t".format("Height line", line_idx)
self.geom_values += "{}\t".format(mesh_conf.height_distance[line_idx])
result_file_geom_prefix += "l={}".format(mesh_conf.length)
self.geom_titles += "{}".format("Length")
self.geom_values += "{}".format(mesh_conf.length)
_logger.debug(result_file_geom_prefix)
_logger.debug(self.geom_values)
fragmentation_options_line = "fw{}_fh{}_fl{}".format(
fragmentation_conf.width,
fragmentation_conf.height,
fragmentation_conf.length)
self.fragmentation_values = "{}\t{}\t{}".format(
fragmentation_conf.width,
fragmentation_conf.height,
fragmentation_conf.length)
result_file_name = "result_{}_{}.txt".format(result_file_geom_prefix, fragmentation_options_line)
self.result_file = os.path.join(self.result_dir, result_file_name)
self.parsed_name = datetime.datetime.now().strftime("%Y-%m-%d-%H.txt")
def __del__(self):
self._profiler.print_report()
def run(self):
_logger.info("\n\n===== Run calculation")
self.__run_execution()
_logger.info("===== End calculation\n\n")
_logger.info("\n\n===== Run result parsing")
self._profiler.start("Parse results")
self.__parse_output_from_file("sigmaEq")
self.__parse_output_from_file("D")
self.__parse_output_from_file("Time")
self._profiler.stop("Parse results")
_logger.info("===== End result parsing\n\n")
def __run_execution(self):
self._profiler.start("Run solver")
# FIXME no check if none
prepare_call = "export FOAM_INST_DIR=" + self.exec_config.openfoam_folder
prepare_call += "; "
prepare_call += ". " + "$HOME/prog/OpenFOAM/OpenFOAM-dev/etc/bashrc_modified"
prepare_call += "; "
prepare_call += "cd " + self.exec_config.execution_folder
try:
subprocess.call(["{}; {} > {}".format(prepare_call, self.openfoam_solver, self.result_file)], shell=True)
except OSError:
_logger.error("{} not found.".format(self.openfoam_solver))
_logger.error("Please make sure you are using modified version of OpenFOAM and env is prepared")
self._profiler.stop("Run solver")
def __parse_time(self, text):
found_exec = re.findall(r'ExecutionTime = (\d+.?\d*) s', text)[-1]
found_clock = re.findall(r'ClockTime = (\d+.?\d*) s', text)[-1]
exec_time = float(found_exec)
clock_time = float(found_clock)
# Save result to file
file_parsed_name = "{}-{}".format("time", self.parsed_name)
file_parsed_result = os.path.join(self.result_dir, file_parsed_name)
formatted_result = "{geometry}\t{fragmentation}\t{exec_time}\t{clock_time}\n".format(
geometry=self.geom_values,
fragmentation=self.fragmentation_values,
exec_time=exec_time, clock_time=clock_time)
with open(file_parsed_result, "a") as log_file:
if os.stat(file_parsed_result).st_size == 0:
log_file.write("{}"
"\tFragmentation width\tFragmentation height\tFragmentation length"
"\t{}\t{}\n".format(self.geom_titles, "Execution time", "Clock time"))
log_file.write(formatted_result)
def __parse_output(self, param_to_parse, text):
_logger.debug("Parse: {}".format(param_to_parse))
start_index = text.rfind("Max {} = ".format(param_to_parse))
len = text[start_index:].find('\n')
_logger.debug(text[start_index:start_index + len])
# (.123 250000 1.00009e+06 160325 7.29635e-10 2.36271e+06 0 -2.40131e-45 5.12455e-06 2.01673e-06 1.18136e-05)
p = re.compile(r'[-+]?[0-9]*\.?[0-9]+[eE]?[-+]?[0-9]*')
values = p.findall(text[start_index:start_index + len])
_logger.debug("Found values: {}".format(values))
float_val = []
for val in values:
float_val.append(float(val))
_logger.debug("Values as float: {}".format(float_val))
max_value = -1.
# FIXME Workaround for cantilever beam to use D which is with -D flag
if param_to_parse == "sigmaEq":
max_value = max(float_val)
elif param_to_parse == "D":
max_value = abs(max(float_val, key=abs))
_logger.info("Max (Min) {}: {}".format(param_to_parse, max_value))
# Save to map
self.results[param_to_parse] = max_value
# Save result to file
file_parsed_name = "{}-{}".format(param_to_parse, self.parsed_name)
file_parsed_result = os.path.join(self.result_dir, file_parsed_name)
formatted_result = "{geometry}\t{fragmentation}\t{value}\n".format(geometry=self.geom_values,
fragmentation=self.fragmentation_values,
value=max_value)
with open(file_parsed_result, "a") as log_file:
if os.stat(file_parsed_result).st_size == 0:
log_file.write("{}"
"\tFragmentation width\tFragmentation height\tFragmentation length"
"\t{}\n".format(self.geom_titles, param_to_parse))
log_file.write(formatted_result)
def __parse_output_from_file(self, param_to_parse):
with open(self.result_file, 'rt') as file:
contents = file.read()
# TODO yeaah, custom call for "time"!
if param_to_parse == "Time":
self.__parse_time(contents)
else:
self.__parse_output(param_to_parse, contents)
def get_results(self):
return self.results