def run():
"""
Change the password for a user and set up a cron job
to change it again based on the frequency
"""
# Since this is mostly a fire and forget script it needs
# broad exception handling so whatever traceback gets generated
# is sent out in the email
msg = 'General Failure'
success = 'Failure'
db_info = get_cfg()['config']
reciever, sender = get_addresses(db_info)
try:
username, freq = arg_parser()
old_pass = current_pass(db_info)
new_pass = change_pass(old_pass)
update_db(new_pass, db_info)
update_cron(username, freq)
msg = 'User: {0} password has been updated'.format(username)
success = 'Successful'
except Exception:
msg = str(traceback.format_exc())
finally:
send_email(sender, reciever, EMAIL_SUBJECT.format(success), msg)
def run():
opts = arg_parser()
cfg = get_cfg()['config']
if opts.cron:
setup_cron()
if opts.prev:
proc_prevmonth(cfg)
def main():
logging.basicConfig(
level=__LOGLEVEL__,
format="%(asctime)s : " +
"%(module)s (%(lineno)s) - %(levelname)s - %(message)s")
cfg_file = sys.argv[1] if len(sys.argv) > 1 else None
cfg = get_cfg(cfg_file)
qa = QuestionAnswerer(cfg)
qa.run()
def main():
logging.basicConfig(
level=__LOGLEVEL__,
format="%(asctime)s : " +
"%(module)s (%(lineno)s) - %(levelname)s - %(message)s")
cfg_file = sys.argv[1] if len(sys.argv) > 1 else None
cfg = get_cfg(cfg_file)
qa = QuestionAnswerer(cfg)
qa.run()
def test():
import sys
from utils import get_cfg
cfg = get_cfg(sys.argv[1])
m = Magyarlanc(cfg)
test_sens = ["valamely asztalon vagy padon az ablakra illesztett keret"]
# test_sens = ["Egy", "Hat", "Nyolc"]
for sen in test_sens:
for line in m.tag(sen):
print line
def test():
import sys
from utils import get_cfg
cfg = get_cfg(sys.argv[1])
m = Magyarlanc(cfg)
test_sens = ["valamely asztalon vagy padon az ablakra illesztett keret"]
# test_sens = ["Egy", "Hat", "Nyolc"]
for sen in test_sens:
for line in m.tag(sen):
print line
def main():
logging.basicConfig(
level=__LOGLEVEL__,
format="%(asctime)s : " +
"%(module)s (%(lineno)s) - %(levelname)s - %(message)s")
cfg_file = sys.argv[1] if len(sys.argv) > 1 else None
cfg = get_cfg(cfg_file)
text_to_4lang = TextTo4lang(cfg)
text_to_4lang.process()
def main():
logging.basicConfig(
level=__LOGLEVEL__,
format="%(asctime)s : " +
"%(module)s (%(lineno)s) - %(levelname)s - %(message)s")
cfg_file = sys.argv[1] if len(sys.argv) > 1 else None
cfg = get_cfg(cfg_file)
text_to_4lang = TextTo4lang(cfg)
text_to_4lang.process()
def initialize(cfg=None):
cfg = get_cfg(parse_args()) if cfg is None else cfg
# launch multi-process for DDP
# - processes will be branched off at this point
# - subprocess ignores launching process and returns None
if cfg.num_machines * cfg.num_gpus > 1:
log.info(C.green(f"[!] Lauching Multiprocessing.."))
cfg.spawn_ctx = launch(main_func=initialize,
num_gpus_per_machine=cfg.num_gpus,
num_machines=cfg.num_machines,
machine_rank=cfg.machine_rank,
dist_url=cfg.dist_url,
args=(cfg, ))
else:
cfg.spawn_ctx = None
# scatter save_dir to all of non-main ranks
cfg.save_dir = comm.scatter(cfg.save_dir)
# finalize config
C.set_enabled(not cfg.no_color) # for sub-processes
cfg.device = comm.get_local_rank()
cfg.freeze()
# file logging on the local ranks
set_stream_handler('comm', cfg.log_level) # for sub-processes
log_rank_file = f"log_rank_{comm.get_rank()}.txt"
set_file_handler('main', cfg.log_level, cfg.save_dir, log_rank_file)
set_stream_handler('error', cfg.log_level)
set_file_handler('error', cfg.log_level, cfg.save_dir, "log_error.txt")
if comm.is_main_process():
set_file_handler('result', cfg.log_level, "./", "log_result.txt")
# log distriubted learning
if comm.get_world_size() > 1:
log.info(f"[DDP] dist_url: {cfg.dist_url}")
log.info(f"[DDP] global_world_size = {comm.get_world_size()}")
log.info(f"[DDP] num_gpus_per_machine = {torch.cuda.device_count()}")
log.info(f"[DDP] machine_rank {cfg.machine_rank} / "
f"num_machines = {cfg.num_machines}")
comm.synchronize()
log_comm.info(f"[DDP] rank (local: {comm.get_local_rank()}, "
f"global: {comm.get_rank()}) has been spawned.")
comm.synchronize()
log.info(f"[DDP] Synchronized across all the ranks.")
if not cfg.spawn_ctx:
# This structure (including customized launch.py) is for compatibility
# with our internal API. There is no functional difference from the
# typical usage of distributed package. Please don't mind this
# pecularity and focus on the main algorithm.
for _ in train(cfg):
pass
return cfg
def get_crops(self):
"""Handles the request
of the API and input of the image
"""
cfg = get_cfg()
valid_augs_list = [
load_obj(i['class_name'])(**i['params'])
for i in cfg['augmentation']['valid']['augs']
]
valid_bbox_params = OmegaConf.to_container(
(cfg['augmentation']['valid']['bbox_params']))
valid_augs = A.Compose(valid_augs_list, bbox_params=valid_bbox_params)
test_dataset = ImgDataset(None, 'test', self.imageDir, cfg, valid_augs)
test_loader = DataLoader(test_dataset,
batch_size=cfg.data.batch_size,
num_workers=cfg.data.num_workers,
shuffle=False,
collate_fn=collate_fn)
device = torch.device('cuda:0' if torch.cuda.is_available() else 'cpu')
model = torch.load(
os.path.dirname(os.path.abspath(__file__)) +
f"/{str(self.imageDir).lower().split('/')[-1]}/model.pth",
map_location=device)
detection_threshold = 0.5
results = []
model.eval()
hparams = flatten_omegaconf(cfg)
lit_model = LitImg(hparams=hparams, cfg=cfg, model=model)
self.results = eval_model(test_loader, results, detection_threshold,
device, lit_model)
for i in range(len(self.results)):
if self.results[i]['image_id'] + '.JPG' == self.imageList[
self.cur - 1].split('/')[-1]:
self.mainPanel.create_rectangle(
int(int(self.results[i]['x1']) * self.scale),
int(int(self.results[i]['y1']) * self.scale),
int(int(self.results[i]['x2']) * self.scale),
int(int(self.results[i]['y2']) * self.scale),
width=2,
outline='red')
self.text_label.config(text='Crop: \n' + str(self.imageDir)[40:] +
'\nTotal: \n' + str(len(self.results)))
self.sub_button.config(state='disabled')
def main():
logging.basicConfig(
level=__LOGLEVEL__,
format="%(asctime)s : " +
"%(module)s (%(lineno)s) - %(levelname)s - %(message)s")
cfg_file = sys.argv[1] if len(sys.argv) > 1 else None
cfg = get_cfg(cfg_file)
# test_build_bulk(cfg)
# test_build(cfg)
test_lookup(cfg)
def main():
logging.basicConfig(
level=logging.INFO,
format="%(asctime)s : " +
"%(module)s (%(lineno)s) - %(levelname)s - %(message)s")
cfg_file = sys.argv[1] if len(sys.argv) > 1 else None
cfg = get_cfg(cfg_file)
lemmatizer = Lemmatizer(cfg)
while True:
word = raw_input('> ')
print lemmatizer.lemmatize(word)
def main():
logging.basicConfig(
level=logging.INFO,
format="%(asctime)s : " +
"%(module)s (%(lineno)s) - %(levelname)s - %(message)s")
cfg_file = sys.argv[1] if len(sys.argv) > 1 else None
cfg = get_cfg(cfg_file)
lemmatizer = Lemmatizer(cfg)
while True:
word = raw_input('> ')
print lemmatizer.lemmatize(word)
def main():
logging.basicConfig(
level=logging.INFO,
format="%(asctime)s : " +
"%(module)s (%(lineno)s) - %(levelname)s - %(message)s")
cfg_file = sys.argv[1] if len(sys.argv) > 1 else None
cfg = get_cfg(cfg_file)
dep_to_4lang = DepTo4lang(cfg)
dep_to_4lang.dep_to_4lang()
dep_to_4lang.save_machines()
dep_to_4lang.print_graphs()
def main():
logging.basicConfig(
level=logging.INFO,
format="%(asctime)s : " +
"%(module)s (%(lineno)s) - %(levelname)s - %(message)s")
cfg_file = sys.argv[1] if len(sys.argv) > 1 else None
cfg = get_cfg(cfg_file)
dep_to_4lang = DepTo4lang(cfg)
dep_to_4lang.dep_to_4lang()
dep_to_4lang.save_machines()
dep_to_4lang.print_graphs()
def run():
opts = arg_parser()
cfg = utils.get_cfg()
if not opts.environment:
raise ValueError('You must set the -e variable')
env = opts.environment
if opts.cron:
setup_cron(env)
if opts.prev:
proc_prevmonth(cfg['db'], env)
def run():
opts = arg_parser()
cfg = utils.get_cfg()
if not opts.environment:
raise ValueError('You must set the -e variable')
env = opts.environment
if opts.cron:
setup_cron(env)
if opts.prev:
proc_prevmonth(cfg['db'], env)
def main():
logging.basicConfig(
level=logging.INFO, format="%(asctime)s : " + "%(module)s (%(lineno)s) - %(levelname)s - %(message)s"
)
cfg_file = sys.argv[1] if len(sys.argv) > 1 else None
cfg = get_cfg(cfg_file)
sim_type = cfg.get("sim", "similarity_type")
if sim_type == "sentence":
main_sen_sim(cfg)
elif sim_type == "word":
raise Exception("main function for word sim not implemented yet")
elif sim_type == "word_test":
main_word_test(cfg)
else:
raise Exception("unknown similarity type: {0}".format(sim_type))
def main():
logging.basicConfig(
level=logging.INFO,
format="%(asctime)s : " +
"%(module)s (%(lineno)s) - %(levelname)s - %(message)s")
cfg_file = sys.argv[1] if len(sys.argv) > 1 else None
cfg = get_cfg(cfg_file)
sim_type = cfg.get('sim', 'similarity_type')
if sim_type == 'sentence':
main_sen_sim(cfg)
elif sim_type == 'word':
raise Exception("main function for word sim not implemented yet")
elif sim_type == 'word_test':
main_word_test(cfg)
else:
raise Exception('unknown similarity type: {0}'.format(sim_type))
def main():
logging.basicConfig(
level=__LOGLEVEL__,
format="%(asctime)s : " +
"%(module)s (%(lineno)s) - %(levelname)s - %(message)s")
cfg_file = sys.argv[1] if len(sys.argv) > 1 else None
max_sens = int(sys.argv[2]) if len(sys.argv) > 2 else None
cfg = get_cfg(cfg_file)
text_to_4lang = TextTo4lang(cfg)
input_fn = cfg.get('data', 'input_sens')
sens = [line.strip() for line in open(input_fn)]
if max_sens is not None:
sens = sens[:max_sens]
words_to_machines = text_to_4lang.process(sens, print_deps=True)
fn = print_text_graph(words_to_machines, cfg.get('machine', 'graph_dir'))
logging.info('wrote graph to {0}'.format(fn))
def main():
logging.basicConfig(
level=__LOGLEVEL__,
format="%(asctime)s : " +
"%(module)s (%(lineno)s) - %(levelname)s - %(message)s")
cfg_file = sys.argv[1] if len(sys.argv) > 1 else None
max_sens = int(sys.argv[2]) if len(sys.argv) > 2 else None
cfg = get_cfg(cfg_file)
text_to_4lang = TextTo4lang(cfg)
input_fn = cfg.get('data', 'input_sens')
sens = [line.strip() for line in open(input_fn)]
if max_sens is not None:
sens = sens[:max_sens]
words_to_machines = text_to_4lang.process(sens, print_deps=True)
fn = print_text_graph(words_to_machines, cfg.get('machine', 'graph_dir'))
logging.info('wrote graph to {0}'.format(fn))
def run():
rng = date_range()
defaults = {
'begin': rng[0],
'stop': rng[1],
'conf_file': utils.CONF_FILE,
'dir': os.path.join(os.path.expanduser('~'), 'temp-logs'),
'sensors': 'ALL'
}
opts = arg_parser(defaults)
cfg = utils.get_cfg(opts['conf_file'], section='config')
if opts['sensors'] == 'ALL':
opts['sensors'] = [k for k in SENSOR_KEYS if k != 'invalid']
elif opts['sensors'] == 'MODIS':
opts['sensors'] = [k for k in SENSOR_KEYS if k.startswith('m')]
elif opts['sensors'] == 'LANDSAT':
opts['sensors'] = [
k for k in SENSOR_KEYS
if any([s in k for s in ('tm4', 'tm5', 'etm7', 'oli')])
]
msg = ''
receive, sender, debug = get_addresses(cfg)
subject = EMAIL_SUBJECT.format(begin=opts['begin'], stop=opts['stop'])
try:
msg = process_monthly_metrics(cfg, opts['environment'], opts['dir'],
opts['begin'], opts['stop'],
tuple(opts['sensors']))
except Exception:
exc_msg = str(traceback.format_exc()) + '\n\n' + msg
if not opts['debug']:
utils.send_email(sender, debug, subject, exc_msg)
msg = ('There was an error with statistics processing.\n'
'The following have been notified of the error: {0}.'.format(
', '.join(debug)))
raise
finally:
if not opts['debug']:
utils.send_email(sender, receive, subject, msg)
def __init__(self, _database):
super().__init__()
self.database = _database
self.iconbitmap(icon)
self.title('RSA&AES Encryption')
self.geometry('442x252+200+100')
self.resizable(0, 0)
self.getkeylist()
self.setupUI()
self.cfg = utils.get_cfg(self.database)
self.cfg_url_entry.insert('0', self.cfg[0])
self.dir_save_entry.insert('0', self.cfg[1])
self.dir_out_entry.insert('0', self.cfg[1])
if self.thirdkeylist:
self.select_thirdkey(self.thirdkeylist[0])
self.thirdkey_ls.current(0)
if self.userkeylist:
self.select_userkey(
self.cfg[2] if self.cfg[2] else self.userkeylist[0])
self.userkey_ls.current(0)
self.wm_attributes('-topmost', 1)
def run():
"""
Change the password for a user
"""
# Since this is mostly a fire and forget script it needs
# broad exception handling so whatever traceback gets generated
# is sent out in the email
msg = 'General Failure'
status = 'Failure'
username, cfg_path = arg_parser()
db_info = get_cfg(cfg_path, section='config')
reciever, sender = get_addresses(db_info)
try:
old_pass = current_pass(db_info)
new_pass = change_pass(old_pass)
update_db(new_pass, db_info)
msg = 'User: {0} password has been updated'.format(username)
status = 'Successful'
except Exception:
msg = str(traceback.format_exc())
finally:
send_email(sender, reciever, EMAIL_SUBJECT.format(status), msg)
def setUp(self) -> None:
"""Set't up the tests
variables.
"""
imageDir = '/home/p1gm1/Documents/DroneSky/test_img/oil_palm'
cfg = get_cfg()
valid_augs_list = [
load_obj(i['class_name'])(**i['params'])
for i in cfg['augmentation']['valid']['augs']
]
valid_bbox_params = OmegaConf.to_container(
(cfg['augmentation']['valid']['bbox_params']))
valid_augs = A.Compose(valid_augs_list, bbox_params=valid_bbox_params)
self.test_dataset = ImgDataset(None, 'test', imageDir, cfg, valid_augs)
self.test_loader = DataLoader(self.test_dataset,
batch_size=cfg.data.batch_size,
num_workers=cfg.data.num_workers,
shuffle=False,
collate_fn=collate_fn)
key = word1 + "_" + word2
if key in self.shortest_path_dict.keys():
return self.shortest_path_dict[key]
else:
return 0
class MachineGraphOptions():
# nodename_option:
# 0: all nodes are unique
# 1: all nodes are printnames
# 2: only: uppercase + 'lack', 'before', 'not', 'have' are unique
def __init__(self, fullgraph_options):
self.nodename_option = fullgraph_options.nodename_option
self.upper_excl = fullgraph_options.upper_excl
self.embedding_weighted = fullgraph_options.embedding_weighted
if fullgraph_options.embedding_weighted:
self.embedding_model = fullgraph_options.embedding_model
self.color_based = fullgraph_options.color_based
if __name__ == "__main__":
logging.basicConfig(
level=logging.INFO,
format="%(asctime)s : " +
"%(module)s (%(lineno)s) - %(levelname)s - %(message)s")
cfg_file = sys.argv[1] if len(sys.argv) > 1 else None
cfg = get_cfg(cfg_file)
lexicon = Lexicon.build_from_4lang(cfg)
lexicon.save_to_binary(cfg.get("machine", "definitions_binary"))
def run():
rng = date_range()
defaults = {'begin': rng[0],
'stop': rng[1],
'conf_file': utils.CONF_FILE,
'dir': os.path.join(os.path.expanduser('~'), 'temp-logs'),
'sensors': 'ALL',
'plotting': False}
opts = arg_parser(defaults)
cfg = utils.get_cfg(opts['conf_file'], section='config')
if opts['sensors'] == 'ALL':
opts['sensors'] = [k for k in SENSOR_KEYS if k != 'invalid']
if opts['sensors'] == ['MODIS']:
opts['sensors'] = [k for k in SENSOR_KEYS if k.lower().startswith('m')]
if opts['sensors'] == ['VIIRS']:
opts['sensors'] = [k for k in SENSOR_KEYS if k.lower().startswith('v')]
if opts['sensors'] == ['LANDSAT']:
opts['sensors'] = [k for k in SENSOR_KEYS if k != 'invalid' and not k.lower().startswith('m')]
msg = ''
receive, sender, debug = get_addresses(cfg)
subject = EMAIL_SUBJECT.format(begin=opts['begin'], stop=opts['stop'])
# FIXME: adding cruft to the codebase... time constraints....
if not opts['plotting']:
try:
msg = process_monthly_metrics(cfg,
opts['environment'],
opts['dir'],
opts['begin'],
opts['stop'],
tuple(opts['sensors']))
except Exception:
exc_msg = str(traceback.format_exc()) + '\n\n' + msg
utils.send_email(sender, debug, subject, exc_msg)
msg = ('There was an error with statistics processing.\n'
'The following have been notified of the error: {0}.'
.format(', '.join(debug)))
raise
finally:
utils.send_email(sender, receive, subject, msg)
else:
# msg = '⚠ PLOTTING IS STILL UNDER DEVELOPMENT! ⚠'
files = []
try:
files.append(graphics.sensor_barchart(cfg, opts['begin'], opts['stop']))
files.append(graphics.pathrow_heatmap(cfg, opts['begin'],
opts['stop'], 'ALL'))
info = db_top10stats(opts['begin'], opts['stop'],
tuple(opts['sensors']), cfg)
for i, (email, _) in zip(range(3), info):
files.append(graphics.pathrow_heatmap(cfg, opts['begin'],
opts['stop'], email))
except Exception:
exc_msg = str(traceback.format_exc()) + '\n\n' + msg
utils.send_email(sender, debug, subject, exc_msg)
msg = ('There was an error with statistics processing.\n'
'The following have been notified of the error: {0}.'
.format(', '.join(debug)))
raise
finally:
utils.send_email(sender, receive, subject, msg, files)
__author__ = 'mjrao'
__time__ = '2017/4/27'
import web
import utils
import json
import jwt
import re
urls = (
'/phonebooks','Phonebooks',
)
dbinfo= utils.get_cfg('db.ini','mysql')
jwtinfo = utils.get_cfg('db.ini','jwt')
db = web.database(dbn='mysql', user=dbinfo.get('user',''),pw=dbinfo.get('password',''),db=dbinfo.get('database',''),host=dbinfo.get('host',''), port=int(dbinfo.get('port','')))
auth_operates = (1005,1006,10061,10062,1007,1009,1010)
class Phonebooks:
def POST(self):
data = web.data()
req_json = json.loads(data)
op = req_json.get('op',0)
'''
1001: register
1002: forgot password
1003: login
def __init__(self):
cfg = get_cfg(None)
self.textto4lang = TextTo4lang(cfg)
self.textto4lang.graphs_dir = '/home/adaamko/AACS18/4lang/data'
self.textto4lang.abstract = False
self.textto4lang.expand = False
content = file_list[j]
npos = content.index(',')
path = content[:npos]
classid = content[npos + 1:len(content) - 1]
image = utils.load_image(path, w, h, rgb2gray)
image = image / 255.0
images.append(image)
i += batchsize
images = np.array(images, dtype=np.float32)
yield epoch, images
if __name__ == '__main__':
# Training Data
cfg = utils.get_cfg(sys.argv[1])
file_list = utils.load_data(cfg['trainpath'])
batch = minibatch(file_list, cfg['batchsize'], cfg['width'], cfg['height'],
True)
# Training Parameters
learning_rate = cfg['learningrate']
num_steps = cfg['maxepoch']
batch_size = cfg['batchsize']
# Network Parameters
num_hidden_1 = cfg['hidden1num'] # 1st layer num features
num_hidden_2 = cfg['hidden2num'] # 2nd layer num features (the latent dim)
num_input = cfg['width'] * cfg['height'] * 1 # data input
network = ae.Autoencoder(num_input, num_hidden_1, num_hidden_2)
def _generate_mismatches_pairs(self):
"""
Generate all mismatches pairs
"""
for i, name in enumerate(os.listdir(self.data_dir)):
if name == ".DS_Store":
continue
remaining = os.listdir(self.data_dir)
remaining = [f_n for f_n in remaining if f_n != ".DS_Store"]
# del remaining[i] # deletes the file from the list, so that it is not chosen again
other_dir = random.choice(remaining)
with open(self.pairs_filepath, "a") as f:
for i in range(3):
file1 = random.choice(os.listdir(self.data_dir + name))
file2 = random.choice(os.listdir(self.data_dir +
other_dir))
f.write(name + "\t" + file1 + '\t' + other_dir + "\t" +
file2 + '\n')
f.write("\n")
if __name__ == '__main__':
print('load all config')
model_config = Map(yaml.safe_load(open('config/face_base.yaml')))
cfg = _merge_a_into_b(model_config, get_cfg(), get_cfg(), [])
data_dir = cfg.DATASETS.FOLDER + 'test/'
pairs_filepath = cfg.DATASETS.FOLDER + "pairs.txt"
img_ext = ".png"
generatePairs = GeneratePairs(data_dir, pairs_filepath, img_ext)
generatePairs.generate()
from utils import get_cfg, pi_camera
from PIL import Image
import cv2
import numpy as np
def show(x):
cv2.namedWindow('image', cv2.WINDOW_NORMAL)
cv2.resizeWindow('image',640,480)
cv2.imshow('image',x)
cv2.waitKey(0)
cv2.destroyAllWindows()
if __name__ == "__main__":
cfg = get_cfg("/home/pi/Desktop/iris/cfg/cfg.yaml")
cam = pi_camera(cfg)
cam.capture_images('left')
if key in self.shortest_path_dict.keys():
return self.shortest_path_dict[key]
else:
return 0
class MachineGraphOptions():
# nodename_option:
# 0: all nodes are unique
# 1: all nodes are printnames
# 2: only: uppercase + 'lack', 'before', 'not', 'have' are unique
def __init__(self, fullgraph_options):
self.nodename_option = fullgraph_options.nodename_option
self.upper_excl = fullgraph_options.upper_excl
self.weighted = fullgraph_options.weighted
self.embedding_model = fullgraph_options.embedding_model
self.color_based = fullgraph_options.color_based
if __name__ == "__main__":
logging.basicConfig(
level=logging.INFO,
format="%(asctime)s : " +
"%(module)s (%(lineno)s) - %(levelname)s - %(message)s")
cfg_file = sys.argv[1] if len(sys.argv) > 1 else None
cfg = get_cfg(cfg_file)
lexicon = Lexicon.build_from_4lang(cfg)
fourlang_fn = cfg.get("machine", "definitions_binary")
ensure_dir(os.path.dirname(fourlang_fn))
lexicon.save_to_binary(fourlang_fn)
from pymongo import MongoClient
from utils import get_cfg
db_name = get_cfg()['db_data']['test_db_name']
client = MongoClient(
"mongodb+srv://main_exterminated:[email protected]/partymakers_test?retryWrites=true&w=majority"
)
data = client.get_database('partymakers_test').get_collection('parties')
def get_last_id():
return get_all_parties()[-1]['id']
def create_party(**party_data):
try:
insert = data.insert_one({
"id": get_last_id() + 1,
"name": party_data['name'],
"desc": party_data['desc'],
"date": party_data['date'],
'coordinates': [*party_data['coordinates']],
'location': {
'main': party_data['location_main'],
'add': party_data['location_add'],
},
'price': party_data['price'],
'age': party_data['age']
})
if not insert:
raise Exception('')
