def single_partition_device_1_x(device, vars, log):
lvm_flag = parted.partition_flag_get_by_name("lvm")
try:
log.write("Using pyparted 1.x\n")
# wipe the old partition table
utils.sysexec("dd if=/dev/zero of=%s bs=512 count=1" % device, log)
# get the device
dev = parted.PedDevice.get(device)
# create a new partition table
disk = dev.disk_new_fresh(parted.disk_type_get("msdos"))
# create one big partition on each block device
constraint = dev.constraint_any()
new_part = disk.partition_new(parted.PARTITION_PRIMARY, parted.file_system_type_get("ext2"), 0, 1)
# make it an lvm partition
new_part.set_flag(lvm_flag, 1)
# actually add the partition to the disk
disk.add_partition(new_part, constraint)
disk.maximize_partition(new_part, constraint)
disk.commit()
del disk
except BootManagerException, e:
log.write("BootManagerException while running: %s\n" % str(e))
return 0
def single_partition_device_2_x(device, vars, log):
try:
log.write("Using pyparted 2.x\n")
# wipe the old partition table
utils.sysexec("dd if=/dev/zero of=%s bs=512 count=1" % device, log)
# get the device
dev = parted.Device(device)
# create a new partition table
disk = parted.freshDisk(dev, "msdos")
# create one big partition on each block device
constraint = parted.constraint.Constraint(device=dev)
geometry = parted.geometry.Geometry(device=dev, start=0, end=1)
fs = parted.filesystem.FileSystem(type="ext2", geometry=geometry)
new_part = parted.partition.Partition(disk, type=parted.PARTITION_NORMAL, fs=fs, geometry=geometry)
# make it an lvm partition
new_part.setFlag(parted.PARTITION_LVM)
# actually add the partition to the disk
disk.addPartition(new_part, constraint)
disk.maximizePartition(new_part, constraint)
disk.commit()
print >> log, "Current disk for %s" % device, disk
print >> log, "Current dev for %s" % device, dev
del disk
except Exception, e:
log.write("Exception inside single_partition_device_2_x : %s\n" % str(e))
import traceback
traceback.print_exc(file=log)
return 0
def partition_table(device, part_type, fs_type):
# wipe the old partition table
utils.sysexec(
"dd if=/dev/zero of={} bs=512 count=1".format(device), log)
# get the device
dev = parted.Device(device)
disk = parted.freshDisk(dev, part_type)
# create one big partition on each block device
constraint = parted.constraint.Constraint(device=dev)
geometry = parted.geometry.Geometry(device=dev, start=0, end=1)
fs = parted.filesystem.FileSystem(type=fs_type, geometry=geometry)
new_part = parted.partition.Partition(disk,
type=parted.PARTITION_NORMAL,
fs=fs,
geometry=geometry)
# make it an lvm partition
new_part.setFlag(parted.PARTITION_LVM)
# actually add the partition to the disk
disk.addPartition(new_part, constraint)
disk.maximizePartition(new_part, constraint)
disk.commit()
log.write("Current disk for {} - partition type {}\n{}\n".format(
device, part_type, disk))
log.write("Current dev for {}\n{}\n".format(device, dev))
del disk
def __init__(self, vars, mode):
utils.makedirs(self.mntpnt)
try:
utils.sysexec('mount -t auto -U {} {}'.format(vars['DISCONNECTED_OPERATION'], self.mntpnt))
# make sure it's not read-only
f = file('{}/api.cache'.format(self.mntpnt), 'a')
f.close()
file.__init__(self, '{}/api.cache'.format(self.mntpnt), mode)
except:
utils.sysexec_noerr('umount {}'.format(self.mntpnt))
raise BootManagerException("Couldn't find API-cache for disconnected operation")
def __init__(self, vars, mode):
utils.makedirs(self.mntpnt)
try:
utils.sysexec('mount -t auto -U %s %s' % (vars['DISCONNECTED_OPERATION'], self.mntpnt))
# make sure it's not read-only
f = file('%s/api.cache' % self.mntpnt, 'a')
f.close()
file.__init__(self, '%s/api.cache' % self.mntpnt, mode)
except:
utils.sysexec_noerr('umount %s' % self.mntpnt)
raise BootManagerException, "Couldn't find API-cache for disconnected operation"
def Run(vars, log):
"""
Rebuilds the system initrd, on first install or in case the
hardware changed.
"""
log.write("\n\nStep: Rebuilding initrd\n")
# make sure we have the variables we need
try:
SYSIMG_PATH = vars["SYSIMG_PATH"]
if SYSIMG_PATH == "":
raise ValueError("SYSIMG_PATH")
PARTITIONS = vars["PARTITIONS"]
if PARTITIONS == None:
raise ValueError("PARTITIONS")
except KeyError as var:
raise BootManagerException(
"Missing variable in vars: {}\n".format(var))
except ValueError as var:
raise BootManagerException(
"Variable in vars, shouldn't be: {}\n".format(var))
# mkinitrd needs /dev and /proc to do the right thing.
# /proc is already mounted, so bind-mount /dev here
# xxx tmp - trying to work around the f14 case:
# check that /dev/ is mounted with devtmpfs
# tmp - sysexec_noerr not returning what one would expect
# if utils.sysexec_noerr ("grep devtmpfs /proc/mounts") != 0:
utils.sysexec_noerr("mount -t devtmpfs none /dev")
utils.sysexec("mount -o bind /dev {}/dev".format(SYSIMG_PATH))
utils.sysexec("mount -t sysfs none {}/sys".format(SYSIMG_PATH))
initrd, kernel_version = systeminfo.getKernelVersion(vars, log)
try:
utils.removefile("{}/boot/{}".format(SYSIMG_PATH, initrd))
except:
log.write("{}/boot/{} is already removed\n".format(
SYSIMG_PATH, initrd))
# hack for CentOS 5.3
bypassRaidIfNeeded(SYSIMG_PATH, log)
# specify ext3 for fedora14 and above as their default fs is ext4
utils.sysexec_chroot(
SYSIMG_PATH,
"mkinitrd -v --with=ext3 --allow-missing /boot/initrd-{}.img {}".
format(kernel_version, kernel_version), log)
utils.sysexec_noerr("umount {}/sys".format(SYSIMG_PATH), log)
utils.sysexec_noerr("umount {}/dev".format(SYSIMG_PATH), log)
def create_raid_partition(partitions, vars, log):
"""
create raid array using specified partitions.
"""
raid_part = None
raid_enabled = False
node_tags = BootAPI.call_api_function(vars, "GetNodeTags",
({
'node_id': vars['NODE_ID']
}, ))
for node_tag in node_tags:
if node_tag['tagname'] == 'raid_enabled' and \
node_tag['value'] == '1':
raid_enabled = True
break
if not raid_enabled:
return raid_part
try:
log.write("Software raid enabled.\n")
# wipe everything
utils.sysexec_noerr("mdadm --stop /dev/md0", log)
time.sleep(1)
for part_path in partitions:
utils.sysexec_noerr(
"mdadm --zero-superblock {} ".format(part_path), log)
# assume each partiton is on a separate disk
num_parts = len(partitions)
if num_parts < 2:
log.write(
"Not enough disks for raid. Found: {}\n".format(partitions))
raise BootManagerException(
"Not enough disks for raid. Found: {}\n".format(partitions))
if num_parts == 2:
lvl = 1
else:
lvl = 5
# make the array
part_list = " ".join(partitions)
raid_part = "/dev/md0"
cmd = "mdadm --create {raid_part} --chunk=128 --level=raid{lvl} "\
"--raid-devices={num_parts} {part_list}".format(**locals())
utils.sysexec(cmd, log)
except BootManagerException as e:
log.write("create_raid_partition failed.\n")
raid_part = None
return raid_part
def install_from_sysimg_to_tmp(candidates, name):
import glob
found = None
for pattern in candidates:
matches = glob.glob(SYSIMG_PATH + pattern)
log.write("locating {}: found {} matches in {}\n".format(
name, len(matches), pattern))
if matches:
found = matches[0]
break
if not found:
raise Exception(
"Unable to locate {} for kexec'ing".format(name))
utils.sysexec("cp {} /tmp/{}".format(found, name))
def create_lvm_physical_volume(part_path, vars, log):
"""
make the specificed partition a lvm physical volume.
return 1 if successful, 0 otherwise.
"""
try:
# again, wipe any old data, this time on the partition
utils.sysexec("dd if=/dev/zero of=%s bs=512 count=1" % part_path, log)
### patch Thierry Parmentelat, required on some hardware
import time
time.sleep(1)
utils.sysexec("pvcreate -ffy %s" % part_path, log)
except BootManagerException, e:
log.write("create_lvm_physical_volume failed.\n")
return 0
def create_raid_partition(partitions, vars, log):
"""
create raid array using specified partitions.
"""
raid_part = None
raid_enabled = False
node_tags = BootAPI.call_api_function(vars, "GetNodeTags", ({"node_id": vars["NODE_ID"]},))
for node_tag in node_tags:
if node_tag["tagname"] == "raid_enabled" and node_tag["value"] == "1":
raid_enabled = True
break
if not raid_enabled:
return raid_part
try:
log.write("Software raid enabled.\n")
# wipe everything
utils.sysexec_noerr("mdadm --stop /dev/md0", log)
time.sleep(1)
for part_path in partitions:
utils.sysexec_noerr("mdadm --zero-superblock %s " % part_path, log)
# assume each partiton is on a separate disk
num_parts = len(partitions)
if num_parts < 2:
log.write("Not enough disks for raid. Found: %s\n" % partitions)
raise BootManagerException("Not enough disks for raid. Found: %s\n" % partitions)
if num_parts == 2:
lvl = 1
else:
lvl = 5
# make the array
part_list = " ".join(partitions)
raid_part = "/dev/md0"
cmd = (
"mdadm --create %(raid_part)s --chunk=128 --level=raid%(lvl)s " % locals()
+ "--raid-devices=%(num_parts)s %(part_list)s" % locals()
)
utils.sysexec(cmd, log)
except BootManagerException, e:
log.write("create_raid_partition failed.\n")
raid_part = None
def single_partition_device_1_x(device, vars, log):
lvm_flag = parted.partition_flag_get_by_name('lvm')
try:
log.write("Using pyparted 1.x\n")
# wipe the old partition table
utils.sysexec("dd if=/dev/zero of={} bs=512 count=1".format(device),
log)
# get the device
dev = parted.PedDevice.get(device)
# create a new partition table
disk = dev.disk_new_fresh(parted.disk_type_get("msdos"))
# create one big partition on each block device
constraint = dev.constraint_any()
new_part = disk.partition_new(parted.PARTITION_PRIMARY,
parted.file_system_type_get("ext2"), 0,
1)
# make it an lvm partition
new_part.set_flag(lvm_flag, 1)
# actually add the partition to the disk
disk.add_partition(new_part, constraint)
disk.maximize_partition(new_part, constraint)
disk.commit()
del disk
except BootManagerException as e:
log.write("BootManagerException while running: {}\n".format(str(e)))
return 0
except parted.error as e:
log.write("parted exception while running: {}\n".format(str(e)))
return 0
return 1
def create_lvm_physical_volume(part_path, vars, log):
"""
make the specificed partition a lvm physical volume.
return 1 if successful, 0 otherwise.
"""
try:
# again, wipe any old data, this time on the partition
utils.sysexec("dd if=/dev/zero of={} bs=512 count=1".format(part_path),
log)
### patch Thierry Parmentelat, required on some hardware
import time
time.sleep(1)
utils.sysexec("pvcreate -ffy {}".format(part_path), log)
except BootManagerException as e:
log.write("create_lvm_physical_volume failed.\n")
return 0
return 1
def __parse_configuration_file(vars, log, file_contents):
"""
parse a configuration file, set keys in var INTERFACE_SETTINGS
in vars (see comment for function ReadNodeConfiguration). this
also reads the mac address from the machine if successful parsing
of the configuration file is completed.
"""
INTERFACE_SETTINGS = vars["INTERFACE_SETTINGS"]
if file_contents is None:
log.write("__parse_configuration_file called with no file contents\n")
return 0
try:
line_num = 0
for line in file_contents.split("\n"):
line_num = line_num + 1
# if its a comment or a whitespace line, ignore
if line[:1] == "#" or string.strip(line) == "":
continue
# file is setup as name="value" pairs
parts = string.split(line, "=", 1)
name = string.strip(parts[0])
value = string.strip(parts[1])
# make sure value starts and ends with
# single or double quotes
quotes = value[0] + value[len(value) - 1]
if quotes != "''" and quotes != '""':
log.write("Invalid line {} in configuration file:\n".format(
line_num))
log.write(line + "\n")
return 0
# get rid of the quotes around the value
value = string.strip(value[1:len(value) - 1])
if name == "NODE_ID":
try:
vars['NODE_ID'] = int(value)
vars['WAS_NODE_ID_IN_CONF'] = 1
except ValueError as e:
log.write("Non-numeric node_id in configuration file.\n")
return 0
if name == "NODE_KEY":
vars['NODE_KEY'] = value
vars['WAS_NODE_KEY_IN_CONF'] = 1
if name == "IP_METHOD":
value = string.lower(value)
if value != "static" and value != "dhcp":
log.write("Invalid IP_METHOD in configuration file:\n")
log.write(line + "\n")
return 0
INTERFACE_SETTINGS['method'] = value.strip()
if name == "IP_ADDRESS":
INTERFACE_SETTINGS['ip'] = value.strip()
if name == "IP_GATEWAY":
INTERFACE_SETTINGS['gateway'] = value.strip()
if name == "IP_NETMASK":
INTERFACE_SETTINGS['netmask'] = value.strip()
if name == "IP_NETADDR":
INTERFACE_SETTINGS['network'] = value.strip()
if name == "IP_BROADCASTADDR":
INTERFACE_SETTINGS['broadcast'] = value.strip()
if name == "IP_DNS1":
INTERFACE_SETTINGS['dns1'] = value.strip()
if name == "IP_DNS2":
INTERFACE_SETTINGS['dns2'] = value.strip()
if name == "HOST_NAME":
INTERFACE_SETTINGS['hostname'] = string.lower(value)
if name == "DOMAIN_NAME":
INTERFACE_SETTINGS['domainname'] = string.lower(value)
if name == "NET_DEVICE":
INTERFACE_SETTINGS['mac'] = string.upper(value)
if name == "DISCONNECTED_OPERATION":
vars['DISCONNECTED_OPERATION'] = value.strip()
except IndexError as e:
log.write("Unable to parse configuration file\n")
return 0
# now if we are set to dhcp, clear out any fields
# that don't make sense
if INTERFACE_SETTINGS["method"] == "dhcp":
INTERFACE_SETTINGS["ip"] = ""
INTERFACE_SETTINGS["gateway"] = ""
INTERFACE_SETTINGS["netmask"] = ""
INTERFACE_SETTINGS["network"] = ""
INTERFACE_SETTINGS["broadcast"] = ""
INTERFACE_SETTINGS["dns1"] = ""
INTERFACE_SETTINGS["dns2"] = ""
log.write("Successfully read and parsed node configuration file.\n")
# if the mac wasn't specified, read it in from the system.
if INTERFACE_SETTINGS["mac"] == "":
device = "eth0"
mac_addr = utils.get_mac_from_interface(device)
if mac_addr is None:
log.write("Could not get mac address for device eth0.\n")
return 0
INTERFACE_SETTINGS["mac"] = string.upper(mac_addr)
log.write("Got mac address {} for device {}\n".format(
INTERFACE_SETTINGS["mac"], device))
# now, if the conf file didn't contain a node id, post the mac address
# to plc to get the node_id value
if vars['NODE_ID'] is None or vars['NODE_ID'] == 0:
log.write("Configuration file does not contain the node_id value.\n")
log.write("Querying PLC for node_id.\n")
bs_request = BootServerRequest.BootServerRequest(vars)
postVars = {"mac_addr": INTERFACE_SETTINGS["mac"]}
result = bs_request.DownloadFile("/boot/getnodeid.php", None, postVars,
1, 1, "/tmp/node_id")
if result == 0:
log.write("Unable to make request to get node_id.\n")
return 0
try:
node_id_file = file("/tmp/node_id", "r")
node_id = string.strip(node_id_file.read())
node_id_file.close()
except IOError:
log.write("Unable to read node_id from /tmp/node_id\n")
return 0
try:
node_id = int(string.strip(node_id))
except ValueError:
log.write(
"Got node_id from PLC, but not numeric: {}".format(node_id))
return 0
if node_id == -1:
log.write("Got node_id, but it returned -1\n\n")
log.write(
"------------------------------------------------------\n")
log.write(
"This indicates that this node could not be identified\n")
log.write("by PLC. You will need to add the node to your site,\n")
log.write("and regenerate the network configuration file.\n")
log.write("See the Technical Contact guide for node setup\n")
log.write("procedures.\n\n")
log.write("Boot process canceled until this is completed.\n")
log.write(
"------------------------------------------------------\n")
cancel_boot_flag = "/tmp/CANCEL_BOOT"
# this will make the initial script stop requesting scripts from PLC
utils.sysexec("touch {}".format(cancel_boot_flag), log)
return 0
log.write("Got node_id from PLC: {}\n".format(node_id))
vars['NODE_ID'] = node_id
if vars['NODE_KEY'] is None or vars['NODE_KEY'] == "":
log.write("Configuration file does not contain a node_key value.\n")
log.write("Using boot nonce instead.\n")
# 3.x cds stored the file in /tmp/nonce in ascii form, so they
# can be read and used directly. 2.x cds stored in the same place
# but in binary form, so we need to convert it to ascii the same
# way the old boot scripts did so it matches whats in the db
# (php uses bin2hex,
read_mode = "r"
try:
nonce_file = file("/tmp/nonce", read_mode)
nonce = nonce_file.read()
nonce_file.close()
except IOError:
log.write("Unable to read nonce from /tmp/nonce\n")
return 0
nonce = string.strip(nonce)
log.write("Read nonce, using as key.\n")
vars['NODE_KEY'] = nonce
# at this point, we've read the network configuration file.
# if we were setup using dhcp, get this system's current ip
# address and update the vars key ip, because it
# is needed for future api calls.
# at the same time, we can check to make sure that the hostname
# in the configuration file matches the ip address. if it fails
# notify the owners
hostname = INTERFACE_SETTINGS['hostname'] + "." + \
INTERFACE_SETTINGS['domainname']
# set to 0 if any part of the hostname resolution check fails
hostname_resolve_ok = 1
# set to 0 if the above fails, and, we are using dhcp in which
# case we don't know the ip of this machine (without having to
# parse ifconfig or something). In that case, we won't be able
# to make api calls, so printing a message to the screen will
# have to suffice.
can_make_api_call = 1
log.write("Checking that hostname {} resolves\n".format(hostname))
# try a regular dns lookup first
try:
resolved_node_ip = socket.gethostbyname(hostname)
except socket.gaierror as e:
hostname_resolve_ok = 0
if INTERFACE_SETTINGS['method'] == "dhcp":
if hostname_resolve_ok:
INTERFACE_SETTINGS['ip'] = resolved_node_ip
node_ip = resolved_node_ip
else:
can_make_api_call = 0
else:
node_ip = INTERFACE_SETTINGS['ip']
# make sure the dns lookup matches what the configuration file says
if hostname_resolve_ok:
if node_ip != resolved_node_ip:
log.write("Hostname {} does not resolve to {}, but {}:\n".format(
hostname, node_ip, resolved_node_ip))
hostname_resolve_ok = 0
else:
log.write("Hostname {} correctly resolves to {}:\n".format(
hostname, node_ip))
vars["INTERFACE_SETTINGS"] = INTERFACE_SETTINGS
if (not hostname_resolve_ok and not vars['DISCONNECTED_OPERATION']
and 'NAT_MODE' not in vars):
log.write("Hostname does not resolve correctly, will not continue.\n")
if can_make_api_call:
log.write("Notifying contacts of problem.\n")
vars['RUN_LEVEL'] = 'failboot'
vars['STATE_CHANGE_NOTIFY'] = 1
vars['STATE_CHANGE_NOTIFY_MESSAGE'] = \
notify_messages.MSG_HOSTNAME_NOT_RESOLVE
UpdateRunLevelWithPLC.Run(vars, log)
log.write("\n\n")
log.write("The hostname and/or ip in the network configuration\n")
log.write("file do not resolve and match.\n")
log.write("Please make sure the hostname set in the network\n")
log.write("configuration file resolves to the ip also specified\n")
log.write("there.\n\n")
log.write("Debug mode is being started on this cd. When the above\n")
log.write("is corrected, reboot the machine to try again.\n")
raise BootManagerException(
"Configured node hostname does not resolve.")
try:
log.write("Using NODE_ID {}\n".format(vars['NODE_ID']))
except:
log.write("Unknown NODE_ID")
return 1
ssh_home= "/root/.ssh"
cancel_boot_flag= "/tmp/CANCEL_BOOT"
sshd_started_flag= "/tmp/SSHD_RUNNING"
# pre-sshd
pre_sshd_script= os.path.join(ssh_source_files, "pre-sshd")
if os.path.exists(pre_sshd_script):
utils.sysexec_noerr( pre_sshd_script, log )
# create host keys if needed
if not os.path.isdir (ssh_dir):
utils.makedirs (ssh_dir)
key=ssh_dir+"/ssh_host_key"
if not os.path.isfile (key):
log.write("Creating host rsa1 key %s\n"%key)
utils.sysexec( "ssh-keygen -t rsa1 -b 1024 -f %s -N ''" % key, log )
key=ssh_dir+"/ssh_host_rsa_key"
if not os.path.isfile (key):
log.write("Creating host rsa key %s\n"%key)
utils.sysexec( "ssh-keygen -t rsa -f %s -N ''" % key, log )
key=ssh_dir+"/ssh_host_dsa_key"
if not os.path.isfile (key):
log.write("Creating host dsa key %s\n"%key)
utils.sysexec( "ssh-keygen -d -f %s -N ''" % key, log )
# (over)write sshd config
utils.sysexec( "cp -f %s/sshd_config %s/sshd_config" % (ssh_source_files,ssh_dir), log )
### xxx ### xxx ### xxx ### xxx ### xxx
# always update the key, may have changed in this instance of the bootmanager
def Run(vars, log):
"""
read the machines node configuration file, which contains
the node key and the node_id for this machine.
these files can exist in several different locations with
several different names. Below is the search order:
filename floppy flash ramdisk cd
plnode.txt 1 2 4 (/) 5 (/usr/boot), 6 (/usr)
planet.cnf 3
The locations will be searched in the above order, plnode.txt
will be checked first, then planet.cnf. Flash devices will only
be searched on 3.0 cds.
Because some of the earlier
boot cds don't validate the configuration file (which results
in a file named /tmp/planet-clean.cnf), and some do, lets
bypass this, and mount and attempt to read in the conf
file ourselves. If it doesn't exist, we cannot continue, and a
BootManagerException will be raised. If the configuration file is found
and read, return 1.
Expect the following variables from the store:
Sets the following variables from the configuration file:
WAS_NODE_ID_IN_CONF Set to 1 if the node id was in the conf file
WAS_NODE_KEY_IN_CONF Set to 1 if the node key was in the conf file
NONE_ID The db node_id for this machine
NODE_KEY The key for this node
INTERFACE_SETTINGS A dictionary of the values from the network
configuration file. keys set:
method IP_METHOD
ip IP_ADDRESS
mac NET_DEVICE
gateway IP_GATEWAY
network IP_NETADDR
broadcast IP_BROADCASTADDR
netmask IP_NETMASK
dns1 IP_DNS1
dns2 IP_DNS2
hostname HOST_NAME
domainname DOMAIN_NAME
-- wlan oriented --
ssid WLAN_SSID
iwconfig WLAN_IWCONFIG
the mac address is read from the machine unless it exists in the
configuration file.
"""
log.write("\n\nStep: Reading node configuration file.\n")
# make sure we have the variables we need
INTERFACE_SETTINGS = {}
INTERFACE_SETTINGS['method'] = "dhcp"
INTERFACE_SETTINGS['ip'] = ""
INTERFACE_SETTINGS['mac'] = ""
INTERFACE_SETTINGS['gateway'] = ""
INTERFACE_SETTINGS['network'] = ""
INTERFACE_SETTINGS['broadcast'] = ""
INTERFACE_SETTINGS['netmask'] = ""
INTERFACE_SETTINGS['dns1'] = ""
INTERFACE_SETTINGS['dns2'] = ""
INTERFACE_SETTINGS['hostname'] = "localhost"
INTERFACE_SETTINGS['domainname'] = "localdomain"
vars['INTERFACE_SETTINGS'] = INTERFACE_SETTINGS
vars['NODE_ID'] = 0
vars['NODE_KEY'] = ""
vars['WAS_NODE_ID_IN_CONF'] = 0
vars['WAS_NODE_KEY_IN_CONF'] = 0
vars['DISCONNECTED_OPERATION'] = ''
# for any devices that need to be mounted to get the configuration
# file, mount them here.
mount_point = "/tmp/conffilemount"
utils.makedirs(mount_point)
old_conf_file_contents = None
conf_file_contents = None
# 1. check the regular floppy device
log.write("Checking standard floppy disk for plnode.txt file.\n")
log.write("Mounting /dev/fd0 on {}\n".format(mount_point))
utils.sysexec_noerr(
"mount -o ro -t ext2,msdos /dev/fd0 {} ".format(mount_point), log)
conf_file_path = "{}/{}".format(mount_point, NEW_CONF_FILE_NAME)
# log.write("Checking for existence of {}\n".format(conf_file_path))
if os.access(conf_file_path, os.R_OK):
try:
conf_file = file(conf_file_path, "r")
conf_file_contents = conf_file.read()
conf_file.close()
log.write("Read in contents of file {}\n".format(conf_file_path))
except IOError as e:
log.write("Unable to read file {}\n".format(conf_file_path))
pass
utils.sysexec_noerr("umount {}".format(mount_point), log)
if __parse_configuration_file(vars, log, conf_file_contents):
log.write(
"ReadNodeConfiguration: [1] using {} from floppy /dev/fd0\n".
format(NEW_CONF_FILE_NAME))
return 1
else:
raise BootManagerException(
"Found configuration file plnode.txt "
"on floppy, but was unable to parse it.")
# try the old file name, same device. its actually number 3 on the search
# order, but do it now to save mounting/unmounting the disk twice.
# try to parse it later...
conf_file_path = "{}/{}".format(mount_point, OLD_CONF_FILE_NAME)
# this message really does not convey any useful information
# log.write("Checking for existence of %s (used later)\n" % conf_file_path)
if os.access(conf_file_path, os.R_OK):
try:
old_conf_file = file(conf_file_path, "r")
old_conf_file_contents = old_conf_file.read()
old_conf_file.close()
log.write("Read in contents of file {}\n".format(conf_file_path))
except IOError as e:
log.write("Unable to read file {}\n".format(conf_file_path))
pass
utils.sysexec_noerr("umount {}".format(mount_point), log)
# 2. check flash devices on 3.0 based cds
log.write("Checking flash devices for plnode.txt file.\n")
# this is done the same way the 3.0 cds do it, by attempting
# to mount and sd*1 devices that are removable
devices = os.listdir("/sys/block/")
for device in devices:
if device[:2] != "sd":
log.write("Skipping non-scsi device {}\n".format(device))
continue
# test removable
removable_file_path = "/sys/block/{}/removable".format(device)
try:
removable = int(file(removable_file_path, "r").read().strip())
except ValueError as e:
continue
except IOError as e:
continue
if not removable:
log.write("Skipping non-removable device {}\n".format(device))
continue
log.write("Checking removable device {}\n".format(device))
partitions = file("/proc/partitions", "r")
for line in partitions:
found_file = 0
parsed_file = 0
if not re.search("{}[0-9]*$".format(device), line):
continue
try:
# major minor #blocks name
parts = string.split(line)
# ok, try to mount it and see if we have a conf file.
full_device = "/dev/{}".format(parts[3])
except IndexError as e:
log.write(
"Incorrect /proc/partitions line:\n{}\n".format(line))
continue
log.write("Mounting {} on {}\n".format(full_device, mount_point))
try:
utils.sysexec(
"mount -o ro -t ext2,msdos {} {}".format(
full_device, mount_point), log)
except BootManagerException as e:
log.write("Unable to mount, trying next partition\n")
continue
conf_file_path = "{}/{}".format(mount_point, NEW_CONF_FILE_NAME)
log.write("Checking for existence of {}\n".format(conf_file_path))
if os.access(conf_file_path, os.R_OK):
try:
conf_file = file(conf_file_path, "r")
conf_file_contents = conf_file.read()
conf_file.close()
found_file = 1
log.write(
"Read in contents of file {}\n".format(conf_file_path))
if __parse_configuration_file(vars, log,
conf_file_contents):
parsed_file = 1
except IOError as e:
log.write(
"Unable to read file {}\n".format(conf_file_path))
utils.sysexec_noerr("umount {}".format(mount_point), log)
if found_file:
if parsed_file:
log.write(
"ReadNodeConfiguration: [2] using {} from partition {}\n"
.format(NEW_CONF_FILE_NAME, full_device))
return 1
else:
raise BootManagerException(
"Found configuration file on {}, "
"but was unable to parse it.".format(full_device))
# 3. check standard floppy disk for old file name planet.cnf
log.write(
"Checking standard floppy disk for planet.cnf file (for legacy nodes).\n"
)
if old_conf_file_contents:
if __parse_configuration_file(vars, log, old_conf_file_contents):
log.write(
"ReadNodeConfiguration: [3] using {} from floppy /dev/fd0\n".
format(OLD_CONF_FILE_NAME))
return 1
else:
raise BootManagerException(
"Found configuration file planet.cnf "
"on floppy, but was unable to parse it.")
# 4. check for plnode.txt in / (ramdisk)
log.write("Checking / (ramdisk) for plnode.txt file.\n")
conf_file_path = "/{}".format(NEW_CONF_FILE_NAME)
log.write("Checking for existence of {}\n".format(conf_file_path))
if os.access(conf_file_path, os.R_OK):
try:
conf_file = file(conf_file_path, "r")
conf_file_contents = conf_file.read()
conf_file.close()
log.write("Read in contents of file {}\n".format(conf_file_path))
except IOError as e:
log.write("Unable to read file {}\n".format(conf_file_path))
pass
if __parse_configuration_file(vars, log, conf_file_contents):
log.write(
"ReadNodeConfiguration: [4] using {} from ramdisk\n".format(
NEW_CONF_FILE_NAME))
return 1
else:
raise BootManagerException("Found configuration file plnode.txt "
"in /, but was unable to parse it.")
# 5. check for plnode.txt in /usr/boot (mounted already)
log.write("Checking /usr/boot (cd) for plnode.txt file.\n")
conf_file_path = "/usr/boot/{}".format(NEW_CONF_FILE_NAME)
log.write("Checking for existence of {}\n".format(conf_file_path))
if os.access(conf_file_path, os.R_OK):
try:
conf_file = file(conf_file_path, "r")
conf_file_contents = conf_file.read()
conf_file.close()
log.write("Read in contents of file {}\n".format(conf_file_path))
except IOError as e:
log.write("Unable to read file {}\n".format(conf_file_path))
pass
if __parse_configuration_file(vars, log, conf_file_contents):
log.write(
"ReadNodeConfiguration: [5] using {} from CD in /usr/boot\n".
format(NEW_CONF_FILE_NAME))
return 1
else:
raise BootManagerException(
"Found configuration file plnode.txt "
"in /usr/boot, but was unable to parse it.")
# 6. check for plnode.txt in /usr (mounted already)
log.write("Checking /usr (cd) for plnode.txt file.\n")
conf_file_path = "/usr/{}".format(NEW_CONF_FILE_NAME)
log.write("Checking for existence of {}\n".format(conf_file_path))
if os.access(conf_file_path, os.R_OK):
try:
conf_file = file(conf_file_path, "r")
conf_file_contents = conf_file.read()
conf_file.close()
log.write("Read in contents of file {}\n".format(conf_file_path))
except IOError as e:
log.write("Unable to read file {}\n".format(conf_file_path))
pass
if __parse_configuration_file(vars, log, conf_file_contents):
log.write("ReadNodeConfiguration: [6] using {} from /usr\n".format(
NEW_CONF_FILE_NAME))
return 1
else:
raise BootManagerException("Found configuration file plnode.txt "
"in /usr, but was unable to parse it.")
raise BootManagerException(
"Unable to find and read a node configuration file.")
if not re.search("%s[0-9]*$" % device, line):
continue
try:
# major minor #blocks name
parts= string.split(line)
# ok, try to mount it and see if we have a conf file.
full_device= "/dev/%s" % parts[3]
except IndexError, e:
log.write( "Incorrect /proc/partitions line:\n%s\n" % line )
continue
log.write( "Mounting %s on %s\n" % (full_device,mount_point) )
try:
utils.sysexec( "mount -o ro -t ext2,msdos %s %s" \
% (full_device,mount_point), log )
except BootManagerException, e:
log.write( "Unable to mount, trying next partition\n" )
continue
conf_file_path= "%s/%s" % (mount_point,NEW_CONF_FILE_NAME)
log.write( "Checking for existence of %s\n" % conf_file_path )
if os.access( conf_file_path, os.R_OK ):
try:
conf_file= file(conf_file_path,"r")
conf_file_contents= conf_file.read()
conf_file.close()
found_file= 1
log.write( "Read in contents of file %s\n" % \
conf_file_path )
def Run(vars, log):
"""
Find any new large block devices we can add to the vservers volume group
Expect the following variables to be set:
SYSIMG_PATH the path where the system image will be mounted
MINIMUM_DISK_SIZE any disks smaller than this size, in GB, are not used
NODE_MODEL_OPTIONS the node's model options
Set the following variables upon successfully running:
ROOT_MOUNTED the node root file system is mounted
"""
log.write("\n\nStep: Checking for unused disks to add to LVM.\n")
# make sure we have the variables we need
try:
SYSIMG_PATH = vars["SYSIMG_PATH"]
if SYSIMG_PATH == "":
raise ValueError("SYSIMG_PATH")
MINIMUM_DISK_SIZE = int(vars["MINIMUM_DISK_SIZE"])
PARTITIONS = vars["PARTITIONS"]
if PARTITIONS == None:
raise ValueError("PARTITIONS")
NODE_MODEL_OPTIONS = vars["NODE_MODEL_OPTIONS"]
except KeyError as var:
raise BootManagerException(
"Missing variable in vars: {}\n".format(var))
except ValueError as var:
raise BootManagerException(
"Variable in vars, shouldn't be: {}\n".format(var))
devices_dict = systeminfo.get_block_devices_dict(vars, log)
# will contain the new devices to add to the volume group
new_devices = []
# total amount of new space in gb
extended_gb_size = 0
utils.display_disks_status(PARTITIONS, "In CheckForNewDisks", log)
for device, details in devices_dict.items():
(major, minor, blocks, gb_size, readonly) = details
if device[:14] == "/dev/planetlab":
log.write("Skipping device {} in volume group.\n".format(device))
continue
if readonly:
log.write("Skipping read only device {}\n".format(device))
continue
if gb_size < MINIMUM_DISK_SIZE:
log.write("Skipping too small device {} ({:4.2f}) Gb\n"\
.format(device, gb_size))
continue
log.write("Checking device {} to see if it is part " \
"of the volume group.\n".format(device))
# Thierry - June 2015
# when introducing the 'upgrade' verb, we ran into the situation
# where 'pvdisplay' at this point displays e.g. /dev/sda, instead
# of /dev/sda1
# we thus consider that if either of these is known, then
# the disk is already part of LVM
first_partition = InstallPartitionDisks.get_partition_path_from_device(
device, vars, log)
probe_first_part = "pvdisplay {} | grep -q planetlab".format(
first_partition)
probe_device = "pvdisplay {} | grep -q planetlab".format(device)
already_added = utils.sysexec_noerr(probe_first_part, log, shell=True) \
or utils.sysexec_noerr(probe_device, log, shell=True)
if already_added:
log.write("It appears {} is part of the volume group, continuing.\n"\
.format(device))
continue
# just to be extra paranoid, ignore the device if it already has
# an lvm partition on it (new disks won't have this, and that is
# what this code is for, so it should be ok).
cmd = "parted --script --list {} | grep -q lvm$".format(device)
has_lvm = utils.sysexec_noerr(cmd, log, shell=True)
if has_lvm:
log.write(
"It appears {} has lvm already setup on it.\n".format(device))
paranoid = False
if paranoid:
log.write(
"Too paranoid to add {} to vservers lvm.\n".format(device))
continue
if not InstallPartitionDisks.single_partition_device(
device, vars, log):
log.write("Unable to partition {}, not using it.\n".format(device))
continue
log.write("Successfully partitioned {}\n".format(device))
if NODE_MODEL_OPTIONS & ModelOptions.RAWDISK:
log.write("Running on a raw disk node, not using it.\n")
continue
part_path = InstallPartitionDisks.get_partition_path_from_device(
device, vars, log)
log.write("Attempting to add {} to the volume group\n".format(device))
if not InstallPartitionDisks.create_lvm_physical_volume(
part_path, vars, log):
log.write("Unable to create lvm physical volume {}, not using it.\n"\
.format(part_path))
continue
log.write("Adding {} to list of devices to add to "
"planetlab volume group.\n".format(device))
extended_gb_size = extended_gb_size + gb_size
new_devices.append(part_path)
if len(new_devices) > 0:
log.write("Extending planetlab volume group.\n")
log.write("Unmounting disks.\n")
try:
# backwards compat, though, we should never hit this case post PL 3.2
os.stat("{}/rcfs/taskclass".format(SYSIMG_PATH))
utils.sysexec_chroot_noerr(SYSIMG_PATH, "umount /rcfs", log)
except OSError as e:
pass
# umount in order to extend disk size
utils.sysexec_noerr("umount {}/proc".format(SYSIMG_PATH), log)
utils.sysexec_noerr("umount {}/vservers".format(SYSIMG_PATH), log)
utils.sysexec_noerr("umount {}".format(SYSIMG_PATH), log)
utils.sysexec("vgchange -an", log)
vars['ROOT_MOUNTED'] = 0
while True:
cmd = "vgextend planetlab {}".format(" ".join(new_devices))
if not utils.sysexec_noerr(cmd, log):
log.write("Failed to add physical volumes {} to "\
"volume group, continuing.\n".format(" ".join(new_devices)))
res = 1
break
# now, get the number of unused extents, and extend the vserver
# logical volume by that much.
remaining_extents = \
InstallPartitionDisks.get_remaining_extents_on_vg(vars, log)
log.write("Extending vservers logical volume.\n")
utils.sysexec("vgchange -ay", log)
cmd = "lvextend -l +{} {}".format(remaining_extents,
PARTITIONS["vservers"])
if not utils.sysexec_noerr(cmd, log):
log.write(
"Failed to extend vservers logical volume, continuing\n")
res = 1
break
log.write(
"making the ext filesystem match new logical volume size.\n")
vars['ROOT_MOUNTED'] = 1
cmd = "mount {} {}".format(PARTITIONS["root"], SYSIMG_PATH)
utils.sysexec_noerr(cmd, log)
cmd = "mount {} {}/vservers".format(PARTITIONS["vservers"],
SYSIMG_PATH)
utils.sysexec_noerr(cmd, log)
cmd = "resize2fs {}".format(PARTITIONS["vservers"])
resize = utils.sysexec_noerr(cmd, log)
utils.sysexec_noerr("umount {}/vservers".format(SYSIMG_PATH), log)
utils.sysexec_noerr("umount {}".format(SYSIMG_PATH), log)
vars['ROOT_MOUNTED'] = 0
utils.sysexec("vgchange -an", log)
if not resize:
log.write("Failed to resize vservers partition, continuing.\n")
res = 1
break
else:
log.write("Extended vservers partition by {:4.2f} Gb\n"\
.format(extended_gb_size))
res = 1
break
else:
log.write("No new disk devices to add to volume group.\n")
res = 1
return res
fstab.write("none /dev/shm tmpfs defaults 0 0\n")
fstab.write("none /dev/pts devpts defaults 0 0\n")
fstab.close()
log.write("Writing system /etc/issue\n")
issue = file("{}/etc/issue".format(SYSIMG_PATH), "w")
issue.write("PlanetLab Node: \\n\n")
issue.write("Kernel \\r on an \\m\n")
issue.write("http://www.planet-lab.org\n\n")
issue.close()
if (vars['ONE_PARTITION'] != '1'):
log.write("Setting up authentication (non-ssh)\n")
utils.sysexec_chroot(SYSIMG_PATH, "authconfig --nostart --kickstart --enablemd5 " \
"--enableshadow", log)
utils.sysexec("sed -e 's/^root\:\:/root\:*\:/g' " \
"{}/etc/shadow > {}/etc/shadow.new".format(SYSIMG_PATH, SYSIMG_PATH), log)
utils.sysexec_chroot(SYSIMG_PATH, "mv " \
"/etc/shadow.new /etc/shadow", log)
utils.sysexec_chroot(SYSIMG_PATH, "chmod 400 /etc/shadow", log)
# if we are setup with dhcp, copy the current /etc/resolv.conf into
# the system image so we can run programs inside that need network access
method = ""
try:
method = vars['INTERFACE_SETTINGS']['method']
except:
pass
if method == "dhcp":
utils.sysexec("cp /etc/resolv.conf {}/etc/".format(SYSIMG_PATH), log)
fstab.write( "none /dev/shm tmpfs defaults 0 0\n" )
fstab.write( "none /dev/pts devpts defaults 0 0\n" )
fstab.close()
log.write( "Writing system /etc/issue\n" )
issue= file( "%s/etc/issue" % SYSIMG_PATH, "w" )
issue.write( "PlanetLab Node: \\n\n" )
issue.write( "Kernel \\r on an \\m\n" )
issue.write( "http://www.planet-lab.org\n\n" )
issue.close()
log.write( "Setting up authentication (non-ssh)\n" )
utils.sysexec_chroot( SYSIMG_PATH, "authconfig --nostart --kickstart --enablemd5 " \
"--enableshadow", log )
utils.sysexec( "sed -e 's/^root\:\:/root\:*\:/g' " \
"%s/etc/shadow > %s/etc/shadow.new" % \
(SYSIMG_PATH,SYSIMG_PATH), log )
utils.sysexec_chroot( SYSIMG_PATH, "mv " \
"/etc/shadow.new /etc/shadow", log )
utils.sysexec_chroot( SYSIMG_PATH, "chmod 400 /etc/shadow", log )
# if we are setup with dhcp, copy the current /etc/resolv.conf into
# the system image so we can run programs inside that need network access
method= ""
try:
method= vars['INTERFACE_SETTINGS']['method']
except:
pass
if method == "dhcp":
utils.sysexec( "cp /etc/resolv.conf %s/etc/" % SYSIMG_PATH, log )
def update_vserver_network_files(vserver_dir, vars, log):
"""
Update the /etc/resolv.conf and /etc/hosts files in the specified
vserver directory. If the files do not exist, write them out. If they
do exist, rewrite them with new values if the file UPDATE_FILE_FLAG
exists it /etc. if this is called with the vserver-reference directory,
always update the network config files and create the UPDATE_FILE_FLAG.
This is currently called when setting up the initial vserver reference,
and later when nodes boot to update existing vserver images.
Expect the following variables from the store:
SYSIMG_PATH the path where the system image will be mounted
(always starts with TEMP_PATH)
INTERFACE_SETTINGS A dictionary of the values from the network
configuration file
"""
try:
SYSIMG_PATH = vars["SYSIMG_PATH"]
if SYSIMG_PATH == "":
raise ValueError("SYSIMG_PATH")
INTERFACE_SETTINGS = vars["INTERFACE_SETTINGS"]
if INTERFACE_SETTINGS == "":
raise ValueError("INTERFACE_SETTINGS")
except KeyError as var:
raise BootManagerException(
"Missing variable in vars: {}\n".format(var))
except ValueError as var:
raise BootManagerException(
"Variable in vars, shouldn't be: {}\n".format(var))
try:
ip = INTERFACE_SETTINGS['ip']
method = INTERFACE_SETTINGS['method']
hostname = INTERFACE_SETTINGS['hostname']
domainname = INTERFACE_SETTINGS['domainname']
except KeyError as var:
raise BootManagerException(
"Missing network value {} in var INTERFACE_SETTINGS\n".format(var))
try:
os.listdir(vserver_dir)
except OSError:
log.write(
"Directory {} does not exist to write network conf in.\n".format(
vserver_dir))
return
file_path = "{}/etc/{}".format(vserver_dir, UPDATE_FILE_FLAG)
update_files = 0
if os.access(file_path, os.F_OK):
update_files = 1
# Thierry - 2012/03 - I'm renaming vserver-reference into sliceimage
# however I can't quite grasp the reason for this test below, very likely
# compatibility with very old node images or something
if '/.vref/' in vserver_dir or \
'/.vcache/' in vserver_dir or \
'/vserver-reference' in vserver_dir:
log.write(
"Forcing update on vserver reference directory:\n{}\n".format(
vserver_dir))
utils.sysexec_noerr(
"echo '{}' > {}/etc/{}".format(UPDATE_FILE_FLAG, vserver_dir,
UPDATE_FILE_FLAG), log)
update_files = 1
if update_files:
log.write("Updating network files in {}.\n".format(vserver_dir))
try:
# NOTE: this works around a recurring problem on public pl,
# suspected to be due to mismatch between 2.6.12 bootcd and
# 2.6.22/f8 root environment. files randomly show up with the
# immutible attribute set. this clears it before trying to write
# the files below.
utils.sysexec("chattr -i {}/etc/hosts".format(vserver_dir), log)
utils.sysexec("chattr -i {}/etc/resolv.conf".format(vserver_dir),
log)
except:
pass
file_path = "{}/etc/hosts".format(vserver_dir)
hosts_file = file(file_path, "w")
hosts_file.write("127.0.0.1 localhost\n")
if method == "static":
hosts_file.write("{} {}.{}\n".format(ip, hostname, domainname))
hosts_file.close()
hosts_file = None
file_path = "{}/etc/resolv.conf".format(vserver_dir)
if method == "dhcp":
# copy the resolv.conf from the boot cd env.
utils.sysexec("cp /etc/resolv.conf {}/etc".format(vserver_dir),
log)
else:
# copy the generated resolv.conf from the system image, since
# we generated it via static settings
utils.sysexec(
"cp {}/etc/resolv.conf {}/etc".format(SYSIMG_PATH,
vserver_dir), log)
return
log.write( "Extending planetlab volume group.\n" )
log.write( "Unmounting disks.\n" )
try:
# backwards compat, though, we should never hit this case post PL 3.2
os.stat("%s/rcfs/taskclass"%SYSIMG_PATH)
utils.sysexec_chroot_noerr( SYSIMG_PATH, "umount /rcfs", log )
except OSError, e:
pass
# umount in order to extend disk size
utils.sysexec_noerr( "umount %s/proc" % SYSIMG_PATH, log )
utils.sysexec_noerr( "umount %s/vservers" % SYSIMG_PATH, log )
utils.sysexec_noerr( "umount %s" % SYSIMG_PATH, log )
utils.sysexec( "vgchange -an", log )
vars['ROOT_MOUNTED']= 0
while True:
cmd = "vgextend planetlab %s" % string.join(new_devices," ")
if not utils.sysexec_noerr( cmd, log ):
log.write( "Failed to add physical volumes %s to " \
"volume group, continuing.\n" % string.join(new_devices," "))
res = 1
break
# now, get the number of unused extents, and extend the vserver
# logical volume by that much.
remaining_extents= \
InstallPartitionDisks.get_remaining_extents_on_vg( vars, log )
except ValueError, var:
raise BootManagerException, "Variable in vars, shouldn't be: %s\n" % var
ROOT_MOUNTED= 0
if vars.has_key('ROOT_MOUNTED'):
ROOT_MOUNTED= vars['ROOT_MOUNTED']
if ROOT_MOUNTED == 0:
log.write( "Mounting node partitions\n" )
# simply creating an instance of this class and listing the system
# block devices will make them show up so vgscan can find the planetlab
# volume group
systeminfo.get_block_device_list(vars, log)
utils.sysexec( "vgscan", log )
utils.sysexec( "vgchange -ay planetlab", log )
utils.makedirs( SYSIMG_PATH )
cmd = "mount %s %s" % (PARTITIONS["root"],SYSIMG_PATH)
utils.sysexec( cmd, log )
cmd = "mount -t proc none %s/proc" % SYSIMG_PATH
utils.sysexec( cmd, log )
cmd = "mount %s %s/vservers" % (PARTITIONS["vservers"],SYSIMG_PATH)
utils.sysexec( cmd, log )
ROOT_MOUNTED= 1
vars['ROOT_MOUNTED']= 1
ROOT_MOUNTED= 0
if vars.has_key('ROOT_MOUNTED'):
ROOT_MOUNTED= vars['ROOT_MOUNTED']
# mount the root system image if we haven't already.
# capture BootManagerExceptions during the vgscan/change and mount
# calls, so we can return 0 instead
if ROOT_MOUNTED == 0:
# simply creating an instance of this class and listing the system
# block devices will make them show up so vgscan can find the planetlab
# volume group
systeminfo.get_block_device_list(vars, log)
try:
utils.sysexec( "vgscan", log )
utils.sysexec( "vgchange -ay planetlab", log )
except BootManagerException, e:
log.write( "BootManagerException during vgscan/vgchange: %s\n" %
str(e) )
return 0
utils.makedirs( SYSIMG_PATH )
for filesystem in ("root","vservers"):
try:
# first run fsck to prevent fs corruption from hanging mount...
log.write( "fsck %s file system\n" % filesystem )
utils.sysexec("e2fsck -v -p %s" % (PARTITIONS[filesystem]), log, fsck=True)
except BootManagerException, e:
log.write( "BootManagerException during fsck of %s (%s) filesystem : %s\n" %
except ValueError, var:
raise BootManagerException, "Variable in vars, shouldn't be: %s\n" % var
try:
# make sure the required partitions exist
val = PARTITIONS["root"]
val = PARTITIONS["swap"]
val = PARTITIONS["vservers"]
except KeyError, part:
log.write("Missing partition in PARTITIONS: %s\n" % part)
return 0
bs_request = BootServerRequest.BootServerRequest(vars)
log.write("turning on swap space\n")
utils.sysexec("swapon %s" % PARTITIONS["swap"], log)
# make sure the sysimg dir is present
utils.makedirs(SYSIMG_PATH)
log.write("mounting root file system\n")
utils.sysexec("mount -t ext3 %s %s" % (PARTITIONS["root"], SYSIMG_PATH), log)
log.write("mounting vserver partition in root file system\n")
utils.makedirs(SYSIMG_PATH + "/vservers")
utils.sysexec("mount -t ext3 %s %s/vservers" % (PARTITIONS["vservers"], SYSIMG_PATH), log)
vars["ROOT_MOUNTED"] = 1
# call getNodeFlavour
try:
def Run(vars, upgrade, log):
"""
Download core + extensions bootstrapfs tarballs and install on the hard drive
the upgrade boolean is True when we are upgrading a node root install while
preserving its slice contents; in that case we just perform extra cleanup
before unwrapping the bootstrapfs
this is because the running system may have extraneous files
that is to say, files that are *not* present in the bootstrapfs
and that can impact/clobber the resulting upgrade
Expect the following variables from the store:
SYSIMG_PATH the path where the system image will be mounted
PARTITIONS dictionary of generic part. types (root/swap)
and their associated devices.
NODE_ID the id of this machine
Sets the following variables:
TEMP_BOOTCD_PATH where the boot cd is remounted in the temp
path
ROOT_MOUNTED set to 1 when the the base logical volumes
are mounted.
"""
log.write("\n\nStep: Install: bootstrapfs tarball (upgrade={}).\n".format(
upgrade))
# make sure we have the variables we need
try:
SYSIMG_PATH = vars["SYSIMG_PATH"]
if SYSIMG_PATH == "":
raise ValueError("SYSIMG_PATH")
PARTITIONS = vars["PARTITIONS"]
if PARTITIONS == None:
raise ValueError("PARTITIONS")
NODE_ID = vars["NODE_ID"]
if NODE_ID == "":
raise ValueError("NODE_ID")
VERSION = vars['VERSION'] or 'unknown'
except KeyError as var:
raise BootManagerException(
"Missing variable in vars: {}\n".format(var))
except ValueError as var:
raise BootManagerException(
"Variable in vars, shouldn't be: {}\n".format(var))
try:
# make sure the required partitions exist
val = PARTITIONS["root"]
val = PARTITIONS["swap"]
val = PARTITIONS["vservers"]
except KeyError as part:
log.write("Missing partition in PARTITIONS: {}\n".format(part))
return 0
bs_request = BootServerRequest.BootServerRequest(vars)
# in upgrade mode, since we skip InstallPartitionDisks
# we need to run this
if upgrade:
log.write("Upgrade mode init : Scanning for devices\n")
systeminfo.get_block_devices_dict(vars, log)
utils.sysexec_noerr("vgscan --mknodes", log)
utils.sysexec_noerr("vgchange -ay", log)
# debugging info - show in either mode
utils.display_disks_status(PARTITIONS, "In InstallBootstrapFS", log)
utils.breakpoint("we need to make /dev/mapper/* appear")
log.write("turning on swap space\n")
utils.sysexec("swapon {}".format(PARTITIONS["swap"]), log)
# make sure the sysimg dir is present
utils.makedirs(SYSIMG_PATH)
log.write("mounting root file system\n")
utils.sysexec(
"mount -t ext3 {} {}".format(PARTITIONS["root"], SYSIMG_PATH), log)
fstype = 'ext3' if vars['virt'] == 'vs' else 'btrfs'
one_partition = vars['ONE_PARTITION'] == '1'
if (not one_partition):
log.write("mounting vserver partition in root file system (type {})\n".
format(fstype))
utils.makedirs(SYSIMG_PATH + "/vservers")
utils.sysexec("mount -t {} {} {}/vservers"\
.format(fstype, PARTITIONS["vservers"], SYSIMG_PATH), log)
if vars['virt'] == 'lxc':
# NOTE: btrfs quota is supported from version: >= btrfs-progs-0.20 (f18+)
# older versions will not recongize the 'quota' command.
log.write(
"Enabling btrfs quota on {}/vservers\n".format(SYSIMG_PATH))
utils.sysexec_noerr(
"btrfs quota enable {}/vservers".format(SYSIMG_PATH))
vars['ROOT_MOUNTED'] = 1
# this is now retrieved in GetAndUpdateNodeDetails
nodefamily = vars['nodefamily']
extensions = vars['extensions']
# in upgrade mode: we need to cleanup the disk to make
# it safe to just untar the new bootstrapfs tarball again
# on top of the hard drive
if upgrade:
CleanupSysimgBeforeUpgrade(SYSIMG_PATH, nodefamily, log)
# the 'plain' option is for tests mostly
plain = vars['plain']
if plain:
download_suffix = ".tar"
uncompress_option = ""
log.write("Using plain bootstrapfs images\n")
else:
download_suffix = ".tar.bz2"
uncompress_option = "-j"
log.write("Using compressed bootstrapfs images\n")
log.write("Using nodefamily={}\n".format(nodefamily))
if not extensions:
log.write("Installing only core software\n")
else:
log.write("Requested extensions {}\n".format(extensions))
bootstrapfs_names = [nodefamily] + extensions
for name in bootstrapfs_names:
tarball = "bootstrapfs-{}{}".format(name, download_suffix)
source_file = "/boot/{}".format(tarball)
dest_file = "{}/{}".format(SYSIMG_PATH, tarball)
source_hash_file = "/boot/{}.sha1sum".format(tarball)
dest_hash_file = "{}/{}.sha1sum".format(SYSIMG_PATH, tarball)
time_beg = time.time()
log.write("downloading {}\n".format(source_file))
# 30 is the connect timeout, 14400 is the max transfer time in
# seconds (4 hours)
result = bs_request.DownloadFile(source_file, None, None, 1, 1,
dest_file, 30, 14400)
time_end = time.time()
duration = int(time_end - time_beg)
log.write("Done downloading ({} seconds)\n".format(duration))
if result:
# Download SHA1 checksum file
log.write("downloading sha1sum for {}\n".format(source_file))
result = bs_request.DownloadFile(source_hash_file, None, None, 1,
1, dest_hash_file, 30, 14400)
log.write("verifying sha1sum for {}\n".format(source_file))
if not utils.check_file_hash(dest_file, dest_hash_file):
raise BootManagerException(
"FATAL: SHA1 checksum does not match between {} and {}"\
.format(source_file, source_hash_file))
time_beg = time.time()
log.write("extracting {} in {}\n".format(dest_file, SYSIMG_PATH))
result = utils.sysexec(
"tar -C {} -xpf {} {}".format(SYSIMG_PATH, dest_file,
uncompress_option), log)
time_end = time.time()
duration = int(time_end - time_beg)
log.write("Done extracting ({} seconds)\n".format(duration))
utils.removefile(dest_file)
else:
# the main tarball is required
if name == nodefamily:
raise BootManagerException(
"FATAL: Unable to download main tarball {} from server."\
.format(source_file))
# for extensions, just issue a warning
else:
log.write(
"WARNING: tarball for extension {} not found\n".format(
name))
# copy resolv.conf from the base system into our temp dir
# so DNS lookups work correctly while we are chrooted
log.write("Copying resolv.conf to temp dir\n")
utils.sysexec("cp /etc/resolv.conf {}/etc/".format(SYSIMG_PATH), log)
# Copy the boot server certificate(s) and GPG public key to
# /usr/boot in the temp dir.
log.write("Copying boot server certificates and public key\n")
if os.path.exists("/usr/boot"):
# do nothing in case of upgrade
if not os.path.exists(SYSIMG_PATH + "/usr/boot"):
utils.makedirs(SYSIMG_PATH + "/usr")
shutil.copytree("/usr/boot", SYSIMG_PATH + "/usr/boot")
elif os.path.exists("/usr/bootme"):
# do nothing in case of upgrade
if not os.path.exists(SYSIMG_PATH + "/usr/bootme"):
utils.makedirs(SYSIMG_PATH + "/usr/boot")
boot_server = file("/usr/bootme/BOOTSERVER").readline().strip()
shutil.copy("/usr/bootme/cacert/" + boot_server + "/cacert.pem",
SYSIMG_PATH + "/usr/boot/cacert.pem")
file(SYSIMG_PATH + "/usr/boot/boot_server", "w").write(boot_server)
shutil.copy("/usr/bootme/pubring.gpg",
SYSIMG_PATH + "/usr/boot/pubring.gpg")
# For backward compatibility
if os.path.exists("/usr/bootme"):
# do nothing in case of upgrade
if not os.path.exists(SYSIMG_PATH + "/mnt/cdrom/bootme"):
utils.makedirs(SYSIMG_PATH + "/mnt/cdrom")
shutil.copytree("/usr/bootme", SYSIMG_PATH + "/mnt/cdrom/bootme")
# ONE_PARTITION => new distribution type
if (vars['ONE_PARTITION'] != '1'):
# Import the GPG key into the RPM database so that RPMS can be verified
utils.makedirs(SYSIMG_PATH + "/etc/pki/rpm-gpg")
utils.sysexec(
"gpg --homedir=/root --export --armor"
" --no-default-keyring --keyring {}/usr/boot/pubring.gpg"
" > {}/etc/pki/rpm-gpg/RPM-GPG-KEY-planetlab".format(
SYSIMG_PATH, SYSIMG_PATH), log)
utils.sysexec_chroot(
SYSIMG_PATH, "rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY-planetlab",
log)
# keep a log on the installed hdd
stamp = file(SYSIMG_PATH + "/bm-install.txt", 'a')
now = time.strftime("%Y-%b-%d @ %H:%M %Z", time.gmtime())
stamp.write("Hard drive installed by BootManager {}\n".format(VERSION))
stamp.write("Finished extraction of bootstrapfs on {}\n".format(now))
# do not modify this, the upgrade code uses this line for checking compatibility
stamp.write("Using nodefamily {}\n".format(nodefamily))
stamp.close()
return 1
def Run(vars, log):
"""
Writes out the following configuration files for the node:
/etc/fstab
/etc/resolv.conf (if applicable)
/etc/ssh/ssh_host_key
/etc/ssh/ssh_host_rsa_key
/etc/ssh/ssh_host_dsa_key
Expect the following variables from the store:
VERSION the version of the install
SYSIMG_PATH the path where the system image will be mounted
(always starts with TEMP_PATH)
PARTITIONS dictionary of generic part. types (root/swap)
and their associated devices.
PLCONF_DIR The directory to store the configuration file in
INTERFACE_SETTINGS A dictionary of the values from the network
configuration file
Sets the following variables:
None
"""
log.write("\n\nStep: Install: Writing configuration files.\n")
# make sure we have the variables we need
try:
VERSION = vars["VERSION"]
if VERSION == "":
raise ValueError("VERSION")
SYSIMG_PATH = vars["SYSIMG_PATH"]
if SYSIMG_PATH == "":
raise ValueError("SYSIMG_PATH")
PARTITIONS = vars["PARTITIONS"]
if PARTITIONS is None:
raise ValueError("PARTITIONS")
PLCONF_DIR = vars["PLCONF_DIR"]
if PLCONF_DIR == "":
raise ValueError("PLCONF_DIR")
INTERFACE_SETTINGS = vars["INTERFACE_SETTINGS"]
if INTERFACE_SETTINGS == "":
raise ValueError("INTERFACE_SETTINGS")
except KeyError as var:
raise BootManagerException(
"Missing variable in vars: {}\n".format(var))
except ValueError as var:
raise BootManagerException(
"Variable in vars, shouldn't be: {}\n".format(var))
log.write("Setting local time to UTC\n")
utils.sysexec_chroot(SYSIMG_PATH,
"ln -sf /usr/share/zoneinfo/UTC /etc/localtime", log)
log.write("Creating system directory {}\n".format(PLCONF_DIR))
if not utils.makedirs("{}/{}".format(SYSIMG_PATH, PLCONF_DIR)):
log.write("Unable to create directory\n")
return 0
log.write("Writing system /etc/fstab\n")
with open("{}/etc/fstab".format(SYSIMG_PATH), "w") as fstab:
fstab.write("{} none swap sw 0 0\n"\
.format(PARTITIONS["swap"]))
fstab.write("{} / ext3 defaults 1 1\n"\
.format(PARTITIONS["root"]))
if (vars['ONE_PARTITION'] != '1'):
if vars['virt'] == 'vs':
fstab.write("{} /vservers ext3 tagxid,defaults 1 2\n"\
.format(PARTITIONS["vservers"]))
else:
fstab.write("{} /vservers btrfs defaults 1 2\n"\
.format(PARTITIONS["vservers"]))
fstab.write("none /proc proc defaults 0 0\n")
fstab.write("none /dev/shm tmpfs defaults 0 0\n")
fstab.write("none /dev/pts devpts defaults 0 0\n")
log.write("Writing system /etc/issue\n")
with open("{}/etc/issue".format(SYSIMG_PATH), "w") as issue:
issue.write("PlanetLab Node: \\n\n")
issue.write("Kernel \\r on an \\m\n")
issue.write("http://www.planet-lab.org\n\n")
if (vars['ONE_PARTITION'] != '1'):
log.write("Setting up authentication (non-ssh)\n")
utils.sysexec_chroot(SYSIMG_PATH, "authconfig --nostart --kickstart --enablemd5 " \
"--enableshadow", log)
utils.sysexec("sed -e 's/^root\:\:/root\:*\:/g' " \
"{}/etc/shadow > {}/etc/shadow.new".format(SYSIMG_PATH, SYSIMG_PATH), log)
utils.sysexec_chroot(SYSIMG_PATH, "mv " \
"/etc/shadow.new /etc/shadow", log)
utils.sysexec_chroot(SYSIMG_PATH, "chmod 400 /etc/shadow", log)
# if we are setup with dhcp, copy the current /etc/resolv.conf into
# the system image so we can run programs inside that need network access
method = ""
try:
method = vars['INTERFACE_SETTINGS']['method']
except:
pass
if method == "dhcp":
utils.sysexec("cp /etc/resolv.conf {}/etc/".format(SYSIMG_PATH), log)
log.write("Writing node install_version\n")
utils.makedirs("{}/etc/planetlab".format(SYSIMG_PATH))
with open("{}/etc/planetlab/install_version".format(SYSIMG_PATH),
"w") as ver:
ver.write("{}\n".format(VERSION))
# for upgrades : do not overwrite already existing keys
log.write("Creating ssh host keys\n")
key_gen_prog = "/usr/bin/ssh-keygen"
# fedora23 seems to come with a release of openssh that lacks suppport
# for ssh1, and thus rsa1 keys; so we consider that failing to produce
# the rsa1 key is not a showstopper
key_specs = [
("/etc/ssh/ssh_host_key", 'rsa1', "SSH1 RSA", False),
("/etc/ssh/ssh_host_rsa_key", 'rsa', "SSH2 RSA", True),
("/etc/ssh/ssh_host_dsa_key", 'dsa', "SSH2 DSA", True),
]
for key_file, key_type, label, mandatory in key_specs:
abs_file = "{}/{}".format(SYSIMG_PATH, key_file)
if not os.path.exists(abs_file):
log.write(
"Generating {} host key {} (mandatory success={})\n".format(
label, key_file, mandatory))
if mandatory:
run = utils.sysexec
run_chroot = utils.sysexec_chroot
else:
run = utils.sysexec_noerr
run_chroot = utils.sysexec_chroot_noerr
run_chroot(
SYSIMG_PATH,
"{} -q -t {} -f {} -C '' -N ''".format(key_gen_prog, key_type,
key_file), log)
run("chmod 600 {}/{}".format(SYSIMG_PATH, key_file), log)
run("chmod 644 {}/{}.pub".format(SYSIMG_PATH, key_file), log)
return 1
def Run(vars, log):
"""
Setup the block devices for install, partition them w/ LVM
Expect the following variables from the store:
INSTALL_BLOCK_DEVICES list of block devices to install onto
TEMP_PATH somewhere to store what we need to run
ROOT_SIZE the size of the root logical volume
SWAP_SIZE the size of the swap partition
"""
log.write("\n\nStep: Install: partitioning disks.\n")
# make sure we have the variables we need
try:
TEMP_PATH = vars["TEMP_PATH"]
if TEMP_PATH == "":
raise ValueError("TEMP_PATH")
INSTALL_BLOCK_DEVICES = vars["INSTALL_BLOCK_DEVICES"]
if (len(INSTALL_BLOCK_DEVICES) == 0):
raise ValueError("INSTALL_BLOCK_DEVICES is empty")
# use vs_ROOT_SIZE or lxc_ROOT_SIZE as appropriate
varname = vars['virt'] + "_ROOT_SIZE"
ROOT_SIZE = vars[varname]
if ROOT_SIZE == "" or ROOT_SIZE == 0:
raise ValueError("ROOT_SIZE invalid")
SWAP_SIZE = vars["SWAP_SIZE"]
if SWAP_SIZE == "" or SWAP_SIZE == 0:
raise ValueError("SWAP_SIZE invalid")
NODE_MODEL_OPTIONS = vars["NODE_MODEL_OPTIONS"]
PARTITIONS = vars["PARTITIONS"]
if PARTITIONS == None:
raise ValueError("PARTITIONS")
if NODE_MODEL_OPTIONS & ModelOptions.RAWDISK:
VSERVERS_SIZE = "-1"
if "VSERVERS_SIZE" in vars:
VSERVERS_SIZE = vars["VSERVERS_SIZE"]
if VSERVERS_SIZE == "" or VSERVERS_SIZE == 0:
raise ValueError("VSERVERS_SIZE")
except KeyError as var:
raise BootManagerException(
"Missing variable in vars: {}\n".format(var))
except ValueError as var:
raise BootManagerException(
"Variable in vars, shouldn't be: {}\n".format(var))
bs_request = BootServerRequest.BootServerRequest(vars)
# disable swap if its on
utils.sysexec_noerr("swapoff {}".format(PARTITIONS["swap"]), log)
# shutdown and remove any lvm groups/volumes
utils.sysexec_noerr("vgscan", log)
utils.sysexec_noerr("vgchange -ay", log)
utils.sysexec_noerr("lvremove -f {}".format(PARTITIONS["root"]), log)
utils.sysexec_noerr("lvremove -f {}".format(PARTITIONS["swap"]), log)
utils.sysexec_noerr("lvremove -f {}".format(PARTITIONS["vservers"]), log)
utils.sysexec_noerr("vgchange -an", log)
utils.sysexec_noerr("vgremove -f planetlab", log)
log.write("Running vgscan for devices\n")
utils.sysexec_noerr("vgscan", log)
used_devices = []
INSTALL_BLOCK_DEVICES.sort()
for device in INSTALL_BLOCK_DEVICES:
if single_partition_device(device, vars, log):
if (len(used_devices) > 0
and (vars['NODE_MODEL_OPTIONS'] & ModelOptions.RAWDISK)):
log.write(
"Running in raw disk mode, not using {}.\n".format(device))
else:
used_devices.append(device)
log.write("Successfully initialized {}\n".format(device))
else:
log.write("Unable to partition {}, not using it.\n".format(device))
continue
# list of devices to be used with vgcreate
vg_device_list = ""
# get partitions
partitions = []
for device in used_devices:
part_path = get_partition_path_from_device(device, vars, log)
partitions.append(part_path)
# create raid partition
raid_partition = create_raid_partition(partitions, vars, log)
if raid_partition != None:
partitions = [raid_partition]
log.write("partitions={}\n".format(partitions))
# initialize the physical volumes
for part_path in partitions:
if not create_lvm_physical_volume(part_path, vars, log):
raise BootManagerException("Could not create lvm physical volume "
"on partition {}".format(part_path))
vg_device_list = vg_device_list + " " + part_path
# create an lvm volume group
utils.sysexec("vgcreate -s32M planetlab {}".format(vg_device_list), log)
# create swap logical volume
utils.sysexec("lvcreate -L{} -nswap planetlab".format(SWAP_SIZE), log)
# check if we want a separate partition for VMs
one_partition = vars['ONE_PARTITION'] == '1'
if (one_partition):
remaining_extents = get_remaining_extents_on_vg(vars, log)
utils.sysexec(
"lvcreate -l{} -nroot planetlab".format(remaining_extents), log)
else:
utils.sysexec("lvcreate -L{} -nroot planetlab".format(ROOT_SIZE), log)
if vars['NODE_MODEL_OPTIONS'] & ModelOptions.RAWDISK and VSERVERS_SIZE != "-1":
utils.sysexec(
"lvcreate -L{} -nvservers planetlab".format(VSERVERS_SIZE),
log)
remaining_extents = get_remaining_extents_on_vg(vars, log)
utils.sysexec(
"lvcreate -l{} -nrawdisk planetlab".format(remaining_extents),
log)
else:
# create vservers logical volume with all remaining space
# first, we need to get the number of remaining extents we can use
remaining_extents = get_remaining_extents_on_vg(vars, log)
utils.sysexec(
"lvcreate -l{} -nvservers planetlab".format(remaining_extents),
log)
# activate volume group (should already be active)
#utils.sysexec(TEMP_PATH + "vgchange -ay planetlab", log)
# make swap
utils.sysexec("mkswap -f {}".format(PARTITIONS["swap"]), log)
# check if badhd option has been set
option = ''
txt = ''
if NODE_MODEL_OPTIONS & ModelOptions.BADHD:
option = '-c'
txt = " with bad block search enabled, which may take a while"
# filesystems partitions names and their corresponding
# reserved-blocks-percentages
filesystems = {"root": 5, "vservers": 0}
# ROOT filesystem is always with ext2
fs = 'root'
rbp = filesystems[fs]
devname = PARTITIONS[fs]
log.write("formatting {} partition ({}){}.\n".format(fs, devname, txt))
utils.sysexec("mkfs.ext2 -q {} -m {} -j {}".format(option, rbp, devname),
log)
# disable time/count based filesystems checks
utils.sysexec_noerr("tune2fs -c -1 -i 0 {}".format(devname), log)
# VSERVER filesystem with btrfs to support snapshoting and stuff
fs = 'vservers'
rbp = filesystems[fs]
devname = PARTITIONS[fs]
if vars['virt'] == 'vs':
log.write("formatting {} partition ({}){}.\n".format(fs, devname, txt))
utils.sysexec(
"mkfs.ext2 -q {} -m {} -j {}".format(option, rbp, devname), log)
# disable time/count based filesystems checks
utils.sysexec_noerr("tune2fs -c -1 -i 0 {}".format(devname), log)
elif not one_partition:
log.write("formatting {} btrfs partition ({}).\n".format(fs, devname))
# early BootCD's seem to come with a version of mkfs.btrfs that does not support -f
# let's check for that before invoking it
mkfs = "mkfs.btrfs"
if os.system("mkfs.btrfs --help 2>&1 | grep force") == 0:
mkfs += " -f"
mkfs += " {}".format(devname)
utils.sysexec(mkfs, log)
# as of 2013/02 it looks like there's not yet an option to set fsck frequency with btrfs
# save the list of block devices in the log
log.write("Block devices used (in lvm): {}\n".format(repr(used_devices)))
# list of block devices used may be updated
vars["INSTALL_BLOCK_DEVICES"] = used_devices
utils.display_disks_status(PARTITIONS, "End of InstallPartitionDisks", log)
return 1
def Run(vars, log):
"""
Unitializes hardware:
- unmount everything mounted during install, except the
/dev/planetlab/root and /dev/planetlab/vservers. This includes
calling swapoff for /dev/planetlab/swap.
Except the following variables from the store:
TEMP_PATH the path to download and store temp files to
SYSIMG_PATH the path where the system image will be mounted
(always starts with TEMP_PATH)
PARTITIONS dictionary of generic part. types (root/swap)
and their associated devices.
Sets the following variables:
None
"""
log.write("\n\nStep: Install: Shutting down installer.\n")
# make sure we have the variables we need
try:
TEMP_PATH = vars["TEMP_PATH"]
if TEMP_PATH == "":
raise ValueError("TEMP_PATH")
SYSIMG_PATH = vars["SYSIMG_PATH"]
if SYSIMG_PATH == "":
raise ValueError("SYSIMG_PATH")
PARTITIONS = vars["PARTITIONS"]
if PARTITIONS == None:
raise ValueError("PARTITIONS")
except KeyError as var:
raise BootManagerException(
"Missing variable in vars: {}\n".format(var))
except ValueError as var:
raise BootManagerException(
"Variable in vars, shouldn't be: {}\n".format(var))
try:
# make sure the required partitions exist
val = PARTITIONS["root"]
val = PARTITIONS["swap"]
val = PARTITIONS["vservers"]
except KeyError as part:
raise BootManagerException(
"Missing partition in PARTITIONS: {}\n".format(part))
try:
# backwards compat, though, we should never hit this case post PL 3.2
os.stat("{}/rcfs/taskclass".format(SYSIMG_PATH))
utils.sysexec_chroot_noerr(SYSIMG_PATH, "umount /rcfs", log)
except OSError as e:
pass
log.write("Shutting down swap\n")
utils.sysexec("swapoff {}".format(PARTITIONS["swap"]), log)
return 1
PARTITIONS= vars["PARTITIONS"]
if PARTITIONS == None:
raise ValueError, "PARTITIONS"
except KeyError, var:
raise BootManagerException, "Missing variable in vars: %s\n" % var
except ValueError, var:
raise BootManagerException, "Variable in vars, shouldn't be: %s\n" % var
try:
# make sure the required partitions exist
val= PARTITIONS["root"]
val= PARTITIONS["swap"]
val= PARTITIONS["vservers"]
except KeyError, part:
raise BootManagerException, "Missing partition in PARTITIONS: %s\n" % part
try:
# backwards compat, though, we should never hit this case post PL 3.2
os.stat("%s/rcfs/taskclass"%SYSIMG_PATH)
utils.sysexec_chroot_noerr( SYSIMG_PATH, "umount /rcfs", log )
except OSError, e:
pass
log.write( "Shutting down swap\n" )
utils.sysexec( "swapoff %s" % PARTITIONS["swap"], log )
return 1
for key_file, key_type, label, mandatory in key_specs:
if not os.path.exists(key_file):
log.write("Creating {} host key {}\n".format(label, key_file))
if mandatory:
run = utils.sysexec
else:
run = utils.sysexec_noerr
run("{} -q -t {} -f {} -C '' -N ''"\
.format(key_gen_prog, key_type, key_file), log)
run("chmod 600 {}".format(key_file), log)
run("chmod 644 {}.pub".format(key_file), log)
# (over)write sshd config
utils.sysexec(
"cp -f {}/sshd_config {}/sshd_config".format(ssh_source_files,
ssh_dir), log)
### xxx ### xxx ### xxx ### xxx ### xxx
# always update the key, may have changed in this instance of the bootmanager
log.write("Installing debug ssh key for root user\n")
if not os.path.isdir(ssh_home):
utils.makedirs(ssh_home)
utils.sysexec(
"cp -f {}/debug_root_ssh_key {}/authorized_keys".format(
ssh_source_files, ssh_home), log)
utils.sysexec("chmod 700 {}".format(ssh_home), log)
utils.sysexec("chmod 600 {}/authorized_keys".format(ssh_home), log)
# start sshd
def CleanupSysimgBeforeUpgrade(sysimg, target_nodefamily, log):
areas_to_cleanup = [
'/boot',
'/usr',
'/var',
'/etc',
'/run',
'/vsys',
]
target_pldistro, target_fcdistro, target_arch = target_nodefamily.split(
'-')
# minimal check : not all configurations are possible...
installed_pldistro, installed_fcdistro, installed_arch = None, None, None
installed_virt = None
prefix = "Using nodefamily "
try:
with open("{}/bm-install.txt".format(sysimg)) as infile:
for line in infile:
if line.startswith(prefix):
installed_nodefamily = line.replace(prefix, "").strip()
installed_pldistro, installed_fcdistro, installed_arch = installed_nodefamily.split(
'-')
# do not break here, bm-install is additive, we want the last one..
with open("{}/etc/planetlab/virt".format(sysimg)) as infile:
installed_virt = infile.read().strip()
except Exception as e:
traceback.print_exc()
raise BootManagerException(
"Could not retrieve data about previous installation - cannot upgrade"
)
# moving from vservers to lxc also means another filesystem
# so plain reinstall is the only option
if installed_virt != 'lxc':
message = """Can only upgrade nodes already running lxc containers
a node running vservers has its /vservers/ partition formatted as ext3
and we need btrfs to move to containers
your only option here is reinstall"""
raise BootManagerException(message)
# changing arch is not reasonable either
if target_arch != installed_arch:
raise BootManagerException(
"Cannot upgrade from arch={} to arch={}".format(
installed_arch, target_arch))
if target_pldistro != installed_pldistro:
log.write(
"\nWARNING: upgrading across pldistros {} to {} - might not work well..\n"
.format(installed_pldistro, target_pldistro))
# otherwise at this point we do not do any more advanced checking
log.write(
"\n\nPseudo step CleanupSysimgBeforeUpgrade : cleaning up hard drive\n"
)
for area in areas_to_cleanup:
utils.sysexec("rm -rf {}/{}".format(sysimg, area))
part_path = get_partition_path_from_device(device, vars, log)
partitions.append(part_path)
# create raid partition
raid_partition = create_raid_partition(partitions, vars, log)
if raid_partition != None:
partitions = [raid_partition]
log.write("PARTITIONS %s\n" % str(partitions))
# initialize the physical volumes
for part_path in partitions:
if not create_lvm_physical_volume(part_path, vars, log):
raise BootManagerException, "Could not create lvm physical volume " "on partition %s" % part_path
vg_device_list = vg_device_list + " " + part_path
# create an lvm volume group
utils.sysexec("vgcreate -s32M planetlab %s" % vg_device_list, log)
# create swap logical volume
utils.sysexec("lvcreate -L%s -nswap planetlab" % SWAP_SIZE, log)
# create root logical volume
utils.sysexec("lvcreate -L%s -nroot planetlab" % ROOT_SIZE, log)
if vars["NODE_MODEL_OPTIONS"] & ModelOptions.RAWDISK and VSERVERS_SIZE != "-1":
utils.sysexec("lvcreate -L%s -nvservers planetlab" % VSERVERS_SIZE, log)
remaining_extents = get_remaining_extents_on_vg(vars, log)
utils.sysexec("lvcreate -l%s -nrawdisk planetlab" % remaining_extents, log)
else:
# create vservers logical volume with all remaining space
# first, we need to get the number of remaining extents we can use
remaining_extents = get_remaining_extents_on_vg(vars, log)
if PARTITIONS == None:
raise ValueError, "PARTITIONS"
except KeyError, var:
raise BootManagerException, "Missing variable in vars: %s\n" % var
except ValueError, var:
raise BootManagerException, "Variable in vars, shouldn't be: %s\n" % var
# mkinitrd needs /dev and /proc to do the right thing.
# /proc is already mounted, so bind-mount /dev here
# xxx tmp - trying to work around the f14 case:
# check that /dev/ is mounted with devtmpfs
# tmp - sysexec_noerr not returning what one would expect
# if utils.sysexec_noerr ("grep devtmpfs /proc/mounts") != 0:
utils.sysexec_noerr("mount -t devtmpfs none /dev")
utils.sysexec("mount -o bind /dev %s/dev" % SYSIMG_PATH)
utils.sysexec("mount -t sysfs none %s/sys" % SYSIMG_PATH)
initrd, kernel_version = systeminfo.getKernelVersion(vars, log)
try:
utils.removefile("%s/boot/%s" % (SYSIMG_PATH, initrd))
except:
print "%s/boot/%s is already removed" % (SYSIMG_PATH, initrd)
# hack for CentOS 5.3
bypassRaidIfNeeded(SYSIMG_PATH, log)
# specify ext3 for fedora14 and above as their default fs is ext4
utils.sysexec_chroot(
SYSIMG_PATH,
"mkinitrd -v --with=ext3 --allow-missing /boot/initrd-%s.img %s" % (kernel_version, kernel_version),
log,
def Run(vars, log):
"""
Load the kernel off of a node and boot to it.
This step assumes the disks are mounted on SYSIMG_PATH.
If successful, this function will not return. If it returns, no chain
booting has occurred.
Expect the following variables:
SYSIMG_PATH the path where the system image will be mounted
(always starts with TEMP_PATH)
ROOT_MOUNTED the node root file system is mounted
NODE_SESSION the unique session val set when we requested
the current boot state
PLCONF_DIR The directory to store PL configuration files in
Sets the following variables:
ROOT_MOUNTED the node root file system is mounted
"""
log.write("\n\nStep: Chain booting node.\n")
# make sure we have the variables we need
try:
SYSIMG_PATH = vars["SYSIMG_PATH"]
if SYSIMG_PATH == "":
raise ValueError("SYSIMG_PATH")
PLCONF_DIR = vars["PLCONF_DIR"]
if PLCONF_DIR == "":
raise ValueError("PLCONF_DIR")
# its ok if this is blank
NODE_SESSION = vars["NODE_SESSION"]
NODE_MODEL_OPTIONS = vars["NODE_MODEL_OPTIONS"]
PARTITIONS = vars["PARTITIONS"]
if PARTITIONS == None:
raise ValueError("PARTITIONS")
except KeyError as var:
raise BootManagerException(
"Missing variable in vars: {}\n".format(var))
except ValueError as var:
raise BootManagerException(
"Variable in vars, shouldn't be: {}\n".format(var))
ROOT_MOUNTED = 0
if vars.has_key('ROOT_MOUNTED'):
ROOT_MOUNTED = vars['ROOT_MOUNTED']
if ROOT_MOUNTED == 0:
log.write("Mounting node partitions\n")
# simply creating an instance of this class and listing the system
# block devices will make them show up so vgscan can find the planetlab
# volume group
systeminfo.get_block_devices_dict(vars, log)
utils.sysexec("vgscan", log)
utils.sysexec("vgchange -ay planetlab", log)
utils.makedirs(SYSIMG_PATH)
cmd = "mount {} {}".format(PARTITIONS["root"], SYSIMG_PATH)
utils.sysexec(cmd, log)
cmd = "mount -t proc none {}/proc".format(SYSIMG_PATH)
utils.sysexec(cmd, log)
cmd = "mount {} {}/vservers".format(PARTITIONS["vservers"],
SYSIMG_PATH)
utils.sysexec(cmd, log)
ROOT_MOUNTED = 1
vars['ROOT_MOUNTED'] = 1
utils.display_disks_status(PARTITIONS, "In ChainBootNode", log)
# write out the session value /etc/planetlab/session
try:
session_file_path = "{}/{}/session".format(SYSIMG_PATH, PLCONF_DIR)
session_file = file(session_file_path, "w")
session_file.write(str(NODE_SESSION))
session_file.close()
session_file = None
log.write("Updated /etc/planetlab/session\n")
except IOError as e:
log.write(
"Unable to write out /etc/planetlab/session, continuing anyway\n")
# update configuration files
log.write("Updating configuration files.\n")
# avoid using conf_files initscript as we're moving to systemd on some platforms
if (vars['ONE_PARTITION'] != '1'):
try:
cmd = "/usr/bin/env python /usr/share/NodeManager/conf_files.py --noscripts"
utils.sysexec_chroot(SYSIMG_PATH, cmd, log)
except IOError as e:
log.write("conf_files failed with \n {}".format(e))
# update node packages
log.write("Running node update.\n")
if os.path.exists(SYSIMG_PATH + "/usr/bin/NodeUpdate.py"):
cmd = "/usr/bin/NodeUpdate.py start noreboot"
else:
# for backwards compatibility
cmd = "/usr/local/planetlab/bin/NodeUpdate.py start noreboot"
utils.sysexec_chroot(SYSIMG_PATH, cmd, log)
# Re-generate initrd right before kexec call
# this is not required anymore on recent depls.
if vars['virt'] == 'vs':
MakeInitrd.Run(vars, log)
# the following step should be done by NM
UpdateNodeConfiguration.Run(vars, log)
log.write("Updating ssh public host key with PLC.\n")
ssh_host_key = ""
try:
ssh_host_key_file = file(
"{}/etc/ssh/ssh_host_rsa_key.pub".format(SYSIMG_PATH), "r")
ssh_host_key = ssh_host_key_file.read().strip()
ssh_host_key_file.close()
ssh_host_key_file = None
except IOError as e:
pass
update_vals = {}
update_vals['ssh_rsa_key'] = ssh_host_key
BootAPI.call_api_function(vars, "BootUpdateNode", (update_vals, ))
# get the kernel version
option = ''
if NODE_MODEL_OPTIONS & ModelOptions.SMP:
option = 'smp'
log.write("Copying kernel and initrd for booting.\n")
if vars['virt'] == 'vs':
utils.sysexec(
"cp {}/boot/kernel-boot{} /tmp/kernel".format(SYSIMG_PATH, option),
log)
utils.sysexec(
"cp {}/boot/initrd-boot{} /tmp/initrd".format(SYSIMG_PATH, option),
log)
else:
# Use chroot to call rpm, b/c the bootimage&nodeimage rpm-versions may not work together
try:
kversion = os.popen("chroot {} rpm -qa kernel | tail -1 | cut -c 8-"\
.format(SYSIMG_PATH)).read().rstrip()
major_version = int(
kversion[0]) # Check if the string looks like a kernel version
except:
# Try a different method for non-rpm-based distributions
kversion = os.popen("ls -lrt {}/lib/modules | tail -1 | awk '{print $9;}'"\
.format(SYSIMG_PATH)).read().rstrip()
utils.sysexec(
"cp {}/boot/vmlinuz-{} /tmp/kernel".format(SYSIMG_PATH, kversion),
log)
candidates = []
# f16/18: expect initramfs image here
candidates.append("/boot/initramfs-{}.img".format(kversion))
# f20: uses a uid of some kind, e.g. /boot/543f88c129de443baaa65800cf3927ce/<kversion>/initrd
candidates.append("/boot/*/{}/initrd".format(kversion))
# Ubuntu:
candidates.append("/boot/initrd.img-{}".format(kversion))
def find_file_in_sysimg(candidates):
import glob
for pattern in candidates:
matches = glob.glob(SYSIMG_PATH + pattern)
log.write("locating initrd: found {} matches in {}\n".format(
len(matches), pattern))
if matches:
return matches[0]
initrd = find_file_in_sysimg(candidates)
if initrd:
utils.sysexec("cp {} /tmp/initrd".format(initrd), log)
else:
raise Exception("Unable to locate initrd - bailing out")
BootAPI.save(vars)
log.write("Unmounting disks.\n")
if (vars['ONE_PARTITION'] != '1'):
utils.sysexec("umount {}/vservers".format(SYSIMG_PATH), log)
utils.sysexec("umount {}/proc".format(SYSIMG_PATH), log)
utils.sysexec_noerr("umount {}/dev".format(SYSIMG_PATH), log)
utils.sysexec_noerr("umount {}/sys".format(SYSIMG_PATH), log)
utils.sysexec("umount {}".format(SYSIMG_PATH), log)
utils.sysexec("vgchange -an", log)
ROOT_MOUNTED = 0
vars['ROOT_MOUNTED'] = 0
# Change runlevel to 'boot' prior to kexec.
StopRunlevelAgent.Run(vars, log)
log.write("Unloading modules and chain booting to new kernel.\n")
# further use of log after Upload will only output to screen
log.Upload("/root/.bash_eternal_history")
# regardless of whether kexec works or not, we need to stop trying to
# run anything
cancel_boot_flag = "/tmp/CANCEL_BOOT"
utils.sysexec("touch {}".format(cancel_boot_flag), log)
# on 2.x cds (2.4 kernel) for sure, we need to shutdown everything
# to get kexec to work correctly. Even on 3.x cds (2.6 kernel),
# there are a few buggy drivers that don't disable their hardware
# correctly unless they are first unloaded.
utils.sysexec_noerr("ifconfig eth0 down", log)
utils.sysexec_noerr("killall dhclient", log)
if vars['virt'] == 'vs':
utils.sysexec_noerr("umount -a -r -t ext2,ext3", log)
else:
utils.sysexec_noerr("umount -a -r -t ext2,ext3,btrfs", log)
utils.sysexec_noerr("modprobe -r lvm-mod", log)
# modules that should not get unloaded
# unloading cpqphp causes a kernel panic
blacklist = ["floppy", "cpqphp", "i82875p_edac", "mptspi"]
try:
modules = file("/tmp/loadedmodules", "r")
for line in modules:
module = string.strip(line)
if module in blacklist:
log.write(
"Skipping unload of kernel module '{}'.\n".format(module))
elif module != "":
log.write("Unloading {}\n".format(module))
utils.sysexec_noerr("modprobe -r {}".format(module), log)
if "e1000" in module:
log.write(
"Unloading e1000 driver; sleeping 4 seconds...\n")
time.sleep(4)
modules.close()
except IOError:
log.write("Couldn't read /tmp/loadedmodules, continuing.\n")
try:
modules = file("/proc/modules", "r")
# Get usage count for USB
usb_usage = 0
for line in modules:
try:
# Module Size UsageCount UsedBy State LoadAddress
parts = string.split(line)
if parts[0] == "usb_storage":
usb_usage += int(parts[2])
except IndexError as e:
log.write("Couldn't parse /proc/modules, continuing.\n")
modules.seek(0)
for line in modules:
try:
# Module Size UsageCount UsedBy State LoadAddress
parts = string.split(line)
# While we would like to remove all "unused" modules,
# you can't trust usage count, especially for things
# like network drivers or RAID array drivers. Just try
# and unload a few specific modules that we know cause
# problems during chain boot, such as USB host
# controller drivers (HCDs) (PL6577).
# if int(parts[2]) == 0:
if False and re.search('_hcd$', parts[0]):
if usb_usage > 0:
log.write("NOT unloading {} since USB may be in use\n".
format(parts[0]))
else:
log.write("Unloading {}\n".format(parts[0]))
utils.sysexec_noerr("modprobe -r {}".format(parts[0]),
log)
except IndexError as e:
log.write("Couldn't parse /proc/modules, continuing.\n")
except IOError:
log.write("Couldn't read /proc/modules, continuing.\n")
kargs = "root={} ramdisk_size=8192".format(PARTITIONS["root"])
if NODE_MODEL_OPTIONS & ModelOptions.SMP:
kargs = kargs + " " + "acpi=off"
try:
kargsfb = open("/kargs.txt", "r")
moreargs = kargsfb.readline()
kargsfb.close()
moreargs = moreargs.strip()
log.write(
'Parsed in "{}" kexec args from /kargs.txt\n'.format(moreargs))
kargs = kargs + " " + moreargs
except IOError:
# /kargs.txt does not exist, which is fine. Just kexec with default
# kargs, which is ramdisk_size=8192
pass
utils.sysexec_noerr('hwclock --systohc --utc ', log)
# utils.breakpoint("Before kexec");
try:
utils.sysexec(
'kexec --force --initrd=/tmp/initrd --append="{}" /tmp/kernel'.
format(kargs), log)
except BootManagerException as e:
# if kexec fails, we've shut the machine down to a point where nothing
# can run usefully anymore (network down, all modules unloaded, file
# systems unmounted. write out the error, and cancel the boot process
log.write("\n\n")
log.write("-------------------------------------------------------\n")
log.write("kexec failed with the following error. Please report\n")
log.write("this problem to [email protected].\n\n")
log.write(str(e) + "\n\n")
log.write("The boot process has been canceled.\n")
log.write(
"-------------------------------------------------------\n\n")
return
def Run(vars, log):
"""
See if a node installation is valid. More checks should certainly be
done in the future, but for now, make sure that the sym links kernel-boot
exist in /boot
Expect the following variables to be set:
SYSIMG_PATH the path where the system image will be mounted
(always starts with TEMP_PATH)
ROOT_MOUNTED the node root file system is mounted
NODE_ID The db node_id for this machine
PLCONF_DIR The directory to store the configuration file in
Set the following variables upon successfully running:
ROOT_MOUNTED the node root file system is mounted
"""
log.write("\n\nStep: Validating node installation.\n")
# make sure we have the variables we need
try:
SYSIMG_PATH = vars["SYSIMG_PATH"]
if SYSIMG_PATH == "":
raise ValueError("SYSIMG_PATH")
NODE_ID = vars["NODE_ID"]
if NODE_ID == "":
raise ValueError("NODE_ID")
PLCONF_DIR = vars["PLCONF_DIR"]
if PLCONF_DIR == "":
raise ValueError("PLCONF_DIR")
NODE_MODEL_OPTIONS = vars["NODE_MODEL_OPTIONS"]
PARTITIONS = vars["PARTITIONS"]
if PARTITIONS == None:
raise ValueError("PARTITIONS")
except KeyError as var:
raise BootManagerException("Missing variable in vars: {}\n".format(var))
except ValueError as var:
raise BootManagerException("Variable in vars, shouldn't be: {}\n".format(var))
ROOT_MOUNTED = 0
if vars.has_key('ROOT_MOUNTED'):
ROOT_MOUNTED = vars['ROOT_MOUNTED']
# mount the root system image if we haven't already.
# capture BootManagerExceptions during the vgscan/change and mount
# calls, so we can return 0 instead
if ROOT_MOUNTED == 0:
# simply creating an instance of this class and listing the system
# block devices will make them show up so vgscan can find the planetlab
# volume group
systeminfo.get_block_devices_dict(vars, log)
try:
utils.sysexec("vgscan", log)
utils.sysexec("vgchange -ay planetlab", log)
except BootManagerException as e:
log.write("BootManagerException during vgscan/vgchange: {}\n".format(e))
return 0
utils.makedirs(SYSIMG_PATH)
# xxx - TODO - need to fsck the btrfs partition
if vars['virt'] == 'vs':
filesystems_tocheck = ['root', 'vservers']
else:
filesystems_tocheck = ['root']
for filesystem in filesystems_tocheck:
try:
# first run fsck to prevent fs corruption from hanging mount...
log.write("fsck {} file system\n".format(filesystem))
utils.sysexec("e2fsck -v -p {}".format(PARTITIONS[filesystem]), log, fsck=True)
except BootManagerException as e:
log.write("BootManagerException during fsck of {} ({}) filesystem : {}\n"\
.format(filesystem, PARTITIONS[filesystem], str(e)))
try:
log.write("Trying to recover filesystem errors on {}\n".format(filesystem))
utils.sysexec("e2fsck -v -y {}".format(PARTITIONS[filesystem]), log, fsck=True)
except BootManagerException as e:
log.write("BootManagerException while trying to recover"
"filesystem errors on {} ({}) filesystem : {}\n"
.format(filesystem, PARTITIONS[filesystem], str(e)))
return -1
else:
# disable time/count based filesystems checks
utils.sysexec_noerr("tune2fs -c -1 -i 0 {}".format(PARTITIONS[filesystem]), log)
try:
# then attempt to mount them
log.write("mounting root file system\n")
utils.sysexec("mount -t ext3 {} {}".format(PARTITIONS["root"], SYSIMG_PATH),log)
except BootManagerException as e:
log.write("BootManagerException during mount of /root: {}\n".format(str(e)))
return -2
try:
PROC_PATH = "{}/proc".format(SYSIMG_PATH)
utils.makedirs(PROC_PATH)
log.write("mounting /proc\n")
utils.sysexec("mount -t proc none {}".format(PROC_PATH), log)
except BootManagerException as e:
log.write("BootManagerException during mount of /proc: {}\n".format(str(e)))
return -2
one_partition = vars['ONE_PARTITION']=='1'
if (not one_partition):
try:
VSERVERS_PATH = "{}/vservers".format(SYSIMG_PATH)
utils.makedirs(VSERVERS_PATH)
log.write("mounting vservers partition in root file system\n")
if vars['virt'] == 'vs':
utils.sysexec("mount -t ext3 {} {}".format(PARTITIONS["vservers"], VSERVERS_PATH), log)
else:
utils.sysexec("mount -t btrfs {} {}".format(PARTITIONS["vservers"], VSERVERS_PATH), log)
except BootManagerException as e:
log.write("BootManagerException while mounting /vservers: {}\n".format(str(e)))
return -2
ROOT_MOUNTED = 1
vars['ROOT_MOUNTED'] = 1
# check if the base kernel is installed
# these 2 links are created by our kernel's post-install scriplet
log.write("Checking for a custom kernel\n")
try:
if vars['virt'] == 'vs':
os.stat("{}/boot/kernel-boot".format(SYSIMG_PATH))
else:
try:
kversion = os.popen("chroot {} rpm -qa kernel | tail -1 | cut -c 8-"\
.format(SYSIMG_PATH)).read().rstrip()
os.stat("{}/boot/vmlinuz-{}".format(SYSIMG_PATH, kversion))
major_version = int(kversion[0]) # Check if the string looks like a kernel version
except:
kversion = os.popen("ls -lrt {}/lib/modules | tail -1 | awk '{print $9;}'"\
.format(SYSIMG_PATH)).read().rstrip()
except OSError as e:
log.write("Couldn't locate base kernel (you might be using the stock kernel).\n")
return -3
# check if the model specified kernel is installed
option = ''
if NODE_MODEL_OPTIONS & ModelOptions.SMP:
option = 'smp'
try:
os.stat("{}/boot/kernel-boot{}".format(SYSIMG_PATH, option))
except OSError as e:
# smp kernel is not there; remove option from modeloptions
# such that the rest of the code base thinks we are just
# using the base kernel.
NODE_MODEL_OPTIONS = NODE_MODEL_OPTIONS & ~ModelOptions.SMP
vars["NODE_MODEL_OPTIONS"] = NODE_MODEL_OPTIONS
log.write("WARNING: Couldn't locate smp kernel.\n")
# write out the node id to /etc/planetlab/node_id. if this fails, return
# 0, indicating the node isn't a valid install.
try:
node_id_file_path = "{}/{}/node_id".format(SYSIMG_PATH, PLCONF_DIR)
node_id_file = file(node_id_file_path, "w")
node_id_file.write(str(NODE_ID))
node_id_file.close()
node_id_file = None
log.write("Updated /etc/planetlab/node_id\n")
except IOError as e:
log.write("Unable to write out /etc/planetlab/node_id\n")
return 0
log.write("Node installation appears to be ok\n")
return 1
vserver_dir )
utils.sysexec_noerr( "echo '%s' > %s/etc/%s" %
(UPDATE_FILE_FLAG,vserver_dir,UPDATE_FILE_FLAG),
log )
update_files= 1
if update_files:
log.write( "Updating network files in %s.\n" % vserver_dir )
try:
# NOTE: this works around a recurring problem on public pl,
# suspected to be due to mismatch between 2.6.12 bootcd and
# 2.6.22/f8 root environment. files randomly show up with the
# immutible attribute set. this clears it before trying to write
# the files below.
utils.sysexec( "chattr -i %s/etc/hosts" % vserver_dir , log )
utils.sysexec( "chattr -i %s/etc/resolv.conf" % vserver_dir , log )
except:
pass
file_path= "%s/etc/hosts" % vserver_dir
hosts_file= file(file_path, "w" )
hosts_file.write( "127.0.0.1 localhost\n" )
if method == "static":
hosts_file.write( "%s %s.%s\n" % (ip, hostname, domainname) )
hosts_file.close()
hosts_file= None
file_path= "%s/etc/resolv.conf" % vserver_dir
if method == "dhcp":
